Peco HAA MGR Coal Hopper EWS Maroon (N)

HAA MGR Coal Hopper EWS Maroon  - N Scale

Corgi Douglas™ AC-47 Gunship 43-49770 'Spooky 71' Vietnam 1969 (1:72)

Douglas™ AC-47 Gunship 43-49770 'Spooky 71' Vietnam 1969 (1:72)   In the dark night skies over Vietnam, a terrifying new weapon had been introduced by American forces trying to protect their troops on the ground, a combination of older aeroplanes and cutting edge technology that resulted in the creation of fire spewing dragons capable of laying down 6,000 rounds of suppressing fire every minute.  The venerable Douglas C-47 Skytrain had been modified to become one of the most feared weapons of the conflict, however, ‘Spooky’ crews wouldn’t always have it their own way. On the night of 24th February 1969, the crew of gunship 43-49770 ‘Spooky 71’ had been called to provide fire support for troop under attack at Long Binh, but whilst doing so, their aircraft had taken a direct mortar round hit in the right wing, resulting in a gaping hole and the aircraft being peppered with 3,500 shrapnel holes.  The aircraft lurched violently and the fire crew were thrown off their feet, all suffering from multiple shrapnel wounds. Bleeding profusely, Airman First Class John Levitow could see one of his crewmates was in danger of falling out of the open cargo door, and fought through the pain of his wounds to drag him to a safer position.  Unfortunately, he also saw that the flare his colleague had been trying to throw out of the aircraft prior to the mortar hit had blown back into the cabin and was smoking, about to detonate. He threw his body on top of the flare and slowly ushered it towards the open door using his last reserves of strength, rolling it into the night sky seconds before it detonated.  For his heroic, selfless actions which saved both his aircraft and crewmates, John Levitow was rightfully awarded the Medal of Honor. Despite the drama and devastation in the night sky above the Long Binh US Army post, the aircraft did manage to make it back to its home base safely, where ground crews were able to assess the damage from the mortar strike, and count every one of the 3,500 shrapnel holes which peppered the wings and fuselage of the aircraft.

Corgi Hurricane IIC, Z3897 /JX-N, Bill McConnell 1 Sqn 1941(1:72)

Hurricane IIC, Z3897 /JX-N, Bill McConnell 1 Squadron 1941(1:72)   This exceptional CORGI Aviation Archive 1:72 scale diecast model showcases the legendary Hawker Hurricane Mk.IIC, the perfect addition for any dedicated aviation collector.  Ready to display straight from the box, this premium die-cast replica captures the historic Z3897/JX-N in authentic detail, complete with its distinctive nose artwork and accurate green/grey camouflage scheme.  Featuring a rotatable propeller and included display stand, this model celebrates one of the RAF's most versatile fighter aircraft of the Second World War.   Key Features: Ready to display - no assembly required Premium 1:72 scale diecast construction Rotatable propeller for authentic detail Historically accurate markings and paint scheme Includes display stand History: The Hawker Hurricane earned its legendary status during the Battle of Britain, destroying more enemy aircraft than all of Britain's other defences combined. By the summer of 1940, even as Hurricanes fought to stem the Luftwaffe tide, engineers were developing a major upgrade. The Hurricane Mk.II arrived with an uprated Merlin engine, but its thick, straight wing design meant it would find its true calling beyond traditional dogfighting roles. The Hurricane IIc variant, armed with four devastating 20mm Hispano cannons, proved highly effective in coastal anti-shipping raids and low-altitude 'Rhubarb' strikes into occupied Europe. Its powerful armament excelled against ground targets, whilst the aircraft also found success as a nightfighter and 'Hurribomber' in North Africa's desert campaigns. This particular aircraft, Z3897, gained fame through a Pathé newsreel featuring mock combat against a captured Junkers Ju88, showcasing the Hurricane's impressive manoeuvrability. The aircraft was the personal mount of Belfast-born William W. McConnell, who served with RAF No.1 Squadron from May 1941 through March 1942, becoming a noted ground attack specialist.  His Hurricane wore distinctive nose artwork that made it instantly recognisable, a testament to the personal connection between pilot and machine during those crucial wartime years.  

Rapido UK Not Quite Mink’ D.Fews Explosives No.2264

Not Quite Mink’ D.Fews Explosives No.2264 Not-quite-mink D. FEWS Explosives No. 2264 Grease axleboxes Plated-over end vents Double-sided brakes, 3 brake shoes GPV doors Spoked wheels running in metal bearings NEM coupler pockets 1:76 scale, (OO gauge) UK designed

EFE Daimler Fleetline DMS Brighton Corporation 91 Trainer (1:76)

Daimler Fleetline DMS Brighton Corporation 91 Driver Trainer The Daimler Fleetline DMS had its origins in a nationwide move towards One-Man Operation (OMO) buses in the late 1960s and early 1970s, replacing the tried-and-tested ‘driver and conductor’ crews that had been the staple for many years. London Transport (LT) was no exception, and as such began to explore the benefits that OMO might bring by trialling Leyland Atlanteans and Daimler Fleetlines. It was the latter that would go on to form the basis of an all-new London bus – the DMS. The first of the new DMSs entered service in January 1971 working on Routes 95 and 220. They were powered by Gardner 6LXB engines and bodied by Park Royal Vehicles, with full OMO considerations included. Passengers would enter through a set of double folding doors at the front, opposite the driver, and immediately pass through an Automatic Fare-Collection (AFC) turnstile (located over the nearside front wheel arch) to gain access to the seating. Exit was via a second set of doors located centrally on the nearside of the body. Building on the popularity of the ‘Routemaster’ tag, London Transport named the new type the ‘Londoner’, but it never caught on, and they were simply referred to as Fleetlines or DMSs. A total of 2,646 would be built between 1970 and 1978; the design evolving during that time, culminating in the B20 type. However, the DMS was never popular with passengers owing to the slower boarding times caused by the AFC equipment, and they proved equally unpopular with garage staff, so much so that the first started to be withdrawn the year after the last was delivered. Our new models represent those built in the first batch, identified by the narrower position of the headlights. This example represents the former DMS132 in its post-London guise as Brighton Corporation No. 91. This vehicle was acquired to serve as a driver trainer, and for many years could be seen around the south coast resort as a mobile recruitment advert. It survives today with the Bromley Bus Preservation Group. The new models are based on EFE Road’s updated Daimler Fleetline DMS tooling and feature the early style front end for the first time on an EFE DMS model. • Colours/details of final model may vary from illustration • Authentically detailed die-cast model from EFE Road • Complementary to OO scale model railways (1:76 scale)

EFE Daimler Fleetline DMS115 London Transport Route 170 (1:76)

Daimler Fleetline DMS115 London Transport Route 170 Aldwych The Daimler Fleetline DMS had its origins in a nationwide move towards One-Man Operation (OMO) buses in the late 1960s and early 1970s, replacing the tried-and-tested ‘driver and conductor’ crews that had been the staple for many years. London Transport (LT) was no exception, and as such began to explore the benefits that OMO might bring by trialling Leyland Atlanteans and Daimler Fleetlines. It was the latter that would go on to form the basis of an all-new London bus – the DMS. The first of the new DMSs entered service in January 1971 working on Routes 95 and 220. They were powered by Gardner 6LXB engines and bodied by Park Royal Vehicles, with full OMO considerations included. Passengers would enter through a set of double folding doors at the front, opposite the driver, and immediately pass through an Automatic Fare-Collection (AFC) turnstile (located over the nearside front wheel arch) to gain access to the seating. Exit was via a second set of doors located centrally on the nearside of the body. Building on the popularity of the ‘Routemaster’ tag, London Transport named the new type the ‘Londoner’, but it never caught on, and they were simply referred to as Fleetlines or DMSs. A total of 2,646 would be built between 1970 and 1978; the design evolving during that time, culminating in the B20 type. However, the DMS was never popular with passengers owing to the slower boarding times caused by the AFC equipment, and they proved equally unpopular with garage staff, so much so that the first started to be withdrawn the year after the last was delivered. Our new models represent those built in the first batch, identified by the narrower position of the headlights. This example is DMS115, which is presented in its original condition, as working on Route 170 to Aldwych circa 1971. As prototypical at the time it sports the ‘open’ style of LT roundel, and is complete with the coin in slot emblems on the front end and PAY AS YOU ENTER notifications. The new models are based on EFE Road’s updated Daimler Fleetline DMS tooling and feature the early style front end for the first time on an EFE DMS model. • Colours/details of final model may vary from illustration • Authentically detailed die-cast model from EFE Road • Complementary to OO scale model railways (1:76 scale)

EFE Daimler Fleetline DMS141 London Transport Route 46 (1:76)

Daimler Fleetline DMS141 London Transport Route 46 Farringdon Street The Daimler Fleetline DMS had its origins in a nationwide move towards One-Man Operation (OMO) buses in the late 1960s and early 1970s, replacing the tried-and-tested ‘driver and conductor’ crews that had been the staple for many years. London Transport (LT) was no exception, and as such began to explore the benefits that OMO might bring by trialling Leyland Atlanteans and Daimler Fleetlines. It was the latter that would go on to form the basis of an all-new London bus – the DMS. The first of the new DMSs entered service in January 1971 working on Routes 95 and 220. They were powered by Gardner 6LXB engines and bodied by Park Royal Vehicles, with full OMO considerations included. Passengers would enter through a set of double folding doors at the front, opposite the driver, and immediately pass through an Automatic Fare-Collection (AFC) turnstile (located over the nearside front wheel arch) to gain access to the seating. Exit was via a second set of doors located centrally on the nearside of the body. Building on the popularity of the ‘Routemaster’ tag, London Transport named the new type the ‘Londoner’, but it never caught on, and they were simply referred to as Fleetlines or DMSs. A total of 2,646 would be built between 1970 and 1978; the design evolving during that time, culminating in the B20 type. However, the DMS was never popular with passengers owing to the slower boarding times caused by the AFC equipment, and they proved equally unpopular with garage staff, so much so that the first started to be withdrawn the year after the last was delivered. Our new models represent those built in the first batch, identified by the narrower position of the headlights. This example is Abbey District’s DMS141, depicted in its early 1980s condition as working on Route 46 to Farringdon Street, complete with highly visible yellow front entrance doors. The new models are based on EFE Road’s updated Daimler Fleetline DMS tooling and feature the early style front end for the first time on an EFE DMS model. • Colours/details of final model may vary from illustration • Authentically detailed die-cast model from EFE Road • Complementary to OO scale model railways (1:76 scale)

EFE Daimler Fleetline DMS146 London Transport Route 267 (1:76)

Daimler Fleetline DMS146 London Transport Route 267 Hampton Court Stn The Daimler Fleetline DMS had its origins in a nationwide move towards One-Man Operation (OMO) buses in the late 1960s and early 1970s, replacing the tried-and-tested ‘driver and conductor’ crews that had been the staple for many years. London Transport (LT) was no exception, and as such began to explore the benefits that OMO might bring by trialling Leyland Atlanteans and Daimler Fleetlines. It was the latter that would go on to form the basis of an all-new London bus – the DMS. The first of the new DMSs entered service in January 1971 working on Routes 95 and 220. They were powered by Gardner 6LXB engines and bodied by Park Royal Vehicles, with full OMO considerations included. Passengers would enter through a set of double folding doors at the front, opposite the driver, and immediately pass through an Automatic Fare-Collection (AFC) turnstile (located over the nearside front wheel arch) to gain access to the seating. Exit was via a second set of doors located centrally on the nearside of the body. Building on the popularity of the ‘Routemaster’ tag, London Transport named the new type the ‘Londoner’, but it never caught on, and they were simply referred to as Fleetlines or DMSs. A total of 2,646 would be built between 1970 and 1978; the design evolving during that time, culminating in the B20 type. However, the DMS was never popular with passengers owing to the slower boarding times caused by the AFC equipment, and they proved equally unpopular with garage staff, so much so that the first started to be withdrawn the year after the last was delivered. Our new models represent those built in the first batch, identified by the narrower position of the headlights. This example is DMS146, another ‘open’ rondel DMS, but this time carrying the white band applied to later examples in this batch, which helped break up the wall of red. The model is depicted as working a Route 267 service to Hampton Court Station. The new models are based on EFE Road’s updated Daimler Fleetline DMS tooling and feature the early style front end for the first time on an EFE DMS model. • Colours/details of final model may vary from illustration • Authentically detailed die-cast model from EFE Road • Complementary to OO scale model railways (1:76 scale)

EFE Daimler Fleetline DMS46 London Transport Route 95 (1:76)

Daimler Fleetline DMS46 London Transport Route 95 Cannon Street The Daimler Fleetline DMS had its origins in a nationwide move towards One-Man Operation (OMO) buses in the late 1960s and early 1970s, replacing the tried-and-tested ‘driver and conductor’ crews that had been the staple for many years. London Transport (LT) was no exception, and as such began to explore the benefits that OMO might bring by trialling Leyland Atlanteans and Daimler Fleetlines. It was the latter that would go on to form the basis of an all-new London bus – the DMS. The first of the new DMSs entered service in January 1971 working on Routes 95 and 220. They were powered by Gardner 6LXB engines and bodied by Park Royal Vehicles, with full OMO considerations included. Passengers would enter through a set of double folding doors at the front, opposite the driver, and immediately pass through an Automatic Fare-Collection (AFC) turnstile (located over the nearside front wheel arch) to gain access to the seating. Exit was via a second set of doors located centrally on the nearside of the body. Building on the popularity of the ‘Routemaster’ tag, London Transport named the new type the ‘Londoner’, but it never caught on, and they were simply referred to as Fleetlines or DMSs. A total of 2,646 would be built between 1970 and 1978; the design evolving during that time, culminating in the B20 type. However, the DMS was never popular with passengers owing to the slower boarding times caused by the AFC equipment, and they proved equally unpopular with garage staff, so much so that the first started to be withdrawn the year after the last was delivered. Our new models represent those built in the first batch, identified by the narrower position of the headlights. This example is DMS46, which in 1974 was the first example to receive the white window surrounds on the upper deck, creating a very pleasing appearance. Our model depicts it as working around 1976 on Route 95 with a Cannon Street destination. The new models are based on EFE Road’s updated Daimler Fleetline DMS tooling and feature the early style front end for the first time on an EFE DMS model. • Colours/details of final model may vary from illustration • Authentically detailed die-cast model from EFE Road • Complementary to OO scale model railways (1:76 scale)

Hornby YGA Seacow EWS 980076 (TT)

YGA Seacow EWS 980076  This newly tool EWS YGA Seacow Wagon 980076 displays a striking maroon livery. It features intricate detailing such as guard rails, handwheels, catwalks, brake equipment and buffers, as well as a precision moulded bodyshell.  A mainstay of engineering trains for many years, these ballast wagons would transport and deposit fresh ballast on top of newly laid track via the chute located between the bogies, and could be seen operating with a huge variety of locomotive traction over their lifetime – from BR Blue diesels in the 70’s, to Civil Engineers ‘Dutch’ 31, 37 & 47s in the 90’s, and finally Class 66s in the privatised era.  These ‘fishy’ wagons are sure to be a staple of your TT:120 wagon pool for many years to come! Model Specification: Brand new tooling depicting Seacow and Sealion family of bogie hopper wagons Accurate body panel detailing Vast number of separate parts Die-cast chute detail for improved running capabilities Differences in body types and bogies between Seacow/Sealion catered for Kinematic NEM coupling system Minimum second radius. Livery: EWS Maroon Various printed warning labels and information panels Accurate paint colours and typefaces Semi-gloss finish - TT:120 Scale

Hornby MEA Wagon EWS 391340, 391434 & 391569 Triple Pack (TT)

MEA Wagon EWS 391340, 391434 & 391569 Triple Pack  The EWS MEA Wagon Triple Pack of models depict 4-acle open mineral wagons numbered 391340, 391434 and 391569, in EWS Maroon.  The MEA was a conversion of the HEA hopper wagon, by removing the hopper bodyshell and replacing it with an open box design with a flat base. Just like the HEA, the MEA was used to convey coal to domestic sites, as well as other bulk material like scrap or ballast. These new wagon are based on extensive research and underwent a painstaking design process, culminating in products that are highly accurate, feature numerous separately fitted parts including brake details, and include a die-cast weight for smooth running.  Often seen running in long block rakes or mixed into ‘Speedlink’ railfreight services, the MEA is perfect for late sectorisation and post-privatisation era layouts, running behind classic locos like the 37 and 66. Model Specification: Extensively researched triple pack of MEA open wagons Highly detailed Separate parts including brake equipment, underframe equipment, and buffers Die-cast weight Kinematic NEM coupling Minimum second radius. Livery: EWS Maroon Yellow lettering 2000s style yellow OHLE stickers Authentic colours and fonts Semi-gloss finish - TT:120 Scale

Hornby MEA Wagon EWS 391456 (TT)

MEA Wagon EWS 391456  The EWS MEA Wagon 391456 model depicts a 4-axle open mineral wagon and features a bold EWS Maroon livery.  The MEA was a conversion of the HEA hopper wagon, by removing the hopper bodyshell and replacing it with an open box design with a flat base. Just like the HEA, the MEA was used to convey coal to domestic sites, as well as other bulk material like scrap or ballast. This new wagon is based on extensive research and underwent a painstaking design process, culminating in a product that is highly accurate, features numerous separately fitted parts including brake details, and includes a die-cast weight for smooth running.  Often seen running in long block rakes or mixed into ‘Speedlink’ railfreight services, the MEA is perfect for late sectorisation and post-privatisation era layouts, running behind classic locos like the 37 and 66. Model Specification: Extensively researched model of MEA open wagon Highly detailed Separate parts including brake equipment, underframe equipment, and buffers Die-cast weight Kinematic NEM coupling Minimum second radius. Livery: EWS Maroon Yellow lettering 1990s style red OHLE stickers Authentic colours and fonts Semi-gloss finish - TT:120 Scale

Hornby CDA Hopper EWS 375071 (TT)

CDA Hopper EWS 375071 The CDA China clay hopper wagon model rejoins the TT:120 range in the long lasting EWS silver and maroon livery of the 2000s.  This highly detailed and colourful hopper wagon has been expertly researched and captures the unique look of the CDA well. With a wealth of separately fitted parts, crisp paint application, die-cast weight and kinematic NEM couplings, this modern image wagon will not only look good on your layout, it will run smoothly too! This model depicts No.375071 CDA Hopper Wagon in EWS maroon and silver livery. Model Specification: Extensively researched model of CDA China clay hopper wagon Highly detailed Separate parts including hand brake, canvas roof, underframe equipment, and buffers Die-cast weight Kinematic NEM coupling Minimum second radius. Livery: EWS maroon and silver St Blazey depot plaques Accurate colours and fonts Semi-gloss finish - TT:120 Scale

Hornby CDA Hopper EWS 375072, 375073, & 375074 Triple Pack (TT)

CDA Hopper EWS 375072, 375073, & 375074 Triple Pack The CDA China clay hopper wagon rejoins the TT:120 range in the long lasting EWS silver and maroon livery of the 2000s.  This highly detailed and colourful hopper wagon triple pack has been expertly researched and captures the unique look of the CDA well. With a wealth of separately fitted parts, crisp paint application, die-cast weight and kinematic NEM couplings, these modern image wagons will not only look good on your layout, they will run smoothly too! This triple pack includes No.375072, No.375073, and No.375074 CDA hopper wagon models in EWS maroon and silver livery. Model Specification: Extensively researched model of CDA China clay hopper wagon Highly detailed Separate parts including hand brake, canvas roof, underframe equipment, and buffers Die-cast weight Kinematic NEM coupling Minimum second radius. Livery: EWS maroon and silver St Blazey depot plaques Accurate colours and fonts Semi-gloss finish - TT:120 Scale

Hornby BR Class 08 08499 EWS (TT)

BR Class 08 08499 EWS  Hornby are pleased to present a further two new colourful identities of the ever-popular BR Class 08 shunting diesel engine in the April Range Launch. Featuring a diecast chassis, coreless motor, all-wheel drive, immaculate paint application and much more, this ubiquitous shunting loco is undoubtedly going to stand out on your TT:120 layout. This example depicts No.08499 in early 2000’s corporate EWS Maroon & Gold livery, whilst allocated to depots in the South-West of England. Model Specification: Highly detailed model based on extensive research and design Diecast chassis Assortment of separately fitted parts, including body grabrails, cab steps, sandpipe fillers and buffer stocks Brass coupling rods Detailed cab interior Powerful coreless motor providing power to all wheels Electrical pick-ups on all wheels Pivoting NEM coupling sockets Accessory pack that includes bufferbeam pipes Minimum 2nd radius curves Electronics: 6-Pin DCC Decoder Socket compatible with HM7000 system Livery: EWS Maroon & Gold Yellow Coupling Rods Semi-gloss finish Faithfully created using accurate colours and fonts - TT:120 Scale

Tamiya Honda CB1000F (1:12)

Honda CB1000F (1:12) Description: Tamiya is proud to announce the release of the Honda CB1000F as a new addition to our 1/12 Motorcycle Series. Honda’s CB series of road sport bikes has a long and proud history of innovation; it started with the 1959 Benly CB92 Super Sports and includes machines such as the genre-defining 1969 CB750 FOUR and its inline four engine, the DOHC 4-valve engine CB750F/900F developed for the European market, and the race-focused 1981 CB1100R. Fast forward to March 2025 and Honda announced that its existing flagship CB1300SF would be passing on the torch to the CB1000F Concept. Shortly after, in November of that year it went on sale as the CB1000F. The CB1000F’s “Best Balance Roadster” design concept demanded that it be at home in a variety of scenes from everyday use to touring.  It inherits and updates the iconic “Flowing Line” styling popularised on its CB750F/900F predecessors, the shape flowing smoothly from the tank right back to the rear cowl, via the side covers to give the bike its powerful and speedy silhouette. The round LED headlight catches the eye with its modern yet traditional design encircled by a ring-shaped light and featuring a plated rim and central section inscribed with the HONDA logo. At the rear, the seat’s surface pattern is inspired by the CB750F, and the eye is drawn to design cues like the large taillight and the muffler that dominates the right side of the bike. Some say the CB designation stands for the C in “motor cycle” and the B in “clubman,” but it could be argued that this new iteration has a C for “creative” and a B for “benchmark.” Either way, it promises hours of stress-free riding for all: another icon in a series full of them.   About the Model: This is a 1/12 scale model assembly kit. Length: 178mm, height: 73mm, height: 109mm The form and flowing lines of the Honda CB1000F are captured in style Main components such as engine, front and rear suspension, muffler and stand are attached to the frame by screws The actual bike’s metal-plated sections such as muffler, headlight, front fork inner tubes and side mirror surfaces are depicted by metal-plated parts A clear red part is included to capture the distinctive taillight, and clear parts to recreate the ring around the headlight and its surface part, LCD display, and front windshield Features realistic depictions of the liquid-cooled inline-4 engine and radiator hoses featuring mesh patterns (it is about 25 years since we released a kit depicting an uncowled engine) One-piece part authentically recreates fuel tank and front fender together to limit parting lines Chain is split into right and left halves, and finely recreates roller sections Brake disc parts have minute holes, and outer and inner discs are separate parts for easier painting Includes a metal rear damper spring, and vinyl tubing for pipes such as clutch wiring and brake hose Dedicated front and rear synthetic rubber tyres have realistic depictions of tread patterns, and the seat has authentic renderings of leather patterns Comes with masking stickers to use for metre and fuel tank cap Choose whether to use the headlight cowl, which is optional on both the full-size bike and this model  

Bachmann SSA Scrap Wagon EWS 470078 [W]

SSA Scrap Wagon EWS 470078 [W] The POA Scrap Wagons were built from new or converted from other, redundant types, during the 1980s to carry scrap metal. The open box design was loaded and unloaded using grab machines or electro-magnets and the wagons entered traffic in a bold blue and yellow colour scheme. Built by Standard Wagon and owned privately by Standard Railfreight, in 1990 British Rail purchased the fleet of 191 wagons upon which they were recoded as SSA under the Total Operations Processing System (TOPS). The Bachmann Branchline model boasts an injection moulded bodyshell with separately fitted ladders on either side. The chassis incorporates a heavy metal weight providing a low centre of gravity which, combined with the blackened metal wheelsets, ensures smooth and reliable running. Details: Weathered EWS livery Running No. 470078 Features: Length 126mm (over couplings) - OO Scale

Airfix Vintage Classics: Chieftain Tank (1:76)

Vintage Classics: Chieftain Tank  This remarkable 1:76 scale model kit of the Chieftain Tank allows you to recreate Britain's formidable Cold War defender. Comprising 105 intricately moulded plastic parts, this Skill Level 3 kit offers a rewarding experience for modellers aged 8 and up, with three genuine paint schemes available for customisation. Key Features: 1:76 scale model kit with 105 plastic components Skill Level 3 - ideal for modellers aged 8 and older Includes three genuine paint schemes Detailed depiction of the Chieftain's formidable 120mm main gun Faithfully represents the unique silhouette of Britain's main battle tank from the Cold War era History: Serving as the British Army's principal Battle Tank from the late 1960s to the 1990s, the Chieftain was designed to counter the latest Soviet heavy armour, with its firepower being a top priority. It was equipped with a powerful and highly precise 120mm gun, allowing British crews to achieve impressive first-hit accuracy during training exercises. Fortunately, this Cold War guardian never had to use its main weapon in combat.  

Airfix Westland Lysander Mk.III Special Duties (1:48)

Westland Lysander Mk.III Special Duties (1:48) Product Info: This remarkable 1:48 scale model kit of the Westland Lysander Mk.III Special Duties aircraft consists of 197 parts and provides an accurate depiction of one of the RAF's most audacious aircraft used in secret operations. Ideal for modellers aged 8 and up with intermediate skills, this kit replicates the unique alterations made to about 40 Lysander communication planes in 1941 for covert missions aiding the French Resistance. Key Features: -197 piece model kit at 1:48 scale with 316mm wingspan -Skill level 3 - suitable for intermediate modellers aged 8 years and above -Three authentic paint schemes included -Precise depiction of Special Duties modifications including external fuel tank and access ladder -World War Two era RAF aircraft -Detailed features including modified gunner's compartment with rear-sliding canopy -Represents unarmed variant configured for secret agent transport operations History: In 1941, the RAF set a requirement for the modification of around 40 Westland Lysander communication aircraft to undertake a new secretive role, termed 'Special Duties'. The aircraft were stripped of defensive weaponry and had their range extended by installing a larger internal oil tank and an external 150-gallon fuel tank beneath the fuselage. The gunner's section was altered with the addition of a rear-sliding single-piece canopy, allowing space for up to three individuals. A sturdy ladder was attached to the port-side fuselage, enabling swift boarding and disembarking for passengers during their new 'Spy Taxi' missions. Flying under the cover of night and with the assistance of the French Resistance, specialised crews courageously piloted these unarmed planes across the English Channel, transporting agents at significant personal risk to all involved. These operations were vital to the eventual success of the Second World War.  

