Bachmann GCR 9J (J11) 64305 BR Black (Early Emblem)

GCR 9J (J11) 64305 BR Black (Early Emblem) The Great Central Railway was a big mover of goods and amongst the locomotives it built for this purpose were the 9J 0-6-0s. Upon becoming part of the LNER in 1924 the 9Js were reclassified as J11s and this designation stayed remained into British Railways life and until withdrawal. Nicknamed ‘Pom Poms’ because their exhaust noise sounded very similar to the guns of the same name, these freight workhorses are replicated in OO scale by Bachmann Branchline. The J11s carried all the hallmarks of a locomotive designed by the GCR’s Chief Mechanical Engineer John G. Robinson and these features are replicated on the Branchline model using a precision moulded boiler, smokebox and firebox mounted on a diecast metal running plate. The distinctive Robinson cab is another high-fidelity moulding, within which boiler backhead is replicated using an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. The GCR tender has a distinctive look too with its high capacity and flared top edges, and again these trademark features are captured in miniature using high-fidelity mouldings. Coupling to the locomotive via a drawbar that is adjustable to suit individual layout conditions, electrical connections are integrated into it and a hinged fallplate is also fitted to the tender. Across the model separate components are added, from the metal handrails and sprung metal buffers, to the lamp irons at the front and rear, to complete the look of this freight machine. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. The black colour scheme is replicated with the usual care and attention that you expect from Bachmann Branchline, resulting in a paint finish that is rich and consistent throughout. Details like the running number, plates and plaques are then added using precision printing techniques for full authenticity. The Branchline J11 runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine BR Black Early Emblem livery Running No. 64305 Riveted Smokebox Door with Twin Handwheels, Numberplate and Lamp Iron mounted on the Smokebox Door LNER ‘Plantpot’ Chimney Snifter Valve LNER lowered Dome Ross Pop Safety Valves Parallel Buffer Shanks with End Collars Wakefield Lubricator (fitted to the left hand side) Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 220mm (over couplings) - OO Scale

Bachmann GCR 9J (J11) 64305 BR Black (Early Emblem) (Sound Fitted)

GCR 9J (J11) 64305 BR Black (Early Emblem) (Sound Fitted) The Great Central Railway was a big mover of goods and amongst the locomotives it built for this purpose were the 9J 0-6-0s. Upon becoming part of the LNER in 1924 the 9Js were reclassified as J11s and this designation stayed remained into British Railways life and until withdrawal. Nicknamed ‘Pom Poms’ because their exhaust noise sounded very similar to the guns of the same name, these freight workhorses are replicated in OO scale by Bachmann Branchline. The J11s carried all the hallmarks of a locomotive designed by the GCR’s Chief Mechanical Engineer John G. Robinson and these features are replicated on the Branchline model using a precision moulded boiler, smokebox and firebox mounted on a diecast metal running plate. The distinctive Robinson cab is another high-fidelity moulding, within which boiler backhead is replicated using an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. The GCR tender has a distinctive look too with its high capacity and flared top edges, and again these trademark features are captured in miniature using high-fidelity mouldings. Coupling to the locomotive via a drawbar that is adjustable to suit individual layout conditions, electrical connections are integrated into it and a hinged fallplate is also fitted to the tender. Across the model separate components are added, from the metal handrails and sprung metal buffers, to the lamp irons at the front and rear, to complete the look of this freight machine. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. The black colour scheme is replicated with the usual care and attention that you expect from Bachmann Branchline, resulting in a paint finish that is rich and consistent throughout. Details like the running number, plates and plaques are then added using precision printing techniques for full authenticity. The Branchline J11 runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine BR Black Early Emblem livery Running No. 64305 Riveted Smokebox Door with Twin Handwheels, Numberplate and Lamp Iron mounted on the Smokebox Door LNER ‘Plantpot’ Chimney Snifter Valve LNER lowered Dome Ross Pop Safety Valves Parallel Buffer Shanks with End Collars Wakefield Lubricator (fitted to the left hand side) Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 220mm (over couplings) - OO Scale

Bachmann GCR 9J 295 GCR Lined Black (Sound Fitted)

GCR 9J 295 GCR Lined Black (Sound Fitted) The Great Central Railway was a big mover of goods and amongst the locomotives it built for this purpose were the 9J 0-6-0s. Nicknamed ‘Pom Poms’ because their exhaust noise sounded very similar to the guns of the same name, these freight workhorses are replicated in OO scale by Bachmann Branchline. The 9Js carried all the hallmarks of a locomotive designed by the GCR’s Chief Mechanical Engineer John G. Robinson and these features are replicated on the Branchline model using a precision moulded boiler, smokebox and firebox mounted on a diecast metal running plate. The distinctive Robinson cab is another high-fidelity moulding, within which boiler backhead is replicated using an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. The GCR tender has a distinctive look too with its high capacity and flared top edges, and again these trademark features are captured in miniature using high-fidelity mouldings. Coupling to the locomotive via a drawbar that is adjustable to suit individual layout conditions, electrical connections are integrated into it and a hinged fallplate is also fitted to the tender. Across the model separate components are added, from the metal handrails and sprung metal buffers, to the lamp irons at the front and rear, to complete the look of this freight machine. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. The black colour scheme with its ornate three-colour lining is reproduced to exquisite effect, with a rich and consistent finish throughout. The Great Central lettering and company crest on the tender is the icing on the cake, comprising no fewer than six separate colours and replicated using precision printing techniques for full authenticity. The Branchline 9J runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine Great Central Railway Lined Black livery Running No. 295 Smooth Smokebox Door with original Handwheel Top Front Lamp Iron mounted above the Smokebox Door Robinson Tapered Chimney Draught Retarder Original Tall Dome Ramsbottom Safety Valves Parallel Buffer Shanks with End Collars Central Rib on Cab Roof Tender fitted with Water Pick-Up Gear Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 220mm (over couplings) - OO Scale

