Hornby HM7000: 6 BLE Decoder 6 Pin w/ Fine Wire (No Sound)

HM7000: 6 BLE Decoder 6 Pin w/ Fine Wire (No Sound) Part of the innovative HM7000 range, this new 6-pin Bluetooth® and DCC decoder is designed to get smaller locomotives working on the HM7000 system. The 6-pin connectors are located on the end of flexible wires, giving you more flexibility when installing the decoder in models with limited space. The decoder is designed to supply 1000mA continuous load to the main motor and a peak demand of 1500mA, making it highly suitable for most N scale locos and small TT, HO and OO locomotives. An R7377 Power Bank can be purchased separately and added to this decoder. We recommend for ease you do this during the first install. The Power Bank will keep the loco operating during short power outages when running over dirty track or complex points.

Hornby HM7000: Power Bank Maxi

HM7000: Power Bank Maxi The R7416 Power Bank Maxi is our largest power bank and will keep locomotives with larger motors that require more pulling power, running over any potential dead spots. The space require inside a locomotive for this power bank is 22 x 12 x 10mm.  The Power Bank Maxi can be connected into the current range of HM7000 DCC Bluetooth decoders. A simple plug & play socket means there's no soldering required! Why use one? Your layout will occasionally suffer from dirty track or small electrical dead spots at points and crossings. The small loss of power can cause locomotives to stop, but with DCC Sound Decoders it can also cause the sounds to reset and restart. Avoid both issues by fitting a Power Bank. Perfect locomotive running and optimal control! (The Power Bank is not suitable for use without an HM7000 decoder, connecting it directly to other decoders or directly to the wiring of a model locomotive may cause damage to the Power Bank, your locomotive or your non-HM7000 decoder). For small locomotives we have a smaller Power Bank available R7377 Power Bank

Hornby RailRoad: Class 73 73235 Intercity Swallow

RailRoad: Class 73 73235 Intercity Swallow The Railroad Class 73 is the perfect mixed traffic locomotive and is ideally suited for both use on InterCity services and short freight workings across Southern England. Decorated in the colourful tri-colour scheme of BR InterCity Swallow, 73235 would be a small but mighty addition to your model railway collection. Model specification: Railroad specification Class 73 model Durable bodyshell Reliable motor for continued and long-lasting use Accurate livery application Electronics: 21-pin DCC decoder socket compatible with HM7000 system Livery: BR InterCity Swallow Headcodes displaying ‘20’ at one end and red markers at the other - OO Scale

Hornby RailRoad: Class 73 73235 Intercity Swallow (Sound Fitted)

RailRoad: Class 73 73235 Intercity Swallow (Sound Fitted) The Railroad Class 73 is the perfect mixed traffic locomotive and is ideally suited for both use on InterCity services and short freight workings across Southern England. Decorated in the colourful tri-colour scheme of BR InterCity Swallow, 73235 would be a small but mighty addition to your model railway collection.  This model is fitted with a TXS sound decoder for added realism when running on DCC layouts. Model specification: Railroad specification Class 73 model Durable bodyshell Reliable motor for continued and long-lasting use Accurate livery application Electronics: 21-pin DCC Sound decoder fitted compatible with HM7000 system Realistic sound profile based on recordings of Class 73 locomotives Livery: BR InterCity Swallow Headcodes displaying ‘20’ at one end and red markers at the other - OO Scale

Hornby RailRoad: Class 800 Great British Railways Train Pack

RailRoad: Class 800 Great British Railways Train Pack Utilising the popular Railroad Class 800 tooling, we are thrilled to present a vision of the future: an Azuma in Great British Railways livery! Based on official documentation of what passenger trains will look like under GBR, this Class 800 train pack consisting of a driving car and dummy car makes for a striking addition to your train set or model railway! Model Specification: Railroad specification Class 800 model Durable bodyshell Reliable motor for continued and long-lasting use Directional Lighting DCC Ready Matches induvial passenger coaches R40570/R40571/R40572 Electronics: 21-pin DCC decoder socket compatible with HM7000 system Compatible with R7322 HM7000-21TXS Sound Decoder and speaker Space for HM7070 power bank for uninterrupted running Livery: Great British Railways - OO Scale  

Hornby RailRoad: Peppercorn A1 60163 'Tornado' BR Lined Apple Green

RailRoad: Peppercorn A1 60163 'Tornado' BR Lined Apple Green Peppercorn A1 60163 ‘Tornado’, a true icon of the current railway scene, rejoins the RailRoad range in a new livery scheme: Apple Green with British Railway tender lettering. Designed to be robust this RailRoad model features fully working piston and connecting rods, accurate paint application and DCC capability. Model Specification: RailRoad specification Peppercorn A1 Moulded details Working running gear NEM coupling sockets Accessory Pack Minimum 2nd Radius Electronics: 21-pin DCC decoder socket compatible with HM7000 system Livery: British Railways lined apple green Modern warning flashes - OO Scale  

Hornby RailRoad: Peppercorn A1 60163 ‘Tornado’ BR Apple Green (Sound)

RailRoad: Peppercorn A1 60163 ‘Tornado’ BR Lined Apple Green (Sound Fitted) Peppercorn A1 60163 ‘Tornado’, a true icon of the current railway scene, rejoins the RailRoad range in a new livery scheme: Apple Green with British Railway tender lettering. Designed to be robust this RailRoad model features fully working piston and connecting rods, accurate paint application and DCC capability. Model Specification: RailRoad specification Peppercorn A1 Moulded details Working running gear NEM coupling sockets Accessory Pack Minimum 2nd Radius DCC Sound: Pre fitted 21-pin DCC Sound decoder, compatible with HMRA compliant systems and HM7000 High fidelity sound profile assembled from recordings of 60163 Tornado Livery: British Railways lined apple green Modern warning flashes - OO Scale  

Hornby Robert Stephenson’s L&MR ‘Planet’

Robert Stephenson’s L&MR ‘Planet’ Building on the success of our other Era 1 steam locomotives, ‘Planet’ is an impeccable replication of the historic Stephenson design, utilising high quality diecast and plastic mouldings to capture the distinctive shape of the locomotive. Initially available in its preserved condition, this wonderful model will be a great addition to any model railway collection. Model Specification: High detail model of replica L&MR Planet locomotive based on extensive research Diecast locomotive chassis and tender body Coreless motor All-wheel pick up High detail cab backhead Decorated crew figures Separate buffers Numerous separately fitted parts such as steam pipes, control levers, strengthening truss rods, and handrails Accessory Bag Minimum 2nd radius Electronics: Next18 DCC decoder socket compatible with HM7000 system Livery: As preserved in the Manchester Science Museum Wood grain printing on boiler Gold plated dome and boiler details - OO Scale

Hornby RailRoad: GWR County 1023 'County of Oxford' GW Lined Green

RailRoad: GWR County 1023 'County of Oxford' GW Lined Green The ‘County’ Class was the last of the GWR-designed two-cylinder 4-6-0s, with 30 built at Swindon between 1945 and 1947 to the design of Chief Mechanical Engineer, Frederick Hawksworth. This latest RailRoad County Class model depicts No. 1023 ‘County of Oxford’ in Great Western lined green. Model specification: RailRoad specification model of County Class Moulded details Working running gear NEM coupling sockets Accessory Pack Minimum 2nd Radius Electronics: 21-pin DCC Decoder socket compatible with HM7000 Livery: Great Western lined green with GW tender crest Accurate colours and font - OO Scale

Hornby Merchant Navy 35028 'Clan Line' BR Green (Early) (Sound/Smoke)

Merchant Navy 35028 'Clan Line' BR Green (Early) (Sound/Smoke) This highly detailed model represents famed 'Spam Can' No.35028 ‘Clan Line’ in British Railways lined green livery with early cycling lion emblem on the tender. A must-have model for Southern Region collectors, this feature-packed locomotive is pre-fitted with HM7000 control, for the most satisfying model railway experience yet. Please Note: This model requires a DCC controller or the HM7000 App to control. Model Specification: High detail OO gauge model based on extensive research and original works drawings Die-cast chassis, pony truck and trailing truck Die-cast connecting rods and valve gear High detail cab and fully decorated backhead with decorated instrument dials Large number of separately fitted parts Separately fitted simulated coal load with fully detailed tender bunker Powerful 5 pole skew wound motor Electrical pickups on main drive wheels and tender wheels 8-way locomotive to tender drawbar, with integrated electrical connection for easy coupling and decoupling Pogo pin wheel pickup arrangement for easy pickup servicing Brass main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Accessory bag contains tablet catcher, vacuum pipes, lamps and couplings Minimum 2nd Radius curves Steam Generator: Pre-fitted Gen 2 steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Water reservoir large enough for 20 minutes of continuous steam running Adjustable steam output settings via the decoder Electronics: Pre-fitted 21-Pin HM7000 decoder and speaker. Compatible with NMRA DCC controllers and HM7000 system HM7000 Power Bank compatible DCC Sound: Pre-installed Merchant Navy sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect. Assembled using live recordings of Merchant Navy locomotives Tender speaker Livery: BR Lined Green with ‘Cycling Lion’ early emblem on tender Clan Line etched nameplates Semi-gloss finish Accurate colours and fonts - OO Scale

Hornby LNER A4 60002 ‘Sir Murrough Wilson' BR Green (Sound/Smoke)