Airfix Westland Sea King HAR.3 (Search & Rescue) (1:48)

Westland Sea King HAR.3 (Search & Rescue) (1:48) Product Info: This detailed 1:48 scale model kit brings one of Britain's most cherished Search & Rescue helicopters to your assembly table, featuring 361 precisely moulded plastic components for modellers aged 8 and up. The Westland Sea King HAR.3 was crafted specifically for the Royal Air Force's Search & Rescue missions, equipped with state-of-the-art search and navigation systems, capable of functioning in any weather, day or night. With three paint options provided, this Skill Level 4 kit enables you to construct one of the most renowned aircraft to have served in Britain's military. Key Features: -1:48 scale military aircraft kit with 361 plastic components -Includes three authentic paint options -Skill Level 4 for seasoned modellers -Highly detailed replica of the RAF Search & Rescue version -Suitable for ages 8 and up History: A pivotal aircraft of the post-war period, although Britain's Westland Helicopters eventually manufactured over 300 of the American Sea Kings, only a select few became some of the most notable aircraft to serve in Britain's military. The Sea King, known for its durability and stability, was perfectly suited for the specialised Search & Rescue role across the UK, with Westland creating several Sea Kings specifically for this purpose. Designated HAR.3 and built for the Royal Air Force, these Search & Rescue Sea Kings were equipped with cutting-edge search and navigation technology, enabling them to perform in this challenging role in any weather and at any time, day or night. Always ready in times of crisis, these yellow Sea Kings became some of the most iconic and beloved aircraft in Britain's skies, with their crews well aware of the public's admiration for them and their aircraft. If this is a machine you've long admired, then the Airfix Westland Sea King kit is surely meant for your workbench. The Westland Sea King is a product of Leonardo UK Ltd and all rights in it, including its name, are hereby reserved. The models have been produced with the permission and assistance of Leonardo MW Ltd.

Scenecraft Low Relief Station Road Newsagent (OO)

Low Relief Station Road Newsagent

Scenecraft Bus Crews and Inspector (OO)

Bus Crews and Inspector - 1:76 OO Scale

Hornby Railroad: BR Mk1 NKA 94157 "Super GUV" RES

Railroad: BR Mk1 NKA 94157 "Super GUV" RES Rail Express Services (RES) was the BR sector responsible for the transport of mail and parcels, including the Travelling Post Office. General Utility Vans (GUVs) were used in large numbers to transport mail and parcels, though some were used as newspaper vans.  These vehicles were part of the BR Mk1 coach family and 907 examples were built between 1956 and 1960 by BR at its York, Doncaster and Glasgow works. A number were also produced under contract by the Pressed Steel Company Ltd at Cowley, near Oxford. With a carrying capacity of 13.8 tons (14 tonnes) these multi-door bogie vans were versatile, some even being converted for carrying motor vehicles. Some train operating companies still use them, and a number have found further use at heritage railways.  This RailRoad RES Mk1 Super Guv model coach is a durable, detailed option for your model railway collection. - OO Scale

Hornby ZCV 'CLAM' DB973347 Dutch Departmental EWS

ZCV 'CLAM' DB973347 Dutch Departmental EWS These wagons were introduced into BR service in 1989 and utilised redundant MGR hopper wagon chassis, with new, low-sided steel bodies. ‘Clam’ wagons were used in engineering and permanent way trains for carrying ballast, spoil and sleepers. They had fixed sides and ends and were fitted with vacuum brakes. A total of 400 were built and they were given the TOPS code ‘ZCV’.  This highly detailed CLAM Wagon model makes a delightful addition to your freight model railway. - OO Scale

Hornby Railroad: Class 66 66022 'Lafarge Charnwood' EWS

Railroad: Class 66 66022 'Lafarge Charnwood' EWS Entering service in 1998, this was one of the original 250 locomotives ordered for EWS.  Funded by Locomotion Capital Ltd, it was leased to EWS until December 2008. No. 66022 was one of 60 locomotives sub-let to its Euro Cargo Rail subsidiary in France, starting in June 2006. It was then sold by to Angel Trains, who leased it to DB Schenker Rail UK, but the locomotive remained in service in France, returning to the UK for heavy maintenance when required via the Channel Tunnel. Today it is part of the DB Cargo fleet.  Our RailRoad model faithfully replicates this Class 66 locomotive, with an emphasis on durability for regular model railway use. - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: Class 66 66022 'Lafarge Charnwood' EWS (Sound Fitted)

Railroad: Class 66 66022 'Lafarge Charnwood' EWS (Sound Fitted) Entering service in 1998, this was one of the original 250 locomotives ordered for EWS. Funded by Locomotion Capital Ltd, it was leased to EWS until December 2008.  No. 66022 was one of 60 locomotives sub-let to its Euro Cargo Rail subsidiary in France, starting in June 2006. It was then sold to Angel Trains, who leased it to DB Schenker Rail UK, but the locomotive remained in service in France, returning to the UK for heavy maintenance when required via the Channel Tunnel. Today it is part of the DB Cargo fleet.  Our RailRoad replica model is a faithful representation of the Class 66 locomotive, with added durability and pre-fitted with a DCC sound chip for extra authenticity. - OO Scale

Hornby Railroad: BR Class 60 60038 'Avesta Polarit' EWS (Sound Fitted)

Railroad: BR Class 60 60038 'Avesta Polarit' EWS (Sound Fitted) A growth in demand in the heavy haulage sector led to a review of BR’s available motive power in the 1980s. With 185 locomotives of the Type 5, 3,000+ horsepower category available, made up of its Classes 56 and 58, it was clear that more would be needed, and BR put out an invitation to tender for new locomotives in 1987.  The 100 locomotive order was awarded to Brush in Loughborough, and these entered service between 1989 and 1993. No.60038 was named ‘Bidean nam Bian’ after the Scottish ‘Munro’ in Glen Coe.  With BR’s trainload freight business broken up into shadow franchises, the locomotive became part of Loadhaul, based in the north-east. By 1996, this had become part of EWS and 60038 was named 'Avesta Polarit' after the steel making company at the DFDS Immingham sea terminal on 19th March 2002. It is now one of 14 owned by DC Rail and currently in store.  Our detailed RailRoad replica Class 60 model retains all the charm of the original, with enhanced durability and pre-fitted DCC sound features. Product features: Design based on extensive research and original drawings HM7000-21 Pin decoder compatible Space for a additional R7408 Enhanced Bass Speaker Working directional lights All wheel electrical pickup NEM couplings Brass axle bearings Separately fitted handrails, horns and exhaust - DCC HM7000 TXS Sound Fitted - OO Scale

Hornby Railroad: BR Class 60 60069 'Humphrey Davy' (Sound Fitted)

Railroad: BR Class 60 60069 'Humphrey Davy' Coal Sector (Sound Fitted)  The Class 60s were the last heavy haulers built for BR. No.60069 was allocated to BR’s Train Load Freight (TLF) Coal Sector and named ‘Humphrey Davy’, in honour of the inventor of the miner’s safety lamp.  Following the break-up of TLF, the Class 60s were divided between three of the shadow franchises: Mainline Freight, Loadhaul, and Transrail Freight, but not long after they were formed they were absorbed into English, Welsh & Scottish (EWS). By 2007, it was estimated that the operational fleet was down to just 60 locomotives, the rest either in store or undergoing repair. That year, EWS was acquired by DB Schenker, a wholly-owned subsidiary of German railway company, Deutche Bahn.  Our RailRoad Class 60 model represents 'Humphrey Davy' in detail, but with added features that make for a much more durable locomotive. Plus, it is pre-fitted with a DCC sound chip for the most authentic model railway experience. Product features: Design based on extensive research and original drawings HM7000-21 Pin decoder compatible Space for a additional R7408 Enhanced Bass Speaker Working directional lights All wheel electrical pickup NEM couplings Brass axle bearings Separately fitted handrails, horns and exhaust - DCC HM7000 TXS Sound Fitted - OO Scale

Hornby Railroad: BR Class 60 60069 'Humphrey Davy' Coal Sector

Railroad: BR Class 60 60069 'Humphrey Davy' Coal Sector The Class 60s were the last heavy haulers built for BR. No.60069 was allocated to BR’s Train Load Freight (TLF) Coal Sector and named ‘Humphrey Davy’, in honour of the inventor of the miner’s safety lamp.  Following the break-up of TLF, the Class 60s were divided between three of the shadow franchises: Mainline Freight, Loadhaul and Transrail Freight, but not long after they were formed they were absorbed into English, Welsh & Scottish (EWS). By 2007, it was estimated that the operational fleet was down to just 60 locomotives, the rest either in store or undergoing repair. That year, EWS was acquired by DB Schenker, a wholly-owned subsidiary of German railway company, Deutche Bahn.  Our RailRoad Class 60 model represents 'Humphrey Davy' in detail, but with added features that make for a much more durable locomotive. Product features: Design based on extensive research and original drawings HM7000-21 Pin decoder compatible Space for a additional R7408 Enhanced Bass Speaker Working directional lights All wheel electrical pickup NEM couplings Brass axle bearings Separately fitted handrails, horns and exhaust - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: BR Class 90 90020 'Collingwood' EWS

Railroad: BR Class 90 90020 'Collingwood' EWS The Class 90 is a type of locomotive designed for mixed traffic work on the 25kV AC overhead network as replacements for aging electrics such as the Classes 81, 82, 83, 84 and 85 that dated back to the 1960s.  Between 1987 and 1990, 50 examples were built at BREL Crewe and put into traffic on the West Coast Main Line during the latter years of British Rail and were equally at home on freight as they were on passenger traffic. Following privatisation of BR, the type served with various operators, such as Abellio Greater Anglia, Virgin Trains West Coast, GNER, and freight operators Freightliner and EWS.  This RailRoad locomotive model of 90020 is depicted during its time as part of the EWS fleet when named ‘Collingwood’, in a striking red and yellow livery. The original locomotive is currently in short-term storage for potential further use by DB Cargo. - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: BR Class 90 90020 'Collingwood' EWS (Sound Fitted)

Railroad: BR Class 90 90020 'Collingwood' EWS (Sound Fitted) The Class 90 is a type of locomotive designed for mixed traffic work on the 25kV AC overhead network as replacements for aging electrics such as the Classes 81, 82, 83, 84 and 85 that dated back to the 1960s.  Between 1987 and 1990, 50 examples were built at BREL Crewe and put into traffic on the West Coast Main Line during the latter years of British Rail and were equally at home on freight and passenger traffic. Following privatisation of BR, the type served with various operators, such as Abellio Greater Anglia, Virgin Trains West Coast, GNER, and freight operators Freightliner and EWS.  This RailRoad locomotive model of 90020 is depicted during its time as part of the EWS fleet when named ‘Collingwood’. Sporting a striking red and yellow livery, this model is DCC sound fitted, for an extra authentic touch. The original locomotive is currently in short-term storage for potential further use by DB Cargo. - DCC HM7000 TXS Sound Fitted - OO Scale

Hornby Railroad: BR Class 47 47787 'Windsor Castle' EWS

Railroad: BR Class 47 47787 'Windsor Castle' EWS Built by Brush, this locomotive started life as D1757 in September 1964 at Cardiff Canton, and, under TOPS, became 47163 in 1974.  It received various modifications between 1976 and 1979 and was reclassified as a 47/4 and renumbered 47610 in April 1984. It was renumbered and again in April 1989, when it became a 47/8 and was given the number 47823, before becoming 47787 as part of the EWS fleet and being named ‘Windsor Castle’. Previously, it had carried the names ‘SS Great Britain' and ‘Victim Support’. It became part of the West Coast Railways operation at Carnforth in February 2007.  Our Class 47 RailRoad model faithfully depicts this locomotive in its EWS form, with added features for enhanced durability. - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: BR Class 47 47787 'Windsor Castle' EWS (Sound Fitted)

Railroad: BR Class 47 47787 'Windsor Castle' EWS (Sound Fitted) Built by Brush, this locomotive started life as D1757 in September 1964 at Cardiff Canton, and under TOPS became 47163 in 1974.  It received various modifications between 1976 and 1979 and was reclassified as a 47/4 and renumbered 47610 in April 1984. It was renumbered again in April 1989, when it became a 47/8 and was given the number 47823, before becoming 47787 as part of the EWS fleet and being named ‘Windsor Castle’. Previously, it had carried the names ‘SS Great Britain' and ‘Victim Support’. It became part of the West Coast Railways operation at Carnforth in February 2007.  Our Class 47 RailRoad model faithfully depicts this locomotive in its EWS form, with added features for enhanced durability and a pre-fitted sound chip for authentic railway sounds. - DCC Sound Fitted (HM7000) - OO Scale

Hornby Railroad: BR Class 60 60038 'Avesta Polarit' EWS

Railroad: BR Class 60 60038 'Avesta Polarit' EWS  A growth in demand in the heavy haulage sector led to a review of BR’s available motive power in the 1980s.  With 185 locomotives of the Type 5, 3,000+ horsepower category available, made up of its Classes 56 and 58, it was clear that more would be needed, and BR put out an invitation to tender for new locomotives in 1987. The 100 locomotive order was awarded to Brush in Loughborough, and these entered service between 1989 and 1993. No.60038 was named ‘Bidean nam Bian’ after the Scottish ‘Munro’ in Glen Coe.  With BR’s trainload freight business broken up into shadow franchises, the locomotive became part of Loadhaul, based in the north-east. By 1996, this had become part of EWS and 60038 was named 'Avesta Polarit' after the steel making company, at the DFDS Immingham sea terminal on 19th March 2002. It is now one of 14 owned by DC Rail and currently in store.  Our RailRoad model is an accurate replica of this Class 60 locomotive, with high detail and design features for enhanced durability. Product features: Design based on extensive research and original drawings HM7000-21 Pin decoder compatible Space for a additional R7408 Enhanced Bass Speaker Working directional lights All wheel electrical pickup NEM couplings Brass axle bearings Separately fitted handrails, horns and exhaust - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: BR Class 37 37422 'Pegasus' Swietelsky (Sound Fitted)

Railroad: BR Class 37 37422 'Pegasus' Swietelsky Rail Services (Sound Fitted)  Originally new from Vulcan Foundry in February 1965 as D6966, the locomotive this RailRoad model is based on became 37266 under the TOPS numbering system in 1974.  Its career started at Tinsley, Sheffield and it also had postings at Stratford and Landore under BR. In January 1986 it was reclassified to 37/4 and renumbered 37422. The locomotive has worn several liveries and had several different operators, including EWS, DB Schenker, and DRS. It became part of the Harry Needle Railroad Company spot hire fleet based at Barrow Hill, which was taken over by Swietelsky, an Austrian-based railway construction and maintenance contractor, in January 2025. The locomotive was named ‘Pegasus’ later the same year.  This OO gauge locomotive version is pre-fitted with a sound chip for the most authentic model railway experience. - DCC HM7000 TXS Sound Fitted - OO Scale

Hornby Railroad: GWR County 1013 'County of Dorset' BR Lined Green

Railroad: GWR County 1013 'County of Dorset' BR Lined Green  The ‘County’ Class was the last of the GWR-designed two-cylinder 4-6-0s, with 30 built at Swindon between 1945 and 1947 to the design of Chief Mechanical Engineer, Frederick Hawksworth.  ‘County of Dorset’ entered service in February 1946 and spent most of its early years in the West Country at Bristol, Plymouth, Truro and Penzance, before transferring to Shrewsbury in December 1951. Its final move was to Swindon in September 1963, from where it was withdrawn in July the following year and scrapped at Cashmore’s yard in Newport, South Wales.  Our OO gauge RailRoad replica model locomotive is a detailed, yet durable, version of the Country Class, bringing the 'County of Dorset' to your model railway collection. - DCC Ready 21-Pin Socket - OO Scale

Hornby Ruston & Hornsby 88DS 97088 Loadhaul (DVLR)

Ruston & Hornsby 88DS 97088 Loadhaul (DVLR) A total of 271 of Ruston & Hornsby’s ‘88DS’ four-wheel diesels were supplied mainly to industrial sites in the UK and overseas, and were rated at 80/88hp. Built in Lincoln between 1938 and 1967, seven of these were also used by BR’s North Eastern Region on departmental duties.  This model is finished in the distinctive ‘Loadhaul’ livery of black and orange. Formed in 1994 as part of the privatisation of BR, Loadhaul Ltd became part of EWS and subsequently DB Cargo. This OO design also features NEM tension lock couplings. - DCC Ready 6-Pin Socket - OO Scale

Hornby BR Class 08 08593/D3760 'Colchester TMD' Retro Lined Dark Blue

BR Class 08 08593/D3760 'Colchester TMD' Retro Lined Dark Blue  Add the Class 08 'Colchester TMD' model locomotive to your diesel collection in this elegant blue livery. With sprung metal buffers and NEM tension lock couplings, this is a delightful, highly detailed model.  Built at Crewe Works, this standard 350hp diesel electric shunter started life in November 1959 as D3760 and was allocated to Dannycraig depot at Swansea in South Wales. Under TOPS it was renumbered to 08593 and, in the 1990s, it was reallocated to Colchester where it received a retro-style red-lined BR livery with early ‘cycling lion’ emblem and its old number D3760.  It was also named ‘Colchester TMD’ which was applied in a cursive hand-writing style. It became part of the EWS fleet and, by 2010, it was withdrawn and then stored. It was acquired by Railway Support Services at Wishaw in 2016. - DCC Ready 8-Pin Socket - OO Scale

Hornby BR Class 56 56047 Dutch Transrail (TXS Sound Fitted)

BR Class 56 56047 Dutch Transrail (TXS Sound Fitted) This Transrail Class 56 OO gauge model locomotive features a striking grey and yellow livery, with sprung metal buffers and NEM tension lock couplings. The highly detailed model is also pre-fitted with HM7000 sound capability for the most authentic experience.  Built at Doncaster Works, 56047 entered service at Toton in July 1978. Transrail Freight was set up as a trainload freight operator based in St Blazey, Cornwall, formed in 1994 from part of BR’s Trainload Freight division during the privatisation of British Rail. During this period, it acquired a number of Class 56 locomotives, retaining the Dutch-style livery but with the addition of Transrail’s logo and markings.  Transrail was one of a number of main line companies to be bought in 1996 to form new freight operator, English Welsh & Scottish (EWS). It was withdrawn in October 2003 and scrapped at Immingham. - DCC Sound Fitted (HM7000) - OO Scale

Dapol Class 59/2 59201 "Vale of York" EWS

Class 59/2 59201 "Vale of York" EWS The Class 59 is a Co-Co formation diesel locomotive and the first US produced, privately-owned locomotive to operate regularly in the UK. The ordering of the first Class 59 was a result of quarry company Foster Yeomans dissatisfaction with the performance of the BR Class 56. The first 4 locomotives built by GMs Electromotive Division were delivered to Foster Yeoman during 1986 and 59005 in 1989. Proving very successful; one locomotive setting a new UK haulage record for a single locomotive of 4639 tonnes. Foster Yeomans rivals, Amey Roadstone Corp. (ARC) also ordered four modified Class 59s (59/1) as did National Power, who ordered six (59/2). GM invested in this initial UK success by extensively modifying the class 59 internally to produce the Class 66, also hugely successful, within both the UK and Continental Europe. Features: PLUX-22 DCC Decoder Socket Finely moulded body with many applied fine details  Printed name plates (Etched plates supplied separately)  Cast wheels with fine relief and appropriate colouring  Heavy diecast chassis with all wheel pick up  NEM pockets as standard  DC lighting with independent control of #1 & #2 end lamps (push/pull/light engine) and cab lighting (controlled by switches)  DCC controlled fully independent lighting:  Push/Pull and light engine modes for head and tail lights  Day/Night headlamp selection  Marker lamp control (where applicable)  Independent cab lighting (leading cab /trailing cab /off)   - OO Scale 

Hornby Railroad: Class 37 093 PoliceAdvert (Sound Fitted)

Railroad: Class 37 37093 Police BR 125 Advert (Sound Fitted) Recognised for its memorable role in a television advert – flagging down a speeding HST power car, this highly detailed model of Class 37 No. 37093 comes presented in its unique ‘Police’ promotional livery. Complete with a roof-mounted working blue light and DCC sound-fitted with Class 37 and effects, functions, and an authentic police siren straight out of the box. Equipped with NEM tension lock couplings and plastic buffers, this Co-Co diesel is built to perform on second radius curves or greater. History: Built at English Electric’s Robert Stephenson & Hawthorns works, this locomotive entered BR service as D6793 in 1963, allocated to Gateshead. Re-numbered 37093 in February 1974, it was painted into ‘Police’ livery, complete with blue light, for a BR television advertising campaign in July 1985, before returning to a more traditional livery at Stratford in August. It was renumbered 37509 in June 1986 and in 1989 allocated to the Freight Metals sector Thornaby pool. It finished its career with EWS and was cut up at Cardiff Canton in August 2005. - OO Scale

Hornby Railroad: Class 37 37418 'An Comunn Gaidhealach' Loram (SF)

Railroad: Class 37 37418 'An Comunn Gaidhealach' Loram (Sound Fitted) Finished in the Loram livery, Class 37 No. 37418 ‘An Commun Gaidhealach’ is brought to life in this detailed 00 gauge model.  Fitted with Hornby’s HM7000 21-pin sound decoder it delivers realistic, immersive audio straight from the box and is compatible with DCC and HM7000 App control.  As part of our RailRoad range, this model has been designed with fewer delicate detail parts and more durable detailing, making it better for handling - perfect for beginners or for adding to your existing collection! History: Released into BR traffic from Vulcan Foundry as D6971 on 18 March 1965, this locomotive was first allocated to Cardiff Canton. It was rebuilt as a Class 37/4 and renumbered 37418 in 1985 and transferred to Inverness. It received its unusual name ‘An Commun Gaidhealach’ (The Gaelic Association) at Edinburgh in October 1986, before entering the Provincial General Pool from January 1989.  It was renamed ‘Pectindae’ in April 1992, and then ‘East Lancashire Railway’ in April 1994, eventually being sold to a private owner in 2007 by EWS. It is currently on-hire to freight operator Loram Rail and painted in its livery, the ‘An Commun Gaidhealach’ name being reinstated in February 2024. - OO Scale

Hornby Railroad: Class 37 37419 'Carl Haviland' DRS Compass (SF)

Railroad: Class 37 37419 'Carl Haviland' DRS Compass (Sound Fitted) This sound-fitted Hornby RailRoad Class 37 No. 37419 ‘Carl Haviland’ is presented in Direct Rail Services livery complete with commemorative nameplate. Equipped with a 21-pin decoder preloaded with authentic Class 37 sound profiles, it delivers rich, immersive audio straight from the box.  Detail highlights include separately fitted plastic buffers, NEM tension lock couplings, and an accessory bag for added customisation. Designed to run on second radius curves or greater, this model combines performance, presentation, and sound in one standout locomotive. History: This locomotive entered service with BR in 1965 as D6991 allocated to Cardiff Canton, but was renumbered to 37291 in March 1974. It was rebuilt as a Class 37/4 and renumbered 37419 in 1985 and transferred to Scotland, entering the Provincial General Pool at inverness in 1989.  Reallocated to Thornaby as part of the Railfreight Construction sub-sector the following year, after many moves and sector allocations, it passed via EWS to Direct Rail Services in 2011. Since 2019 it has carried InterCity mainline livery and was named ‘Carl Haviland 1954-2012’.  - OO Scale

Hornby Railroad: Class 47 47306 'The Sapper' Railfreight Distribution

Railroad: Class 47 47306 'The Sapper' Railfreight Distribution A striking and authentic addition to any diesel-era collection, the R30440 Railfreight Distribution Class 47 Co-Co 47306 ‘The Sapper’ is finished in the Railfreight Distribution livery. This detailed model includes separately fitted plastic buffers and NEM coupling pockets. It comes equipped with a 21-pin DCC decoder socket, making it easy to upgrade for digital operation. - 21 pin DCC ready - OO Scale

Hornby Railroad: Class 47 47306 'The Sapper' RFD (Sound Fitted)

Railroad: Class 47 47306 'The Sapper' Railfreight Distribution (Sound Fitted)   - OO Scale - DCC TXS Sound Fitted (requires DCC or HM7000 App to operate) - NEM Tension Lock

Hornby Class 67 67015 DB Cargo "Leading the Next Generation"

Class 67 67015 DB Cargo "Leading the Next Generation of Rail Freight" This Class 67 No. 67015 model is finished in the vibrant DB Schenker red livery, reflecting its current use on premium services with Transport for Wales. Fitted with a 21-pin decoder socket, it is DCC ready for easy digital conversion. Sprung metal buffers and NEM couplings provide enhanced realism. With its powerful modern profile and push-pull capability, 67015 makes an ideal addition to any contemporary diesel or mixed-traffic collection. History: Thirty of these locomotives were built for EWS by Alstom in Spain in 1999/2000 as replacements for Class 47s, for use mainly on Royal Mail trains, but after mail contracts were lost in 2003/4 have been used on passenger trains.Transferred to DB Cargo by 2015, 67015 spent a period on lease to Wrexham & Shropshire trains and was named ‘David J. Lloyd’.  It is now one of a dozen leased to Transport for Wales for its premium services, currently running in DB Schenker red, and can be used in push-pull mode with Mk4 coaches and a DVT (Driving Van Trailer). - OO Scale

Bachmann Class 66/8 66847 'Terry Baker' Colas Rail Freight (SFD)

Class 66/8 66847 'Terry Baker' Colas Rail Freight (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Colas Rail Freight livery Running No. 66847 Named ‘Terry Baker’ Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original ‘Bug-Eye’ Light Clusters (2-Lamps, Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/8 66850 'David Maidment OBE' Colas Rail Freight

Class 66/8 66850 'David Maidment OBE' Colas Rail Freight The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Colas Rail Freight livery Running No. 66850 Named ‘David Maidment OBE’ Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original ‘Bug-Eye’ Light Clusters (2-Lamps, Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/8 66850 'David Maidment OBE' Colas Rail Freight (SF)

Class 66/8 66850 'David Maidment OBE' Colas Rail Freight (Sound Fitted) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Colas Rail Freight livery Running No. 66850 Named ‘David Maidment OBE’ Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original ‘Bug-Eye’ Light Clusters (2-Lamps, Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/8 66850 'David Maidment OBE' Colas Rail Freight (SFD)

Class 66/8 66850 'David Maidment OBE' Colas Rail Freight (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Colas Rail Freight livery Running No. 66850 Named ‘David Maidment OBE’ Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original ‘Bug-Eye’ Light Clusters (2-Lamps, Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/7 66761 'Wensleydale Railway Association' GBRf (SF)

Class 66/7 66761 'Wensleydale Railway Association' GBRf Europorte (Sound Fitted) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine GBRf ‘Europorte’ livery Running No. 66761 Named ‘Wensleydale Railway Association’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof and Modern Communication Pod Fitted 2 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Wrap-Around Control Panels Revised Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/7 66761 'Wensleydale Railway Association' GBRf (SFD)

Class 66/7 66761 'Wensleydale Railway Association' GBRf Europorte (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine GBRf ‘Europorte’ livery Running No. 66761 Named ‘Wensleydale Railway Association’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof and Modern Communication Pod Fitted 2 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Wrap-Around Control Panels Revised Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/7 66761 'Wensleydale Railway Association'GBRf Europorte

Class 66/7 66761 'Wensleydale Railway Association' GBRf Europorte The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine GBRf ‘Europorte’ livery Running No. 66761 Named ‘Wensleydale Railway Association’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof and Modern Communication Pod Fitted 2 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Wrap-Around Control Panels Revised Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/7 66777 'Annette' GBRf Europorte

Class 66/7 66777 'Annette' GBRf Europorte The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine GBRf ‘Europorte’ livery Running No. 66777 Named ‘Annette’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof and Modern Communication Pod Fitted 2 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Wrap-Around Control Panels Revised Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/7 66777 'Annette' GBRf Europorte (Sound Fitted Deluxe)

