Hornby HM7000: 6 BLE Decoder 6 Pin w/ Fine Wire (No Sound)

HM7000: 6 BLE Decoder 6 Pin w/ Fine Wire (No Sound) Part of the innovative HM7000 range, this new 6-pin Bluetooth® and DCC decoder is designed to get smaller locomotives working on the HM7000 system. The 6-pin connectors are located on the end of flexible wires, giving you more flexibility when installing the decoder in models with limited space. The decoder is designed to supply 1000mA continuous load to the main motor and a peak demand of 1500mA, making it highly suitable for most N scale locos and small TT, HO and OO locomotives. An R7377 Power Bank can be purchased separately and added to this decoder. We recommend for ease you do this during the first install. The Power Bank will keep the loco operating during short power outages when running over dirty track or complex points.

Hornby HM7000: Power Bank Maxi

HM7000: Power Bank Maxi The R7416 Power Bank Maxi is our largest power bank and will keep locomotives with larger motors that require more pulling power, running over any potential dead spots. The space require inside a locomotive for this power bank is 22 x 12 x 10mm.  The Power Bank Maxi can be connected into the current range of HM7000 DCC Bluetooth decoders. A simple plug & play socket means there's no soldering required! Why use one? Your layout will occasionally suffer from dirty track or small electrical dead spots at points and crossings. The small loss of power can cause locomotives to stop, but with DCC Sound Decoders it can also cause the sounds to reset and restart. Avoid both issues by fitting a Power Bank. Perfect locomotive running and optimal control! (The Power Bank is not suitable for use without an HM7000 decoder, connecting it directly to other decoders or directly to the wiring of a model locomotive may cause damage to the Power Bank, your locomotive or your non-HM7000 decoder). For small locomotives we have a smaller Power Bank available R7377 Power Bank

Hornby RailRoad: Class 73 73235 Intercity Swallow

RailRoad: Class 73 73235 Intercity Swallow The Railroad Class 73 is the perfect mixed traffic locomotive and is ideally suited for both use on InterCity services and short freight workings across Southern England. Decorated in the colourful tri-colour scheme of BR InterCity Swallow, 73235 would be a small but mighty addition to your model railway collection. Model specification: Railroad specification Class 73 model Durable bodyshell Reliable motor for continued and long-lasting use Accurate livery application Electronics: 21-pin DCC decoder socket compatible with HM7000 system Livery: BR InterCity Swallow Headcodes displaying ‘20’ at one end and red markers at the other - OO Scale

Hornby RailRoad: Class 73 73235 Intercity Swallow (Sound Fitted)

RailRoad: Class 73 73235 Intercity Swallow (Sound Fitted) The Railroad Class 73 is the perfect mixed traffic locomotive and is ideally suited for both use on InterCity services and short freight workings across Southern England. Decorated in the colourful tri-colour scheme of BR InterCity Swallow, 73235 would be a small but mighty addition to your model railway collection.  This model is fitted with a TXS sound decoder for added realism when running on DCC layouts. Model specification: Railroad specification Class 73 model Durable bodyshell Reliable motor for continued and long-lasting use Accurate livery application Electronics: 21-pin DCC Sound decoder fitted compatible with HM7000 system Realistic sound profile based on recordings of Class 73 locomotives Livery: BR InterCity Swallow Headcodes displaying ‘20’ at one end and red markers at the other - OO Scale

Hornby RailRoad: Class 800 Great British Railways Train Pack

RailRoad: Class 800 Great British Railways Train Pack Utilising the popular Railroad Class 800 tooling, we are thrilled to present a vision of the future: an Azuma in Great British Railways livery! Based on official documentation of what passenger trains will look like under GBR, this Class 800 train pack consisting of a driving car and dummy car makes for a striking addition to your train set or model railway! Model Specification: Railroad specification Class 800 model Durable bodyshell Reliable motor for continued and long-lasting use Directional Lighting DCC Ready Matches induvial passenger coaches R40570/R40571/R40572 Electronics: 21-pin DCC decoder socket compatible with HM7000 system Compatible with R7322 HM7000-21TXS Sound Decoder and speaker Space for HM7070 power bank for uninterrupted running Livery: Great British Railways - OO Scale  

Hornby RailRoad: Peppercorn A1 60163 'Tornado' BR Lined Apple Green

RailRoad: Peppercorn A1 60163 'Tornado' BR Lined Apple Green Peppercorn A1 60163 ‘Tornado’, a true icon of the current railway scene, rejoins the RailRoad range in a new livery scheme: Apple Green with British Railway tender lettering. Designed to be robust this RailRoad model features fully working piston and connecting rods, accurate paint application and DCC capability. Model Specification: RailRoad specification Peppercorn A1 Moulded details Working running gear NEM coupling sockets Accessory Pack Minimum 2nd Radius Electronics: 21-pin DCC decoder socket compatible with HM7000 system Livery: British Railways lined apple green Modern warning flashes - OO Scale  

Hornby RailRoad: Peppercorn A1 60163 ‘Tornado’ BR Apple Green (Sound)

RailRoad: Peppercorn A1 60163 ‘Tornado’ BR Lined Apple Green (Sound Fitted) Peppercorn A1 60163 ‘Tornado’, a true icon of the current railway scene, rejoins the RailRoad range in a new livery scheme: Apple Green with British Railway tender lettering. Designed to be robust this RailRoad model features fully working piston and connecting rods, accurate paint application and DCC capability. Model Specification: RailRoad specification Peppercorn A1 Moulded details Working running gear NEM coupling sockets Accessory Pack Minimum 2nd Radius DCC Sound: Pre fitted 21-pin DCC Sound decoder, compatible with HMRA compliant systems and HM7000 High fidelity sound profile assembled from recordings of 60163 Tornado Livery: British Railways lined apple green Modern warning flashes - OO Scale  

Hornby Robert Stephenson’s L&MR ‘Planet’

Robert Stephenson’s L&MR ‘Planet’ Building on the success of our other Era 1 steam locomotives, ‘Planet’ is an impeccable replication of the historic Stephenson design, utilising high quality diecast and plastic mouldings to capture the distinctive shape of the locomotive. Initially available in its preserved condition, this wonderful model will be a great addition to any model railway collection. Model Specification: High detail model of replica L&MR Planet locomotive based on extensive research Diecast locomotive chassis and tender body Coreless motor All-wheel pick up High detail cab backhead Decorated crew figures Separate buffers Numerous separately fitted parts such as steam pipes, control levers, strengthening truss rods, and handrails Accessory Bag Minimum 2nd radius Electronics: Next18 DCC decoder socket compatible with HM7000 system Livery: As preserved in the Manchester Science Museum Wood grain printing on boiler Gold plated dome and boiler details - OO Scale

Hornby RailRoad: GWR County 1023 'County of Oxford' GW Lined Green

RailRoad: GWR County 1023 'County of Oxford' GW Lined Green The ‘County’ Class was the last of the GWR-designed two-cylinder 4-6-0s, with 30 built at Swindon between 1945 and 1947 to the design of Chief Mechanical Engineer, Frederick Hawksworth. This latest RailRoad County Class model depicts No. 1023 ‘County of Oxford’ in Great Western lined green. Model specification: RailRoad specification model of County Class Moulded details Working running gear NEM coupling sockets Accessory Pack Minimum 2nd Radius Electronics: 21-pin DCC Decoder socket compatible with HM7000 Livery: Great Western lined green with GW tender crest Accurate colours and font - OO Scale

Hornby Merchant Navy 35028 'Clan Line' BR Green (Early) (Sound/Smoke)

Merchant Navy 35028 'Clan Line' BR Green (Early) (Sound/Smoke) This highly detailed model represents famed 'Spam Can' No.35028 ‘Clan Line’ in British Railways lined green livery with early cycling lion emblem on the tender. A must-have model for Southern Region collectors, this feature-packed locomotive is pre-fitted with HM7000 control, for the most satisfying model railway experience yet. Please Note: This model requires a DCC controller or the HM7000 App to control. Model Specification: High detail OO gauge model based on extensive research and original works drawings Die-cast chassis, pony truck and trailing truck Die-cast connecting rods and valve gear High detail cab and fully decorated backhead with decorated instrument dials Large number of separately fitted parts Separately fitted simulated coal load with fully detailed tender bunker Powerful 5 pole skew wound motor Electrical pickups on main drive wheels and tender wheels 8-way locomotive to tender drawbar, with integrated electrical connection for easy coupling and decoupling Pogo pin wheel pickup arrangement for easy pickup servicing Brass main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Accessory bag contains tablet catcher, vacuum pipes, lamps and couplings Minimum 2nd Radius curves Steam Generator: Pre-fitted Gen 2 steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Water reservoir large enough for 20 minutes of continuous steam running Adjustable steam output settings via the decoder Electronics: Pre-fitted 21-Pin HM7000 decoder and speaker. Compatible with NMRA DCC controllers and HM7000 system HM7000 Power Bank compatible DCC Sound: Pre-installed Merchant Navy sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect. Assembled using live recordings of Merchant Navy locomotives Tender speaker Livery: BR Lined Green with ‘Cycling Lion’ early emblem on tender Clan Line etched nameplates Semi-gloss finish Accurate colours and fonts - OO Scale

Hornby LNER A4 60002 ‘Sir Murrough Wilson' BR Green (Sound/Smoke)

LNER A4 60002 ‘Sir Murrough Wilson' BR Green (Sound/Smoke) The famous LNER A4 pacific, known for its streamlined casing, returns to the range as No. 60002 ‘Sir Murrough Wilson’ fitted with steam generator and DCC Sound functionality, as well as working lights and tender lights. This gorgeous Gresley locomotive is highly detailed, featuring a great number of intricate separate parts, and would make for a standout addition to any early British Railways model railway collection. Please Note: This model requires a DCC controller or the HM7000 App to control. Model Specification: High detail OO gauge model based on extensive research and original works drawings Die-cast chassis and boiler Die-cast connecting rods and valve gear High detail cab and fully decorated back head with decorated instrument dials Decorated crew figures Turned brass safety valves Large number of separately fitted parts Separately fitted simulated coal load with fully detailed tender bunker Powerful 5 pole skew wound motor Electrical pickups on main drive wheels and tender wheels Quick release locomotive to tender connector Pogo pin wheel pickup arrangement for easy pickup servicing Brass main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Working lights  Working Tender Lights Accessory bag contains tablet catcher, vacuum pipes, lamps and couplings Minimum 2nd Radius curves Steam Generator: Pre-fitted Gen 2 steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Water reservoir large enough for 20 minutes of continuous steam running Adjustable steam output settings via the decoder Electronics: Pre-fitted 21-Pin HM7000 decoder and speaker. Compatible with NMRA DCC controllers and HM7000 system HM7000 Power Bank compatible Flickering firebox DCC Sound: Pre-installed LNER A4 sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect. Assembled using live recordings of LNER A4 locomotives Tender speaker Tooling: Smokebox door numberplate Single Chimney Non-Corridor Tender Side valence removed Livery: BR Lined Green Named ‘Sir Murrough Wilson’ Cycling Lion on tender Accurate colours and fonts - OO Scale

Hornby LNER A4 60024 'Kingfisher' BR Exp. Ultramarine (Sound/Smoke)

LNER A4 60024 'Kingfisher' BR Experimental Ultramarine (Sound/Smoke) The famous LNER A4 pacific, known for its streamlined casing, returns to the range as No. 60024 ‘Kingfisher’ fitted with steam generator and DCC Sound functionality, as well as working lights and tender lights.  This gorgeous Gresley locomotive is highly detailed, featuring a great number of intricate separate parts, and would make for a standout addition to any LNER model railway collection. Please Note: This model requires a DCC controller or the HM7000 App to control. Model Specification: High detail OO gauge model based on extensive research and original works drawings Die-cast chassis and boiler Die-cast connecting rods and valve gear High detail cab and fully decorated back head with decorated instrument dials Decorated crew figures Turned brass safety valves Large number of separately fitted parts Separately fitted simulated coal load with fully detailed tender bunker Powerful 5 pole skew wound motor Electrical pickups on main drive wheels and tender wheels Quick release locomotive to tender connector Pogo pin wheel pickup arrangement for easy pickup servicing Brass main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Working lights  Working Tender Lights Accessory bag contains tablet catcher, vacuum pipes, lamps and couplings Minimum 2nd Radius curves Steam Generator: Pre-fitted Gen 2 steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Water reservoir large enough for 20 minutes of continuous steam running Adjustable steam output settings via the decoder Electronics: Pre-fitted 21-Pin HM7000 decoder and speaker. Compatible with NMRA DCC controllers and HM7000 system HM7000 Power Bank compatible Flickering firebox DCC Sound: Pre-installed LNER A4 sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect. Assembled using live recordings of LNER A4 locomotives Tender speaker Tooling: Smokebox door numberplate Single Chimney Corridor Tender Side valence removed Livery: BR Express Blue Named ‘Kingfisher’ British Railways lettering on tender Accurate colours and fonts - OO Scale

Hornby GWR Saint 2945 'Hillingdon Court' GWR Lined Green

GWR Saint 2945 'Hillingdon Court' GWR Lined Green We are delighted to present the next run of OO Gauge GWR Saint Class locomotives in this months range launch, with this particular example being No. 2945 ‘Hillingdon Court’ in Great Western lined green. Utilising the same highly acclaimed tooling used on the first run of Saints last year, this latest release takes the model one step further by the inclusion of a revised cab footplate for improved running, as well as being DCC ready via a 21-pin decoder socket, perfect for the HM7000 system. Model Specification: High detail OO Gauge model based on extensive research and original works drawings Die-cast Chassis and Running Plate. Model Weight is 341 grams High detail cab and fully decorated backhead with decorated instrument dials Etched metal nameplates Powerful 5 Pole Skew wound motor Quick release locomotive to tender connector Pogo pin wheel pickup arrangement for easy pickup servicing Electrical pickups on main drive wheels and tender wheels Die-cast Piston Rods & valve gear Fully decorated crew figures Prototypical size metal handrails with brass stanchions Brass main drive bearings Sprung metal buffers Front and Rear NEM coupling pocket Separately fitted lamps. Lamp code can be changed Separately fitted simulated coal load Improved cab footplate design Electronics: HM7000 21-Pin DCC decoder compatible HM7000 Power Bank compatible Illuminated flickering firebox Tooling: Tall Chimney Safety valve with top feeds Later curved footplate Fluted piston rods Early boiler Churchward tender Livery: GWR Lined Green Great Western tender lettering Accurate colours and fonts - OO Scale

Hornby GWR Saint 2980 'Coeur de Lion' GWR Lined Green (Sound/Smoke)

GWR Saint 2980 'Coeur de Lion' GWR Lined Green (Sound/Smoke) We are delighted to present the next run of OO Gauge GWR Saint Class locomotives in this months range launch, with this particular example being No. 2980 ‘Coeur de Lion’ in Great Western lined green. Utilising the same highly acclaimed tooling used on the first run of Saints last year, this latest release takes the model one step further by the inclusion of a DCC Sound decoder and speaker, 2nd generation steam generator, and revised cab footplate for improved running. Model Specification: High detail OO Gauge model based on extensive research and original works drawings Die-cast Chassis and Running Plate. Model Weight is 341 grams High detail cab and fully decorated backhead with decorated instrument dials Etched metal nameplates Powerful 5 Pole Skew wound motor Quick release locomotive to tender connector Pogo pin wheel pickup arrangement for easy pickup servicing Electrical pickups on main drive wheels and tender wheels Die-cast Piston Rods & valve gear Fully decorated crew figures Prototypical size metal handrails with brass stanchions Brass main drive bearings Sprung metal buffers Front and Rear NEM coupling pocket Separately fitted lamps. Lamp code can be changed Separately fitted simulated coal load Improved cab footplate design Steam Generator: Pre-fitted Gen 2 steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Water reservoir large enough for 20 minutes of continuous steam running Adjustable steam output settings via the decoder Electronics: 21-Pin DCC Sound decoder pre-fitted HM7000 Power Bank compatible Illuminated flickering firebox DCC Sound: Pre-installed Saint Class sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect. Assembled using live recordings of Saint Class locomotives Tender speaker Tooling: Tall Chimney Later safety valve with Top Feeds Later curved footplate Fluted piston rods Superheated boiler Collett Tender Livery: GWR Lined Green Great Western tender lettering Accurate colours and fonts - OO Scale

Hornby GNR J13 1252 GNR Plain Grey (Sound Fitted)

GNR J13 1252 GNR Plain Grey (Sound Fitted) The Hornby GNR J13/J52 returns for 2026 in the standout GNR grey livery of the early 1900s, numbered 1252. Model Specification: Highly detailed OO gauge model based on extensive research and original works drawings Die-cast boiler, chassis and running plate. Model weight is 235 grams Highly detailed cab and fully decorated backhead with decorated instrument dials Pogo pin wheel pick-up arrangement for easy pick-up servicing Die-cast connecting rods Prototypical size metal handrails with brass stanchions Oilite main drive bearings Opening cab roof vent Sprung metal buffers Front and rear NEM coupling pocket. Rear coupling pocket has a close coupling mechanism Wheel pick-ups on all wheels Accessory bag contains vacuum pipes, lamps and couplings Separately fitted lamps (lamp code can be changed) Separately fitted simulated coal load. DCC Sound: HM7000 21-pin sound decoder fitted High fidelity sound profile of J13/J52 Electronics: Decoder-controlled firebox flicker HM7000 Power Bank compatible Powerful 5-pole skew-wound motor Tooling: Raised Safari cab roof ventilator Double footstep arrangement Coal bunker with coal rails Flush-faced connecting rods Brass Ramsbottom safety valves 3’ 3” built-up chimney GNR tapered buffer stocks Livery: GNR Plain Grey Semi-gloss with matt smokebox Accurate colours and typefaces - OO Scale

Hornby GNR J13 1252 GNR Plain Grey

GNR J13 1252 GNR Plain Grey The Hornby GNR J13/J52 returns for 2026 in the standout GNR grey livery of the early 1900s, numbered 1252. Model Specification: Highly detailed OO gauge model based on extensive research and original works drawings Die-cast boiler, chassis and running plate. Model weight is 235 grams Highly detailed cab and fully decorated backhead with decorated instrument dials Pogo pin wheel pick-up arrangement for easy pick-up servicing Die-cast connecting rods Prototypical size metal handrails with brass stanchions Oilite main drive bearings Opening cab roof vent Sprung metal buffers Front and rear NEM coupling pocket. Rear coupling pocket has a close coupling mechanism Wheel pick-ups on all wheels Accessory bag contains vacuum pipes, lamps and couplings Separately fitted lamps (lamp code can be changed) Separately fitted simulated coal load. Electronics: Decoder-controlled firebox flicker (decoder sold separately) HM7000 21-pin sound decoder compatible HM7000 Power Bank compatible Powerful 5-pole skew-wound motor Tooling: Raised Safari cab roof ventilator Double footstep arrangement Coal bunker with coal rails Flush-faced connecting rods Brass Ramsbottom safety valves 3’ 3” built-up chimney GNR tapered buffer stocks Livery: GNR Plain Grey Semi-gloss with matt smokebox Accurate colours and typefaces - OO Scale

Hornby Dublo: Merchant Navy 35019 'French Line CGT' BR Express Blue

Dublo: Merchant Navy 35019 'French Line CGT' BR Express Blue A further addition to the highly collectable Hornby Dublo range comes in the form of Merchant Navy No. 35019 ‘French Line CGT’, in the vibrant express blue colour scheme of early British Railways. Moulded out of diecast, this high-fidelity model of a classic Bulleid ‘Spam Can’ is the ideal locomotive for collectors of Southern Region stock and Dublo Diecast models. Model Specification: High detail OO gauge model based on extensive research and original works drawings Fully moulded in Diecast Diecast connecting rods and valve gear Accessory ‘RF’ Headboard High detail cab and fully decorated backhead with decorated instrument dials Large number of separately fitted parts Separately fitted simulated coal load with fully detailed tender bunker Powerful 5 pole skew wound motor Electrical pickups on main drive wheels and tender wheels 8-way locomotive to tender drawbar, with integrated electrical connection for easy coupling and decoupling. Pogo pin wheel pickup arrangement for easy pickup servicing Brass main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Accessory bag Minimum 2nd Radius curves Electronics: 21-Pin HM7000 decoder socket compatible with HM7000 system HM7000 Power Bank compatible Livery: BR Lined Express Blue with ‘Cycling Lion’ early emblem on tender French Line CGT etched nameplates Semi-gloss finish Accurate colours and fonts - OO Scale

Hornby A1X 'Terrier' 643 LB&SCR Marsh Brown

A1X 'Terrier' 643 LB&SCR Marsh Brown The famous LB&SCR A1/A1X 0-6-0 Terrier is back for the 2026 range launch, utilising the highly accurate OO Gauge tooling suite that expertly captures the charming characteristics of the southern steam engine. It has been designed for smooth and reliable operation, including the provision for digital command control via a 6-pin decoder socket. This particular example depicts No.643 in London Brighton & South Coast Railway Marsh Brown. Model Specification: Expertly moulded die-cast body and chassis for added realism and weight Number of separately fitted parts, including smokebox door, water filler caps, handrails, lamp irons and buffers Brass connector rods with metal securing pins Detailed cab interior with painted instrument dials Pivoting NEM sockets for improved coupling around tight curves Precision-engineered coreless motor for smooth running All-wheel pick-ups Accessory pack minimum 2nd radius Electronics: 6-Pin DCC Decoder socket compatible with HM7000 system Tooling: Stroudley chimney Flush smokebox door Four lamp brackets on front and rear Low bufferstock with no lamp brackets Steam pipes Small cab bunker with no coal rails Westinghouse pump Livery: LB&SCR Marsh Brown Accurate colours and typefaces - OO Scale

Hornby A1X 'Terrier' 72 'Fenchurch' Newhaven Harbour Company

A1X 'Terrier' 72 'Fenchurch' Newhaven Harbour Company The famous LB&SCR A1/A1X 0-6-0 Terrier is back for the 2026 range launch, utilising the highly accurate OO Gauge tooling suite that expertly captures the charming characteristics of the southern steam engine. It has been designed for smooth and reliable operation, including the provision for digital command control via a 6-pin decoder socket. This particular example depicts No.72 ‘Fenchurch’ in Newhaven Harbour Company lined black. Model Specification: Expertly moulded die-cast body and chassis for added realism and weight Number of separately fitted parts, including smokebox door, water filler caps, handrails, lamp irons and buffers Brass connector rods with metal securing pins Detailed cab interior with painted instrument dials Pivoting NEM sockets for improved coupling around tight curves Precision-engineered coreless motor for smooth running All-wheel pick-ups Accessory pack Minimum 2nd radius Electronics: 6-Pin DCC Decoder socket compatible with HM7000 system Tooling: Stroudley chimney Rivetted smokebox door Six lamp brackets on front and rear  Low bufferstock with lamp brackets Steam pipes removed Small cab bunker with no coal rails Westinghouse pump Livery: Newhaven Harbour Company lined black Accurate colours and typefaces - OO Scale

Rapido UK LNER C12 Tank No.1517N LNER Lined Black

LNER C12 Tank No.1517N LNER Lined Black LNER C12 4-4-2 Tank No.1517n LNER Plain Black Short chimney and dome As-built safety valves Round tank edges Tapered buffers Destination plate hangers on smokebox door And many more variant parts Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker E24 DCC decoder socket MoPower stay-alive capacitors Factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK LNER C12 Tank No.1519 L&NER Lined Black

LNER C12 Tank No.1519 L&NER Lined Black LNER C12 4-4-2 Tank No.1519 LNER Lined Black Short chimney and dome As-built safety valves Round tank edges Tapered buffers Plain smokebox door And many more variant parts Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker E24 DCC decoder socket MoPower stay-alive capacitors Factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK LNER C12 Tank No.4009A LNER Plain Black

LNER C12 Tank No.4009A LNER Plain Black LNER C12 4-4-2 Tank No.4009A LNER Plain Black Tall chimney and dome Ross Pop safety valves Square tank edges Parallel buffers Handrail on smokebox door And many more variant parts Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker E24 DCC decoder socket MoPower stay-alive capacitors Factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK LNER C12 Tank No.4010 NE Wartime Black

LNER C12 Tank No.4010 NE Wartime Black LNER C12 4-4-2 Tank No.4010 LNER Plain Black Tall chimney and dome Ross Pop dafety valves Square tank edges Parallel buffers Plain smokebox door And many more variant parts Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker E24 DCC decoder socket MoPower stay-alive capacitors Factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK LNER C12 Tank No.4502 LNER Lined Black

LNER C12 Tank No.4502 LNER Lined Black LNER C12 4-4-2 Tank No.4502 LNER Lined Black Short chimney and dome Ross Pop safety valves Round tank edges Parallel buffers Plain smokebox door And many more variant parts Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker E24 DCC decoder socket MoPower stay-alive capacitors Factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK LNER C12 Tank No.67352 BR Lined Black (Late)

LNER C12 Tank No.67352 BR Lined Black (Late) LNER C12 4-4-2 Tank No.67352 BR Lined Late Crest Short chimney and dome Ross Pop safety valves Square tank edges Parallel buffers Numberplate on smokebox door And many more variant parts Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker E24 DCC decoder socket MoPower stay-alive capacitors Factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK LNER C12 Tank No.67356 British Railways Black

LNER C12 Tank No.67356 British Railways Black LNER C12 4-4-2 Tank No.67356 British Railways Tall chimney and dome Ross Pop safety valves Square tank edges Parallel buffers Numberplate on smokebox door And many more variant parts Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker E24 DCC decoder socket MoPower stay-alive capacitors Factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK LNER C12 Tank No.67380 BR Lined Black (Early)

LNER C12 Tank No.67380 BR Lined Black (Early) LNER C12 4-4-2 Tank No.67380 BR Lined Early Crest Short chimney and dome Ross Pop safety valves Round tank edges Parallel buffers Numberplate on smokebox door And many more variant parts Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker E24 DCC decoder socket MoPower stay-alive capacitors Factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK LNER C12 Tank No.67391 BR Lined Black (Early)

LNER C12 Tank No.67391 BR Lined Black (Early) LNER C12 4-4-2 Tank No.67391 BR Lined Early Crest Short chimney and dome Ross Pop safety valves Round tank edges Parallel buffers Numberplate on smokebox door And many more variant parts Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker E24 DCC decoder socket MoPower stay-alive capacitors Factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK HR ‘Jones Goods’ HR Yellow No. 103 (1960s condition)

HR ‘Jones Goods’ HR Yellow No. 103 (1960s condition) Highland Railway ‘Jones Goods’ 4-6-0 HR Yellow No. 103 (1960s condition) Short smokebox door straps Smokebox wing plates Louvre chimney Short tender tank with toolbox Original style safety valve 21-pin decoder socket Sprung buffers Museum quality paint finish Factory-fitted sound speaker Smooth & powerful mechanism MoPower Stay Alive included Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK GNR C2 Tank No.1020 GNR Lined Green

GNR C2 Tank No.1020 GNR Lined Green GNR C2 4-4-2 Tank No.1020 GNR Lined Green Tall chimney and dome As-built safety valves Square tank edges Parallel buffers Plain smokebox door And many more variant parts Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker E24 DCC decoder socket MoPower stay-alive capacitors Factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK GNR C2 Tank No.1511 GNR Grey

GNR C2 Tank No.1511 GNR Grey GNR C2 4-4-2 Tank No.1511 GNR Grey Short chimney and dome As-built safety valves Round tank edges Tapered buffers Destination plate hangers on smokebox door Condensing pipes And many more variant parts Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker E24 DCC decoder socket MoPower stay-alive capacitors Factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge

Rapido UK GNR C2 Tank No.1528 GNR Lined Green

GNR C2 Tank No.1528 GNR Lined Green GNR C2 4-4-2 Tank No.1528 GNR Lined Green Short chimney and dome As-built safety valves Round tank edges Parallel buffers Destination plate hangers on smokebox door Condensing pipes And many more variant parts Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker E24 DCC decoder socket MoPower stay-alive capacitors Factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK HR Loch Class No.119 ‘Loch Insh’ HR Drummond Lined Green

HR Loch Class No.119 ‘Loch Insh’ HR Drummond Lined Green Highland Railway ‘Loch’ Class 4-4-0 HR Drummond I Lined Green No. 119 ‘Loch Insh’ Tall louvred HR chimney Long smokebox door straps Smokebox wing plates Jones safety valves Tender toolbox Tender gong Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker 21-pin DCC decoder socket Factory-fitted speakers in all models Sprung buffers Museum-quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale (OO gauge)

Rapido UK HR Loch Class No.120 ‘Loch Ness’ HR Drummond Lined Green

HR Loch Class No.120 ‘Loch Ness’ HR Drummond Lined Green Highland Railway ‘Loch’ Class 4-4-0 HR Drummond I Lined Green No. 120 ‘Loch Ness’ Tall louvred HR chimney Long smokebox door straps Smokebox wing plates Jones safety valves Tender toolbox Tender gong Tablet catcher Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker 21-pin DCC decoder socket Factory-fitted speakers in all models Sprung buffers Museum-quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale (OO gauge)

Rapido UK HR Loch Class No.120 ‘Loch Ness’ HR Drummond Lined Green (SF)

HR Loch Class No.120 ‘Loch Ness’ HR Drummond Lined Green (Sound Fitted) Highland Railway ‘Loch’ Class 4-4-0 HR Drummond I Lined Green No. 120 ‘Loch Ness’ Tall louvred HR chimney Long smokebox door straps Smokebox wing plates Jones safety valves Tender toolbox Tender gong Tablet catcher Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker 21-pin DCC decoder socket Factory-fitted speakers in all models Sprung buffers Museum-quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale (OO gauge)

Rapido UK HR Loch Class No.125 ‘Loch Tay’ HR Jones Lined Green

HR Loch Class No.125 ‘Loch Tay’ HR Jones Lined Green Highland Railway ‘Loch’ Class 4-4-0 HR Jones Lined Green No. 125 ‘Loch Tay’ Tall louvred HR chimney Long smokebox door straps Smokebox wing plates Jones safety valves Tender toolbox Tender gong Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker 21-pin DCC decoder socket Factory-fitted speakers in all models Sprung buffers Museum-quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale (OO gauge)

Rapido UK HR Loch Class No.14383 ‘Loch An Dorb’ LMS Lined Red

HR Loch Class No.14383 ‘Loch An Dorb’ LMS Lined Red Highland Railway ‘Loch’ Class 4-4-0 LMS Lined Red No. 14383 ‘Loch an Dorb’ Tall louvred HR chimney Caledonian style smokebox door Smokebox wing plates Jones safety valves Tablet catcher Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker 21-pin DCC decoder socket Factory-fitted speakers in all models Sprung buffers Museum-quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale (OO gauge)

Rapido UK HR Loch Class No.14384 ‘Loch Laggan’ LMS Lined Black

HR Loch Class No.14384 ‘Loch Laggan’ LMS Lined Black Highland Railway ‘Loch’ Class 4-4-0 LMS Lined Black No. 14384 ‘Loch Laggan’ Short louvred HR chimney Short smokebox door straps Smokebox without wing plates Ross pop safety valves Tablet catcher Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker 21-pin DCC decoder socket Factory-fitted speakers in all models Sprung buffers Museum-quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale (OO gauge)

Rapido UK HR Loch Class No.14384 ‘Loch Laggan’ LMS Lined Black (SF)

HR Loch Class No.14384 ‘Loch Laggan’ LMS Lined Black (Sound Fitted) Highland Railway ‘Loch’ Class 4-4-0 LMS Lined Black No. 14384 ‘Loch Laggan’ Short louvred HR chimney Short smokebox door straps Smokebox without wing plates Ross pop safety valves Tablet catcher Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker 21-pin DCC decoder socket Factory-fitted speakers in all models Sprung buffers Museum-quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale (OO gauge)

Rapido UK HR Loch Class No.150 ‘Loch Eye’ ‘What If’ HR Lined Yellow

HR Loch Class No.150 ‘Loch Eye’ ‘What If’ HR Lined Yellow Highland Railway ‘Loch’ Class 4-4-0 ‘What If’ HR Lined Yellow No. 150 ‘Loch Eye’ Tall louvred HR chimney Long smokebox door straps Smokebox wing plates Jones safety valves Tender toolbox Tender gong Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker 21-pin DCC decoder socket Factory-fitted speakers in all models Sprung buffers Museum-quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale (OO gauge)

Rapido UK MR 483 No.40557 BR Black (Late)

MR 483 No.40557 BR Black (Late) No. 40557 BR late crest unlined black Stanier short chimney Short dome Ross Pop safety valves LMS modified body style Exhaust injector Circular valve seat Rivetted smokebox LMS simplified bogie Round tender water dome 21-pin decoder socket Sprung buffers NEM coupling pockets Factory fitted speaker Smooth & powerful mechanism Lots of separately fitted parts - OO Scale

Rapido UK MR 483 No.483 Midland Railway Crimson (Sound Fitted)

MR 483 No.483 Midland Railway Crimson (Sound Fitted) No. 483 Midland Railway crimson Capuchon chimney Tall dome Ramsbottom safety valves As rebuilt body style Oval valve seat Flush smokebox Superheater damper fitted As rebuilt bogie Square tender water dome 21-pin decoder socket Sprung buffers NEM coupling pockets Factory fitted speaker Smooth & powerful mechanism Lots of separately fitted parts - OO Scale

Rapido UK MR 483 No.502 Midland Railway Royal Train

MR 483 No.502 Midland Railway Royal Train No. 502 Midland Railway Royal Train livery Capuchon chimney Tall dome Ramsbottom safety valves As rebuilt body style Oval valve seat Flush smokebox Superheater damper fitted As rebuilt bogie Square tender water dome 21-pin decoder socket Sprung buffers NEM coupling pockets Factory fitted speaker Smooth & powerful mechanism Lots of separately fitted parts - OO Scale

Rapido UK MR 483 No.70 SDJR Blue

MR 483 No.70 SDJR Blue No. 518 S&DJR prussian blue Capuchon Chimney Tall dome Ramsbottom safety valves As rebuilt body style Oval valve seat Rivetted smokebox As rebuilt bogie S&DJR style tender Tablet catcher fitted 21-pin decoder socket Sprung buffers NEM coupling pockets Factory fitted speaker Smooth & powerful mechanism Lots of separately fitted parts - OO Scale

