Bachmann LMS 10000 BR Black (Early)

LMS 10000 BR Black (Early) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and this Bachmann Branchline model tells the story of No. 10000 during its time working on the Southern Region. Built by the LMS and so becoming part of the Midland Region’s fleet under BR, after five years in traffic the ‘Twins’ were sent to the Southern Region (SR) between 1953 and 1955 for trails alongside the SR’s own prototype diesels. To work on the SR, additional headcode lights and brackets were fitted to suit the Southern 6 position headcode system as displayed on this model of No. 10000, which is depicted in its striking black and silver livery with early emblems. The Bachmann Branchline model is a highly detailed replica of the pioneering prototype, adorned with numerous separately fitted components to accurately capture the appearance of this iconic machine. The livery application captures the splendour of this elegant locomotive, whilst engine room detailing has been replicated through the bodyside windows for the first time. Inside, the proven combination of a five pole motor and twin flywheels, driving both bogies and with all-wheel drive will provide enough power for any prototypical train. Smooth running is assured thanks to the use of separate metal bearings on each axle. The 21 Pin DCC decoder socket makes it easy to equip this model for DCC use, and there’s space for a speaker to be fitted if you wish to add sound. Details: Pristine BR Black & Silver Early Emblem livery Running No. 10000 Six Headcode Lights & Brackets at each end Bodysides Steps Water Scoops Fitted Features: Powerful 5 Pole Motor NEM Coupling Pockets Directional Lighting Chassis mounted switches allow tail lights to be turned off and provide a choice between Passenger or Freight headcode light configurations Cab Lighting Detailed Cab Interior with pre-fitted crew in one cab Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 254mm (over couplings) - OO Scale

Bachmann LMS 10001 BR Lined Green (Late Crest)

LMS 10001 BR Lined Green (Late Crest) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and this Bachmann Branchline model pays homage to the youngest of the pair, 10001. Built by the LMS and so becoming part of the Midland Region’s fleet under BR, after five years in traffic the ‘Twins’ were sent to the Southern Region (SR) between 1953 and 1955 for trails alongside the SR’s own prototype diesels. To work on the SR, additional headcode lights and brackets were fitted to suit the Southern 6 position headcode system and these remained a feature of both locomotives thereafter, as displayed on this model of No. 10001 which is depicted in BR Green livery and with the late crests that were applied by BR from 1956. By this time the pair had returned to the Midland Region and were employed on duties across the region. The Bachmann Branchline model of No. 10001 is a highly detailed replica of the prototype, adorned with numerous separately fitted components to accurately capture the appearance of this pioneering machine. The livery application captures the splendour of this elegant locomotive, whilst engine room detailing has been replicated through the bodyside windows for the first time. Inside, the proven combination of a five pole motor and twin flywheels, driving both bogies and with all-wheel drive will provide enough power for any prototypical train. Smooth running is assured thanks to the use of separate metal bearings on each axle. The 21 Pin DCC decoder socket makes it easy to equip this model for DCC use, and there’s space for a speaker to be fitted if you wish to add sound. Details: Pristine BR Lined Green Late Crest livery Running No. 10001 Six Headcode Lights & Brackets at each end Smooth Bodysides (No Steps) Water Scoops Fitted Features: Powerful 5 Pole Motor NEM Coupling Pockets Directional Lighting Chassis mounted switches allow tail lights to be turned off and provide a choice between Passenger or Freight headcode light configurations Cab Lighting Detailed Cab Interior with pre-fitted crew in one cab Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 254mm (over couplings) - OO Scale

Bachmann MR 3835 (4F) w/ Fowler Tender 43892 BR Black

MR 3835 (4F) w/ Fowler Tender 43892 BR Black The 4Fs were simple yet beautiful machines and the Branchline model pays homage to that with high fidelity mouldings for the main components like the smokebox, boiler, firebox and cab, which are all mounted on a diecast metal running plate. Countless separate detailing parts are then added like the metal handrails, turned brass safety valves, lamp irons and lubricators. Sprung metal buffers are fitted to both bufferbeams. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. This attention to detail extends to the tender, while the tender drawbar is adjustable to suit individual layout conditions and electrical connections are incorporated into the drawbar. Look inside the cab and you will find a sublime level of detail; the boiler backhead boasts an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. A poseable fallplate is fitted to the rear of the cab to complete the look. The Branchline 4F runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine BR Black ‘British Railways’ livery Running No. 43892 Fowler Tender with Water Pickup Gear Short Chimney Ross Pop Safety Valves Fluted Connecting Rods Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 221mm (over couplings) OO Scale 

Bachmann MR 3835 (4F) w/ Fowler Tender 43982 BR Black (Late)

MR 3835 (4F) w/ Fowler Tender 43982 BR Black (Late) The 4Fs were simple yet beautiful machines and the Branchline model pays homage to that with high fidelity mouldings for the main components like the smokebox, boiler, firebox and cab, which are all mounted on a diecast metal running plate. Countless separate detailing parts are then added like the metal handrails, turned brass safety valves, lamp irons and lubricators. Sprung metal buffers are fitted to both bufferbeams. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. This attention to detail extends to the tender, while the tender drawbar is adjustable to suit individual layout conditions and electrical connections are incorporated into the drawbar. Look inside the cab and you will find a sublime level of detail; the boiler backhead boasts an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. A poseable fallplate is fitted to the rear of the cab to complete the look. The Branchline 4F runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine BR Black Late Crest livery Running No. 43982 Fowler Tender with Water Pickup Gear Short Chimney Ross Pop Safety Valves Fluted Connecting Rods Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 221mm (over couplings) OO Scale 