Class 66/7 66777 'Annette' GBRf Europorte (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine GBRf ‘Europorte’ livery Running No. 66777 Named ‘Annette’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof and Modern Communication Pod Fitted 2 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Wrap-Around Control Panels Revised Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/7 66777 'Annette' GBRf Europorte (Sound Fitted)

Class 66/7 66777 'Annette' GBRf Europorte (Sound Fitted) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine GBRf ‘Europorte’ livery Running No. 66777 Named ‘Annette’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof and Modern Communication Pod Fitted 2 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Wrap-Around Control Panels Revised Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/8 66847 'Terry Baker' Colas Rail Freight

Class 66/8 66847 'Terry Baker' Colas Rail Freight The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Colas Rail Freight livery Running No. 66847 Named ‘Terry Baker’ Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original ‘Bug-Eye’ Light Clusters (2-Lamps, Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/3 66304 DRS Plain Blue (Sound Fitted)

Class 66/3 66304 DRS Plain Blue (Sound Fitted) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66304 ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue

Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66422 Named ‘Max Joule 1958-1999’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue (SF)

Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue (Sound Fitted)  The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66422 Named ‘Max Joule 1958-1999’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue (SFD)

Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66422 Named ‘Max Joule 1958-1999’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/5 66515 Freightliner Racing Green (Sound Fitted Deluxe)

Class 66/5 66515 Freightliner Racing Green (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Freightliner Green livery Running No. 66515 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original WIPAC Light Clusters (3-Lamps) Small Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/6 66606 Freightliner Racing Green (Sound Fitted Deluxe)

Class 66/6 66606 Freightliner Racing Green (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Freightliner Green livery Running No. 66606 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original WIPAC Light Clusters (3-Lamps) Small Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/0 66096 EWS

Class 66/0 66096 EWS The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine EWS livery Running No. 66096 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original WIPAC Light Clusters (3-Lamps) Small Top Light Box Standard UK Pattern Buffers Combination Drawgear with Buckeye Couplings Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 2 Securing Lugs at each End Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Angled Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/3 66304 DRS Plain Blue

Class 66/3 66304 DRS Plain Blue The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66304 ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/3 66304 DRS Plain Blue (Sound Fitted Deluxe)

Class 66/3 66304 DRS Plain Blue (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66304 ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/0 66015 EWS

Class 66/0 66015 EWS The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine EWS livery Running No. 66015 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original WIPAC Light Clusters (3-Lamps) Small Top Light Box Standard UK Pattern Buffers Combination Drawgear with Buckeye Couplings Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 2 Securing Lugs at each End Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Angled Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann HKA Bogie Hopper DB Schenker '300649'

HKA Bogie Hopper DB Schenker '300649' The HKA Bogie Hopper Wagons originated from JMA Coal Hoppers which were ordered by National Power in the mid-1990s. After being acquired by EWS, many of the JMA fleet were fitted with new bogies and the resulting wagons received the TOPS code HKA – with their use subsequently expanded to aggregate traffic too. It is these wagons that form the prototype for this Bachmann Branchline model and the two variants – inner or outer wagons – can be modelled to suit individual needs. In normal operation HKAs run in fixed rakes with only buffers and conventional couplings fitted to the outer ends of the rake. Wagon-to-wagon coupling is by means of a buckeye, negating the need for buffers. The Branchline model can be configured as either; for an outer wagon the rectangular buffers, drawbar hook and screw-link coupling are fitted into the relevant bufferbeam receptacles, with a dummy tail lamp provided too, while for an inner variant the buckeye coupling and buckeye coupling lever is added. Features: Pristine DB Schenker Red Livery Running No. 300649 Accessory Pack NEM Coupling Pockets Length 267mm (over couplings) - Era 9 - OO Scale

Tamiya German Soldiers Field Briefing (1:35)

German Soldiers Field Briefing ★ This set depicts German soldiers from the middle stages of WWII in a variety of poses wearing winter uniforms and overcoats standing around a stove discussing battle strategies. ★It includes five figures depicting an officer and a noncommissioned officer looking over an open map, a soldier looking at his watch, another carrying a MG42 machine gun on his shoulder, and a squatting soldier. ★Also included in the set is a German shepherd figure lying down and accessories such as a newspaper and magazine. ★This set would go great in combination with winter-themed dioramas. - Plastic Kit Requires Glue & Paints to Complete - 1:35 Scale 

Gaugemaster Collection Class 33/0 '33030' EWS (N)

Class 33/0 '33030' EWS The class 33 diesel locomotives were built between 1960 and 1962 for the southern region of BR by BRCW. These locomotives were given the nick name of the "Crompton Class" due to the brand of electrical equipment used in the design. These locomotives were able to haul both passenger and freight stock with ease and many of them still remain in preservation. 1:148 Scale model of a Class 33 diesel locomotive decorated in WCRC livery. These models have been specially commissioned by Gaugemaster and form part of the Gaugemaster Collection Series. These models feature lots of era specific details and markings and lots of external body details as modelled on the prototype. Features: 6-Pin DCC Decoder Socket Gaugemaster Limited Edition Detailed body with etched grills Cast wheels with fine relief and appropriate colouring Tungsten chassis All wheel pickup NEM coupling pockets Directional lighting New design motor for smooth running Includes magnetic couplings and traditional couplings Accessory bag with spares and optional detail parts - N Scale

Dapol Class 66 '66001' EWS (O)

Class 66 '66001' EWS Features: Operating front/rear lights (independent operation for DCC, (switched for DC use) Includes day/night mode) Operating ‘side’ lights (where lighting cluster is applicable) Cab light (independent operation) Detailed cab with illuminated cab control panel Two motors (balanced & matched) for maximum pulling power and slow speed running control DC control switches to be accessible via lift-off roof panel DCC Ready with two PLUX 22 decoder sockets Etched grills now with added detail showing radiator equipment with engine room lighting Separate detail (Handrails, Handles, Grills etc.) Heavyweight Diecast chassis Diecast bogie frames  Rotating axle centres Appropriate couplings attached O gauge society wheel profiles Sprung buffers Interchangeable front buffer beams with the option for an auto coupler to be used The entire buffer beam assembly can be swapped out leaving no unsightly seams on the valance     - O Scale

Dapol Class 66 '66001' DB Cargo (N)

Class 66 '66001' DB Cargo  The Class 66 is a type of Co-Co heavy freight locomotive and was originally ordered by EWS to replace and update the freight fleet post privatisation in 1996. 250 Class 66s were ordered from General Motors Electromotive Division (EMD) and these were built in London, Ontario, Canada. Subsequent freight operators, Freightliner, GB Railfreight and Direct Rail Services (DRS) also ordered batches of these locomotives. Overall the locomotive has been successful in service, offering improved reliability and performance over its predecessors. However the locomotive has also had its critics, partly due to the comfort the design offered drivers and staff and probably their ubiquity, ousting many different types of British built locomotives commonly seen prior to its commissioning. As a testament to the commercial success of the Class 66, it has been certified for use in many European countries (known as the Series 66) and can be seen commonly in Germany, Poland and Sweden amongst others. During its long service, the locomotive has been modified many times including low emission variants for greener running and highly geared models for hauling heavier loads albeit at slower speeds. The Class 66 is still in operation and is used by DB, GBRf, Freightliner, DRS and Colas Rail.    Features: Smooth running 5 pole next generation motor      All wheel pickup              All wheel drive via re-worked smooth drive low maintenance mechanism              Die-cast chassis             DCC Sound ready, Next-18 decoder socket (recommended 6 function decoder) Independent directional front/rear main lighting control—day and night lighting with four light clusters being modelled                 Independent directional front/rear cab lighting control           Main lamp and cab lighting override switches for DC users (Independent front/rear control)  Two cab window designs modelled     Removable self-centring close coupling mechanism with NEM pockets     Standard NEM fitting N Gauge couplers              RP 25 wheels     Newly tooled highly detailed body and fittings   Accessory bag with etched nameplates and detailed buffer beam fittings         Clip-fit body for easy DCC fitting - N Scale

Dapol Class 66 '66096' EWS (N)

Class 66 '66096' EWS The Class 66 is a type of Co-Co heavy freight locomotive and was originally ordered by EWS to replace and update the freight fleet post privatisation in 1996. 250 Class 66s were ordered from General Motors Electromotive Division (EMD) and these were built in London, Ontario, Canada. Subsequent freight operators, Freightliner, GB Railfreight and Direct Rail Services (DRS) also ordered batches of these locomotives. Overall the locomotive has been successful in service, offering improved reliability and performance over its predecessors. However the locomotive has also had its critics, partly due to the comfort the design offered drivers and staff and probably their ubiquity, ousting many different types of British built locomotives commonly seen prior to its commissioning. As a testament to the commercial success of the Class 66, it has been certified for use in many European countries (known as the Series 66) and can be seen commonly in Germany, Poland and Sweden amongst others. During its long service, the locomotive has been modified many times including low emission variants for greener running and highly geared models for hauling heavier loads albeit at slower speeds. The Class 66 is still in operation and is used by DB, GBRf, Freightliner, DRS and Colas Rail.    Features: Smooth running 5 pole next generation motor      All wheel pickup              All wheel drive via re-worked smooth drive low maintenance mechanism              Die-cast chassis             DCC Sound ready, Next-18 decoder socket (recommended 6 function decoder) Independent directional front/rear main lighting control—day and night lighting with four light clusters being modelled                 Independent directional front/rear cab lighting control           Main lamp and cab lighting override switches for DC users (Independent front/rear control)  Two cab window designs modelled     Removable self-centring close coupling mechanism with NEM pockets     Standard NEM fitting N Gauge couplers              RP 25 wheels     Newly tooled highly detailed body and fittings   Accessory bag with etched nameplates and detailed buffer beam fittings         Clip-fit body for easy DCC fitting - N Scale

Dapol Class 66 '66531' Freightliner Racing Green (N)

Class 66 '66531' Freightliner Racing Green The Class 66 is a type of Co-Co heavy freight locomotive and was originally ordered by EWS to replace and update the freight fleet post privatisation in 1996. 250 Class 66s were ordered from General Motors Electromotive Division (EMD) and these were built in London, Ontario, Canada. Subsequent freight operators, Freightliner, GB Railfreight and Direct Rail Services (DRS) also ordered batches of these locomotives. Overall the locomotive has been successful in service, offering improved reliability and performance over its predecessors. However the locomotive has also had its critics, partly due to the comfort the design offered drivers and staff and probably their ubiquity, ousting many different types of British built locomotives commonly seen prior to its commissioning. As a testament to the commercial success of the Class 66, it has been certified for use in many European countries (known as the Series 66) and can be seen commonly in Germany, Poland and Sweden amongst others. During its long service, the locomotive has been modified many times including low emission variants for greener running and highly geared models for hauling heavier loads albeit at slower speeds. The Class 66 is still in operation and is used by DB, GBRf, Freightliner, DRS and Colas Rail.    Features: Smooth running 5 pole next generation motor All wheel pickup All wheel drive via re-worked smooth drive low maintenance mechanism Die-cast chassis DCC Sound ready, Next-18 decoder socket (recommended 6 function decoder) Independent directional front/rear main lighting control—day and night lighting with four light clusters being modelled Independent directional front/rear cab lighting control Main lamp and cab lighting override switches for DC users (Independent front/rear control)  Two cab window designs modelled     Removable self-centring close coupling mechanism with NEM pockets Standard NEM fitting N Gauge couplers RP 25 wheels Newly tooled highly detailed body and fittings Accessory bag with etched nameplates and detailed buffer beam fittings Clip-fit body for easy DCC fitting - N Scale

Dapol Class 66 '66706' "Nene Valley" GBRf Europorte (N)

Class 66 '66706' "Nene Valley" GBRf Europorte The Class 66 is a type of Co-Co heavy freight locomotive and was originally ordered by EWS to replace and update the freight fleet post privatisation in 1996. 250 Class 66s were ordered from General Motors Electromotive Division (EMD) and these were built in London, Ontario, Canada. Subsequent freight operators, Freightliner, GB Railfreight and Direct Rail Services (DRS) also ordered batches of these locomotives. Overall the locomotive has been successful in service, offering improved reliability and performance over its predecessors. However the locomotive has also had its critics, partly due to the comfort the design offered drivers and staff and probably their ubiquity, ousting many different types of British built locomotives commonly seen prior to its commissioning. As a testament to the commercial success of the Class 66, it has been certified for use in many European countries (known as the Series 66) and can be seen commonly in Germany, Poland and Sweden amongst others. During its long service, the locomotive has been modified many times including low emission variants for greener running and highly geared models for hauling heavier loads albeit at slower speeds. The Class 66 is still in operation and is used by DB, GBRf, Freightliner, DRS and Colas Rail.    Features: Smooth running 5 pole next generation motor All wheel pickup All wheel drive via re-worked smooth drive low maintenance mechanism Die-cast chassis DCC Sound ready, Next-18 decoder socket (recommended 6 function decoder) Independent directional front/rear main lighting control—day and night lighting with four light clusters being modelled Independent directional front/rear cab lighting control Main lamp and cab lighting override switches for DC users (Independent front/rear control)  Two cab window designs modelled     Removable self-centring close coupling mechanism with NEM pockets Standard NEM fitting N Gauge couplers RP 25 wheels Newly tooled highly detailed body and fittings Accessory bag with etched nameplates and detailed buffer beam fittings Clip-fit body for easy DCC fitting - N Scale

Dapol Class 66 '66734' "Platinum Jubilee" GBRf Jubilee Pink (N)

Class 66 '66734' "Platinum Jubilee" GBRf Jubilee Pink The Class 66 is a type of Co-Co heavy freight locomotive and was originally ordered by EWS to replace and update the freight fleet post privatisation in 1996. 250 Class 66s were ordered from General Motors Electromotive Division (EMD) and these were built in London, Ontario, Canada. Subsequent freight operators, Freightliner, GB Railfreight and Direct Rail Services (DRS) also ordered batches of these locomotives. Overall the locomotive has been successful in service, offering improved reliability and performance over its predecessors. However the locomotive has also had its critics, partly due to the comfort the design offered drivers and staff and probably their ubiquity, ousting many different types of British built locomotives commonly seen prior to its commissioning. As a testament to the commercial success of the Class 66, it has been certified for use in many European countries (known as the Series 66) and can be seen commonly in Germany, Poland and Sweden amongst others. During its long service, the locomotive has been modified many times including low emission variants for greener running and highly geared models for hauling heavier loads albeit at slower speeds. The Class 66 is still in operation and is used by DB, GBRf, Freightliner, DRS and Colas Rail.    Features: Smooth running 5 pole next generation motor All wheel pickup All wheel drive via re-worked smooth drive low maintenance mechanism Die-cast chassis DCC Sound ready, Next-18 decoder socket (recommended 6 function decoder) Independent directional front/rear main lighting control—day and night lighting with four light clusters being modelled Independent directional front/rear cab lighting control Main lamp and cab lighting override switches for DC users (Independent front/rear control)  Two cab window designs modelled     Removable self-centring close coupling mechanism with NEM pockets Standard NEM fitting N Gauge couplers RP 25 wheels Newly tooled highly detailed body and fittings Accessory bag with etched nameplates and detailed buffer beam fittings Clip-fit body for easy DCC fitting - N Scale

Dapol Class 66 '66779' "Evening Star" GBRf BR Lined Green (N)

Class 66 '66779' "Evening Star" GBRf BR Lined Green The Class 66 is a type of Co-Co heavy freight locomotive and was originally ordered by EWS to replace and update the freight fleet post privatisation in 1996. 250 Class 66s were ordered from General Motors Electromotive Division (EMD) and these were built in London, Ontario, Canada. Subsequent freight operators, Freightliner, GB Railfreight and Direct Rail Services (DRS) also ordered batches of these locomotives. Overall the locomotive has been successful in service, offering improved reliability and performance over its predecessors. However the locomotive has also had its critics, partly due to the comfort the design offered drivers and staff and probably their ubiquity, ousting many different types of British built locomotives commonly seen prior to its commissioning. As a testament to the commercial success of the Class 66, it has been certified for use in many European countries (known as the Series 66) and can be seen commonly in Germany, Poland and Sweden amongst others. During its long service, the locomotive has been modified many times including low emission variants for greener running and highly geared models for hauling heavier loads albeit at slower speeds. The Class 66 is still in operation and is used by DB, GBRf, Freightliner, DRS and Colas Rail.    Features: Smooth running 5 pole next generation motor All wheel pickup All wheel drive via re-worked smooth drive low maintenance mechanism Die-cast chassis DCC Sound ready, Next-18 decoder socket (recommended 6 function decoder) Independent directional front/rear main lighting control—day and night lighting with four light clusters being modelled Independent directional front/rear cab lighting control Main lamp and cab lighting override switches for DC users (Independent front/rear control)  Two cab window designs modelled     Removable self-centring close coupling mechanism with NEM pockets Standard NEM fitting N Gauge couplers RP 25 wheels Newly tooled highly detailed body and fittings Accessory bag with etched nameplates and detailed buffer beam fittings Clip-fit body for easy DCC fitting - N Scale

Dapol Class 66 '66846' Colas Rail Freight (N)

Class 66 '66846' Colas Rail Freight The Class 66 is a type of Co-Co heavy freight locomotive and was originally ordered by EWS to replace and update the freight fleet post privatisation in 1996. 250 Class 66s were ordered from General Motors Electromotive Division (EMD) and these were built in London, Ontario, Canada. Subsequent freight operators, Freightliner, GB Railfreight and Direct Rail Services (DRS) also ordered batches of these locomotives. Overall the locomotive has been successful in service, offering improved reliability and performance over its predecessors. However the locomotive has also had its critics, partly due to the comfort the design offered drivers and staff and probably their ubiquity, ousting many different types of British built locomotives commonly seen prior to its commissioning. As a testament to the commercial success of the Class 66, it has been certified for use in many European countries (known as the Series 66) and can be seen commonly in Germany, Poland and Sweden amongst others. During its long service, the locomotive has been modified many times including low emission variants for greener running and highly geared models for hauling heavier loads albeit at slower speeds. The Class 66 is still in operation and is used by DB, GBRf, Freightliner, DRS and Colas Rail.    Features: Smooth running 5 pole next generation motor All wheel pickup All wheel drive via re-worked smooth drive low maintenance mechanism Die-cast chassis DCC Sound ready, Next-18 decoder socket (recommended 6 function decoder) Independent directional front/rear main lighting control—day and night lighting with four light clusters being modelled Independent directional front/rear cab lighting control Main lamp and cab lighting override switches for DC users (Independent front/rear control)  Two cab window designs modelled     Removable self-centring close coupling mechanism with NEM pockets Standard NEM fitting N Gauge couplers RP 25 wheels Newly tooled highly detailed body and fittings Accessory bag with etched nameplates and detailed buffer beam fittings Clip-fit body for easy DCC fitting - N Scale

Dapol NER Class E1 (LNER J72) '2173' NER Lined Black (N)

NER Class E1 (LNER J72) '2173' NER Lined Black First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '2183' LNER Pre-War Black (N)

LNER J72 '2183' LNER Pre-War Black First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '68723' BR Black (Early) (Newcastle Station Pilot) (N)

LNER J72 '68723' BR Black (Early) (Newcastle Station Pilot) First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '68736' BR Lined Apple Green (York Station Pilot) (N)

LNER J72 '68736' BR Lined Apple Green (York Station Pilot) First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '68745' BR Black (Early) (N)

LNER J72 '68745' BR Black (Early) First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '69007' BR Black (Late) (N)

LNER J72 '69007' BR Black (Late) First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '69023' BR Lined Apple Green (Preserved) (N)

LNER J72 '69023' BR Lined Apple Green (Preserved)  First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '8680' LNER Lined Green (N)

LNER J72 '8680' LNER Lined Green First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Scenecraft Newsagent Platform Kiosk - Blue 'WHSmith'

Newsagent Platform Kiosk - Blue Any station worth stopping at should provide passengers with somewhere to grab a good read and refreshments for the journey ahead, and whilst some locations offered a shop within the station building complex, many relied on standalone kiosks to provide the latest news and light snacks and drinks. If you want to give your miniature passengers the same amenities, then look no further than this Scenecraft model to do the job! Features: Highly detailed, hand painted model Fully decorated and ready to place on your layout - OO Scale

Scenecraft Newsagent Platform Kiosk - Orange & Brown 'WHSmith'

Newsagent Platform Kiosk - Orange & Brown Any station worth stopping at should provide passengers with somewhere to grab a good read and refreshments for the journey ahead, and whilst some locations offered a shop within the station building complex, many relied on standalone kiosks to provide the latest news and light snacks and drinks. If you want to give your miniature passengers the same amenities, then look no further than this Scenecraft model to do the job! Features: Highly detailed, hand painted model Fully decorated and ready to place on your layout - OO Scale

Airfix Supermarine Spitfire Mk.IXc - Flying Dray 'Beers Away' (1:24)

Supermarine Spitfire Mk.IXc - Flying Dray 'Beers Away' This Supermarine Spitfire Mk.IXc kit in 1:24 scale includes all the parts you need to replicate the beer-carrying Spitfires, the ‘Flying Drays’. Build your own morale-boosting Second World War aircraft and create a lasting tribute to the heroes of war. We've also added in some additional resin parts, essential for enhancing the story of your model. These include two beer barrels with lids, two nose cones, two bomb racks and a slipper tank. And every kit comes with an Airfix pint glass, so you can raise your own morale while modelling. - 448 Parts - 3 Scheme Options - Skill Level 4 - 1:24 Scale  

Airfix Boulton Paul Defiant NF.I (1:48)

Boulton Paul Defiant NF.I Quickly outclassed as a day fighter during the Battle of Britain, the Boulton Paul Defiant was tasked with protecting Britain from night bombing raids by the Luftwaffe. Not trained to fight at night, Defiant crews had to develop interception techniques as they fought but found the aircraft much more suited to this nocturnal fighting environment. After enjoying initial success against Luftwaffe pilots unfamiliar with Britain's turret fighter, Defiant crews soon discovered the limitations of their aircraft. The significant weight of the gun turret, combined with a relatively poor arc of defensive fire, meant that German Messerschmitts soon learned how to attack these unusual aircraft. As combat losses began to mount, RAF Defiants were relegated to night fighting duties, where the aircraft was much less vulnerable and could make better use of its offensive firepower. As the night Blitz against London raged, Defiant crews had to develop their own interception techniques, as many were not trained in this type of fighting. They soon began to score victories against the Luftwaffe raiders, helping to establish a cohesive night defence system and rebuilding the reputation of the Defiant. These all-black nocturnal hunters became some of the most distinctive RAF aircraft of the Second World War.  - Plastic Kit Requires Glue & Paint to Complete - 133 Pieces - 2 Scheme Options - Skill Level 2 - 250mm Wingspan - 1:48 Scale

Hornby BR Class 37 37704 EWS (TT)

EWS Class 37 No.37704 - DCC Ready NEXT-18 Decoder Socket - TT:120 Scale

Corgi Handley Page Halifax MkV 'London's Revenge / L for Lana' (1:72)

Handley Page Halifax MkV 'London's Revenge / L for Lana' - RCAF No.427 Sqn - RAF Leeming Recognise the lion on the nose of this 1:72 scale Handley Page Halifax MkV? There's a fascinating story behind this artwork (see below), and the model looks incredible on its stand. It's been a while since we last made a Handley Page Halifax, but we've never done one in this unique configuration. With rotatable propellers and detailed crew figures, this is a must-have for film fans and aviation enthusiasts. This die-cast model is a limited edition of 900 - 1:72 Scale

Bachmann BR MK1 RB(R) BR InterCity Executive 'IC1705' (OO)

BR MK1 RB(R) Restaurant Buffet Refurbished BR InterCity (Executive) The Bachmann Branchline Mk1 Coaches have long been the model of choice for the discerning enthusiast wishing to add the iconic Mk1 Coach to their collection and today, these models continue to provide OO scale modellers with the finest models, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard tension lock coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR InterCity (Executive) livery Running No. IC1705 Commonwealth Bogies End Steps Removed Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm (over couplings) - Era 8 - OO Scale

Bachmann BR MK1 RB(R) BR InterCity Swallow Charter '1693' (OO)

BR MK1 RB(R) Restaurant Buffet Refurb. BR InterCity Charter (Swallow)  The Bachmann Branchline Mk1 Coaches have long been the model of choice for the discerning enthusiast wishing to add the iconic Mk1 Coach to their collection and today, these models continue to provide OO scale modellers with the finest models, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard tension lock coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR InterCity Charter (Swallow) livery Running No. 1693 Commonwealth Bogies End Steps Removed Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm (over couplings) - Era 8 - OO Scale

Bachmann BR MK1 FO BR InterCity Executive 'IC3107' (OO)

BR MK1 FO First Open BR InterCity (Executive) The Bachmann Branchline Mk1 Coaches have long been the model of choice for the discerning enthusiast wishing to add the iconic Mk1 Coach to their collection and today, these models continue to provide OO scale modellers with the finest models, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard tension lock coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR InterCity (Executive) livery Running No. IC3107 Commonwealth Bogies End Steps Removed Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm (over couplings) - Era 8 - OO Scale

Bachmann BR MK1 FO BR InterCity Swallow Charter '3120' (OO)

BR MK1 FO First Open BR InterCity Charter (Swallow) The Bachmann Branchline Mk1 Coaches have long been the model of choice for the discerning enthusiast wishing to add the iconic Mk1 Coach to their collection and today, these models continue to provide OO scale modellers with the finest models, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard tension lock coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR InterCity Charter (Swallow) livery Running No. 3120 Commonwealth Bogies End Steps Removed Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm (over couplings) - Era 8 - OO Scale

Bachmann BR MK1 FO BR Southern Region Green 'S3064' (OO)

BR MK1 FO First Open BR (SR) Green The Bachmann Branchline Mk1 Coaches have long been the model of choice for the discerning enthusiast wishing to add the iconic Mk1 Coach to their collection and today, these models continue to provide OO scale modellers with the finest models, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard tension lock coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR (SR) Green livery Running No. S3064 BR1Bogies End Steps Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm (over couplings) - Era 5 - OO Scale

Bachmann BR MK1 FO BR Blue & Grey 'M3116' (OO)

BR MK1 FO First Open BR Blue & Grey 'M3116' The Bachmann Branchline Mk1 Coaches have long been the model of choice for the discerning enthusiast wishing to add the iconic Mk1 Coach to their collection and today, these models continue to provide OO scale modellers with the finest models, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard tension lock coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR Blue & Grey livery Running No. M3116 Commonwealth Bogies End Steps Removed Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm (over couplings) - Era 6 - OO Scale

Corgi Ford Escort Mk2 1300 Sport - Jupiter Red (1:43)

Ford Escort Mk2 1300 Sport - Jupiter Red  Another iconic Ford Escort for your Vanguards collection, but this Mk2 1300 Sport model is in a stunning shade of Jupiter Red. Based on a car that is currently undergoing restoration, our die-cast model shows how it will look when complete. If your collection is missing this type of car, you need to add this 1:43 scale version now. This die-cast model is a limited edition of 1,200. - 1:43 Scale

Graham Farish BR Mk1 NBA Brake Gangwayed High Security RES Royal Mail '94457'