LNER A4 60002 ‘Sir Murrough Wilson' BR Green (Sound/Smoke) The famous LNER A4 pacific, known for its streamlined casing, returns to the range as No. 60002 ‘Sir Murrough Wilson’ fitted with steam generator and DCC Sound functionality, as well as working lights and tender lights. This gorgeous Gresley locomotive is highly detailed, featuring a great number of intricate separate parts, and would make for a standout addition to any early British Railways model railway collection. Please Note: This model requires a DCC controller or the HM7000 App to control. Model Specification: High detail OO gauge model based on extensive research and original works drawings Die-cast chassis and boiler Die-cast connecting rods and valve gear High detail cab and fully decorated back head with decorated instrument dials Decorated crew figures Turned brass safety valves Large number of separately fitted parts Separately fitted simulated coal load with fully detailed tender bunker Powerful 5 pole skew wound motor Electrical pickups on main drive wheels and tender wheels Quick release locomotive to tender connector Pogo pin wheel pickup arrangement for easy pickup servicing Brass main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Working lights  Working Tender Lights Accessory bag contains tablet catcher, vacuum pipes, lamps and couplings Minimum 2nd Radius curves Steam Generator: Pre-fitted Gen 2 steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Water reservoir large enough for 20 minutes of continuous steam running Adjustable steam output settings via the decoder Electronics: Pre-fitted 21-Pin HM7000 decoder and speaker. Compatible with NMRA DCC controllers and HM7000 system HM7000 Power Bank compatible Flickering firebox DCC Sound: Pre-installed LNER A4 sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect. Assembled using live recordings of LNER A4 locomotives Tender speaker Tooling: Smokebox door numberplate Single Chimney Non-Corridor Tender Side valence removed Livery: BR Lined Green Named ‘Sir Murrough Wilson’ Cycling Lion on tender Accurate colours and fonts - OO Scale

Hornby LNER A4 60024 'Kingfisher' BR Exp. Ultramarine (Sound/Smoke)

LNER A4 60024 'Kingfisher' BR Experimental Ultramarine (Sound/Smoke) The famous LNER A4 pacific, known for its streamlined casing, returns to the range as No. 60024 ‘Kingfisher’ fitted with steam generator and DCC Sound functionality, as well as working lights and tender lights.  This gorgeous Gresley locomotive is highly detailed, featuring a great number of intricate separate parts, and would make for a standout addition to any LNER model railway collection. Please Note: This model requires a DCC controller or the HM7000 App to control. Model Specification: High detail OO gauge model based on extensive research and original works drawings Die-cast chassis and boiler Die-cast connecting rods and valve gear High detail cab and fully decorated back head with decorated instrument dials Decorated crew figures Turned brass safety valves Large number of separately fitted parts Separately fitted simulated coal load with fully detailed tender bunker Powerful 5 pole skew wound motor Electrical pickups on main drive wheels and tender wheels Quick release locomotive to tender connector Pogo pin wheel pickup arrangement for easy pickup servicing Brass main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Working lights  Working Tender Lights Accessory bag contains tablet catcher, vacuum pipes, lamps and couplings Minimum 2nd Radius curves Steam Generator: Pre-fitted Gen 2 steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Water reservoir large enough for 20 minutes of continuous steam running Adjustable steam output settings via the decoder Electronics: Pre-fitted 21-Pin HM7000 decoder and speaker. Compatible with NMRA DCC controllers and HM7000 system HM7000 Power Bank compatible Flickering firebox DCC Sound: Pre-installed LNER A4 sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect. Assembled using live recordings of LNER A4 locomotives Tender speaker Tooling: Smokebox door numberplate Single Chimney Corridor Tender Side valence removed Livery: BR Express Blue Named ‘Kingfisher’ British Railways lettering on tender Accurate colours and fonts - OO Scale

Hornby GWR Saint 2945 'Hillingdon Court' GWR Lined Green

GWR Saint 2945 'Hillingdon Court' GWR Lined Green We are delighted to present the next run of OO Gauge GWR Saint Class locomotives in this months range launch, with this particular example being No. 2945 ‘Hillingdon Court’ in Great Western lined green. Utilising the same highly acclaimed tooling used on the first run of Saints last year, this latest release takes the model one step further by the inclusion of a revised cab footplate for improved running, as well as being DCC ready via a 21-pin decoder socket, perfect for the HM7000 system. Model Specification: High detail OO Gauge model based on extensive research and original works drawings Die-cast Chassis and Running Plate. Model Weight is 341 grams High detail cab and fully decorated backhead with decorated instrument dials Etched metal nameplates Powerful 5 Pole Skew wound motor Quick release locomotive to tender connector Pogo pin wheel pickup arrangement for easy pickup servicing Electrical pickups on main drive wheels and tender wheels Die-cast Piston Rods & valve gear Fully decorated crew figures Prototypical size metal handrails with brass stanchions Brass main drive bearings Sprung metal buffers Front and Rear NEM coupling pocket Separately fitted lamps. Lamp code can be changed Separately fitted simulated coal load Improved cab footplate design Electronics: HM7000 21-Pin DCC decoder compatible HM7000 Power Bank compatible Illuminated flickering firebox Tooling: Tall Chimney Safety valve with top feeds Later curved footplate Fluted piston rods Early boiler Churchward tender Livery: GWR Lined Green Great Western tender lettering Accurate colours and fonts - OO Scale

Hornby GWR Saint 2980 'Coeur de Lion' GWR Lined Green (Sound/Smoke)

GWR Saint 2980 'Coeur de Lion' GWR Lined Green (Sound/Smoke) We are delighted to present the next run of OO Gauge GWR Saint Class locomotives in this months range launch, with this particular example being No. 2980 ‘Coeur de Lion’ in Great Western lined green. Utilising the same highly acclaimed tooling used on the first run of Saints last year, this latest release takes the model one step further by the inclusion of a DCC Sound decoder and speaker, 2nd generation steam generator, and revised cab footplate for improved running. Model Specification: High detail OO Gauge model based on extensive research and original works drawings Die-cast Chassis and Running Plate. Model Weight is 341 grams High detail cab and fully decorated backhead with decorated instrument dials Etched metal nameplates Powerful 5 Pole Skew wound motor Quick release locomotive to tender connector Pogo pin wheel pickup arrangement for easy pickup servicing Electrical pickups on main drive wheels and tender wheels Die-cast Piston Rods & valve gear Fully decorated crew figures Prototypical size metal handrails with brass stanchions Brass main drive bearings Sprung metal buffers Front and Rear NEM coupling pocket Separately fitted lamps. Lamp code can be changed Separately fitted simulated coal load Improved cab footplate design Steam Generator: Pre-fitted Gen 2 steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Water reservoir large enough for 20 minutes of continuous steam running Adjustable steam output settings via the decoder Electronics: 21-Pin DCC Sound decoder pre-fitted HM7000 Power Bank compatible Illuminated flickering firebox DCC Sound: Pre-installed Saint Class sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect. Assembled using live recordings of Saint Class locomotives Tender speaker Tooling: Tall Chimney Later safety valve with Top Feeds Later curved footplate Fluted piston rods Superheated boiler Collett Tender Livery: GWR Lined Green Great Western tender lettering Accurate colours and fonts - OO Scale

Hornby GNR J13 1252 GNR Plain Grey (Sound Fitted)

GNR J13 1252 GNR Plain Grey (Sound Fitted) The Hornby GNR J13/J52 returns for 2026 in the standout GNR grey livery of the early 1900s, numbered 1252. Model Specification: Highly detailed OO gauge model based on extensive research and original works drawings Die-cast boiler, chassis and running plate. Model weight is 235 grams Highly detailed cab and fully decorated backhead with decorated instrument dials Pogo pin wheel pick-up arrangement for easy pick-up servicing Die-cast connecting rods Prototypical size metal handrails with brass stanchions Oilite main drive bearings Opening cab roof vent Sprung metal buffers Front and rear NEM coupling pocket. Rear coupling pocket has a close coupling mechanism Wheel pick-ups on all wheels Accessory bag contains vacuum pipes, lamps and couplings Separately fitted lamps (lamp code can be changed) Separately fitted simulated coal load. DCC Sound: HM7000 21-pin sound decoder fitted High fidelity sound profile of J13/J52 Electronics: Decoder-controlled firebox flicker HM7000 Power Bank compatible Powerful 5-pole skew-wound motor Tooling: Raised Safari cab roof ventilator Double footstep arrangement Coal bunker with coal rails Flush-faced connecting rods Brass Ramsbottom safety valves 3’ 3” built-up chimney GNR tapered buffer stocks Livery: GNR Plain Grey Semi-gloss with matt smokebox Accurate colours and typefaces - OO Scale

Hornby GNR J13 1252 GNR Plain Grey

GNR J13 1252 GNR Plain Grey The Hornby GNR J13/J52 returns for 2026 in the standout GNR grey livery of the early 1900s, numbered 1252. Model Specification: Highly detailed OO gauge model based on extensive research and original works drawings Die-cast boiler, chassis and running plate. Model weight is 235 grams Highly detailed cab and fully decorated backhead with decorated instrument dials Pogo pin wheel pick-up arrangement for easy pick-up servicing Die-cast connecting rods Prototypical size metal handrails with brass stanchions Oilite main drive bearings Opening cab roof vent Sprung metal buffers Front and rear NEM coupling pocket. Rear coupling pocket has a close coupling mechanism Wheel pick-ups on all wheels Accessory bag contains vacuum pipes, lamps and couplings Separately fitted lamps (lamp code can be changed) Separately fitted simulated coal load. Electronics: Decoder-controlled firebox flicker (decoder sold separately) HM7000 21-pin sound decoder compatible HM7000 Power Bank compatible Powerful 5-pole skew-wound motor Tooling: Raised Safari cab roof ventilator Double footstep arrangement Coal bunker with coal rails Flush-faced connecting rods Brass Ramsbottom safety valves 3’ 3” built-up chimney GNR tapered buffer stocks Livery: GNR Plain Grey Semi-gloss with matt smokebox Accurate colours and typefaces - OO Scale

Hornby Dublo: Merchant Navy 35019 'French Line CGT' BR Express Blue

Dublo: Merchant Navy 35019 'French Line CGT' BR Express Blue A further addition to the highly collectable Hornby Dublo range comes in the form of Merchant Navy No. 35019 ‘French Line CGT’, in the vibrant express blue colour scheme of early British Railways. Moulded out of diecast, this high-fidelity model of a classic Bulleid ‘Spam Can’ is the ideal locomotive for collectors of Southern Region stock and Dublo Diecast models. Model Specification: High detail OO gauge model based on extensive research and original works drawings Fully moulded in Diecast Diecast connecting rods and valve gear Accessory ‘RF’ Headboard High detail cab and fully decorated backhead with decorated instrument dials Large number of separately fitted parts Separately fitted simulated coal load with fully detailed tender bunker Powerful 5 pole skew wound motor Electrical pickups on main drive wheels and tender wheels 8-way locomotive to tender drawbar, with integrated electrical connection for easy coupling and decoupling. Pogo pin wheel pickup arrangement for easy pickup servicing Brass main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Accessory bag Minimum 2nd Radius curves Electronics: 21-Pin HM7000 decoder socket compatible with HM7000 system HM7000 Power Bank compatible Livery: BR Lined Express Blue with ‘Cycling Lion’ early emblem on tender French Line CGT etched nameplates Semi-gloss finish Accurate colours and fonts - OO Scale