Bachmann Class 66/8 66847 'Terry Baker' Colas Rail Freight (SFD)

Class 66/8 66847 'Terry Baker' Colas Rail Freight (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Colas Rail Freight livery Running No. 66847 Named ‘Terry Baker’ Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original ‘Bug-Eye’ Light Clusters (2-Lamps, Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/8 66850 'David Maidment OBE' Colas Rail Freight

Class 66/8 66850 'David Maidment OBE' Colas Rail Freight The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Colas Rail Freight livery Running No. 66850 Named ‘David Maidment OBE’ Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original ‘Bug-Eye’ Light Clusters (2-Lamps, Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/8 66850 'David Maidment OBE' Colas Rail Freight (SF)

Class 66/8 66850 'David Maidment OBE' Colas Rail Freight (Sound Fitted) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Colas Rail Freight livery Running No. 66850 Named ‘David Maidment OBE’ Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original ‘Bug-Eye’ Light Clusters (2-Lamps, Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/8 66850 'David Maidment OBE' Colas Rail Freight (SFD)

Class 66/8 66850 'David Maidment OBE' Colas Rail Freight (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Colas Rail Freight livery Running No. 66850 Named ‘David Maidment OBE’ Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original ‘Bug-Eye’ Light Clusters (2-Lamps, Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/7 66761 'Wensleydale Railway Association' GBRf (SF)

Class 66/7 66761 'Wensleydale Railway Association' GBRf Europorte (Sound Fitted) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine GBRf ‘Europorte’ livery Running No. 66761 Named ‘Wensleydale Railway Association’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof and Modern Communication Pod Fitted 2 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Wrap-Around Control Panels Revised Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/7 66761 'Wensleydale Railway Association' GBRf (SFD)

Class 66/7 66761 'Wensleydale Railway Association' GBRf Europorte (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine GBRf ‘Europorte’ livery Running No. 66761 Named ‘Wensleydale Railway Association’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof and Modern Communication Pod Fitted 2 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Wrap-Around Control Panels Revised Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/7 66761 'Wensleydale Railway Association'GBRf Europorte

Class 66/7 66761 'Wensleydale Railway Association' GBRf Europorte The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine GBRf ‘Europorte’ livery Running No. 66761 Named ‘Wensleydale Railway Association’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof and Modern Communication Pod Fitted 2 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Wrap-Around Control Panels Revised Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/7 66777 'Annette' GBRf Europorte

Class 66/7 66777 'Annette' GBRf Europorte The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine GBRf ‘Europorte’ livery Running No. 66777 Named ‘Annette’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof and Modern Communication Pod Fitted 2 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Wrap-Around Control Panels Revised Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/7 66777 'Annette' GBRf Europorte (Sound Fitted Deluxe)

Class 66/7 66777 'Annette' GBRf Europorte (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine GBRf ‘Europorte’ livery Running No. 66777 Named ‘Annette’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof and Modern Communication Pod Fitted 2 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Wrap-Around Control Panels Revised Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/7 66777 'Annette' GBRf Europorte (Sound Fitted)

Class 66/7 66777 'Annette' GBRf Europorte (Sound Fitted) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine GBRf ‘Europorte’ livery Running No. 66777 Named ‘Annette’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof and Modern Communication Pod Fitted 2 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Wrap-Around Control Panels Revised Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/8 66847 'Terry Baker' Colas Rail Freight

Class 66/8 66847 'Terry Baker' Colas Rail Freight The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Colas Rail Freight livery Running No. 66847 Named ‘Terry Baker’ Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original ‘Bug-Eye’ Light Clusters (2-Lamps, Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/3 66304 DRS Plain Blue (Sound Fitted)

Class 66/3 66304 DRS Plain Blue (Sound Fitted) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66304 ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue

Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66422 Named ‘Max Joule 1958-1999’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue (SF)

Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue (Sound Fitted)  The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66422 Named ‘Max Joule 1958-1999’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue (SFD)

Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66422 Named ‘Max Joule 1958-1999’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/5 66501 Freightliner 60 1965-2025 Orange

Class 66/5 66501 Freightliner 60 1965-2025 Orange  The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. Details: Pristine Freightliner 60 1965-2025 Freightliner Orange livery Running No. 66501 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Revised LED Light Clusters (2-Lamps, Small Light Boxes) Small Top Light Box with LED Light Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof 4 Cab Vents 4 Securing Lugs at each End – Widely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Angled Sandpipe Brackets Perforated Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 66/5 66501 Freightliner 60 1965-2025 Orange (SFD)

Class 66/5 66501 Freightliner 60 1965-2025 Orange (Sound Fitted Deluxe) The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. Details: Pristine Freightliner 60 1965-2025 Freightliner Orange livery Running No. 66501 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Revised LED Light Clusters (2-Lamps, Small Light Boxes) Small Top Light Box with LED Light Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof 4 Cab Vents 4 Securing Lugs at each End – Widely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Angled Sandpipe Brackets Perforated Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 66/5 66501 Freightliner 60 1965-2025 Orange (Sound Fitted)

Class 66/5 66501 Freightliner 60 1965-2025 Orange (Sound Fitted)  The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. Details: Pristine Freightliner 60 1965-2025 Freightliner Orange livery Running No. 66501 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Revised LED Light Clusters (2-Lamps, Small Light Boxes) Small Top Light Box with LED Light Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof 4 Cab Vents 4 Securing Lugs at each End – Widely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Angled Sandpipe Brackets Perforated Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 66/5 66515 Freightliner Racing Green (Sound Fitted Deluxe)

Class 66/5 66515 Freightliner Racing Green (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Freightliner Green livery Running No. 66515 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original WIPAC Light Clusters (3-Lamps) Small Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/6 66601 Freightliner 60 1965-2025 Green

Class 66/6 66601 Freightliner 60 1965-2025 Green  The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. Details: Pristine Freightliner 60 1965-2025 Freightliner Green livery Running No. 66601 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Revised LED Light Clusters (2-Lamps, Small Light Boxes) Small Top Light Box with LED Light Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 66/6 66601 Freightliner 60 1965-2025 Green (SFD)