Rapido UK MR 483 No.40419 BRITISH RAILWAYS Lined Black

MR 483 No.40419 BRITISH RAILWAYS Lined Black No. 40419 BRITISH RAILWAYS lined black Stanier short chimney Short dome Ross Pop safety valves LMS modified body style Exhaust injector Circular valve seat Rivetted dmokebox LMS simplified bogie Round tender water dome 21-pin decoder socket Sprung buffers NEM coupling pockets Factory fitted speaker Smooth & powerful mechanism Lots of separately fitted parts - OO Scale

Rapido UK MR 483 No.40419 BRITISH RAILWAYS Lined Black (Sound Fitted)

MR 483 No.40419 BRITISH RAILWAYS Lined Black (Sound Fitted) No. 40419 BRITISH RAILWAYS lined black Stanier short chimney Short dome Ross Pop safety valves LMS modified body style Exhaust injector Circular valve seat Rivetted dmokebox LMS simplified bogie Round tender water dome 21-pin decoder socket Sprung buffers NEM coupling pockets Factory fitted speaker Smooth & powerful mechanism Lots of separately fitted parts - OO Scale

Rapido UK MR 483 No.40527 BR Black (Early)

MR 483 No.40527 BR Black (Early) No. 40527 BR early crest plain black Stanier short chimney Short dome Ross Pop safety valves LMS modified body style Exhaust injector Circular valve seat Rivetted smokebox LMS simplified bogie Round tender water dome 21-pin decoder socket Sprung buffers NEM coupling pockets Factory fitted speaker Smooth & powerful mechanism Lots of separately fitted parts - OO Scale  

Rapido UK GWR County No.1019 'County of Merioneth' BR Lined Black (Early)

GWR County No.1019 'County of Merioneth' BR Lined Black (Early) GWR Class 1000 ‘County’ 1019 “County of Merioneth” in BR Lined Black (Early Crest) Red backed number & name plates Single Chimney Speedo Fitted Parallel Buffers Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK GWR County No.1017 'County of Hereford' BR Lined Green(Egyptian)

GWR County No.1017 'County of Hereford' BR Lined Green (Egyptian) GWR Class 1000 ‘County’ 1017 “County of Hereford” in BR (Egyptian) Lined Green Single Chimney Parallel Buffers Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK GWR County No.1000 'County of Middlesex' BR Lined Green (Late)

GWR County No.1000 'County of Middlesex' BR Lined Green (Late) GWR Class 1000 ‘County’ 1000 “County of Middlesex” in BR Lined Green (Late Crest) Double Chimney Speedo Fitted Parallel Buffers Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK GWR County No.1001 G.W. Lined Green

GWR County No.1001 G.W. Lined Green GWR Class 1000 ‘County’ 1001 in GW Lined Green Single Chimney Parallel Buffers Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK GWR County No.1001 G.W. Lined Green (SF)

GWR County No.1001 G.W. Lined Green (Sound Fitted) GWR Class 1000 ‘County’ 1001 in GW Lined Green Single Chimney Parallel Buffers Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK GWR County No.1005 'County of Devon' G.W. Lined Green

GWR County No.1005 'County of Devon' G.W. Lined Green GWR Class 1000 ‘County’ 1005 “County of Devon” in GW Lined Green Single Chimney Parallel Buffers Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK GWR County No.1006 'County of Cornwall' BR Lined Green (Early)

GWR County No.1006 'County of Cornwall' BR Lined Green (Early) GWR Class 1000 ‘County’ 1006 “County of Cornwall” in BR Lined Green (Early Crest) Single Chimney Speedo Fitted Parallel Buffers Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK GWR County No.1011 'County of Chester' BR Lined Green (Late)

GWR County No.1011 'County of Chester' BR Lined Green (Late) GWR Class 1000 ‘County’ 1011 “County of Chester” in BR Lined Green (Late Crest) GWR number on front bufferbeam, smokebox door plates removed Double Chimney Speedo Fitted Parallel Buffers Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK GWR County No.1011 'County of Chester' BR Lined Green (Late)(SF)

GWR County No.1011 'County of Chester' BR Lined Green (Late) (Sound Fitted) GWR Class 1000 ‘County’ 1011 “County of Chester” in BR Lined Green (Late Crest) GWR number on front bufferbeam, smokebox door plates removed Double Chimney Speedo Fitted Parallel Buffers Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK GWR County No.1013 'County of Dorset' BR Lined Black (Early)

GWR County No.1013 'County of Dorset' BR Lined Black (Early) GWR Class 1000 ‘County’ 1013 “County of Dorset” in BR Lined Black (Early Crest) Black backed number & name plates Single Chimney Speedo Fitted Parallel Buffers Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK GWR County No.1013 'County of Dorset' BR Lined Black (Early)(SF)

GWR County No.1013 'County of Dorset' BR Lined Black (Early) (Sound Fitted) GWR Class 1000 ‘County’ 1013 “County of Dorset” in BR Lined Black (Early Crest) Black backed number & name plates Single Chimney Speedo Fitted Parallel Buffers Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK GWR County No.1017 'County of Hereford' BR Lined Green (SF)

GWR County No.1017 'County of Hereford' BR Lined Green (Egyptian) (Sound Fitted) GWR Class 1000 ‘County’ 1017 “County of Hereford” in BR (Egyptian) Lined Green Single Chimney Parallel Buffers Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Bachmann LMS Ivatt 2MT 46464 BR Lined Black (Early) (Preserved)

LMS Ivatt 2MT 46464 BR Lined Black (Early) (Preserved)  Ivatt’s 2MT ‘Mogul’ 2-6-0 Tender Locomotives were popular, go-anywhere engines which served the LMS and BR for two decades and across a wide area, making this Bachmann Branchline model a great choice for many modellers wishing to depict the steam age or preservation, as the type remains strongly represented today. The Branchline model of Ivatt’s 2-6-0 mogul employs a diecast running plate and locomotive chassis to provide an impressive weight, ensuring that the model’s performance matches that of the prototype. Meanwhile, those components produced in plastic are precision moulded, with details such as rivets and boiler bands crisply reproduced. Separate parts are then added to enhance the authenticity of the model further, from the metal handrails and lamp irons to the safety valves, whistle and sprung buffers, each of which are turned brass. Further details are added individually like the lubricators and sand boxes adorning the running plate and the brake blocks, brake rigging and metal wire sandpipes mounted to the chassis. Within the cab, controls, dials and pipework are all moulded authentically and decorated accordingly. Moving to the tender and two lengths of locomotive to tender drawbar are provided to suit different layout conditions whilst the tender itself is finely moulded, with several separately applied details including the lamp irons, handrails, handwheels and sprung metal buffers. A realistic coal load is included, with the empty coal space modelled below, whilst the tender chassis includes brake rigging and the water scoop. The livery application is executed to the highest standard with the rich, uniform paintwork enhanced by the three-colour lining, emulating the BR lined black livery to full effect. Numbering, lettering and the BR Early Emblem is reproduced in high definition, resulting in a model fit for any collection. MODEL FEATURES: Bachmann Branchline OO Scale Era 4 Locomotive is Preserved Pristine BR Lined Black (Early Emblem) livery Running No. 46464 Long Tender Ladder and Fabricated Cab Footsteps Two lengths of Tender Drawbar Supplied Powerful 3 Pole Motor NEM Coupling Pockets Sprung Buffers Accessory Pack Equipped with a 8 Pin DCC Decoder Socket – Recommend Decoder item No. 36-566A Length 226mm (over couplings) IVATT 2MT HISTORY Designed by H. G. Ivatt for the London, Midland & Scottish Railway (LMS), 128 of these Class 2 Moguls were built for light freight and passenger duties. With construction commencing in 1946, just twenty examples were built by the LMS and the remaining 108 were outshopped by British Railways following Nationalisation in 1948. The construction programme was completed in 1952 and these Mixed Traffic locomotives would go on to operate on all the BR regions, with the exception of the Southern. Light axle loadings allowed the Ivatt 2MTs to be used on most routes including branch lines, where their almost enclosed cabs made them ideal for working tender first when no turning facilities existed. The design provided the basis for the BR Standard Class 2MT 2-6-0, and the two are very similar in appearance, with the Standard version having only a modified cab and tender profile to allow unrestricted route availability across the British network. With BR progressively closing more and more branch lines, and rationalising others – often employing new diesel multiple units to provide a more economical passenger service – duties for small locomotives like the Ivatt 2MTs began to disappear and the decline of the class began in 1961 when the first example was withdrawn. The Mogul’s versatility and its relatively modern design however ensured that many examples were still in traffic until the mid-1960s, but by 1967 all had been withdrawn. Thankfully, seven Ivatt 2MT have been preserved and the type is an ideal source of motive power for many of the trains running on heritage railways today.

Bachmann LMS Ivatt 2MT 46521 BR Lined Green (Early) (Preserved)

LMS Ivatt 2MT 46521 BR Lined Green (Early) (Preserved) Ivatt’s 2MT ‘Mogul’ 2-6-0 Tender Locomotives were popular, go-anywhere engines which served the LMS and BR for two decades and across a wide area, making this Bachmann Branchline model a great choice for many modellers wishing to depict the steam age or preservation, as the type remains strongly represented today. The Branchline model of Ivatt’s 2-6-0 mogul employs a diecast running plate and locomotive chassis to provide an impressive weight, ensuring that the model’s performance matches that of the prototype. Meanwhile, those components produced in plastic are precision moulded, with details such as rivets and boiler bands crisply reproduced. Separate parts are then added to enhance the authenticity of the model further, from the metal handrails and lamp irons to the safety valves, whistle and sprung buffers, each of which are turned brass. Further details are added individually like the lubricators and sand boxes adorning the running plate and the brake blocks, brake rigging and metal wire sandpipes mounted to the chassis. Within the cab, controls, dials and pipework are all moulded authentically and decorated accordingly. Moving to the tender and two lengths of locomotive to tender drawbar are provided to suit different layout conditions whilst the tender itself is finely moulded, with several separately applied details including the lamp irons, handrails, handwheels and sprung metal buffers. A realistic coal load is included, with the empty coal space modelled below, whilst the tender chassis includes brake rigging and the water scoop. The livery application is executed to the highest standard with the rich, uniform paintwork enhanced by the black and orange lining, emulating the BR lined green livery to full effect. Numbering, lettering and the BR Early Emblem is reproduced in high definition, resulting in a model fit for any collection.   MODEL FEATURES: Bachmann Branchline OO Scale Era 4 Locomotive is Preserved Pristine BR Lined Green (Early Emblem) livery Running No. 46521 Short Tender Ladder and Oval Cab Footsteps Two lengths of Tender Drawbar Supplied Powerful 3 Pole Motor NEM Coupling Pockets Sprung Buffers Accessory Pack Equipped with a 8 Pin DCC Decoder Socket – Recommend Decoder item No. 36-566A Length 226mm (over couplings) IVATT 2MT HISTORY Designed by H. G. Ivatt for the London, Midland & Scottish Railway (LMS), 128 of these Class 2 Moguls were built for light freight and passenger duties. With construction commencing in 1946, just twenty examples were built by the LMS and the remaining 108 were outshopped by British Railways following Nationalisation in 1948. The construction programme was completed in 1952 and these Mixed Traffic locomotives would go on to operate on all the BR regions, with the exception of the Southern. Light axle loadings allowed the Ivatt 2MTs to be used on most routes including branch lines, where their almost enclosed cabs made them ideal for working tender first when no turning facilities existed. The design provided the basis for the BR Standard Class 2MT 2-6-0, and the two are very similar in appearance, with the Standard version having only a modified cab and tender profile to allow unrestricted route availability across the British network. With BR progressively closing more and more branch lines, and rationalising others – often employing new diesel multiple units to provide a more economical passenger service – duties for small locomotives like the Ivatt 2MTs began to disappear and the decline of the class began in 1961 when the first example was withdrawn. The Mogul’s versatility and its relatively modern design however ensured that many examples were still in traffic until the mid-1960s, but by 1967 all had been withdrawn. Thankfully, seven Ivatt 2MT have been preserved and the type is an ideal source of motive power for many of the trains running on heritage railways today.

Bachmann LMS Ivatt 2MT 46447 BR Lined Black (Late) (Preserved)

LMS Ivatt 2MT 46447 BR Lined Black (Late) (Preserved) LMS Ivatt 2MT 46447 BIvatt’s 2MT ‘Mogul’ 2-6-0 Tender Locomotives were popular, go-anywhere engines which served the LMS and BR for two decades and across a wide area, making this Bachmann Branchline model a great choice for many modellers wishing to depict the steam age or preservation, as the type remains strongly represented today. The Branchline model of Ivatt’s 2-6-0 mogul employs a diecast running plate and locomotive chassis to provide an impressive weight, ensuring that the model’s performance matches that of the prototype. Meanwhile, those components produced in plastic are precision moulded, with details such as rivets and boiler bands crisply reproduced. Separate parts are then added to enhance the authenticity of the model further, from the metal handrails and lamp irons to the safety valves, whistle and sprung buffers, each of which are turned brass. Further details are added individually like the lubricators and sand boxes adorning the running plate and the brake blocks, brake rigging and metal wire sandpipes mounted to the chassis. Within the cab, controls, dials and pipework are all moulded authentically and decorated accordingly. Moving to the tender and two lengths of locomotive to tender drawbar are provided to suit different layout conditions whilst the tender itself is finely moulded, with several separately applied details including the lamp irons, handrails, handwheels and sprung metal buffers. A realistic coal load is included, with the empty coal space modelled below, whilst the tender chassis includes brake rigging and the water scoop. The livery application is executed to the highest standard with the rich, uniform paintwork enhanced by the three-colour lining, emulating the BR lined black livery to full effect. Numbering, lettering and the BR Late Crest is reproduced in high definition, resulting in a model fit for any collection.   MODEL FEATURES: Bachmann Branchline OO Scale Era 5 Locomotive is Preserved Pristine BR Lined Black (Late Crest) livery Running No. 46447 Long Tender Ladder and Oval Cab Footsteps Two lengths of Tender Drawbar Supplied Powerful 3 Pole Motor NEM Coupling Pockets Sprung Buffers Accessory Pack Equipped with a 8 Pin DCC Decoder Socket – Recommend Decoder item No. 36-566A Length 226mm (over couplings)     IVATT 2MT HISTORY   Designed by H. G. Ivatt for the London, Midland & Scottish Railway (LMS), 128 of these Class 2 Moguls were built for light freight and passenger duties. With construction commencing in 1946, just twenty examples were built by the LMS and the remaining 108 were outshopped by British Railways following Nationalisation in 1948. The construction programme was completed in 1952 and these Mixed Traffic locomotives would go on to operate on all the BR regions, with the exception of the Southern. Light axle loadings allowed the Ivatt 2MTs to be used on most routes including branch lines, where their almost enclosed cabs made them ideal for working tender first when no turning facilities existed. The design provided the basis for the BR Standard Class 2MT 2-6-0, and the two are very similar in appearance, with the Standard version having only a modified cab and tender profile to allow unrestricted route availability across the British network.   With BR progressively closing more and more branch lines, and rationalising others – often employing new diesel multiple units to provide a more economical passenger service – duties for small locomotives like the Ivatt 2MTs began to disappear and the decline of the class began in 1961 when the first example was withdrawn. The Mogul’s versatility and its relatively modern design however ensured that many examples were still in traffic until the mid-1960s, but by 1967 all had been withdrawn. Thankfully, seven Ivatt 2MT have been preserved and the type is an ideal source of motive power for many of the trains running on heritage railways today. BR Lined Black (Late) (Preserved)

Bachmann MR 3835 (4F) w/ Johnson-Deeley Tender 3850 LMS Black

MR 3835 (4F) w/ Johnson-Deeley Tender 3850 LMS Black The 4Fs were simple yet beautiful machines and the Branchline model pays homage to that with high fidelity mouldings for the main components like the smokebox, boiler, firebox and cab, which are all mounted on a diecast metal running plate. Countless separate detailing parts are then added like the metal handrails, turned brass safety valves, lamp irons and lubricators. Sprung metal buffers are fitted to both bufferbeams. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. This attention to detail extends to the tender, while the tender drawbar is adjustable to suit individual layout conditions and electrical connections are incorporated into the drawbar. Look inside the cab and you will find a sublime level of detail; the boiler backhead boasts an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. A poseable fallplate is fitted to the rear of the cab to complete the look. The Branchline 4F runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine LMS Black livery Running No. 3850 Johnson-Deeley Tender Tall Chimney with Capuchon Ramsbottom Safety Valves Fluted Connecting Rods Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 221mm (over couplings) OO Scale 

Hornby BR Class 50 D403 BR Blue (TT)

BR Class 50 D403 BR Blue  The latest 'Hoover' to the TT:120 range is the BR Class D403. Featuring a five-pole motor, directional and cab lighting, die-cast chassis and highly detailed bodyshell, the illustrious Class 50 will make an mpressive addition to your TT:120 fleet. This model depicts pre-TOPS numbered D403 in all-over BR Blue with small cab side BR Double Arrows and headcode panels. Model Specification: Highly detailed model based on extensive research including 3D scanning and original works drawings Heavy die-cast chassis and underframe, giving an overall weight of 195g Powerful five-pole skew-wound motor with dual flywheels Dual bogie drive with a total of 12 driving wheels Brass axle bearings All wheel electrical pickup Front and rear kinematic NEM coupling system Die-cast metal buffers Separately fitted metal steps, grills and handrails Accessory bag contains optional fit snow ploughs, vacuum pipes and couplings Electronics: Directional lighting Cab interior lighting (requires DCC to operate) Separately controllable taillights (requires DCC to operate) Next-18 Decoder socket compatible with HM7000 system Space for HM7000-N18TXS Sound Decoder to be fitted Space for HM7070 Power Bank for uninterrupted running Tooling: Original headcode box Original boiler port Flush nose ends Livery: BR Blue with cab side double arrows Pre-Tops number Unnamed - TT:120 Scale

Hornby BR Class 50 50026 'Indomitable' BR Large Logo (TT)

BR Class 50 50026 'Indomitable' BR Large Logo Here comes another 'Hoover'! BR Class 50 50026 'Indomitable' features a five-pole motor, directional and cab lighting, die-cast chassis and highly detailed bodyshell, making an imposing addition to your TT:120 fleet. This illustrious model depicts TOPS numbered 50026 ‘Indomitable’ in BR Blue with large double arrow logos, plated headcode panels and high intensity light. Model Specification: Highly detailed model based on extensive research including 3D scanning and original works drawings Heavy die-cast chassis and underframe, giving an overall weight of 195g Powerful five-pole skew-wound motor with dual flywheels Dual bogie drive with a total of 12 driving wheels Brass axle bearings All wheel electrical pickup Front and rear kinematic NEM coupling system Die-cast metal buffers Separately fitted metal steps, grills and handrails Accessory bag contains optional fit snow ploughs, vacuum pipes and couplings Electronics: Directional lighting Cab interior lighting (requires DCC to operate) Separately controllable taillights (requires DCC to operate) Next-18 Decoder socket compatible with HM7000 system Space for HM7000-N18TXS Sound Decoder to be fitted Space for HM7070 Power Bank for uninterrupted running Tooling: Plated headcode box with marker lights fitted Plated boiler port High intensity light fitted in nose ends Livery: BR Blue with large double arrows Grey roof Indomitable name plates - TT:120 Scale

Hornby BR Class 37 37413 'Loch Eil Outward Bound' Transrail (TT)

BR Class 37 37413 'Loch Eil Outward Bound' Transrail Introducing Transrail Class 37 'Loch Eil Outward Bound' 37413, including all the same great features presented on the English Electric Class 37 model releases late last year, such as working lights, weighty die-cast chassis, and optional bodyshells depending on subclass. The ‘Tractor’ is a must have for any TT:120 layout, with this model representing No.37413 ‘Loch Eil Outward Bound’ in Transrail Triple Grey Livery, complete with Transrail company logos. Model Specification: Highly detailed model based on extensive research and design, including historical drawings and laser scans Die-cast chassis and underframe giving the mode a weight of 170g Assortment of separately fitted parts, including lamp brackets, speedometer, sandpipes, and roof horns Etched metal roof grille Detailed cab interior Powerful five-pole motor with dual flywheels providing power to all wheels Electrical pick-ups on all wheels Brass axle bearings Pivoting NEM coupling sockets Accessory pack that includes body removal tool, optional snowplough and bufferbeam pipes Minimum 2nd radius curves Electronics: Working directional and cab lights, including Day/Night mode (please note some functionality will only work on DCC) Next18 DCC Decoder socket compatible with HM7000 system Decoder socket housed underneath clip-on body Space for HM7000-N18TXS Sound Decoder to be fitted Space for HM7070 Power Bank for uninterrupted running Tooling: Class 37/4 Plated headcodes High intensity lights Nose-mounted ETH Oval buffers Plated roof boiler plate Livery: Transrail Triple Grey Livery Named ‘Loch Eil Outward Bound’ St Blazey Lizard Depot plaques Semi-gloss finish Faithfully created using accurate colours and fonts - TT:120 Scale

Hornby BR Class 43 HST 43136 & 43189 FGW Gold Stripe (TT)

BR Class 43 HST 43136 & 43189 FGW Gold Stripe  The Class 43 HST Power Cars and Mk3 trailing coaches have been a mainstay of the Hornby OO and TT:120 ranges for many years and we are delighted to announce a further example in TT:120, depicting 43136 and 43189 ‘Railway Heritage Trust’ in First Great Western Green, Gold and White livery. Featuring working directional and cab lights, a coreless motor, die-cast chassis and numerous separately fitted parts, the TT:120 Class 43 HST makes an excellent addition to your collection. Model Specification: Twin pack of highly detailed models extensive research and design Motorised Power Car and Unmotorised Dummy Car Die-cast chassis Separately fitted parts including cab and guard door handrails, ETH sockets, underframe equipment Brass exhaust cover Detailed cab interior Coreless motor in motorised car capable of pulling full-length HST rakes Electrical pick-ups on both motorised/unmotorised bogies Pivoting NEM coupling sockets Accessory pack Minimum 2nd radius curves Electronics: Working directional and cab lights Next18 DCC Decoder socket in motorised/unmotorised cars compatible with HM7000 system Decoder socket housed underneath clip-on body for easy access. No screwdriver required Space for HM7000-N18TXS Sound Decoder to be fitted Space for HM7070 Power Bank for uninterrupted running Tooling: Single roof fan Long exhaust shroud Early style of marker lights Livery: First Great Western Green, Gold and White, commonly referred to as ‘Fag Packet’ livery Semi-gloss finish Faithfully created using accurate colours and fonts - TT:120 Scale

Hornby BR Class 08 08499 EWS (TT)

BR Class 08 08499 EWS  Hornby are pleased to present a further two new colourful identities of the ever-popular BR Class 08 shunting diesel engine in the April Range Launch. Featuring a diecast chassis, coreless motor, all-wheel drive, immaculate paint application and much more, this ubiquitous shunting loco is undoubtedly going to stand out on your TT:120 layout. This example depicts No.08499 in early 2000’s corporate EWS Maroon & Gold livery, whilst allocated to depots in the South-West of England. Model Specification: Highly detailed model based on extensive research and design Diecast chassis Assortment of separately fitted parts, including body grabrails, cab steps, sandpipe fillers and buffer stocks Brass coupling rods Detailed cab interior Powerful coreless motor providing power to all wheels Electrical pick-ups on all wheels Pivoting NEM coupling sockets Accessory pack that includes bufferbeam pipes Minimum 2nd radius curves Electronics: 6-Pin DCC Decoder Socket compatible with HM7000 system Livery: EWS Maroon & Gold Yellow Coupling Rods Semi-gloss finish Faithfully created using accurate colours and fonts - TT:120 Scale

Hornby BR Class 08 08593/D3760 'Colchester TMD' Retro Lined Purple (TT)

BR Class 08 08593/D3760 'Colchester TMD' Retro Lined Purple Adding to the ever-popular BR Class 08 diesel range, is Colchester TMD D3760. Featuring a die-cast chassis, coreless motor, all-wheel drive, and immaculate paint application, this ubiquitous shunting locomotive will stand out on your TT:120 layout. This example depicts No.08593/D3760 in retro BR Lined Purple livery, complete with ‘Cycling Lion’ Early Emblem and named ‘Colchester TMD’ as per 1990’s condition when based at either Colchester or Ipswich. Model Specification: Highly detailed model based on extensive research and design Die-cast chassis Assortment of separately fitted parts, including body grabrails, cab steps, sandpipe fillers and buffer stocks Brass coupling rods Detailed cab interior Powerful coreless motor providing power to all wheels Electrical pick-ups on all wheels Pivoting NEM coupling sockets Accessory pack that includes bufferbeam pipes Minimum 2nd radius curves Electronics: 6-Pin DCC Decoder Socket compatible with HM7000 system Livery: Retro BR Lined Purple, complete with early emblems Crisply applied Red lining White roof Wasp stripes Semi-gloss finish Faithfully created using accurate colours and fonts - TT:120 Scale

Hornby BR Class 30 D5502 BR Green (TT)

BR Class 30 D5502 BR Green w/ Duck Egg Lining Hornby are delighted to present the newest addition to the TT:120 diesel locomotive family: the Brush Type 2 Class 30 and 31. This brand-new, highly detailed tooling covers the extensive history of the ‘Gargoyles’: from skinhead examples from the late 50s, to modern Class 31s retrofitted with high intensity lights and NRN roof pods. This exciting new range of Type 2s will be available in either DCC Ready or Sound Fitted format. TT3071M depicts Class 30 D5502 in BR Green with duck egg blue stripes. Model Specification: Highly detailed model based on extensive research and design Die-cast chassis Wealth of separately fitted parts, including front end handrails, disc headcodes (where applicable) and roof grille Detailed cab interior Powerful five-pole motor providing power to all wheels Electrical pick-ups on all wheels Pivoting NEM coupling sockets Accessory pack that includes optional buffer beam pipes Minimum 2nd radius curves Electronics: Next18 DCC Decoder socket compatible with HM7000 system Decoder socket housed underneath clip-fit body for easy access Space for HM7070 Power Bank for uninterrupted running Tooling: Indicator headcode discs ‘Skinhead’ roof Toffee Apple cab style Mirrlees exhaust Side steps Oil filler Water filler Open boiler port Without door louvres Livery: BR Green with duck egg stripes Later British Railways crests Authentic livery colours and font types Semi-gloss finish - TT:120 Scale

Hornby BR Class 31 31219 BR Civil Engineers "Dutch" (TT)

BR Class 31 31219 BR Civil Engineers "Dutch" Hornby are delighted to present the newest addition to the TT:120 diesel locomotive family: the Brush Type 2 Class 30 and 31. This brand-new, highly detailed tooling covers the extensive history of the ‘Gargoyles’: from skinhead examples from the late 50s, to modern Class 31s retrofitted with high intensity lights and NRN roof pods. This exciting new range of Type 2s will be available in either DCC Ready or Sound Fitted format. TT3074M depicts Class 31219 in BR Civil Engineers ‘Dutch’ Grey & Yellow. Model Specification: Highly detailed model based on extensive research and design Die-cast chassis Wealth of separately fitted parts, including front end handrails, disc headcodes (where applicable) and roof grille Detailed cab interior Powerful five-pole motor providing power to all wheels Electrical pick-ups on all wheels Pivoting NEM coupling sockets Accessory pack that includes optional bufferbeam pipes Minimum 2nd radius curves Electronics: Next18 DCC Decoder socket compatible with HM7000 system Decoder socket housed underneath clip-fit body for easy access Space for HM7070 Power Bank for uninterrupted running Tooling: Plated headcode roof High intensity light NRN roof pods Later cab style English Electric exhaust Plated side steps Plated oil filler Plated water filler Plated boiler port Plated front door With door louvres Livery: BR Civil Engineers ‘Dutch’ Grey and Yellow Silver BR double arrows Blue Stratford Sparrow depot plaques Full yellow ends Authentic livery colours and font types Semi-gloss finish - TT:120 Scale

Hornby BR Class 31 31237 BR Railfreight Red Stripe (TT)

BR Class 31 31237 BR Railfreight Red Stripe Hornby are delighted to present the newest addition to the TT:120 diesel locomotive family: the Brush Type 2 Class 30 and 31. This brand-new, highly detailed tooling covers the extensive history of the ‘Gargoyles’: from skinhead examples from the late 50s, to modern Class 31s retrofitted with high intensity lights and NRN roof pods. This exciting new range of Type 2s will be available in either DCC Ready or Sound Fitted format. TT3073M depicts Class 31237 in BR Railfreight Grey with solebar red stripe. Model Specification: Highly detailed model based on extensive research and design Die-cast chassis Wealth of separately fitted parts, including front end handrails, disc headcodes (where applicable) and roof grille Detailed cab interior Powerful five-pole motor providing power to all wheels Electrical pick-ups on all wheels Pivoting NEM coupling sockets Accessory pack that includes optional bufferbeam pipes Minimum 2nd radius curves Electronics: Next18 DCC Decoder socket compatible with HM7000 system Decoder socket housed underneath clip-fit body for easy access Space for HM7070 Power Bank for uninterrupted running Tooling: Plated headcode roof Later cab style English Electric exhaust Plated side steps Plated oil filler Plated water filler Plated boiler port Plated front door With door louvres Livery: BR Railfreight grey Solebar red stripe Full yellow ends Large bodyside double arrows Authentic livery colours and font types Semi-gloss finish - TT:120 Scale

Hornby BR Class 31 31270 BR Blue (Sound Fitted) (TT)

BR Class 31 31270 BR Blue (Sound Fitted) Hornby are delighted to present the newest addition to the TT:120 diesel locomotive family: the Brush Type 2 Class 30 and 31. This brand-new, highly detailed tooling covers the extensive history of the ‘Gargoyles’: from skinhead examples from the late 50s, to modern Class 31s retrofitted with high intensity lights and NRN roof pods. This exciting new range of Type 2s will be available in either DCC Ready or Sound Fitted format. TT3072TXSM is DCC Sound Fitted depicts Class 31270 in BR Blue. Model Specification: Highly detailed model based on extensive research and design Die-cast chassis Wealth of separately fitted parts, including front end handrails, disc headcodes (where applicable) and roof grille Detailed cab interior Powerful five-pole motor providing power to all wheels Electrical pick-ups on all wheels Pivoting NEM coupling sockets Accessory pack that includes optional bufferbeam pipes Minimum 2nd radius curves Electronics: Next18 DCC Decoder socket compatible with HM7000 system Decoder socket housed underneath clip-fit body for easy access Space for HM7070 Power Bank for uninterrupted running Sound: Utilises high-fidelity HM7000 sound file Chassis-mounted speaker Tooling: Glazed headcode roof Later cab style English Electric exhaust Plated side steps Oil filler Plated water filler Plated boiler port Plated front door With door louvres Livery: BR Blue Full yellow ends Small bodyside double arrows Authentic livery colours and font types Semi-gloss finish - TT:120 Scale

Hornby BR Class 31 31270 BR Blue (TT)

BR Class 31 31270 BR Blue Hornby are delighted to present the newest addition to the TT:120 diesel locomotive family: the Brush Type 2 Class 30 and 31. This brand-new, highly detailed tooling covers the extensive history of the ‘Gargoyles’: from skinhead examples from the late 50s, to modern Class 31s retrofitted with high intensity lights and NRN roof pods. This exciting new range of Type 2s will be available in either DCC Ready or Sound Fitted format. TT3072M depicts Class 31270 in BR Blue. Model Specification: Highly detailed model based on extensive research and design Die-cast chassis Wealth of separately fitted parts, including front end handrails, disc headcodes (where applicable) and roof grille Detailed cab interior Powerful five-pole motor providing power to all wheels Electrical pick-ups on all wheels Pivoting NEM coupling sockets Accessory pack that includes optional bufferbeam pipes Minimum 2nd radius curves Electronics: Next18 DCC Decoder socket compatible with HM7000 system. Decoder socket housed underneath clip-fit body for easy access. Space for HM7070 Power Bank for uninterrupted running Tooling: Glazed headcode roof Later cab style English Electric exhaust Plated side steps Oil filler Plated water filler Plated boiler port Plated front door With door louvres Livery: BR Blue Full yellow ends Small bodyside double arrows Authentic livery colours and font types Semi-gloss finish - TT:120 Scale

Hornby Stanier 5MT 'Black 5' 45315 BR Lined Black (Early) (SF) (TT)

Stanier 5MT 'Black 5' 45315 BR Lined Black (Early) (Sound Fitted) The Stanier 5MT 'Black 5' is the latest addition to the TT:120 steam locomotive family., featuring the expertly researched and highly accurate CAD from its OO gauge cousin. This DCC sound-fitted version if the LMS mixed-traffic workhorse is sure to make an impression on any TT:120 layout. This BR Stanier 5MT model depicts No.45315 in British Railways Lined Black livery, with early ‘Cycling Lion’ emblem on the tender. Model Specification: Highly detailed model based on extensive research and design from the critically acclaimed OO gauge version Die-cast boiler and running plate Wealth of separately fitted parts, including boiler handrails, steam pipes, whistles, steps, and sanding pipes. Detailed cab interior Powerful coreless motor providing power to locomotive driving wheels Electrical pick-ups on driving wheels and tender wheels Brass connector rods and slide bars Pivoting NEM coupling sockets Accessory pack that includes optional snowplough and decorative coupling hook Minimum 2nd radius curves Electronics: Next18 DCC sound decoder fitted is compatible with HM7000 system Space for HM7070 Power Bank for uninterrupted running Sound: Utilises same high-fidelity HM7000 sound file present on OO gauge version Assembled using live recordings of Black 5 locomotives. Tender speaker Tooling: Riveted smokebox door High smokebox steam lance Rivetted bufferbeam Capped top feed Without AWS Welded tender Livery: BR Lined Black with early ‘Cycling Lion’ emblem Authentic colours and typefaces used Gloss finish to locomotive except for cab and smokebox, which are matt. Era 4 - TT:120 Scale

Hornby Stanier 5MT 'Black 5' 45315 BR Lined Black (Early) (TT)