Hornby A1X 'Terrier' 643 LB&SCR Marsh Brown

A1X 'Terrier' 643 LB&SCR Marsh Brown The famous LB&SCR A1/A1X 0-6-0 Terrier is back for the 2026 range launch, utilising the highly accurate OO Gauge tooling suite that expertly captures the charming characteristics of the southern steam engine. It has been designed for smooth and reliable operation, including the provision for digital command control via a 6-pin decoder socket. This particular example depicts No.643 in London Brighton & South Coast Railway Marsh Brown. Model Specification: Expertly moulded die-cast body and chassis for added realism and weight Number of separately fitted parts, including smokebox door, water filler caps, handrails, lamp irons and buffers Brass connector rods with metal securing pins Detailed cab interior with painted instrument dials Pivoting NEM sockets for improved coupling around tight curves Precision-engineered coreless motor for smooth running All-wheel pick-ups Accessory pack minimum 2nd radius Electronics: 6-Pin DCC Decoder socket compatible with HM7000 system Tooling: Stroudley chimney Flush smokebox door Four lamp brackets on front and rear Low bufferstock with no lamp brackets Steam pipes Small cab bunker with no coal rails Westinghouse pump Livery: LB&SCR Marsh Brown Accurate colours and typefaces - OO Scale

Hornby A1X 'Terrier' 72 'Fenchurch' Newhaven Harbour Company

A1X 'Terrier' 72 'Fenchurch' Newhaven Harbour Company The famous LB&SCR A1/A1X 0-6-0 Terrier is back for the 2026 range launch, utilising the highly accurate OO Gauge tooling suite that expertly captures the charming characteristics of the southern steam engine. It has been designed for smooth and reliable operation, including the provision for digital command control via a 6-pin decoder socket. This particular example depicts No.72 ‘Fenchurch’ in Newhaven Harbour Company lined black. Model Specification: Expertly moulded die-cast body and chassis for added realism and weight Number of separately fitted parts, including smokebox door, water filler caps, handrails, lamp irons and buffers Brass connector rods with metal securing pins Detailed cab interior with painted instrument dials Pivoting NEM sockets for improved coupling around tight curves Precision-engineered coreless motor for smooth running All-wheel pick-ups Accessory pack Minimum 2nd radius Electronics: 6-Pin DCC Decoder socket compatible with HM7000 system Tooling: Stroudley chimney Rivetted smokebox door Six lamp brackets on front and rear  Low bufferstock with lamp brackets Steam pipes removed Small cab bunker with no coal rails Westinghouse pump Livery: Newhaven Harbour Company lined black Accurate colours and typefaces - OO Scale

Hornby Pullman Brake Parlour Third 'Car No.209' (TT)

Pullman Brake Parlour Third 'Car No.209'  Capture the elegance of luxury train travel with the K-Type Pullman Cars in TT:120, with crisp moulded bodyshells, detailed interiors and working table lamps.  This new offering of 3rd Class Brake numbered 209 is perfect for pairing with previous runs of Pullman coaches, and could easily run behind a 1940s steam locomotive, or a modern Class 50 or 66 on a charter train! Model Specification: Highly detailed model of 3rd Class Brake Defined bogie mouldings with rivet detailing Detailed underframe Moulded interior Kinematic NEM coupling mechanism Accessory Pack Electronics: Working table lamps on analogue or DCC. Livery: Lined Pullman cream and brown Grey roof Printed ‘Car No.209 Third Class’ running number Semi-gloss finish - TT:120 Scale

Hornby Pullman Kitchen Parlour First 'Fingall' (TT)

Kitchen Parlour First 'Fingall' Capture the elegance of luxury train travel with the K-Type Pullman Cars in TT:120, with crisp moulded bodyshells, detailed interiors and working table lamps. This new offering of 1st Class Kitchen named ‘Fingall’ is perfect for pairing with previous runs of Pullman coaches, and could easily run behind a 1940s steam locomotive, or a modern Class 50 or 66 on a charter train. Model Specification: Highly detailed model of 1st Class Kitchen Car Defined bogie mouldings with rivet detailing Detailed underframe Moulded interior Kinematic NEM coupling mechanism Accessory Pack Electronics: Working table lamps on analogue or DCC. Livery: Lined Pullman cream and brown Grey roof ‘Fingall’ painted names Semi-gloss finish - TT:120 Scale

Hornby BR Class 50 D403 BR Blue (TT)

BR Class 50 D403 BR Blue  The latest 'Hoover' to the TT:120 range is the BR Class D403. Featuring a five-pole motor, directional and cab lighting, die-cast chassis and highly detailed bodyshell, the illustrious Class 50 will make an mpressive addition to your TT:120 fleet. This model depicts pre-TOPS numbered D403 in all-over BR Blue with small cab side BR Double Arrows and headcode panels. Model Specification: Highly detailed model based on extensive research including 3D scanning and original works drawings Heavy die-cast chassis and underframe, giving an overall weight of 195g Powerful five-pole skew-wound motor with dual flywheels Dual bogie drive with a total of 12 driving wheels Brass axle bearings All wheel electrical pickup Front and rear kinematic NEM coupling system Die-cast metal buffers Separately fitted metal steps, grills and handrails Accessory bag contains optional fit snow ploughs, vacuum pipes and couplings Electronics: Directional lighting Cab interior lighting (requires DCC to operate) Separately controllable taillights (requires DCC to operate) Next-18 Decoder socket compatible with HM7000 system Space for HM7000-N18TXS Sound Decoder to be fitted Space for HM7070 Power Bank for uninterrupted running Tooling: Original headcode box Original boiler port Flush nose ends Livery: BR Blue with cab side double arrows Pre-Tops number Unnamed - TT:120 Scale

Hornby BR Class 50 50026 'Indomitable' BR Large Logo (TT)

BR Class 50 50026 'Indomitable' BR Large Logo Here comes another 'Hoover'! BR Class 50 50026 'Indomitable' features a five-pole motor, directional and cab lighting, die-cast chassis and highly detailed bodyshell, making an imposing addition to your TT:120 fleet. This illustrious model depicts TOPS numbered 50026 ‘Indomitable’ in BR Blue with large double arrow logos, plated headcode panels and high intensity light. Model Specification: Highly detailed model based on extensive research including 3D scanning and original works drawings Heavy die-cast chassis and underframe, giving an overall weight of 195g Powerful five-pole skew-wound motor with dual flywheels Dual bogie drive with a total of 12 driving wheels Brass axle bearings All wheel electrical pickup Front and rear kinematic NEM coupling system Die-cast metal buffers Separately fitted metal steps, grills and handrails Accessory bag contains optional fit snow ploughs, vacuum pipes and couplings Electronics: Directional lighting Cab interior lighting (requires DCC to operate) Separately controllable taillights (requires DCC to operate) Next-18 Decoder socket compatible with HM7000 system Space for HM7000-N18TXS Sound Decoder to be fitted Space for HM7070 Power Bank for uninterrupted running Tooling: Plated headcode box with marker lights fitted Plated boiler port High intensity light fitted in nose ends Livery: BR Blue with large double arrows Grey roof Indomitable name plates - TT:120 Scale

Hornby BR Class 37 37413 'Loch Eil Outward Bound' Transrail (TT)

BR Class 37 37413 'Loch Eil Outward Bound' Transrail Introducing Transrail Class 37 'Loch Eil Outward Bound' 37413, including all the same great features presented on the English Electric Class 37 model releases late last year, such as working lights, weighty die-cast chassis, and optional bodyshells depending on subclass. The ‘Tractor’ is a must have for any TT:120 layout, with this model representing No.37413 ‘Loch Eil Outward Bound’ in Transrail Triple Grey Livery, complete with Transrail company logos. Model Specification: Highly detailed model based on extensive research and design, including historical drawings and laser scans Die-cast chassis and underframe giving the mode a weight of 170g Assortment of separately fitted parts, including lamp brackets, speedometer, sandpipes, and roof horns Etched metal roof grille Detailed cab interior Powerful five-pole motor with dual flywheels providing power to all wheels Electrical pick-ups on all wheels Brass axle bearings Pivoting NEM coupling sockets Accessory pack that includes body removal tool, optional snowplough and bufferbeam pipes Minimum 2nd radius curves Electronics: Working directional and cab lights, including Day/Night mode (please note some functionality will only work on DCC) Next18 DCC Decoder socket compatible with HM7000 system Decoder socket housed underneath clip-on body Space for HM7000-N18TXS Sound Decoder to be fitted Space for HM7070 Power Bank for uninterrupted running Tooling: Class 37/4 Plated headcodes High intensity lights Nose-mounted ETH Oval buffers Plated roof boiler plate Livery: Transrail Triple Grey Livery Named ‘Loch Eil Outward Bound’ St Blazey Lizard Depot plaques Semi-gloss finish Faithfully created using accurate colours and fonts - TT:120 Scale

Hornby BR Class 43 HST 43136 & 43189 FGW Gold Stripe (TT)

BR Class 43 HST 43136 & 43189 FGW Gold Stripe  The Class 43 HST Power Cars and Mk3 trailing coaches have been a mainstay of the Hornby OO and TT:120 ranges for many years and we are delighted to announce a further example in TT:120, depicting 43136 and 43189 ‘Railway Heritage Trust’ in First Great Western Green, Gold and White livery. Featuring working directional and cab lights, a coreless motor, die-cast chassis and numerous separately fitted parts, the TT:120 Class 43 HST makes an excellent addition to your collection. Model Specification: Twin pack of highly detailed models extensive research and design Motorised Power Car and Unmotorised Dummy Car Die-cast chassis Separately fitted parts including cab and guard door handrails, ETH sockets, underframe equipment Brass exhaust cover Detailed cab interior Coreless motor in motorised car capable of pulling full-length HST rakes Electrical pick-ups on both motorised/unmotorised bogies Pivoting NEM coupling sockets Accessory pack Minimum 2nd radius curves Electronics: Working directional and cab lights Next18 DCC Decoder socket in motorised/unmotorised cars compatible with HM7000 system Decoder socket housed underneath clip-on body for easy access. No screwdriver required Space for HM7000-N18TXS Sound Decoder to be fitted Space for HM7070 Power Bank for uninterrupted running Tooling: Single roof fan Long exhaust shroud Early style of marker lights Livery: First Great Western Green, Gold and White, commonly referred to as ‘Fag Packet’ livery Semi-gloss finish Faithfully created using accurate colours and fonts - TT:120 Scale