Class 66/6 66601 Freightliner 60 1965-2025 Green (Sound Fitted Deluxe)  The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. Details: Pristine Freightliner 60 1965-2025 Freightliner Green livery Running No. 66601 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Revised LED Light Clusters (2-Lamps, Small Light Boxes) Small Top Light Box with LED Light Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 66/6 66601 Freightliner 60 1965-2025 Green (Sound Fitted)

Class 66/6 66601 Freightliner 60 1965-2025 Green (Sound Fitted) The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. Details: Pristine Freightliner 60 1965-2025 Freightliner Green livery Running No. 66601 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Revised LED Light Clusters (2-Lamps, Small Light Boxes) Small Top Light Box with LED Light Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 66/6 66606 Freightliner Racing Green (Sound Fitted Deluxe)

Class 66/6 66606 Freightliner Racing Green (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Freightliner Green livery Running No. 66606 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original WIPAC Light Clusters (3-Lamps) Small Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/0 66096 EWS

Class 66/0 66096 EWS The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine EWS livery Running No. 66096 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original WIPAC Light Clusters (3-Lamps) Small Top Light Box Standard UK Pattern Buffers Combination Drawgear with Buckeye Couplings Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 2 Securing Lugs at each End Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Angled Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/3 66304 DRS Plain Blue

Class 66/3 66304 DRS Plain Blue The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66304 ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/3 66304 DRS Plain Blue (Sound Fitted Deluxe)

Class 66/3 66304 DRS Plain Blue (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66304 ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/0 66015 EWS

Class 66/0 66015 EWS The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine EWS livery Running No. 66015 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original WIPAC Light Clusters (3-Lamps) Small Top Light Box Standard UK Pattern Buffers Combination Drawgear with Buckeye Couplings Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 2 Securing Lugs at each End Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Angled Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann LMS 8F with Riveted Tender 8036 LMS Black (Sound Fitted)

LMS 8F with Riveted Tender 8036 LMS Black (Sound Fitted) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Pristine LMS Black Livery Running No. 8036 Riveted Stanier 4,000-gallon Tender Smokebox Door with Small Numberplate High Front Lamp Iron (Top) Curved Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Riveted Tender 8233 LMS Black

LMS 8F with Riveted Tender 8233 LMS Black The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Locomotive is now Preserved Pristine LMS Black Livery Running No. 8233 Riveted Stanier 4,000-gallon Tender Smokebox Door with Small Numberplate High Front Lamp Iron (Top) Curved Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Riveted Tender 8233 LMS Black (Sound Fitted Deluxe)

LMS 8F with Riveted Tender 8233 LMS Black (Sound Fitted Deluxe) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Locomotive is now Preserved Pristine LMS Black Livery Running No. 8233 Riveted Stanier 4,000-gallon Tender Smokebox Door with Small Numberplate High Front Lamp Iron (Top) Curved Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Riveted Tender 8233 LMS Black (Sound Fitted)

LMS 8F with Riveted Tender 8233 LMS Black (Sound Fitted) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Locomotive is now Preserved Pristine LMS Black Livery Running No. 8233 Riveted Stanier 4,000-gallon Tender Smokebox Door with Small Numberplate High Front Lamp Iron (Top) Curved Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Welded Tender 48305 BR Black (Early Emblem)

LMS 8F with Welded Tender 48305 BR Black (Early Emblem) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Locomotive is now Preserved Pristine BR Black (Early Emblem) Livery Running No. 48305 Welded Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights AWS Equipment Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Welded Tender 48305 BR Black (Early Emblem) (SF)

LMS 8F with Welded Tender 48305 BR Black (Early Emblem) (Sound Fitted) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Locomotive is now Preserved Pristine BR Black (Early Emblem) Livery Running No. 48305 Welded Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights AWS Equipment Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Welded Tender 48305 BR Black (Early Emblem) (SFD)

LMS 8F with Welded Tender 48305 BR Black (Early Emblem) (Sound Fitted Deluxe) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Locomotive is now Preserved Pristine BR Black (Early Emblem) Livery Running No. 48305 Welded Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights AWS Equipment Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Welded Tender 48703 BR Black (Late Crest)

LMS 8F with Welded Tender 48703 BR Black (Late Crest) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Pristine BR Black (Late Crest) Livery Running No. 48703 Welded Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted Low on the Smokebox and with External Pipework Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights AWS Equipment Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Welded Tender 48703 BR Black (Late Crest) (SF)

LMS 8F with Welded Tender 48703 BR Black (Late Crest) (Sound Fitted) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Pristine BR Black (Late Crest) Livery Running No. 48703 Welded Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted Low on the Smokebox and with External Pipework Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights AWS Equipment Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Welded Tender 48703 BR Black (Late Crest) (SFD)

LMS 8F with Welded Tender 48703 BR Black (Late Crest) (Sound Fitted Deluxe) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Pristine BR Black (Late Crest) Livery Running No. 48703 Welded Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted Low on the Smokebox and with External Pipework Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights AWS Equipment Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Riveted Tender 48339 BR Black (Late Crest) [W]

LMS 8F with Riveted Tender 48339 BR Black (Late Crest) [W] The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Weathered BR Black (Late Crest) Livery Running No. 48339 Riveted Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted Low on the Smokebox and with External Pipework Raised Bufferbeam Rivets Cast Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Riveted Tender 48339 BR Black (Late Crest) [W] (SF)

LMS 8F with Riveted Tender 48339 BR Black (Late Crest) [W] (Sound Fitted) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Weathered BR Black (Late Crest) Livery Running No. 48339 Riveted Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted Low on the Smokebox and with External Pipework Raised Bufferbeam Rivets Cast Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Riveted Tender 48339 BR Black (Late Crest) [W] (SFD)