Stanier 5MT 'Black 5' 45315 BR Lined Black (Early) The 'Black 5's are now available in TT:120 scale! This iconic Stanier 5MT ‘Black 5’ model features the expertly researched and highly accurate CAD from its OO gauge cousin and is DCC ready for upgrade to HM7000 control. This LMS mixed-traffic workhorse is sure to make an impression on any TT:120 layout. This 'Black 5' model depicts No.45315 in British Railways Lined Black livery, with early ‘Cycling Lion’ emblem on the tender. Model Specification: Highly detailed model based on extensive research and design from the critically acclaimed OO gauge version Die-cast boiler and running plate Wealth of separately fitted parts, including boiler handrails, steam pipes, whistles, steps, and sanding pipes. Detailed cab interior Powerful coreless motor providing power to locomotive driving wheels Electrical pick-ups on driving wheels and tender wheels Brass connector rods and slide bars Pivoting NEM coupling sockets Accessory pack that includes optional snowplough and decorative coupling hook Minimum 2nd radius curves Electronics: Next18 DCC Decoder socket compatible with HM7000 system Decoder socket housed in tender for easy access Space for HM7070 Power Bank for uninterrupted running Tooling: Riveted smokebox door High smokebox steam lance Rivetted bufferbeam Capped top feed Without AWS Welded tender Livery: BR Lined Black with early ‘Cycling Lion’ emblem Authentic colours and typefaces used Gloss finish to locomotive except for cab and smokebox, which are matt. Era 4 - TT:120 Scale

Hornby Stanier 5MT 'Black 5' 45446 BR Lined Black (Late) (SF) (TT)

Stanier 5MT 'Black 5' 45446 BR Lined Black (Late) (SF) Here come the 'Black 5's - our latest addition to the TT:120 steam locomotive family. Featuring the expertly researched and highly accurate CAD from its OO gauge cousin, this BR Stanier 5MT is pre-Sound Fitted. This LMS mixed-traffic workhorse is sure to make an impression on any TT:120 layout, depicting No.45446 in British Railways Lined Black livery, with later ‘Lion and Wheel’ crest on the tender. Model Specification: Highly detailed model based on extensive research and design from the critically acclaimed OO gauge version Die-cast boiler and running plate Wealth of separately fitted parts, including boiler handrails, steam pipes, whistles, steps, and sanding pipes. Detailed cab interior Powerful coreless motor providing power to locomotive driving wheels Electrical pick-ups on driving wheels and tender wheels Brass connector rods and slide bars Pivoting NEM coupling sockets Accessory pack that includes optional snowplough and decorative coupling hook Minimum 2nd radius curves Electronics: Next18 DCC sound decoder fitted is compatible with HM7000 system Space for HM7070 Power Bank for uninterrupted running Sound: Utilises same high-fidelity HM7000 sound file present on OO gauge version Assembled using live recordings of Black 5 locomotives. Tender speaker Tooling: Riveted smokebox door No smokebox steam lance Rivetted bufferbeam Capped top feed With AWS Welded tender Livery: BR Lined Black with late crest on the tender 1960’s style OHWL stickers Sir W.G Armstrong Whitworth & Co. LTD builders plate Authentic colours and typefaces used Gloss finish to locomotive except for cab and smokebox, which are matt. Era 5 - TT:120 Scale

Hornby Stanier 5MT 'Black 5' 45446 BR Lined Black (Late) (TT)

Stanier 5MT 'Black 5' 45446 BR Lined Black (Late) This BR Stanier 5MT 'Black 5' 45446 was created using the expertly researched and highly accurate CAD from its OO gauge cousin, and is DCC Ready for upgrade to digital control if required. This LMS mixed-traffic workhorse is sure to make an impression on any TT:120 layout, depicting No.45446 in British Railways Lined Black livery, with later ‘Lion and Wheel’ crest on the tender. Model Specification: Highly detailed model based on extensive research and design from the critically acclaimed OO gauge version Die-cast boiler and running plate Wealth of separately fitted parts, including boiler handrails, steam pipes, whistles, steps, and sanding pipes. Detailed cab interior Powerful coreless motor providing power to locomotive driving wheels Electrical pick-ups on driving wheels and tender wheels Brass connector rods and slide bars Pivoting NEM coupling sockets Accessory pack that includes optional snowplough and decorative coupling hook Minimum 2nd radius curves Electronics: Next18 DCC Decoder socket compatible with HM7000 system Decoder socket housed in tender for easy access Space for HM7070 Power Bank for uninterrupted running Tooling: Riveted smokebox door No smokebox steam lance Rivetted bufferbeam Capped top feed With AWS Welded tender Livery: BR Lined Black with late crest on the tender 1960’s style OHWL stickers Sir W.G Armstrong Whitworth & Co. LTD builders plate Authentic colours and typefaces used Gloss finish to locomotive except for cab and smokebox, which are matt. Era 5 - TT:120 Scale

Hornby Stanier 5MT 'Black 5' 5408 LMS Lined Black (Sound Fitted) (TT)

Stanier 5MT 'Black 5' 5408 LMS Lined Black (Sound Fitted) The iconic Stanier 5MT ‘Black 5’ is the latest addition to the TT:120 steam locomotive family. Featuring the expertly researched and highly accurate CAD from its OO gauge cousin, and available in a Sound-Fitted format, this LMS mixed-traffic workhorse is sure to make an impression on any TT:120 layout.This BR Stanier 5MT 'Black 5' model depicts No. 5408 in late 1930’s LMS black livery with red lining, shaded gold lettering and numerals. Model Specification: Highly detailed model based on extensive research and design from the critically acclaimed OO gauge version Die-cast boiler and running plate Wealth of separately fitted parts, including boiler handrails, steam pipes, whistles, steps, and sanding pipes. Detailed cab interior Powerful coreless motor providing power to locomotive driving wheels Electrical pick-ups on driving wheels and tender wheels Brass connector rods and slide bars Pivoting NEM coupling sockets Accessory pack that includes optional snowplough and decorative coupling hook Minimum 2nd radius curves Electronics: Next18 DCC sound decoder fitted, which is compatible with HM7000 system Space for HM7070 Power Bank for uninterrupted running Sound: Utilises same high-fidelity HM7000 sound file present on OO gauge version Assembled using live recordings of Black 5 locomotives. Tender speaker Tooling: Riveted smokebox door High smokebox steam lance Flush bufferbeam Capped top feed Slide bar vacuum pump fitted Without AWS Welded tender Livery: LMS Lined Black 1936 style vermillion shaded gold lettering and numerals Gloss finish to locomotive except for cab and smokebox, which are matt. Era 3 - TT:120 Scale

Hornby Stanier 5MT 'Black 5' 5408 LMS Lined Black (TT)

Stanier 5MT 'Black 5' 5408 LMS Lined Black  The latest addition to the TT:120 steam locomotive family is the iconic Stanier 5MT ‘Black 5’. Featuring the expertly researched and highly accurate CAD from its OO gauge cousin, and with a DCC Ready decoder socket, this LMS mixed-traffic workhorse is sure to make an impression on any TT:120 layout.This model depicts No. 5408 in its late 1930’s LMS black livery, with red lining, shaded gold lettering and numerals. Model Specification: Highly detailed model based on extensive research and design from the critically acclaimed OO Gauge version Die-cast boiler and running plate Wealth of separately fitted parts, including boiler handrails, steam pipes, whistles, steps, and sanding pipes. Detailed cab interior Powerful coreless motor providing power to locomotive driving wheels Electrical pick-ups on driving wheels and tender wheels Brass connector rods and slide bars Pivoting NEM coupling sockets Accessory pack that includes optional snowplough and decorative coupling hook Minimum 2nd radius curves Electronics: Next18 DCC Decoder socket compatible with HM7000 system Decoder socket housed in tender for easy access Space for HM7070 Power Bank for uninterrupted running Tooling: Riveted smokebox door High smokebox steam lance Flush bufferbeam Capped top feed Slide bar vacuum pump fitted Without AWS Welded tender Livery: LMS Lined Black 1936 style vermillion shaded gold lettering and numerals Gloss finish to locomotive except for cab and smokebox, which are matt. Era 3 - TT:120 Scale

Hornby LNER J50 Class 68958 BR Black (Early) (TT)

LNER J50 Class 68958 BR Black (Early) Hot on the heels of the first run of J50’s, is this BR (Early) J50 Class 68958 tank engine for your TT:120 collection. Moulded in both die-cast and plastic, this characterful locomotive looks and performs excellently thanks to all-wheel pickups and a smooth coreless motor. For those operating on DCC, a 6-Pin decoder socket is located within the boiler and is compatible with HM7000.  This example depicts No.68958 in BR Black livery, with early emblems on the tank sides. Model Specification: Based on new J50 tooling suite Expertly moulded die-cast body and chassis for added realism and weight Number of separately fitted parts, including smokebox door, water filler caps, chimney, safety valves, handrails, lamp irons and buffers. Brass double-jointed connector rods with metal securing pins Detailed cab interior Pivoting NEM sockets for improved coupling around tight curves Precision-engineered coreless motor for smooth running All-wheel pick-ups Accessory pack Capable of traversing 1st radius curves, but recommended minimum is 2nd radius. Electronics: 6-Pin DCC Decoder socket compatible with HM7000 system. Tooling: Smokebox door numberplate Coal rails Livery: BR Plain Black Livery ‘Cycling Lion’ Early Emblem on tank sides Authentic colours and typefaces used Semi-gloss finish Era 4. - TT:120 Scale

Hornby A1X Terrier 10 Isle of Wight Central Railway Lined Maroon (TT)

A1X Terrier 10 Isle of Wight Central Railway Lined Maroon The delightful LB&SCR A1/A1X 0-6-0 Terrier Steam Locomotive is back in TT:120 scale, featuring the latest tooling suite from 2025. This beautiful representation of the ever-popular Class A1 perfectly captures the diminutive character of the prototype, and has been designed for smooth and reliable operation, including the option for digital command control via a 6-pin decoder socket (decoder sold seperately). This particular example depicts No.10 in Isle of Wight Central Railway Lined Maroon livery. Model Specification: Based on the highly accurate 2025 A1/A1X Terrier tooling suite Expertly moulded die-cast body and chassis for added realism and weight Number of separately fitted parts, including smokebox door, water filler caps, handrails, lamp irons and buffers. Brass connector rods with metal securing pins Detailed cab interior Pivoting NEM sockets for improved coupling around tight curves Precision-engineered coreless motor for smooth running All-wheel pick-ups Accessory pack Capable of traversing 1st radius curves, but recommended minimum is 2nd radius. Electronics: 6-Pin DCC Decoder socket compatible with HM7000 system Tooling: Stroudley chimney Flush smokebox door Four lamp brackets on front and rear Low bufferstock with no lamp brackets Steam pipes removed Small cab bunker with no coal rails Westinghouse pump fitted Livery: IOW Lined Maroon - TT:120 Scale

Hornby A1X Terrier 655 'Stepney' LB&SCR Improved Engine Green (TT)

A1X Terrier 655 'Stepney' LB&SCR Improved Engine Green The delightful TT:120 scale LB&SCR A1/A1X 0-6-0 Terrier Steam Locomotive is back, utilising the highly accurate tooling suite from 2025. This beautiful representation of the ever-popular Class A1 perfectly captures the diminutive character of the prototype, and has been designed for smooth and reliable operation, including the provision for digital command control via a 6-pin decoder socket.  This particular example depicts No.655 ‘Stepney’ in London Brighton & South Coast Railway Improved Engine Green. Model Specification: Based on 2025 A1/A1X Terrier tooling suite Expertly moulded die-cast body and chassis for added realism and weight Number of separately fitted parts, including smokebox door, water filler caps, handrails, lamp irons and buffers. Brass connector rods with metal securing pins Detailed cab interior Pivoting NEM sockets for improved coupling around tight curves Precision-engineered coreless motor for smooth running All-wheel pick-ups Accessory pack Capable of traversing 1st radius curves, but recommended minimum is 2nd radius. Electronics: 6-Pin DCC Decoder socket compatible with HM7000 system. Tooling: Stroudley chimney Flush smokebox door Four lamp brackets on front and rear Low bufferstock with no lamp brackets Steam pipes removed Small cab bunker with no coal rails Westinghouse pump fitted. Livery: LB&SCR Improved Engine Green Maroon chassis Era 2. - TT:120 Scale

Hornby A1X Terrier 735 LSWR Lined Green (TT)

A1X Terrier 735 LSWR Lined Green  This delightful TT:120 scale LB&SCR A1/A1X 0-6-0 Terrier Steam Locomotive model features the highly accurate 2025 tooling suite. A beautiful representation of the ever-popular Class A1, the model perfectly captures the diminutive character of the prototype, and has been designed for smooth and reliable operation, including provision for digital command control via a 6-pin decoder socket. This particular example depicts No.735 in London and South Western Railway Lined Green livery. Model Specification: Based on new 2025 A1/A1X Terrier tooling suite Expertly moulded die-cast body and chassis for added realism and weight Number of separately fitted parts, including smokebox door, water filler caps, handrails, lamp irons and buffers. Brass connector rods with metal securing pins Detailed cab interior Pivoting NEM sockets for improved coupling around tight curves Precision-engineered coreless motor for smooth running All-wheel pick-ups Accessory pack Capable of traversing 1st radius curves, but recommended minimum is 2nd radius. Electronics: 6-Pin DCC Decoder socket compatible with HM7000 system Tooling: Stroudley chimney Flush smokebox door Four lamp brackets on front and rear Low bufferstock with no lamp brackets Steam pipes fitted Small cab bunker with no coal rails Westinghouse pump removed Livery: LSWR Lined Green Livery Maroon edging to tank and cab sides - TT:120 Scale

Hornby BR Class 43 HST 43128 & 43135 Scotrail Inter7City (Sound Fitted)

BR Class 43 HST 43128 & 43135 Scotrail Inter7City Train Pack (Sound Fitted) The Class 43 HST Power Cars have been a mainstay of the Hornby OO and TT:120 ranges for many years and we are delighted to announce this special commemorative train pack in OO Gauge, depicting 43128 and 43135 in ScotRail ‘InterCity 7’ livery, which are still in service as part of the last HST fleet in passenger operation in the UK. Based on the refreshed tooling suite and featuring working directional and cab lights, working roof fans, 5-pole motor with twin flywheels in the motorised car, diecast chassis and numerous separately fitted parts, this train pack is a must-have for collectors and fans of this classic British design. This train pack is DCC Sound Fitted with a sound decoder in both power cars. Features: Twin pack of highly detailed Class 43 models Motorised Power Car and Unmotorised Dummy Car Die-cast chassis Separately fitted parts including cab handrails, underframe equipment and roof exhaust shroud Detailed cab interior 5-pole motor with twin flywheels in motorised car capable of pulling full-length HST rakes Electrical pick-ups on both motorised/unmotorised bogies Pivoting NEM coupling sockets Accessory pack Minimum 2nd radius curves Working directional and cab headlights Working roof fans 21-Pin sound decoder fitted in both power cars Speaker in both power cars Space for HM7070 Power Bank for uninterrupted running Utilises high-fidelity HM7000 sound file created using live recordings of Class 43 locomotives. - OO Scale

Hornby BR Class 43 HST 43128 & 43135 Scotrail Inter7City Train Pack

BR Class 43 HST 43128 & 43135 Scotrail Inter7City Train Pack The Class 43 HST Power Cars have been a mainstay of the Hornby OO and TT:120 ranges for many years and we are delighted to announce this special commemorative train pack in OO Gauge, depicting 43128 and 43135 in ScotRail ‘InterCity 7’ livery, which are still in service as part of the last HST fleet in passenger operation in the UK. Based on the refreshed tooling suite and featuring working directional and cab lights, working roof fans, 5-pole motor with twin flywheels in the motorised car, die-cast chassis and numerous separately fitted parts, this train pack is a must-have for collectors and fans of this classic British design. Features: Twin pack of highly detailed Class 43 models Motorised Power Car and Unmotorised Dummy Car Die-cast chassis Separately fitted parts including cab handrails, underframe equipment and roof exhaust shroud Detailed cab interior 5-pole motor with twin flywheels in motorised car capable of pulling full-length HST rakes Electrical pick-ups on both motorised/unmotorised bogies Pivoting NEM coupling sockets Accessory pack Minimum 2nd radius curves Working directional and cab headlights Working roof fans DCC Ready with 21-Pin decoder socket in motorised/dummy cars compatible with HM7000 system Space for HM7000-21TXS Sound Decoder to be fitted Space for HM7070 Power Bank for uninterrupted running Some light functions will only operate to their fullest capability on DCC - OO Scale 

Hornby SR Merchant Navy 21C4 'Cunard White Star' (TXS Steam Generator)

SR Merchant Navy 21C4 'Cunard White Star' (TXS Steam Generator) The popular Bulleid Pacific Merchant Navy is back in OO gauge with a brand new livery and steam generator technology. This highly detailed model represents the air-smoothed 'Spam Can', also known as 21C4 'Cunard White Star' in Southern Railways' malachite green. A must-have model for Southern Region collectors, this feature-packed locomotive is pre-fitted with HM7000 control, for the most satisfying model railway experience yet. Please Note: This model requires a DCC controller or the HM7000 App to control. Details: Highly detailed cab with fully decorated backhead and decorated instrument dials  Opening cab roof vent  Removable simulated coal load with fully detailed tender bunker  Accurately modelled Merchant Navy Bullied-Firth-Brown wheels  Modified 21C4 'widows peak' front end streamlining and chimney arrangement  5000 gallon tender with rear access ladders.  Cast trailing truck  Separately fitted nameplate, number plate, and company ownership plate  Circular smokebox door company plate  Sprung metal buffers  Heavy die-cast chassis, pony truck, and trailing truck  Features: Pre-fitted steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element).  Pre-fitted 21-pin HM7000 decoder and speaker. The decoder is compatible with NMRA DCC controllers and HM7000 app control.  Pre-installed Merchant Navy sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect.  Adjustable steam output settings via the decoder  Water reservoir for up to 20 minutes of continuous steam running  Die-cast connecting rods and valve gear  Powerful 5-pole skew-wound motor  Flywheel with cardan shaft arrangement for smooth running  Oilite main drive bearings Wheel pickups on tender and driven locomotive wheelsets  Pogo pin wheel pickup arrangement for easy pickup servicing  8-way locomotive to tender drawbar, with integrated electrical connection for easy coupling and decoupling.  Front and rear NEM coupling pockets, with narrow tension lock couplings  Optional fit rear flanged wheelset (only recommended for larger layouts with sweeping curves or display purposes).  - OO Scale 

Rapido UK Caledonian 'Single' ‘What If’ BR Lined Black Early No.54010

Caledonian 'Single' ‘What If’ BR Lined Black Early No.54010 Caledonian Railway ‘Single’ 4-2-2 ‘What If’ BR Lined Black Early Crest No.54010 Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets - OO Scale  

Rapido UK Caledonian 'Single' CR Blue Railtour Condition No.123

Caledonian Railway 'Single' CR Blue Railtour Condition No.123 Caledonian Railway ‘Single’ 4-2-2 Caledonian Railway Blue No.123 – Railtour Condition Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets - OO Scale

Rapido UK Caledonian 'Single' CR Blue Railtour Condition No.123 (SF)

Caledonian 'Single' CR Blue Railtour Condition No.123 (Sound Fitted) Caledonian Railway ‘Single’ 4-2-2 Caledonian Railway Blue No.123 – Railtour Condition Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets - OO Scale

Rapido UK Caledonian 'Single' LMS Lined Black No.14010

Caledonian 'Single' LMS Lined Black No.14010 Caledonian Railway ‘Single’ 4-2-2 LMS Lined Black No.14010 Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets - OO Scale  

Rapido UK Caledonian 'Single' LMS Lined Crimson No.14010

Caledonian 'Single' LMS Lined Crimson No.14010 Caledonian Railway ‘Single’ 4-2-2 LMS Lined Crimson No.14010 (post-1927 rebuild) Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets - OO Scale  

Hornby Railroad: Class 66 GBRf 66775 'HMS Argyll' (DCC Sound Fitted)

Railroad: Class 66 GBRf 66775 'HMS Argyll' (DCC Sound Fitted) Product Information: The Railroad GBRf Class 66 66775 'HMS Argyll' model is a faithful replica of the original locomotive, featuring a HM7000 21-pin sound decoder preloaded with realistic Class 66 sound recordings and etched nameplates. History: Built in Muncie, Indiana and entering service under No. 66775, this locomotive was named in 2017 after the famous and oldest serving Type 23 frigates in the Royal Navy, ‘HMS Argyll’. It carries the pennant number F231 on its bodyside with the Royal Navy white ensign and crest on the cab sides in celebration of the famous Frigate. 

Bachmann LMS 10001 BR Lined Green (Late Crest) (Sound Fitted)

LMS 10001 BR Lined Green (Late Crest) (Sound Fitted) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and this Bachmann Branchline model pays homage to the youngest of the pair, 10001. Built by the LMS and so becoming part of the Midland Region’s fleet under BR, after five years in traffic the ‘Twins’ were sent to the Southern Region (SR) between 1953 and 1955 for trails alongside the SR’s own prototype diesels. To work on the SR, additional headcode lights and brackets were fitted to suit the Southern 6 position headcode system and these remained a feature of both locomotives thereafter, as displayed on this model of No. 10001 which is depicted in BR Green livery and with the late crests that were applied by BR from 1956. By this time the pair had returned to the Midland Region and were employed on duties across the region. The Bachmann Branchline model of No. 10001 is a highly detailed replica of the prototype, adorned with numerous separately fitted components to accurately capture the appearance of this pioneering machine. The livery application captures the splendour of this elegant locomotive, whilst engine room detailing has been replicated through the bodyside windows for the first time. Inside, the proven combination of a five pole motor and twin flywheels, driving both bogies and with all-wheel drive will provide enough power for any prototypical train. Smooth running is assured thanks to the use of separate metal bearings on each axle. The 21 Pin DCC decoder socket makes it easy to equip this model for DCC use, and there’s space for a speaker to be fitted if you wish to add sound. Details: Pristine BR Lined Green Late Crest livery Running No. 10001 Six Headcode Lights & Brackets at each end Smooth Bodysides (No Steps) Water Scoops Fitted Features: Powerful 5 Pole Motor NEM Coupling Pockets Directional Lighting Chassis mounted switches allow tail lights to be turned off and provide a choice between Passenger or Freight headcode light configurations Cab Lighting Detailed Cab Interior with pre-fitted crew in one cab Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 254mm (over couplings) - OO Scale

Bachmann LMS 10000 BR Black (Early)

LMS 10000 BR Black (Early) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and this Bachmann Branchline model tells the story of No. 10000 during its time working on the Southern Region. Built by the LMS and so becoming part of the Midland Region’s fleet under BR, after five years in traffic the ‘Twins’ were sent to the Southern Region (SR) between 1953 and 1955 for trails alongside the SR’s own prototype diesels. To work on the SR, additional headcode lights and brackets were fitted to suit the Southern 6 position headcode system as displayed on this model of No. 10000, which is depicted in its striking black and silver livery with early emblems. The Bachmann Branchline model is a highly detailed replica of the pioneering prototype, adorned with numerous separately fitted components to accurately capture the appearance of this iconic machine. The livery application captures the splendour of this elegant locomotive, whilst engine room detailing has been replicated through the bodyside windows for the first time. Inside, the proven combination of a five pole motor and twin flywheels, driving both bogies and with all-wheel drive will provide enough power for any prototypical train. Smooth running is assured thanks to the use of separate metal bearings on each axle. The 21 Pin DCC decoder socket makes it easy to equip this model for DCC use, and there’s space for a speaker to be fitted if you wish to add sound. Details: Pristine BR Black & Silver Early Emblem livery Running No. 10000 Six Headcode Lights & Brackets at each end Bodysides Steps Water Scoops Fitted Features: Powerful 5 Pole Motor NEM Coupling Pockets Directional Lighting Chassis mounted switches allow tail lights to be turned off and provide a choice between Passenger or Freight headcode light configurations Cab Lighting Detailed Cab Interior with pre-fitted crew in one cab Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 254mm (over couplings) - OO Scale

Bachmann LMS 10000 BR Black (Early) (Sound Fitted)

LMS 10000 BR Black (Early) (Sound Fitted) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and this Bachmann Branchline model tells the story of No. 10000 during its time working on the Southern Region. Built by the LMS and so becoming part of the Midland Region’s fleet under BR, after five years in traffic the ‘Twins’ were sent to the Southern Region (SR) between 1953 and 1955 for trails alongside the SR’s own prototype diesels. To work on the SR, additional headcode lights and brackets were fitted to suit the Southern 6 position headcode system as displayed on this model of No. 10000, which is depicted in its striking black and silver livery with early emblems. The Bachmann Branchline model is a highly detailed replica of the pioneering prototype, adorned with numerous separately fitted components to accurately capture the appearance of this iconic machine. The livery application captures the splendour of this elegant locomotive, whilst engine room detailing has been replicated through the bodyside windows for the first time. Inside, the proven combination of a five pole motor and twin flywheels, driving both bogies and with all-wheel drive will provide enough power for any prototypical train. Smooth running is assured thanks to the use of separate metal bearings on each axle. The 21 Pin DCC decoder socket makes it easy to equip this model for DCC use, and there’s space for a speaker to be fitted if you wish to add sound. Details: Pristine BR Black & Silver Early Emblem livery Running No. 10000 Six Headcode Lights & Brackets at each end Bodysides Steps Water Scoops Fitted Features: Powerful 5 Pole Motor NEM Coupling Pockets Directional Lighting Chassis mounted switches allow tail lights to be turned off and provide a choice between Passenger or Freight headcode light configurations Cab Lighting Detailed Cab Interior with pre-fitted crew in one cab Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 254mm (over couplings) - OO Scale

Bachmann LMS 10001 BR Lined Green (Late Crest)

LMS 10001 BR Lined Green (Late Crest) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and this Bachmann Branchline model pays homage to the youngest of the pair, 10001. Built by the LMS and so becoming part of the Midland Region’s fleet under BR, after five years in traffic the ‘Twins’ were sent to the Southern Region (SR) between 1953 and 1955 for trails alongside the SR’s own prototype diesels. To work on the SR, additional headcode lights and brackets were fitted to suit the Southern 6 position headcode system and these remained a feature of both locomotives thereafter, as displayed on this model of No. 10001 which is depicted in BR Green livery and with the late crests that were applied by BR from 1956. By this time the pair had returned to the Midland Region and were employed on duties across the region. The Bachmann Branchline model of No. 10001 is a highly detailed replica of the prototype, adorned with numerous separately fitted components to accurately capture the appearance of this pioneering machine. The livery application captures the splendour of this elegant locomotive, whilst engine room detailing has been replicated through the bodyside windows for the first time. Inside, the proven combination of a five pole motor and twin flywheels, driving both bogies and with all-wheel drive will provide enough power for any prototypical train. Smooth running is assured thanks to the use of separate metal bearings on each axle. The 21 Pin DCC decoder socket makes it easy to equip this model for DCC use, and there’s space for a speaker to be fitted if you wish to add sound. Details: Pristine BR Lined Green Late Crest livery Running No. 10001 Six Headcode Lights & Brackets at each end Smooth Bodysides (No Steps) Water Scoops Fitted Features: Powerful 5 Pole Motor NEM Coupling Pockets Directional Lighting Chassis mounted switches allow tail lights to be turned off and provide a choice between Passenger or Freight headcode light configurations Cab Lighting Detailed Cab Interior with pre-fitted crew in one cab Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 254mm (over couplings) - OO Scale

Bachmann MR 3835 (4F) w/ Fowler Tender 43892 BR Black

MR 3835 (4F) w/ Fowler Tender 43892 BR Black The 4Fs were simple yet beautiful machines and the Branchline model pays homage to that with high fidelity mouldings for the main components like the smokebox, boiler, firebox and cab, which are all mounted on a diecast metal running plate. Countless separate detailing parts are then added like the metal handrails, turned brass safety valves, lamp irons and lubricators. Sprung metal buffers are fitted to both bufferbeams. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. This attention to detail extends to the tender, while the tender drawbar is adjustable to suit individual layout conditions and electrical connections are incorporated into the drawbar. Look inside the cab and you will find a sublime level of detail; the boiler backhead boasts an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. A poseable fallplate is fitted to the rear of the cab to complete the look. The Branchline 4F runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine BR Black ‘British Railways’ livery Running No. 43892 Fowler Tender with Water Pickup Gear Short Chimney Ross Pop Safety Valves Fluted Connecting Rods Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 221mm (over couplings) OO Scale 

Bachmann MR 3835 (4F) w/ Fowler Tender 43892 BR Black (SF)

MR 3835 (4F) w/ Fowler Tender 43892 BR Black (Sound Fitted) The 4Fs were simple yet beautiful machines and the Branchline model pays homage to that with high fidelity mouldings for the main components like the smokebox, boiler, firebox and cab, which are all mounted on a diecast metal running plate. Countless separate detailing parts are then added like the metal handrails, turned brass safety valves, lamp irons and lubricators. Sprung metal buffers are fitted to both bufferbeams. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. This attention to detail extends to the tender, while the tender drawbar is adjustable to suit individual layout conditions and electrical connections are incorporated into the drawbar. Look inside the cab and you will find a sublime level of detail; the boiler backhead boasts an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. A poseable fallplate is fitted to the rear of the cab to complete the look. The Branchline 4F runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine BR Black ‘British Railways’ livery Running No. 43892 Fowler Tender with Water Pickup Gear Short Chimney Ross Pop Safety Valves Fluted Connecting Rods Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack SOUND FITTED – Fitted with a ESU Loksound V5DCC 21 Pin DCC Sound Decoder Length 221mm (over couplings) OO Scale 

Bachmann MR 3835 (4F) w/ Fowler Tender 43982 BR Black (Late)

MR 3835 (4F) w/ Fowler Tender 43982 BR Black (Late) The 4Fs were simple yet beautiful machines and the Branchline model pays homage to that with high fidelity mouldings for the main components like the smokebox, boiler, firebox and cab, which are all mounted on a diecast metal running plate. Countless separate detailing parts are then added like the metal handrails, turned brass safety valves, lamp irons and lubricators. Sprung metal buffers are fitted to both bufferbeams. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. This attention to detail extends to the tender, while the tender drawbar is adjustable to suit individual layout conditions and electrical connections are incorporated into the drawbar. Look inside the cab and you will find a sublime level of detail; the boiler backhead boasts an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. A poseable fallplate is fitted to the rear of the cab to complete the look. The Branchline 4F runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine BR Black Late Crest livery Running No. 43982 Fowler Tender with Water Pickup Gear Short Chimney Ross Pop Safety Valves Fluted Connecting Rods Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 221mm (over couplings) OO Scale 

Bachmann MR 3835 (4F) w/ Johnson-Deeley Tender 3850 LMS Black (SF)

MR 3835 (4F) w/ Johnson-Deeley Tender 3850 LMS Black (Sound Fitted) The 4Fs were simple yet beautiful machines and the Branchline model pays homage to that with high fidelity mouldings for the main components like the smokebox, boiler, firebox and cab, which are all mounted on a diecast metal running plate. Countless separate detailing parts are then added like the metal handrails, turned brass safety valves, lamp irons and lubricators. Sprung metal buffers are fitted to both bufferbeams. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. This attention to detail extends to the tender, while the tender drawbar is adjustable to suit individual layout conditions and electrical connections are incorporated into the drawbar. Look inside the cab and you will find a sublime level of detail; the boiler backhead boasts an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. A poseable fallplate is fitted to the rear of the cab to complete the look. The Branchline 4F runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine LMS Black livery Running No. 3850 Johnson-Deeley Tender Tall Chimney with Capuchon Ramsbottom Safety Valves Fluted Connecting Rods Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack SOUND FITTED – Fitted with a ESU Loksound V5DCC 21 Pin DCC Sound Decoder Length 221mm (over couplings) OO Scale 

Bachmann LMS Jubliee 45671 'Prince Rupert' BR Lined Green (Early)

LMS Jubliee w/Riveted Tender 45671 'Prince Rupert' BR Lined Green (Early) The LMS Jubilee Class locomotive has long been a popular model in the Bachmann Branchline steam portfolio and for 2026 the Jubilee returns, better than ever before and with new tooling to allow models of the entire Class to be offered to modern standards for the first time. The Branchline model is constructed around a diecast metal running plate and employs precision moulded components like the boiler, firebox and cab which are then adorned with countless separate detailing parts like the metal handrails, turned brass safety valves and whistle, lamp irons, lubricators and sandboxes. With authentic pattern driving wheels and a detailed front bogie, the chassis is further enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. With a powerful three pole motor and a proven drive train, the Branchline Jubilee is surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Upgraded to include a firebox lighting system that works on both analogue and DCC, the DCC provision has also been enhanced and a Plux22 DCC decoder socket is now fitted in the tender along with a pre-fitted speaker making it easy to add sound. Details: Pristine BR Lined Green Early Emblem livery Running No. 45671 Named ‘Prince Rupert’ Etched Nameplates included Long Firebox Single Chimney Riveted Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate Features: Equipped with a Plux22 DCC Decoder Socket – Recommend Decoder  item No. 36-570A Length 261mm (over couplings) Three pole motor mounted in the locomotive, driving the central set of driving wheels Electrical pickup from all driving wheels along with tender pickups Diecast metal chassis block (locomotive) Gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front bogie with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate Precision moulded boiler & firebox, cab, tender tank and tender chassis Separately fitted smokebox door which is mounted on hinges and can be posed open or closed Separately applied details including chimney, smokebox saddle, splashers, sandboxes, lubricators, water pick-up gear, reverser, lamp irons and smokebox door handles Individual metal detail components including handrails, handrail knobs, whistle, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator and reverser Hinged and posable metal fall plate between the locomotive and tender Sliding cab roof ventilator which can be posed open or closed Tender fitted with removable coal-effect load, with empty coal space modelled beneath Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in the tender of all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder pre-installed in SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Jubilee using recordings from real locomotives OO Scale  

Bachmann LMS Jubliee 45671 'Prince Rupert' BR Lined Green (Early) (SF)