Bachmann LMS 5XP 'Patriot' 45524 'Blackpool' BR Lined Green (Early)

LMS 5XP 'Patriot' 45524 'Blackpool' BR Lined Green (Early) Add some LMS express power to your locomotive line up with the Bachmann Branchline LMS Patriot. The LMS built 52 of these locomotives for express passenger duties and named more than a dozen after the holiday resorts that it served. We’ve selected one of the most famous destinations of them all – Blackpool – as the subject for this Branchline OO scale model. Boasting a high level of detail, the Branchline Patriot is constructed with a diecast metal running plate paired with a precision moulded boiler, firebox and cab capturing the loco’s distinctive appearance, most notably the parallel boiler and Fowler-designed cab. Etched metal smoke deflectors are then added, along with countless separate detailing parts like the metal handrails, turned brass safety valves, lamp irons and lubricators. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. Moving to the tender and the locomotive to tender drawbar is adjustable to suit individual layout conditions, whilst electrical connections are incorporated into the drawbar and a poseable fallplate is fitted to the tender, which itself is another precision moulded part, with several separately applied details including the lamp irons, tank vents, coal rails and handwheels. A realistic coal load is included whilst the tender chassis sports brake rigging and water pick-up gear. Sprung metal buffers are fitted to both the front of the locomotive and the rear of the tender. Within the cab, a detailed boiler backhead is present and the pipework and controls are enhanced with individual decoration. The ventilator on the cab roof is a separate part, allowing it to be posed in the open or closed position, or somewhere in between. The high level of decoration is not reserved only for the cab interior of course, and the model boasts an authentic rendition of the BR Lined Green livery complete with full-colour early emblems. The beautifully crafted livery application is finished with precision printed details like the running number, shed code and builders plaques, whilst etched nameplates are supplied for user-fitting to complete the look of this express locomotive. With a powerful three pole motor and a proven drive train, the Branchline Patriot is a surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Meanwhile, DCC provision comes in the form of a 21 Pin decoder socket and it’s easy to fit a speaker if you’re adding sound. Detail: Pristine BR Lined Green Early Emblem livery Running No. 45524 Named ‘Blackpool’ Etched Nameplates included Riveted Fowler Tender Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 260mm (over couplings) - OO Scale

Bachmann LMS 5XP 'Patriot' 5551 'The Unknown Warrior' LMS Lined Crimson

LMS 5XP 'Patriot' 5551 'The Unknown Warrior' LMS Lined Crimson Add some LMS express power to your locomotive line up with the Bachmann Branchline LMS Patriot. The LMS built 52 of these locomotives for express passenger duties but sadly none were preserved, however The LMS Patriot Project was launched in 2008 to build a replica Patriot Class locomotive to represent this long-lost class and create a national memorial engine, recognising the role that class leader No. 5500 performed for the LMS from 1937. Bachmann is proud to support The LMS Patriot Project and by producing this model of ‘the Unknown Warrior’ we will be helping towards the completion of its full size counterpart. Boasting a high level of detail, the Branchline Patriot is constructed with a diecast metal running plate paired with a precision moulded boiler, firebox and cab capturing the loco’s distinctive appearance, most notably the parallel boiler and Fowler-designed cab. Etched metal smoke deflectors are then added, along with countless separate detailing parts like the metal handrails, turned brass safety valves, lamp irons and lubricators. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. Moving to the tender and the locomotive to tender drawbar is adjustable to suit individual layout conditions, whilst electrical connections are incorporated into the drawbar and a poseable fallplate is fitted to the tender, which itself is another precision moulded part, with several separately applied details including the lamp irons, tank vents, coal rails and handwheels. A realistic coal load is included whilst the tender chassis sports brake rigging and water pick-up gear. Sprung metal buffers are fitted to both the front of the locomotive and the rear of the tender. Within the cab, a detailed boiler backhead is present and the pipework and controls are enhanced with individual decoration. The ventilator on the cab roof is a separate part, allowing it to be posed in the open or closed position, or somewhere in between. The high level of decoration is not reserved only for the cab interior of course, and the model boasts an authentic rendition of the BR Lined Green livery complete with full-colour early emblems. The beautifully crafted livery application is finished with precision printed details like the running number, shed code and builders plaques, whilst etched nameplates are supplied for user-fitting to complete the look of this express locomotive. With a powerful three pole motor and a proven drive train, the Branchline Patriot is a surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Meanwhile, DCC provision comes in the form of a 21 Pin decoder socket and it’s easy to fit a speaker if you’re adding sound. Detail: Pristine LMS Lined Crimson Lake livery Running No. 5551 Named ‘The Unknown Warrior’ Etched Nameplates included Riveted Fowler Tender Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 260mm (over couplings) - OO Scale