LMS 8F with Riveted Tender 48339 BR Black (Late Crest) [W] (Sound Fitted Deluxe) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Weathered BR Black (Late Crest) Livery Running No. 48339 Riveted Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted Low on the Smokebox and with External Pipework Raised Bufferbeam Rivets Cast Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Riveted Tender 8036 LMS Black

LMS 8F with Riveted Tender 8036 LMS Black The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Pristine LMS Black Livery Running No. 8036 Riveted Stanier 4,000-gallon Tender Smokebox Door with Small Numberplate High Front Lamp Iron (Top) Curved Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Riveted Tender 8036 LMS Black (Sound Fitted Deluxe)

LMS 8F with Riveted Tender 8036 LMS Black (Sound Fitted Deluxe) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Pristine LMS Black Livery Running No. 8036 Riveted Stanier 4,000-gallon Tender Smokebox Door with Small Numberplate High Front Lamp Iron (Top) Curved Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann BR Mk2F TSO Anglia '6148' (OO)

BR Mk2F TSO Anglia '6148' The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate and are fully functional on DCC On Board models (when used on DCC). Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine Anglia livery Running No. 6148 Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 9 - OO Scale

Bachmann BR Mk2F TSO Anglia '6148' (OO) (DCC)

BR Mk2F TSO Anglia '6148' - DCC Fitted The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the livery application is nothing short of exceptional, using authentic colours, logos and fonts to give every model an exquisite appearance. The icing on the cake of this DCC On Board model is the full suite of lighting that is controlled by an integrated DCC Decoder. When used on DCC up to five lighting features can be enjoyed namely the passenger saloon lighting, guard’s compartment lights (where applicable), Door interlock lights (where applicable and each side of the coach is controlled separately) and the tail light which can be set to flash or be constantly on or off – both battery and oil lamps are provided along with a lamp bracket ‘blank’ allowing full customisation of the tail lamp feature to suit any scenario. When used on analogue control, interior lights and the tail lamps will work when power is applied – the latter being switchable between flashing, constant on or off using the switch mounted within the chassis of the model. Features: Pristine Anglia livery Running No. 6148 Interior Lighting Working Tail Lights – Switchable between Flashing/On/Off and with interchangeable lamps/brackets Door Interlock Lights (when used on DCC, the lights on each side are controlled independently of each other) DCC On Board – Integrated DCC Decoder provides full DCC control of the light features Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 9 - OO Scale

Bachmann BR Mk2F FO Anglia '3336' (OO)

BR Mk2F FO Anglia '3336' The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate and are fully functional on DCC On Board models (when used on DCC). Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine Anglia livery Running No. 3336 Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 9 - OO Scale

Bachmann BR Mk2F FO Anglia '3336' (OO) (DCC)

BR Mk2F FO Anglia '3336' - DCC Fitted The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the livery application is nothing short of exceptional, using authentic colours, logos and fonts to give every model an exquisite appearance. The icing on the cake of this DCC On Board model is the full suite of lighting that is controlled by an integrated DCC Decoder. When used on DCC up to five lighting features can be enjoyed namely the passenger saloon lighting, guard’s compartment lights (where applicable), Door interlock lights (where applicable and each side of the coach is controlled separately) and the tail light which can be set to flash or be constantly on or off – both battery and oil lamps are provided along with a lamp bracket ‘blank’ allowing full customisation of the tail lamp feature to suit any scenario. When used on analogue control, interior lights and the tail lamps will work when power is applied – the latter being switchable between flashing, constant on or off using the switch mounted within the chassis of the model. Features: Pristine Anglia livery Running No. 3336 Interior Lighting Working Tail Lights – Switchable between Flashing/On/Off and with interchangeable lamps/brackets DCC On Board – Integrated DCC Decoder provides full DCC control of the light features Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 9 - OO Scale

Bachmann BR Mk2F FO BR Blue & Grey (Inter-City) 'M3430' (OO)

BR Mk2F FO BR Blue & Grey (Inter-City) 'M3430' The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate and are fully functional on DCC On Board models (when used on DCC). Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR Blue & Grey (Inter-City) livery Running No. M3430 Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 7 - OO Scale

Bachmann BR Mk2F FO BR InterCity (Swallow) '3414' (OO)

BR Mk2F FO BR InterCity (Swallow) '3414' The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate and are fully functional on DCC On Board models (when used on DCC). Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR InterCity Swallow livery Running No. 3414 Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 8 - OO Scale

Bachmann BR Mk2F FO BR InterCity (Swallow) '3414' (OO) (DCC)

BR Mk2F FO BR InterCity (Swallow) '3414' The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the livery application is nothing short of exceptional, using authentic colours, logos and fonts to give every model an exquisite appearance. The icing on the cake of this DCC On Board model is the full suite of lighting that is controlled by an integrated DCC Decoder. When used on DCC up to five lighting features can be enjoyed namely the passenger saloon lighting, guard’s compartment lights (where applicable), Door interlock lights (where applicable and each side of the coach is controlled separately) and the tail light which can be set to flash or be constantly on or off – both battery and oil lamps are provided along with a lamp bracket ‘blank’ allowing full customisation of the tail lamp feature to suit any scenario. When used on analogue control, interior lights and the tail lamps will work when power is applied – the latter being switchable between flashing, constant on or off using the switch mounted within the chassis of the model. Features: Pristine BR InterCity Swallow livery Running No. 3414 Interior Lighting Working Tail Lights – Switchable between Flashing/On/Off and with interchangeable lamps/brackets DCC On Board – Integrated DCC Decoder provides full DCC control of the light features Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 8 - OO Scale

Bachmann BR Mk2F RFB Anglia '1218' (OO)

BR Mk2F RFB Anglia '1218' The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate and are fully functional on DCC On Board models (when used on DCC). Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine Anglia livery Running No. 1218 Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 9 - OO Scale

Bachmann BR Mk2F RFB Anglia '1218' (OO) (DCC)