LMS Jubliee w/Riveted Tender 45671 'Prince Rupert' BR Lined Green (Early) (Sound Fitted) The LMS Jubilee Class locomotive has long been a popular model in the Bachmann Branchline steam portfolio and for 2026 the Jubilee returns, better than ever before and with new tooling to allow models of the entire Class to be offered to modern standards for the first time. The Branchline model is constructed around a diecast metal running plate and employs precision moulded components like the boiler, firebox and cab which are then adorned with countless separate detailing parts like the metal handrails, turned brass safety valves and whistle, lamp irons, lubricators and sandboxes. With authentic pattern driving wheels and a detailed front bogie, the chassis is further enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. With a powerful three pole motor and a proven drive train, the Branchline Jubilee is surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Upgraded to include a firebox lighting system that works on both analogue and DCC, the DCC provision has also been enhanced and a Plux22 DCC decoder socket is now fitted in the tender along with a pre-fitted speaker making it easy to add sound. Details: Pristine BR Lined Green Early Emblem livery Running No. 45671 Named ‘Prince Rupert’ Etched Nameplates included Long Firebox Single Chimney Riveted Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate Features: SOUND FITTED – Fitted with a Zimo MS450P22 Plux22 DCC Sound Decoder Length 261mm (over couplings) Three pole motor mounted in the locomotive, driving the central set of driving wheels Electrical pickup from all driving wheels along with tender pickups Diecast metal chassis block (locomotive) Gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front bogie with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate Precision moulded boiler & firebox, cab, tender tank and tender chassis Separately fitted smokebox door which is mounted on hinges and can be posed open or closed Separately applied details including chimney, smokebox saddle, splashers, sandboxes, lubricators, water pick-up gear, reverser, lamp irons and smokebox door handles Individual metal detail components including handrails, handrail knobs, whistle, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator and reverser Hinged and posable metal fall plate between the locomotive and tender Sliding cab roof ventilator which can be posed open or closed Tender fitted with removable coal-effect load, with empty coal space modelled beneath Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in the tender of all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder pre-installed in SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Jubilee using recordings from real locomotives OO Scale

Bachmann LMS Jubliee 5742 'Connaught' LMS Crimson Lake

LMS Jubliee w/ Riveted Tender 5742 'Connaught' LMS Crimson Lake The LMS Jubilee Class locomotive has long been a popular model in the Bachmann Branchline steam portfolio and for 2026 the Jubilee returns, better than ever before and with new tooling to allow models of the entire Class to be offered to modern standards for the first time. The Branchline model is constructed around a diecast metal running plate and employs precision moulded components like the boiler, firebox and cab which are then adorned with countless separate detailing parts like the metal handrails, turned brass safety valves and whistle, lamp irons, lubricators and sandboxes. With authentic pattern driving wheels and a detailed front bogie, the chassis is further enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. With a powerful three pole motor and a proven drive train, the Branchline Jubilee is surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Upgraded to include a firebox lighting system that works on both analogue and DCC, the DCC provision has also been enhanced and a Plux22 DCC decoder socket is now fitted in the tender along with a pre-fitted speaker making it easy to add sound. Details: Pristine LMS Crimson Lake livery Running No. 5742 Named ‘Connaught’ Etched Nameplates included Long Firebox Double Chimney Riveted Stanier 4,000-gallon Tender Smokebox Door with Small Numberplate Features: Equipped with a Plux22 DCC Decoder Socket – Recommend Decoder  item No. 36-570A Length 261mm (over couplings) Three pole motor mounted in the locomotive, driving the central set of driving wheels Electrical pickup from all driving wheels along with tender pickups Diecast metal chassis block (locomotive) Gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front bogie with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate Precision moulded boiler & firebox, cab, tender tank and tender chassis Separately fitted smokebox door which is mounted on hinges and can be posed open or closed Separately applied details including chimney, smokebox saddle, splashers, sandboxes, lubricators, water pick-up gear, reverser, lamp irons and smokebox door handles Individual metal detail components including handrails, handrail knobs, whistle, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator and reverser Hinged and posable metal fall plate between the locomotive and tender Sliding cab roof ventilator which can be posed open or closed Tender fitted with removable coal-effect load, with empty coal space modelled beneath Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in the tender of all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder pre-installed in SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Jubilee using recordings from real locomotives OO Scale

Bachmann LMS Jubliee 5742 'Connaught' LMS Crimson Lake (SF)

LMS Jubliee w/ Riveted Tender 5742 'Connaught' LMS Crimson Lake (Sound Fitted) The LMS Jubilee Class locomotive has long been a popular model in the Bachmann Branchline steam portfolio and for 2026 the Jubilee returns, better than ever before and with new tooling to allow models of the entire Class to be offered to modern standards for the first time. The Branchline model is constructed around a diecast metal running plate and employs precision moulded components like the boiler, firebox and cab which are then adorned with countless separate detailing parts like the metal handrails, turned brass safety valves and whistle, lamp irons, lubricators and sandboxes. With authentic pattern driving wheels and a detailed front bogie, the chassis is further enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. With a powerful three pole motor and a proven drive train, the Branchline Jubilee is surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Upgraded to include a firebox lighting system that works on both analogue and DCC, the DCC provision has also been enhanced and a Plux22 DCC decoder socket is now fitted in the tender along with a pre-fitted speaker making it easy to add sound. Details: Pristine LMS Crimson Lake livery Running No. 5742 Named ‘Connaught’ Etched Nameplates included Long Firebox Double Chimney Riveted Stanier 4,000-gallon Tender Smokebox Door with Small Numberplate Features: SOUND FITTED – Fitted with a Zimo MS450P22 Plux22 DCC Sound Decoder Length 261mm (over couplings) Three pole motor mounted in the locomotive, driving the central set of driving wheels Electrical pickup from all driving wheels along with tender pickups Diecast metal chassis block (locomotive) Gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front bogie with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate Precision moulded boiler & firebox, cab, tender tank and tender chassis Separately fitted smokebox door which is mounted on hinges and can be posed open or closed Separately applied details including chimney, smokebox saddle, splashers, sandboxes, lubricators, water pick-up gear, reverser, lamp irons and smokebox door handles Individual metal detail components including handrails, handrail knobs, whistle, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator and reverser Hinged and posable metal fall plate between the locomotive and tender Sliding cab roof ventilator which can be posed open or closed Tender fitted with removable coal-effect load, with empty coal space modelled beneath Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in the tender of all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder pre-installed in SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Jubilee using recordings from real locomotives OO Scale

Bachmann LMS Jubilee 45596 'Bahamas' BR Lined Green (Late) (SF)

LMS Jubilee w/Welded Tender 45596 'Bahamas' BR Lined Green (Late) (Sound Fitted) The LMS Jubilee Class locomotive has long been a popular model in the Bachmann Branchline steam portfolio and for 2026 the Jubilee returns, better than ever before and with new tooling to allow models of the entire Class to be offered to modern standards for the first time. The Branchline model is constructed around a diecast metal running plate and employs precision moulded components like the boiler, firebox and cab which are then adorned with countless separate detailing parts like the metal handrails, turned brass safety valves and whistle, lamp irons, lubricators and sandboxes. With authentic pattern driving wheels and a detailed front bogie, the chassis is further enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. With a powerful three pole motor and a proven drive train, the Branchline Jubilee is surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Upgraded to include a firebox lighting system that works on both analogue and DCC, the DCC provision has also been enhanced and a Plux22 DCC decoder socket is now fitted in the tender along with a pre-fitted speaker making it easy to add sound. Details: Locomotive is Preserved Pristine BR Lined Green Late Crest livery Running No. 45596 Named ‘Bahamas’ Etched Nameplates included Short Firebox Double Chimney Welded Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate AWS Equipment Features: SOUND FITTED – Fitted with a Zimo MS450P22 Plux22 DCC Sound Decoder Length 261mm (over couplings) Three pole motor mounted in the locomotive, driving the central set of driving wheels Electrical pickup from all driving wheels along with tender pickups Diecast metal chassis block (locomotive) Gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front bogie with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate Precision moulded boiler & firebox, cab, tender tank and tender chassis Separately fitted smokebox door which is mounted on hinges and can be posed open or closed Separately applied details including chimney, smokebox saddle, splashers, sandboxes, lubricators, water pick-up gear, reverser, lamp irons and smokebox door handles Individual metal detail components including handrails, handrail knobs, whistle, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator and reverser Hinged and posable metal fall plate between the locomotive and tender Sliding cab roof ventilator which can be posed open or closed Tender fitted with removable coal-effect load, with empty coal space modelled beneath Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in the tender of all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder pre-installed in SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Jubilee using recordings from real locomotives OO Scale  

Bachmann LMS Jubilee 45704 'Leviathan' BR Lined Green (Late)

LMS Jubilee w/Fowler Tender 45704 'Leviathan' BR Lined Green (Late) The LMS Jubilee Class locomotive has long been a popular model in the Bachmann Branchline steam portfolio and for 2026 the Jubilee returns, better than ever before and with new tooling to allow models of the entire Class to be offered to modern standards for the first time. The Branchline model is constructed around a diecast metal running plate and employs precision moulded components like the boiler, firebox and cab which are then adorned with countless separate detailing parts like the metal handrails, turned brass safety valves and whistle, lamp irons, lubricators and sandboxes. With authentic pattern driving wheels and a detailed front bogie, the chassis is further enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. With a powerful three pole motor and a proven drive train, the Branchline Jubilee is surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Upgraded to include a firebox lighting system that works on both analogue and DCC, the DCC provision has also been enhanced and a Plux22 DCC decoder socket is now fitted in the tender along with a pre-fitted speaker making it easy to add sound. Details: Pristine BR Lined Green Late Crest livery Running No. 45704 Named ‘Leviathan’ Etched Nameplates included Long Firebox Single Chimney Riveted Fowler 3,500-gallon Tender with Water Pick-Up Gear Smokebox Door with Large Numberplate AWS Equipment Features: Equipped with a Plux22 DCC Decoder Socket – Recommend Decoder  item No. 36-570A Length 261mm (over couplings) Three pole motor mounted in the locomotive, driving the central set of driving wheels Electrical pickup from all driving wheels along with tender pickups Diecast metal chassis block (locomotive) Gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front bogie with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate Precision moulded boiler & firebox, cab, tender tank and tender chassis Separately fitted smokebox door which is mounted on hinges and can be posed open or closed Separately applied details including chimney, smokebox saddle, splashers, sandboxes, lubricators, water pick-up gear, reverser, lamp irons and smokebox door handles Individual metal detail components including handrails, handrail knobs, whistle, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator and reverser Hinged and posable metal fall plate between the locomotive and tender Sliding cab roof ventilator which can be posed open or closed Tender fitted with removable coal-effect load, with empty coal space modelled beneath Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in the tender of all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder pre-installed in SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Jubilee using recordings from real locomotives OO Scale  

Bachmann LMS Jubilee 45704 'Leviathan' BR Lined Green (Late) (SF)

LMS Jubilee w/Fowler Tender 45704 'Leviathan' BR Lined Green (Late) (Sound Fitted) The LMS Jubilee Class locomotive has long been a popular model in the Bachmann Branchline steam portfolio and for 2026 the Jubilee returns, better than ever before and with new tooling to allow models of the entire Class to be offered to modern standards for the first time. The Branchline model is constructed around a diecast metal running plate and employs precision moulded components like the boiler, firebox and cab which are then adorned with countless separate detailing parts like the metal handrails, turned brass safety valves and whistle, lamp irons, lubricators and sandboxes. With authentic pattern driving wheels and a detailed front bogie, the chassis is further enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. With a powerful three pole motor and a proven drive train, the Branchline Jubilee is surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Upgraded to include a firebox lighting system that works on both analogue and DCC, the DCC provision has also been enhanced and a Plux22 DCC decoder socket is now fitted in the tender along with a pre-fitted speaker making it easy to add sound. Details: Pristine BR Lined Green Late Crest livery Running No. 45704 Named ‘Leviathan’ Etched Nameplates included Long Firebox Single Chimney Riveted Fowler 3,500-gallon Tender with Water Pick-Up Gear Smokebox Door with Large Numberplate AWS Equipment Features: SOUND FITTED – Fitted with a Zimo MS450P22 Plux22 DCC Sound Decoder Length 261mm (over couplings) Three pole motor mounted in the locomotive, driving the central set of driving wheels Electrical pickup from all driving wheels along with tender pickups Diecast metal chassis block (locomotive) Gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front bogie with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate Precision moulded boiler & firebox, cab, tender tank and tender chassis Separately fitted smokebox door which is mounted on hinges and can be posed open or closed Separately applied details including chimney, smokebox saddle, splashers, sandboxes, lubricators, water pick-up gear, reverser, lamp irons and smokebox door handles Individual metal detail components including handrails, handrail knobs, whistle, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator and reverser Hinged and posable metal fall plate between the locomotive and tender Sliding cab roof ventilator which can be posed open or closed Tender fitted with removable coal-effect load, with empty coal space modelled beneath Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in the tender of all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder pre-installed in SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Jubilee using recordings from real locomotives OO Scale  

Bachmann LMS Jubilee 45596 'Bahamas' BR Lined Green (Late)

LMS Jubilee w/Welded Tender 45596 'Bahamas' BR Lined Green (Late) The LMS Jubilee Class locomotive has long been a popular model in the Bachmann Branchline steam portfolio and for 2026 the Jubilee returns, better than ever before and with new tooling to allow models of the entire Class to be offered to modern standards for the first time. The Branchline model is constructed around a diecast metal running plate and employs precision moulded components like the boiler, firebox and cab which are then adorned with countless separate detailing parts like the metal handrails, turned brass safety valves and whistle, lamp irons, lubricators and sandboxes. With authentic pattern driving wheels and a detailed front bogie, the chassis is further enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. With a powerful three pole motor and a proven drive train, the Branchline Jubilee is surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Upgraded to include a firebox lighting system that works on both analogue and DCC, the DCC provision has also been enhanced and a Plux22 DCC decoder socket is now fitted in the tender along with a pre-fitted speaker making it easy to add sound. Details: Locomotive is Preserved Pristine BR Lined Green Late Crest livery Running No. 45596 Named ‘Bahamas’ Etched Nameplates included Short Firebox Double Chimney Welded Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate AWS Equipment Features: Equipped with a Plux22 DCC Decoder Socket – Recommend Decoder  item No. 36-570A Length 261mm (over couplings) Three pole motor mounted in the locomotive, driving the central set of driving wheels Electrical pickup from all driving wheels along with tender pickups Diecast metal chassis block (locomotive) Gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front bogie with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate Precision moulded boiler & firebox, cab, tender tank and tender chassis Separately fitted smokebox door which is mounted on hinges and can be posed open or closed Separately applied details including chimney, smokebox saddle, splashers, sandboxes, lubricators, water pick-up gear, reverser, lamp irons and smokebox door handles Individual metal detail components including handrails, handrail knobs, whistle, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator and reverser Hinged and posable metal fall plate between the locomotive and tender Sliding cab roof ventilator which can be posed open or closed Tender fitted with removable coal-effect load, with empty coal space modelled beneath Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in the tender of all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder pre-installed in SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Jubilee using recordings from real locomotives OO Scale

Bachmann LMS 5XP 'Patriot' 45524 'Blackpool' BR Lined Green (Early)

LMS 5XP 'Patriot' 45524 'Blackpool' BR Lined Green (Early) Add some LMS express power to your locomotive line up with the Bachmann Branchline LMS Patriot. The LMS built 52 of these locomotives for express passenger duties and named more than a dozen after the holiday resorts that it served. We’ve selected one of the most famous destinations of them all – Blackpool – as the subject for this Branchline OO scale model. Boasting a high level of detail, the Branchline Patriot is constructed with a diecast metal running plate paired with a precision moulded boiler, firebox and cab capturing the loco’s distinctive appearance, most notably the parallel boiler and Fowler-designed cab. Etched metal smoke deflectors are then added, along with countless separate detailing parts like the metal handrails, turned brass safety valves, lamp irons and lubricators. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. Moving to the tender and the locomotive to tender drawbar is adjustable to suit individual layout conditions, whilst electrical connections are incorporated into the drawbar and a poseable fallplate is fitted to the tender, which itself is another precision moulded part, with several separately applied details including the lamp irons, tank vents, coal rails and handwheels. A realistic coal load is included whilst the tender chassis sports brake rigging and water pick-up gear. Sprung metal buffers are fitted to both the front of the locomotive and the rear of the tender. Within the cab, a detailed boiler backhead is present and the pipework and controls are enhanced with individual decoration. The ventilator on the cab roof is a separate part, allowing it to be posed in the open or closed position, or somewhere in between. The high level of decoration is not reserved only for the cab interior of course, and the model boasts an authentic rendition of the BR Lined Green livery complete with full-colour early emblems. The beautifully crafted livery application is finished with precision printed details like the running number, shed code and builders plaques, whilst etched nameplates are supplied for user-fitting to complete the look of this express locomotive. With a powerful three pole motor and a proven drive train, the Branchline Patriot is a surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Meanwhile, DCC provision comes in the form of a 21 Pin decoder socket and it’s easy to fit a speaker if you’re adding sound. Detail: Pristine BR Lined Green Early Emblem livery Running No. 45524 Named ‘Blackpool’ Etched Nameplates included Riveted Fowler Tender Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 260mm (over couplings) - OO Scale

Bachmann LMS 5XP 'Patriot' 45524 'Blackpool' BR Lined Green (Early) (SF)

LMS 5XP 'Patriot' 45524 'Blackpool' BR Lined Green (Early) (Sound Fitted) Add some LMS express power to your locomotive line up with the Bachmann Branchline LMS Patriot. The LMS built 52 of these locomotives for express passenger duties and named more than a dozen after the holiday resorts that it served. We’ve selected one of the most famous destinations of them all – Blackpool – as the subject for this Branchline OO scale model. Boasting a high level of detail, the Branchline Patriot is constructed with a diecast metal running plate paired with a precision moulded boiler, firebox and cab capturing the loco’s distinctive appearance, most notably the parallel boiler and Fowler-designed cab. Etched metal smoke deflectors are then added, along with countless separate detailing parts like the metal handrails, turned brass safety valves, lamp irons and lubricators. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. Moving to the tender and the locomotive to tender drawbar is adjustable to suit individual layout conditions, whilst electrical connections are incorporated into the drawbar and a poseable fallplate is fitted to the tender, which itself is another precision moulded part, with several separately applied details including the lamp irons, tank vents, coal rails and handwheels. A realistic coal load is included whilst the tender chassis sports brake rigging and water pick-up gear. Sprung metal buffers are fitted to both the front of the locomotive and the rear of the tender. Within the cab, a detailed boiler backhead is present and the pipework and controls are enhanced with individual decoration. The ventilator on the cab roof is a separate part, allowing it to be posed in the open or closed position, or somewhere in between. The high level of decoration is not reserved only for the cab interior of course, and the model boasts an authentic rendition of the BR Lined Green livery complete with full-colour early emblems. The beautifully crafted livery application is finished with precision printed details like the running number, shed code and builders plaques, whilst etched nameplates are supplied for user-fitting to complete the look of this express locomotive. With a powerful three pole motor and a proven drive train, the Branchline Patriot is a surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Meanwhile, DCC provision comes in the form of a 21 Pin decoder socket and it’s easy to fit a speaker if you’re adding sound. Detail: Pristine BR Lined Green Early Emblem livery Running No. 45524 Named ‘Blackpool’ Etched Nameplates included Riveted Fowler Tender Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 260mm (over couplings) - OO Scale

Bachmann LMS 5XP 'Patriot' 5551 'The Unknown Warrior' LMS Crimson (SF)

LMS 5XP 'Patriot' 5551 'The Unknown Warrior' LMS Lined Crimson (Sound Fitted) Add some LMS express power to your locomotive line up with the Bachmann Branchline LMS Patriot. The LMS built 52 of these locomotives for express passenger duties but sadly none were preserved, however The LMS Patriot Project was launched in 2008 to build a replica Patriot Class locomotive to represent this long-lost class and create a national memorial engine, recognising the role that class leader No. 5500 performed for the LMS from 1937. Bachmann is proud to support The LMS Patriot Project and by producing this model of ‘the Unknown Warrior’ we will be helping towards the completion of its full size counterpart. Boasting a high level of detail, the Branchline Patriot is constructed with a diecast metal running plate paired with a precision moulded boiler, firebox and cab capturing the loco’s distinctive appearance, most notably the parallel boiler and Fowler-designed cab. Etched metal smoke deflectors are then added, along with countless separate detailing parts like the metal handrails, turned brass safety valves, lamp irons and lubricators. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. Moving to the tender and the locomotive to tender drawbar is adjustable to suit individual layout conditions, whilst electrical connections are incorporated into the drawbar and a poseable fallplate is fitted to the tender, which itself is another precision moulded part, with several separately applied details including the lamp irons, tank vents, coal rails and handwheels. A realistic coal load is included whilst the tender chassis sports brake rigging and water pick-up gear. Sprung metal buffers are fitted to both the front of the locomotive and the rear of the tender. Within the cab, a detailed boiler backhead is present and the pipework and controls are enhanced with individual decoration. The ventilator on the cab roof is a separate part, allowing it to be posed in the open or closed position, or somewhere in between. The high level of decoration is not reserved only for the cab interior of course, and the model boasts an authentic rendition of the BR Lined Green livery complete with full-colour early emblems. The beautifully crafted livery application is finished with precision printed details like the running number, shed code and builders plaques, whilst etched nameplates are supplied for user-fitting to complete the look of this express locomotive. With a powerful three pole motor and a proven drive train, the Branchline Patriot is a surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Meanwhile, DCC provision comes in the form of a 21 Pin decoder socket and it’s easy to fit a speaker if you’re adding sound. Detail: Pristine LMS Lined Crimson Lake livery Running No. 5551 Named ‘The Unknown Warrior’ Etched Nameplates included Riveted Fowler Tender Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 260mm (over couplings) - OO Scale  

Bachmann LMS 5XP 'Patriot' 5551 'The Unknown Warrior' LMS Lined Crimson

LMS 5XP 'Patriot' 5551 'The Unknown Warrior' LMS Lined Crimson Add some LMS express power to your locomotive line up with the Bachmann Branchline LMS Patriot. The LMS built 52 of these locomotives for express passenger duties but sadly none were preserved, however The LMS Patriot Project was launched in 2008 to build a replica Patriot Class locomotive to represent this long-lost class and create a national memorial engine, recognising the role that class leader No. 5500 performed for the LMS from 1937. Bachmann is proud to support The LMS Patriot Project and by producing this model of ‘the Unknown Warrior’ we will be helping towards the completion of its full size counterpart. Boasting a high level of detail, the Branchline Patriot is constructed with a diecast metal running plate paired with a precision moulded boiler, firebox and cab capturing the loco’s distinctive appearance, most notably the parallel boiler and Fowler-designed cab. Etched metal smoke deflectors are then added, along with countless separate detailing parts like the metal handrails, turned brass safety valves, lamp irons and lubricators. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. Moving to the tender and the locomotive to tender drawbar is adjustable to suit individual layout conditions, whilst electrical connections are incorporated into the drawbar and a poseable fallplate is fitted to the tender, which itself is another precision moulded part, with several separately applied details including the lamp irons, tank vents, coal rails and handwheels. A realistic coal load is included whilst the tender chassis sports brake rigging and water pick-up gear. Sprung metal buffers are fitted to both the front of the locomotive and the rear of the tender. Within the cab, a detailed boiler backhead is present and the pipework and controls are enhanced with individual decoration. The ventilator on the cab roof is a separate part, allowing it to be posed in the open or closed position, or somewhere in between. The high level of decoration is not reserved only for the cab interior of course, and the model boasts an authentic rendition of the BR Lined Green livery complete with full-colour early emblems. The beautifully crafted livery application is finished with precision printed details like the running number, shed code and builders plaques, whilst etched nameplates are supplied for user-fitting to complete the look of this express locomotive. With a powerful three pole motor and a proven drive train, the Branchline Patriot is a surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Meanwhile, DCC provision comes in the form of a 21 Pin decoder socket and it’s easy to fit a speaker if you’re adding sound. Detail: Pristine LMS Lined Crimson Lake livery Running No. 5551 Named ‘The Unknown Warrior’ Etched Nameplates included Riveted Fowler Tender Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 260mm (over couplings) - OO Scale  

Bachmann GCR 9J (J11) 64305 BR Black (Early Emblem)

GCR 9J (J11) 64305 BR Black (Early Emblem) The Great Central Railway was a big mover of goods and amongst the locomotives it built for this purpose were the 9J 0-6-0s. Upon becoming part of the LNER in 1924 the 9Js were reclassified as J11s and this designation stayed remained into British Railways life and until withdrawal. Nicknamed ‘Pom Poms’ because their exhaust noise sounded very similar to the guns of the same name, these freight workhorses are replicated in OO scale by Bachmann Branchline. The J11s carried all the hallmarks of a locomotive designed by the GCR’s Chief Mechanical Engineer John G. Robinson and these features are replicated on the Branchline model using a precision moulded boiler, smokebox and firebox mounted on a diecast metal running plate. The distinctive Robinson cab is another high-fidelity moulding, within which boiler backhead is replicated using an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. The GCR tender has a distinctive look too with its high capacity and flared top edges, and again these trademark features are captured in miniature using high-fidelity mouldings. Coupling to the locomotive via a drawbar that is adjustable to suit individual layout conditions, electrical connections are integrated into it and a hinged fallplate is also fitted to the tender. Across the model separate components are added, from the metal handrails and sprung metal buffers, to the lamp irons at the front and rear, to complete the look of this freight machine. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. The black colour scheme is replicated with the usual care and attention that you expect from Bachmann Branchline, resulting in a paint finish that is rich and consistent throughout. Details like the running number, plates and plaques are then added using precision printing techniques for full authenticity. The Branchline J11 runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine BR Black Early Emblem livery Running No. 64305 Riveted Smokebox Door with Twin Handwheels, Numberplate and Lamp Iron mounted on the Smokebox Door LNER ‘Plantpot’ Chimney Snifter Valve LNER lowered Dome Ross Pop Safety Valves Parallel Buffer Shanks with End Collars Wakefield Lubricator (fitted to the left hand side) Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 220mm (over couplings) - OO Scale

Bachmann GCR 9J (J11) 64305 BR Black (Early Emblem) (Sound Fitted)

GCR 9J (J11) 64305 BR Black (Early Emblem) (Sound Fitted) The Great Central Railway was a big mover of goods and amongst the locomotives it built for this purpose were the 9J 0-6-0s. Upon becoming part of the LNER in 1924 the 9Js were reclassified as J11s and this designation stayed remained into British Railways life and until withdrawal. Nicknamed ‘Pom Poms’ because their exhaust noise sounded very similar to the guns of the same name, these freight workhorses are replicated in OO scale by Bachmann Branchline. The J11s carried all the hallmarks of a locomotive designed by the GCR’s Chief Mechanical Engineer John G. Robinson and these features are replicated on the Branchline model using a precision moulded boiler, smokebox and firebox mounted on a diecast metal running plate. The distinctive Robinson cab is another high-fidelity moulding, within which boiler backhead is replicated using an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. The GCR tender has a distinctive look too with its high capacity and flared top edges, and again these trademark features are captured in miniature using high-fidelity mouldings. Coupling to the locomotive via a drawbar that is adjustable to suit individual layout conditions, electrical connections are integrated into it and a hinged fallplate is also fitted to the tender. Across the model separate components are added, from the metal handrails and sprung metal buffers, to the lamp irons at the front and rear, to complete the look of this freight machine. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. The black colour scheme is replicated with the usual care and attention that you expect from Bachmann Branchline, resulting in a paint finish that is rich and consistent throughout. Details like the running number, plates and plaques are then added using precision printing techniques for full authenticity. The Branchline J11 runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine BR Black Early Emblem livery Running No. 64305 Riveted Smokebox Door with Twin Handwheels, Numberplate and Lamp Iron mounted on the Smokebox Door LNER ‘Plantpot’ Chimney Snifter Valve LNER lowered Dome Ross Pop Safety Valves Parallel Buffer Shanks with End Collars Wakefield Lubricator (fitted to the left hand side) Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 220mm (over couplings) - OO Scale

Bachmann GCR 9J 295 GCR Lined Black (Sound Fitted)

GCR 9J 295 GCR Lined Black (Sound Fitted) The Great Central Railway was a big mover of goods and amongst the locomotives it built for this purpose were the 9J 0-6-0s. Nicknamed ‘Pom Poms’ because their exhaust noise sounded very similar to the guns of the same name, these freight workhorses are replicated in OO scale by Bachmann Branchline. The 9Js carried all the hallmarks of a locomotive designed by the GCR’s Chief Mechanical Engineer John G. Robinson and these features are replicated on the Branchline model using a precision moulded boiler, smokebox and firebox mounted on a diecast metal running plate. The distinctive Robinson cab is another high-fidelity moulding, within which boiler backhead is replicated using an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. The GCR tender has a distinctive look too with its high capacity and flared top edges, and again these trademark features are captured in miniature using high-fidelity mouldings. Coupling to the locomotive via a drawbar that is adjustable to suit individual layout conditions, electrical connections are integrated into it and a hinged fallplate is also fitted to the tender. Across the model separate components are added, from the metal handrails and sprung metal buffers, to the lamp irons at the front and rear, to complete the look of this freight machine. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. The black colour scheme with its ornate three-colour lining is reproduced to exquisite effect, with a rich and consistent finish throughout. The Great Central lettering and company crest on the tender is the icing on the cake, comprising no fewer than six separate colours and replicated using precision printing techniques for full authenticity. The Branchline 9J runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine Great Central Railway Lined Black livery Running No. 295 Smooth Smokebox Door with original Handwheel Top Front Lamp Iron mounted above the Smokebox Door Robinson Tapered Chimney Draught Retarder Original Tall Dome Ramsbottom Safety Valves Parallel Buffer Shanks with End Collars Central Rib on Cab Roof Tender fitted with Water Pick-Up Gear Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 220mm (over couplings) - OO Scale

EFE Rail Class 23 'Baby Deltic' Headcode Box D5901 BR Green (SYP) (N)

Class 23 'Baby Deltic' H/code Box D5901 BR Green (SYP) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: With TOPS panel applied before moving to the Railway Technical Centre Pristine BR Green (Small Yellow Panels) livery Running No. D5901 Centre Headcode Panels Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Headcode Box D5903 BR Green (FYE) (N)

Class 23 'Baby Deltic' Headcode Box D5903 BR Green (FYE) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green (Full Yellow Ends) livery Running No. D5903 Centre Headcode Panels Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Headcode Box D5905 BR Green (SYP) (N)

Class 23 'Baby Deltic' H/code Box D5905 BR Green (SYP) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green (Small Yellow Panels) livery Running No. D5905 Centre Headcode Panels Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Headcode Box D5908 BR Green (FYE) (N)

Class 23 'Baby Deltic' Headcode Box D5908 BR Green (FYE) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green (Full Yellow Ends) livery Running No. D5908 Centre Headcode Panels Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Headcode Box D5909 BR Blue (N)

Class 23 'Baby Deltic' Headcode Box D5909 BR Blue Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Blue livery Running No. D5909 Centre Headcode Panels Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Disc Headcode D5902 BR Green (Late) (N)

Class 23 'Baby Deltic' Disc Headcode D5902 BR Green (Late) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green Late Crest livery Running No. D5902 Disc Headcodes Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Disc Headcode D5906 BR Green (Late) (N)

Class 23 'Baby Deltic' Disc Headcode D5906 BR Green (Late) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green Late Crest livery Running No. D5906 Disc Headcodes Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Disc Headcode D5907 BR Green (Late) (N)

Class 23 'Baby Deltic' Disc Headcode D5907 BR Green (Late) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green Late Crest livery Running No. D5907 Disc Headcodes Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Disc Headcode D5909 BR Green (Late) (N)

Class 23 'Baby Deltic' Disc Headcode D5909 BR Green (Late) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green Late Crest livery Running No. D5909 Disc Headcodes Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Headcode Box D5900 BR Green (SYP) (N)

Class 23 'Baby Deltic' H/code Box D5900 BR Green (SYP) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green (Small Yellow Panels) livery Running No. D5900 Centre Headcode Panels Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

Graham Farish Class 101 2-Car 'Power Twin' DMU BR Green (Sound Fitted) (N)

Class 101 2-Car 'Power Twin' DMU BR Green (Speed Whiskers) (Sound Fitted) The Class 101 Diesel Multiple Units were the most numerous of all the first generation DMUs and had a long service life, remaining in use for almost half a century, and we’re delighted to present N Scale models of this iconic unit as part of the Graham Farish range. This two-car unit depicts a ‘Power Twin’ comprising two vehicles equipped with an engine and the associated transmission and whilst all of these details are replicated faithfully on the Graham Farish model, just one of the vehicles is motorised. Each of the two cars is constructed from precision moulded bodyshells with flush glazing and a high level of raised and engraved detailing, from the ventilators and rivets found on the roof to the door furniture and window frames along each bodyside. Each chassis is adorned with all the underframe components you’d see on the prototype, including the engine, transmission, battery boxes and auxiliary gear. Both vehicles are brought to life with an exquisite livery application, using accurate colours, fonts and logos, and the detail and decoration extends to the interior too, where seating is fitted and painted accordingly, and the cab provides crew seats along with a representation of the control desk. The bogies are moulded with a high level of relief detail and separate footsteps are added where appropriate, meanwhile metal wheelsets are employed and electrical pickups from every wheel provide power for the directional lights at each cab end. The motorised vehicle is fitted with a powerful three pole motor with flywheel and both cars have a 6 pin DCC decoder socket; in the trailer a function decoder can be used to work the directional lights whereas the powered vehicle has a pre-fitted speaker so a sound decoder could be fitted to add sound to the model Details: Pristine BR Green livery with Speed Whiskers 2-Car Unit comprising DMBS No. E51427 and DMCL No. E51497 Destination Blinds for Bradford and Doncaster Headcode B6 displayed at both ends Features: Accessory Pack NEM Coupling Pockets Powerful 3 Pole Motor with Flywheel Interior Detailing Directional Lighting Speaker Fitted Equipped with two 6 Pin DCC Decoder Sockets – recommended Decoder 2 x item No. 36-568A Length 262mm (over couplings) - N Scale

Graham Farish Class 101 2-Car 'Power Twin' DMU BR Green (Speed Whiskers) (N)