BR Mk1 NBA Brake Gangwayed High Security Rail Exp. Sys. (Royal Mail) 94457  This Graham Farish model is the perfect addition to any Rail Express Systems fleet and employs a detailed bodyshell, with fine mouldings of the roller shutter doors, including the shutter vanes which are engraved individually, and the guard’s door with its adjacent handrails. At each end the corridor connector, handrails, ETH equipment and tail lights are each moulded crisply, whilst below the solebar the truss rod frames are modelled with great finesse, flanked by the battery boxes, dynamo and other auxiliary equipment. Blackened metal wheelsets are fitted to each bogie to ensure free-running, and not only does this model run well but it looks well too, with the vibrant RES livery reproduced using authentic colours, logos and fonts to add the finishing touches. MODEL FEATURES: Pristine Rail Express Systems (Royal Mail) livery Running No. 94457 BR1 Bogies Length 134mm (over couplings) - Era 8 - N Scale

Graham Farish BR Mk1 NBA Brake Gangwayed High Security RES '94465'

BR Mk1 NBA Brake Gangwayed High Security Rail Express Systems 94465 This Graham Farish model is the perfect addition to any Rail Express Systems fleet and employs a detailed bodyshell, with fine mouldings of the roller shutter doors, including the shutter vanes which are engraved individually, and the guard’s door with its adjacent handrails. At each end the corridor connector, handrails, ETH equipment and tail lights are each moulded crisply, whilst below the solebar the truss rod frames are modelled with great finesse, flanked by the battery boxes, dynamo and other auxiliary equipment. Blackened metal wheelsets are fitted to each bogie to ensure free-running, and not only does this model run well but it looks well too, with the vibrant RES livery reproduced using authentic colours, logos and fonts to add the finishing touches. MODEL FEATURES: Pristine Rail Express Systems livery Running No. 94465 BR1 Bogies Length 134mm (over couplings) - Era 8 - N Scale

Bachmann BR VBA Van EWS '200557' (OO)

BR VBA Van EWS '200557'  In the late 1960s British Railways required air braked stock to operate its new Air-Braked Network services – which would later be known as Speedlink -  and the Cov AB (Covered, Air Braked) van provided the answer, becoming BR’s first general purpose air braked van. Introduced from 1969, the Cov ABs had a modern appearance in comparison to the wooden box vans in widespread use at the time and the side of the van was constructed from a pair of doors, providing large openings for loading/unloading. When the Total Operations Processing System (TOPS) was introduced in the 1970s the vans were given the TOPS code VAB, VAA, VBA or VBB. Used to transport general merchandise, the vans were often marshalled into mixed goods trains as opposed to being operated as uniform rakes and could carry all manner of general merchandise. By the 1980s their traffic was reducing and so commenced their withdrawal although a small number remained in service towards the end of the century, coming under private ownership following Privatisation. The Bachmann Branchline model employs a highly detailed bodyshell which boasts precision moulded panel lines, door handles and mechanisms, and fine rivet detailing. At either end a separate lamp iron is present, along with metal buffers and a cosmetic coupling hook. The solebar includes prototypical detailing along with the door runners, whilst the wagon’s suspension and brake gear is added using separate components. The metal wheelsets are mounted on a pivoting frame, allowing this long wheelbase wagon to traverse tight curves with ease whilst NEM coupling pockets are also incorporated. Authentic colours and typefaces are employed during the livery application process, completing this high-fidelity model. Features: Pristine EWS livery Running No. 200557 NEM Coupling Pockets Length 156mm (over couplings) - Era 9 - OO Scale

Hornby RailRoad: BR Class 08, 08512 EWS (Sound Fitted)

RailRoad: Class 08, 08512 EWS (Sound Fitted) This RailRoad Class 08 Shunter is the ideal model for arranging wagons in a goods yard and is suitable for model railway layouts large or small. It comes DCC-ready with a Next 18-pin plug, so you can upgrade it to run on DCC or with our HM7000 Bluetooth-controlled system, which also includes sound via a speaker inside the locomotive. The Class 08 350hp diesel electric shunter was the standard BR general-purpose shunting locomotive with 996 examples built between 1952 and 1962. They could be found shunting large marshalling yards and smaller goods depots. With the decline in the handling of individual goods wagons and the need to assemble trains, by 2000 there were just 100 left in service, with large numbers either scrapped, exported or sold into industrial use. Many of these useful locomotives found their way into the fleets of freight operating companies and 08512 is depicted as a typical EWS fleet member in the company’s eye-catching red and gold colour scheme. - DCC Sound Fitted (HM7000 Decoder) - OO Scale

Hornby Class 66 66850 'David Maidment OBE' Colas (TT) (Sound Fitted)

Class 66 66850 'David Maidment OBE' Colas (TT) (Sound Fitted) This model will feature directional and cab lighting. Night and day headlights will also be included. All the Class 66 models have 12 axles for the current pick-up and both bogies are motor-driven. - SOUND FITTED *Requires HM7000 APP or DCC controller to operate sounds and drive model. (Will not operate on analogue) - Era 11 - TT:120 Scale

Hornby Class 60 60008 'Gypsum Queen II' Loadhaul - (DCC Sound Fitted)

Class 60 60008 'Gypsum Queen II' Loadhaul - (DCC Sound Fitted) Includes: - Detailed body and cabs - Etch Nameplates - Working directional lights - Metal sprung buffers - NEM couplings and pockets - 5 Pole Skew wound motor - Accessory bag includes buffer beam hoses and parts - DCC Sound Fitted HM7000 (NOTE: This model and sound functions can ONLY be operated with the HM7000 App via bluetooth or a DCC digital controller) - Model will traverse minimum of 2nd radius curves (R606/R607) - OO Scale

Hornby Class 66 66850 'David Maidment OBE' Colas Rail (TT)

Colas Rail, Class 66, Co-Co, 66850, 'David Maidment OBE' This model will feature directional and cab lighting. Night and day headlights will also be included. All the Class 66 models have 12 axles for the current pick-up and both bogies are motor-driven. - DCC Ready NEXT18 Socket - Era 11 - TT:120 Scale

Hornby GBRf Class 67 Bo-Bo 67027 - Era 11

GBRf, Class 67, Bo-Bo, 67027 The Class 67s were constructed by Alstom Meinfesa in Valencia between 1999 and 2000 for EWS. No. 67027 ‘Charlotte’ was named ‘Rising Star’ in 2003. Various changes took place over the years. In 2007, the ownership of the locomotive was transferred to DB Cargo UK. In 2014, the locomotive adopted the DB Cargo UK red livery, changing from the previous EWS red & yellow livery.  Ownership was again transferred to Colas Rail in 2017. To reflect this, the livery was amended to Colas Rail yellow, orange and black at the Toton TMD. The locomotive name changed to ‘Charlotte’ in the same year. In 2022, ownership was transferred to GB Railfreight and repainted in a blue and yellow livery, although this didn't last long as GBRF Rejected the 2 Class 67s and they were returned back to Colas. The model is painted in an iconic GBRf blue and orange livery. This model is DCC-ready and compatible with our HM7000 21-Pin decoder. - DCC Ready 21-Pin Decoder Socket - Era 11 - OO scale

Accurascale Class 37 37903 BR Railfreight Grey Large Logo

Class 37 37903 BR Railfreight Grey Large Logo Features: Provided DCC ready [21Pin MTX Socket] Every model includes PowerPack / Backup Power Capacitor Bank for up to ten seconds of power free running, flicker free lighting and continuous sound as well as independently controlled, smooth coreless motorised fan. Directional lighting on DC and DCC Fully functional Headlights per prototype Engine Bay Lighting (with visible Prime Mover) Separately switched cab lighting and illuminated, details driver’s console, auto off on movement Switchable red tail lights Heavy die-cast metal chassis High-quality five-pole motor with two flywheels Metal Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a scale top speed of 100 mph (160 km/h) DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running All wheel drive and all wheel pickup Fully sprung metal buffers, extra-fine factory-installed pipework and screw couplings Correct height mini-tension-lock couplers with NEM socket as well as a fully detailed bufferbeam - OO Scale

Accurascale Class 37 37903 BR Railfreight Grey Large Logo - DCC Sound

Class 37 37903 BR Railfreight Grey Large Logo - DCC Sound Features: Provided Factory DCC Sound Fitted [ESU LokSound 5] ESU LokSound V5 DCC Chip Customised Dual-Speaker Technology with; Large Accurathrash Bass Speaker Smaller 'iphone' style cube for higher frequencies Every model includes PowerPack / Backup Power Capacitor Bank for up to ten seconds of power free running, flicker free lighting and continuous sound as well as independently controlled, smooth coreless motorised fan. Directional lighting on DC and DCC Fully functional Headlights per prototype Engine Bay Lighting (with visible Prime Mover) Separately switched cab lighting and illuminated, details driver’s console, auto off on movement Switchable red tail lights Heavy die-cast metal chassis High-quality five-pole motor with two flywheels Metal Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a scale top speed of 100 mph (160 km/h) DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running All wheel drive and all wheel pickup Fully sprung metal buffers, extra-fine factory-installed pipework and screw couplings Correct height mini-tension-lock couplers with NEM socket as well as a fully detailed bufferbeam - OO Scale

Accurascale Class 37 37902 'British Steel Llanwern' Triple Grey Metals

Class 37 37902 'British Steel Llanwern' Triple Grey Metals Sector Features: Provided DCC ready [21Pin MTX Socket] Every model includes PowerPack / Backup Power Capacitor Bank for up to ten seconds of power free running, flicker free lighting and continuous sound as well as independently controlled, smooth coreless motorised fan. Directional lighting on DC and DCC Fully functional Headlights per prototype Engine Bay Lighting (with visible Prime Mover) Separately switched cab lighting and illuminated, details driver’s console, auto off on movement Switchable red tail lights Heavy die-cast metal chassis High-quality five-pole motor with two flywheels Metal Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a scale top speed of 100 mph (160 km/h) DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running All wheel drive and all wheel pickup Fully sprung metal buffers, extra-fine factory-installed pipework and screw couplings Correct height mini-tension-lock couplers with NEM socket as well as a fully detailed bufferbeam - OO Scale

Hornby GB Railfreight, Class 08, 0-6-0, 08818 'Molly' - Era 11

GB Railfreight, Class 08, 0-6-0, 08818 'Molly' Includes: - Accessory bag with hose pipe detail - GBRF Blue and orange livery - Cab detail - Sprung buffers - 8 Pin Socket DCC Ready - Era 11 - OO Scale

Accurascale Class 37 37414 Triple Grey Construction Sector

Class 37 37414 Triple Grey Construction Sector The introduction of Class 156 ‘Super Sprinters’ on the West Highland from January 1989 and on the Far North/Kyle lines in the May triggered an exodus of Class 37/4s to freight work. By the end of that year, Laira, Motherwell and Tinsley had gained allocations, while Immingham and Thornaby both acquired three locos each in the middle of 1990, by which point half the sub class were south of the border. One of these was No. 37414, which was on china clay duties in Cornwall until transferred to the North Lincolnshire depot’s FABI pool that September. This loco, which retained its Western Region-style lamp irons at the No.2 end only, had been repainted in the Roundel triple grey scheme with Distribution decals in August 1989, but quickly swapped these for more appropriate Construction brandings after its move. This saw it mostly outbased at Buxton in the Peak District to haul aggregates, cement and the iconic ICI limestone trains.While it wasn’t completely allergic to passenger work during this period, it moved to Crewe Diesel in November 1992 to join the RCMC Regional Railways North West pool, initially to work Liverpool Lime St/Crewe-Cardiff trains, still wearing its classic Railfreight image. In March 1993 it became the first member of the fleet to receive the new Regional Railways livery along with the name Cathays C&W Works 1846-1993, becoming a stalwart of the North Wales coast and the famed ‘club’ trains from Liverpool and Manchester Victoria. It soldiered on until it was stored by EWS in March 2000 and was scrapped at TJ Thomson’s of Stockton exactly nine years later. Features: Highly detailed OO scale model, 1:76.2 Heavy die-cast metal chassis Accurate tumbleholme, nose, cab roof and cantrail curves taken from 3D Laser scan and extensive surveys Timeframe specific details, including but not limited to; Bogies (Fabricated and three variations of Cast) Fuel tanks (As built and with later smooth-sided long range fuel tank) Early Class 37/0 features frost grille, boiler filler panel and access steps Early Class 37/0 features illuminated split headcode displays with a selection of different four-character headcodes Class 37/6 have operational WIPAC light clusters and top headlight and numerous different nose slides all including multiple working socket Three styles of buffer: large round Oleo, oval and squared oval Three styles of nose grilles: as built, refurbished ‘split’ and refurbished ‘single piece’ Boiler exhaust, and two styles of plated boiler panel With or without bufferbeam skirts With or without cab roof vents and bodyside windows Nose and roof aerials and antennas (where applicable) Three styles of windscreen: standard, centre toughened and all toughened Three styles of cab interior: as built, refurbished and modern DRS locos Four bufferbeam variations with different piping configurations Door kickplates where applicable Multiple body and nose slides to accurately represent almost every member of the class, including three variations of cantrail grille: early EE (for D6700-D6704), later EE and RSH Four roof styles: Original double riveted, single riveted, welded and welded with antennas Separately applied etched metal and high fidelity plastic detail parts, including grab handles, aerials, steps, wipers, nameplates, crests and more. Etched metal door kickplates (where applicable), ‘frost’ grille (where applicable) & super fine etched metal roof grille Scale width wire handrails Turned brass roof-mounted horns on centre headcode examples Full underbody tank detail with brackets and pipework Bogies feature separate footsteps, etched footsteps, brake cylinders, speed recorder, end brake rigging and very fine brake chain Brake blocks on trucks (bogies) in line with wheels (can be moved for EM/P4 gauges) Numerous other locomotive-specific details yet to be revealed! RP25-110 profile OO gauge wheels with fine scale ‘drop in’ EM (18.2mm gauge) and P4 (18.83mm gauge) wheels available separately Accurate high-fidelity miniature snowploughs Fully sprung metal buffers, extra-fine factory-installed pipework and screw couplings Correct height mini-tension-lock couplers with NEM socket as well as a fully detailed bufferbeam Every model includes PowerPack / Backup Power Capacitor Bank for up to ten seconds of power free running, flicker free lighting and continuous sound High Performance traction, to include; High-quality five-pole motor with two flywheels Metal Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a scale top speed of 100 mph (160 km/h) DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running All wheel drive and all wheel pickup All models include our motorised roof fan with dedicated silky smooth coreless functionality on both DC and DCC. Provided DCC ready [21Pin MTX Socket] or Factory DCC Sound Fitted [ESU LokSound 5] Directional lighting on DC and DCC Fully functional Headlights per prototype Engine Bay Lighting (with visible Prime Mover) WIPAC light clusters where appropriate with day and night-time settings Separately switched cab lighting and illuminated, details driver’s console, auto off on movement Switchable red tail lights DCC Sound Versions include: ESU LokSound V5 DCC Chip Customised Dual-Speaker Technology with; Large Accurathrash Bass Speaker Smaller 'iphone' style cube for higher frequencies DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running - OO Scale

Accurascale Class 37 37421 Colas

Class 37 37421 Colas Stored by EWS at Motherwell in March 2005 and sold for preservation at the Pontypool & Blaenavon Railway in 2009, No. 37421 was one of four Class 37s that was purchased by Colas Rail in 2013 for a return to the main line, along with Nos. 37116, 37175 and 37219. While the latter pair debuted for their new owner in the middle of 2014, it would be another year before No. 37421 would re-enter traffic along with BR green-liveried former Harry Needle Class 37/0 No. 37057/D6757, just in time to assist on the newly acquired Network Rail infrastructure monitoring contract. For the next four years, the Colas Class 37/4 was a solid performer on various test formations, until called to South Wales in May 2019 to provide power for Cardiff-Rhymney line commuter turns along with hired-in Nos. 37025 and 37418. This followed a fallow few months when the locomotive was under repair and eventually returned after a bogie swap with No. 37175. The Rhymney workings ended in March 2020 and it was back to test train work, mixed in with NR saloon duties with No. 975025 Caroline and the odd infrastructure duty. Cosmetically, towards the end of that same year it swapped its Colas ‘hard hat’ logos for new diamond stickers, although it has stubbornly retained its unique arrangement of single lamp irons on different sides of the locomotive at each end. Despite the increasing number of Colas HST power cars on the NR services, No. 37421 is still a regular atop PLPR (Plain Line Pattern Recognition) and UTU (Ultrasonic Testing Unit) formations and is expected to remain a key component of the operator’s fleet for several years to come. Features: Highly detailed OO scale model, 1:76.2 Heavy die-cast metal chassis Accurate tumbleholme, nose, cab roof and cantrail curves taken from 3D Laser scan and extensive surveys Timeframe specific details, including but not limited to; Bogies (Fabricated and three variations of Cast) Fuel tanks (As built and with later smooth-sided long range fuel tank) Early Class 37/0 features frost grille, boiler filler panel and access steps Early Class 37/0 features illuminated split headcode displays with a selection of different four-character headcodes Class 37/6 have operational WIPAC light clusters and top headlight and numerous different nose slides all including multiple working socket Three styles of buffer: large round Oleo, oval and squared oval Three styles of nose grilles: as built, refurbished ‘split’ and refurbished ‘single piece’ Boiler exhaust, and two styles of plated boiler panel With or without bufferbeam skirts With or without cab roof vents and bodyside windows Nose and roof aerials and antennas (where applicable) Three styles of windscreen: standard, centre toughened and all toughened Three styles of cab interior: as built, refurbished and modern DRS locos Four bufferbeam variations with different piping configurations Door kickplates where applicable Multiple body and nose slides to accurately represent almost every member of the class, including three variations of cantrail grille: early EE (for D6700-D6704), later EE and RSH Four roof styles: Original double riveted, single riveted, welded and welded with antennas Separately applied etched metal and high fidelity plastic detail parts, including grab handles, aerials, steps, wipers, nameplates, crests and more. Etched metal door kickplates (where applicable), ‘frost’ grille (where applicable) & super fine etched metal roof grille Scale width wire handrails Turned brass roof-mounted horns on centre headcode examples Full underbody tank detail with brackets and pipework Bogies feature separate footsteps, etched footsteps, brake cylinders, speed recorder, end brake rigging and very fine brake chain Brake blocks on trucks (bogies) in line with wheels (can be moved for EM/P4 gauges) Numerous other locomotive-specific details yet to be revealed! RP25-110 profile OO gauge wheels with fine scale ‘drop in’ EM (18.2mm gauge) and P4 (18.83mm gauge) wheels available separately Accurate high-fidelity miniature snowploughs Fully sprung metal buffers, extra-fine factory-installed pipework and screw couplings Correct height mini-tension-lock couplers with NEM socket as well as a fully detailed bufferbeam Every model includes PowerPack / Backup Power Capacitor Bank for up to ten seconds of power free running, flicker free lighting and continuous sound High Performance traction, to include; High-quality five-pole motor with two flywheels Metal Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a scale top speed of 100 mph (160 km/h) DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running All wheel drive and all wheel pickup All models include our motorised roof fan with dedicated silky smooth coreless functionality on both DC and DCC. Provided DCC ready [21Pin MTX Socket] or Factory DCC Sound Fitted [ESU LokSound 5] Directional lighting on DC and DCC Fully functional Headlights per prototype Engine Bay Lighting (with visible Prime Mover) WIPAC light clusters where appropriate with day and night-time settings Separately switched cab lighting and illuminated, details driver’s console, auto off on movement Switchable red tail lights DCC Sound Versions include: ESU LokSound V5 DCC Chip Customised Dual-Speaker Technology with; Large Accurathrash Bass Speaker Smaller 'iphone' style cube for higher frequencies DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running - OO Scale

Accurascale Class 37 37408 'Loch Rannoch' EWS

Class 37 37408 'Loch Rannoch' EWS Arguably the most popular of the Class 37/4s in the British Rail and early privatisation era, No. 37408 Loch Rannoch clinged obstinately to its large logo paint scheme – the last so adorned – until being called to Toton in mid-1998 for a repaint. Following a protracted overhaul, which included a new toughened centre window, it debuted in the revised maroon and gold of its owner EWS, sans-nameplates, in November and wasn’t reunited with its famous name until the following February. Over the next seven years, the former No. 37289 (built as D6989) was a regular performer on loco-hauled services around the country, particularly Birmingham/Crewe-Bangor/Holyhead, Cardiff-Fishguard/Rhymney and Crewe/Manchester, Leeds-Carlisle/Knaresborough and even in Scotland on the Fort William sleeper. It could also be found on a wide variety of freight and even Railtrack/Network Rail test trains and was variously allocated to Crewe Diesel, Motherwell, Cardiff Canton, Toton and Margam during this period.Outshopped in the same livery in March 2002, its rock star status meant that it was never long before it gained various accoutrements, including regular bouts of Eastfield ‘Westies’, silver buffers, white lamp irons, black headcode panels and even Immingham 40B shedplates. It seemed inevitable that Rannoch would return to large logo in due course and would have been a favourite for preservation, but after running away and colliding with its stabled rake of coaches at Rhymney on 1 August 2005 the locomotive was stored and repairs were not authorised. It was eventually scrapped at EMR Kingsbury in January 2008. Features: Highly detailed OO scale model, 1:76.2 Heavy die-cast metal chassis Accurate tumbleholme, nose, cab roof and cantrail curves taken from 3D Laser scan and extensive surveys Timeframe specific details, including but not limited to; Bogies (Fabricated and three variations of Cast) Fuel tanks (As built and with later smooth-sided long range fuel tank) Early Class 37/0 features frost grille, boiler filler panel and access steps Early Class 37/0 features illuminated split headcode displays with a selection of different four-character headcodes Class 37/6 have operational WIPAC light clusters and top headlight and numerous different nose slides all including multiple working socket Three styles of buffer: large round Oleo, oval and squared oval Three styles of nose grilles: as built, refurbished ‘split’ and refurbished ‘single piece’ Boiler exhaust, and two styles of plated boiler panel With or without bufferbeam skirts With or without cab roof vents and bodyside windows Nose and roof aerials and antennas (where applicable) Three styles of windscreen: standard, centre toughened and all toughened Three styles of cab interior: as built, refurbished and modern DRS locos Four bufferbeam variations with different piping configurations Door kickplates where applicable Multiple body and nose slides to accurately represent almost every member of the class, including three variations of cantrail grille: early EE (for D6700-D6704), later EE and RSH Four roof styles: Original double riveted, single riveted, welded and welded with antennas Separately applied etched metal and high fidelity plastic detail parts, including grab handles, aerials, steps, wipers, nameplates, crests and more. Etched metal door kickplates (where applicable), ‘frost’ grille (where applicable) & super fine etched metal roof grille Scale width wire handrails Turned brass roof-mounted horns on centre headcode examples Full underbody tank detail with brackets and pipework Bogies feature separate footsteps, etched footsteps, brake cylinders, speed recorder, end brake rigging and very fine brake chain Brake blocks on trucks (bogies) in line with wheels (can be moved for EM/P4 gauges) Numerous other locomotive-specific details yet to be revealed! RP25-110 profile OO gauge wheels with fine scale ‘drop in’ EM (18.2mm gauge) and P4 (18.83mm gauge) wheels available separately Accurate high-fidelity miniature snowploughs Fully sprung metal buffers, extra-fine factory-installed pipework and screw couplings Correct height mini-tension-lock couplers with NEM socket as well as a fully detailed bufferbeam Every model includes PowerPack / Backup Power Capacitor Bank for up to ten seconds of power free running, flicker free lighting and continuous sound High Performance traction, to include; High-quality five-pole motor with two flywheels Metal Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a scale top speed of 100 mph (160 km/h) DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running All wheel drive and all wheel pickup All models include our motorised roof fan with dedicated silky smooth coreless functionality on both DC and DCC. Provided DCC ready [21Pin MTX Socket] or Factory DCC Sound Fitted [ESU LokSound 5] Directional lighting on DC and DCC Fully functional Headlights per prototype Engine Bay Lighting (with visible Prime Mover) WIPAC light clusters where appropriate with day and night-time settings Separately switched cab lighting and illuminated, details driver’s console, auto off on movement Switchable red tail lights DCC Sound Versions include: ESU LokSound V5 DCC Chip Customised Dual-Speaker Technology with; Large Accurathrash Bass Speaker Smaller 'iphone' style cube for higher frequencies DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running - OO Scale

Rapido UK OAA Triple Pack - Civil Link

OAA Triple Pack - Civil Link Includes: - OAA Triple Pack - Civil Link livery - Injection moulded construction - Wealth of body and underframe details - Metal wheels - NEM coupler pockets - 1/148 Scale (N gauge)

Rapido UK OAA Triple Pack - Bauxite

OAA Triple Pack - Bauxite Includes: - OAA Triple Pack - Bauxite - Injection moulded construction - Wealth of body and underframe details - Metal wheels - NEM coupler pockets - 1/148 Scale (N gauge)

Rapido UK OAA Triple Pack - Bauxite with ABN yellow spot.