BR Mk2F RFB Anglia '1218' - DCC Fitted The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the livery application is nothing short of exceptional, using authentic colours, logos and fonts to give every model an exquisite appearance. The icing on the cake of this DCC On Board model is the full suite of lighting that is controlled by an integrated DCC Decoder. When used on DCC up to five lighting features can be enjoyed namely the passenger saloon lighting, guard’s compartment lights (where applicable), Door interlock lights (where applicable and each side of the coach is controlled separately) and the tail light which can be set to flash or be constantly on or off – both battery and oil lamps are provided along with a lamp bracket ‘blank’ allowing full customisation of the tail lamp feature to suit any scenario. When used on analogue control, interior lights and the tail lamps will work when power is applied – the latter being switchable between flashing, constant on or off using the switch mounted within the chassis of the model. Features: Pristine Anglia livery Running No. 1218 Interior Lighting Working Tail Lights – Switchable between Flashing/On/Off and with interchangeable lamps/brackets Door Interlock Lights (when used on DCC, the lights on each side are controlled independently of each other) DCC On Board – Integrated DCC Decoder provides full DCC control of the light features Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 9 - OO Scale

Bachmann BR Mk2F TSO Anglia '5921' (OO)

BR Mk2F TSO Anglia '5921' The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate and are fully functional on DCC On Board models (when used on DCC). Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine Anglia livery Running No. 5921 Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 9 - OO Scale

Bachmann BR Mk2F TSO Anglia '5921' (OO) (DCC)

BR Mk2F TSO Anglia '5921' - DCC Fitted The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the livery application is nothing short of exceptional, using authentic colours, logos and fonts to give every model an exquisite appearance. The icing on the cake of this DCC On Board model is the full suite of lighting that is controlled by an integrated DCC Decoder. When used on DCC up to five lighting features can be enjoyed namely the passenger saloon lighting, guard’s compartment lights (where applicable), Door interlock lights (where applicable and each side of the coach is controlled separately) and the tail light which can be set to flash or be constantly on or off – both battery and oil lamps are provided along with a lamp bracket ‘blank’ allowing full customisation of the tail lamp feature to suit any scenario. When used on analogue control, interior lights and the tail lamps will work when power is applied – the latter being switchable between flashing, constant on or off using the switch mounted within the chassis of the model. Features: Pristine Anglia livery Running No. 5921 Interior Lighting Working Tail Lights – Switchable between Flashing/On/Off and with interchangeable lamps/brackets Door Interlock Lights (when used on DCC, the lights on each side are controlled independently of each other) DCC On Board – Integrated DCC Decoder provides full DCC control of the light features Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 9 - OO Scale

Bachmann BR Mk2F DBSO BR Blue & Grey (Inter-City) 'SC9703' (OO) (DCC)

BR Mk2F DBSO BR Blue & Grey (Inter-City) 'SC9703' - DCC Fitted The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. The DBSOs were used in Scotland to work push-pull services, usually with a Class 47/7 locomotive at the other end that had been specially modified to allow push-pull operations. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F DBSO in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panel is completed with metal wire grab handles. The inner end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the inner end, including the ETH socket and cabling, along with pipework and dummy knuckle couplings. It's the cab that makes the DBSO instantly recognisable amongst the Mk2 fleet and here, every detail has been considered, from the glazed cab windows with their separate window wiper to the corridor gangway with its optional cover. Again, a full set of bufferbeam pipework and accessories is included, along with the obstacle deflector, a characteristic feature of the DBSOs when viewed front-on. The light clusters complete the front end and working lights are fitted as standard. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief along with additional details like the speedometers found on the DBSOs. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, guard’s compartment and luggage area, complete with the caging which enclosed it. The livery application is nothing short of exceptional, using authentic colours, logos and fonts to give every model an exquisite appearance. The icing on the cake of this DCC On Board model is the full suite of lighting that is controlled by an integrated DCC Decoder. When used on DCC four separate lighting features can be enjoyed with individual control of the interior, Guard’s compartment and cab lights, plus the directional lights which display red or white according to the direction of travel. When used on analogue control, the interior lights and directional lights will work when power is applied. Features: Pristine BR Blue & Grey (Inter-City) livery Running No. SC9703 Directional Lighting Interior Lighting DCC On Board – Integrated DCC Decoder provides full DCC control of the light features Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 7 - OO Scale

Bachmann BR Mk2F DBSO BR ScotRail '9709' (OO) (DCC)

BR Mk2F DBSO BR ScotRail '9709' - DCC Fitted The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. The DBSOs were used in Scotland to work push-pull services, usually with a Class 47/7 locomotive at the other end that had been specially modified to allow push-pull operations. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F DBSO in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panel is completed with metal wire grab handles. The inner end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the inner end, including the ETH socket and cabling, along with pipework and dummy knuckle couplings. It's the cab that makes the DBSO instantly recognisable amongst the Mk2 fleet and here, every detail has been considered, from the glazed cab windows with their separate window wiper to the corridor gangway with its optional cover. Again, a full set of bufferbeam pipework and accessories is included, along with the obstacle deflector, a characteristic feature of the DBSOs when viewed front-on. The light clusters complete the front end and working lights are fitted as standard. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief along with additional details like the speedometers found on the DBSOs. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, guard’s compartment and luggage area, complete with the caging which enclosed it. The livery application is nothing short of exceptional, using authentic colours, logos and fonts to give every model an exquisite appearance. The icing on the cake of this DCC On Board model is the full suite of lighting that is controlled by an integrated DCC Decoder. When used on DCC four separate lighting features can be enjoyed with individual control of the interior, Guard’s compartment and cab lights, plus the directional lights which display red or white according to the direction of travel. When used on analogue control, the interior lights and directional lights will work when power is applied. Features: Pristine BR ScotRail livery Running No. 9709 Directional Lighting Interior Lighting DCC On Board – Integrated DCC Decoder provides full DCC control of the light features Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 8 - OO Scale

Bachmann BR Mk2F BSO BR Blue & Grey (Inter-City) 'M9516' (OO)