Class 101 2-Car 'Power Twin' DMU BR Green (Speed Whiskers) The Class 101 Diesel Multiple Units were the most numerous of all the first generation DMUs and had a long service life, remaining in use for almost half a century, and we’re delighted to present N Scale models of this iconic unit as part of the Graham Farish range. This two-car unit depicts a ‘Power Twin’ comprising two vehicles equipped with an engine and the associated transmission and whilst all of these details are replicated faithfully on the Graham Farish model, just one of the vehicles is motorised. Each of the two cars is constructed from precision moulded bodyshells with flush glazing and a high level of raised and engraved detailing, from the ventilators and rivets found on the roof to the door furniture and window frames along each bodyside. Each chassis is adorned with all the underframe components you’d see on the prototype, including the engine, transmission, battery boxes and auxiliary gear. Both vehicles are brought to life with an exquisite livery application, using accurate colours, fonts and logos, and the detail and decoration extends to the interior too, where seating is fitted and painted accordingly, and the cab provides crew seats along with a representation of the control desk. The bogies are moulded with a high level of relief detail and separate footsteps are added where appropriate, meanwhile metal wheelsets are employed and electrical pickups from every wheel provide power for the directional lights at each cab end. The motorised vehicle is fitted with a powerful three pole motor with flywheel and both cars have a 6 pin DCC decoder socket; in the trailer a function decoder can be used to work the directional lights whereas the powered vehicle has a pre-fitted speaker so a sound decoder could be fitted to add sound to the model Details: Pristine BR Green livery with Speed Whiskers 2-Car Unit comprising DMBS No. E51427 and DMCL No. E51497 Destination Blinds for Bradford and Doncaster Headcode B6 displayed at both ends Features: Accessory Pack NEM Coupling Pockets Powerful 3 Pole Motor with Flywheel Interior Detailing Directional Lighting Speaker Fitted Equipped with two 6 Pin DCC Decoder Sockets – recommended Decoder 2 x item No. 36-568A Length 262mm (over couplings) - N Scale

Graham Farish Class 101 2-Car DMU BR Blue (N)

Class 101 2-Car DMU BR Blue The Class 101 Diesel Multiple Units were the most numerous of all the first generation DMUs and had a long service life, remaining in use for almost half a century, and we’re delighted to present N Scale models of this iconic unit as part of the Graham Farish range. This two-car unit depicts a Class 101 in BR Blue livery operating in North East England and is typical of much of the fleet during the British Rail era. Each of the two cars is constructed from precision moulded bodyshells with flush glazing and a high level of raised and engraved detailing, from the ventilators and rivets found on the roof to the door furniture and window frames along each bodyside. Each chassis is adorned with all the underframe components you’d see on the prototype, including the engine, transmission, battery boxes and auxiliary gear. Both vehicles are brought to life with an exquisite livery application, using accurate colours, fonts and logos, and the detail and decoration extends to the interior too, where seating is fitted and painted accordingly, and the cab provides crew seats along with a representation of the control desk. The bogies are moulded with a high level of relief detail and separate footsteps are added where appropriate, meanwhile metal wheelsets are employed and electrical pickups from every wheel provide power for the directional lights at each cab end. The motorised vehicle is fitted with a powerful three pole motor with flywheel and both cars have a 6 pin DCC decoder socket; in the trailer a function decoder can be used to work the directional lights whereas the powered vehicle has a pre-fitted speaker so a sound decoder could be fitted to add sound to the model Details: Pristine BR Blue livery 2-Car Unit comprising DMBS No. E50166 and DTCL No. E56051 Destination Blinds for Hartlepool and Darlington Features: Accessory Pack NEM Coupling Pockets Powerful 3 Pole Motor with Flywheel Interior Detailing Directional Lighting Speaker Fitted Equipped with two 6 Pin DCC Decoder Sockets – recommended Decoder 2 x item No. 36-568A Length 262mm (over couplings) - N Scale

Graham Farish Class 101 2-Car DMU BR Regional Railways (N)

Class 101 2-Car DMU BR Regional Railways The Class 101 Diesel Multiple Units were the most numerous of all the first generation DMUs and had a long service life, remaining in use for almost half a century, and we’re delighted to present N Scale models of this iconic unit as part of the Graham Farish range. This two-car unit depicts a Class 101 in later life and having received a few modifications from its original condition, like the fitting of high intensity headlights and the addition of bodyside heater louvres. Each of the two cars is constructed from precision moulded bodyshells with flush glazing and a high level of raised and engraved detailing, from the ventilators and rivets found on the roof to the door furniture and window frames along each bodyside. Each chassis is adorned with all the underframe components you’d see on the prototype, including the engine, transmission, battery boxes and auxiliary gear. Both vehicles are brought to life with an exquisite livery application, using accurate colours, fonts and logos, and the detail and decoration extends to the interior too, where seating is fitted and painted accordingly, and the cab provides crew seats along with a representation of the control desk. The bogies are moulded with a high level of relief detail and separate footsteps are added where appropriate, meanwhile metal wheelsets are employed and electrical pickups from every wheel provide power for the directional lights at each cab end. The motorised vehicle is fitted with a powerful three pole motor with flywheel and both cars have a 6 pin DCC decoder socket; in the trailer a function decoder can be used to work the directional lights whereas the powered vehicle has a pre-fitted speaker so a sound decoder could be fitted to add sound to the model Details: Pristine BR Regional Railways livery Set No. 101660 2-Car Unit comprising DMBS No. 51189 and DTSL No. 54343 Destination Blinds for Sheffield and Manchester Piccadilly Features: Accessory Pack NEM Coupling Pockets Powerful 3 Pole Motor with Flywheel Interior Detailing Directional Lighting Speaker Fitted Equipped with two 6 Pin DCC Decoder Sockets – recommended Decoder 2 x item No. 36-568A Length 262mm (over couplings) - N Scale

Graham Farish Class 101 2-Car DMU BR Regional Railways (Sound Fitted) (N)

Class 101 2-Car DMU BR Regional Railways (Sound Fitted) The Class 101 Diesel Multiple Units were the most numerous of all the first generation DMUs and had a long service life, remaining in use for almost half a century, and we’re delighted to present N Scale models of this iconic unit as part of the Graham Farish range. This two-car unit depicts a Class 101 in later life and having received a few modifications from its original condition, like the fitting of high intensity headlights and the addition of bodyside heater louvres. Each of the two cars is constructed from precision moulded bodyshells with flush glazing and a high level of raised and engraved detailing, from the ventilators and rivets found on the roof to the door furniture and window frames along each bodyside. Each chassis is adorned with all the underframe components you’d see on the prototype, including the engine, transmission, battery boxes and auxiliary gear. Both vehicles are brought to life with an exquisite livery application, using accurate colours, fonts and logos, and the detail and decoration extends to the interior too, where seating is fitted and painted accordingly, and the cab provides crew seats along with a representation of the control desk. The bogies are moulded with a high level of relief detail and separate footsteps are added where appropriate, meanwhile metal wheelsets are employed and electrical pickups from every wheel provide power for the directional lights at each cab end. The motorised vehicle is fitted with a powerful three pole motor with flywheel and both cars have a 6 pin DCC decoder socket; in the trailer a function decoder can be used to work the directional lights whereas the powered vehicle has a pre-fitted speaker so a sound decoder could be fitted to add sound to the model Details: Pristine BR Regional Railways livery Set No. 101660 2-Car Unit comprising DMBS No. 51189 and DTSL No. 54343 Destination Blinds for Sheffield and Manchester Piccadilly Features: Accessory Pack NEM Coupling Pockets Powerful 3 Pole Motor with Flywheel Interior Detailing Directional Lighting Speaker Fitted Equipped with two 6 Pin DCC Decoder Sockets – recommended Decoder 2 x item No. 36-568A Length 262mm (over couplings) - N Scale

Hornby Railroad: BR Class 60 60038 'Avesta Polarit' EWS (Sound Fitted)

Railroad: BR Class 60 60038 'Avesta Polarit' EWS (Sound Fitted) A growth in demand in the heavy haulage sector led to a review of BR’s available motive power in the 1980s. With 185 locomotives of the Type 5, 3,000+ horsepower category available, made up of its Classes 56 and 58, it was clear that more would be needed, and BR put out an invitation to tender for new locomotives in 1987.  The 100 locomotive order was awarded to Brush in Loughborough, and these entered service between 1989 and 1993. No.60038 was named ‘Bidean nam Bian’ after the Scottish ‘Munro’ in Glen Coe.  With BR’s trainload freight business broken up into shadow franchises, the locomotive became part of Loadhaul, based in the north-east. By 1996, this had become part of EWS and 60038 was named 'Avesta Polarit' after the steel making company at the DFDS Immingham sea terminal on 19th March 2002. It is now one of 14 owned by DC Rail and currently in store.  Our detailed RailRoad replica Class 60 model retains all the charm of the original, with enhanced durability and pre-fitted DCC sound features. Product features: Design based on extensive research and original drawings HM7000-21 Pin decoder compatible Space for a additional R7408 Enhanced Bass Speaker Working directional lights All wheel electrical pickup NEM couplings Brass axle bearings Separately fitted handrails, horns and exhaust - DCC HM7000 TXS Sound Fitted - OO Scale

Hornby Railroad: BR Class 60 60039 'Dove Holes' DB Cargo

Railroad: BR Class 60 60039 'Dove Holes' DB Cargo  Entering service at Cardiff Canton in 1991, 60039 was originally named ‘Glastonbury Tor’ as part of the hills and peaks theme of the initial Class 60 naming convention.  It was later one of the locomotives selected for the ‘Super 60’ upgrade programme announced by DBS/DB Cargo in November 2010 that was designed to extend their working life by a further 15 years. No.60039 was named ‘Dove Holes’ in April 2015 and was used on limestone traffic out of Derbyshire. It is still owned by DB Cargo and is one of 52 members of the class put into storage by the company.  We've recreated this impressive locomotive in RailRoad form, bringing the most important details to life and adding features to enhance durability, making this the perfect model for regular layout use. Product features: Design based on extensive research and original drawings HM7000-21 Pin decoder compatible Space for a additional R7408 Enhanced Bass Speaker Working directional lights All wheel electrical pickup NEM couplings Brass axle bearings Separately fitted handrails, horns and exhaust - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: BR Class 60 60039 'Dove Holes' DB Cargo (Sound Fitted)

Railroad: BR Class 60 60039 'Dove Holes' DB Cargo (Sound Fitted)  Entering service at Cardiff Canton in 1991, 60039 was originally named ‘Glastonbury Tor’ as part of the hills and peaks theme of the initial Class 60 naming convention.  It was later one of the locomotives selected for the ‘Super 60’ upgrade programme announced by DBS/DB Cargo in November 2010 that was designed to extend their working life by a further 15 years. No.60039 was named ‘Dove Holes’ in April 2015 and was used on limestone traffic out of Derbyshire. It is still owned by DB Cargo and is one of 52 members of the class put into storage by the company.  We've recreated this impressive locomotive in RailRoad form, bringing the most important details to life and adding features to enhance durability, making this the perfect model for regular layout use. We've even included a pre-fitted sound chip so you can play authentic railway sounds as the model moves around your layout. Product features: Design based on extensive research and original drawings HM7000-21 Pin decoder compatible Space for a additional R7408 Enhanced Bass Speaker Working directional lights All wheel electrical pickup NEM couplings Brass axle bearings Separately fitted handrails, horns and exhaust - DCC HM7000 TXS Sound Fitted - OO Scale

Hornby Railroad: BR Class 60 60069 'Humphrey Davy' (Sound Fitted)

Railroad: BR Class 60 60069 'Humphrey Davy' Coal Sector (Sound Fitted)  The Class 60s were the last heavy haulers built for BR. No.60069 was allocated to BR’s Train Load Freight (TLF) Coal Sector and named ‘Humphrey Davy’, in honour of the inventor of the miner’s safety lamp.  Following the break-up of TLF, the Class 60s were divided between three of the shadow franchises: Mainline Freight, Loadhaul, and Transrail Freight, but not long after they were formed they were absorbed into English, Welsh & Scottish (EWS). By 2007, it was estimated that the operational fleet was down to just 60 locomotives, the rest either in store or undergoing repair. That year, EWS was acquired by DB Schenker, a wholly-owned subsidiary of German railway company, Deutche Bahn.  Our RailRoad Class 60 model represents 'Humphrey Davy' in detail, but with added features that make for a much more durable locomotive. Plus, it is pre-fitted with a DCC sound chip for the most authentic model railway experience. Product features: Design based on extensive research and original drawings HM7000-21 Pin decoder compatible Space for a additional R7408 Enhanced Bass Speaker Working directional lights All wheel electrical pickup NEM couplings Brass axle bearings Separately fitted handrails, horns and exhaust - DCC HM7000 TXS Sound Fitted - OO Scale

Hornby Railroad: BR Class 60 60069 'Humphrey Davy' Coal Sector

Railroad: BR Class 60 60069 'Humphrey Davy' Coal Sector The Class 60s were the last heavy haulers built for BR. No.60069 was allocated to BR’s Train Load Freight (TLF) Coal Sector and named ‘Humphrey Davy’, in honour of the inventor of the miner’s safety lamp.  Following the break-up of TLF, the Class 60s were divided between three of the shadow franchises: Mainline Freight, Loadhaul and Transrail Freight, but not long after they were formed they were absorbed into English, Welsh & Scottish (EWS). By 2007, it was estimated that the operational fleet was down to just 60 locomotives, the rest either in store or undergoing repair. That year, EWS was acquired by DB Schenker, a wholly-owned subsidiary of German railway company, Deutche Bahn.  Our RailRoad Class 60 model represents 'Humphrey Davy' in detail, but with added features that make for a much more durable locomotive. Product features: Design based on extensive research and original drawings HM7000-21 Pin decoder compatible Space for a additional R7408 Enhanced Bass Speaker Working directional lights All wheel electrical pickup NEM couplings Brass axle bearings Separately fitted handrails, horns and exhaust - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: BR Class 60 60038 'Avesta Polarit' EWS

Railroad: BR Class 60 60038 'Avesta Polarit' EWS  A growth in demand in the heavy haulage sector led to a review of BR’s available motive power in the 1980s.  With 185 locomotives of the Type 5, 3,000+ horsepower category available, made up of its Classes 56 and 58, it was clear that more would be needed, and BR put out an invitation to tender for new locomotives in 1987. The 100 locomotive order was awarded to Brush in Loughborough, and these entered service between 1989 and 1993. No.60038 was named ‘Bidean nam Bian’ after the Scottish ‘Munro’ in Glen Coe.  With BR’s trainload freight business broken up into shadow franchises, the locomotive became part of Loadhaul, based in the north-east. By 1996, this had become part of EWS and 60038 was named 'Avesta Polarit' after the steel making company, at the DFDS Immingham sea terminal on 19th March 2002. It is now one of 14 owned by DC Rail and currently in store.  Our RailRoad model is an accurate replica of this Class 60 locomotive, with high detail and design features for enhanced durability. Product features: Design based on extensive research and original drawings HM7000-21 Pin decoder compatible Space for a additional R7408 Enhanced Bass Speaker Working directional lights All wheel electrical pickup NEM couplings Brass axle bearings Separately fitted handrails, horns and exhaust - DCC Ready 21-Pin Socket - OO Scale

Hornby Class 802/3 802301 'Amy Johnson' Hull Trains Pack

Class 802/3 802301 'Amy Johnson' Hull Trains Pack  In 2019, Hull Trains launched a poll to find suggestions for naming its five Class 802-3 ‘Paragon’ trains.  As a result, set 802301 was named ‘Amy Johnson’ after the Hull-born pioneering pilot who became the first woman to fly solo between London and Australia in the 1930s, setting many long-distance flying records. This unit was the first of Hull Trains’ Class 802-3 bi-mode units, entering service on 25th November 2019. The five 5-car sets work express services between Hull and London King’s Cross. Our OO model Train Pack is a fantastic replica of this modern design, with HM7000 capability if you add a 21-pin decoder (sold separately). - DCC Ready 21-Pin Socket - OO Scale

Hornby LNER Flying Scotsman & GWR Pendennis Castle (Australian Tour)

LNER Flying Scotsman & GWR Pendennis Castle (Australian Tour) Train Pack  In 1988, Australia celebrated its bicentenary and, to mark the occasion, the world-famous ‘Flying Scotsman’ was invited to travel from Britain to take part in a series of railtours that were part of the ‘Aus Steam 88’ Festival, arriving in October that year.  Already resident in Western Australia since 1977, in the care of the Pilbara Railway Historical Society, former GWR ‘Castle’ Class 4-6-0 ‘Pendennis Castle’ was moved by road to Perth in early 1989 to operate alongside its one-time rival ‘A3’ Class ‘Pacific’. This unlikely reunion occurred almost 9,000 miles from where a week-long locomotive exchange once took place between the LNER and GWR, in April 1925.  This LNER and GWR Train Pack celebrates that landmark event in Australia 37 years ago in 1989. Featuring OO gauge locomotive model replicas of 'Flying Scotsman' and 'Pendennis Castle', these highly detailed designs include sprung metal buffers and NEM tension lock couplings for smooth rake creation. Add a 21-pin decoder to upgrade to HM7000 control. - DCC Ready 21-Pin Socket - OO Scale

Hornby Dublo: English Electric DP1 'Deltic' NRM Preserved

Hornby Dublo: English Electric DP1 'Deltic' NRM Preserved The BR English Electric DP1 'Deltic' is always a favourite model, and with its new blue livery, this OO gauge diesel engine is sure to be just as popular. This version features sprung metal buffers, NEM tension lock couplings and a coreless motor. It is also DCC-ready with a 21-pin socket for easy HM7000 conversion. Features include: High detail OO gauge model based on extensive research Presented as on display in Locomotion, Shildon, with grey chassis, steps and buffers; and horns removed Heavy, fully die-cast chassis and body Highly detailed cab interior Decorated driver controls with illuminated instrument dials Directional head and tail lighting Optional working Mars lights Working cab lights Engine bay lighting Physical switches on blanking plug to control the various lighting configurations Magnetic roof cover to access 21-Pin DCC socket Dual working roof fans, with manually adjustable speed controls Separately fitted etched window frames Large, powerful coreless motor with two flywheels for smooth running Dual bogie drive Sprung metal buffers Front and rear NEM coupling pocket Additional lamps supplied in the accessory bag Hand painted driver figures Supplied with 8 finely decorated etchings, including Locomotion headboard Decorated engine bay featuring printed ‘Napier Deltic’ plates Pre-fitted with a sugar cube speaker for easy digital conversion Space inside for HM7000 Enhanced Bass Speaker Space inside fuel tank for HM7070 - Power Bank Flange squeal sensor mounted in the bogies automatically detects when it is going round a curve to play flange squeal sounds dependant on speed. (Feature available once product is fitted with a HM7000 decoder) Fitted to display plinth with etched presentation plate Fully compatible with Hornby HM7000 app control system, with meticulously crafted Deltic sound profile (SD049) available for download. - DCC Ready 21-Pin Socket - OO Scale

Hornby Stainer 5MT 'Black 5' 45473 BR Lined Black (Sound/Smoke Fitted)

Stainer 5MT 'Black 5' 45473 BR Lined Black (Sound/Smoke Fitted) The latest addition to our fleet of LMS Class 5MT model locomotives features our innovative steam generator technology. This highly detailed OO gauge model sends out burst of steam in time with the movement of the wheels for the most realistic running. Fitted with HM7000, it also includes sound and control from your mobile device. With sprung metal buffers and NEM tension lock couplings, this is an impressive locomotive for your model railway layout. History The Wiiliam Stanier-designed Class 5 was introduced in 1934 onto the LMS and by the time the last was built in 1951, the class was 842-strong. No. 45473 was completed at Derby in May 1943, entering service as 5473 and spending much of its working life in Scotland, being part of Perth’s allocation at the time of Nationalisation in 1948 and finishing its career at Dundee Tay Bridge. From there, it was withdrawn in November 1966 and subsequently scrapped at W.H. Arnott, Young at Co. Ltd, Carmyle, Glasgow the following February. Specific to R30475SS Running number 45473 BR Mixed Traffic livery Matt smokebox and cab roof finish. 5MT long wheelbase configuration. Flickering firebox. Fluted die-cast connecting rods. Walschaerts valve gear. Parallel buffer stocks. Common Class 5MT features High detail OO gauge model based on extensive research and original works drawings. Pre-fitted 21-pin HM7000 decoder and speaker. The decoder compatible with NMRA DCC controllers, HM7000 APP control and has the Merchant Navy sound profile pre-installed for accurate locomotive sounds, synchronised with the chuff rate. Pre-fitted Gen 2 steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Die-cast chassis and running plate. Model weight is 360 grams. High detail cab and fully decorated backhead with decorated instrument dials. HM7000 Power Bank compatible. Powerful 5 pole skew wound motor. Illuminated flickering firebox. Illuminated head lamps and tail lamps (can be controlled using a DCC Decoder). Quick release locomotive to tender connector. Pogo pin wheel pickup arrangement for easy pickup servicing. Electrical pickups on main drive wheels and tender wheels. Die-cast connecting rods and valve gear. Prototypical size metal handrails with brass stanchions. Brass main drive bearings. Opening cab roof vent. Adjustable cab doors. Sprung metal buffers. Front and rear NEM coupling pocket. Accessory bag contains tablet catcher, vacuum pipes, lamps and couplings. Separately fitted lamps. Lamp code can be changed. Separately fitted simulated coal load. - DCC HM7000 TXS Sound Fitted w/ Smoke - OO Scale

Hornby Stanier 5MT 'Black 5' 45055 BR Lined Black (Early)

Stanier 5MT 'Black 5' 45055 BR Lined Black (Early)  Completed in November 1935, this ‘Black Five’ was built at Vulcan Foundry, near Newton-le-Willows in Lancashire.  It spent most of its working career in north-west England and North Wales, though in 1966 it had brief allocations at West Hartlepool and York, before moving back to the Liverpool area and serving at Bank Hall and then Aintree. It almost lasted to the end of steam, withdrawal coming a month shy on 6th July 1968 from Lostock Hall, Preston, with scrapping the following February.  This OO gauge locomotive model features sprung metal buffers and NEM tension lock couplings, and can be upgraded to HM7000 control with a 21-pin decoder (sold separately). Details: Running number 45055 BR Mixed Traffic livery Matt smokebox and cab roof finish 5MT long wheelbase configuration Flickering firebox Fluted die-cast connecting rods Walschaerts valve gear Parallel buffer stocks Features: High detail OO gauge model based on extensive research and original works drawings Die-cast chassis and running plate. Model weight is 360 grams High detail cab and fully decorated backhead with decorated instrument dials HM7000 21-Pin Decoder socket HM7000 Power Bank compatible Powerful 5 pole skew wound motor Illuminated flickering firebox Illuminated head lamps and tail lamps (can be controlled using a DCC Decoder) Quick release locomotive to tender connector Pogo pin wheel pickup arrangement for easy pickup servicing Electrical pickups on main drive wheels and tender wheels Die-cast connecting rods and valve gear Prototypical size metal handrails with brass stanchions Brass main drive bearings Opening cab roof vent Adjustable cab doors Sprung metal buffers Front and Rear NEM coupling pocket Accessory bag contains tablet catcher, vacuum pipes, lamps and couplings Separately fitted lamps. Lamp code can be changed. Separately fitted simulated coal load. - OO Scale

Hornby LNER K1 2005 LNER Apple Green (Preserved)

LNER K1 2005 LNER Apple Green (Preserved) The LNER K1 Class is a must-have addition to your steam model railway. With sprung metal buffers and NEM tension lock couplings, you can upgrade to DCC control by adding a 21-pin decoder (sold seperately).  The ‘K1s’ were useful and versatile engines, working extensively across former LNER territory, but were mostly associated with north-east England and also the West Highland Line to Fort William and Mallaig.  No. 62005 was the final member of the 70-strong class to remain in service, being withdrawn from Leeds Holbeck in December 1967. Though it survives today in preservation, it was initially acquired as a source of spares for already-preserved ‘K4’ 3442. However, in 1972 it was donated to the North Eastern Locomotive Preservation Group and based at the North Yorkshire Moors Railway, where it was restored in its own right, returning to steam in 1975. - DCC Ready 21-Pin Socket - OO Scale

Hornby LNER K1 62046 BR Lined Black (Early)

LNER K1 62046 BR Lined Black (Early) Add a BR (Early) K1 Class locomotive to your model railway layout today. This stylish OO steam engine features sprung metal buffers and NEM tension lock couplings, and you can upgrade to DCC control by adding a 21 pin decoder (sold seperately).  Built in 1949/50, after the formation of BR in 1948, but to an LNER design that was instigated by Edward Thompson, with the conversion of a three-cylinder ‘K4’ at Darlington in 1945, the two-cylinder ‘K1s’ were much modified by Thompson’s successor as Chief Mechanical Engineer, Arthur H Peppercorn. No.62046 emerged from the North British Locomotive Works in Glasgow in October 1949 and was first allocated to Darlington shed. After a reallocation to York (North) in June 1956, the locomotive ended its career there in February 1967 and was scrapped by Hughes Bolckow at Blyth during April. - DCC Ready 21-Pin Socket - OO Scale

Hornby LNER A4 4468 'Mallard' LNER Garter Blue (Sound/Smoke Fitted)

LNER A4 4468 'Mallard' LNER Garter Blue (Sound/Smoke Fitted) One of the most famous of all steam locomotives, ‘Mallard’ still holds the world speed record for steam. In July 1938, it reached 126mph on Stoke Bank. Entering service in March of that year in LNER Garter blue, it had full side valances and red wheels, as depicted by our highly detailed model. It was renumbered 22 in 1946, by which time it carried wartime plain black. When it was withdrawn from King’s Cross in April 1963, it was in lined BR green and numbered 60022. The locomotive is preserved in its original livery at the National Railway Museum in York. 'Mallard' has always been one of our most popular models. In 2026, we have given the A4 a tooling update and the model now includes the new Hornby steam generator technology, working headlights and tender lights. Specific to R30551SS Running number 4468 Lined Garter Blue livery Non-corridor tender Double chimney arrangement Valanced streamline body made from die-cast metal LHD cab arrangement Working headlights Working tender lights Common Class A4 features High detail OO gauge model based on extensive research and original works drawings Die-cast chassis and boiler High detail cab and fully decorated backhead with decorated instrument dials Pre-fitted 21-pin HM7000 decoder and speaker. The decoder is compatible with NMRA DCC controllers, HM7000 APP control and has the Class A4 sound profile pre-installed for accurate locomotive sounds, synchronised with the chuff rate. Pre-fitted steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Adjustable steam output settings via the decoder HM7000 Power Bank compatible Powerful 5 pole skew wound motor Illuminated flickering firebox Quick release locomotive to tender connector Pogo pin wheel pickup arrangement for easy pickup servicing Electrical pickups on main drive wheels and tender wheels Fully decorated crew figures Turned brass safety valve Prototypical size metal handrails with brass stanchions Brass main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Separately fitted simulated coal load. - DCC HM7000 TXS Sound Fitted w/ Smoke - OO Scale

Hornby LNER B12 61516 BR Lined Black (Late)

LNER B12 61516 BR Lined Black (Late)  A shining replica of the BR B12 Class, this OO gauge model is highly detailed, with sprung metal buffers and NEM tension lock couplings. Upgrade to HM7000 with a 21-pin decoder (sold seperately).  Stephen D Holden designed the ‘S69’ inside cylinder 4-6-0s for the Great Eastern Railway. First introduced in 1911, it was the last of 71 built before the Grouping appeared in 1921. However, a further ten were constructed by Beyer, Peacock for the LNER in 1928, by which time they had been designated the ‘B12’ Class.  Built at Stratford Works in 1913, 1516 entered traffic on GER expresses out of London’s Liverpool Street station in the November. In 1924, it was renumbered 8516, then 1516 under the LNER’s 1947 renumbering scheme. A year later it became BR’s 61516 and was withdrawn from Cambridge in July 1958. - DCC Ready 8-Pin Socket - OO Scale

Hornby BR Rebuilt Merchant Navy 35028 'Clan line' BR Green (Preserved)

BR Rebuilt Merchant Navy 35028 'Clan line' BR Lined Green (Preserved) The BR Rebuilt Merchant Navy 'Clan Line' is back in OO model form. This newly tooled model locomotive has sprung metal buffers and NEM tension lock couplings and is a highly detailed replica of a popular steam engine. One of the last of its class to be built, this locomotive was completed after nationalisation of Britain’s railways to Bulleid’s Southern ‘Merchant Navy’ design, complete with streamlined casing and chain-driven valve gear, entering service in December 1948. It didn’t receive its name until January 1951, during a ceremony at Southampton Docks. Like all 30 members of the class, ‘Clan Line’ was rebuilt, in its case, during 1959, and remained in service until withdrawal from Nine Elms, London in July 1947. It was subsequently saved privately for preservation and is a regular main line performer, once hauling the prestigious Belmond British Pullman. MODEL SPECIFICATION Die-cast chassis, pony truck and trailing truck Die-cast boiler and running plate Merchant Navy Bullied-Firth-Brown wheels High detail cab and fully decorated backhead with decorated instrument dials Powerful 5 pole skew wound motor with cardan shaft and flywheel Flywheel with cardan shaft arrangement for smooth running Pogo pin wheel pickup arrangement for easy pickup servicing Die-cast connecting rods and valve gear Oilite main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Optional fit rear flanged wheelset. Only recommended for larger layouts with sweeping curves or for display purposes Wheel pickups on the main locomotive and tender wheelsets Separately fitted simulated coal load. TOOLING High detail OO gauge model based on extensive research, 3D scanning and original works drawings Cast trailing truck Modern 6000 gallon tender with additional pump, air tanks and battery arrangement for main line running (as preserved) Opening cab roof vent DCC Fitted with a 21-pin decoder socket Flickering firebox Working cab light MCU controlled electric front lamps for full lamp code control Working tender lamps Eight-way locomotive to tender connection LIVERY BR Lined Green livery - OO Scale

Hornby BR Rebuilt Merchant Navy 35028 'Clan line' BR Green(Sound/Smoke)

BR Rebuilt Merchant Navy 35028 'Clan line' BR Lined Green (Sound/Smoke Fitted) The BR Rebuilt Merchant Navy 'Clan Line' is back in OO model form. This newly tooled model locomotive has sprung metal buffers and NEM tension lock couplings and is a highly detailed replica of a popular steam engine. One of the last of its class to be built, this locomotive was completed after nationalisation of Britain’s railways to Bulleid’s Southern ‘Merchant Navy’ design, complete with streamlined casing and chain-driven valve gear, entering service in December 1948. It didn’t receive its name until January 1951, during a ceremony at Southampton Docks. Like all 30 members of the class, ‘Clan Line’ was rebuilt, in its case, during 1959, and remained in service until withdrawal from Nine Elms, London in July 1947. It was subsequently saved privately for preservation and is a regular main line performer, once hauling the prestigious Belmond British Pullman. Please Note: this model requires a DCC controller or the HM7000 app to control.  Specific to R30490SS: STEAM GENERATOR Pre-fitted steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Adjustable steam output settings via the decoder Water reservoir for up to 20 minutes continuous steam running MODEL SPECIFICATION Die-cast chassis, pony truck and trailing truck Die-cast boiler and running plate Merchant Navy Bullied-Firth-Brown wheels High detail cab and fully decorated backhead with decorated instrument dials Powerful 5 pole skew wound motor with cardan shaft and flywheel Flywheel with cardan shaft arrangement for smooth running Pogo pin wheel pickup arrangement for easy pickup servicing Die-cast connecting rods and valve gear Oilite main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Optional fit rear flanged wheelset. Only recommended for larger layouts with sweeping curves or for display purposes Wheel pickups on the main locomotive and tender wheelsets Separately fitted simulated coal load. TOOLING High detail OO gauge model based on extensive research, 3D scanning and original works drawings Cast trailing truck Modern 6000 gallon tender with additional pump, air tanks and battery arrangement for main line running (as preserved) Opening cab roof vent DCC Fitted with a 21-pin decoder socket Flickering firebox Working cab light MCU controlled electric front lamps for full lamp code control Working tender lamps Eight-way locomotive to tender connection LIVERY BR Lined Green livery - OO Scale

Hornby Battle of Britain Class (Rebuilt) 34053 '303 Squadron' BR Green

Battle of Britain Class (Rebuilt) 34053 '303 Squadron' BR Lined Green The BR Battle of Britain Class '303 Squadron' model locomotive brings military pride to your model railway layout. With sprung metal buffers and NEM tension lock couplings, you can upgrade this OO model to HM7000 control by adding a 21-pin decoder (sold seperately).  This locomotive was built in 1947 at the SR’s Brighton Works as 21C153 and named ‘Sir Keith Park’. It was built to Bulleid’s three-cylinder air-smoothed design with chain drive and an oil-bath for lubrication. Along with many of its classmates, it was rebuilt to Jarvis’ more conventional design with air smooth casing removed and Walschaerts valve gear fitted.  Withdrawn in 1965, it was later rescued from Barry scrapyard and returned to steam by Southern Locomotives Ltd. In 2024, it was temporarily renamed ‘303 Squadron’ at the Spa Valley Railway in honour of the Polish fighter squadron that fought in the Battle of Britain. - DCC Ready 21-Pin Socket - OO Scale

Hornby Sovereign Pullman Train Set (TXS Sound/Smoke Fitted)

Sovereign Pullman Train Set (TXS Sound/Smoke Fitted) A masterpiece of British steam engineering reimagined for the modern railway enthusiast. This premium OO gauge train set captures the elegance and power of the legendary A4 Class locomotive, complete with authentic sound, illuminated headlamps and a realistic steam generator. Paired with three exquisitely detailed Pullman coaches featuring interior lighting and glowing table lamps, the set evokes the golden age of luxury rail travel. A double-circuit track layout with siding gives you room to expand, while mains power and Bluetooth control via the free Hornby HM7000 app delivers smooth, intuitive operation from your smartphone or tablet. This is a statement set for those who value heritage, detail and cutting-edge control. Please Note: This set requires the use of the HM7000 free to download APP for control. Includes: A high quality presentation case pull-out draws. A 3rd and 2nd radius loop of track with siding and buffer stop. Points are pre-fitted with point clips for full layout power and control. HM7000 power cable to provide track power. Hornby TrackMat Rerailer A4 Locomotive – Sir Nigel Gresley High detail OO gauge model based on extensive research and original works drawings. Heavy die-cast chassis Running number 60007 BR Pussian Blue Corridor tender Double chimney arrangement. Un-valanced streamline plastic body. LHD cab arrangement. Working headlights Working tender light. High detail cab and fully decorated backhead with decorated instrument dials. Pre-fitted 21-pin HM7000 decoder and speaker. The decoder is compatible with NMRA DCC controllers, HM7000 APP control and has the Merchant Navy sound profile pre-installed for accurate locomotive sounds, synchronised with the chuff rate. Pre-fitted steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Adjustable steam output settings via the decoder. HM7000 Power Bank compatible. Powerful 5 pole skew wound motor. Illuminated flickering firebox. Quick release locomotive to tender connector. Pogo pin wheel pickup arrangement for easy pickup servicing. Electrical pickups on main drive wheels and tender wheels. Fully decorated crew figures. Turned brass safety valve Prototypical size metal handrails with brass stanchions. Brass main drive bearings. Sprung metal buffers. Front and rear NEM coupling pocket. Separately fitted simulated coal load. Pullman Coaches – Ione, Lucille & Zena All steel K-Type Pullman Coaches Exquisite decoration with a wealth of separately fitted parts. Working table lamps Sprung metal buffers NEM tension lock couplers Pullman Coach Ione – Kitchen First Pullman Coach Lucille – First Class Parlour Pullman Coach Zena – First Class Parlour - OO Scale