Hornby BR Class 08 08499 EWS (TT)

BR Class 08 08499 EWS  Hornby are pleased to present a further two new colourful identities of the ever-popular BR Class 08 shunting diesel engine in the April Range Launch. Featuring a diecast chassis, coreless motor, all-wheel drive, immaculate paint application and much more, this ubiquitous shunting loco is undoubtedly going to stand out on your TT:120 layout. This example depicts No.08499 in early 2000’s corporate EWS Maroon & Gold livery, whilst allocated to depots in the South-West of England. Model Specification: Highly detailed model based on extensive research and design Diecast chassis Assortment of separately fitted parts, including body grabrails, cab steps, sandpipe fillers and buffer stocks Brass coupling rods Detailed cab interior Powerful coreless motor providing power to all wheels Electrical pick-ups on all wheels Pivoting NEM coupling sockets Accessory pack that includes bufferbeam pipes Minimum 2nd radius curves Electronics: 6-Pin DCC Decoder Socket compatible with HM7000 system Livery: EWS Maroon & Gold Yellow Coupling Rods Semi-gloss finish Faithfully created using accurate colours and fonts - TT:120 Scale

Hornby BR Class 08 08593/D3760 'Colchester TMD' Retro Lined Purple (TT)

BR Class 08 08593/D3760 'Colchester TMD' Retro Lined Purple Adding to the ever-popular BR Class 08 diesel range, is Colchester TMD D3760. Featuring a die-cast chassis, coreless motor, all-wheel drive, and immaculate paint application, this ubiquitous shunting locomotive will stand out on your TT:120 layout. This example depicts No.08593/D3760 in retro BR Lined Purple livery, complete with ‘Cycling Lion’ Early Emblem and named ‘Colchester TMD’ as per 1990’s condition when based at either Colchester or Ipswich. Model Specification: Highly detailed model based on extensive research and design Die-cast chassis Assortment of separately fitted parts, including body grabrails, cab steps, sandpipe fillers and buffer stocks Brass coupling rods Detailed cab interior Powerful coreless motor providing power to all wheels Electrical pick-ups on all wheels Pivoting NEM coupling sockets Accessory pack that includes bufferbeam pipes Minimum 2nd radius curves Electronics: 6-Pin DCC Decoder Socket compatible with HM7000 system Livery: Retro BR Lined Purple, complete with early emblems Crisply applied Red lining White roof Wasp stripes Semi-gloss finish Faithfully created using accurate colours and fonts - TT:120 Scale

Hornby BR Class 30 D5502 BR Green (Sound Fitted) (TT)

BR Class 30 D5502 BR Green (Sound Fitted) Hornby are delighted to present the newest addition to the TT:120 diesel locomotive family: the Brush Type 2 Class 30 and 31. This brand-new, highly detailed tooling covers the extensive history of the ‘Gargoyles’: from skinhead examples from the late 50s, to modern Class 31s retrofitted with high intensity lights and NRN roof pods. This exciting new range of Type 2s will be available in either DCC Ready or Sound Fitted format. TT3071TXSM is DCC Sound Fitted and depicts Class 30 D5502 in BR Green with duck egg blue stripes. Model Specification: Highly detailed model based on extensive research and design Die-cast chassis Wealth of separately fitted parts, including front end handrails, disc headcodes (where applicable) and roof grille Detailed cab interior Powerful five-pole motor providing power to all wheels Electrical pick-ups on all wheels Pivoting NEM coupling sockets Accessory pack that includes optional buffer beam pipes Minimum 2nd radius curves Electronics: Space for HM7070 Power Bank for uninterrupted running Sound: Utilises high-fidelity HM7000 sound file Chassis-mounted speaker Tooling: Indicator headcode discs 'Skinhead’ roof Toffee Apple cab style Mirrlees exhaust Side steps Oil filler Water filler Open boiler port Without door louvres Livery: BR Green with duck egg stripes Later British Railways crests Authentic livery colours and font types Semi-gloss finish - TT:120 Scale

Hornby BR Class 30 D5502 BR Green (TT)

BR Class 30 D5502 BR Green w/ Duck Egg Lining Hornby are delighted to present the newest addition to the TT:120 diesel locomotive family: the Brush Type 2 Class 30 and 31. This brand-new, highly detailed tooling covers the extensive history of the ‘Gargoyles’: from skinhead examples from the late 50s, to modern Class 31s retrofitted with high intensity lights and NRN roof pods. This exciting new range of Type 2s will be available in either DCC Ready or Sound Fitted format. TT3071M depicts Class 30 D5502 in BR Green with duck egg blue stripes. Model Specification: Highly detailed model based on extensive research and design Die-cast chassis Wealth of separately fitted parts, including front end handrails, disc headcodes (where applicable) and roof grille Detailed cab interior Powerful five-pole motor providing power to all wheels Electrical pick-ups on all wheels Pivoting NEM coupling sockets Accessory pack that includes optional buffer beam pipes Minimum 2nd radius curves Electronics: Next18 DCC Decoder socket compatible with HM7000 system Decoder socket housed underneath clip-fit body for easy access Space for HM7070 Power Bank for uninterrupted running Tooling: Indicator headcode discs ‘Skinhead’ roof Toffee Apple cab style Mirrlees exhaust Side steps Oil filler Water filler Open boiler port Without door louvres Livery: BR Green with duck egg stripes Later British Railways crests Authentic livery colours and font types Semi-gloss finish - TT:120 Scale

Hornby BR Class 31 31219 BR Civil Engineers "Dutch" (TT)

BR Class 31 31219 BR Civil Engineers "Dutch" Hornby are delighted to present the newest addition to the TT:120 diesel locomotive family: the Brush Type 2 Class 30 and 31. This brand-new, highly detailed tooling covers the extensive history of the ‘Gargoyles’: from skinhead examples from the late 50s, to modern Class 31s retrofitted with high intensity lights and NRN roof pods. This exciting new range of Type 2s will be available in either DCC Ready or Sound Fitted format. TT3074M depicts Class 31219 in BR Civil Engineers ‘Dutch’ Grey & Yellow. Model Specification: Highly detailed model based on extensive research and design Die-cast chassis Wealth of separately fitted parts, including front end handrails, disc headcodes (where applicable) and roof grille Detailed cab interior Powerful five-pole motor providing power to all wheels Electrical pick-ups on all wheels Pivoting NEM coupling sockets Accessory pack that includes optional bufferbeam pipes Minimum 2nd radius curves Electronics: Next18 DCC Decoder socket compatible with HM7000 system Decoder socket housed underneath clip-fit body for easy access Space for HM7070 Power Bank for uninterrupted running Tooling: Plated headcode roof High intensity light NRN roof pods Later cab style English Electric exhaust Plated side steps Plated oil filler Plated water filler Plated boiler port Plated front door With door louvres Livery: BR Civil Engineers ‘Dutch’ Grey and Yellow Silver BR double arrows Blue Stratford Sparrow depot plaques Full yellow ends Authentic livery colours and font types Semi-gloss finish - TT:120 Scale

Hornby BR Class 31 31237 BR Railfreight Red Stripe (TT)

BR Class 31 31237 BR Railfreight Red Stripe Hornby are delighted to present the newest addition to the TT:120 diesel locomotive family: the Brush Type 2 Class 30 and 31. This brand-new, highly detailed tooling covers the extensive history of the ‘Gargoyles’: from skinhead examples from the late 50s, to modern Class 31s retrofitted with high intensity lights and NRN roof pods. This exciting new range of Type 2s will be available in either DCC Ready or Sound Fitted format. TT3073M depicts Class 31237 in BR Railfreight Grey with solebar red stripe. Model Specification: Highly detailed model based on extensive research and design Die-cast chassis Wealth of separately fitted parts, including front end handrails, disc headcodes (where applicable) and roof grille Detailed cab interior Powerful five-pole motor providing power to all wheels Electrical pick-ups on all wheels Pivoting NEM coupling sockets Accessory pack that includes optional bufferbeam pipes Minimum 2nd radius curves Electronics: Next18 DCC Decoder socket compatible with HM7000 system Decoder socket housed underneath clip-fit body for easy access Space for HM7070 Power Bank for uninterrupted running Tooling: Plated headcode roof Later cab style English Electric exhaust Plated side steps Plated oil filler Plated water filler Plated boiler port Plated front door With door louvres Livery: BR Railfreight grey Solebar red stripe Full yellow ends Large bodyside double arrows Authentic livery colours and font types Semi-gloss finish - TT:120 Scale

Hornby BR Class 31 31270 BR Blue (Sound Fitted) (TT)

BR Class 31 31270 BR Blue (Sound Fitted) Hornby are delighted to present the newest addition to the TT:120 diesel locomotive family: the Brush Type 2 Class 30 and 31. This brand-new, highly detailed tooling covers the extensive history of the ‘Gargoyles’: from skinhead examples from the late 50s, to modern Class 31s retrofitted with high intensity lights and NRN roof pods. This exciting new range of Type 2s will be available in either DCC Ready or Sound Fitted format. TT3072TXSM is DCC Sound Fitted depicts Class 31270 in BR Blue. Model Specification: Highly detailed model based on extensive research and design Die-cast chassis Wealth of separately fitted parts, including front end handrails, disc headcodes (where applicable) and roof grille Detailed cab interior Powerful five-pole motor providing power to all wheels Electrical pick-ups on all wheels Pivoting NEM coupling sockets Accessory pack that includes optional bufferbeam pipes Minimum 2nd radius curves Electronics: Next18 DCC Decoder socket compatible with HM7000 system Decoder socket housed underneath clip-fit body for easy access Space for HM7070 Power Bank for uninterrupted running Sound: Utilises high-fidelity HM7000 sound file Chassis-mounted speaker Tooling: Glazed headcode roof Later cab style English Electric exhaust Plated side steps Oil filler Plated water filler Plated boiler port Plated front door With door louvres Livery: BR Blue Full yellow ends Small bodyside double arrows Authentic livery colours and font types Semi-gloss finish - TT:120 Scale