BR Mk2F BSO BR Blue & Grey (Inter-City) 'M9516' The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate and are fully functional on DCC On Board models (when used on DCC). Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR Blue & Grey (Inter-City) livery Running No. M9516 Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 7 - OO Scale

Bachmann BR Mk2F BSO BR InterCity (Swallow) '9513' (OO)

BR Mk2F BSO BR InterCity (Swallow) '9513' The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate and are fully functional on DCC On Board models (when used on DCC). Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR InterCity Swallow livery Running No. 9513 Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 8 - OO Scale

Bachmann LNWR 50ft Arc Roof TC M&GN Brown '81040'

LNWR 50ft Arc Roof Third Corridor M&GN Brown Features: Pristine M&GN Brown livery Running No. 81040 Steel Wheels Gas Lighting – with Roof-mounted Gas Lights and Gas Pipes Gas Cylinders Vacuum Brakes Two-Piece Lavatory Windows Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 223mm (over couplings) - Era 3 - OO Scale

Bachmann LNWR 50ft Arc Roof CC LMS Crimson Lake '4415'

LNWR 50ft Arc Roof Composite Corridor LMS Crimson Lake Features: Pristine LMS Crimson Lake livery Running No. 4415 Steel Wheels Electric Lighting – Roof-mounted Gas Lights and Gas Pipes Removed Battery Boxes Vacuum Brakes Two-Piece Lavatory Windows Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 223mm (over couplings) - Era 3 - OO Scale

Bachmann LNWR 50ft Arc Roof TC LMS Crimson Lake '2326'

LNWR 50ft Arc Roof Third Corridor LMS Crimson Lake Features: Pristine LMS Crimson Lake livery Running No. 2326 Steel Wheels Electric Lighting – Roof-mounted Gas Lights and Gas Pipes Removed Battery Boxes Vacuum Brakes One-Piece Lavatory Windows Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 223mm (over couplings) - Era 3 - OO Scale

Bachmann Pigs x7 (O)

Pigs  Populate your layout with miniature figures from all walks of life. - 7 Pigs in a Pack - O Scale

Bachmann MR 1532 (1P) Tank 58040 BR Lined Black (BR) - DCC Sound Fitted

MR 1532 (1P) Tank 58040 BR Lined Black (British Railways) - DCC Sound Fitted Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 142mm (over couplings) Coreless motor Electrical pickup from all wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities Pivoting and sprung rear pony truck Optional wheelset supplied in the accessory pack with traction tyres fitted, to provide increased haulage capacity where required 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate with integral side tank weights Precision moulded plastic boiler, side tanks and cab Separately applied details including lamp irons, push-pull gear*, condensing apparatus*, handrails, whistle, vacuum pipes and turned brass safety valves* (*where applicable) Highly detailed and decorated cab interior including separately fitted regulator, reverser, handbrake and valve wheels Running gear detailing includes springs, brakes and separately fitted brake gear, sandboxes and sandpipes Glazed cab spectacles Sprung metal buffers Each model supplied with an accessory pack including cab doors, additional bufferbeam pipework, cab steps and screwlink couplings Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in all models for optimum sound reproduction ESU Loksound Micro V5DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Midland Class 1532 (1P) using recordings from real locomotives Details Specific To This Model: Pristine BR Lined Black ‘British Railways’ Livery Running No. 58040 Belpaire Boiler Standard Side Tanks Welded Side Tanks and Bunker High Cab Front Windows Straight-Sided Bunker with 3-Bar Coal Rails Standard Lamp Irons Deeley 3’ Chimney Rivetted Smokebox Smokebox Door with BR Style Numberplate Low Smokebox Door Handrail Push-Pull Fitted Large Vacuum Exhauster Sandboxes Fitted Between Driving Wheels Running Plate Steps   The Midland Railway Class 1532, alongside a number of similar 0-4-4T designs, formed the backbone of Midland Railway local and light passenger duties for decades, and now the OO scale model of this ornate prototype returns to the Bachmann Branchline range. Although the first examples were built in 1881, almost seventy years later British Railways inherited many of these Victorian machines following Nationalisation and set them to work on the branch lines and local services with which they were already very familiar. Reproduced as this marvel in miniature, the Branchline model comes packed with an impressive level of detail wherever you look. A significant proportion of the 1P is made from diecast metal, with fine engraving and detailing, which is complemented by precision moulded components capturing every aspect of the prototype in high fidelity. Sprung buffers are fitted to each bufferbeam, whilst in the cab, the locomotive controls are faithfully captured and decorated authentically. - Era 4 - OO Scale

Bachmann MR 1532 (1P) Tank 58051 BR Lined Black (E/E) - DCC Sound Fitted

MR 1532 (1P) Tank 58051 BR Lined Black (Early Emblem) - DCC Sound Fitted Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 142mm (over couplings) Coreless motor Electrical pickup from all wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities Pivoting and sprung rear pony truck Optional wheelset supplied in the accessory pack with traction tyres fitted, to provide increased haulage capacity where required 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate with integral side tank weights Precision moulded plastic boiler, side tanks and cab Separately applied details including lamp irons, push-pull gear*, condensing apparatus*, handrails, whistle, vacuum pipes and turned brass safety valves* (*where applicable) Highly detailed and decorated cab interior including separately fitted regulator, reverser, handbrake and valve wheels Running gear detailing includes springs, brakes and separately fitted brake gear, sandboxes and sandpipes Glazed cab spectacles Sprung metal buffers Each model supplied with an accessory pack including cab doors, additional bufferbeam pipework, cab steps and screwlink couplings Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in all models for optimum sound reproduction ESU Loksound Micro V5DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Midland Class 1532 (1P) using recordings from real locomotives Details Specific To This Model: Pristine BR Lined Black Early Emblem Livery Running No. 58051 Belpaire Boiler Standard Side Tanks Welded Side Tanks and Bunker High Cab Front Windows Straight-Sided Bunker with 3-Bar Coal Rails Standard Lamp Irons Deeley 3’ Chimney Rivetted Smokebox Smokebox Door with BR Style Numberplate Low Smokebox Door Handrail Push-Pull Fitted Large Vacuum Exhauster Sandboxes Fitted Between Driving Wheels Running Plate Steps   The Midland Railway Class 1532, alongside a number of similar 0-4-4T designs, formed the backbone of Midland Railway local and light passenger duties for decades, and now the OO scale model of this ornate prototype returns to the Bachmann Branchline range. Although the first examples were built in 1881, almost seventy years later British Railways inherited many of these Victorian machines following Nationalisation and set them to work on the branch lines and local services with which they were already very familiar. Reproduced as this marvel in miniature, the Branchline model comes packed with an impressive level of detail wherever you look. A significant proportion of the 1P is made from diecast metal, with fine engraving and detailing, which is complemented by precision moulded components capturing every aspect of the prototype in high fidelity. Sprung buffers are fitted to each bufferbeam, whilst in the cab, the locomotive controls are faithfully captured and decorated authentically. - Era 4 - OO Scale