OAA Triple Pack - Bauxite with ABN yellow spot Includes: - OAA Triple Pack - Bauxite with ABN yellow spot - Injection moulded construction - Wealth of body and underframe details - Metal wheels - NEM coupler pockets - 1/148 Scale (N gauge)

DCC Concepts Inter-Baseboard Connectors (2 Pack)

Inter-Baseboard Connectors (2 Pack) These clever pluggable screw-terminal connectors allow you to easily connect baseboard power with plug-and-socket connections! Suitable for DC or DCC on systems up to 5 Amps. Includes: - 2x Pluggable Screw-Terminal Connectors - Ferruled Connector Wire - Fixing Screws - Spare Ferrules (will require a crimping tool to use the spares)

Accurascale Class 66 66789 'British Rail 1948 - 1997' GBRF BR Large Logo

Class 66 66789 'British Rail 1948 - 1997' GBRF BR Large Logo Arriving in the uk aboard MV Fairload on the 23rd June 2000, this locomotive was originally numbered 66250 and was the last EWS class 66 as part of their “red revolution” which had started with 66001 just a few years earlier. As part of a restructuring, EWS offered several locomotives for sale and 66250 was quired by GBRF in 2017 and was allocated the new number 66789. Unveiled on the 27th Feb 2018, 66789 sports a homage to the British Rail large logo blue livery to commemorate the 70th anniversary of the formation of British Railways back in 1948. Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Accurascale Class 66 66789 'British Rail 1948 - 1997' GBRF BR - DCC Sound

Class 66 66789 'British Rail 1948 - 1997' GBRF BR Large Logo - DCC Sound Arriving in the uk aboard MV Fairload on the 23rd June 2000, this locomotive was originally numbered 66250 and was the last EWS class 66 as part of their “red revolution” which had started with 66001 just a few years earlier. As part of a restructuring, EWS offered several locomotives for sale and 66250 was quired by GBRF in 2017 and was allocated the new number 66789. Unveiled on the 27th Feb 2018, 66789 sports a homage to the British Rail large logo blue livery to commemorate the 70th anniversary of the formation of British Railways back in 1948. Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Accurascale Class 66 66142 'Maritime Intermodal Three' DB - DCC Sound

Class 66 66142 'Maritime Intermodal Three' DB Maritime Blue - DCC Sound Once an anonymous EWS maroon and gold class 66, 66142 led the life of a typical EWS 66 from its delivery during August 1999 right through the acquisition by DB up until its turn in the paintshop came in 2019 at the ripe age of 20 years old! Rather than the bright red of DB, 66142 gained the vibrant blue colour of Maritime Intermodal and was named “Maritime Intermodal Three”. Following Accurascale handing out free 'a' stickers at Warley in 2022, a number of these have found their way in to a wide variety of places, including on real rolling stock. 66142 is one such locomotive and proudly wears its 'a' sticker under one set of numbers Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Accurascale Class 66 66142 'Maritime Intermodal Three' DB Maritime Blue

Class 66 66142 'Maritime Intermodal Three' DB Maritime Blue Once an anonymous EWS maroon and gold class 66, 66142 led the life of a typical EWS 66 from its delivery during August 1999 right through the acquisition by DB up until its turn in the paintshop came in 2019 at the ripe age of 20 years old! Rather than the bright red of DB, 66142 gained the vibrant blue colour of Maritime Intermodal and was named “Maritime Intermodal Three”. Following Accurascale handing out free 'a' stickers at Warley in 2022, a number of these have found their way in to a wide variety of places, including on real rolling stock. 66142 is one such locomotive and proudly wears its 'a' sticker under one set of numbers Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Hornby BR Class 56 56060 'The Cardiff Rod Mill' (Sound Fitted)

BR Railfreight, Class 56, Co-Co, 56060 'The Cardiff Rod Mill' - Era 8 (TXS DCC Sound Fitted)  Includes: - Highly detailed with fine grill parts - BR railfreight two tone grey livery - Metal Sector logo - TXS DCC Sound Fitted    (NOTE: This model and sound functions can ONLY be operated with the HM7000 App via bluetooth or a DCC digital controller) - Accessory bag - Sprung buffers - NEM couplings and pockets - 5 pole motor - Model will traverse 2nd radius curves minimum (R606/R607) - Era 8 - OO Scale

Bachmann BR Mk1 TSO Tourist Second Open BR (WR) Chocolate & Cream W3802

BR Mk1 TSO Tourist Second Open BR (WR) Chocolate & Cream W3802 Features: BR1 Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm The Bachmann Branchline Mk1 Coaches have long been the model of choice for the discerning enthusiast wishing to add the iconic Mk1 Coach to their collection and today, these models continue to provide OO scale modellers with the finest models, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard tension lock coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. - Era 5 - OO Scale

Bachmann BR Mk1 RMB Restaurant Miniature Buffet BR Maroon SC1839

BR Mk1 RMB Restaurant Miniature Buffet BR Maroon SC1839 Features: Commonwealth Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm The Bachmann Branchline Mk1 Coaches have long been the model of choice for the discerning enthusiast wishing to add the iconic Mk1 Coach to their collection and today, these models continue to provide OO scale modellers with the finest models, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard tension lock coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. - Era 5 - OO Scale

Bachmann BR Mk1 RMB Restaurant Miniature Buffet BR Maroon [PF] SC1839

BR Mk1 RMB Restaurant Miniature Buffet BR Maroon [PF] SC1839 Features: Passenger Fitted Commonwealth Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm The Bachmann Branchline Mk1 Coaches have long been the model of choice for the discerning enthusiast wishing to add the iconic Mk1 Coach to their collection and today, these models continue to provide OO scale modellers with the finest models, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard tension lock coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. - Era 5 - OO Scale

Bachmann BR Mk1 RU Restaurant Unclassified BR (WR) Choc &Cream [PF] W1905

BR Mk1 RU Restaurant Unclassified BR (WR) Chocolate & Cream [PF] W1905 Features: Passenger Fitted BR1 Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm The Bachmann Branchline Mk1 Coaches have long been the model of choice for the discerning enthusiast wishing to add the iconic Mk1 Coach to their collection and today, these models continue to provide OO scale modellers with the finest models, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard tension lock coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. - Era 5 - OO Scale

Bachmann BR Mk1 RU Restaurant Unclassified BR (WR) Chocolate &Cream W1905

BR Mk1 RU Restaurant Unclassified BR (WR) Chocolate & Cream W1905 Features: BR1 Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm The Bachmann Branchline Mk1 Coaches have long been the model of choice for the discerning enthusiast wishing to add the iconic Mk1 Coach to their collection and today, these models continue to provide OO scale modellers with the finest models, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard tension lock coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. - Era 5 - OO Scale  

Bachmann BR Mk1 RMB Restaurant Miniature Buffet BR InterCity (Exec) 1848

BR Mk1 RMB Restaurant Miniature Buffet BR InterCity (Executive) 1848 Features: Commonwealth Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm The Bachmann Branchline Mk1 Coaches have long been the model of choice for the discerning enthusiast wishing to add the iconic Mk1 Coach to their collection and today, these models continue to provide OO scale modellers with the finest models, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard tension lock coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. - Era 8 - OO Scale

Bachmann BR Mk1 RMB Restaurant Mini Buffet BR InterCity (Exec) [PF]1848

BR Mk1 RMB Restaurant Miniature Buffet BR InterCity (Executive) [PF] 1848 Features: Passenger Fitted Commonwealth Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm The Bachmann Branchline Mk1 Coaches have long been the model of choice for the discerning enthusiast wishing to add the iconic Mk1 Coach to their collection and today, these models continue to provide OO scale modellers with the finest models, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard tension lock coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. - Era 8 - OO Scale

Bachmann BR Mk1 NEA (Ex-BG) Brake Gangwayed BR Provincial E92089

BR Mk1 NEA (Ex-BG) Brake Gangwayed BR Provincial E92089 Features: B4 Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 245mm The Bachmann Branchline Mk1 Coaches have long been the model of choice for the discerning enthusiast wishing to add the iconic Mk1 Coach to their collection and today, these models continue to provide OO scale modellers with the finest models, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard tension lock coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. - Era 8 - OO Scale

Bachmann BR Mk1 NEX (Ex-BG) Brake Gangwayed Rail Express Systems 92303

BR Mk1 NEX (Ex-BG) Brake Gangwayed Rail Express Systems 92303 Features: Commonwealth Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 245mm The Bachmann Branchline Mk1 Coaches have long been the model of choice for the discerning enthusiast wishing to add the iconic Mk1 Coach to their collection and today, these models continue to provide OO scale modellers with the finest models, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard tension lock coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. - Era 8 - OO Scale

Bachmann BR Mk1 FK First Corridor BR (WR) Chocolate & Cream W13079

BR Mk1 FK First Corridor BR (WR) Chocolate & Cream W13079 Features: BR1 Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm The Bachmann Branchline Mk1 Coaches have long been the model of choice for the discerning enthusiast wishing to add the iconic Mk1 Coach to their collection and today, these models continue to provide OO scale modellers with the finest models, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard tension lock coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. - Era 5 - OO Scale

Bachmann BR Mk1 FK First Corridor BR (WR) Chocolate & Cream [PF] W13079

BR Mk1 FK First Corridor BR (WR) Chocolate & Cream [PF] W13079 Features: Passenger Fitted BR1 Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm The Bachmann Branchline Mk1 Coaches have long been the model of choice for the discerning enthusiast wishing to add the iconic Mk1 Coach to their collection and today, these models continue to provide OO scale modellers with the finest models, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard tension lock coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. - Era 5 - OO Scale

Bachmann BR Mk1 CK Composite Corridor BR (WR) Chocolate & Cream W15801

BR Mk1 CK Composite Corridor BR (WR) Chocolate & Cream W15801 Features: BR1 Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm The Bachmann Branchline Mk1 Coaches have long been the model of choice for the discerning enthusiast wishing to add the iconic Mk1 Coach to their collection and today, these models continue to provide OO scale modellers with the finest models, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard tension lock coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. - Era 5 - OO Scale

Bachmann BR Mk1 BG Brake Gangwayed BR (SR) Green S84039

BR Mk1 BG Brake Gangwayed BR (SR) Green S84039 Features: BR1 Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 245mm The Bachmann Branchline Mk1 Coaches have long been the model of choice for the discerning enthusiast wishing to add the iconic Mk1 Coach to their collection and today, these models continue to provide OO scale modellers with the finest models, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard tension lock coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. - Era 5 - OO Scale

Bachmann BR Mk1 BG Brake Gangwayed BR (WR) Chocolate & Cream W81242

BR Mk1 BG Brake Gangwayed BR (WR) Chocolate & Cream W81242 Features: BR1 Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 245mm The Bachmann Branchline Mk1 Coaches have long been the model of choice for the discerning enthusiast wishing to add the iconic Mk1 Coach to their collection and today, these models continue to provide OO scale modellers with the finest models, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard tension lock coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. - Era 5 - OO Scale

Bachmann BR Mk1 BG Brake Gangwayed BR Maroon SC84362

BR Mk1 BG Brake Gangwayed BR Maroon SC84362 Features: BR1 Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 245mm The Bachmann Branchline Mk1 Coaches have long been the model of choice for the discerning enthusiast wishing to add the iconic Mk1 Coach to their collection and today, these models continue to provide OO scale modellers with the finest models, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard tension lock coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. - Era 5 - OO Scale

Bachmann Class 09 09106 DB Red (Unbranded) DCC Deluxe S/F

Class 09 09106 DB Red (Unbranded) 09106 DCC Deluxe Sound Fitted Details Variations Specific To This Model: Pristine DB Red (Unbranded) livery Running No. 09106 Box Profile Main Frames Concealed Bodyside Door Hinges Radiator Ladders Removed Steel Cab Door OLEO Buffers Dual Brakes 2 Front Marker Lights (with rounded bottom housings) 2 Front Lamp Irons (middle pair removed) 2 Rear Marker Lights (with rounded bottom housings) 2 Rear Lamp Irons (middle pair removed) Standard Cab Panel (without Stiffening Ribs) Whistle Cab Roof Radio Pod Equipment Boxes (RHS) with Raised Doors and Recessed Latches External Fuel Pump Air Compressor Cabinet (LHS) Buckeye Coupler Fitted Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 122mm Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at both ends Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Fully operational front and rear lights with two, four or six lights dependent on the prototype being modelled Eight microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configuration of the front and rear lights when operated on DCC or Analogue control Shunting lights (one red and one white light at each end) operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control Front and rear lights can be turned on/off independently via two dedicated functions on DCC, or using two easy access microswitches on Analogue control Authentic light colours and temperatures selected for each model based on era and application A quality speaker employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Sound files produced specifically for the Bachmann Branchline Class 08 using recordings from real locomotives The Class 08 Diesel Shunter was BR’s most numerous diesel locomotive type (totalling more than 1,000 examples alongside its Class 09 and Class 10 counterparts) and models of this icon have long been a staple of the Bachmann Branchline range. However, this brand-new 08 owes nothing to its predecessors and finally brings the story of the humble diesel shunter right up to date with this most accurate of OO scale renditions. Constructed from high fidelity mouldings, the new Branchline model employs a wealth of separately fitted details, including various metal components, and offers countless combinations of details and variations to allow individual locomotives to be modelled accurately at a chosen time in history. This external beauty is brought to life by the exquisite livery application which uses true-to-prototype colours, fonts and logos – extending beyond the exterior to the cab interior which itself is highly detailed and decorated accordingly. Meanwhile, ‘under the bonnet’ the model boasts a high specification that utilises the latest advancements in model railway technology. For the first time a full suite of lighting, including up to 13 separate lights, is fitted and can be enjoyed by both analogue and DCC users – whilst the new shunter is the first model to employ Bachmann’s Bach-Up stay alive system, providing DCC users with a reserve power supply for uninterrupted running even on dirty or uneven track. - Era 7 - OO Scale

Bachmann Class 08 08761 BR Provincial

Class 08 08761 BR Provincial 08761 Details Variations Specific To This Model: Pristine BR Provincial livery Running No. 08761 Box Profile Main Frames Concealed Bodyside Door Hinges Radiator Ladders Removed Steel Cab Door OLEO Buffers Dual Brakes 2 Front Marker Lights (with rounded bottom housings) 3 Front Lamp Irons (lower middle lamp iron removed, top lamp iron of flat bar profile) 2 Rear Marker Lights (with rounded bottom housings) 3 Rear Lamp Irons (lower middle lamp iron removed) Standard Cab Panel (without Stiffening Ribs) Whistle Cab Roof Vent Equipment Boxes (RHS) with Raised Doors and Recessed Latches Air Compressor Cabinet (LHS) Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 122mm Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at both ends Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Fully operational front and rear lights with two, four or six lights dependent on the prototype being modelled Eight microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configuration of the front and rear lights when operated on DCC or Analogue control Shunting lights (one red and one white light at each end) operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control Front and rear lights can be turned on/off independently via two dedicated functions on DCC, or using two easy access microswitches on Analogue control Authentic light colours and temperatures selected for each model based on era and application A quality speaker employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Sound files produced specifically for the Bachmann Branchline Class 08 using recordings from real locomotives The Class 08 Diesel Shunter was BR’s most numerous diesel locomotive type (totalling more than 1,000 examples alongside its Class 09 and Class 10 counterparts) and models of this icon have long been a staple of the Bachmann Branchline range. However, this brand-new 08 owes nothing to its predecessors and finally brings the story of the humble diesel shunter right up to date with this most accurate of OO scale renditions. Constructed from high fidelity mouldings, the new Branchline model employs a wealth of separately fitted details, including various metal components, and offers countless combinations of details and variations to allow individual locomotives to be modelled accurately at a chosen time in history. This external beauty is brought to life by the exquisite livery application which uses true-to-prototype colours, fonts and logos – extending beyond the exterior to the cab interior which itself is highly detailed and decorated accordingly. Meanwhile, ‘under the bonnet’ the model boasts a high specification that utilises the latest advancements in model railway technology. For the first time a full suite of lighting, including up to 13 separate lights, is fitted and can be enjoyed by both analogue and DCC users – whilst the new shunter is the first model to employ Bachmann’s Bach-Up stay alive system, providing DCC users with a reserve power supply for uninterrupted running even on dirty or uneven track. - Era 8 - OO Scale

Bachmann Class 08 08928 BR Railfreight (Red Stripe)

Class 08 08928 BR Railfreight (Red Stripe) 08928 Details Variations Specific To This Model: Pristine BR Railfreight (Red Stripe) livery Running No. 08928 Box Profile Main Frames Concealed Bodyside Door Hinges Radiator Ladders Removed Steel Cab Door LMS Pattern Buffers Dual Brakes 2 Front Marker Lights (with rounded bottom housings) 2 Front Lamp Irons (middle pair removed) 2 Rear Marker Lights (with rounded bottom housings) 2 Rear Lamp Irons (middle pair removed) Standard Cab Panel (without Stiffening Ribs) Whistle Cab Roof Vent Equipment Boxes (RHS) with Raised Doors and Recessed Latches External Fuel Pump Air Compressor Cabinet (LHS) Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 122mm Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at both ends Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Fully operational front and rear lights with two, four or six lights dependent on the prototype being modelled Eight microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configuration of the front and rear lights when operated on DCC or Analogue control Shunting lights (one red and one white light at each end) operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control Front and rear lights can be turned on/off independently via two dedicated functions on DCC, or using two easy access microswitches on Analogue control Authentic light colours and temperatures selected for each model based on era and application A quality speaker employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Sound files produced specifically for the Bachmann Branchline Class 08 using recordings from real locomotives The Class 08 Diesel Shunter was BR’s most numerous diesel locomotive type (totalling more than 1,000 examples alongside its Class 09 and Class 10 counterparts) and models of this icon have long been a staple of the Bachmann Branchline range. However, this brand-new 08 owes nothing to its predecessors and finally brings the story of the humble diesel shunter right up to date with this most accurate of OO scale renditions. Constructed from high fidelity mouldings, the new Branchline model employs a wealth of separately fitted details, including various metal components, and offers countless combinations of details and variations to allow individual locomotives to be modelled accurately at a chosen time in history. This external beauty is brought to life by the exquisite livery application which uses true-to-prototype colours, fonts and logos – extending beyond the exterior to the cab interior which itself is highly detailed and decorated accordingly. Meanwhile, ‘under the bonnet’ the model boasts a high specification that utilises the latest advancements in model railway technology. For the first time a full suite of lighting, including up to 13 separate lights, is fitted and can be enjoyed by both analogue and DCC users – whilst the new shunter is the first model to employ Bachmann’s Bach-Up stay alive system, providing DCC users with a reserve power supply for uninterrupted running even on dirty or uneven track. - Era 8 - OO Scale

Bachmann BR MK1 RB Restaurant Buffet BR (SR) Green S1767 (OO)

BR MK1 RB Restaurant Buffet BR (SR) Green S1767 Features: Pristine BR (SR) Green livery Running No. S1767 Commonwealth Bogies End Steps Removed Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm - Era 5 - OO Scale

Bachmann BR MK1 RB Restaurant Buffet BR Chocolate & Cream W1732 (OO)

BR MK1 RB Restaurant Buffet BR Chocolate & Cream W1732 Features: Pristine BR Chocolate & Cream livery Running No. W1732 BR2 Bogies End Steps Removed Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm - Era 5 - OO Scale

Bachmann BR MK1 RB Restaurant Buffet BR Maroon E1664 (OO)

BR MK1 RB Restaurant Buffet BR Maroon E1664 Features: Pristine BR Maroon livery Running No. SC1658 Commonwealth Bogies End Steps Removed Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm - Era 5 - OO Scale

Bachmann BR MK1 RB Restaurant Buffet BR Maroon SC1658 (OO)

BR MK1 RB Restaurant Buffet BR Maroon SC1658 Features: Pristine BR Maroon livery Running No. E1664 Commonwealth Bogies End Steps Removed Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm - Era 5 - OO Scale

Bachmann BR MK1 BSO Brake Second Open BR Maroon SC9357 (OO)

BR MK1 BSO Brake Second Open BR Maroon SC9357 Features: Pristine BR Maroon livery Running No. SC9357 BR1 Bogies Roof Periscopes End Steps Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm - Era 5 - OO Scale

Bachmann BR MK1 FO First Open BR Crimson & Cream E3048 (OO)

BR MK1 FO First Open BR Crimson & Cream E3048 Features: Pristine BR Crimson & Cream livery Running No. E3048 BR1 Bogies End Steps Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm - Era 4 - OO Scale

Bachmann BR MK1 FO First Open BR Crimson & Cream M3043 (OO)

BR MK1 FO First Open BR Crimson & Cream M3043 Features: Pristine BR Crimson & Cream livery Running No. M3043 BR1 Bogies End Steps Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm - Era 4 - OO Scale

Bachmann BR MK1 FO First Open BR Maroon SC3102 (OO)

BR MK1 FO First Open BR Maroon SC3102 Features: Pristine BR Maroon livery Running No. SC3102 Commonwealth Bogies End Steps Removed Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm - Era 5 - OO Scale

Airfix Starter Set: RNLI Shannon Class Lifeboat (1:72)

Starter Set - RNLI Shannon Class Lifeboat Includes: - Detailed plastic kit - Full details of the outside deck, hull and fittings are included - Fully detailed interior - Clear glazing parts - Waterslide transfers/decals will allow any one of the current operational RNLI Severn class lifeboats to be modelled.  - Waterslide transfers/decals - Glue, paint and brushes included Dimensions: - Length - 19cm - Width - 6.3cm - 54 Parts - 1:72 Scale Ship information: In the serious business of saving lives at sea, the brave volunteer crews of Britain's RNLI service need access to the most capable craft to safely effect rescues in some of the most challenging conditions. In the Shannon Class Lifeboat, they have a cutting-edge vessel which is as capable as it is versatile, able to be launched and recovered from a beach using a mobile slipway and powered by waterjets, which provide it with both speed and incredible controllability.  Designed to operate in all weathers, this amazing vessel supports RNLI crews in continuing their proud lifesaving tradition which spans almost 200 years. A minimum of £0.90 from the sale of this product will be paid in support of the RNLI.  Payments are made to RNLI (Sales) Ltd (which pays all its taxable profits to the RNLI, a charity registered in England and Wales (209603), Scotland (SC037736), the Republic of Ireland (20003326), the Bailiwick of Jersey (14), the Isle of Man and the Bailiwick of Guernsey and Alderney, of West Quay Road, Poole, Dorset BH15 1HZ).

Airfix Bristol Beaufort Mk.IA (1:72)

Bristol Beaufort Mk.IA Includes: - Detailed plastic kit - Cockpit interior detail - Detailed clear canopy parts - Pilots - Engine and prop parts - Optional undercarriage (up or down positions) - Armaments includes gunner turrets - Waterslide transfers for two different schemes: - Kit requires glue and paint to complete NOT included - Length - 18.6cm - Height - 6.08cm - Width - 24.4cm - 159 Parts - 1:72 Scale  

Corgi Ford Mustang Mk6 Mach 1 Grabber Yellow

Ford Mustang Mk6 Mach 1 Grabber Yellow Includes: - Detailed diecast model - Front, headlight and grill detailing - Spoiler detail - Fine Alloy and brakes - Interior detail - Display stand  - Collectors Card - 1:43 Scale Vehicle information: The iconic Mach 1 nameplate appeared for the first time on a UK-market, right-hand drive Mustang in the summer of 2021, and this new more performance-oriented Mustang was instantly recognisable by its redesigned front splitter and graphics. Advertised as 'the most track-capable Mustang ever to grace UK shores', its specification was very impressive and included MagneRide® adjustable dampers, a Tremec six-speed manual transmission with rev-matching technology for seamless down-shifts, a limited-slip differential, and an upgraded oil-cooler to keep the 454bhp 5-litre V8 cool whilst exploiting its prodigious performance. In true Ford tradition, at only £55,185, it was also fantastic value for money as the few cars available offering comparable performance were considerably more expensive. The example modelled was added to Ford's Press Fleet on September 2nd, 2021, and retained until February 17th, 2023. During that time, it was used for Ford's corporate events or track driving days, and it appeared on TV twice, in the Wheeler Dealers' Yellow Car Special and BBC Top Gear's Christmas Special. It was also loaned to various magazines and newspapers for road-testing, including The Sunday Times, The Sun, The Mirror, Top Gear Magazine, Goodwood Media, What Car and Autocar. For the final ten months of its PR duties, it was on long-term test with CAR magazine, mainly in the care of the magazine's then deputy features editor, James Taylor, who was a big fan of the Mach 1's handling and character.

Corgi Ford Focus Mk3 RS, Shadow Black

Ford Focus Mk3 RS, Shadow Black  Includes: - Detailed diecast model - Front, headlight and grill detailing - Spoiler detail - Fine Alloy and brakes - Interior detail - Display stand  - Collectors Card - 1:43 Scale Vehicle information: The Focus RS modelled was first registered on June 17th, 2017, by dealers Jennings Ford of Middlesbrough, North Yorkshire. Since May 2023 it's been owned by its third keeper, Lynn Dumpleton, the editor of the RS Owners Club's magazine Rallye News, who lives in North Wales. Lynn is a lifelong fast Ford enthusiast and could not resist adding this low-mileage example of Ford's last petrol-powered RS to her collection. The car was ordered with most of the available options including the Luxury Pack, which cost an extra £1000 on top of the retail price of £29,995 and included rear parking sensors, powerfold door mirrors, keyless entry, privacy glass, cruise control, and a speed limiter. The first owner also requested 19” black forged alloy wheels that cost an extra £595, shadow black premium paint, which cost an additional £525, and the Ford SYNC3 Nav System with 10 premium Sony Speakers, a sub-woofer and a rear camera, which was another £465. The blue-painted brake callipers were a mere £100, and door edge protectors, at £85, completed the list. The only option left unticked was the Race Style RS Recaro shell seats, which would have cost an extra £1145 and reduced the car's practicality. Lynn enjoys taking the car to RSOC events and was particularly pleased to use it as the safety car on the club's anniversary parade lap of the Donnington Park race circuit during the 2023 RSOC National Day.

Airfix QuickBuild QUICKBUILD Sherman Firefly Tank (1:35)

QUICKBUILD Sherman Firefly Tank - 1:35 scale Includes: - Stickers/transfers - Easy clip together construction with durability and designed for strong play value - NO Glue, NO Paint required - 1:35 Scale Product information: What is QUICKBUILD? Airfix QUICKBUILD is an exciting range of brick-based models suitable as an introduction to modelling for any age of 6 and up. The pre-coloured pieces simply push together to build an impressive model which can then be decorated with the included self-adhesive stickers.  No paint or glue is needed to make these fantastic models look like the real thing and once completed, there’s no evidence of any of the brick fittings showing. When built they are tough enough to be used as toys, or smart enough to use as display models.  Either will show off those great modelling skills! Included with each model is a full set of easy-to-follow colour instructions, free-rolling wheels for cars and tanks, and display stands for all the aircraft.  The Sherman Firefly is an excellent choice for someone who wants functionality within a kit. Designed to 1:35 scale, the turret is fully poseable, including moving wheels and tracks, which are also individually linked.  As Allied forces began to move off the D-Day beaches and into the Normandy countryside, they knew they would be facing strong opposition from German Panzer units, including the feared Heavy Tank Battalions.  Fortunately, they now had a tank which was capable of taking on the Tigers and Panthers, in the form of the Sherman Firefly, a British-designed marriage of the M4 Sherman and their famous 17-pounder anti-tank gun.  Usually deployed in a ratio of one Firefly to four standard Shermans, German tank commanders soon learned to look for the longer barrel of the Firefly and attempt to knock these tanks out first. To make identification more difficult, British crews camouflaged the front of their guns with light-coloured paint, giving their tank the appearance of a standard 75mm-equipped Sherman, hoping this deception would give them enough time to get in the first shot during any engagement.