Hornby BR Class 31 31270 BR Blue (TT)

BR Class 31 31270 BR Blue Hornby are delighted to present the newest addition to the TT:120 diesel locomotive family: the Brush Type 2 Class 30 and 31. This brand-new, highly detailed tooling covers the extensive history of the ‘Gargoyles’: from skinhead examples from the late 50s, to modern Class 31s retrofitted with high intensity lights and NRN roof pods. This exciting new range of Type 2s will be available in either DCC Ready or Sound Fitted format. TT3072M depicts Class 31270 in BR Blue. Model Specification: Highly detailed model based on extensive research and design Die-cast chassis Wealth of separately fitted parts, including front end handrails, disc headcodes (where applicable) and roof grille Detailed cab interior Powerful five-pole motor providing power to all wheels Electrical pick-ups on all wheels Pivoting NEM coupling sockets Accessory pack that includes optional bufferbeam pipes Minimum 2nd radius curves Electronics: Next18 DCC Decoder socket compatible with HM7000 system. Decoder socket housed underneath clip-fit body for easy access. Space for HM7070 Power Bank for uninterrupted running Tooling: Glazed headcode roof Later cab style English Electric exhaust Plated side steps Oil filler Plated water filler Plated boiler port Plated front door With door louvres Livery: BR Blue Full yellow ends Small bodyside double arrows Authentic livery colours and font types Semi-gloss finish - TT:120 Scale

Hornby Stanier 5MT 'Black 5' 45315 BR Lined Black (Early) (SF) (TT)

Stanier 5MT 'Black 5' 45315 BR Lined Black (Early) (Sound Fitted) The Stanier 5MT 'Black 5' is the latest addition to the TT:120 steam locomotive family., featuring the expertly researched and highly accurate CAD from its OO gauge cousin. This DCC sound-fitted version if the LMS mixed-traffic workhorse is sure to make an impression on any TT:120 layout. This BR Stanier 5MT model depicts No.45315 in British Railways Lined Black livery, with early ‘Cycling Lion’ emblem on the tender. Model Specification: Highly detailed model based on extensive research and design from the critically acclaimed OO gauge version Die-cast boiler and running plate Wealth of separately fitted parts, including boiler handrails, steam pipes, whistles, steps, and sanding pipes. Detailed cab interior Powerful coreless motor providing power to locomotive driving wheels Electrical pick-ups on driving wheels and tender wheels Brass connector rods and slide bars Pivoting NEM coupling sockets Accessory pack that includes optional snowplough and decorative coupling hook Minimum 2nd radius curves Electronics: Next18 DCC sound decoder fitted is compatible with HM7000 system Space for HM7070 Power Bank for uninterrupted running Sound: Utilises same high-fidelity HM7000 sound file present on OO gauge version Assembled using live recordings of Black 5 locomotives. Tender speaker Tooling: Riveted smokebox door High smokebox steam lance Rivetted bufferbeam Capped top feed Without AWS Welded tender Livery: BR Lined Black with early ‘Cycling Lion’ emblem Authentic colours and typefaces used Gloss finish to locomotive except for cab and smokebox, which are matt. Era 4 - TT:120 Scale

Hornby Stanier 5MT 'Black 5' 45315 BR Lined Black (Early) (TT)

Stanier 5MT 'Black 5' 45315 BR Lined Black (Early) The 'Black 5's are now available in TT:120 scale! This iconic Stanier 5MT ‘Black 5’ model features the expertly researched and highly accurate CAD from its OO gauge cousin and is DCC ready for upgrade to HM7000 control. This LMS mixed-traffic workhorse is sure to make an impression on any TT:120 layout. This 'Black 5' model depicts No.45315 in British Railways Lined Black livery, with early ‘Cycling Lion’ emblem on the tender. Model Specification: Highly detailed model based on extensive research and design from the critically acclaimed OO gauge version Die-cast boiler and running plate Wealth of separately fitted parts, including boiler handrails, steam pipes, whistles, steps, and sanding pipes. Detailed cab interior Powerful coreless motor providing power to locomotive driving wheels Electrical pick-ups on driving wheels and tender wheels Brass connector rods and slide bars Pivoting NEM coupling sockets Accessory pack that includes optional snowplough and decorative coupling hook Minimum 2nd radius curves Electronics: Next18 DCC Decoder socket compatible with HM7000 system Decoder socket housed in tender for easy access Space for HM7070 Power Bank for uninterrupted running Tooling: Riveted smokebox door High smokebox steam lance Rivetted bufferbeam Capped top feed Without AWS Welded tender Livery: BR Lined Black with early ‘Cycling Lion’ emblem Authentic colours and typefaces used Gloss finish to locomotive except for cab and smokebox, which are matt. Era 4 - TT:120 Scale

Hornby Stanier 5MT 'Black 5' 45446 BR Lined Black (Late) (SF) (TT)

Stanier 5MT 'Black 5' 45446 BR Lined Black (Late) (SF) Here come the 'Black 5's - our latest addition to the TT:120 steam locomotive family. Featuring the expertly researched and highly accurate CAD from its OO gauge cousin, this BR Stanier 5MT is pre-Sound Fitted. This LMS mixed-traffic workhorse is sure to make an impression on any TT:120 layout, depicting No.45446 in British Railways Lined Black livery, with later ‘Lion and Wheel’ crest on the tender. Model Specification: Highly detailed model based on extensive research and design from the critically acclaimed OO gauge version Die-cast boiler and running plate Wealth of separately fitted parts, including boiler handrails, steam pipes, whistles, steps, and sanding pipes. Detailed cab interior Powerful coreless motor providing power to locomotive driving wheels Electrical pick-ups on driving wheels and tender wheels Brass connector rods and slide bars Pivoting NEM coupling sockets Accessory pack that includes optional snowplough and decorative coupling hook Minimum 2nd radius curves Electronics: Next18 DCC sound decoder fitted is compatible with HM7000 system Space for HM7070 Power Bank for uninterrupted running Sound: Utilises same high-fidelity HM7000 sound file present on OO gauge version Assembled using live recordings of Black 5 locomotives. Tender speaker Tooling: Riveted smokebox door No smokebox steam lance Rivetted bufferbeam Capped top feed With AWS Welded tender Livery: BR Lined Black with late crest on the tender 1960’s style OHWL stickers Sir W.G Armstrong Whitworth & Co. LTD builders plate Authentic colours and typefaces used Gloss finish to locomotive except for cab and smokebox, which are matt. Era 5 - TT:120 Scale

Hornby Stanier 5MT 'Black 5' 45446 BR Lined Black (Late) (TT)

Stanier 5MT 'Black 5' 45446 BR Lined Black (Late) This BR Stanier 5MT 'Black 5' 45446 was created using the expertly researched and highly accurate CAD from its OO gauge cousin, and is DCC Ready for upgrade to digital control if required. This LMS mixed-traffic workhorse is sure to make an impression on any TT:120 layout, depicting No.45446 in British Railways Lined Black livery, with later ‘Lion and Wheel’ crest on the tender. Model Specification: Highly detailed model based on extensive research and design from the critically acclaimed OO gauge version Die-cast boiler and running plate Wealth of separately fitted parts, including boiler handrails, steam pipes, whistles, steps, and sanding pipes. Detailed cab interior Powerful coreless motor providing power to locomotive driving wheels Electrical pick-ups on driving wheels and tender wheels Brass connector rods and slide bars Pivoting NEM coupling sockets Accessory pack that includes optional snowplough and decorative coupling hook Minimum 2nd radius curves Electronics: Next18 DCC Decoder socket compatible with HM7000 system Decoder socket housed in tender for easy access Space for HM7070 Power Bank for uninterrupted running Tooling: Riveted smokebox door No smokebox steam lance Rivetted bufferbeam Capped top feed With AWS Welded tender Livery: BR Lined Black with late crest on the tender 1960’s style OHWL stickers Sir W.G Armstrong Whitworth & Co. LTD builders plate Authentic colours and typefaces used Gloss finish to locomotive except for cab and smokebox, which are matt. Era 5 - TT:120 Scale

Hornby Stanier 5MT 'Black 5' 5408 LMS Lined Black (Sound Fitted) (TT)

Stanier 5MT 'Black 5' 5408 LMS Lined Black (Sound Fitted) The iconic Stanier 5MT ‘Black 5’ is the latest addition to the TT:120 steam locomotive family. Featuring the expertly researched and highly accurate CAD from its OO gauge cousin, and available in a Sound-Fitted format, this LMS mixed-traffic workhorse is sure to make an impression on any TT:120 layout.This BR Stanier 5MT 'Black 5' model depicts No. 5408 in late 1930’s LMS black livery with red lining, shaded gold lettering and numerals. Model Specification: Highly detailed model based on extensive research and design from the critically acclaimed OO gauge version Die-cast boiler and running plate Wealth of separately fitted parts, including boiler handrails, steam pipes, whistles, steps, and sanding pipes. Detailed cab interior Powerful coreless motor providing power to locomotive driving wheels Electrical pick-ups on driving wheels and tender wheels Brass connector rods and slide bars Pivoting NEM coupling sockets Accessory pack that includes optional snowplough and decorative coupling hook Minimum 2nd radius curves Electronics: Next18 DCC sound decoder fitted, which is compatible with HM7000 system Space for HM7070 Power Bank for uninterrupted running Sound: Utilises same high-fidelity HM7000 sound file present on OO gauge version Assembled using live recordings of Black 5 locomotives. Tender speaker Tooling: Riveted smokebox door High smokebox steam lance Flush bufferbeam Capped top feed Slide bar vacuum pump fitted Without AWS Welded tender Livery: LMS Lined Black 1936 style vermillion shaded gold lettering and numerals Gloss finish to locomotive except for cab and smokebox, which are matt. Era 3 - TT:120 Scale