Dapol Class 59/2 59206 "John F Yeoman" Freightliner G&W Orange

Class 59/2 59206 "John F Yeoman" Freightliner G&W Orange  The Class 59 is a Co-Co formation diesel locomotive and the first US produced, privately-owned locomotive to operate regularly in the UK. The ordering of the first Class 59 was a result of quarry company Foster Yeomans dissatisfaction with the performance of the BR Class 56. The first 4 locomotives built by GMs Electromotive Division were delivered to Foster Yeoman during 1986 and 59005 in 1989. Proving very successful; one locomotive setting a new UK haulage record for a single locomotive of 4639 tonnes. Foster Yeomans rivals, Amey Roadstone Corp. (ARC) also ordered four modified Class 59s (59/1) as did National Power, who ordered six (59/2). GM invested in this initial UK success by extensively modifying the class 59 internally to produce the Class 66, also hugely successful, within both the UK and Continental Europe. Features: PLUX-22 DCC Decoder Socket Finely moulded body with many applied fine details  Printed name plates (Etched plates supplied separately)  Cast wheels with fine relief and appropriate colouring  Heavy diecast chassis with all wheel pick up  NEM pockets as standard  DC lighting with independent control of #1 & #2 end lamps (push/pull/light engine) and cab lighting (controlled by switches)  DCC controlled fully independent lighting:  Push/Pull and light engine modes for head and tail lights  Day/Night headlamp selection  Marker lamp control (where applicable)  Independent cab lighting (leading cab /trailing cab /off)   - OO Scale 

Dapol Class 59/0 59002 "Alan J Day" Aggregate Industries

Class 59/0 59002 "Alan J Day" Aggregate Industries  The Class 59 is a Co-Co formation diesel locomotive and the first US produced, privately-owned locomotive to operate regularly in the UK. The ordering of the first Class 59 was a result of quarry company Foster Yeomans dissatisfaction with the performance of the BR Class 56. The first 4 locomotives built by GMs Electromotive Division were delivered to Foster Yeoman during 1986 and 59005 in 1989. Proving very successful; one locomotive setting a new UK haulage record for a single locomotive of 4639 tonnes. Foster Yeomans rivals, Amey Roadstone Corp. (ARC) also ordered four modified Class 59s (59/1) as did National Power, who ordered six (59/2). GM invested in this initial UK success by extensively modifying the class 59 internally to produce the Class 66, also hugely successful, within both the UK and Continental Europe. Features: PLUX-22 DCC Decoder Socket Finely moulded body with many applied fine details  Printed name plates (Etched plates supplied separately)  Cast wheels with fine relief and appropriate colouring  Heavy diecast chassis with all wheel pick up  NEM pockets as standard  DC lighting with independent control of #1 & #2 end lamps (push/pull/light engine) and cab lighting (controlled by switches)  DCC controlled fully independent lighting:  Push/Pull and light engine modes for head and tail lights  Day/Night headlamp selection  Marker lamp control (where applicable)  Independent cab lighting (leading cab /trailing cab /off)   - OO Scale 

Dapol Class 59/0 59004 "Paul A Hammond" Foster Yeoman (Late)

Class 59/0 59004 "Paul A Hammond" Foster Yeoman (Late) The Class 59 is a Co-Co formation diesel locomotive and the first US produced, privately-owned locomotive to operate regularly in the UK. The ordering of the first Class 59 was a result of quarry company Foster Yeomans dissatisfaction with the performance of the BR Class 56. The first 4 locomotives built by GMs Electromotive Division were delivered to Foster Yeoman during 1986 and 59005 in 1989. Proving very successful; one locomotive setting a new UK haulage record for a single locomotive of 4639 tonnes. Foster Yeomans rivals, Amey Roadstone Corp. (ARC) also ordered four modified Class 59s (59/1) as did National Power, who ordered six (59/2). GM invested in this initial UK success by extensively modifying the class 59 internally to produce the Class 66, also hugely successful, within both the UK and Continental Europe. Features: PLUX-22 DCC Decoder Socket Finely moulded body with many applied fine details  Printed name plates (Etched plates supplied separately)  Cast wheels with fine relief and appropriate colouring  Heavy diecast chassis with all wheel pick up  NEM pockets as standard  DC lighting with independent control of #1 & #2 end lamps (push/pull/light engine) and cab lighting (controlled by switches)  DCC controlled fully independent lighting:  Push/Pull and light engine modes for head and tail lights  Day/Night headlamp selection  Marker lamp control (where applicable)  Independent cab lighting (leading cab /trailing cab /off)   - OO Scale 

Dapol Class 59/1 59101 "Village of Whatley" ARC (Revised)

Class 59/1 59101 "Village of Whatley" ARC (Revised) The Class 59 is a Co-Co formation diesel locomotive and the first US produced, privately-owned locomotive to operate regularly in the UK. The ordering of the first Class 59 was a result of quarry company Foster Yeomans dissatisfaction with the performance of the BR Class 56. The first 4 locomotives built by GMs Electromotive Division were delivered to Foster Yeoman during 1986 and 59005 in 1989. Proving very successful; one locomotive setting a new UK haulage record for a single locomotive of 4639 tonnes. Foster Yeomans rivals, Amey Roadstone Corp. (ARC) also ordered four modified Class 59s (59/1) as did National Power, who ordered six (59/2). GM invested in this initial UK success by extensively modifying the class 59 internally to produce the Class 66, also hugely successful, within both the UK and Continental Europe. Features: PLUX-22 DCC Decoder Socket Finely moulded body with many applied fine details  Printed name plates (Etched plates supplied separately)  Cast wheels with fine relief and appropriate colouring  Heavy diecast chassis with all wheel pick up  NEM pockets as standard  DC lighting with independent control of #1 & #2 end lamps (push/pull/light engine) and cab lighting (controlled by switches)  DCC controlled fully independent lighting:  Push/Pull and light engine modes for head and tail lights  Day/Night headlamp selection  Marker lamp control (where applicable)  Independent cab lighting (leading cab /trailing cab /off)   - OO Scale 

Dapol Class 59/1 59104 "Village of Great Elm" Hanson

Class 59/1 59104 "Village of Great Elm" Hanson The Class 59 is a Co-Co formation diesel locomotive and the first US produced, privately-owned locomotive to operate regularly in the UK. The ordering of the first Class 59 was a result of quarry company Foster Yeomans dissatisfaction with the performance of the BR Class 56. The first 4 locomotives built by GMs Electromotive Division were delivered to Foster Yeoman during 1986 and 59005 in 1989. Proving very successful; one locomotive setting a new UK haulage record for a single locomotive of 4639 tonnes. Foster Yeomans rivals, Amey Roadstone Corp. (ARC) also ordered four modified Class 59s (59/1) as did National Power, who ordered six (59/2). GM invested in this initial UK success by extensively modifying the class 59 internally to produce the Class 66, also hugely successful, within both the UK and Continental Europe. Features: PLUX-22 DCC Decoder Socket Finely moulded body with many applied fine details  Printed name plates (Etched plates supplied separately)  Cast wheels with fine relief and appropriate colouring  Heavy diecast chassis with all wheel pick up  NEM pockets as standard  DC lighting with independent control of #1 & #2 end lamps (push/pull/light engine) and cab lighting (controlled by switches)  DCC controlled fully independent lighting:  Push/Pull and light engine modes for head and tail lights  Day/Night headlamp selection  Marker lamp control (where applicable)  Independent cab lighting (leading cab /trailing cab /off)   - OO Scale 

Dapol Class 59/2 59201 "Vale of York" EWS

Class 59/2 59201 "Vale of York" EWS The Class 59 is a Co-Co formation diesel locomotive and the first US produced, privately-owned locomotive to operate regularly in the UK. The ordering of the first Class 59 was a result of quarry company Foster Yeomans dissatisfaction with the performance of the BR Class 56. The first 4 locomotives built by GMs Electromotive Division were delivered to Foster Yeoman during 1986 and 59005 in 1989. Proving very successful; one locomotive setting a new UK haulage record for a single locomotive of 4639 tonnes. Foster Yeomans rivals, Amey Roadstone Corp. (ARC) also ordered four modified Class 59s (59/1) as did National Power, who ordered six (59/2). GM invested in this initial UK success by extensively modifying the class 59 internally to produce the Class 66, also hugely successful, within both the UK and Continental Europe. Features: PLUX-22 DCC Decoder Socket Finely moulded body with many applied fine details  Printed name plates (Etched plates supplied separately)  Cast wheels with fine relief and appropriate colouring  Heavy diecast chassis with all wheel pick up  NEM pockets as standard  DC lighting with independent control of #1 & #2 end lamps (push/pull/light engine) and cab lighting (controlled by switches)  DCC controlled fully independent lighting:  Push/Pull and light engine modes for head and tail lights  Day/Night headlamp selection  Marker lamp control (where applicable)  Independent cab lighting (leading cab /trailing cab /off)   - OO Scale 

Graham Farish GWR 49XX 'Hall' 4936 'Kinlet Hall' BR Lined Green (Late) (N)

GWR 49XX 'Hall' 4936 'Kinlet Hall' BR Lined Green (Late) The Great Western Railway (GWR) was famous for its variety of 4-6-0 steam locomotive classes, and none were more numerous and successful than the 49XX ‘Hall’ Class. After a long period of absence from the Graham Farish range, the ‘Hall’ makes a triumphant return for 2025 with this brand new model that has been designed from the rails up to produce a masterpiece in miniature befitting of such an iconic prototype. These mixed traffic machines were found across the Great Western network and beyond. Constructed from a multitude of high-fidelity parts and decorated with an exquisite paint finish, the new Graham Farish ‘Hall’ has an impressive technical specification to match. Employing a powerful coreless motor to drive the wheels through a diecast metal gearbox, electrical pickup comes from all driving and tender wheels and separate metal bearings are fitted to the driving wheel axles assuring smooth and reliable running. The tender houses a speaker and Next18 DCC decoder socket, making it easy to add sound Details: Locomotive is Preserved Pristine BR Lined Green (Late Crest) Livery Running No. 4936 Named ‘Kinlet Hall’ Collett 4,000-gallon Tender BR Smokebox Door with Numberplate and Shedplate Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Speaker installed in the tender of all models for optimum sound reproduction Length 141mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater - N Scale

Graham Farish GWR 49XX 'Hall' 4936 'Kinlet Hall' BR Lined Green (Late) (SF)(N)

GWR 49XX 'Hall' 4936 'Kinlet Hall' BR Lined Green (Late) (Sound Fitted) The Great Western Railway (GWR) was famous for its variety of 4-6-0 steam locomotive classes, and none were more numerous and successful than the 49XX ‘Hall’ Class. After a long period of absence from the Graham Farish range, the ‘Hall’ makes a triumphant return for 2025 with this brand new model that has been designed from the rails up to produce a masterpiece in miniature befitting of such an iconic prototype. These mixed traffic machines were found across the Great Western network and beyond. Constructed from a multitude of high-fidelity parts and decorated with an exquisite paint finish, the new Graham Farish ‘Hall’ has an impressive technical specification to match. Employing a powerful coreless motor to drive the wheels through a diecast metal gearbox, electrical pickup comes from all driving and tender wheels and separate metal bearings are fitted to the driving wheel axles assuring smooth and reliable running. The tender houses a speaker and Next18 DCC decoder socket, making it easy to add sound Details: Locomotive is Preserved Pristine BR Lined Green (Late Crest) Livery Running No. 4936 Named ‘Kinlet Hall’ Collett 4,000-gallon Tender BR Smokebox Door with Numberplate and Shedplate Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Speaker installed in the tender of all models for optimum sound reproduction Length 141mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater - N Scale

Graham Farish GWR 49XX 'Hall' 4962 'Ragley Hall' BR Lined Green (Early) (N)

GWR 49XX 'Hall' 4962 'Ragley Hall' BR Lined Green (Early) The Great Western Railway (GWR) was famous for its variety of 4-6-0 steam locomotive classes, and none were more numerous and successful than the 49XX ‘Hall’ Class. After a long period of absence from the Graham Farish range, the ‘Hall’ makes a triumphant return for 2025 with this brand new model that has been designed from the rails up to produce a masterpiece in miniature befitting of such an iconic prototype. These mixed traffic machines were found across the Great Western network and beyond. Constructed from a multitude of high-fidelity parts and decorated with an exquisite paint finish, the new Graham Farish ‘Hall’ has an impressive technical specification to match. Employing a powerful coreless motor to drive the wheels through a diecast metal gearbox, electrical pickup comes from all driving and tender wheels and separate metal bearings are fitted to the driving wheel axles assuring smooth and reliable running. The tender houses a speaker and Next18 DCC decoder socket, making it easy to add sound Details: Pristine BR Lined Green (Early Emblem) Livery Running No. 4962 Named ‘Ragley Hall’ Collett 4,000-gallon Tender BR Smokebox Door with Numberplate and Shedplate Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Speaker installed in the tender of all models for optimum sound reproduction Length 141mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater - N Scale

Graham Farish GWR 'Modified Hall' 6960 'Raveningham Hall' GWR L/Green (SF) (N)

GWR 'Modified Hall' 6960 'Raveningham Hall' GWR Lined Green (Sound Fitted) The Great Western Railway (GWR) was famous for its variety of 4-6-0 steam locomotive classes, and none were more numerous and successful than the 49XX ‘Hall’ Class. The type was later developed to create the 6959 ‘Modified Hall’ Class which continued the successes of the ‘Halls’, operating from the final years of the GWR and throughout the British Railways period until steam ended on the Western Region in December 1965 yet N scale models of these iconic machines have never been produced, until now! Developed alongside the brand new ‘Halls’ for the Graham Farish range, these masterpieces in miniature have been created through extensive research and detailed surveys of the preserved locomotives, of which there are several. The mixed traffic machines were found across the GWR network and beyond. Constructed from a multitude of high-fidelity parts and decorated with an exquisite paint finish, the new Graham Farish ‘Modified Hall’ has an impressive technical specification to match. Employing a powerful coreless motor to drive the wheels through a diecast metal gearbox, electrical pickup comes from all driving and tender wheels and separate metal bearings are fitted to the driving wheel axles assuring smooth and reliable running. The tender houses a speaker and Next18 DCC decoder socket, making it easy to add sound Details: Locomotive is Preserved Pristine GWR Lined Green (Great (crest) Western) Livery Running No. 6960 Named ‘Raveningham Hall’ Collett 4,000-gallon Tender GWR Smokebox Door without Numberplate Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Speaker installed in the tender of all models for optimum sound reproduction Length 141mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater - N Scale

Graham Farish GWR 'Modified Hall' 6960 'Raveningham Hall' GWR Lined Green (N)

GWR 'Modified Hall' 6960 'Raveningham Hall' GWR Lined Green The Great Western Railway (GWR) was famous for its variety of 4-6-0 steam locomotive classes, and none were more numerous and successful than the 49XX ‘Hall’ Class. The type was later developed to create the 6959 ‘Modified Hall’ Class which continued the successes of the ‘Halls’, operating from the final years of the GWR and throughout the British Railways period until steam ended on the Western Region in December 1965 yet N scale models of these iconic machines have never been produced, until now! Developed alongside the brand new ‘Halls’ for the Graham Farish range, these masterpieces in miniature have been created through extensive research and detailed surveys of the preserved locomotives, of which there are several. The mixed traffic machines were found across the GWR network and beyond. Constructed from a multitude of high-fidelity parts and decorated with an exquisite paint finish, the new Graham Farish ‘Modified Hall’ has an impressive technical specification to match. Employing a powerful coreless motor to drive the wheels through a diecast metal gearbox, electrical pickup comes from all driving and tender wheels and separate metal bearings are fitted to the driving wheel axles assuring smooth and reliable running. The tender houses a speaker and Next18 DCC decoder socket, making it easy to add sound Details: Locomotive is Preserved Pristine GWR Lined Green (Great (crest) Western) Livery Running No. 6960 Named ‘Raveningham Hall’ Collett 4,000-gallon Tender GWR Smokebox Door without Numberplate Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Speaker installed in the tender of all models for optimum sound reproduction Length 141mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater - N Scale

Graham Farish GWR 'Modified Hall' 7904 'Fountains Hall' BR Lined Black (N)

GWR 'Modified Hall' 7904 'Fountains Hall' BR Lined Black The Great Western Railway (GWR) was famous for its variety of 4-6-0 steam locomotive classes, and none were more numerous and successful than the 49XX ‘Hall’ Class. The type was later developed to create the 6959 ‘Modified Hall’ Class which continued the successes of the ‘Halls’, operating from the final years of the GWR and throughout the British Railways period until steam ended on the Western Region in December 1965 yet N scale models of these iconic machines have never been produced, until now! Developed alongside the brand new ‘Halls’ for the Graham Farish range, these masterpieces in miniature have been created through extensive research and detailed surveys of the preserved locomotives, of which there are several. The mixed traffic machines were found across the GWR network and beyond. Constructed from a multitude of high-fidelity parts and decorated with an exquisite paint finish, the new Graham Farish ‘Modified Hall’ has an impressive technical specification to match. Employing a powerful coreless motor to drive the wheels through a diecast metal gearbox, electrical pickup comes from all driving and tender wheels and separate metal bearings are fitted to the driving wheel axles assuring smooth and reliable running. The tender houses a speaker and Next18 DCC decoder socket, making it easy to add sound Details: Pristine BR Lined Black (Early Emblem) Livery Running No. 7904 Named ‘Fountains Hall’ Collett 4,000-gallon Tender BR Smokebox Door with Numberplate and Shedplate Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Speaker installed in the tender of all models for optimum sound reproduction Length 141mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater - N Scale

Graham Farish GWR 'Modified Hall' 7904 'Fountains Hall' BR Lined Black (SF)(N)

GWR 'Modified Hall' 7904 'Fountains Hall' BR Lined Black (Sound Fitted) The Great Western Railway (GWR) was famous for its variety of 4-6-0 steam locomotive classes, and none were more numerous and successful than the 49XX ‘Hall’ Class. The type was later developed to create the 6959 ‘Modified Hall’ Class which continued the successes of the ‘Halls’, operating from the final years of the GWR and throughout the British Railways period until steam ended on the Western Region in December 1965 yet N scale models of these iconic machines have never been produced, until now! Developed alongside the brand new ‘Halls’ for the Graham Farish range, these masterpieces in miniature have been created through extensive research and detailed surveys of the preserved locomotives, of which there are several. The mixed traffic machines were found across the GWR network and beyond. Constructed from a multitude of high-fidelity parts and decorated with an exquisite paint finish, the new Graham Farish ‘Modified Hall’ has an impressive technical specification to match. Employing a powerful coreless motor to drive the wheels through a diecast metal gearbox, electrical pickup comes from all driving and tender wheels and separate metal bearings are fitted to the driving wheel axles assuring smooth and reliable running. The tender houses a speaker and Next18 DCC decoder socket Details: Pristine BR Lined Black (Early Emblem) Livery Running No. 7904 Named ‘Fountains Hall’ Collett 4,000-gallon Tender BR Smokebox Door with Numberplate and Shedplate Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Speaker installed in the tender of all models for optimum sound reproduction Length 141mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater - N Scale

Bachmann Class 47/7 47791 'Venice Simplon Orient Express' RES

Class 47/7 47791 'Venice Simplon Orient Express' RES Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Rail Express Systems livery Running No. 47791 Named ‘Venice Simplon Orient Express’ Etched Nameplates and Depot Plaques included Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Twin Bufferbeam Brackets denoting a Crewe-built Machine Cut-Cab Locomotive Bufferbeam-mounted ETH Equipment Scottish Jumper Cables TDM Jumper Cables Single Arm Windscreen Wipers High Intensity Headlight RES Taillights with Multifaceted Lenses Round Buffers Checker Plate Kickplate below Cab Door Partially-plated Cab Roof Vents Serck Radiator Grilles Smooth Exhaust Panels Blanked Roof Boiler Port Water Tanks Removed Later Extended Range Fuel Tanks NRN Aerials Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/7 47791 'Venice Simplon Orient Express' RES (SF Deluxe)

Class 47/7 47791 'Venice Simplon Orient Express' RES (Sound Fitted Deluxe) Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Rail Express Systems livery Running No. 47791 Named ‘Venice Simplon Orient Express’ Etched Nameplates and Depot Plaques included Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Twin Bufferbeam Brackets denoting a Crewe-built Machine Cut-Cab Locomotive Bufferbeam-mounted ETH Equipment Scottish Jumper Cables TDM Jumper Cables Single Arm Windscreen Wipers High Intensity Headlight RES Taillights with Multifaceted Lenses Round Buffers Checker Plate Kickplate below Cab Door Partially-plated Cab Roof Vents Serck Radiator Grilles Smooth Exhaust Panels Blanked Roof Boiler Port Water Tanks Removed Later Extended Range Fuel Tanks NRN Aerials Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/7 47791 'Venice Simplon Orient Express' RES (SF)

Class 47/7 47791 'Venice Simplon Orient Express' RES (Sound Fitted) Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Rail Express Systems livery Running No. 47791 Named ‘Venice Simplon Orient Express’ Etched Nameplates and Depot Plaques included Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Twin Bufferbeam Brackets denoting a Crewe-built Machine Cut-Cab Locomotive Bufferbeam-mounted ETH Equipment Scottish Jumper Cables TDM Jumper Cables Single Arm Windscreen Wipers High Intensity Headlight RES Taillights with Multifaceted Lenses Round Buffers Checker Plate Kickplate below Cab Door Partially-plated Cab Roof Vents Serck Radiator Grilles Smooth Exhaust Panels Blanked Roof Boiler Port Water Tanks Removed Later Extended Range Fuel Tanks NRN Aerials Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/8 47826 WCRC Maroon

Class 47/8 47826 WCRC Maroon Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine West Coast Railways Company Maroon livery Running No. 47826 Plated Headcode Panels with Sealed Beam Marker Lights Twin Bufferbeam Brackets denoting a Crewe-built Machine Cut-Cab Locomotive Bufferbeam-mounted ETH Equipment Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Checker Plate Kickplate below Cab Door Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Blanked Roof Boiler Port Water Tanks Removed Later Extended Range Fuel Tanks NRN Aerials Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive (fitted at the No. 2 End) Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/0 D1940 BR Two-Tone Green (SYP)

Class 47/0 D1940 BR Two-Tone Green (SYP) Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Two-Tone Green (Small Yellow Panels) livery Running No. D1940 Glazed Headcode Panels Single Bufferbeam Bracket denoting a Brush-built Machine Double Arm Windscreen Wipers Round Buffers Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Clayton Roof Boiler Port 1250 Gallon Water Tanks Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/0 D1940 BR Two-Tone Green (SYP) (Sound Fitted)

Class 47/0 D1940 BR Two-Tone Green (SYP) (Sound Fitted) Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Two-Tone Green (Small Yellow Panels) livery Running No. D1940 Glazed Headcode Panels Single Bufferbeam Bracket denoting a Brush-built Machine Double Arm Windscreen Wipers Round Buffers Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Clayton Roof Boiler Port 1250 Gallon Water Tanks Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/0 47280 BR Railfreight Grey (Sound Fitted)

Class 47/0 47280 BR Railfreight Grey (Sound Fitted) Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Railfreight Grey livery Running No. 47280 Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Twin Bufferbeam Brackets denoting a Crewe-built Machine Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Blanked Roof Boiler Port 1,200 Gallon Water Tanks with Water Filler Valves Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/0 D1922 BR Two-Tone Green (SYP)

Class 47/0 D1922 BR Two-Tone Green (SYP) Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Two-Tone Green (Small Yellow Panels) livery Running No. D1922 Glazed Headcode Panels Single Bufferbeam Bracket denoting a Brush-built Machine Double Arm Windscreen Wipers Round Buffers Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Clayton Roof Boiler Port 1250 Gallon Water Tanks Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/0 D1922 BR Two-Tone Green (SYP) (Sound Fitted Deluxe)

Class 47/0 D1922 BR Two-Tone Green (SYP) (Sound Fitted Deluxe) Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Two-Tone Green (Small Yellow Panels) livery Running No. D1922 Glazed Headcode Panels Single Bufferbeam Bracket denoting a Brush-built Machine Double Arm Windscreen Wipers Round Buffers Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Clayton Roof Boiler Port 1250 Gallon Water Tanks Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/0 47226 BR Blue (Sound Fitted Deluxe)

Class 47/0 47226 BR Blue (Sound Fitted Deluxe) Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Blue livery Running No. 47226 Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Single Bufferbeam Bracket denoting a Brush-built Machine Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Blanked Roof Boiler Port Water Tanks Removed Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/0 47238 BR Blue

Class 47/0 47238 BR Blue Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Blue livery Running No. 47238 Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Single Bufferbeam Bracket denoting a Brush-built Machine Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Blanked Roof Boiler Port Water Tanks Removed Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/0 47238 BR Blue (Sound Fitted Deluxe)

Class 47/0 47238 BR Blue (Sound Fitted Deluxe) Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Blue livery Running No. 47238 Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Single Bufferbeam Bracket denoting a Brush-built Machine Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Blanked Roof Boiler Port Water Tanks Removed Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/0 47238 BR Blue (Sound Fitted)

Class 47/0 47238 BR Blue (Sound Fitted) Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Blue livery Running No. 47238 Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Single Bufferbeam Bracket denoting a Brush-built Machine Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Blanked Roof Boiler Port Water Tanks Removed Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/0 47280 BR Railfreight Grey

Class 47/0 47280 BR Railfreight Grey Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Railfreight Grey livery Running No. 47280 Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Twin Bufferbeam Brackets denoting a Crewe-built Machine Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Blanked Roof Boiler Port 1,200 Gallon Water Tanks with Water Filler Valves Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/0 47280 BR Railfreight Grey (Sound Fitted Deluxe)

Class 47/0 47280 BR Railfreight Grey (Sound Fitted Deluxe) Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Railfreight Grey livery Running No. 47280 Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Twin Bufferbeam Brackets denoting a Crewe-built Machine Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Blanked Roof Boiler Port 1,200 Gallon Water Tanks with Water Filler Valves Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

EFE Rail Class 313 3-Car EMU 313036 BR Blue & Grey

Class 313 3-Car EMU 313036 BR Blue & Grey Bachmann Europe is delighted to unveil a range of all-new tooling Class 313 and Class 314 Electric Multiple Units from its EFE Rail brand; the first time that any such ‘PEP’ family EMUs have been produced ready-to-run in OO Scale. The EFE Rail Class 313/314 is comprised of three highly detailed vehicles featuring precision moulded bodyshells adorned with separate detailing parts and an extensive collection of underfloor equipment and separately fitted pipework. Drive is provided through the centre car, with a coreless motor powering each bogie and mounted within a diecast metal chassis to give a strong drive mechanism and low centre of gravity. This vehicle also houses a Plux22 DCC decoder socket and the close fitting electrically conductive couplings mean that just one decoder controls both motors and the lighting in all three vehicles. Details: Pristine BR Blue & Grey livery Running No. 313036 Three-car unit comprising car Nos. E62564, E71248 & E62628 Features: Equipped with a PLUX 22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 799mm Coreless motor powering both bogies in centre car Diecast metal chassis provides strong driving mechanism and low centre of gravity 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing NEM coupling fitted at driving cab ends Conductive couplings with integral close coupling mechanism at the inner end of driving vehicles and both ends of pantograph vehicle Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode and destination panels Cab lighting High-intensity headlights where applicable Passenger saloon lighting Door interlock lights (controllable via DCC) - OO Scale

EFE Rail Class 313 3-Car EMU 313061 BR Network SouthEast

Class 313 3-Car EMU 313061 BR Network SouthEast Bachmann Europe is delighted to unveil a range of all-new tooling Class 313 and Class 314 Electric Multiple Units from its EFE Rail brand; the first time that any such ‘PEP’ family EMUs have been produced ready-to-run in OO Scale. The EFE Rail Class 313/314 is comprised of three highly detailed vehicles featuring precision moulded bodyshells adorned with separate detailing parts and an extensive collection of underfloor equipment and separately fitted pipework. Drive is provided through the centre car, with a coreless motor powering each bogie and mounted within a diecast metal chassis to give a strong drive mechanism and low centre of gravity. This vehicle also houses a Plux22 DCC decoder socket and the close fitting electrically conductive couplings mean that just one decoder controls both motors and the lighting in all three vehicles. Details: Pristine BR Network SouthEast livery Running No. 313026 Three-car unit comprising car Nos. 62554, 71228 & 62618 Destination blinds displaying ‘Moorgate’ & ‘Stevenage’ Features ‘Great Northern Line’ branding Features: Equipped with a PLUX 22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 799mm Coreless motor powering both bogies in centre car Diecast metal chassis provides strong driving mechanism and low centre of gravity 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing NEM coupling fitted at driving cab ends Conductive couplings with integral close coupling mechanism at the inner end of driving vehicles and both ends of pantograph vehicle Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode and destination panels Cab lighting High-intensity headlights where applicable Passenger saloon lighting Door interlock lights (controllable via DCC) - OO Scale

EFE Rail Class 313 3-Car EMU 313114 Silverlink Metro

Class 313 3-Car EMU 313114 Silverlink Metro Bachmann Europe is delighted to unveil a range of all-new tooling Class 313 and Class 314 Electric Multiple Units from its EFE Rail brand; the first time that any such ‘PEP’ family EMUs have been produced ready-to-run in OO Scale. The EFE Rail Class 313/314 is comprised of three highly detailed vehicles featuring precision moulded bodyshells adorned with separate detailing parts and an extensive collection of underfloor equipment and separately fitted pipework. Drive is provided through the centre car, with a coreless motor powering each bogie and mounted within a diecast metal chassis to give a strong drive mechanism and low centre of gravity. This vehicle also houses a Plux22 DCC decoder socket and the close fitting electrically conductive couplings mean that just one decoder controls both motors and the lighting in all three vehicles. Details: Pristine Silverlink Metro livery Running No. 313114 Three-car unit comprising car Nos. 62542, 71226 & 62606 Destination blinds displaying ‘Richmond’ & ‘North Woolwich’ Features: Equipped with a PLUX 22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 799mm Coreless motor powering both bogies in centre car Diecast metal chassis provides strong driving mechanism and low centre of gravity 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing NEM coupling fitted at driving cab ends Conductive couplings with integral close coupling mechanism at the inner end of driving vehicles and both ends of pantograph vehicle Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode and destination panels Cab lighting High-intensity headlights where applicable Passenger saloon lighting Door interlock lights (controllable via DCC) - OO Scale

EFE Rail Class 313 3-Car EMU 313121 Network Rail Yellow

Class 313 3-Car EMU 313121 Network Rail Yellow Bachmann Europe is delighted to unveil a range of all-new tooling Class 313 and Class 314 Electric Multiple Units from its EFE Rail brand; the first time that any such ‘PEP’ family EMUs have been produced ready-to-run in OO Scale. The EFE Rail Class 313/314 is comprised of three highly detailed vehicles featuring precision moulded bodyshells adorned with separate detailing parts and an extensive collection of underfloor equipment and separately fitted pipework. Drive is provided through the centre car, with a coreless motor powering each bogie and mounted within a diecast metal chassis to give a strong drive mechanism and low centre of gravity. This vehicle also houses a Plux22 DCC decoder socket and the close fitting electrically conductive couplings mean that just one decoder controls both motors and the lighting in all three vehicles. Details: Pristine Network Rail yellow livery Running No. 313121 Three-car unit comprising car Nos. 62549, 71233 & 62613 Destination boards displaying ‘Special’ Features: Equipped with a PLUX 22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 799mm Coreless motor powering both bogies in centre car Diecast metal chassis provides strong driving mechanism and low centre of gravity 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing NEM coupling fitted at driving cab ends Conductive couplings with integral close coupling mechanism at the inner end of driving vehicles and both ends of pantograph vehicle Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode and destination panels Cab lighting High-intensity headlights where applicable Passenger saloon lighting Door interlock lights (controllable via DCC) - OO Scale

EFE Rail Class 313 3-Car EMU 313201 BR Blue & Grey (Southern)

Class 313 3-Car EMU 313201 BR Blue & Grey (Southern) Bachmann Europe is delighted to unveil a range of all-new tooling Class 313 and Class 314 Electric Multiple Units from its EFE Rail brand; the first time that any such ‘PEP’ family EMUs have been produced ready-to-run in OO Scale. The EFE Rail Class 313/314 is comprised of three highly detailed vehicles featuring precision moulded bodyshells adorned with separate detailing parts and an extensive collection of underfloor equipment and separately fitted pipework. Drive is provided through the centre car, with a coreless motor powering each bogie and mounted within a diecast metal chassis to give a strong drive mechanism and low centre of gravity. This vehicle also houses a Plux22 DCC decoder socket and the close fitting electrically conductive couplings mean that just one decoder controls both motors and the lighting in all three vehicles. Details: Pristine retro BR Blue & Grey (Southern) livery Running No. 313201 Three-car unit comprising car Nos. 62529, 71213 & 63593 Features: Equipped with a PLUX 22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 799mm Coreless motor powering both bogies in centre car Diecast metal chassis provides strong driving mechanism and low centre of gravity 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing NEM coupling fitted at driving cab ends Conductive couplings with integral close coupling mechanism at the inner end of driving vehicles and both ends of pantograph vehicle Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode and destination panels Cab lighting High-intensity headlights where applicable Passenger saloon lighting Door interlock lights (controllable via DCC) - OO Scale

