Hornby A1X 'Terrier' 643 LB&SCR Marsh Brown

A1X 'Terrier' 643 LB&SCR Marsh Brown The famous LB&SCR A1/A1X 0-6-0 Terrier is back for the 2026 range launch, utilising the highly accurate OO Gauge tooling suite that expertly captures the charming characteristics of the southern steam engine. It has been designed for smooth and reliable operation, including the provision for digital command control via a 6-pin decoder socket. This particular example depicts No.643 in London Brighton & South Coast Railway Marsh Brown. Model Specification: Expertly moulded die-cast body and chassis for added realism and weight Number of separately fitted parts, including smokebox door, water filler caps, handrails, lamp irons and buffers Brass connector rods with metal securing pins Detailed cab interior with painted instrument dials Pivoting NEM sockets for improved coupling around tight curves Precision-engineered coreless motor for smooth running All-wheel pick-ups Accessory pack minimum 2nd radius Electronics: 6-Pin DCC Decoder socket compatible with HM7000 system Tooling: Stroudley chimney Flush smokebox door Four lamp brackets on front and rear Low bufferstock with no lamp brackets Steam pipes Small cab bunker with no coal rails Westinghouse pump Livery: LB&SCR Marsh Brown Accurate colours and typefaces - OO Scale

Hornby A1X 'Terrier' 72 'Fenchurch' Newhaven Harbour Company

A1X 'Terrier' 72 'Fenchurch' Newhaven Harbour Company The famous LB&SCR A1/A1X 0-6-0 Terrier is back for the 2026 range launch, utilising the highly accurate OO Gauge tooling suite that expertly captures the charming characteristics of the southern steam engine. It has been designed for smooth and reliable operation, including the provision for digital command control via a 6-pin decoder socket. This particular example depicts No.72 ‘Fenchurch’ in Newhaven Harbour Company lined black. Model Specification: Expertly moulded die-cast body and chassis for added realism and weight Number of separately fitted parts, including smokebox door, water filler caps, handrails, lamp irons and buffers Brass connector rods with metal securing pins Detailed cab interior with painted instrument dials Pivoting NEM sockets for improved coupling around tight curves Precision-engineered coreless motor for smooth running All-wheel pick-ups Accessory pack Minimum 2nd radius Electronics: 6-Pin DCC Decoder socket compatible with HM7000 system Tooling: Stroudley chimney Rivetted smokebox door Six lamp brackets on front and rear  Low bufferstock with lamp brackets Steam pipes removed Small cab bunker with no coal rails Westinghouse pump Livery: Newhaven Harbour Company lined black Accurate colours and typefaces - OO Scale

Hornby Railroad: Class 3F 'Jinty' Hart and Weaver Limited No.5

Railroad: Class 3F 'Jinty' Hart and Weaver Limited No.5 The LMS ‘Jinties’ were used widely for shunting and station pilot duties and were so versatile, they were even capable of running at speeds of up to 60mph. When the first diesel shunters started to be introduced, surplus ‘Jinties’ were sold to industrial users and some received bright liveries, such as this fictitious, but highly attractive, blue ‘Hart & Weaver’ livery.  This OO gauge RailRoad model of "Jinty" No.5 is perfect for shunting your industrial sidings. - DCC Ready 6-Pin Socket - OO Scale

Hornby SECR H Class 161 SECR Green

SECR H Class 161 SECR Green This OO gauge SECR H Class locomotive model is a faithful representation of Harry Wainwright's H Class. With sprung metal buffers and NEM tension lock couplings, this model is DCC ready with an 8-pin socket ready for upgrading to digital control.  Designed by Harry Wainwright, 66 of these locomotives were built for the South Eastern & Chatham Railway at its Ashford Works between 1904 and 1915 for London suburban and semi-fast trains. Completed in June 1909, 161 engines carried the elaborate SECR livery, like the locomotive depicted by the model, until receiving a lined olive green livery when taken into SR stock and renumbered 1161 at the Grouping in 1923.  It later became BR 31161 and was withdrawn at Tunbridge Wells West in November 1961 after a creditable 51 years and 5 months’ service - DCC Ready 6-Pin Socket - OO Scale

Hornby L&MR Robert Stephenson’s 'Rocket'

L&MR Robert Stephenson’s 'Rocket'  For the first time, Stephenson's Rocket is presented as a solo locomotive, with a sleek yellow livery, fixed metal buffers and chain couplings. This highly detailed, diminuitive locomotive model is a must-have model for steam collectors, due to its historical importance and incredible model engineering.  This historically important locomotive was built in 1929 to participate in the Rainhill Trials, a competition set-up by the promoters of the Liverpool and Manchester Railway to find suitable motive power for its opening the following year. Built to the order of his father George (who was the L&MR’s principal engineer at the time), ‘Rocket’ was designed by Robert Stephenson and built at his Forth Street Works in Newcastle-upon-Tyne.  The design was the most advanced in its day and ‘Rocket’ won the Trials. The locomotive then became one of four that took part in the L&MR’s opening parade in September 1930. - DCC Ready 6-Pin Socket - OO Scale

Hornby Birth of the Railways Train Pack (Railway 200)

Birth of the Railways Train Pack (Railway 200) Representing the formative years of steam-powered railways, these three locomotives were built between 1825 and 1838. The first is ‘Locomotion No. 1’, designed by George and Robert Stephenson. It was built at their factory in Newcastle for the opening of the Stockton & Darlington Railway, where it became the first steam locomotive to pull a passenger train on a public railway. In doing so, it became the first steam locomotive to both operate and haul a passenger-carrying train on a public railway in September 1825. 2025 marks the 200th anniversary. With the experience they gained, Robert Stephenson & Co. entered a design for the 1829 Rainhill Trials, held to find suitable motive power for the Liverpool & Manchester Railway. Their entry, ‘Rocket’, was the clear winner and formed the basis for future steam locomotive design on the L&MR, which opened the following year. By 1838, locomotive design had already moved on, and 0-4-2 No. 57 ‘Lion’, was one of a pair of ‘luggage’ locomotives built to a Stephenson patent by Todd, Kitson & Laird of Leeds, also for the L&MR. Please note: Locomotion No.1 comes fitted with a Next 18-pin socket, but due to the locomotive's size limitations, sadly it cannot take an HM7000 Next 18-pin decoder. The 'Rocket' locomotive comes fitted with a 6-pin socket. The 'Lion' locomotive comes fitted with a Next 18 socket (NEM 662). - OO Scale