Hornby Stanier 5MT 'Black 5' 5408 LMS Lined Black (TT)

Stanier 5MT 'Black 5' 5408 LMS Lined Black  The latest addition to the TT:120 steam locomotive family is the iconic Stanier 5MT ‘Black 5’. Featuring the expertly researched and highly accurate CAD from its OO gauge cousin, and with a DCC Ready decoder socket, this LMS mixed-traffic workhorse is sure to make an impression on any TT:120 layout.This model depicts No. 5408 in its late 1930’s LMS black livery, with red lining, shaded gold lettering and numerals. Model Specification: Highly detailed model based on extensive research and design from the critically acclaimed OO Gauge version Die-cast boiler and running plate Wealth of separately fitted parts, including boiler handrails, steam pipes, whistles, steps, and sanding pipes. Detailed cab interior Powerful coreless motor providing power to locomotive driving wheels Electrical pick-ups on driving wheels and tender wheels Brass connector rods and slide bars Pivoting NEM coupling sockets Accessory pack that includes optional snowplough and decorative coupling hook Minimum 2nd radius curves Electronics: Next18 DCC Decoder socket compatible with HM7000 system Decoder socket housed in tender for easy access Space for HM7070 Power Bank for uninterrupted running Tooling: Riveted smokebox door High smokebox steam lance Flush bufferbeam Capped top feed Slide bar vacuum pump fitted Without AWS Welded tender Livery: LMS Lined Black 1936 style vermillion shaded gold lettering and numerals Gloss finish to locomotive except for cab and smokebox, which are matt. Era 3 - TT:120 Scale

Hornby LNER J50 Class 68958 BR Black (Early) (TT)

LNER J50 Class 68958 BR Black (Early) Hot on the heels of the first run of J50’s, is this BR (Early) J50 Class 68958 tank engine for your TT:120 collection. Moulded in both die-cast and plastic, this characterful locomotive looks and performs excellently thanks to all-wheel pickups and a smooth coreless motor. For those operating on DCC, a 6-Pin decoder socket is located within the boiler and is compatible with HM7000.  This example depicts No.68958 in BR Black livery, with early emblems on the tank sides. Model Specification: Based on new J50 tooling suite Expertly moulded die-cast body and chassis for added realism and weight Number of separately fitted parts, including smokebox door, water filler caps, chimney, safety valves, handrails, lamp irons and buffers. Brass double-jointed connector rods with metal securing pins Detailed cab interior Pivoting NEM sockets for improved coupling around tight curves Precision-engineered coreless motor for smooth running All-wheel pick-ups Accessory pack Capable of traversing 1st radius curves, but recommended minimum is 2nd radius. Electronics: 6-Pin DCC Decoder socket compatible with HM7000 system. Tooling: Smokebox door numberplate Coal rails Livery: BR Plain Black Livery ‘Cycling Lion’ Early Emblem on tank sides Authentic colours and typefaces used Semi-gloss finish Era 4. - TT:120 Scale

Hornby A1X Terrier 10 Isle of Wight Central Railway Lined Maroon (TT)

A1X Terrier 10 Isle of Wight Central Railway Lined Maroon The delightful LB&SCR A1/A1X 0-6-0 Terrier Steam Locomotive is back in TT:120 scale, featuring the latest tooling suite from 2025. This beautiful representation of the ever-popular Class A1 perfectly captures the diminutive character of the prototype, and has been designed for smooth and reliable operation, including the option for digital command control via a 6-pin decoder socket (decoder sold seperately). This particular example depicts No.10 in Isle of Wight Central Railway Lined Maroon livery. Model Specification: Based on the highly accurate 2025 A1/A1X Terrier tooling suite Expertly moulded die-cast body and chassis for added realism and weight Number of separately fitted parts, including smokebox door, water filler caps, handrails, lamp irons and buffers. Brass connector rods with metal securing pins Detailed cab interior Pivoting NEM sockets for improved coupling around tight curves Precision-engineered coreless motor for smooth running All-wheel pick-ups Accessory pack Capable of traversing 1st radius curves, but recommended minimum is 2nd radius. Electronics: 6-Pin DCC Decoder socket compatible with HM7000 system Tooling: Stroudley chimney Flush smokebox door Four lamp brackets on front and rear Low bufferstock with no lamp brackets Steam pipes removed Small cab bunker with no coal rails Westinghouse pump fitted Livery: IOW Lined Maroon - TT:120 Scale

Hornby A1X Terrier 655 'Stepney' LB&SCR Improved Engine Green (TT)

A1X Terrier 655 'Stepney' LB&SCR Improved Engine Green The delightful TT:120 scale LB&SCR A1/A1X 0-6-0 Terrier Steam Locomotive is back, utilising the highly accurate tooling suite from 2025. This beautiful representation of the ever-popular Class A1 perfectly captures the diminutive character of the prototype, and has been designed for smooth and reliable operation, including the provision for digital command control via a 6-pin decoder socket.  This particular example depicts No.655 ‘Stepney’ in London Brighton & South Coast Railway Improved Engine Green. Model Specification: Based on 2025 A1/A1X Terrier tooling suite Expertly moulded die-cast body and chassis for added realism and weight Number of separately fitted parts, including smokebox door, water filler caps, handrails, lamp irons and buffers. Brass connector rods with metal securing pins Detailed cab interior Pivoting NEM sockets for improved coupling around tight curves Precision-engineered coreless motor for smooth running All-wheel pick-ups Accessory pack Capable of traversing 1st radius curves, but recommended minimum is 2nd radius. Electronics: 6-Pin DCC Decoder socket compatible with HM7000 system. Tooling: Stroudley chimney Flush smokebox door Four lamp brackets on front and rear Low bufferstock with no lamp brackets Steam pipes removed Small cab bunker with no coal rails Westinghouse pump fitted. Livery: LB&SCR Improved Engine Green Maroon chassis Era 2. - TT:120 Scale

Hornby A1X Terrier 735 LSWR Lined Green (TT)

A1X Terrier 735 LSWR Lined Green  This delightful TT:120 scale LB&SCR A1/A1X 0-6-0 Terrier Steam Locomotive model features the highly accurate 2025 tooling suite. A beautiful representation of the ever-popular Class A1, the model perfectly captures the diminutive character of the prototype, and has been designed for smooth and reliable operation, including provision for digital command control via a 6-pin decoder socket. This particular example depicts No.735 in London and South Western Railway Lined Green livery. Model Specification: Based on new 2025 A1/A1X Terrier tooling suite Expertly moulded die-cast body and chassis for added realism and weight Number of separately fitted parts, including smokebox door, water filler caps, handrails, lamp irons and buffers. Brass connector rods with metal securing pins Detailed cab interior Pivoting NEM sockets for improved coupling around tight curves Precision-engineered coreless motor for smooth running All-wheel pick-ups Accessory pack Capable of traversing 1st radius curves, but recommended minimum is 2nd radius. Electronics: 6-Pin DCC Decoder socket compatible with HM7000 system Tooling: Stroudley chimney Flush smokebox door Four lamp brackets on front and rear Low bufferstock with no lamp brackets Steam pipes fitted Small cab bunker with no coal rails Westinghouse pump removed Livery: LSWR Lined Green Livery Maroon edging to tank and cab sides - TT:120 Scale

Hornby Coalfield Freight Class 37 Train Set (Sound Fitted) (TT)

Coalfield Freight Class 37 Train Set (Sound Fitted) Take a step back in time with ‘Coalfield Freight’ Train Set, the perfect introduction into the terrific world of TT:120 gauge from Hornby.  Whether you’re a beginner, returning to the hobby or a seasoned railway modeller, this starter set has everything you need to get started in the space-saving scale of ‘Tabletop’ TT:120. This set includes a highly detailed model of a Class 37 Diesel locomotive, three colourful wagons, oval starter track, siding and controller. Not only is this set easy to build and endlessly entertaining, the well-designed and durable TT:120 locomotives mean you can rest assured your train set will work for many years to come. With a plethora of separately available extension track packs, rolling stock, buildings and accessories, the possibilities for expanding your collection are endless! Inside the box, you’ll find a highly detailed, motorised diesel locomotive alongside three British Railway freight hopper wagons, each beautifully decorated. The set includes all the track you need to create your miniature railway, as well as an electric controller for smooth operation. Includes: BR Class 37 37799 'Sir Dyfed County of Dyfed' in Triple Grey Coal Sector Livery 3x HFA MGR Coal Hoppers in Coal Sector Livery 3rd Radius Oval of Track with siding (125cm x 84cm) Wall Plug Transformer DCC Power Connecting Track Re-Railer - TT:120 Scale

Hornby Coalfield Freight Class 37 Train Set (TT)

Coalfield Freight Class 37 Train Set Take a step back in time with ‘Coalfield Freight’ Train Set, the perfect introduction into the terrific world of TT:120 gauge from Hornby.  Whether you’re a beginner, returning to the hobby or a seasoned railway modeller, this starter set has everything you need to get started in the space-saving scale of ‘Tabletop’ TT:120. This set includes a highly detailed model of a Class 37 Diesel locomotive, three colourful wagons, oval starter track, siding and controller. Not only is this set easy to build and endlessly entertaining, the well-designed and durable TT:120 locomotives mean you can rest assured your train set will work for many years to come. With a plethora of separately available extension track packs, rolling stock, buildings and accessories, the possibilities for expanding your collection are endless! Inside the box, you’ll find a highly detailed, motorised diesel locomotive alongside three British Railway freight hopper wagons, each beautifully decorated. The set includes all the track you need to create your miniature railway, as well as an electric controller for smooth operation. Includes: BR Class 37 37799 'Sir Dyfed County of Dyfed' in Triple Grey Coal Sector Livery 3x HFA MGR Coal Hoppers in Coal Sector Livery 3rd Radius Oval of Track with siding (125cm x 84cm) DC Train Controller Wall Plug Transformer Power Connecting Track Re-Railer - TT:120 Scale

Hornby BR Class 43 HST 43128 & 43135 Scotrail Inter7City (Sound Fitted)