Bachmann HRA Bogie Hopper DB Cargo 41 70 6723 036-3 (OO)

HRA Bogie Hopper DB Cargo 41 70 6723 036-3 The HRA Bogie Hopper Wagon is the next modern freight wagon to receive the Bachmann Branchline treatment and this model sports the vibrant red livery of DB Cargo. The first HRA entered traffic in 2017, being created by cutting down the HTA wagons, of which more than 1,000 were built for EWS to transport coal. With the phasing out of coal fired power stations, a new use for the HTAs was needed. As stone is far denser than coal, repurposing HTA wagons for aggregate was inefficient as they could not be fully loaded before becoming overweight, therefore shortening the wagons allowed the same payload to be moved with a shorter length train than if unmodified HTAs were used. To create the HRAs, one hopper bay is removed from the HTA before the two ends are welded back together, and these changes are faithfully reproduced on these OO scale models. The ‘cut and shut’ nature of the rebuilds is evidenced by the weld lines midway along the wagon sides and these marks are captured in model form, along with details such as the hopper doors, handwheels and separate pipe runs. Each wagon runs on bogies fitted with metal wheelsets and comes pre-fitted with buckeye couplings – as fitted to most of the prototypes. Standard tension lock couplings which fit into the NEM coupling pockets on the bogies are supplied for optional fitting. DB Cargo’s bright red provides the base colour, against which the logo, safety warnings, instructions and TOPS information all in white contrasts. Buffers are also supplied as optional fittings, allowing wagons to be configured as ‘inners’ without any buffers or as ‘outers’ which usually carry buffers at one end only. Features: Pristine DB Cargo livery Running No. 41 70 6723 036-3 Accessory Pack NEM Coupling Pockets Length 192mm - Era 9 - OO Scale

Bachmann HRA Bogie Hopper DB Cargo 41 70 6723 062-9 (OO)

HRA Bogie Hopper DB Cargo 41 70 6723 062-9  The HRA Bogie Hopper Wagon is the next modern freight wagon to receive the Bachmann Branchline treatment and this model sports the vibrant red livery of DB Cargo. The first HRA entered traffic in 2017, being created by cutting down the HTA wagons, of which more than 1,000 were built for EWS to transport coal. With the phasing out of coal fired power stations, a new use for the HTAs was needed. As stone is far denser than coal, repurposing HTA wagons for aggregate was inefficient as they could not be fully loaded before becoming overweight, therefore shortening the wagons allowed the same payload to be moved with a shorter length train than if unmodified HTAs were used. To create the HRAs, one hopper bay is removed from the HTA before the two ends are welded back together, and these changes are faithfully reproduced on these OO scale models. The ‘cut and shut’ nature of the rebuilds is evidenced by the weld lines midway along the wagon sides and these marks are captured in model form, along with details such as the hopper doors, handwheels and separate pipe runs. Each wagon runs on bogies fitted with metal wheelsets and comes pre-fitted with buckeye couplings – as fitted to most of the prototypes. Standard tension lock couplings which fit into the NEM coupling pockets on the bogies are supplied for optional fitting. DB Cargo’s bright red provides the base colour, against which the logo, safety warnings, instructions and TOPS information all in white contrasts. Buffers are also supplied as optional fittings, allowing wagons to be configured as ‘inners’ without any buffers or as ‘outers’ which usually carry buffers at one end only. Features: Pristine DB Cargo livery Running No. 41 70 6723 062-9 Accessory Pack NEM Coupling Pockets Length 192mm - Era 9 - OO Scale

Bachmann HRA Bogie Hopper DB Cargo 41 70 6723 073-6 (OO)

HRA Bogie Hopper DB Cargo 41 70 6723 073-6  The HRA Bogie Hopper Wagon is the next modern freight wagon to receive the Bachmann Branchline treatment and this model sports the vibrant red livery of DB Cargo. The first HRA entered traffic in 2017, being created by cutting down the HTA wagons, of which more than 1,000 were built for EWS to transport coal. With the phasing out of coal fired power stations, a new use for the HTAs was needed. As stone is far denser than coal, repurposing HTA wagons for aggregate was inefficient as they could not be fully loaded before becoming overweight, therefore shortening the wagons allowed the same payload to be moved with a shorter length train than if unmodified HTAs were used. To create the HRAs, one hopper bay is removed from the HTA before the two ends are welded back together, and these changes are faithfully reproduced on these OO scale models. The ‘cut and shut’ nature of the rebuilds is evidenced by the weld lines midway along the wagon sides and these marks are captured in model form, along with details such as the hopper doors, handwheels and separate pipe runs. Each wagon runs on bogies fitted with metal wheelsets and comes pre-fitted with buckeye couplings – as fitted to most of the prototypes. Standard tension lock couplings which fit into the NEM coupling pockets on the bogies are supplied for optional fitting. DB Cargo’s bright red provides the base colour, against which the logo, safety warnings, instructions and TOPS information all in white contrasts. Buffers are also supplied as optional fittings, allowing wagons to be configured as ‘inners’ without any buffers or as ‘outers’ which usually carry buffers at one end only. Features: Pristine DB Cargo livery Running No. 41 70 6723 073-6  Accessory Pack NEM Coupling Pockets Length 192mm - Era 9 - OO Scale

Bachmann HRA Bogie Hopper DB Cargo 41 70 6723 101-5 (OO)

HRA Bogie Hopper DB Cargo 41 70 6723 101-5 The HRA Bogie Hopper Wagon is the next modern freight wagon to receive the Bachmann Branchline treatment and this model sports the vibrant red livery of DB Cargo. The first HRA entered traffic in 2017, being created by cutting down the HTA wagons, of which more than 1,000 were built for EWS to transport coal. With the phasing out of coal fired power stations, a new use for the HTAs was needed. As stone is far denser than coal, repurposing HTA wagons for aggregate was inefficient as they could not be fully loaded before becoming overweight, therefore shortening the wagons allowed the same payload to be moved with a shorter length train than if unmodified HTAs were used. To create the HRAs, one hopper bay is removed from the HTA before the two ends are welded back together, and these changes are faithfully reproduced on these OO scale models. The ‘cut and shut’ nature of the rebuilds is evidenced by the weld lines midway along the wagon sides and these marks are captured in model form, along with details such as the hopper doors, handwheels and separate pipe runs. Each wagon runs on bogies fitted with metal wheelsets and comes pre-fitted with buckeye couplings – as fitted to most of the prototypes. Standard tension lock couplings which fit into the NEM coupling pockets on the bogies are supplied for optional fitting. DB Cargo’s bright red provides the base colour, against which the logo, safety warnings, instructions and TOPS information all in white contrasts. Buffers are also supplied as optional fittings, allowing wagons to be configured as ‘inners’ without any buffers or as ‘outers’ which usually carry buffers at one end only. Features: Pristine DB Cargo livery Running No. 41 70 6723 101-5 Accessory Pack NEM Coupling Pockets Length 192mm - Era 9 - OO Scale

Graham Farish SE&CR 25T 'Dance Hall' Brake Van BR Dept Olive Green 'DS55464'

SE&CR 25T 'Dance Hall' Brake Van BR Departmental Olive Green 'DS55464' Never before available in N scale, this Graham Farish model depicts the South Eastern and Chatham Railway’s (SE&CR) 25 Ton Goods Brake which became known as the ‘Dance Halls’ owing to the spacious cabin provided for the Guard. Designed and built by the SE&CR, the Southern Railway (SR) built further examples after Grouping before designing their own version – the 25 Ton ‘Pill Box’ Brake Van (models of which are also produced by Graham Farish) – which afforded a Guard much less covered accommodation. Whilst the final example was built during the 1920s, the Dance Halls were long lived with some surviving through to the late-twentieth century having been granted a second life in departmental use. The model carries a wealth of detail, from the finely moulded planking of the body sides and ends, to the underframe which features brake and spring detail on the underside. The glazed cabin affords views inside, and through the whole length of the model, which is adorned with numerous separately fitted parts, like the metal handrails and the distinctive foot boards which stretch the length of the vehicle. Features: Pristine BR Departmental Olive Green livery Running No. DS55464 Accessory Pack NEM Coupling Pockets Length 55mm - Era 6 - N Scale

Graham Farish SE&CR 25T 'Dance Hall' Brake Van BR Dept Olive Green 'DS55466'

SE&CR 25T 'Dance Hall' Brake Van BR Departmental Olive Green 'DS55466' Never before available in N scale, this Graham Farish model depicts the South Eastern and Chatham Railway’s (SE&CR) 25 Ton Goods Brake which became known as the ‘Dance Halls’ owing to the spacious cabin provided for the Guard. Designed and built by the SE&CR, the Southern Railway (SR) built further examples after Grouping before designing their own version – the 25 Ton ‘Pill Box’ Brake Van (models of which are also produced by Graham Farish) – which afforded a Guard much less covered accommodation. Whilst the final example was built during the 1920s, the Dance Halls were long lived with some surviving through to the late-twentieth century having been granted a second life in departmental use. The model carries a wealth of detail, from the finely moulded planking of the body sides and ends, to the underframe which features brake and spring detail on the underside. The glazed cabin affords views inside, and through the whole length of the model, which is adorned with numerous separately fitted parts, like the metal handrails and the distinctive foot boards which stretch the length of the vehicle. Features: Pristine BR Departmental Olive Green livery Running No. DS55466 Accessory Pack NEM Coupling Pockets Length 55mm - Era 6 - N Scale

Graham Farish SE&CR 25T 'Dance Hall' Brake Van BR Grey 'S55457'

SE&CR 25T 'Dance Hall' Brake Van BR Grey 'S55457' Never before available in N scale, this Graham Farish model depicts the South Eastern and Chatham Railway’s (SE&CR) 25 Ton Goods Brake which became known as the ‘Dance Halls’ owing to the spacious cabin provided for the Guard. Designed and built by the SE&CR, the Southern Railway (SR) built further examples after Grouping before designing their own version – the 25 Ton ‘Pill Box’ Brake Van (models of which are also produced by Graham Farish) – which afforded a Guard much less covered accommodation. Whilst the final example was built during the 1920s, the Dance Halls were long lived with some surviving through to the late-twentieth century having been granted a second life in departmental use. The model carries a wealth of detail, from the finely moulded planking of the body sides and ends, to the underframe which features brake and spring detail on the underside. The glazed cabin affords views inside, and through the whole length of the model, which is adorned with numerous separately fitted parts, like the metal handrails and the distinctive foot boards which stretch the length of the vehicle. Features: Pristine BR Grey livery Running No. S55457 Accessory Pack NEM Coupling Pockets Length 55mm - Era 4 - N Scale

Graham Farish SE&CR 25T 'Dance Hall' Brake Van SE&CR Grey '11905'

SE&CR 25T 'Dance Hall' Brake Van SE&CR Grey '11905' Never before available in N scale, this Graham Farish model depicts the South Eastern and Chatham Railway’s (SE&CR) 25 Ton Goods Brake which became known as the ‘Dance Halls’ owing to the spacious cabin provided for the Guard. Designed and built by the SE&CR, the Southern Railway (SR) built further examples after Grouping before designing their own version – the 25 Ton ‘Pill Box’ Brake Van (models of which are also produced by Graham Farish) – which afforded a Guard much less covered accommodation. Whilst the final example was built during the 1920s, the Dance Halls were long lived with some surviving through to the late-twentieth century having been granted a second life in departmental use. The model carries a wealth of detail, from the finely moulded planking of the body sides and ends, to the underframe which features brake and spring detail on the underside. The glazed cabin affords views inside, and through the whole length of the model, which is adorned with numerous separately fitted parts, like the metal handrails and the distinctive foot boards which stretch the length of the vehicle. Features: Pristine SE&CR Grey livery Running No. 11905 Accessory Pack NEM Coupling Pockets Length 55mm - Era 2 - N Scale

Graham Farish SE&CR 25T 'Dance Hall' Brake Van SR Brown '55462'

SE&CR 25T 'Dance Hall' Brake Van SR Brown '55462' Never before available in N scale, this Graham Farish model depicts the South Eastern and Chatham Railway’s (SE&CR) 25 Ton Goods Brake which became known as the ‘Dance Halls’ owing to the spacious cabin provided for the Guard. Designed and built by the SE&CR, the Southern Railway (SR) built further examples after Grouping before designing their own version – the 25 Ton ‘Pill Box’ Brake Van (models of which are also produced by Graham Farish) – which afforded a Guard much less covered accommodation. Whilst the final example was built during the 1920s, the Dance Halls were long lived with some surviving through to the late-twentieth century having been granted a second life in departmental use. The model carries a wealth of detail, from the finely moulded planking of the body sides and ends, to the underframe which features brake and spring detail on the underside. The glazed cabin affords views inside, and through the whole length of the model, which is adorned with numerous separately fitted parts, like the metal handrails and the distinctive foot boards which stretch the length of the vehicle. Features: Pristine SR Brown livery Running No. 55462 Accessory Pack NEM Coupling Pockets Length 55mm - Era 3 - N Scale

Bachmann Class 31/4 Refurbished 31407 - Mainline Freight

Class 31/4 Refurbished 31407 - Mainline Freight The Brush Type Twos – Class 30s and Class 31s – are the next Diesel Locomotives to get the Bachmann Branchline treatment, with models of these long-lived prototypes joining the Branchline OO scale range for the first time. Following in the footsteps of their N scale counterparts from Graham Farish, these new OO scale models have all the hallmarks of the Branchline Class 37 & 47 locomotives and more. With high fidelity mouldings, numerous separately fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives, our new Class 30/31 is brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos. Along with an unprecedented array of lighting features, our Dual Fitted speaker system is fitted to all models – bringing to life our SOUND FITTED models. For the ultimate experience, choose one of our SOUND FITTED DELUXE models with their motorised radiator fan, authentic tinted windscreen glazing and, for the first time ever, DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine Mainline Freight Blue livery Running No. 31407 Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all outer wheels on each bogie Designed to operate on curves of second radius (438mm) or greater Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or win red tail lights (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) Detail Variations Specific To This Model: Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips NRN Radio Pods Roof Fan Grille with ‘Top Hat’ Electric Train Heating (ETH) Fitted High Intensity Headlights - Era 8 - OO Scale

Bachmann BR Mk1 TSO Tourist Second Open BR InterCity (Exec) [PF] '4930'

BR Mk1 TSO Tourist Second Open BR InterCity (Executive) [Passenger Fitted] '4930' The Bachmann Branchline Mk1 Coaches have long been the model of choice for the discerning enthusiast wishing to add the iconic Mk1 Coach to their collection and today, these models continue to provide OO scale modellers with the finest models, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard tension lock coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR InterCity (Executive) livery Running No. 4930 Passenger Fitted Commonwealth Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm - Era 8 - OO Scale

Bachmann BR Mk1 TSO Tourist Second Open BR InterCity (Executive) '4930'

BR Mk1 TSO Tourist Second Open BR InterCity (Executive) '4930' The Bachmann Branchline Mk1 Coaches have long been the model of choice for the discerning enthusiast wishing to add the iconic Mk1 Coach to their collection and today, these models continue to provide OO scale modellers with the finest models, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard tension lock coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR InterCity (Executive) livery Running No. 4930 Commonwealth Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm - Era 8 - OO Scale

Bachmann BR Mk1 TSO Tourist Second Open BR Maroon [PF] 'E4283'

BR Mk1 TSO Tourist Second Open BR Maroon [Passenger Fitted] 'E4283' The Bachmann Branchline Mk1 Coaches have long been the model of choice for the discerning enthusiast wishing to add the iconic Mk1 Coach to their collection and today, these models continue to provide OO scale modellers with the finest models, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard tension lock coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR Maroon livery Running No. E4283 Passenger Fitted BR1 Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm - Era 5 - OO Scale

Bachmann BR Mk1 TSO Tourist Second Open BR Maroon [PF] SC4257

BR Mk1 TSO Tourist Second Open BR Maroon [Passenger Fitted] 'SC4257' The Bachmann Branchline Mk1 Coaches have long been the model of choice for the discerning enthusiast wishing to add the iconic Mk1 Coach to their collection and today, these models continue to provide OO scale modellers with the finest models, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard tension lock coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR Maroon livery Running No. SC4257 Passenger Fitted BR1 Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm - Era 5 - OO Scale

Bachmann BR Mk1 BSK Brake Second Corridor BR InterCity (Exec) 'M35451'

BR Mk1 BSK Brake Second Corridor BR InterCity (Executive) 'M35451' The Bachmann Branchline Mk1 Coaches have long been the model of choice for the discerning enthusiast wishing to add the iconic Mk1 Coach to their collection and today, these models continue to provide OO scale modellers with the finest models, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard tension lock coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR InterCity (Executive) livery Running No. M35451 Commonwealth Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm - Era 8 - OO Scale  

Bachmann BR Mk1 BSK Brake Second Corridor BR InterCity (Exec) [PF] M35451

BR Mk1 BSK Brake Second Corridor BR InterCity (Executive) [Passenger Fitted] 'M35451' The Bachmann Branchline Mk1 Coaches have long been the model of choice for the discerning enthusiast wishing to add the iconic Mk1 Coach to their collection and today, these models continue to provide OO scale modellers with the finest models, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard tension lock coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR InterCity (Executive) livery Running No. M35451 Passenger Fitted Commonwealth Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm - Era 8 - OO Scale

Bachmann Class 31/1 Refurbished 31149 BR Railfreight (RS) - Sound Fitted

Class 31/1 Refurbished 31149 BR Railfreight (Red Stripe) - DCC Sound Fitted The Brush Type Twos – Class 30s and Class 31s – are the next Diesel Locomotives to get the Bachmann Branchline treatment, with models of these long-lived prototypes joining the Branchline OO scale range for the first time. Following in the footsteps of their N scale counterparts from Graham Farish, these new OO scale models have all the hallmarks of the Branchline Class 37 & 47 locomotives and more. With high fidelity mouldings, numerous separately fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives, our new Class 30/31 is brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos. Along with an unprecedented array of lighting features, our Dual Fitted speaker system is fitted to all models – bringing to life our SOUND FITTED models. For the ultimate experience, choose one of our SOUND FITTED DELUXE models with their motorised radiator fan, authentic tinted windscreen glazing and, for the first time ever, DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine BR Railfreight (Red Stripe) livery Running No. 31149 Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all outer wheels on each bogie Designed to operate on curves of second radius (438mm) or greater Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or win red tail lights (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) Detail Variations Specific To This Model: Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips - Era 8 - OO Scale

Bachmann Class 31/1 Refurbished 31180 BR Railfreight (RS) - Sound Fitted

Class 31/1 Refurbished 31180 BR Railfreight (Red Stripe) - DCC Sound Fitted The Brush Type Twos – Class 30s and Class 31s – are the next Diesel Locomotives to get the Bachmann Branchline treatment, with models of these long-lived prototypes joining the Branchline OO scale range for the first time. Following in the footsteps of their N scale counterparts from Graham Farish, these new OO scale models have all the hallmarks of the Branchline Class 37 & 47 locomotives and more. With high fidelity mouldings, numerous separately fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives, our new Class 30/31 is brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos. Along with an unprecedented array of lighting features, our Dual Fitted speaker system is fitted to all models – bringing to life our SOUND FITTED models. For the ultimate experience, choose one of our SOUND FITTED DELUXE models with their motorised radiator fan, authentic tinted windscreen glazing and, for the first time ever, DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine BR Railfreight (Red Stripe) livery Running No. 31180 Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all outer wheels on each bogie Designed to operate on curves of second radius (438mm) or greater Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or win red tail lights (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) Detail Variations Specific To This Model: Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips - Era 8 - OO Scale

Bachmann Class 31/1 Refurbished 31304 BR Railfreight (PS) - Sound Fitted

Class 31/1 Refurbished 31304 BR Railfreight Petroleum Sector - DCC Sound Fitted The Brush Type Twos – Class 30s and Class 31s – are the next Diesel Locomotives to get the Bachmann Branchline treatment, with models of these long-lived prototypes joining the Branchline OO scale range for the first time. Following in the footsteps of their N scale counterparts from Graham Farish, these new OO scale models have all the hallmarks of the Branchline Class 37 & 47 locomotives and more. With high fidelity mouldings, numerous separately fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives, our new Class 30/31 is brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos. Along with an unprecedented array of lighting features, our Dual Fitted speaker system is fitted to all models – bringing to life our SOUND FITTED models. For the ultimate experience, choose one of our SOUND FITTED DELUXE models with their motorised radiator fan, authentic tinted windscreen glazing and, for the first time ever, DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine BR Railfreight Petroleum Sector livery Running No. 31304 Etched Depot Plaque and BR Double Arrow Included Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all outer wheels on each bogie Designed to operate on curves of second radius (438mm) or greater Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or win red tail lights (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) Detail Variations Specific To This Model: Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Modified Main Fan Grilles with Vertical Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips NRN Radio Pods Roof Fan Grille with ‘Top Hat’ High Intensity Headlights - Era 8 - OO Scale

Bachmann Class 31/1 Refurbished 31319 BR Railfreight (PS) - Sound Fitted

Class 31/1 Refurbished 31319 BR Railfreight Petroleum Sector - DCC Sound Fitted The Brush Type Twos – Class 30s and Class 31s – are the next Diesel Locomotives to get the Bachmann Branchline treatment, with models of these long-lived prototypes joining the Branchline OO scale range for the first time. Following in the footsteps of their N scale counterparts from Graham Farish, these new OO scale models have all the hallmarks of the Branchline Class 37 & 47 locomotives and more. With high fidelity mouldings, numerous separately fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives, our new Class 30/31 is brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos. Along with an unprecedented array of lighting features, our Dual Fitted speaker system is fitted to all models – bringing to life our SOUND FITTED models. For the ultimate experience, choose one of our SOUND FITTED DELUXE models with their motorised radiator fan, authentic tinted windscreen glazing and, for the first time ever, DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine BR Railfreight Petroleum Sector livery Running No. 31319 Etched Depot Plaque and BR Double Arrow Included Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all outer wheels on each bogie Designed to operate on curves of second radius (438mm) or greater Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or win red tail lights (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) Detail Variations Specific To This Model: Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Modified Main Fan Grilles with Vertical Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips NRN Radio Pods Roof Fan Grille with ‘Top Hat’ High Intensity Headlights - Era 8 - OO Scale

Bachmann Class 31/4 Refurbished 31407 Mainline Freight - Sound Fitted

Class 31/4 Refurbished 31407 Mainline Freight - DCC Sound Fitted The Brush Type Twos – Class 30s and Class 31s – are the next Diesel Locomotives to get the Bachmann Branchline treatment, with models of these long-lived prototypes joining the Branchline OO scale range for the first time. Following in the footsteps of their N scale counterparts from Graham Farish, these new OO scale models have all the hallmarks of the Branchline Class 37 & 47 locomotives and more. With high fidelity mouldings, numerous separately fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives, our new Class 30/31 is brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos. Along with an unprecedented array of lighting features, our Dual Fitted speaker system is fitted to all models – bringing to life our SOUND FITTED models. For the ultimate experience, choose one of our SOUND FITTED DELUXE models with their motorised radiator fan, authentic tinted windscreen glazing and, for the first time ever, DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine Mainline Freight Blue livery Running No. 31407 Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all outer wheels on each bogie Designed to operate on curves of second radius (438mm) or greater Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or win red tail lights (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) Detail Variations Specific To This Model: Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips NRN Radio Pods Roof Fan Grille with ‘Top Hat’ Electric Train Heating (ETH) Fitted High Intensity Headlights - Era 8 - OO Scale

Bachmann Class 31/4 Refurbished 31407 Mainline Freight Deluxe SoundFitted

Class 31/4 Refurbished 31407 Mainline Freight - Deluxe Sound Fitted The Brush Type Twos – Class 30s and Class 31s – are the next Diesel Locomotives to get the Bachmann Branchline treatment, with models of these long-lived prototypes joining the Branchline OO scale range for the first time. Following in the footsteps of their N scale counterparts from Graham Farish, these new OO scale models have all the hallmarks of the Branchline Class 37 & 47 locomotives and more. With high fidelity mouldings, numerous separately fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives, our new Class 30/31 is brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos. Along with an unprecedented array of lighting features, our Dual Fitted speaker system is fitted to all models – bringing to life our SOUND FITTED models. For the ultimate experience, choose one of our SOUND FITTED DELUXE models with their motorised radiator fan, authentic tinted windscreen glazing and, for the first time ever, DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine Mainline Freight Blue livery Running No. 31407 Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all outer wheels on each bogie Designed to operate on curves of second radius (438mm) or greater Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or win red tail lights (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) Detail Variations Specific To This Model: Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips NRN Radio Pods Roof Fan Grille with ‘Top Hat’ Electric Train Heating (ETH) Fitted High Intensity Headlights - Era 8 - OO Scale

Bachmann Class 31/4 Refurbished 31435 BR Blue - Sound Fitted

Class 31/4 Refurbished 31435 BR Blue - DCC Sound Fitted The Brush Type Twos – Class 30s and Class 31s – are the next Diesel Locomotives to get the Bachmann Branchline treatment, with models of these long-lived prototypes joining the Branchline OO scale range for the first time. Following in the footsteps of their N scale counterparts from Graham Farish, these new OO scale models have all the hallmarks of the Branchline Class 37 & 47 locomotives and more. With high fidelity mouldings, numerous separately fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives, our new Class 30/31 is brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos. Along with an unprecedented array of lighting features, our Dual Fitted speaker system is fitted to all models – bringing to life our SOUND FITTED models. For the ultimate experience, choose one of our SOUND FITTED DELUXE models with their motorised radiator fan, authentic tinted windscreen glazing and, for the first time ever, DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine BR Blue livery Running No. 31435 Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all outer wheels on each bogie Designed to operate on curves of second radius (438mm) or greater Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or win red tail lights (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) Detail Variations Specific To This Model: Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips Electric Train Heating (ETH) - Era 8 - OO Scale  

Oxford Diecast Austin Mini Metro Emberglow (Princess Diana) (1:76)

Austin Mini Metro Emberglow (Princess Diana) Includes: - Diecast model - Driven by Princess Diana  - Body lining - Interior and body detailing - Display stand - OO Scale Vehicle information: British Leyland introduced the Mini Metro in 1980, with a view to it being a possible successor to the popular and highly acclaimed Mini.  Known initially as the Austin Mini Metro, as time went on with vehicle manufacturer mergers and takeovers, it became popularly known as simply the Metro.  Designed by David Bache and Harris Mann, the Metro was assembled at the Longbridge plant and came as a 3-door/5door hatchback with front wheel drive, a four speed gearbox and engine options from 1.0L  to 1.3L.Top speed was 84 mph.for the basic model. With a length of 3,400 mm and a width of 2,250 mm and boasting a spacious interior, it was particularly popular for use in the city too.  The price was pretty attractive as well. You could buy a new Austin Mini Metro  basic 1.0L model for £3,095. The Metro was revealed over a 3-week period in September 1980 but not at the British Motor Show, where it made its official public debut later.  British Leyland chose to sail from Liverpool to The Isle of Man aboard a cruise ship which proved highly newsworthy and attracted huge attention from prospective buyers from the car trade, who took advantage of this unique opportunity to view and buy the acclaimed vehicle. The Austin Mini Metro was popularised to a notable extent by one famous purchaser of the early version.  The 19 year old Lady Diana Spencer bought one at the time when she was attracting a great deal of attention prior to her marriage to the then Prince Charles.  Registered MPB 909W from 1980/81, it is Lady Diana’s Metro that Oxford has chosen to launch this new model. Decorated in the ruby red Emberlow colour scheme, Our Austin Mini Metro is based on the 3-door version.  The exterior features a fine double white stripe along the waist of the car, with a similar black stripe below.  The majority of the exterior trim is black including the distinctive radiator grille. which also has the squared off headlights embedded into it with the Austin blue badge in the centre.  To the rear the Austin mini Metro signage is printed in silver along the lower edge of the boot. The Austin Mini Metro was the best selling mini-car in its early production days and was voted Car of the Year in 1983.   During its 18-year production span, the Metro clocked up over 2 million sales. However, it is a very rare sight today.