Bachmann MR 1532 (1P) Tank 58056 BR Lined Black (E/E) - DCC Sound Fitted

MR 1532 (1P) Tank 58056 BR Lined Black (Early Emblem) - DCC Sound Fitted Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 142mm (over couplings) Coreless motor Electrical pickup from all wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities Pivoting and sprung rear pony truck Optional wheelset supplied in the accessory pack with traction tyres fitted, to provide increased haulage capacity where required 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate with integral side tank weights Precision moulded plastic boiler, side tanks and cab Separately applied details including lamp irons, push-pull gear*, condensing apparatus*, handrails, whistle, vacuum pipes and turned brass safety valves* (*where applicable) Highly detailed and decorated cab interior including separately fitted regulator, reverser, handbrake and valve wheels Running gear detailing includes springs, brakes and separately fitted brake gear, sandboxes and sandpipes Glazed cab spectacles Sprung metal buffers Each model supplied with an accessory pack including cab doors, additional bufferbeam pipework, cab steps and screwlink couplings Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in all models for optimum sound reproduction ESU Loksound Micro V5DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Midland Class 1532 (1P) using recordings from real locomotives Details Specific To This Model: Pristine BR Lined Black Early Emblem Livery Running No. 58056 Belpaire Boiler Standard Side Tanks Welded Side Tanks and Bunker High Cab Front Windows Straight-Sided Bunker with 3-Bar Coal Rails Standard Lamp Irons Deeley 3’ Chimney Rivetted Smokebox Smokebox Door with BR Style Numberplate Low Smokebox Door Handrail Push-Pull Fitted Large Vacuum Exhauster Sandboxes Fitted Between Driving Wheels Running Plate Steps   The Midland Railway Class 1532, alongside a number of similar 0-4-4T designs, formed the backbone of Midland Railway local and light passenger duties for decades, and now the OO scale model of this ornate prototype returns to the Bachmann Branchline range. Although the first examples were built in 1881, almost seventy years later British Railways inherited many of these Victorian machines following Nationalisation and set them to work on the branch lines and local services with which they were already very familiar. Reproduced as this marvel in miniature, the Branchline model comes packed with an impressive level of detail wherever you look. A significant proportion of the 1P is made from diecast metal, with fine engraving and detailing, which is complemented by precision moulded components capturing every aspect of the prototype in high fidelity. Sprung buffers are fitted to each bufferbeam, whilst in the cab, the locomotive controls are faithfully captured and decorated authentically. - Era 4 - OO Scale

Bachmann MR 1532 (1P) Tank 1295 LMS Black - DCC Sound Fitted

MR 1532 (1P) Tank 1295 LMS Black - DCC Sound Fitted Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 142mm (over couplings) Coreless motor Electrical pickup from all wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities Pivoting and sprung rear pony truck Optional wheelset supplied in the accessory pack with traction tyres fitted, to provide increased haulage capacity where required 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate with integral side tank weights Precision moulded plastic boiler, side tanks and cab Separately applied details including lamp irons, push-pull gear*, condensing apparatus*, handrails, whistle, vacuum pipes and turned brass safety valves* (*where applicable) Highly detailed and decorated cab interior including separately fitted regulator, reverser, handbrake and valve wheels Running gear detailing includes springs, brakes and separately fitted brake gear, sandboxes and sandpipes Glazed cab spectacles Sprung metal buffers Each model supplied with an accessory pack including cab doors, additional bufferbeam pipework, cab steps and screwlink couplings Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in all models for optimum sound reproduction ESU Loksound Micro V5DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Midland Class 1532 (1P) using recordings from real locomotives Details Specific To This Model: Pristine LMS Black Livery Running No. 1295 Belpaire Boiler Standard Side Tanks Welded Side Tanks and Bunker High Cab Front Windows Straight-Sided Bunker with 4-Bar Coal Rails Standard Lamp Irons Deeley 3’ Chimney Rivetted Smokebox Smokebox Door with MR/LMS Style Numberplate Low Smokebox Door Handrail Large Vacuum Exhauster Sandboxes Fitted Between Driving Wheels Running Plate Steps   The Midland Railway Class 1532, alongside a number of similar 0-4-4T designs, formed the backbone of Midland Railway local and light passenger duties for decades, and now the OO scale model of this ornate prototype returns to the Bachmann Branchline range. The LMS embarked on a programme to replace the 1P’s original round-top boilers with Belpaire boilers and No. 1370 is one such locomotive to have undergone this treatment. A miniature marvel, the Branchline model is packed with an impressive level of detail wherever you look. A significant proportion of the 1P is made from diecast metal, with fine engraving and detailing, which is complemented by precision moulded components capturing every aspect of the prototype in high fidelity. Sprung buffers are fitted to each bufferbeam, whilst in the cab, the locomotive controls are faithfully captured and decorated authentically. - Era 3 - OO Scale