BR Class 43 HST 43128 & 43135 Scotrail Inter7City Train Pack (Sound Fitted) The Class 43 HST Power Cars have been a mainstay of the Hornby OO and TT:120 ranges for many years and we are delighted to announce this special commemorative train pack in OO Gauge, depicting 43128 and 43135 in ScotRail ‘InterCity 7’ livery, which are still in service as part of the last HST fleet in passenger operation in the UK. Based on the refreshed tooling suite and featuring working directional and cab lights, working roof fans, 5-pole motor with twin flywheels in the motorised car, diecast chassis and numerous separately fitted parts, this train pack is a must-have for collectors and fans of this classic British design. This train pack is DCC Sound Fitted with a sound decoder in both power cars. Features: Twin pack of highly detailed Class 43 models Motorised Power Car and Unmotorised Dummy Car Die-cast chassis Separately fitted parts including cab handrails, underframe equipment and roof exhaust shroud Detailed cab interior 5-pole motor with twin flywheels in motorised car capable of pulling full-length HST rakes Electrical pick-ups on both motorised/unmotorised bogies Pivoting NEM coupling sockets Accessory pack Minimum 2nd radius curves Working directional and cab headlights Working roof fans 21-Pin sound decoder fitted in both power cars Speaker in both power cars Space for HM7070 Power Bank for uninterrupted running Utilises high-fidelity HM7000 sound file created using live recordings of Class 43 locomotives. - OO Scale

Hornby BR Class 43 HST 43128 & 43135 Scotrail Inter7City Train Pack

BR Class 43 HST 43128 & 43135 Scotrail Inter7City Train Pack The Class 43 HST Power Cars have been a mainstay of the Hornby OO and TT:120 ranges for many years and we are delighted to announce this special commemorative train pack in OO Gauge, depicting 43128 and 43135 in ScotRail ‘InterCity 7’ livery, which are still in service as part of the last HST fleet in passenger operation in the UK. Based on the refreshed tooling suite and featuring working directional and cab lights, working roof fans, 5-pole motor with twin flywheels in the motorised car, die-cast chassis and numerous separately fitted parts, this train pack is a must-have for collectors and fans of this classic British design. Features: Twin pack of highly detailed Class 43 models Motorised Power Car and Unmotorised Dummy Car Die-cast chassis Separately fitted parts including cab handrails, underframe equipment and roof exhaust shroud Detailed cab interior 5-pole motor with twin flywheels in motorised car capable of pulling full-length HST rakes Electrical pick-ups on both motorised/unmotorised bogies Pivoting NEM coupling sockets Accessory pack Minimum 2nd radius curves Working directional and cab headlights Working roof fans DCC Ready with 21-Pin decoder socket in motorised/dummy cars compatible with HM7000 system Space for HM7000-21TXS Sound Decoder to be fitted Space for HM7070 Power Bank for uninterrupted running Some light functions will only operate to their fullest capability on DCC - OO Scale 

Hornby SR Merchant Navy 21C4 'Cunard White Star' (TXS Steam Generator)

SR Merchant Navy 21C4 'Cunard White Star' (TXS Steam Generator) The popular Bulleid Pacific Merchant Navy is back in OO gauge with a brand new livery and steam generator technology. This highly detailed model represents the air-smoothed 'Spam Can', also known as 21C4 'Cunard White Star' in Southern Railways' malachite green. A must-have model for Southern Region collectors, this feature-packed locomotive is pre-fitted with HM7000 control, for the most satisfying model railway experience yet. Please Note: This model requires a DCC controller or the HM7000 App to control. Details: Highly detailed cab with fully decorated backhead and decorated instrument dials  Opening cab roof vent  Removable simulated coal load with fully detailed tender bunker  Accurately modelled Merchant Navy Bullied-Firth-Brown wheels  Modified 21C4 'widows peak' front end streamlining and chimney arrangement  5000 gallon tender with rear access ladders.  Cast trailing truck  Separately fitted nameplate, number plate, and company ownership plate  Circular smokebox door company plate  Sprung metal buffers  Heavy die-cast chassis, pony truck, and trailing truck  Features: Pre-fitted steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element).  Pre-fitted 21-pin HM7000 decoder and speaker. The decoder is compatible with NMRA DCC controllers and HM7000 app control.  Pre-installed Merchant Navy sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect.  Adjustable steam output settings via the decoder  Water reservoir for up to 20 minutes of continuous steam running  Die-cast connecting rods and valve gear  Powerful 5-pole skew-wound motor  Flywheel with cardan shaft arrangement for smooth running  Oilite main drive bearings Wheel pickups on tender and driven locomotive wheelsets  Pogo pin wheel pickup arrangement for easy pickup servicing  8-way locomotive to tender drawbar, with integrated electrical connection for easy coupling and decoupling.  Front and rear NEM coupling pockets, with narrow tension lock couplings  Optional fit rear flanged wheelset (only recommended for larger layouts with sweeping curves or display purposes).  - OO Scale 

Hornby Railroad: Class 66 GBRf 66775 'HMS Argyll' (DCC Sound Fitted)

Railroad: Class 66 GBRf 66775 'HMS Argyll' (DCC Sound Fitted) Product Information: The Railroad GBRf Class 66 66775 'HMS Argyll' model is a faithful replica of the original locomotive, featuring a HM7000 21-pin sound decoder preloaded with realistic Class 66 sound recordings and etched nameplates. History: Built in Muncie, Indiana and entering service under No. 66775, this locomotive was named in 2017 after the famous and oldest serving Type 23 frigates in the Royal Navy, ‘HMS Argyll’. It carries the pennant number F231 on its bodyside with the Royal Navy white ensign and crest on the cab sides in celebration of the famous Frigate. 

Hornby Railroad: Class 66 66022 'Lafarge Charnwood' EWS

Railroad: Class 66 66022 'Lafarge Charnwood' EWS Entering service in 1998, this was one of the original 250 locomotives ordered for EWS.  Funded by Locomotion Capital Ltd, it was leased to EWS until December 2008. No. 66022 was one of 60 locomotives sub-let to its Euro Cargo Rail subsidiary in France, starting in June 2006. It was then sold by to Angel Trains, who leased it to DB Schenker Rail UK, but the locomotive remained in service in France, returning to the UK for heavy maintenance when required via the Channel Tunnel. Today it is part of the DB Cargo fleet.  Our RailRoad model faithfully replicates this Class 66 locomotive, with an emphasis on durability for regular model railway use. - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: Class 66 66022 'Lafarge Charnwood' EWS (Sound Fitted)

Railroad: Class 66 66022 'Lafarge Charnwood' EWS (Sound Fitted) Entering service in 1998, this was one of the original 250 locomotives ordered for EWS. Funded by Locomotion Capital Ltd, it was leased to EWS until December 2008.  No. 66022 was one of 60 locomotives sub-let to its Euro Cargo Rail subsidiary in France, starting in June 2006. It was then sold to Angel Trains, who leased it to DB Schenker Rail UK, but the locomotive remained in service in France, returning to the UK for heavy maintenance when required via the Channel Tunnel. Today it is part of the DB Cargo fleet.  Our RailRoad replica model is a faithful representation of the Class 66 locomotive, with added durability and pre-fitted with a DCC sound chip for extra authenticity. - OO Scale

Hornby Railroad: Class 66 66601 Freightliner 60th Green

Railroad: Class 66 66601 Freightliner 60th Green First introduced in 1998, the Class 66 revolutionised the rail freight sector in Britain and have become the most prolific type for heavy freight work. In 2000, a new 66/6 sub-class was created with a lower gear ratio version enabling heavier trains to be hauled, albeit at slower speeds.  A total of 25 were put into service by Freightliner, numbered 66601-625 and some of these have since moved overseas for use with Freightliner Poland. Used mainly on oil, aggregate, and cement trains, 66601 is one of 22 still operating in the UK and, on 18th March 2025, was turned out at Eastleigh Works in a new green ‘Freightliner 60’ livery.  We've faithfully recreated this locomotive in RailRoad model form, keeping plenty of detail but incorporating more durable features, making it ideal for a busy model railway layout. - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: Class 66 66601 Freightliner 60th Green (Sound Fitted)

Railroad: Class 66 66601 Freightliner 60th Green (Sound Fitted) First introduced in 1998, the Class 66 revolutionised the rail freight sector in Britain and have become the most prolific type for heavy freight work.  In 2000, a new 66/6 sub-class was created with a lower gear ratio version enabling heavier trains to be hauled, albeit at slower speeds. A total of 25 were put into service by Freightliner, numbered 66601-625 and some of these have since moved overseas for use with Freightliner Poland.  Used mainly on oil, aggregate, and cement trains, 66601 is one of 22 still operating in the UK and, on 18th March 2025, was turned out at Eastleigh Works in a new green ‘Freightliner 60’ livery.  We've faithfully recreated this locomotive in RailRoad model form, keeping plenty of detail but incorporating more durable features, making it ideal for a busy model railway layout. Plus, this locomotive model has been pre-fitted with a DCC sound chip for the most authentic experience. - OO Scale

Hornby Railroad: Class 66 66790 'Louise' GBRf/Colas

Railroad: Class 66 66790 'Louise' GBRf/Colas This RailRoad model locomotive represents one of three EMD Class 66s imported by Beacon Rail from Sweden that were converted for use on Network Rail at EMD Longport and designated as part of the Class 66/7 subclass.  On long-term lease to operator GBRF, 66790 is currently working under agreement for Colas Rail. The locomotive was named ‘Louise’ after Louise Garwood at Ipswich on 16 July 2023, as part of GB Railfreight’s annual ladies naming ceremony.  Our RailRoad models combine high detail with added durability, making them ideal for beginners, younger modellers, or those who spend a lot of time on their model railway hobby. - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: Class 66 66790 'Louise' GBRf/Colas (Sound Fitted)

Railroad: Class 66 66790 'Louise' GBRf/Colas (Sound Fitted) This model locomotive represents one of three EMD Class 66s imported by Beacon Rail from Sweden that were converted for use on Network Rail at EMD Longport and designated as part of the Class 66/7 subclass.  On long-term lease to operator GBRF, 66790 is currently working under agreement for Colas Rail. The locomotive was named ‘Louise’ after Louise Garwood at Ipswich on 16 July 2023, as part of GB Railfreight’s annual ladies naming ceremony.  Our RailRoad models combine high detail with added durability, making them ideal for beginners, younger modellers, or those who spend a lot of time on their model railway hobby. And this one is pre-fitted with a DCC sound chip for extra authenticity. - OO Scale