Graham Farish Class 158 2-Car DMU 158729, ScotRail Saltire

The Class 158 is one of British Rail’s most successful second generation Diesel Multiple Units (DMUs); first introduced in 1989, all but one of the original units remain in traffic to this day. This all-new Graham Farish model follows in the footsteps of the brand’s award winning Class 319 Electric Multiple Unit and captures this iconic prototype to a tee. The pinnacle of N scale second generation DMUs, the Graham Farish Class 158 combines high fidelity bodyshells with an underframe that’s adorned with separate components depicting the engines, electrical equipment, and auxiliary gear. It’s the livery application which really brings these models to life and every element has been replicated in miniature. Whilst the main colours are spray painted, the myriad smaller logos, symbols and lettering are applied using a specialist printing process, using BR and corporate specification fonts, logos and colours. Driven by the low-level drive mechanism, each vehicle sports uninterrupted views of the interior which is fitted out with tables, chairs and even metal luggage racks – made visible thanks to the saloon lighting. The inter-vehicle coupling system ensure that the two vehicles work together in harmony and enables the use of a single decoder for DCC operation. Fitting that decoder couldn’t be easier thanks to the clip-off underframe panel behind which the decoder socket is fitted and combined with the pre-fitted speaker, it’s easy to fit sound to your model Features: Pristine ScotRail Saltire livery Running No. 158729 Two-Car Unit comprising car Nos. 52729 & 57729 Destination blinds for Dundee Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B Length 315mm Coreless, twin shaft motor with two flywheels providing drive to both bogies of the DMS (A) vehicle Four axle drive (all axles on the DMS (A) vehicle) Electrical pickup from all wheels Highly detailed bodyshell with flush, tinted glazing Unobstructed interior including seat and table detail Bogies constructed from multiple components featuring full relief detail Separately applied underframe equipment and detail components Separately applied metal detail parts, including exhaust guards and interior luggage racks Each model is supplied with an accessory pack comprising exhaust pipes and cab end connector door covers (where appropriate) Directional lighting, including illuminated destination panels, switchable on/off at either end on DCC or Analogue control Cab and saloon interior lighting, switchable on/off via the under-chassis switches Authentic light colours and temperatures selected for each model based on era and application Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Detail Variations Specific To This Model: Radio Pod on Roof Revised Air Conditioning (Type B) Toilet Discharge via CET Tank Cummins Engine Revised Heather Scottish Air Dam Sanding Gear Fitted Revised LED Light Cluster Plated Gangway Doors - Era 9 - N Scale

Graham Farish Class 158 2-Car DMU 158816 BR Regional Railways DCC S/F

The Class 158 is one of British Rail’s most successful second generation Diesel Multiple Units (DMUs); first introduced in 1989, all but one of the original units remain in traffic to this day. This all-new Graham Farish model follows in the footsteps of the brand’s award winning Class 319 Electric Multiple Unit and captures this iconic prototype to a tee. The pinnacle of N scale second generation DMUs, the Graham Farish Class 158 combines high fidelity bodyshells with an underframe that’s adorned with separate components depicting the engines, electrical equipment, and auxiliary gear. It’s the livery application which really brings these models to life and every element has been replicated in miniature. Whilst the main colours are spray painted, the myriad smaller logos, symbols and lettering are applied using a specialist printing process, using BR and corporate specification fonts, logos and colours. Driven by the low-level drive mechanism, each vehicle sports uninterrupted views of the interior which is fitted out with tables, chairs and even metal luggage racks – made visible thanks to the saloon lighting. The inter-vehicle coupling system ensure that the two vehicles work together in harmony and enables the use of a single decoder for DCC operation. Fitting that decoder couldn’t be easier thanks to the clip-off underframe panel behind which the decoder socket is fitted and combined with the pre-fitted speaker, it’s easy to fit sound to your model Features: Pristine BR Regional Railways livery Running No. 158816 Two-Car Unit comprising car Nos. 52816 & 57816 Destination blinds for Milford Haven Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B Length 315mm Coreless, twin shaft motor with two flywheels providing drive to both bogies of the DMS (A) vehicle Four axle drive (all axles on the DMS (A) vehicle) Electrical pickup from all wheels Highly detailed bodyshell with flush, tinted glazing Unobstructed interior including seat and table detail Bogies constructed from multiple components featuring full relief detail Separately applied underframe equipment and detail components Separately applied metal detail parts, including exhaust guards and interior luggage racks Each model is supplied with an accessory pack comprising exhaust pipes and cab end connector door covers (where appropriate) Directional lighting, including illuminated destination panels, switchable on/off at either end on DCC or Analogue control Cab and saloon interior lighting, switchable on/off via the under-chassis switches Authentic light colours and temperatures selected for each model based on era and application Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Detail Variations Specific To This Model: Original Air Conditioning Toilet Discharge via Coupler Box (Car A Only) Perkins Engine Original Heather Standard Air Dam Original Light Cluster Gangway Doors with Small Windows - Era 8 - N Scale

Graham Farish Class 158 2-Car DMU 158824 Arriva Trains Wales (Revised)

The Class 158 is one of British Rail’s most successful second generation Diesel Multiple Units (DMUs); first introduced in 1989, all but one of the original units remain in traffic to this day. This all-new Graham Farish model follows in the footsteps of the brand’s award winning Class 319 Electric Multiple Unit and captures this iconic prototype to a tee. The pinnacle of N scale second generation DMUs, the Graham Farish Class 158 combines high fidelity bodyshells with an underframe that’s adorned with separate components depicting the engines, electrical equipment, and auxiliary gear. It’s the livery application which really brings these models to life and every element has been replicated in miniature. Whilst the main colours are spray painted, the myriad smaller logos, symbols and lettering are applied using a specialist printing process, using BR and corporate specification fonts, logos and colours. Driven by the low-level drive mechanism, each vehicle sports uninterrupted views of the interior which is fitted out with tables, chairs and even metal luggage racks – made visible thanks to the saloon lighting. The inter-vehicle coupling system ensure that the two vehicles work together in harmony and enables the use of a single decoder for DCC operation. Fitting that decoder couldn’t be easier thanks to the clip-off underframe panel behind which the decoder socket is fitted and combined with the pre-fitted speaker, it’s easy to fit sound to your model Features: Pristine Arriva Trains Wales (Revised) livery Running No. 158824 Two-Car Unit comprising car Nos. 52824 & 57824 Destination blinds for Aberystwyth Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B Length 315mm Coreless, twin shaft motor with two flywheels providing drive to both bogies of the DMS (A) vehicle Four axle drive (all axles on the DMS (A) vehicle) Electrical pickup from all wheels Highly detailed bodyshell with flush, tinted glazing Unobstructed interior including seat and table detail Bogies constructed from multiple components featuring full relief detail Separately applied underframe equipment and detail components Separately applied metal detail parts, including exhaust guards and interior luggage racks Each model is supplied with an accessory pack comprising exhaust pipes and cab end connector door covers (where appropriate) Directional lighting, including illuminated destination panels, switchable on/off at either end on DCC or Analogue control Cab and saloon interior lighting, switchable on/off via the under-chassis switches Authentic light colours and temperatures selected for each model based on era and application Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Detail Variations Specific To This Model: Radio Pod on Roof Revised Air Conditioning (Type A) Toilet Discharge via CET Tank Cummins Engine Revised Heather Scottish Air Dam Sanding Gear Fitted Revised LED Light Cluster Plated Gangway Doors - Era 9 - N Scale

Graham Farish BR Mk1 RMB Restaurant Miniature Buffet BR Maroon SC1829

BR Mk1 RMB Restaurant Miniature Buffet BR Maroon SC1829 Features: Pristine BR Maroon livery Running No. SC829 Commonwealth Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 136mm - Era 5 - N Scale

Graham Farish BR Mk1 BG Brake Gangwayed BR Maroon E81497

BR Mk1 BG Brake Gangwayed BR Maroon E81497 Features: Pristine BR Maroon livery Running No. E81497 BR1 Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 122mm - Era 5 - N Scale

Graham Farish BR Mk1 BSK Brake Second Corridor 'Laboratory 11' BR RTC (Revised

BR Mk1 BSK Brake Second Corridor 'Laboratory 11' BR RTC (Revised) Features: Pristine BR RTC (Revised) livery Running No. RDB975046 / Laboratory 11 B4 Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 136mm - Era 8 - N Scale

Graham Farish Class 14 D2/9531 NCB British Oak Orange & Black Sound Fitted

Class 14 D2/9531 NCB British Oak Orange & Black - Sound Fitted Features: Locomotive is now Preserved Pristine NCB British Oak Orange & Black livery Running No. D2/9531 Accessory Pack NEM Coupling Pockets Powerful Coreless Motor Speaker Fitted SOUND FITTED - Fitted with a Zimo MS590N18 Sound Decoder Length 72mm - Era 6 - N Scale Affectionately known as the ‘Tedy Bears’, these N scale models cram all of the charm and character of their full size counterparts into a small package and now, for the first time, feature a Next18 DCC decoder socket making it easy to fit a decoder and enjoy these models on DCC. The highly detailed bodyshell is adorned with separately fitted handrails, lamps and other small parts, whilst the prominent footsteps hang from the running plate on both sides. The wasp stripes at either end, expertly applied using specialist printing techniques, make this model unmissable and below them, the bufferbeam can be configured with standard N scale couplings, or with a full depth bufferbeam and a full complement of pipework if standard couplings are not required.  

Airfix Fairey Gannet AS1AS4 (1:48)

Fairey Gannet AS1AS4 Includes: - Highly detailed plastic kit - Extensive cockpit and interior detail - Pilots included - Distinctive prop/ blades - Body panelling and rivet detail - Optional undercarriage (Up or down positions) - Waterslide transfers/decals - Kit requires glue and paint to complete NOT included - 1:48 Scale  Aircraft information and history: An aircraft that must surely be considered one of the most distinctive types to have ever seen Fleet Air Arm service, the Fairey Gannet was as capable as it was unique and was significant as the only post-war military contract to be won by the famous Fairey Aviation Company. Arguably the most unconventional Fairey designed aircraft to enter full production, the Gannet was developed in response to a 1945 Royal Navy requirement for an advanced carrier-based, turboprop-powered anti-submarine hunter-killer, one which was rugged enough to withstand the rigors of operation at sea.  Intended to counter the recent expansion of the Soviet submarine fleet at the start of the Cold War era, the Gannet was equipped with all manner of the latest electronic detection equipment and if an enemy submarine was detected, it could be marked, tracked, and if necessary, attacked, using bombs, depth charges, rockets, and air-launched acoustic torpedoes. One feature of the Gannet which helped to give it a unique appearance was the adoption of its powerplant, the innovative Armstrong Siddeley Double Mamba. This arrangement saw two gas turbine engines mounted side by side in the nose of the gannet, sharing a common gearbox, but both operating independently, each engine driving its own coaxially mounted, contra-rotating propeller. In addition to this, the engines could run on kerosene and even diesel fuel, which was safer to handle and less refined than traditional aviation fuels.  This arrangement provided Gannet crews with more than enough power for carrier operations, with the reassurance of two engines when embarking on long ocean patrols. Once in flight, the pilot could shut down one of the engines to conserve fuel and whilst this would reduce the Gannet's maximum speed, it would extend its loiter capabilities. Usually, a pilot would alternate engine use during a long patrol, running each engine for around an hour before swapping to the other engine - the engine mounted on the port side drove the front propeller. Another unique feature of the Gannet's design was its bi-folding wing system, something which was designed to allow this large aircraft to operate safely and to be stored aboard one of the Royal Navy's relatively small aircraft carriers. When a pilot engaged the wing unfold, this ingenious system not only prepared the wings for flight, but also automatically connected all flight control systems, hydraulic connections and fuel pipes to the main system, without any ground crew intervention.  In operation, there are reports that the Gannet was so rugged a design that when one aircraft lost the outer sections of both wings after performing a particularly violent manoeuvre, the aircraft still managed to make it back safely to its home carrier, something which can only have endeared the aircraft to its crews still further. The Fairey Gannet would prove to be an extremely rugged and highly effective anti-submarine aircraft, one which could carry an impressive array of offensive ordnance and one which was able to attack submarines either on the surface, or when submerged and trying to evade its attentions. Well-liked by air and ground crews alike, 348 Gannets would eventually be produced and in addition to serving with Britain's Fleet Air Arm, the aircraft would also see service with the navies of Australia, Germany and Indonesia.

Airfix Vickers Wellington Mk IA C (1:72)

Vickers Wellington Mk IA C (1:72) Includes: - Detailed plastic kit - Cockpit detail includes pilots - Engine and prop detail - Optional undercarriage (up or down positions) - Turret detail - Waterslide transfers/ decals for two schemes:   - (A)    - (B)  - Kit requires glue and paint to complete NOT included - 1:72 Scale Aircraft information and history: The most capable medium bomber of the day was the twin-engine Vickers Wellington, which first flew in 1936 and entered RAF service with No.99 Squadron at Mildenhall in October 1938. The production aircraft bore little resemblance to the prototype aircraft and compared to contemporary medium bombers already in service, the Wellington appeared to be much more advanced in design and an aircraft feared by any potential enemy. Its sleek monoplane design and heavy defensive armament placed the new Wellington as one the advanced and capable medium bombers in the world. Perhaps the most significant feature of the Wellingtons design was the adoption of a geodetic construction method, which was developed by famous British engineer and inventor Barnes Wallis. Duralumin W-beams were used to form a metal lattice-work construction on to which wooden battens would be screwed, which would then allow the doped fabric outer skin of the aircraft to be attached.  The resultant fuselage was relatively light in weight but possessed great strength and whilst the method o construction posed challenged for companies engaged in manufacturing Wellington bombers, the inherent strength proved crucial when the aircraft was thrust into combat.  Capable of withstanding significant battle damage, numerous RAF Wellingtons managed to bring their crews back home, when the other bombers would have failed to do so.

Graham Farish BR OBA Open Wagon Low Ends EWS (Unbranded)

BR OBA Open Wagon Low Ends EWS (Unbranded) Designed as a replacement for the Tube Wagons – many of which BR had inherited at Nationalisation or built themselves during the early-BR period – the OBA Open Wagon was designed to transport general merchandise. Large side doors aided loading and various tethering points were integrated into the floors of these air-braked wagons. The Graham Farish model is available with Low or High Ends – this particular example depicts a wagon with Low Ends – and features fine mouldings throughout, in particular the door stops, separately fitted brake equipment and handbrake levers, and metal buffer heads. MODEL FEATURES: Pristine EWS (Unbranded) livery Running No. 110125 NEM Coupling Pockets Length 77mm - Era 9 - N Scale - N Scale

Graham Farish BR OBA Open Wagon Low Ends EWS (Unbranded) Running No. 110353

BR OBA Open Wagon Low Ends EWS (Unbranded) Running No. 110353 Designed as a replacement for the Tube Wagons – many of which BR had inherited at Nationalisation or built themselves during the early-BR period – the OBA Open Wagon was designed to transport general merchandise. Large side doors aided loading and various tethering points were integrated into the floors of these air-braked wagons. The Graham Farish model is available with Low or High Ends – this particular example depicts a wagon with Low Ends – and features fine mouldings throughout, in particular the door stops, separately fitted brake equipment and handbrake levers, and metal buffer heads. MODEL FEATURES: Pristine EWS (Unbranded) livery Running No. 110353 NEM Coupling Pockets Length 77mm - Era 9 - N Scale  

W.Britain More Ammo Man! Lt John Chard

More Ammo Man! Lt John Chard Includes: - Detailed diecast painted figure - Anglo-Zulu War Collection - Certificate of the figure - Matte Paint finish - 1:30 Scale Historical information: On 22 January 1879, 32-year-old Lieutenant John Rouse Merriott Chard set out for Rorke’s Drift with the news that Zulus had been spotted moving on the British camp at Isandlwana. Chard’s engineer’s eye was crucial. He decided to defend the Drift; it was a wise decision since any attempt to retreat would undoubtedly have exposed the men to a Zulu attack on the open veldt. He directed that a line of barricades be run in front of the post. His soldiers would be sheltered by a wall of mealie bags and biscuit boxes above their own head height. This put the Zulu warriors fighting with close-quarter weapons at a fatal disadvantage. The battle had cost the lives of approximately 600 Zulus, while just 17 British soldiers were killed – a testament to the effectiveness of Chard’s barricades. 

Graham Farish Class 90/0 90017 'Rail Express Systems Quality Assured' RES

Class 90/0 90017 'Rail Express Systems Quality Assured' Rail Express Systems The award winning Class 90 returns to the Graham Farish range twelve months after its grand unveiling. A pinnacle of British N scale Electric Locomotives, this example depicts No. 90017 ‘Rail Express Systems Quality Assured’ in Rail Express Systems livery. Combining a highly accurate and detailed body shell with an authentic chassis and bogies, plus a fine reproduction of the Brecknell Willis high-speed Pantograph – the Graham Farish Class 90 captures the distinctive shape and character of the real locomotives to a tee. Add to this the impressive technical specification which includes a coreless motor with twin flywheels, all wheel drive and all wheel pickup, plus directional lights and, when used on DCC, cab lights too, and it’s easy to see why this model is the complete package. FEATURES: Pristine Rail Express Systems livery Named ‘Rail Express Systems Quality Assured’ Running No. 90017 Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B Length 126mm   DETAIL VARIATIONS SPECIFIC TO THIS MODEL: Original ‘Clipped’ Buffers (Pantograph end) / Round (Non-Pantograph end) Rubbing Plates Buckeye Couplings TDM Cables fitted to the Buffer Sides Small Battery Charger Battery Boxes and Switch with Smooth Sides and Sliding Access - Era 9 - N Scale

Graham Farish Class 90/0 90017 Rail Express Systems Quality Assured' DCC Sound

Class 90/0 90017 Rail Express Systems Quality Assured' DCC Sound Fitted  The award winning Class 90 returns to the Graham Farish range twelve months after its grand unveiling. A pinnacle of British N scale Electric Locomotives, this example depicts No. 90017 ‘Rail Express Systems Quality Assured’ in Rail Express Systems livery and comes complete with SOUND FITTED. Combining a highly accurate and detailed body shell with an authentic chassis and bogies, plus a fine reproduction of the Brecknell Willis high-speed Pantograph – the Graham Farish Class 90 captures the distinctive shape and character of the real locomotives to a tee. Add to this the impressive technical specification which includes a coreless motor with twin flywheels, all wheel drive and all wheel pickup, plus directional lights and, when used on DCC, cab lights too, and it’s easy to see why this model is the complete package. this SOUND FITTED model will take your enjoyment to the next level with its authentic sound effects which only enhance the model’s good looks! FEATURES: Pristine Rail Express Systems livery Named ‘Rail Express Systems Quality Assured’ Running No. 90017 SOUND FITTED - Fitted with a ESU Loksound V5DDC Sound Decoder Length 126mm DETAIL VARIATIONS SPECIFIC TO THIS MODEL: Original ‘Clipped’ Buffers (Pantograph end) / Round (Non-Pantograph end) Rubbing Plates Buckeye Couplings TDM Cables fitted to the Buffer Sides Small Battery Charger Battery Boxes and Switch with Smooth Sides and Sliding Access - Era 9 - N Scale

Graham Farish Class 90/0 90048 Freightliner G&W

Class 90/0 90048 Freightliner G&W The award winning Class 90 returns to the Graham Farish range twelve months after its grand unveiling. A pinnacle of British N scale Electric Locomotives, this example is decorated in the orange, yellow and black scheme of Freightliner Genesee & Wyoming, depicting No. 90048. Combining a highly accurate and detailed body shell with an authentic chassis and bogies, plus a fine reproduction of the Brecknell Willis high-speed Pantograph – the Graham Farish Class 90 captures the distinctive shape and character of the real locomotives to a tee. Add to this the impressive technical specification which includes a coreless motor with twin flywheels, all wheel drive and all wheel pickup, plus directional lights and, when used on DCC, cab lights too, and it’s easy to see why this model is the complete package. FEATURES: Pristine Freightliner G&W livery Running No. 90048 Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B Length 126mm   DETAIL VARIATIONS SPECIFIC TO THIS MODEL: Rectangular Freight Buffers Screw link Couplings TDM Cables fitted to the Buffer Sides Large Battery Charger Battery Boxes and Switch with Hinged Access Panels which are Ribbed - Era 9 - N Scale

Graham Farish Class 90/0 90048 Freightliner G&W - DCC Sound

Class 90/0 90048 Freightliner G&W - DCC Sound Fitted The award winning Class 90 returns to the Graham Farish range twelve months after its grand unveiling. A pinnacle of British N scale Electric Locomotives, this example is decorated in the orange, yellow and black scheme of Freightliner Genesee & Wyoming, depicting No. 90048 and is supplied with SOUND FITTED. Combining a highly accurate and detailed body shell with an authentic chassis and bogies, plus a fine reproduction of the Brecknell Willis high-speed Pantograph – the Graham Farish Class 90 captures the distinctive shape and character of the real locomotives to a tee. Add to this the impressive technical specification which includes a coreless motor with twin flywheels, all wheel drive and all wheel pickup, plus directional lights and, when used on DCC, cab lights too, and it’s easy to see why this model is the complete package this SOUND FITTED model will take your enjoyment to the next level with its authentic sound effects which only enhance the model’s good looks! FEATURES: Pristine Freightliner G&W livery Running No. 90048 SOUND FITTED - Fitted with a ESU Loksound V5DDC Sound Decoder Length 126mm DETAIL VARIATIONS SPECIFIC TO THIS MODEL: Rectangular Freight Buffers Screw link Couplings TDM Cables fitted to the Buffer Sides Large Battery Charger Battery Boxes and Switch with Hinged Access Panels which are Ribbed - Era 9 - N Scale

Graham Farish Class 90/1 90139 BR Railfreight Distribution Sector

Class 90/1 90139 BR Railfreight Distribution Sector The award winning Class 90 returns to the Graham Farish range twelve months after its grand unveiling. A pinnacle of British N scale Electric Locomotives, this model is finished as No. 90139 in BR Railfreight Distribution Sector livery. Combining a highly accurate and detailed body shell with an authentic chassis and bogies, plus a fine reproduction of the Brecknell Willis high-speed Pantograph – the Graham Farish Class 90 captures the distinctive shape and character of the real locomotives to a tee. Add to this the impressive technical specification which includes a coreless motor with twin flywheels, all wheel drive and all wheel pickup, plus directional lights and, when used on DCC, cab lights too, and it’s easy to see why this model is the complete package. FEATURES: Pristine BR Railfreight Distribution Sector livery Running No. 90139 Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B Length 126mm   DETAIL VARIATIONS SPECIFIC TO THIS MODEL: Original ‘Clipped’ Buffers Rubbing Plates Screw Link Couplings TDM Cables fitted to the Buffer Sides Small Battery Charger Battery Boxes and Switch with Hinged Access Panels which are Ribbed - Era 8 - N Scale

Graham Farish Class 90/1 90139 BR Railfreight Distribution Sector DCC Sound

Class 90/1 90139 BR Railfreight Distribution Sector - DCC Sound Fitted The award winning Class 90 returns to the Graham Farish range twelve months after its grand unveiling. A pinnacle of British N scale Electric Locomotives, this model is finished as No. 90139 in BR Railfreight Distribution Sector livery complete with SOUND FITTED. Combining a highly accurate and detailed body shell with an authentic chassis and bogies, plus a fine reproduction of the Brecknell Willis high-speed Pantograph – the Graham Farish Class 90 captures the distinctive shape and character of the real locomotives to a tee. Add to this the impressive technical specification which includes a coreless motor with twin flywheels, all wheel drive and all wheel pickup, plus directional lights and, when used on DCC, cab lights too, and it’s easy to see why this model is the complete package. this SOUND FITTED model will take your enjoyment to the next level with its authentic sound effects which only enhance the model’s good looks! FEATURES: Pristine BR Railfreight Distribution Sector livery Running No. 90139 SOUND FITTED - Fitted with a ESU Loksound V5DDC Sound Decoder Length 126mm DETAIL VARIATIONS SPECIFIC TO THIS MODEL: Original ‘Clipped’ Buffers Rubbing Plates Screw Link Couplings TDM Cables fitted to the Buffer Sides Small Battery Charger Battery Boxes and Switch with Hinged Access Panels which are Ribbed - Era 8 - N Scale

Graham Farish Class 90/0 90002 'Mission: Impossible' Virgin Trains (Original)

Class 90/0 90002 'Mission: Impossible' Virgin Trains (Original) The award winning Class 90 returns to the Graham Farish range twelve months after its grand unveiling. A pinnacle of British N scale Electric Locomotives, this example depicts No. 90002 ‘Mission: Impossible’ in original Virgin Trains livery. Combining a highly accurate and detailed body shell with an authentic chassis and bogies, plus a fine reproduction of the Brecknell Willis high-speed Pantograph – the Graham Farish Class 90 captures the distinctive shape and character of the real locomotives to a tee. Add to this the impressive technical specification which includes a coreless motor with twin flywheels, all wheel drive and all wheel pickup, plus directional lights and, when used on DCC, cab lights too, and it’s easy to see why this model is the complete package.  FEATURES: Pristine Virgin Trains (Original) livery Named ‘Mission: Impossible’ Running No. 90002 Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B Length 126mm   DETAIL VARIATIONS SPECIFIC TO THIS MODEL: Original ‘Clipped’ Buffers Rubbing Plates Buckeye Couplings TDM Cables fitted to the Buffer Sides Large Battery Charger Battery Boxes and Switch with Smooth Sides and Sliding Access - Era 9 - N Scale

Graham Farish Class 90/0 90002 'Mission: Impossible' Virgin Trains DCC Sound

Class 90/0 90002 'Mission: Impossible' Virgin Trains (Original) - DCC Sound Fitted  The award winning Class 90 returns to the Graham Farish range twelve months after its grand unveiling. A pinnacle of British N scale Electric Locomotives, this example depicts No. 90002 ‘Mission: Impossible’ in original Virgin Trains livery complete with SOUND FITTED. Combining a highly accurate and detailed body shell with an authentic chassis and bogies, plus a fine reproduction of the Brecknell Willis high-speed Pantograph – the Graham Farish Class 90 captures the distinctive shape and character of the real locomotives to a tee. Add to this the impressive technical specification which includes a coreless motor with twin flywheels, all wheel drive and all wheel pickup, plus directional lights and, when used on DCC, cab lights too, and it’s easy to see why this model is the complete package this SOUND FITTED model will take your enjoyment to the next level with its authentic sound effects which only enhance the model’s good looks! FEATURES: Pristine Virgin Trains (Original) livery Named ‘Mission: Impossible’ Running No. 90002 SOUND FITTED - Fitted with a ESU Loksound V5DDC Sound Decoder Length 126mm DETAIL VARIATIONS SPECIFIC TO THIS MODEL: Original ‘Clipped’ Buffers Rubbing Plates Buckeye Couplings TDM Cables fitted to the Buffer Sides Large Battery Charger Battery Boxes and Switch with Smooth Sides and Sliding Access - Era 9 - N Scale

Graham Farish Class 90/0 90006 'High Sheriff' BR InterCity (Swallow) DCC Sound

Class 90/0 90006 'High Sheriff' BR InterCity (Swallow) - DCC Sound Fitted The award winning Class 90 returns to the Graham Farish range twelve months after its grand unveiling. A pinnacle of British N scale Electric Locomotives, this model is finished as No. 90006 ‘High Sheriff’ in BR InterCity Swallow livery complete with SOUND FITTED. Combining a highly accurate and detailed body shell with an authentic chassis and bogies, plus a fine reproduction of the Brecknell Willis high-speed Pantograph – the Graham Farish Class 90 captures the distinctive shape and character of the real locomotives to a tee. Add to this the impressive technical specification which includes a coreless motor with twin flywheels, all wheel drive and all wheel pickup, plus directional lights and, when used on DCC, cab lights too, and it’s easy to see why this model is the complete package. this SOUND FITTED model will take your enjoyment to the next level with its authentic sound effects which only enhance the model’s good looks! FEATURES: Pristine BR InterCity (Swallow) livery Named ‘High Sheriff’ Running No. 90006 SOUND FITTED - Fitted with a ESU Loksound V5DDC Sound Decoder Length 126mm DETAIL VARIATIONS SPECIFIC TO THIS MODEL: Original ‘Clipped’ Buffers Rubbing Plates Buckeye Couplings TDM Cables fitted to the Buffer Sides Large Battery Charger Battery Boxes and Switch with Smooth Sides and Sliding Access - Era 8 - N Scale