EFE Rail Class 313 3-Car EMU 313211 Southern (Coastway)

Class 313 3-Car EMU 313211 Southern (Coastway) Bachmann Europe is delighted to unveil a range of all-new tooling Class 313 and Class 314 Electric Multiple Units from its EFE Rail brand; the first time that any such ‘PEP’ family EMUs have been produced ready-to-run in OO Scale. The EFE Rail Class 313/314 is comprised of three highly detailed vehicles featuring precision moulded bodyshells adorned with separate detailing parts and an extensive collection of underfloor equipment and separately fitted pipework. Drive is provided through the centre car, with a coreless motor powering each bogie and mounted within a diecast metal chassis to give a strong drive mechanism and low centre of gravity. This vehicle also houses a Plux22 DCC decoder socket and the close fitting electrically conductive couplings mean that just one decoder controls both motors and the lighting in all three vehicles. Details: Pristine Southern (Coastway) livery Running No. 313211 Three-car unit comprising car Nos. 62539, 71223 & 62603 Features: Equipped with a PLUX 22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 799mm Coreless motor powering both bogies in centre car Diecast metal chassis provides strong driving mechanism and low centre of gravity 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing NEM coupling fitted at driving cab ends Conductive couplings with integral close coupling mechanism at the inner end of driving vehicles and both ends of pantograph vehicle Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode and destination panels Cab lighting High-intensity headlights where applicable Passenger saloon lighting Door interlock lights (controllable via DCC) - OO Scale

EFE Rail Class 314 3-Car EMU 314201 Strathclyde PTA Carmine & Cream

Class 314 3-Car EMU 314201 Strathclyde PTA Carmine & Cream Bachmann Europe is delighted to unveil a range of all-new tooling Class 313 and Class 314 Electric Multiple Units from its EFE Rail brand; the first time that any such ‘PEP’ family EMUs have been produced ready-to-run in OO Scale. The EFE Rail Class 313/314 is comprised of three highly detailed vehicles featuring precision moulded bodyshells adorned with separate detailing parts and an extensive collection of underfloor equipment and separately fitted pipework. Drive is provided through the centre car, with a coreless motor powering each bogie and mounted within a diecast metal chassis to give a strong drive mechanism and low centre of gravity. This vehicle also houses a Plux22 DCC decoder socket and the close fitting electrically conductive couplings mean that just one decoder controls both motors and the lighting in all three vehicles. Details: Pristine Strathclyde PTA Carmine & Cream livery Running No. 314201 Three-car unit comprising car Nos. 64583, 71450 & 64584 Destination boards displaying ‘Glasgow Central’ & ‘Neilston’ Features: Equipped with a PLUX 22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 799mm Coreless motor powering both bogies in centre car Diecast metal chassis provides strong driving mechanism and low centre of gravity 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing NEM coupling fitted at driving cab ends Conductive couplings with integral close coupling mechanism at the inner end of driving vehicles and both ends of pantograph vehicle Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode and destination panels Cab lighting High-intensity headlights where applicable Passenger saloon lighting Door interlock lights (controllable via DCC) - OO Scale

EFE Rail Class 314 3-Car EMU 314202 BR Strathclyde PTE Orange & Black

Class 314 3-Car EMU 314202 BR Strathclyde PTE Orange & Black Bachmann Europe is delighted to unveil a range of all-new tooling Class 313 and Class 314 Electric Multiple Units from its EFE Rail brand; the first time that any such ‘PEP’ family EMUs have been produced ready-to-run in OO Scale. The EFE Rail Class 313/314 is comprised of three highly detailed vehicles featuring precision moulded bodyshells adorned with separate detailing parts and an extensive collection of underfloor equipment and separately fitted pipework. Drive is provided through the centre car, with a coreless motor powering each bogie and mounted within a diecast metal chassis to give a strong drive mechanism and low centre of gravity. This vehicle also houses a Plux22 DCC decoder socket and the close fitting electrically conductive couplings mean that just one decoder controls both motors and the lighting in all three vehicles. Details: Pristine BR Strathclyde PTE Orange & Black livery Running No. 314202 Three-car unit comprising car Nos. SC64585, SC71451 & SC64586 Destination boards displaying ‘Newton via Queens Park’ & ‘Glasgow Central via Queens Park’ Features: Equipped with a PLUX 22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 799mm Coreless motor powering both bogies in centre car Diecast metal chassis provides strong driving mechanism and low centre of gravity 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing NEM coupling fitted at driving cab ends Conductive couplings with integral close coupling mechanism at the inner end of driving vehicles and both ends of pantograph vehicle Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode and destination panels Cab lighting High-intensity headlights where applicable Passenger saloon lighting Door interlock lights (controllable via DCC) - OO Scale

EFE Rail Class 314 3-Car EMU 314211 BR Blue & Grey 'Trans-Clyde'

Class 314 3-Car EMU 314211 BR Blue & Grey 'Trans-Clyde' Bachmann Europe is delighted to unveil a range of all-new tooling Class 313 and Class 314 Electric Multiple Units from its EFE Rail brand; the first time that any such ‘PEP’ family EMUs have been produced ready-to-run in OO Scale. The EFE Rail Class 313/314 is comprised of three highly detailed vehicles featuring precision moulded bodyshells adorned with separate detailing parts and an extensive collection of underfloor equipment and separately fitted pipework. Drive is provided through the centre car, with a coreless motor powering each bogie and mounted within a diecast metal chassis to give a strong drive mechanism and low centre of gravity. This vehicle also houses a Plux22 DCC decoder socket and the close fitting electrically conductive couplings mean that just one decoder controls both motors and the lighting in all three vehicles. Details: Pristine BR Blue & Grey ‘Trans-Clyde’ livery Running No. 314211 Three-car unit comprising car Nos. 64603, 71460 & 64604 Destination boards displaying ‘Dumbarton Central via Singer, Glasgow Central and Blantyre’ and ‘Larhall via Singer, Glasgow Central and Blantyre’ Features: Equipped with a PLUX 22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 799mm Coreless motor powering both bogies in centre car Diecast metal chassis provides strong driving mechanism and low centre of gravity 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing NEM coupling fitted at driving cab ends Conductive couplings with integral close coupling mechanism at the inner end of driving vehicles and both ends of pantograph vehicle Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode and destination panels Cab lighting High-intensity headlights where applicable Passenger saloon lighting Door interlock lights (controllable via DCC) - OO Scale

EFE Rail Class 314 3-Car EMU 314212 ScotRail Saltire

Class 314 3-Car EMU 314212 ScotRail Saltire Bachmann Europe is delighted to unveil a range of all-new tooling Class 313 and Class 314 Electric Multiple Units from its EFE Rail brand; the first time that any such ‘PEP’ family EMUs have been produced ready-to-run in OO Scale. The EFE Rail Class 313/314 is comprised of three highly detailed vehicles featuring precision moulded bodyshells adorned with separate detailing parts and an extensive collection of underfloor equipment and separately fitted pipework. Drive is provided through the centre car, with a coreless motor powering each bogie and mounted within a diecast metal chassis to give a strong drive mechanism and low centre of gravity. This vehicle also houses a Plux22 DCC decoder socket and the close fitting electrically conductive couplings mean that just one decoder controls both motors and the lighting in all three vehicles. Details: Pristine Scotrail Saltire livery Running No. 314212 Three-car unit comprising car Nos. 64605, 71461 & 64606 Destination boards displaying ‘Glasgow Central’ & ‘Gourock’ Features: Equipped with a PLUX 22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 799mm Coreless motor powering both bogies in centre car Diecast metal chassis provides strong driving mechanism and low centre of gravity 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing NEM coupling fitted at driving cab ends Conductive couplings with integral close coupling mechanism at the inner end of driving vehicles and both ends of pantograph vehicle Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode and destination panels Cab lighting High-intensity headlights where applicable Passenger saloon lighting Door interlock lights (controllable via DCC) - OO Scale

EFE Rail Class 313 3-Car EMU 313018 BR Network SouthEast

Class 313 3-Car EMU 313018 BR Network SouthEast Bachmann Europe is delighted to unveil a range of all-new tooling Class 313 and Class 314 Electric Multiple Units from its EFE Rail brand; the first time that any such ‘PEP’ family EMUs have been produced ready-to-run in OO Scale. The EFE Rail Class 313/314 is comprised of three highly detailed vehicles featuring precision moulded bodyshells adorned with separate detailing parts and an extensive collection of underfloor equipment and separately fitted pipework. Drive is provided through the centre car, with a coreless motor powering each bogie and mounted within a diecast metal chassis to give a strong drive mechanism and low centre of gravity. This vehicle also houses a Plux22 DCC decoder socket and the close fitting electrically conductive couplings mean that just one decoder controls both motors and the lighting in all three vehicles. Details: Pristine BR Network SouthEast livery Running No. 313018 Three-car unit comprising car Nos. 62546, 71230 & 62610 Destination blinds displaying ‘Watford Junction’ & ‘Euston’ Features ‘North London Lines’ branding Features: Equipped with a PLUX 22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 799mm Coreless motor powering both bogies in centre car Diecast metal chassis provides strong driving mechanism and low centre of gravity 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing NEM coupling fitted at driving cab ends Conductive couplings with integral close coupling mechanism at the inner end of driving vehicles and both ends of pantograph vehicle Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode and destination panels Cab lighting High-intensity headlights where applicable Passenger saloon lighting Door interlock lights (controllable via DCC) - OO Scale

EFE Rail Class 313 3-Car EMU 313026 West Anglia Great Northern (WAGN)

Class 313 3-Car EMU 313026 West Anglia Great Northern (WAGN) Purple Bachmann Europe is delighted to unveil a range of all-new tooling Class 313 and Class 314 Electric Multiple Units from its EFE Rail brand; the first time that any such ‘PEP’ family EMUs have been produced ready-to-run in OO Scale. The EFE Rail Class 313/314 is comprised of three highly detailed vehicles featuring precision moulded bodyshells adorned with separate detailing parts and an extensive collection of underfloor equipment and separately fitted pipework. Drive is provided through the centre car, with a coreless motor powering each bogie and mounted within a diecast metal chassis to give a strong drive mechanism and low centre of gravity. This vehicle also houses a Plux22 DCC decoder socket and the close fitting electrically conductive couplings mean that just one decoder controls both motors and the lighting in all three vehicles. Details: Pristine West Anglia Great Northern Purple livery Running No. 313024 Three-car unit comprising car Nos. 62552, 71236 & 61616 Destination blinds displaying ‘Moorgate’ & ‘Hertford North’ Features: Equipped with a PLUX 22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 799mm Coreless motor powering both bogies in centre car Diecast metal chassis provides strong driving mechanism and low centre of gravity 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing NEM coupling fitted at driving cab ends Conductive couplings with integral close coupling mechanism at the inner end of driving vehicles and both ends of pantograph vehicle Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode and destination panels Cab lighting High-intensity headlights where applicable Passenger saloon lighting Door interlock lights (controllable via DCC) - OO Scale

EFE Rail Class 313 3-Car EMU 313034 BR Blue & Grey

Class 313 3-Car EMU 313034 BR Blue & Grey Bachmann Europe is delighted to unveil a range of all-new tooling Class 313 and Class 314 Electric Multiple Units from its EFE Rail brand; the first time that any such ‘PEP’ family EMUs have been produced ready-to-run in OO Scale. The EFE Rail Class 313/314 is comprised of three highly detailed vehicles featuring precision moulded bodyshells adorned with separate detailing parts and an extensive collection of underfloor equipment and separately fitted pipework. Drive is provided through the centre car, with a coreless motor powering each bogie and mounted within a diecast metal chassis to give a strong drive mechanism and low centre of gravity. This vehicle also houses a Plux22 DCC decoder socket and the close fitting electrically conductive couplings mean that just one decoder controls both motors and the lighting in all three vehicles. Details: Pristine BR Blue & Grey with deep brown chassis livery Running No. 313034 Three-car unit comprising car Nos. E62562, E71246 & E62626 Destination blinds displaying ‘2K12 Moorgate’ Features: Equipped with a PLUX 22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 799mm Coreless motor powering both bogies in centre car Diecast metal chassis provides strong driving mechanism and low centre of gravity 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing NEM coupling fitted at driving cab ends Conductive couplings with integral close coupling mechanism at the inner end of driving vehicles and both ends of pantograph vehicle Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode and destination panels Cab lighting High-intensity headlights where applicable Passenger saloon lighting Door interlock lights (controllable via DCC) - OO Scale

Bachmann Class 150/1 2-Car DMU 150101 Northern

Class 150/1 2-Car DMU 150101 Northern The Class 150 Diesel Multiple Unit (DMU) is an enduring design, first introduced in 1984 much of the fleet remains in service today with operators including Northern Trains. The distinctive blue and white livery of Northern makes a return to the Branchline Class 150 DMU, this time on a Class 150/1 as classmate 150101. Constructed from a highly detailed bodyshell which is adorned with separate components like the cab front handrails, roof ariels and exhaust, the Branchline model replicates the Class 150/1 faithfully. This announcement is also the first time we have produced Class 150/1’s with an accessible toilet in the DMSL, as signified by the blanked off toilet window on one side. The underframe boasts a suite of parts to depict the engine, drive train, electrical gear and auxiliary equipment, while inside the model, passenger seating is included along with cab detail. The livery application, using authentic colours and accurate typefaces and logos just enhances the model’s good looks, while the powerful and smooth drive mechanism and plug and play DCC compatibility makes the Class 150 DMU the perfect addition to any modern OO scale collection. This model is a sales area exclusive and is only available from stockists in Scotland and Northern England. Details: Pristine Northern livery Running No. 150101 Comprises Car Nos. 52101 and 57101 Destination Blinds for Buxton Features: Accessory Pack NEM Coupling Pockets Powerful 5 Pole Motor with Flywheel Interior Detailing and Lighting Directional Lighting Equipped with one 21 Pin DCC Decoder Socket – recommended Decoder 36-557A  Length 540mm - OO Scale

Bachmann Class 150/1 2-Car DMU 150101 Northern (Sound Fitted)

Class 150/1 2-Car DMU 150101 Northern (Sound Fitted) The Class 150 Diesel Multiple Unit (DMU) is an enduring design, first introduced in 1984 much of the fleet remains in service today with operators including Northern Trains. The distinctive blue and white livery of Northern makes a return to the Branchline Class 150 DMU, this time on a Class 150/1 as classmate 150101. Constructed from a highly detailed bodyshell which is adorned with separate components like the cab front handrails, roof ariels and exhaust, the Branchline model replicates the Class 150/1 faithfully. This announcement is also the first time we have produced Class 150/1’s with an accessible toilet in the DMSL, as signified by the blanked off toilet window on one side. The underframe boasts a suite of parts to depict the engine, drive train, electrical gear and auxiliary equipment, while inside the model, passenger seating is included along with cab detail. The livery application, using authentic colours and accurate typefaces and logos just enhances the model’s good looks, while the powerful and smooth drive mechanism and plug and play DCC compatibility makes the Class 150 DMU the perfect addition to any modern OO scale collection. This model is a sales area exclusive and is only available from stockists in Scotland and Northern England. Details: Pristine Northern livery Running No. 150101 Comprises Car Nos. 52101 and 57101 Destination Blinds for Buxton Features: Accessory Pack NEM Coupling Pockets Powerful 5 Pole Motor with Flywheel Interior Detailing and Lighting Directional Lighting Equipped with one 21 Pin DCC Decoder Socket – recommended Decoder 36-557A  Length 540mm - OO Scale

Graham Farish Class 66/0 66124 DB Cargo Red (N)

Class 66/0 66124 DB Cargo Red The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. The Class has been a staple of the Graham Farish range for many years and makes a return, with three new examples suited for any modern image model railway. This model depicts 66124 in the ever-recognisable cherry red of operator DB Cargo. Details: Pristine DB Cargo Red livery Running No. 66124 Features: Directional lighting Accessory Pack Equipped with a 6-pin DCC Decoder Socket – recommended Decoder item No. 36-568A Length 145mm - N Scale

Graham Farish Class 66/5 66515 Freightliner Racing Green (N)

Class 66/5 66515 Freightliner Racing Green The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. The Class has been a staple of the Graham Farish range for many years and makes a return, with three new examples suited for any modern image model railway. This model depicts 66515 in the ubiquitous deep green and yellow livery of operator Freightliner. Details: Pristine Freightliner Green livery Running No. 66515 Features: Directional lighting Accessory Pack Equipped with a 6-pin DCC Decoder Socket – recommended Decoder item No. 36-568A Length 145mm - N Scale

Graham Farish Class 66/7 66730 'Whitemoor' GBRf Europorte (N)

Class 66/7 66730 'Whitemoor' GBRf Europorte The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. The Class has been a staple of the Graham Farish range for many years and makes a return, with three new examples suited for any modern image model railway. This model depicts 66730 whilst named ‘Whitemoor’ and in its present day blue and orange livery of operator GBRf. Details: Pristine GBRf Europorte livery Running No. 66730 Features: Directional lighting Accessory Pack Equipped with a 6-pin DCC Decoder Socket – recommended Decoder item No. 36-568A Length 145mm - N Scale

Bachmann Class 13 D4502 BR Green (Wasp Stripes) DCC Sound Fitted

Bachmann Branchline OO Scale Era 6 Pristine BR Green (Wasp Stripes) livery Running No. D4502 LMS Pattern Buffers Equipped with two Plux22 DCC Decoder Sockets – recommended Decoder item No. 36-570B (x2) Length 244mm   BACHMANN BRANCHLINE CLASS 13 SPECIFICATION EACH CLASS 13 COMPRISES 1x MASTER UNIT AND 1x SLAVE UNIT, BOTH OF WHICH ARE MOTORISED AND FULLY FUNCTIONAL MECHANISM (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at the cab end of the Master unit and the radiator end of the Slave unit Master and Slave units connect with a rigid coupling bar that fits into NEM362 coupling pockets mounted to integral close coupling mechanisms Auto-Release Couplings fitted at the cab end of the master unit and the radiator end of the slave unit – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater DETAILING (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT, WHERE APPLICABLE): Precision moulded bodyshell and frames/running board with numerous separately fitted parts including footsteps, bonnet grilles and lamp irons Separately applied metal detail parts, including sand boxes and sand pipes, grab handles, windscreen wipers, light conduits and lifting points Authentic outside-framed running gear Frames constructed from multiple components, including separate springs and brake gear allowing full relief detailing Sprung metal buffers Cab interior detailing which includes the control desk, instruments & dials, equipment cabinets and handbrake, all with era-specific decoration Each model supplied with a full set of decorated bufferbeam pipework, master-to-slave pipes and cables, bufferbeam infills and accessory parts including screw-link couplings (cosmetic) LIGHTING – MASTER UNIT: Four fully operational marker lights on the cab end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Master and Slave unit), or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control All marker lights on the Master unit can be turned on/off independent of the Slave unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application Lights fitted to the radiator end are prototypically non-functional LIGHTING – SLAVE UNIT: Four fully operational marker lights on the radiator end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Slave and Master unit), or using an easy access microswitch on Analogue control All marker lights on the Slave unit can be turned on/off independent of the Master unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application DCC (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Plux22 DCC decoder interface Easy-access DCC decoder socket via a removable roof panel – secured by clips for ensured fit and alignment 2-pin connector wire for use between the Master and Slave units to ensure full DCC-functionality Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only SOUND: Two quality speakers employed for optimum sound reproduction, one in the Master unit and one in the Slave unit, fitted to every model as standard SOUND FITTED and SOUND FITTED DELUXE versions come with a pre-installed Zimo MS450P22 DCC Sound Decoder in the Master unit and a Zimo MN330P22 Loco Decoder in the Slave Unit Sound files produced specifically for the Bachmann Branchline Class 13 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied

Bachmann Class 13 D4502 BR Green (Wasp Stripes) Deluxe DCC Sound Fitted

Bachmann Branchline OO Scale Era 6 Pristine BR Green (Wasp Stripes) livery Running No. D4502 LMS Pattern Buffers Equipped with two Plux22 DCC Decoder Sockets – recommended Decoder item No. 36-570B (x2) Length 244mm   BACHMANN BRANCHLINE CLASS 13 SPECIFICATION EACH CLASS 13 COMPRISES 1x MASTER UNIT AND 1x SLAVE UNIT, BOTH OF WHICH ARE MOTORISED AND FULLY FUNCTIONAL MECHANISM (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at the cab end of the Master unit and the radiator end of the Slave unit Master and Slave units connect with a rigid coupling bar that fits into NEM362 coupling pockets mounted to integral close coupling mechanisms Auto-Release Couplings fitted at the cab end of the master unit and the radiator end of the slave unit – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater DETAILING (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT, WHERE APPLICABLE): Precision moulded bodyshell and frames/running board with numerous separately fitted parts including footsteps, bonnet grilles and lamp irons Separately applied metal detail parts, including sand boxes and sand pipes, grab handles, windscreen wipers, light conduits and lifting points Authentic outside-framed running gear Frames constructed from multiple components, including separate springs and brake gear allowing full relief detailing Sprung metal buffers Cab interior detailing which includes the control desk, instruments & dials, equipment cabinets and handbrake, all with era-specific decoration Each model supplied with a full set of decorated bufferbeam pipework, master-to-slave pipes and cables, bufferbeam infills and accessory parts including screw-link couplings (cosmetic) LIGHTING – MASTER UNIT: Four fully operational marker lights on the cab end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Master and Slave unit), or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control All marker lights on the Master unit can be turned on/off independent of the Slave unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application Lights fitted to the radiator end are prototypically non-functional LIGHTING – SLAVE UNIT: Four fully operational marker lights on the radiator end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Slave and Master unit), or using an easy access microswitch on Analogue control All marker lights on the Slave unit can be turned on/off independent of the Master unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application DCC (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Plux22 DCC decoder interface Easy-access DCC decoder socket via a removable roof panel – secured by clips for ensured fit and alignment 2-pin connector wire for use between the Master and Slave units to ensure full DCC-functionality Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only SOUND: Two quality speakers employed for optimum sound reproduction, one in the Master unit and one in the Slave unit, fitted to every model as standard SOUND FITTED and SOUND FITTED DELUXE versions come with a pre-installed Zimo MS450P22 DCC Sound Decoder in the Master unit and a Zimo MN330P22 Loco Decoder in the Slave Unit Sound files produced specifically for the Bachmann Branchline Class 13 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied

Bachmann Class 13 13003 BR Blue - DCC Sound Fitted

Bachmann Branchline OO Scale Era 7 Pristine BR Blue livery Running No. 13003 OLEO Buffers (Master unit, cab end only) / LMS Pattern Buffers (Master unit radiator end, and Slave unit) SOUND FITTED – Fitted with a Zimo MS450P22 DCC Sound Decoder (Master unit) and a Zimo MN330P22 Loco Decoder (Slave unit) – See below for the function list Length 244mm   BACHMANN BRANCHLINE CLASS 13 SPECIFICATION EACH CLASS 13 COMPRISES 1x MASTER UNIT AND 1x SLAVE UNIT, BOTH OF WHICH ARE MOTORISED AND FULLY FUNCTIONAL MECHANISM (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at the cab end of the Master unit and the radiator end of the Slave unit Master and Slave units connect with a rigid coupling bar that fits into NEM362 coupling pockets mounted to integral close coupling mechanisms Auto-Release Couplings fitted at the cab end of the master unit and the radiator end of the slave unit – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater DETAILING (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT, WHERE APPLICABLE): Precision moulded bodyshell and frames/running board with numerous separately fitted parts including footsteps, bonnet grilles and lamp irons Separately applied metal detail parts, including sand boxes and sand pipes, grab handles, windscreen wipers, light conduits and lifting points Authentic outside-framed running gear Frames constructed from multiple components, including separate springs and brake gear allowing full relief detailing Sprung metal buffers Cab interior detailing which includes the control desk, instruments & dials, equipment cabinets and handbrake, all with era-specific decoration Each model supplied with a full set of decorated bufferbeam pipework, master-to-slave pipes and cables, bufferbeam infills and accessory parts including screw-link couplings (cosmetic) LIGHTING – MASTER UNIT: Four fully operational marker lights on the cab end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Master and Slave unit), or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control All marker lights on the Master unit can be turned on/off independent of the Slave unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application Lights fitted to the radiator end are prototypically non-functional LIGHTING – SLAVE UNIT: Four fully operational marker lights on the radiator end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Slave and Master unit), or using an easy access microswitch on Analogue control All marker lights on the Slave unit can be turned on/off independent of the Master unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application DCC (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Plux22 DCC decoder interface Easy-access DCC decoder socket via a removable roof panel – secured by clips for ensured fit and alignment 2-pin connector wire for use between the Master and Slave units to ensure full DCC-functionality Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) SOUND: Two quality speakers employed for optimum sound reproduction, one in the Master unit and one in the Slave unit, fitted to every model as standard SOUND FITTED and SOUND FITTED DELUXE versions come with a pre-installed Zimo MS450P22 DCC Sound Decoder in the Master unit and a Zimo MN330P22 Loco Decoder in the Slave Unit Sound files produced specifically for the Bachmann Branchline Class 13 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied LIVERY APPLICATION: Authentic liveries applied to all models Multiple paint applications employed on each model using BR specification colours Logos, numerals and text added as appropriate using multi-stage tampo printing process, incorporating authentic typefaces, logos and colours SOUNDS F0 - Directional Lights - On / Off (plus Light Switch Sound) F1 - Sound On/Off F2 - Brake F3 - Whistle Toot F4 - Horn F5 - Light Engine Mode/Cold Start (engage F5 before turning F1 On) F6 - Coasting / Engine Idle F7 - Speed Lock F8 - Exhauster (Vacuum Train Brakes) F9 - Flange Squeal (Speed Related) F10 - Guard’s Whistle F11* - Auto-Release Coupling Sequence - Radiator End (Slave Unit) F12* - Auto-Release Coupling Sequence - Cab End (Master Unit) F13 - Buffer Clash F14 - Sanders F15 - Handbrake F16 - Fuel Transfer Pump F17 - Auto Wagon Buffering F18 - Shunting Lights (Master Unit and Slave Unit) F19 - Fade All Sounds F20 - All Radiator End (Slave Unit) Directional Lights Off F21 - All Cab End (Master Unit) Directional Lights Off F22 - Cab Light (Master Unit) F23 - Compressor F24 - On - “I'm Going Under” / Off - “Clear” F25 - Automatic Drain Trap F26 - On - Cab Door Opening / Off - Cab Door Closing F27 - Volume Down F28 - Volume Up *Uncoupling Sequence operates the Auto-Release Couplings, including the movement of the locomotive to release tension from the couplings, disengagement of the couplings, and the movement of the locomotive to prevent coupling up reoccurring, along with associated sound effects.

Bachmann Class 13 13003 BR Blue - Deluxe DCC Sound Fitted

Bachmann Branchline OO Scale Era 7 Pristine BR Blue livery Running No. 13003 OLEO Buffers (Master unit, cab end only) / LMS Pattern Buffers (Master unit radiator end, and Slave unit) SOUND FITTED – Fitted with a Zimo MS450P22 DCC Sound Decoder (Master unit) and a Zimo MN330P22 Loco Decoder (Slave unit) – See below for the function list Length 244mm   BACHMANN BRANCHLINE CLASS 13 SPECIFICATION EACH CLASS 13 COMPRISES 1x MASTER UNIT AND 1x SLAVE UNIT, BOTH OF WHICH ARE MOTORISED AND FULLY FUNCTIONAL MECHANISM (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at the cab end of the Master unit and the radiator end of the Slave unit Master and Slave units connect with a rigid coupling bar that fits into NEM362 coupling pockets mounted to integral close coupling mechanisms Auto-Release Couplings fitted at the cab end of the master unit and the radiator end of the slave unit – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater DETAILING (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT, WHERE APPLICABLE): Precision moulded bodyshell and frames/running board with numerous separately fitted parts including footsteps, bonnet grilles and lamp irons Separately applied metal detail parts, including sand boxes and sand pipes, grab handles, windscreen wipers, light conduits and lifting points Authentic outside-framed running gear Frames constructed from multiple components, including separate springs and brake gear allowing full relief detailing Sprung metal buffers Cab interior detailing which includes the control desk, instruments & dials, equipment cabinets and handbrake, all with era-specific decoration Each model supplied with a full set of decorated bufferbeam pipework, master-to-slave pipes and cables, bufferbeam infills and accessory parts including screw-link couplings (cosmetic) LIGHTING – MASTER UNIT: Four fully operational marker lights on the cab end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Master and Slave unit), or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control All marker lights on the Master unit can be turned on/off independent of the Slave unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application Lights fitted to the radiator end are prototypically non-functional LIGHTING – SLAVE UNIT: Four fully operational marker lights on the radiator end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Slave and Master unit), or using an easy access microswitch on Analogue control All marker lights on the Slave unit can be turned on/off independent of the Master unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application DCC (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Plux22 DCC decoder interface Easy-access DCC decoder socket via a removable roof panel – secured by clips for ensured fit and alignment 2-pin connector wire for use between the Master and Slave units to ensure full DCC-functionality Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) SOUND: Two quality speakers employed for optimum sound reproduction, one in the Master unit and one in the Slave unit, fitted to every model as standard SOUND FITTED and SOUND FITTED DELUXE versions come with a pre-installed Zimo MS450P22 DCC Sound Decoder in the Master unit and a Zimo MN330P22 Loco Decoder in the Slave Unit Sound files produced specifically for the Bachmann Branchline Class 13 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied LIVERY APPLICATION: Authentic liveries applied to all models Multiple paint applications employed on each model using BR specification colours Logos, numerals and text added as appropriate using multi-stage tampo printing process, incorporating authentic typefaces, logos and colours SOUNDS F0 - Directional Lights - On / Off (plus Light Switch Sound) F1 - Sound On/Off F2 - Brake F3 - Whistle Toot F4 - Horn F5 - Light Engine Mode/Cold Start (engage F5 before turning F1 On) F6 - Coasting / Engine Idle F7 - Speed Lock F8 - Exhauster (Vacuum Train Brakes) F9 - Flange Squeal (Speed Related) F10 - Guard’s Whistle F11* - Auto-Release Coupling Sequence - Radiator End (Slave Unit) F12* - Auto-Release Coupling Sequence - Cab End (Master Unit) F13 - Buffer Clash F14 - Sanders F15 - Handbrake F16 - Fuel Transfer Pump F17 - Auto Wagon Buffering F18 - Shunting Lights (Master Unit and Slave Unit) F19 - Fade All Sounds F20 - All Radiator End (Slave Unit) Directional Lights Off F21 - All Cab End (Master Unit) Directional Lights Off F22 - Cab Light (Master Unit) F23 - Compressor F24 - On - “I'm Going Under” / Off - “Clear” F25 - Automatic Drain Trap F26 - On - Cab Door Opening / Off - Cab Door Closing F27 - Volume Down F28 - Volume Up *Uncoupling Sequence operates the Auto-Release Couplings, including the movement of the locomotive to release tension from the couplings, disengagement of the couplings, and the movement of the locomotive to prevent coupling up reoccurring, along with associated sound effects.