Bachmann MR 1532 (1P) Tank 1370 LMS Black - DCC Sound Fitted

MR 1532 (1P) Tank 1370 LMS Black - DCC Sound Fitted Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 142mm (over couplings) Coreless motor Electrical pickup from all wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities Pivoting and sprung rear pony truck Optional wheelset supplied in the accessory pack with traction tyres fitted, to provide increased haulage capacity where required 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate with integral side tank weights Precision moulded plastic boiler, side tanks and cab Separately applied details including lamp irons, push-pull gear*, condensing apparatus*, handrails, whistle, vacuum pipes and turned brass safety valves* (*where applicable) Highly detailed and decorated cab interior including separately fitted regulator, reverser, handbrake and valve wheels Running gear detailing includes springs, brakes and separately fitted brake gear, sandboxes and sandpipes Glazed cab spectacles Sprung metal buffers Each model supplied with an accessory pack including cab doors, additional bufferbeam pipework, cab steps and screwlink couplings Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in all models for optimum sound reproduction ESU Loksound Micro V5DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Midland Class 1532 (1P) using recordings from real locomotives Details Specific To This Model: Pristine LMS Black Livery Running No. 1370 Belpaire Boiler Standard Side Tanks Welded Side Tanks and Bunker High Cab Front Windows Straight-Sided Bunker with 4-Bar Coal Rails Standard Lamp Irons Deeley 3’ Chimney Rivetted Smokebox Smokebox Door with MR/LMS Style Numberplate Low Smokebox Door Handrail Large Vacuum Exhauster Sandboxes Fitted Between Driving Wheels Running Plate Steps   The Midland Railway Class 1532, alongside a number of similar 0-4-4T designs, formed the backbone of Midland Railway local and light passenger duties for decades, and now the OO scale model of this ornate prototype returns to the Bachmann Branchline range. The LMS embarked on a programme to replace the 1P’s original round-top boilers with Belpaire boilers and No. 1370 is one such locomotive to have undergone this treatment. A miniature marvel, the Branchline model is packed with an impressive level of detail wherever you look. A significant proportion of the 1P is made from diecast metal, with fine engraving and detailing, which is complemented by precision moulded components capturing every aspect of the prototype in high fidelity. Sprung buffers are fitted to each bufferbeam, whilst in the cab, the locomotive controls are faithfully captured and decorated authentically. - Era 3 - OO Scale

Bachmann BR Mk1 RMB Restaurant Miniature Buffet BR Maroon SC1839

BR Mk1 RMB Restaurant Miniature Buffet BR Maroon SC1839 Features: Commonwealth Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm The Bachmann Branchline Mk1 Coaches have long been the model of choice for the discerning enthusiast wishing to add the iconic Mk1 Coach to their collection and today, these models continue to provide OO scale modellers with the finest models, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard tension lock coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. - Era 5 - OO Scale

Bachmann BR Mk1 RMB Restaurant Miniature Buffet BR Maroon [PF] SC1839

BR Mk1 RMB Restaurant Miniature Buffet BR Maroon [PF] SC1839 Features: Passenger Fitted Commonwealth Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm The Bachmann Branchline Mk1 Coaches have long been the model of choice for the discerning enthusiast wishing to add the iconic Mk1 Coach to their collection and today, these models continue to provide OO scale modellers with the finest models, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard tension lock coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. - Era 5 - OO Scale

Bachmann BR Mk1 RMB Restaurant Miniature Buffet BR InterCity (Exec) 1848

BR Mk1 RMB Restaurant Miniature Buffet BR InterCity (Executive) 1848 Features: Commonwealth Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm The Bachmann Branchline Mk1 Coaches have long been the model of choice for the discerning enthusiast wishing to add the iconic Mk1 Coach to their collection and today, these models continue to provide OO scale modellers with the finest models, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard tension lock coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. - Era 8 - OO Scale

Bachmann BR Mk1 RMB Restaurant Mini Buffet BR InterCity (Exec) [PF]1848

BR Mk1 RMB Restaurant Miniature Buffet BR InterCity (Executive) [PF] 1848 Features: Passenger Fitted Commonwealth Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm The Bachmann Branchline Mk1 Coaches have long been the model of choice for the discerning enthusiast wishing to add the iconic Mk1 Coach to their collection and today, these models continue to provide OO scale modellers with the finest models, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard tension lock coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. - Era 8 - OO Scale

Bachmann Class 158 2-Car DMU 158856 Central Trains

Class 158 2-Car DMU 158856 Central Trains The Class 158 is one of British Rail’s most successful second generation Diesel Multiple Units (DMUs); first introduced in 1989, the entire fleet remains in traffic to this day. Over the years many colourful liveries have adorned the units, none more so that the vivid green scheme of Central Trains and one such unit is depicted by this Bachmann Branchline model. The pinnacle of OO scale second generation DMUs, the Branchline Class 158 combines high fidelity bodyshells with an underframe that’s adorned with separate components depicting the engines, electrical equipment, and auxiliary gear. It’s the livery application which really brings these models to life and every element has been replicated in miniature. Whilst the main colours are spray painted, the myriad smaller logos, symbols and lettering are applied using a specialist printing process, using BR and corporate specification fonts, logos and colours. Driven by the low-level drive mechanism, which is fitted to each vehicle, the conductive couplings ensure that the two vehicles work together in harmony and enable the use of a single decoder for DCC operation. Fitting that decoder couldn’t be easier thanks to the clip-off underframe panel behind which the decoder socket is fitted and combined with the pre-fitted speaker in each car, it’s easy to fit sound to your model, or why not let us do the work for you by choosing a SOUND FITTED model for a fully immersive operating experience straight out of the box. FEATURES: Pristine Central Trains livery Running No. 158856 Two-Car Unit comprising car Nos. 52856 & 57856 Destination blinds for Leicester Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 610mm - Era 9 - OO Scale