Bachmann Class 37/0 Centre Headcode 37371 BR Railfeight (RS) DCC Sound

Class 37/0 Centre Headcode 37371 BR Railfeight (Red Stipe) DCC Sound Fitted The British Rail Class 37 is a favourite among enthusiasts and modellers alike and, having been a firm fixture in the Bachmann Branchline OO scale range for many years, in 2022 an all-new model of this iconic locomotive was launched. Built to unprecedented levels of accuracy and fidelity, the new Branchline model incorporates the latest technology and shares many common features and specifications with the award winning Bachmann Branchline Class 47. Finished in BR Railfreight Red Stripe livery, this Class 37/0 depicts No. 37371 and is supplied complete with SOUND FITTED. Following in the footsteps of the Class 47, our all-new OO scale Class 37 has been designed from the rails up to ensure this classic locomotive is modelled in all its glory. With high fidelity mouldings, numerous separately fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives, our new 37 is brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos. Along with an exceptional array of lighting features, our Dual Fitted speaker system is fitted to all models bringing this SOUND FITTED model to life. FEATURES: Pristine BR Railfreight (Red Stripe) livery Running No. 37371 SOUND FITTED - Fitted with a Zimo MS450P22 DCC Sound Decoder Length 245mm DETAIL VARIATIONS SPECIFIC TO THIS MODEL: Central Headcode Panels – Plated and fitted with Marker Lights Headboard Clips High Intensity Headlight Bufferbeam Valance Removed Coupling Bash Plate Oval Buffers Original Windscreen English Electric Cantrail Grilles Welded Boiler Roof Blanked Boiler Port and Safety Valves Sealed Water Filler Door and Plated Access Steps Fabricated Bogies Original Speedo Drive Twin Fuel Tanks with Ex-Water Tank Gauges Plated Over - Era 8 - OO Scale

Graham Farish BR Mk1 CK Composite Corridor BR (WR) Chocolate & Cream No. W150

BR Mk1 CK Composite Corridor BR (WR) Chocolate & Cream No. W15060 Crowned as Model of the Year when they were first introduced, the Graham Farish Mk1 Coaches continue to provide N scale modellers with a masterpiece in miniature, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR Chocolate & Cream livery Running No. W15060 BR1 Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 136mm - Era 5 - N Scale

Graham Farish BR Mk1 CK Composite Corridor BR (WR) Chocolate & Cream NoW15072

BR Mk1 CK Composite Corridor BR (WR) Chocolate & Cream No. W15072 Crowned as Model of the Year when they were first introduced, the Graham Farish Mk1 Coaches continue to provide N scale modellers with a masterpiece in miniature, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR Chocolate & Cream livery Running No. W15072 BR1 Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 136mm - Era 5 - N Scale

Graham Farish BR Mk1 BG Brake Gangwayed BR Maroon No. M81314

BR Mk1 BG Brake Gangwayed BR Maroon No. M81314 Crowned as Model of the Year when they were first introduced, the Graham Farish Mk1 Coaches continue to provide N scale modellers with a masterpiece in miniature, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR Maroon livery Running No. M81314 BR1 Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 122mm - Era 5 - N Scale

Graham Farish BR Mk1 BG Brake Gangwayed BR Crimson & Cream

BR Mk1 BG Brake Gangwayed BR Crimson & Cream Crowned as Model of the Year when they were first introduced, the Graham Farish Mk1 Coaches continue to provide N scale modellers with a masterpiece in miniature, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR Crimson & Cream livery Running No. E80803 BR1 Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 122mm - Era 4 - N Scale

Graham Farish BR Mk1 SK Second Corridor BR Sealink

BR Mk1 SK Second Corridor BR Sealink Crowned as Model of the Year when they were first introduced, the Graham Farish Mk1 Coaches continue to provide N scale modellers with a masterpiece in miniature, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR Sealink livery Running No. SC24856 BR1 Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 136mm - Era 7 - N Scale

Graham Farish Class 90/0 90042 Freightliner 'PowerHaul'

Class 90/0 90042 Freightliner 'PowerHaul' Includes: - Pristine Freightliner ‘Powerhaul’ livery - Running No. 90042 - Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A - Rectangular Freight Buffers - Screw link Couplings - TDM Cables fitted to the Buffer Sides - Large Battery Charger - Battery Boxes and Switch with Hinged Access Panels which are Ribbed - Coreless, twin shaft motor with two flywheels providing drive to both bogies - All axle drive - Electrical pickup from all wheels - Separate metal bearings fitted to each axle - Accessory Bag - N scale Locomotive information and history: Fifty Class 90 locomotives were ordered by British Rail in 1986 to replace the ageing Class 85 fleet on West Coast Main Line duties, whilst also allowing BR to cascade a number of Class 86s to East Anglia. Constructed at British Rail Engineering Limited, Crewe, the new locomotives were initially classified as 87/2s however this was soon changed to Class 90 as the design featured a completely new body-shell – although much of the technology within was shared with the Class 87s.   Construction of the 110mph rated locomotives was completed in 1990 and the fleet was split between different sectors of British Rail – 15 were allocated to InterCity services, five for Rail Express Systems (mail and parcels traffic) and the remaining 30 for Railfreight Distribution. Most of those allocated to Railfreight Distribution would later be downgraded to 75mph and reclassified as 90/1s numbered in the 901xx series following work to isolate the Electric Train Heating and push-pull equipment making them dedicated freight locos. Upon privatisation the Class 90 fleet was split between Virgin Trains, EWS and Freightliner. By 1999 all of the Class 90/1s acquired by EWS had been converted back to 90/0s due to an increased requirement for passenger locomotives to work contracted ScotRail sleeper trains and for hire to GNER for East Coast Main Line services. Further renumbering by EWS occurred when nine locos were fitted with different brake blocks and these became Class 90/2s numbered in the 902xx series. The Freightliner locos were also converted back to their original specification in the early 2000s. The Class 90s have carried numerous liveries including three decorated in European liveries for the Freightconnection event in 1992 which coincided with the opening of the Channel Tunnel to freight services. No. 90128 was decorated in SNCB turquoise (Belgium), No. 90129 in DB red (Germany) and No. 90130 in SNCF orange and grey (France) and each carried the name Freightconnection in their respective languages, alongside No. 90022 which was named ‘Freightconnection’ and carried Railfreight Distribution livery.   The majority of the Class have carried names whilst in service and the 90s have appeared a variety of other post-Privatisation liveries such as GNER, DB Schenker, First ScotRail, One (Anglia), Greater Anglia, National Express, DRS and Malcolm Logistics. Today, Class 90s remain in operation with Freightliner, DB Cargo UK (ex-EWS/DB Schenker) and most recently Locomotive Services which has acquired Nos. 90001 and 90002 and repainted them into InterCity Swallow livery for use on charters and excursions.

Graham Farish Class 90/0 90042 Freightliner 'PowerHaul' DCC Sound Fitted

Class 90/0 90042 Freightliner 'PowerHaul' Includes: - Sound Fitted - Pristine Freightliner ‘Powerhaul’ livery - Running No. 90042 - Rectangular Freight Buffers - Screw link Couplings - TDM Cables fitted to the Buffer Sides - Large Battery Charger - Battery Boxes and Switch with Hinged Access Panels which are Ribbed - Coreless, twin shaft motor with two flywheels providing drive to both bogies - All axle drive - Electrical pickup from all wheels - Separate metal bearings fitted to each axle - Accessory Bag - N scale Locomotive information and history: Fifty Class 90 locomotives were ordered by British Rail in 1986 to replace the ageing Class 85 fleet on West Coast Main Line duties, whilst also allowing BR to cascade a number of Class 86s to East Anglia. Constructed at British Rail Engineering Limited, Crewe, the new locomotives were initially classified as 87/2s however this was soon changed to Class 90 as the design featured a completely new body-shell – although much of the technology within was shared with the Class 87s. Construction of the 110mph rated locomotives was completed in 1990 and the fleet was split between different sectors of British Rail – 15 were allocated to InterCity services, five for Rail Express Systems (mail and parcels traffic) and the remaining 30 for Railfreight Distribution. Most of those allocated to Railfreight Distribution would later be downgraded to 75mph and reclassified as 90/1s numbered in the 901xx series following work to isolate the Electric Train Heating and push-pull equipment making them dedicated freight locos. Upon privatisation the Class 90 fleet was split between Virgin Trains, EWS and Freightliner. By 1999 all of the Class 90/1s acquired by EWS had been converted back to 90/0s due to an increased requirement for passenger locomotives to work contracted ScotRail sleeper trains and for hire to GNER for East Coast Main Line services. Further renumbering by EWS occurred when nine locos were fitted with different brake blocks and these became Class 90/2s numbered in the 902xx series. The Freightliner locos were also converted back to their original specification in the early 2000s. The Class 90s have carried numerous liveries including three decorated in European liveries for the Freightconnection event in 1992 which coincided with the opening of the Channel Tunnel to freight services. No. 90128 was decorated in SNCB turquoise (Belgium), No. 90129 in DB red (Germany) and No. 90130 in SNCF orange and grey (France) and each carried the name Freightconnection in their respective languages, alongside No. 90022 which was named ‘Freightconnection’ and carried Railfreight Distribution livery. The majority of the Class have carried names whilst in service and the 90s have appeared a variety of other post-Privatisation liveries such as GNER, DB Schenker, First ScotRail, One (Anglia), Greater Anglia, National Express, DRS and Malcolm Logistics. Today, Class 90s remain in operation with Freightliner, DB Cargo UK (ex-EWS/DB Schenker) and most recently Locomotive Services which has acquired Nos. 90001 and 90002 and repainted them into InterCity Swallow livery for use on charters and excursions.

Airfix Gift Set: 617 SQN. Dambusters 80th Anniversary (1:72)

Dambusters 80th Anniversary - Gift Set As the first of 20 modified Avro Lancasters arrived at RAF Scampton on 8th April 1943, the specially assembled volunteer crews of specialist 'Squadron X' (later allocated the RAF squadron number 617) from within 5 Group Bomber Command must have been intrigued. The new aircraft were B.III (Specials), referred to at Avro's Woodford factory as Lancaster Type 464 Provisioning and each one had been modified with equipment to deliver the Vickers Type 464 'Upkeep' mine. Although the mines had not been delivered to Scampton at that time, talk amongst the crews inevitably turned to discussing their intended target, with most assuming they would be sent to attack the massive German battleship Tirpitz. As more Lancaster's arrived, the commander of this new squadron, Wing Commander Guy Gibson, selected Lancaster ED932/AJ-G as his own aircraft, due to the fact that the bomber's codes were the same as his father's initials, Alexander James Gibson. Gibson and the crew of ED932 were amongst the first to train with their new aircraft and their unusual bombs, releasing their mines at a test site at Reculver on the north Kent coast from 12th May 1943, just five days before crews embarked on their historic raid. After a period of intense training and on the day prior to the raid, Gibson was finally briefed on the intended targets - 'Operation Chastise' would be striking at the industrial heart of Germany, the great dams of the Ruhr Valley. At 21.39 on 16th May 1943, Gibson and Lancaster ED932 took off from RAF Scampton at the head of the first attack wave of nine Lancasters heading for the Mohne Dam, flying a route over Suffolk, then the North Sea, crossing the Dutch coast at Zeeland, before heading inland attempting to avoid known areas of Luftwaffe defences. As Gibson and his crew made their attack run on the Mohne Dam, the other Lancasters of the first wave circled the target area, watching the effectiveness of the attack run and waiting for the instruction to commence their own attack. Having released their mine, Gibson and his crew flew alongside the other aircraft during their attacks, attempting to draw enemy fire away from the attacking aircraft, giving them the best chance of effecting a breach. The fifth mine dropped was a perfect run and exploded in exactly the right place to cause the already weakened dam to fail – they had done it. In the years which followed, this incredible operation was referred to as the 'Dambusters Raid' and No.617 Squadron would become one of the RAF's most famous units. 'Operation Chastise' was heralded as a spectacular success for Bomber Command, but at a heavy cost, as eight Lancasters and 53 airmen failed to return. Includes: - Detailed plastic kits of F-35B Lightning and Avro Lancaster - Cockpit detailing includes Pilots - Optional undercarriage (up or down positions) - Lancaster Features the famous "Bouncing Bomb" designed and developed by Sir Barnes Wallis - Armament detailing - Waterslide transfers/decals - 2x Display stands - Glue, paints and brushes included - 1:72 Scale

Hornby BR, Class 60, Co-Co, 60001 'Steadfast' - Era 8

BR, Class 60, Co-Co, 60001 'Steadfast' No. 60001, the first of the Class 60s to be delivered, was handed over to British Rail in 1989 after being ordered only 13 months earlier. The locomotive was named 'Steadfast' as the result of a suggestion competition. 'Steadfast' would go on to be operated by EWS until an engine failure in 2006, which forced the locomotive out of service until an overhaul in 2013. - 21 Pin DCC Decoder Socket - Era 8 - OO Scale

Graham Farish Class 60 60100 'Midland Railway - Butterley' DB Cargo S/Fitted

Class 60 60100 'Midland Railway - Butterley' DB Cargo Sound Fitted   MODEL FEATURES: Pristine DB Cargo livery Running No. 60100 Named ‘Midland Railway - Butterley’ Accessory pack NEM Coupling Pockets Powerful Coreless Motor Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each (*when used on DCC) SOUND FITTED – Fitted with a Zimo MS590N18 Sound Decoder – See below for the function list Length 144mm - Era 9 - N Scale

Graham Farish Class 08 08785 Freightliner G&W S/F

Class 08 08785 Freightliner G&W S/F Features: Era 9 Pristine Freightliner G&W livery Running No. 08785 Accessory Pack NEM Coupling Pockets Powerful Coreless Motor Speaker Fitted DCC SOUND FITTED - Fitted with a Zimo MX659N18 Sound Decoder  - N Scale

Graham Farish Class 08 08833 'Liverpool Street Pilot' BR/GER Lined Blue S/F

Class 08 08833 'Liverpool Street Pilot' BR/GER Lined Blue S/F Features: Era 8 Pristine GER/BR Lined Blue (Early Emblem) livery Running No. 08833 Named ‘Liverpool Street Pilot’ Accessory Pack NEM Coupling Pockets Powerful Coreless Motor Speaker Fitted DCC SOUND FITTED - Fitted with a Zimo MX659N18 Sound Decoder - N Scale

Oxford Diecast Land Rover Lightweight - Hard Top - Fred Dibnah (1:76)

Land Rover Lightweight - Hard Top - Fred Dibnah Includes: - Diecast model - Distinctive grill and front end - F Dibnah Steeplejack Bolton branding - Custom livery and paint finish - Spare Tyre on the front - Hard top rear - Wheel detail - Display stand - OO Scale Vehicle information and history: Fred Dibnah was an English steeplejack and television personality. He was born in Bolton, Lancashire, England, on 29 April 1938. He became a steeplejack in 1956, and worked on many of the industrial chimneys in the North West of England. He was also a keen collector of steam engines and other machinery. In 1973, Dibnah was featured in a documentary about steeplejacks for the BBC. The documentary was a success, and Dibnah went on to present a number of other television programmes about his work. He was also a regular contributor to radio and newspaper articles. Dibnah was known for his love of old machinery and his traditional methods of working. He was also a skilled storyteller, and his programmes were full of anecdotes and insights into the world of steeplejacking. Dibnah died on 6 November 2004, after a short battle with cancer. He was 66 years old. He was a popular and respected figure, and his death was mourned by many people. Dibnah's legacy lives on through his television programmes and his books. He is considered to be one of the most important figures in the history of steeplejacking, and his work helped to preserve a traditional craft.  

DCC Concepts DCS-MSET Mega Screw Set 16x 60 Vials (w/20 Drill Bit set)

Mega Screw Set 16x 60 Vials (w/20 Drill Bit set)   Mega set of 16 vials each containing 60 panhead (60x 1.0x3mm, 60x 1.0x5mm, 60x 1.0x8mm, 60x 1.5x4mm, 60x 1.5x6mm, 60x 1.5x8mm, 60x 2.0x5mm, & 60x 2.0x8mm) 60 countersunk screws (60x 1.0x3mm, 60x 1.0x5mm, 60x 1.0x8mm, 60x 1.5x4mm, 60x 1.5x6mm, 60x 1.5x8mm, 60x 2.0x5mm, & 60x 2.0x8mm) Set also comes with a 20 piece drillset with HSS titanium covered drills covering 0.3 to 1.6mm. NOTES - screws are now BLACK in colour            - Packaging can vary and might be slightly different from image

DCC Concepts 12-Way Pluggable Connectors (2 pairs)

12-Way Pluggable Connectors (2 pairs) Two pairs of 12 way pluggable connectors, suitable for heavy power connection between baseboards or perhaps the creation of an ‘easy disconnection’ structure between DCC systems and layout, these heavy duty tag strips are able to take a wide range of wires. They are a very strong connector that will last forever! Screws are brass and all pins/sockets are plated solid brass.

Graham Farish Class 60 60044 'Ailsa Craig' Mainline Freight Sound Fitted

Class 60 60044 'Ailsa Craig' Mainline Freight Features: Accessory pack NEM Coupling Pockets Powerful Coreless Motor DCC Sound Fitted – Fitted with a Zimo MZ659N18 Sound Decoder Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each (*when used on DCC) - N Scale    

Graham Farish Class 08 08950 'Neville Hill 1st' BR InterCity Sound Fitted

Class 08 08950 'Neville Hill 1st' BR InterCity (Swallow) Includes - Pristine BR Executive Intercity Livery - Running No. 08950 - Accessory Pack - NEM Coupling Pockets - Powerful Coreless Motor - Speaker Fitted - DCC SOUND FITTED - Fitted with a Zimo MX659N18 Sound Decoder - N Scale Locomotive information and history: The first diesel shunters were pioneered by the LMS which began trialling designs during the 1930s. It soon became apparent that this form of traction offered many advantages over the steam locomotive – the former being ‘ready to use’ as and when required, whereas steam locos had to be kept at the ready even when not required immediately – with the obvious staffing and fuel costs associated with doing so. By the time of Nationalisation in 1948, the LMS had built various shunters and the 12033 series was adopted by BR as the basis for a new standard design of diesel-electric shunting locomotive. As a stop gap whilst the Class 08 was being developed, BR constructed further 12033 series locomotives and these would later be designated as Class 11s. Production of the 08s began in 1952 with the first example, No. 13000, entering traffic in 1953. Construction continued until 1962 and during the ten year period, 996 locomotives were built making the Class 08 the most numerous of all British locomotive classes. In addition, construction of the near-identical Class 09s (26 examples) and Class 10s (171) took the total well above a thousand – the former differed in having higher gearing whilst the latter had different engines and transmission. Built ‘in-house’ at BR’s Crewe, Darlington, Derby, Doncaster and Horwich Works, the 08s were allocated across the BR regions, with many being based at major stations and terminals where stock was marshalled and positioned ready for service, where trains were divided or merged, and of course at many freight facilities. Although they had a top speed of just 15 mph, what the 08s lacked in speed they more than made up for with tractive effort which was more than double that of the 03s and 04s. Although the first example was withdrawn in 1967, just four had gone prior to the introduction of TOPS and despite an ever-decreasing need for shunting locomotives, around a quarter of the Class remained in traffic at the start of the 21st century. Upon Privatisation of British Rail in 1994, EWS inherited many of the survivors, with others going to passenger operators for use as depot shunters. More than a decade later EWS was still operating over 40 of the shunters, with many more in store. Even today, Class 08s can still be found earning their keep at numerous depots, freight facilities and railway workshops. Meanwhile, ever since the first withdrawals Class 08s have been popular machines with heritage railways and today, more than 70 have found a new lease of life in preservation – often carrying out similar tasks to those for which they were designed some seven decades ago.

Airfix Avro Vulcan B.2 (1:72)

Avro Vulcan B.2 Includes: - Highly detailed plastic kit - Cockpit detailing - Cockpit flap and access ladder - Optional undercarriage (Up or down positions) - Body panel and rivet detailing - Wing flaps can be positioned up or down - Bomb bay doors can be modelled open or closed - Full armament  - Waterslide transfers/decals for the following:   - (A) Scheme option B - Avro Vulcan B.Mk.2 XM602, RAF No.12 Squadron As the massive construction hangar doors at Avro’s Woodford factory aerodrome were pushed open on 30th August 1952 and Avro Vulcan prototype VX770 was wheeled out onto the hardstanding, she must have made for an awe-inspiring sight. Looking absolutely resplendent in its all-over white ‘Anti-Flash’ paint finish and proudly wearing its Royal Air Force insignia, what the Avro engineers had managed to produce was not only the world’s first delta bomber, but also the most advanced bomber in the world at that time.- Kit requires glue and paint to complete NOT included    - (B) Scheme option B - Avro Vulcan B.Mk.2 XM602, RAF No.12 Squadron As the massive construction hangar doors at Avro’s Woodford factory aerodrome were pushed open on 30th August 1952 and Avro Vulcan prototype VX770 was wheeled out onto the hardstanding, she must have made for an awe-inspiring sight. Looking absolutely resplendent in its all-over white ‘Anti-Flash’ paint finish and proudly wearing its Royal Air Force insignia, what the Avro engineers had managed to produce was not only the world’s first delta bomber, but also the most advanced bomber in the world at that time. - Kit requires glue and paint to complete NOT included - 1:72 Scale  Aircraft information and history: Occupying a significant position in the history of post war British aviation, the Avro Vulcan was without doubt one of the most distinctive aircraft ever to take to the skies, with its huge delta wing profile becoming almost as iconic as the elliptical wing of the Supermarine Spitfire. Built to satisfy an extremely demanding Air Ministry requirement for a fast, high altitude strategic bomber, capable of carrying a special payload of 10,000 imperial pounds in weight (a nuclear device), the new aircraft was intended to serve as an airborne deterrent to any future military threat against the UK, with the required specifications representing a 100% increase in the capabilities of any previous British bomber aircraft. When the Vulcan made its maiden flight in August 1952, the Avro team were well on the way to presenting the Royal Air Force with not only the worlds first delta bomber, but also one of the worlds most effective strike bombers. Interestingly, all this was achieved just nine years since the Avro Lancasters of RAF No.617 Squadron had launched their famous raid against the great dams of the Ruhr Valley. As the Avro Vulcan entered squadron service with No.83 Squadron at RAF Waddington in July 1957, Britain now possessed the fastest nuclear capable bomber in the world. It seems strange to describe an aircraft which possessed such potential for untold destruction as Britain's most effective peace keeping asset, however, that is exactly what the Vulcan turned out to be. Throughout the aggressive posturing of the Cold War, the Warsaw Pact nations were in no doubt that if they dared to launch an attack against a NATO member country, the consequences of the inevitable retaliatory strike would be catastrophic. Without Doubt, during the early years of its service career, nothing represented this doomsday scenario more effectively than the mighty Avro Vulcan. As the Royal Air Force exhaustively trained their new Vulcan crews to provide Britain with an effective Quick Reaction Alert strike force, Avro engineers were already working to improve the capabilities of their original, iconic design. In order to ensure the aircraft continued to maintain its effective deterrent threat and stayed one step ahead of advances in Easter Bloc fighter and surface-to-air missile technology, designers incorporated developments which endowed the aircraft with greater range, speed and altitude performance. The installation of more powerful versions of the Vulcans Bristol Olympus engines would result in a number of unforeseen stability issues with these first bombers, which concerned designers enough to necessitate a re-design of the original wing shape. By the time the definitive B.2 variant of the Vulcan entered service, the aircrafts wing area had increased significantly and although still classed as a delta, would look quite different from the first bombers which entered service. To cope with the increased power availability from subsequent engine upgrades and to cure the instability issues of the original straight wing design, the B.2 wing had two defined kinks in its leading edge, well forward of the profile of the original wing design. Rather than detract from the pleasing aesthetics of the early Vulcans delta wing, the B.2 actually enhanced the profile of the aircraft and even though these changes were obviously made for reasons of operational effectiveness, as opposed to appearance, the B.2 would go on to be considered the most famous (and most numerous) of all the RAFs Vulcans. The service introduction of the Vulcan B.2 in July 1960 coincided with the availability of more capable nuclear weapons for the V-bomber force, both in number and destructive potential. It would also bring about a change in thinking regarding the delivery of such weapons, as significant advances in Soviet anti-aircraft technology now threatened the success of a free-fall gravity bomb mission. A significant new weapon would have to be developed in order to maintain the deterrent threat of the Vulcan and its V-bomber partners. Developed to maintain the validity of Britain's nuclear deterrent threat, designers at Avro produced the powerful Blue Steel air-launched, nuclear stand-off missile, which would allow V-bomber crews to launch their attacks 100 miles away from their intended target and out of the range of Soviet surface-to-air missile batteries, allowing crews valuable additional time to avoid the resultant blast. Further boosting the effectiveness of the V-bomber force, the arrival of Blue Steel raised the nuclear stakes in Britains favour once more and would have caused much consternation amongst the Warsaw Pact nations. The responsibility of providing Britain's strategic nuclear deterrent passed to the submarines of the Royal Navy in July 1969 and saw the RAF performing its final V-bomber Blue Steel mission late the following year. Although taking on a more conventional strike role, RAF Vulcans would retain a nuclear capability and maintain their position as one of the worlds most effective bombers for the next fourteen years, before finally being withdrawn from service. Due to the affection in which this aircraft was held by the British public, the Vulcan Display Flight was almost immediately formed to operate one aircraft on the UK Airshow circuit for a further nine years, before itself being disbanded. To the amazement of the historic aviation world, the last flying Avro Vulcan, XH558, the aircraft which had previously served as the Vulcan Display Flight aircraft, triumphantly returned to the air once more, this time in the hands of a civilian organisation in October 2007. Over the course of the next eight years, the Vulcan thrilled millions of people around the country, becoming something of an aviation national treasure a relic of the Cold War which was held in great public affection.

Gaugemaster Point Motor Accessory Pack

Gaugemaster - Point Motor Accessory Pack Contains 5 spare extension pins and collars, 20 attachment screws and a screwdriver for your GMC-PM10 Point Motors. The set also includes five ballast stickers which come with a pre-cut slot, which allow you to hide the hole in your baseboard created when you drill a hole in your baseboard for your point motor tie bar.

Peco PL1000 TwistLock Motor

PL1000 TwistLock Motor - Designed to make attachment under a baseboard easier. Includes: - template to align the Solenoid motor in position easily - Self tapping screws - Suitable for N up to O Gauge

Peco Mounting Plates for use with PL10

Mounting Plates - Designed for solenoid Point motor PL10E (extended Pin Motor) for underneath the baseboard mounting - The point motor sits into the mounting plate via the extended legs on the motor (these are than twisted using fine pliers or tweezers to secure motor to the mounting plate) - Comes with self tapping wood screws to secure mounting plate to baseboard

Airfix Starter Set: Sherman Firefly (1:72)

Sherman Firefly Set As Allied forces began to move off the D-Day beaches and into the Normandy countryside, they knew they would be facing strong opposition from German Panzer units, including the feared Heavy Tank Battalions. Fortunately, they now had a tank which was capable of taking on the Tigers and Panthers, in the form of the Sherman Firefly, a British designed marriage of the M4 Sherman and their famous 17-pounder anti-tank gun. Usually deployed in a ratio of one Firefly to four standard Shermans, German tank commanders soon learned to look for the longer barrel of the Firefly and attempt to knock these tanks out first. In order to make identification more difficult, British crews would camouflage the front of their guns with light coloured paint, giving their tank the appearance of a standard 75mm equipped Sherman, hoping this deception would give them enough time to get in the first shot during any engagement. Includes: - Sherman firefly tank - Waterslide Transfers/decals - Glue, paints and brushes included - 1:72 Scale