Bachmann Class 13 D4502 BR Green (Wasp Stripes)

Bachmann Branchline OO Scale Era 6 Pristine BR Green (Wasp Stripes) livery Running No. D4502 LMS Pattern Buffers Equipped with two Plux22 DCC Decoder Sockets – recommended Decoder item No. 36-570B (x2) Length 244mm   BACHMANN BRANCHLINE CLASS 13 SPECIFICATION EACH CLASS 13 COMPRISES 1x MASTER UNIT AND 1x SLAVE UNIT, BOTH OF WHICH ARE MOTORISED AND FULLY FUNCTIONAL MECHANISM (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at the cab end of the Master unit and the radiator end of the Slave unit Master and Slave units connect with a rigid coupling bar that fits into NEM362 coupling pockets mounted to integral close coupling mechanisms Auto-Release Couplings fitted at the cab end of the master unit and the radiator end of the slave unit – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater DETAILING (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT, WHERE APPLICABLE): Precision moulded bodyshell and frames/running board with numerous separately fitted parts including footsteps, bonnet grilles and lamp irons Separately applied metal detail parts, including sand boxes and sand pipes, grab handles, windscreen wipers, light conduits and lifting points Authentic outside-framed running gear Frames constructed from multiple components, including separate springs and brake gear allowing full relief detailing Sprung metal buffers Cab interior detailing which includes the control desk, instruments & dials, equipment cabinets and handbrake, all with era-specific decoration Each model supplied with a full set of decorated bufferbeam pipework, master-to-slave pipes and cables, bufferbeam infills and accessory parts including screw-link couplings (cosmetic) LIGHTING – MASTER UNIT: Four fully operational marker lights on the cab end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Master and Slave unit), or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control All marker lights on the Master unit can be turned on/off independent of the Slave unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application Lights fitted to the radiator end are prototypically non-functional LIGHTING – SLAVE UNIT: Four fully operational marker lights on the radiator end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Slave and Master unit), or using an easy access microswitch on Analogue control All marker lights on the Slave unit can be turned on/off independent of the Master unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application DCC (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Plux22 DCC decoder interface Easy-access DCC decoder socket via a removable roof panel – secured by clips for ensured fit and alignment 2-pin connector wire for use between the Master and Slave units to ensure full DCC-functionality Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only

Hornby Railroad: Class 31 31271 'Stratford' Triple Grey Construction

Railroad: Class 31 31271 'Stratford 1840 - 2001' Triple Grey Construction This Hornby RailRoad Class 31 model is presented in the Trainload construction livery, bringing a modern splash of colour to your 00-gauge layout. Based on the reliable Brush Type 2 locomotives, this model features wide-tension lock couplings and moulded plastic. DCC ready, it comes fitted with a 21-pin decoder socket, allowing for easy digital upgrade. History: Originally introduced in the late 1950s, the Class 31s became a familiar sight across the British railway network, known for their versatility and longevity. Locomotive No. 31271, preserved in working order, has seen continued use in the modern era and now wears the vibrant Trainload Construction livery — a striking nod to its role in supporting infrastructure projects across the capital. - OO Scale

Hornby Railroad: Class 37 37418 'An Comunn Gaidhealach' Loram (SF)

Railroad: Class 37 37418 'An Comunn Gaidhealach' Loram (Sound Fitted) Finished in the Loram livery, Class 37 No. 37418 ‘An Commun Gaidhealach’ is brought to life in this detailed 00 gauge model.  Fitted with Hornby’s HM7000 21-pin sound decoder it delivers realistic, immersive audio straight from the box and is compatible with DCC and HM7000 App control.  As part of our RailRoad range, this model has been designed with fewer delicate detail parts and more durable detailing, making it better for handling - perfect for beginners or for adding to your existing collection! History: Released into BR traffic from Vulcan Foundry as D6971 on 18 March 1965, this locomotive was first allocated to Cardiff Canton. It was rebuilt as a Class 37/4 and renumbered 37418 in 1985 and transferred to Inverness. It received its unusual name ‘An Commun Gaidhealach’ (The Gaelic Association) at Edinburgh in October 1986, before entering the Provincial General Pool from January 1989.  It was renamed ‘Pectindae’ in April 1992, and then ‘East Lancashire Railway’ in April 1994, eventually being sold to a private owner in 2007 by EWS. It is currently on-hire to freight operator Loram Rail and painted in its livery, the ‘An Commun Gaidhealach’ name being reinstated in February 2024. - OO Scale

Hornby Railroad: Class 37 37419 'Carl Haviland' DRS Compass (SF)

Railroad: Class 37 37419 'Carl Haviland' DRS Compass (Sound Fitted) This sound-fitted Hornby RailRoad Class 37 No. 37419 ‘Carl Haviland’ is presented in Direct Rail Services livery complete with commemorative nameplate. Equipped with a 21-pin decoder preloaded with authentic Class 37 sound profiles, it delivers rich, immersive audio straight from the box.  Detail highlights include separately fitted plastic buffers, NEM tension lock couplings, and an accessory bag for added customisation. Designed to run on second radius curves or greater, this model combines performance, presentation, and sound in one standout locomotive. History: This locomotive entered service with BR in 1965 as D6991 allocated to Cardiff Canton, but was renumbered to 37291 in March 1974. It was rebuilt as a Class 37/4 and renumbered 37419 in 1985 and transferred to Scotland, entering the Provincial General Pool at inverness in 1989.  Reallocated to Thornaby as part of the Railfreight Construction sub-sector the following year, after many moves and sector allocations, it passed via EWS to Direct Rail Services in 2011. Since 2019 it has carried InterCity mainline livery and was named ‘Carl Haviland 1954-2012’.  - OO Scale

Hornby Railroad: Class 47 47306 'The Sapper' Railfreight Distribution

Railroad: Class 47 47306 'The Sapper' Railfreight Distribution A striking and authentic addition to any diesel-era collection, the R30440 Railfreight Distribution Class 47 Co-Co 47306 ‘The Sapper’ is finished in the Railfreight Distribution livery. This detailed model includes separately fitted plastic buffers and NEM coupling pockets. It comes equipped with a 21-pin DCC decoder socket, making it easy to upgrade for digital operation. - 21 pin DCC ready - OO Scale

Hornby Railroad: Class 31 31271 'Stratford' Construction (Sound Fitted)

Railroad: Class 31 31271 'Stratford 1840 - 2001' Triple Grey Construction (Sound Fitted) This Hornby RailRoad Class 31 model is presented in the Trainload construction livery, bringing a modern splash of colour to your 00-gauge layout. Based on the reliable Brush Type 2 locomotives, this model features wide-tension lock couplings and moulded plastic. DCC ready, it comes fitted with a 21-pin decoder socket, allowing for easy digital upgrade. History: Originally introduced in the late 1950s, the Class 31s became a familiar sight across the British railway network, known for their versatility and longevity. Locomotive No. 31271, preserved in working order, has seen continued use in the modern era and now wears the vibrant Trainload Construction livery — a striking nod to its role in supporting infrastructure projects across the capital. - OO Scale

Hornby Class 67 67015 DB Cargo "Leading the Next Generation"

Class 67 67015 DB Cargo "Leading the Next Generation of Rail Freight" This Class 67 No. 67015 model is finished in the vibrant DB Schenker red livery, reflecting its current use on premium services with Transport for Wales. Fitted with a 21-pin decoder socket, it is DCC ready for easy digital conversion. Sprung metal buffers and NEM couplings provide enhanced realism. With its powerful modern profile and push-pull capability, 67015 makes an ideal addition to any contemporary diesel or mixed-traffic collection. History: Thirty of these locomotives were built for EWS by Alstom in Spain in 1999/2000 as replacements for Class 47s, for use mainly on Royal Mail trains, but after mail contracts were lost in 2003/4 have been used on passenger trains.Transferred to DB Cargo by 2015, 67015 spent a period on lease to Wrexham & Shropshire trains and was named ‘David J. Lloyd’.  It is now one of a dozen leased to Transport for Wales for its premium services, currently running in DB Schenker red, and can be used in push-pull mode with Mk4 coaches and a DVT (Driving Van Trailer). - OO Scale

Hornby BR Class 153 153360 Serco Northern Rail

BR Class 153 153360 Serco Northern Rail The Hornby Class 153 No. 153360 is finished in the distinctive Northern Rail livery, representing its appearance during regular service in the north of England. It is DCC ready with a 21-pin decoder socket for easy digital upgrade and fitted with NEM couplings. History: The Northern Rail franchise commenced in December 2004 and inherited its fleet from those of Arriva Trains Northern and First North Western, including a large number of Class 153 single units, of which No. 153360 was one.  Under Northern Rail, the unit saw considerable use in the Carlisle area, including services on the Settle and Carlisle line and the Cumbria coastal line to Barrow-in-Furness.  Arriva Rail North, Northern Rail’s successor from 2016, operated the largest fleet of Class 153 units in the UK. No. 153360 went into storage in late 2021 and was subsequently scrapped. - OO Scale

Hornby LNER Class J52 68846 BR Lined Black (Late)

LNER Class J52 68846 BR Lined Black (Late) Common J13/J52 Features: New Tooling - High detail OO Gauge model based on extensive research and original works drawings. Diecast Boiler, Chassis and Running Plate. Model Weight is 235 grams. High detail cab and fully decorated backhead with decorated instrument dials. Decoder controlled firebox flicker. (decoder sold separately). HM7000 21-Pin sound decoder compatible. HM7000 Power Bank compatible. Powerful 5 Pole Skew wound motor. Pogo pin wheel pickup arrangement for easy pickup servicing. Diecast connecting rods. Prototypical size metal handrails with brass stanchions. Oilite main drive bearings. Opening cab roof vent. Sprung metal buffers. Front and Rear NEM coupling pocket. Rear coupling pocket had a close coupling mechanism. Wheel pickups on all wheels. Accessory bag contains vacuum pipes, lamps and couplings. Separately fitted lamps. Lamp code can be changed. Separately fitted simulated coal load. History: This locomotive entered service as one of Henry Ivatt’s ‘J13’ Class as No. 1247, having been built under contract by Sharp, Stewart in 1899. It became LNER ‘J52’ 4247 at the Grouping in 1923, and later 8846 under the LNER’s 1946 renumbering scheme.  It entered BR service as 68846 and was withdrawn from King’s Cross ‘Top Shed’ in May 1959, at which point it became the first preserved locomotive to be bought directly from BR when it was acquired by Captain W.G. Smith. It is now part of the National Collection and restored as GNR 1247. - OO Scale

Hornby LMS Patriot Class 45540 'Sir Robert Turnbull' BR Green (Early)

LMS Patriot Class 45540 'Sir Robert Turnbull' BR Green (Early) This model of BR ‘Patriot’ Class 4-6-0 No. 45540 ‘Sir Robert Turnbull’ is presented in its post-rebuild condition, reflecting its appearance under British Railways ownership. DCC ready with a 21-pin decoder socket, the locomotive is designed with metal sprung buffers and NEM tension lock couplers. History: This locomotive started out as 5901 when it emerged from Crewe Works in August 1933, but was later renumbered to 5540. It was rebuilt with a Stanier taper boiler in October 1947, which promoted it from power class ‘6P’ to ‘7P’. It became 45540 under BR in May 1948 and survived in service until condemned in April 1963 and was scrapped by July that year.  The locomotive’s name, transferred from withdrawn ‘Large Claughton’ 1161, was in honour of Sir Robert Turnbull, former General Manager of the LNWR, who was knighted in 1913. - OO Scale

Hornby LMS Patriot Class 5514 'Holyhead' LMS Lined Black

LMS Patriot Class 5514 'Holyhead' LMS Lined Black This Hornby model of LMS ‘Patriot’ Class 4-6-0 No. 5514 ‘Holyhead’ is finished in accurate period detail as it appeared in the late 1930s. Designed for reliable performance on OO gauge layouts, the locomotive is DCC ready with a 21-pin decoder socket and if fitted with Metal sprung buffers and NEM tension lock couplers. History: Henry Fowler designed the ‘Patriot’ 4-6-0 for the LMS as an upgrade of the LNWR’s ‘Large Claughton’ Class for express passenger work. Built at both Crewe and Derby Works, 42 and ten respectively, 52 entered service between 1930 and 1934. ‘Holyhead’ was new from Crewe in September 1932, numbered 5983, but this was changed to 5514 in August 1938, as represented by the model.  The locomotive would later be rebuilt with a Stanier taper boiler in 1947, before becoming BR 45514, with withdrawal coming at Derby in May 1961, the first of the rebuilt ‘Patriots’ to be condemned. - OO Scale

Hornby GWR Saint Class 2920 'Saint David' BR Lined Black (Early)

GWR Saint Class 2920 'Saint David' BR Lined Black (Early) Of the 77 Saint Class members built by GWR between 1902 and 1913, 2920 ‘Saint David’ was one of the 47 that survived beyond nationalisation of Britain’s railways in 1948. Part of the third batch of 20 to be built in 1907, the locomotive was new to Cardiff Canton shed. It underwent several changes during its career, including the fitting of a superheated boiler in 1909 and outside steam pipes in December 1932. This model is presented in BR livery, the condition in which it operated through to its withdrawal in October 1953, by which point it was one of the last four still in service. This model was developed with the helpful guidance from the Didcot Railway Center who kindly gave us access to their archive of drawings and access to the Lady of Legend locomotive. The Saint class model features a powerful 5 pole skew wound motor, flickering firebox and is designed to be fully compatible with the HM7000 21-Pin decoder for full DCC and sound control. Details Specific to R30403: Running number 2920 BR Black livery. Riveted Churchward Tender Later style curved frame chassis design. Fluted diecast piston rods. Tapered superheated boiler Later Chimney Design Later safety Valve with Top Feeds Common Saint Class Features Features: Diecast Chassis and Running Plate. Model Weight is 341 grams. High detail cab and fully decorated backhead with decorated instrument dials. Etched metal nameplates HM7000 21-Pin sound decoder compatible. HM7000 Power Bank compatible. Powerful 5 Pole Skew wound motor. Illuminated flickering firebox. Quick release locomotive to tender connector. Pogo pin wheel pickup arrangement for easy pickup servicing. Electrical pickups on main drive wheels and tender wheels. Diecast Piston Rods & valve gear. Fully decorated crew figures. Prototypical size metal handrails with brass stanchions. Brass main drive bearings. Sprung metal buffers. Front and Rear NEM coupling pocket. Separately fitted lamps. Lamp code can be changed. Separately fitted simulated coal load. - OO Scale

Hornby LNER Class A4 60016 'Silver King' BR (Early) Green (TT)

The LNER Gresley A4 is one of the most iconic express locomotives in Great Britain, with its streamlined casing a classic symbol of the attitude towards speed and design in the 1930s, which saw increased competition to the railways from road and air travel. The LNER Board knew that they had to make travel between the major cities faster, comfortable and more reliable. Nigel Gresley, the LNER's Chief Mechanical Officer, travelled on the Fliegende Hamburger diesel locomotive in Germany and was impressed by its streamlining, although he realized it was only efficient at high speeds. Gresley was certain that a modified A3 Pacific, with streamlining, could haul greater loads than other locomotives at the same speed or faster and a series of trials were conducted to confirm the A3's suitability. With the trials successfully completed, the LNER Board gave Gresley the go-ahead to create the "Silver Jubilee" streamlined trains, the first of the new streamlined A4s.The streamlining of the A4s' steam circuit, higher boiler pressure and extension of the firebox to create a combustion chamber made them more efficient than the A3 as they consumed less coal and water- especially later on when they were also fitted with a Kylchap double chimney. This improved their free steaming capabilities further. Their streamlined design not only made them capable of high speeds, but created an up draught of smoke, obscuring the driver's vision, a major problem on the new Class A4 engines. The story goes that during wind tunnel testing, after several unsuccessful efforts to get the smoke to lift clear, a thumbprint was inadvertently left on the clay model just behind the chimney. This succeeded in clearing the smoke and was incorporated into the final design. 2511 Silver King was the 3rd A4 locomotive to be built, designed to pull the Silver Jubilee service. The locomotive entered service in November 1935 in the unique LNER Silver livery designed for the service. The locomotive would go on to work under BR before being scrapped in 1965, making it one of the longest serving A4 locomotives. - NEXT 18 DCC Decoder Socket - TT:120 Scale

Hornby LNER Class A3 60078 'Night Hawk' BR (Early) Green (TT)

While the A1 was a fantastic locomotive that served its purpose as intended, it became clear reasonably quickly that some modifications could be made that would greatly improve its performance. These modifications however were too significant to avoid reclassifying the locomotives and as such the A1 Felstead 2743 was the first to be withdrawn from service only a handful of years after it was introduced, emerging from its shed in August 1928 as the first A3 ‘Super Pacific.’ The newly designated A3 locomotives had an improved boiler, larger cylinders and a conversion from right to left hand drive. 27 of the class were built as A3 locomotives from the get go, with all of the in service A1 examples being converted before 1950, the last such example to undergo this transformation was the then BR numbered 60068 Sir Visto. Night Hawk first entered LNER service on the fairly pleasing 24th October 1924 as locomotive number 2577 as an A1 locomotive. Rebuilt in January 1944 to an A3, the locomotive would go in to be numbered 78, and then 60078 under BR. Night Hawk would go on to be withdrawn on the 22nd October 1962, almost making it a nice round 38 years in service, before being scrapped at Doncaster in 1963. - NEXT 18 DCC Decoder Socket - TT:120 Scale

Gaugemaster Collection Class 73 '73123' "Gatwick Express" BR InterCity Executive (N)

Class 73 '73123' "Gatwick Express" BR InterCity Executive These Locomotives were produced for the 1955 modernisation plan and were used for various jobs around the southern region including parcel and freight trains. As they could reach speeds of up to 80mph they were also used on quite a few passenger services. The class 73 was designed so that it could run on the southern region’s 650/750v DC third rail or using its own on-board diesel engine which meant it could operate on non-electrified routes. A total number of 49 Class 73’s were built between 1962 and 1967 and most of them can still be seen running up and down the southern region, a few were painted in Network Rail Yellow and used for track testing and maintenance but most of them were preserved on railways such as the Dean Forest Railway. Features: Gaugemaster Limited Edition Detailed body with etched grills and separately fitted hand rails Darkened wheels and pin point bearings 5 Pole motor for smoother operation 6-Pin DCC Decoder Socket All wheel drive All Wheel pick up Directional lighting NEM couplings Includes both standard and knuckle couplings Includes spares bag with additional detailing parts - N Scale

Gaugemaster Collection Class 73 '73126' BR Large Logo Blue (N)

Class 73 '73126' BR Large Logo Blue These Locomotives were produced for the 1955 modernisation plan and were used for various jobs around the southern region including parcel and freight trains. As they could reach speeds of up to 80mph they were also used on quite a few passenger services. The class 73 was designed so that it could run on the southern region’s 650/750v DC third rail or using its own on-board diesel engine which meant it could operate on non-electrified routes. A total number of 49 Class 73’s were built between 1962 and 1967 and most of them can still be seen running up and down the southern region, a few were painted in Network Rail Yellow and used for track testing and maintenance but most of them were preserved on railways such as the Dean Forest Railway. Features: Gaugemaster Limited Edition Detailed body with etched grills and separately fitted hand rails Darkened wheels and pin point bearings 5 Pole motor for smoother operation 6-Pin DCC Decoder Socket All wheel drive All Wheel pick up Directional lighting NEM couplings Includes both standard and knuckle couplings Includes spares bag with additional detailing parts - N Scale

Gaugemaster Collection Class 73 '73235' Intercity Swallow (N)

Class 73 '73235' Intercity Swallow These Locomotives were produced for the 1955 modernisation plan and were used for various jobs around the southern region including parcel and freight trains. As they could reach speeds of up to 80mph they were also used on quite a few passenger services. The class 73 was designed so that it could run on the southern region’s 650/750v DC third rail or using its own on-board diesel engine which meant it could operate on non-electrified routes. A total number of 49 Class 73’s were built between 1962 and 1967 and most of them can still be seen running up and down the southern region, a few were painted in Network Rail Yellow and used for track testing and maintenance but most of them were preserved on railways such as the Dean Forest Railway. Features: Gaugemaster Limited Edition Detailed body with etched grills and separately fitted hand rails Darkened wheels and pin point bearings 5 Pole motor for smoother operation 6-Pin DCC Decoder Socket All wheel drive All Wheel pick up Directional lighting NEM couplings Includes both standard and knuckle couplings Includes spares bag with additional detailing parts - N Scale

Gaugemaster Collection Class 73 'E6039' BR Electric Blue (N)

Class 73 'E6039' BR Electric Blue These Locomotives were produced for the 1955 modernisation plan and were used for various jobs around the southern region including parcel and freight trains. As they could reach speeds of up to 80mph they were also used on quite a few passenger services. The class 73 was designed so that it could run on the southern region’s 650/750v DC third rail or using its own on-board diesel engine which meant it could operate on non-electrified routes. A total number of 49 Class 73’s were built between 1962 and 1967 and most of them can still be seen running up and down the southern region, a few were painted in Network Rail Yellow and used for track testing and maintenance but most of them were preserved on railways such as the Dean Forest Railway. Features: Gaugemaster Limited Edition Detailed body with etched grills and separately fitted hand rails Darkened wheels and pin point bearings 5 Pole motor for smoother operation 6-Pin DCC Decoder Socket All wheel drive All Wheel pick up Directional lighting NEM couplings Includes both standard and knuckle couplings Includes spares bag with additional detailing parts - N Scale

Bachmann Class 66/8 66847 'Terry Baker' Colas Rail Freight (SFD)

Class 66/8 66847 'Terry Baker' Colas Rail Freight (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Colas Rail Freight livery Running No. 66847 Named ‘Terry Baker’ Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original ‘Bug-Eye’ Light Clusters (2-Lamps, Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/8 66850 'David Maidment OBE' Colas Rail Freight

Class 66/8 66850 'David Maidment OBE' Colas Rail Freight The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Colas Rail Freight livery Running No. 66850 Named ‘David Maidment OBE’ Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original ‘Bug-Eye’ Light Clusters (2-Lamps, Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/8 66850 'David Maidment OBE' Colas Rail Freight (SF)

Class 66/8 66850 'David Maidment OBE' Colas Rail Freight (Sound Fitted) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Colas Rail Freight livery Running No. 66850 Named ‘David Maidment OBE’ Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original ‘Bug-Eye’ Light Clusters (2-Lamps, Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/8 66850 'David Maidment OBE' Colas Rail Freight (SFD)

Class 66/8 66850 'David Maidment OBE' Colas Rail Freight (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Colas Rail Freight livery Running No. 66850 Named ‘David Maidment OBE’ Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original ‘Bug-Eye’ Light Clusters (2-Lamps, Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/7 66761 'Wensleydale Railway Association' GBRf (SF)

Class 66/7 66761 'Wensleydale Railway Association' GBRf Europorte (Sound Fitted) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine GBRf ‘Europorte’ livery Running No. 66761 Named ‘Wensleydale Railway Association’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof and Modern Communication Pod Fitted 2 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Wrap-Around Control Panels Revised Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/7 66761 'Wensleydale Railway Association' GBRf (SFD)

Class 66/7 66761 'Wensleydale Railway Association' GBRf Europorte (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine GBRf ‘Europorte’ livery Running No. 66761 Named ‘Wensleydale Railway Association’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof and Modern Communication Pod Fitted 2 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Wrap-Around Control Panels Revised Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/7 66761 'Wensleydale Railway Association'GBRf Europorte

Class 66/7 66761 'Wensleydale Railway Association' GBRf Europorte The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine GBRf ‘Europorte’ livery Running No. 66761 Named ‘Wensleydale Railway Association’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof and Modern Communication Pod Fitted 2 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Wrap-Around Control Panels Revised Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/7 66777 'Annette' GBRf Europorte

Class 66/7 66777 'Annette' GBRf Europorte The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine GBRf ‘Europorte’ livery Running No. 66777 Named ‘Annette’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof and Modern Communication Pod Fitted 2 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Wrap-Around Control Panels Revised Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/7 66777 'Annette' GBRf Europorte (Sound Fitted Deluxe)

Class 66/7 66777 'Annette' GBRf Europorte (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine GBRf ‘Europorte’ livery Running No. 66777 Named ‘Annette’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof and Modern Communication Pod Fitted 2 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Wrap-Around Control Panels Revised Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/7 66777 'Annette' GBRf Europorte (Sound Fitted)

Class 66/7 66777 'Annette' GBRf Europorte (Sound Fitted) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine GBRf ‘Europorte’ livery Running No. 66777 Named ‘Annette’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof and Modern Communication Pod Fitted 2 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Wrap-Around Control Panels Revised Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/8 66847 'Terry Baker' Colas Rail Freight

Class 66/8 66847 'Terry Baker' Colas Rail Freight The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Colas Rail Freight livery Running No. 66847 Named ‘Terry Baker’ Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original ‘Bug-Eye’ Light Clusters (2-Lamps, Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/3 66304 DRS Plain Blue (Sound Fitted)

Class 66/3 66304 DRS Plain Blue (Sound Fitted) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66304 ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue

Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66422 Named ‘Max Joule 1958-1999’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue (SF)

Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue (Sound Fitted)  The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66422 Named ‘Max Joule 1958-1999’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue (SFD)

Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66422 Named ‘Max Joule 1958-1999’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/5 66501 Freightliner 60 1965-2025 Orange

Class 66/5 66501 Freightliner 60 1965-2025 Orange  The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. Details: Pristine Freightliner 60 1965-2025 Freightliner Orange livery Running No. 66501 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Revised LED Light Clusters (2-Lamps, Small Light Boxes) Small Top Light Box with LED Light Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof 4 Cab Vents 4 Securing Lugs at each End – Widely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Angled Sandpipe Brackets Perforated Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 66/5 66501 Freightliner 60 1965-2025 Orange (SFD)

Class 66/5 66501 Freightliner 60 1965-2025 Orange (Sound Fitted Deluxe) The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. Details: Pristine Freightliner 60 1965-2025 Freightliner Orange livery Running No. 66501 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Revised LED Light Clusters (2-Lamps, Small Light Boxes) Small Top Light Box with LED Light Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof 4 Cab Vents 4 Securing Lugs at each End – Widely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Angled Sandpipe Brackets Perforated Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 66/5 66501 Freightliner 60 1965-2025 Orange (Sound Fitted)

Class 66/5 66501 Freightliner 60 1965-2025 Orange (Sound Fitted)  The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. Details: Pristine Freightliner 60 1965-2025 Freightliner Orange livery Running No. 66501 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Revised LED Light Clusters (2-Lamps, Small Light Boxes) Small Top Light Box with LED Light Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof 4 Cab Vents 4 Securing Lugs at each End – Widely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Angled Sandpipe Brackets Perforated Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 66/5 66515 Freightliner Racing Green (Sound Fitted Deluxe)

Class 66/5 66515 Freightliner Racing Green (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Freightliner Green livery Running No. 66515 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original WIPAC Light Clusters (3-Lamps) Small Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/6 66601 Freightliner 60 1965-2025 Green

Class 66/6 66601 Freightliner 60 1965-2025 Green  The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. Details: Pristine Freightliner 60 1965-2025 Freightliner Green livery Running No. 66601 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Revised LED Light Clusters (2-Lamps, Small Light Boxes) Small Top Light Box with LED Light Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 66/6 66601 Freightliner 60 1965-2025 Green (SFD)

Class 66/6 66601 Freightliner 60 1965-2025 Green (Sound Fitted Deluxe)  The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. Details: Pristine Freightliner 60 1965-2025 Freightliner Green livery Running No. 66601 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Revised LED Light Clusters (2-Lamps, Small Light Boxes) Small Top Light Box with LED Light Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 66/6 66601 Freightliner 60 1965-2025 Green (Sound Fitted)

Class 66/6 66601 Freightliner 60 1965-2025 Green (Sound Fitted) The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. Details: Pristine Freightliner 60 1965-2025 Freightliner Green livery Running No. 66601 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Revised LED Light Clusters (2-Lamps, Small Light Boxes) Small Top Light Box with LED Light Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 66/6 66606 Freightliner Racing Green (Sound Fitted Deluxe)

Class 66/6 66606 Freightliner Racing Green (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Freightliner Green livery Running No. 66606 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original WIPAC Light Clusters (3-Lamps) Small Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/0 66096 EWS

Class 66/0 66096 EWS The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine EWS livery Running No. 66096 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original WIPAC Light Clusters (3-Lamps) Small Top Light Box Standard UK Pattern Buffers Combination Drawgear with Buckeye Couplings Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 2 Securing Lugs at each End Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Angled Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/3 66304 DRS Plain Blue

Class 66/3 66304 DRS Plain Blue The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66304 ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/3 66304 DRS Plain Blue (Sound Fitted Deluxe)

Class 66/3 66304 DRS Plain Blue (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66304 ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/0 66015 EWS

Class 66/0 66015 EWS The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine EWS livery Running No. 66015 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original WIPAC Light Clusters (3-Lamps) Small Top Light Box Standard UK Pattern Buffers Combination Drawgear with Buckeye Couplings Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 2 Securing Lugs at each End Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Angled Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Graham Farish GWR 4073 'Castle' 5015 'Kingswear Castle' BR Green Early (SF)(N)

GWR 4073 'Castle' 5015 'Kingswear Castle' BR Lined Green Early Emblem (Sound Fitted) The model that started a revolution as the first British N Scale steam locomotive to be made with SOUND FITTED, the Graham Farish ‘Castle’ has a technical specification as impressive as its good looks, with a powerful coreless motor driving the wheels through a diecast metal gearbox, all wheel pickup from the driving and tender wheels and separate metal bearings fitted to the driving wheel axles, smooth and reliable running is guaranteed. The tender houses a speaker and Next18 DCC decoder socket, making it easy to add sound, or opt for a SOUND FITTED version and the work is done for you, so you can enjoy realistic sound effects straight from the box on both Analogue and DCC. Details on this model: Pristine BR Lined Green (Early Emblem) Livery Running No. 5015 Named ‘Kingswear Castle’ Collett 4,000-gallon Tender Single Chimney Inside Cylinder Chest: Box Pattern with Straight Front Curved Cylinder Steam Pipes Tapered Buffers Horizontal Cab Side Handrail Rear Sandboxes Behind Cab Steps Short Nameplates Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 145mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater High-precision, injection-moulded bodyshell, running plate and tender with separately fitted details parts including smokebox door, lower front lamp irons, steam pipes, whistle and reverser Separately applied metal components including handrails, buffers and sand pipes Dome, filler cap, water scoop and vacuum pipe added to the tender as separate parts Tender fitted with metal coal-effect load Detailed cab interior including boiler backhead controls and gauges, brake standard and water scoop standard Hinged and posable metal fall plate between the locomotive and tender Each model supplied with a full set of accessory parts including dummy screwlink couplings and front vacuum pipe Speaker installed in the tender of all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions - N Scale

Graham Farish GWR 4073 'Castle' 5055 'Earl of Eldon' GWR Lined Green (N)

GWR 4073 'Castle' 5055 'Earl of Eldon' GWR Lined Green (GW Crest) The model that started a revolution as the first British N Scale steam locomotive to be made with SOUND FITTED, the Graham Farish ‘Castle’ has a technical specification as impressive as its good looks, with a powerful coreless motor driving the wheels through a diecast metal gearbox, all wheel pickup from the driving and tender wheels and separate metal bearings fitted to the driving wheel axles, smooth and reliable running is guaranteed. The tender houses a speaker and Next18 DCC decoder socket, making it easy to add sound, or opt for a SOUND FITTED version and the work is done for you, so you can enjoy realistic sound effects straight from the box on both Analogue and DCC. Details on this model: Pristine GWR Lined Green (GW Crest) Livery Running No. 5055 Named ‘Earl of Eldon’ Collett 4,000-gallon Tender Single Chimney Inside Cylinder Chest: Box Pattern with Curved Front Straight Cylinder Steam Pipes Tapered Buffers Horizontal Cab Side Handrail Rear Sandboxes Behind Cab Steps Short Nameplates Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 145mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater High-precision, injection-moulded bodyshell, running plate and tender with separately fitted details parts including smokebox door, lower front lamp irons, steam pipes, whistle and reverser Separately applied metal components including handrails, buffers and sand pipes Dome, filler cap, water scoop and vacuum pipe added to the tender as separate parts Tender fitted with metal coal-effect load Detailed cab interior including boiler backhead controls and gauges, brake standard and water scoop standard Hinged and posable metal fall plate between the locomotive and tender Each model supplied with a full set of accessory parts including dummy screwlink couplings and front vacuum pipe Speaker installed in the tender of all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions - N Scale

Graham Farish GWR 4073 'Castle' 5055 'Earl of Eldon' GWR Lined Green (SF) (N)

GWR 4073 'Castle' 5055 'Earl of Eldon' GWR Lined Green (GW Crest) (Sound Fitted) The model that started a revolution as the first British N Scale steam locomotive to be made with SOUND FITTED, the Graham Farish ‘Castle’ has a technical specification as impressive as its good looks, with a powerful coreless motor driving the wheels through a diecast metal gearbox, all wheel pickup from the driving and tender wheels and separate metal bearings fitted to the driving wheel axles, smooth and reliable running is guaranteed. The tender houses a speaker and Next18 DCC decoder socket, making it easy to add sound, or opt for a SOUND FITTED version and the work is done for you, so you can enjoy realistic sound effects straight from the box on both Analogue and DCC. Details on this model: Pristine GWR Lined Green (GW Crest) Livery Running No. 5055 Named ‘Earl of Eldon’ Collett 4,000-gallon Tender Single Chimney Inside Cylinder Chest: Box Pattern with Curved Front Straight Cylinder Steam Pipes Tapered Buffers Horizontal Cab Side Handrail Rear Sandboxes Behind Cab Steps Short Nameplates Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 145mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater High-precision, injection-moulded bodyshell, running plate and tender with separately fitted details parts including smokebox door, lower front lamp irons, steam pipes, whistle and reverser Separately applied metal components including handrails, buffers and sand pipes Dome, filler cap, water scoop and vacuum pipe added to the tender as separate parts Tender fitted with metal coal-effect load Detailed cab interior including boiler backhead controls and gauges, brake standard and water scoop standard Hinged and posable metal fall plate between the locomotive and tender Each model supplied with a full set of accessory parts including dummy screwlink couplings and front vacuum pipe Speaker installed in the tender of all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions - N Scale

Graham Farish Class 150/2 150232 GWR Green (FirstGroup) (N)

Class 150/2 150232 GWR Green (FirstGroup) The Class 150 Diesel Multiple Unit (DMU) is an enduring design, first introduced in 1984 much of the fleet remains in service today with operators including GWR FirstGroup. The striking green livery of GWR adorns the Graham Farish Class 150 DMU for the first time and we’ve selected 150/2 No. 150232 as the subject for this sublime N Scale model. The 150/2 sub-class is characterised by the gangway doors fitted to the cab ends, allowing two or more units to work in multiple whilst allowing access from one unit to another. Constructed from a highly detailed bodyshell which is adorned with separate components like the cab front handrails, gangway connectors and exhaust, the Graham Farish model replicates the Class 150/2 faithfully. The chassis boasts a suite of parts to depict the engine, drive train, electrical gear and auxiliary equipment, while inside the model, passenger seating is included along with cab detail. The livery application, using authentic colours and accurate typefaces and logos just enhances the model’s good looks, while the powerful and smooth drive mechanism and plug and play DCC compatibility makes the Class 150 DMU the perfect addition to any modern N scale collection. Features: Pristine GWR Green (FirstGroup) livery Running No. 150232 Comprises Car Nos. 52232 and 57232 Destination Blinds for Penzance Accessory Pack NEM Coupling Pockets Powerful 3 Pole Motor with Flywheel Interior Detailing Directional Lighting Speaker Fitted Equipped with two 6 Pin DCC Decoder Sockets – recommended Decoder 2x item No. 36-568A Length 290mm - Era 9 - N Scale

Graham Farish Class 150/2 150232 GWR Green (FirstGroup) (Sound Fitted) (N)

Class 150/2 150232 GWR Green (FirstGroup) (Sound Fitted) The Class 150 Diesel Multiple Unit (DMU) is an enduring design, first introduced in 1984 much of the fleet remains in service today with operators including GWR FirstGroup. The striking green livery of GWR adorns the Graham Farish Class 150 DMU for the first time and we’ve selected 150/2 No. 150232 as the subject for this sublime N Scale model which comes complete with SOUND FITTED. The 150/2 sub-class is characterised by the gangway doors fitted to the cab ends, allowing two or more units to work in multiple whilst allowing access from one unit to another. Constructed from a highly detailed bodyshell which is adorned with separate components like the cab front handrails, gangway connectors and exhaust, the Graham Farish model replicates the Class 150/2 faithfully. The chassis boasts a suite of parts to depict the engine, drive train, electrical gear and auxiliary equipment, while inside the model, passenger seating is included along with cab detail. The livery application, using authentic colours and accurate typefaces and logos just enhances the model’s good looks, while the powerful and smooth drive mechanism and pre-fitted DCC decoders in this SOUND FITTED model makes the Class 150 DMU the perfect addition to any modern N scale collection. Features: Pristine GWR Green (FirstGroup) livery Running No. 150232 Comprises Car Nos. 52232 and 57232 Destination Blinds for Penzance Accessory Pack NEM Coupling Pockets Powerful 3 Pole Motor with Flywheel Interior Detailing Directional Lighting SOUND FITTED – Fitted with a Zimo MX649N DCC Sound Decoder (and a Zimo MX671N DCC Decoder in the trailer vehicle) Length 290mm - Era 9 - N Scale