Hornby Railroad: BR Class 60 60038 'Avesta Polarit' EWS (Sound Fitted)

Railroad: BR Class 60 60038 'Avesta Polarit' EWS (Sound Fitted) A growth in demand in the heavy haulage sector led to a review of BR’s available motive power in the 1980s. With 185 locomotives of the Type 5, 3,000+ horsepower category available, made up of its Classes 56 and 58, it was clear that more would be needed, and BR put out an invitation to tender for new locomotives in 1987.  The 100 locomotive order was awarded to Brush in Loughborough, and these entered service between 1989 and 1993. No.60038 was named ‘Bidean nam Bian’ after the Scottish ‘Munro’ in Glen Coe.  With BR’s trainload freight business broken up into shadow franchises, the locomotive became part of Loadhaul, based in the north-east. By 1996, this had become part of EWS and 60038 was named 'Avesta Polarit' after the steel making company at the DFDS Immingham sea terminal on 19th March 2002. It is now one of 14 owned by DC Rail and currently in store.  Our detailed RailRoad replica Class 60 model retains all the charm of the original, with enhanced durability and pre-fitted DCC sound features. Product features: Design based on extensive research and original drawings HM7000-21 Pin decoder compatible Space for a additional R7408 Enhanced Bass Speaker Working directional lights All wheel electrical pickup NEM couplings Brass axle bearings Separately fitted handrails, horns and exhaust - DCC HM7000 TXS Sound Fitted - OO Scale

Hornby Railroad: BR Class 60 60039 'Dove Holes' DB Cargo

Railroad: BR Class 60 60039 'Dove Holes' DB Cargo  Entering service at Cardiff Canton in 1991, 60039 was originally named ‘Glastonbury Tor’ as part of the hills and peaks theme of the initial Class 60 naming convention.  It was later one of the locomotives selected for the ‘Super 60’ upgrade programme announced by DBS/DB Cargo in November 2010 that was designed to extend their working life by a further 15 years. No.60039 was named ‘Dove Holes’ in April 2015 and was used on limestone traffic out of Derbyshire. It is still owned by DB Cargo and is one of 52 members of the class put into storage by the company.  We've recreated this impressive locomotive in RailRoad form, bringing the most important details to life and adding features to enhance durability, making this the perfect model for regular layout use. Product features: Design based on extensive research and original drawings HM7000-21 Pin decoder compatible Space for a additional R7408 Enhanced Bass Speaker Working directional lights All wheel electrical pickup NEM couplings Brass axle bearings Separately fitted handrails, horns and exhaust - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: BR Class 60 60039 'Dove Holes' DB Cargo (Sound Fitted)

Railroad: BR Class 60 60039 'Dove Holes' DB Cargo (Sound Fitted)  Entering service at Cardiff Canton in 1991, 60039 was originally named ‘Glastonbury Tor’ as part of the hills and peaks theme of the initial Class 60 naming convention.  It was later one of the locomotives selected for the ‘Super 60’ upgrade programme announced by DBS/DB Cargo in November 2010 that was designed to extend their working life by a further 15 years. No.60039 was named ‘Dove Holes’ in April 2015 and was used on limestone traffic out of Derbyshire. It is still owned by DB Cargo and is one of 52 members of the class put into storage by the company.  We've recreated this impressive locomotive in RailRoad form, bringing the most important details to life and adding features to enhance durability, making this the perfect model for regular layout use. We've even included a pre-fitted sound chip so you can play authentic railway sounds as the model moves around your layout. Product features: Design based on extensive research and original drawings HM7000-21 Pin decoder compatible Space for a additional R7408 Enhanced Bass Speaker Working directional lights All wheel electrical pickup NEM couplings Brass axle bearings Separately fitted handrails, horns and exhaust - DCC HM7000 TXS Sound Fitted - OO Scale

Hornby Railroad: BR Class 60 60069 'Humphrey Davy' (Sound Fitted)

Railroad: BR Class 60 60069 'Humphrey Davy' Coal Sector (Sound Fitted)  The Class 60s were the last heavy haulers built for BR. No.60069 was allocated to BR’s Train Load Freight (TLF) Coal Sector and named ‘Humphrey Davy’, in honour of the inventor of the miner’s safety lamp.  Following the break-up of TLF, the Class 60s were divided between three of the shadow franchises: Mainline Freight, Loadhaul, and Transrail Freight, but not long after they were formed they were absorbed into English, Welsh & Scottish (EWS). By 2007, it was estimated that the operational fleet was down to just 60 locomotives, the rest either in store or undergoing repair. That year, EWS was acquired by DB Schenker, a wholly-owned subsidiary of German railway company, Deutche Bahn.  Our RailRoad Class 60 model represents 'Humphrey Davy' in detail, but with added features that make for a much more durable locomotive. Plus, it is pre-fitted with a DCC sound chip for the most authentic model railway experience. Product features: Design based on extensive research and original drawings HM7000-21 Pin decoder compatible Space for a additional R7408 Enhanced Bass Speaker Working directional lights All wheel electrical pickup NEM couplings Brass axle bearings Separately fitted handrails, horns and exhaust - DCC HM7000 TXS Sound Fitted - OO Scale

Hornby Railroad: BR Class 60 60069 'Humphrey Davy' Coal Sector

Railroad: BR Class 60 60069 'Humphrey Davy' Coal Sector The Class 60s were the last heavy haulers built for BR. No.60069 was allocated to BR’s Train Load Freight (TLF) Coal Sector and named ‘Humphrey Davy’, in honour of the inventor of the miner’s safety lamp.  Following the break-up of TLF, the Class 60s were divided between three of the shadow franchises: Mainline Freight, Loadhaul and Transrail Freight, but not long after they were formed they were absorbed into English, Welsh & Scottish (EWS). By 2007, it was estimated that the operational fleet was down to just 60 locomotives, the rest either in store or undergoing repair. That year, EWS was acquired by DB Schenker, a wholly-owned subsidiary of German railway company, Deutche Bahn.  Our RailRoad Class 60 model represents 'Humphrey Davy' in detail, but with added features that make for a much more durable locomotive. Product features: Design based on extensive research and original drawings HM7000-21 Pin decoder compatible Space for a additional R7408 Enhanced Bass Speaker Working directional lights All wheel electrical pickup NEM couplings Brass axle bearings Separately fitted handrails, horns and exhaust - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: BR Class 90 90001 'Royal Scot' LSL Intercity

Railroad: BR Class 90 90001 'Royal Scot' LSL Intercity  As the first member of class (originally to be designated Class 87/2 as the locomotives were seen as an upgraded version of the existing Class 87s), 90001 initially went to the Rail Technical Centre at Derby for testing in October 1987.  It entered service at Willesden depot in October 1987 and, in 1989, was named ‘BBC Midlands Today’. That name was removed in 2004 and, ten years later, it was given the name ‘Crown Point’ while based at Norwich with Abellio Greater Anglia. In April 2020, it was bought by Locomotive Services Limited, Crewe for main line excursion work. They repainted it in the original InterCity ‘Swallow’ livery and renamed it ‘Royal Scot’. It is one of three Class 90s currently owned by LSL, the others being 90002 and 90026.  This RailRoad locomotive model is a faithful representation of the electric engine, but with more durable features that make it perfect for regular model railway running. - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: BR Class 90 90001 'Royal Scot' LSL Intercity (Sound)

Railroad: BR Class 90 90001 'Royal Scot' LSL Intercity (Sound Fitted) As the first member of class (originally to be designated Class 87/2 as the locomotives were seen as an upgraded version of the existing Class 87s), 90001 initially went to the Rail Technical Centre at Derby for testing in October 1987.  It entered service at Willesden depot in October 1987 and, in 1989, was named ‘BBC Midlands Today’. That name was removed in 2004 and, ten years later, it was given the name ‘Crown Point’ while based at Norwich with Abellio Greater Anglia.  In April 2020, it was bought by Locomotive Services Limited, Crewe for main line excursion work. They repainted it in its original InterCity ‘Swallow’ livery and renamed it ‘Royal Scot’. It is one of three Class 90s currently owned by LSL, the others being 90002 and 90026.  This RailRoad model brings the locomotive to life in OO scale form, but with more durable features than found on our main range. It is also pre-fitted with a DCC sound chip, for the most authentic model railway experience. - DCC HM7000 TXS Sound Fitted - OO Scale

Hornby Railroad: BR Class 90 90020 'Collingwood' EWS

Railroad: BR Class 90 90020 'Collingwood' EWS The Class 90 is a type of locomotive designed for mixed traffic work on the 25kV AC overhead network as replacements for aging electrics such as the Classes 81, 82, 83, 84 and 85 that dated back to the 1960s.  Between 1987 and 1990, 50 examples were built at BREL Crewe and put into traffic on the West Coast Main Line during the latter years of British Rail and were equally at home on freight as they were on passenger traffic. Following privatisation of BR, the type served with various operators, such as Abellio Greater Anglia, Virgin Trains West Coast, GNER, and freight operators Freightliner and EWS.  This RailRoad locomotive model of 90020 is depicted during its time as part of the EWS fleet when named ‘Collingwood’, in a striking red and yellow livery. The original locomotive is currently in short-term storage for potential further use by DB Cargo. - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: BR Class 90 90020 'Collingwood' EWS (Sound Fitted)

Railroad: BR Class 90 90020 'Collingwood' EWS (Sound Fitted) The Class 90 is a type of locomotive designed for mixed traffic work on the 25kV AC overhead network as replacements for aging electrics such as the Classes 81, 82, 83, 84 and 85 that dated back to the 1960s.  Between 1987 and 1990, 50 examples were built at BREL Crewe and put into traffic on the West Coast Main Line during the latter years of British Rail and were equally at home on freight and passenger traffic. Following privatisation of BR, the type served with various operators, such as Abellio Greater Anglia, Virgin Trains West Coast, GNER, and freight operators Freightliner and EWS.  This RailRoad locomotive model of 90020 is depicted during its time as part of the EWS fleet when named ‘Collingwood’. Sporting a striking red and yellow livery, this model is DCC sound fitted, for an extra authentic touch. The original locomotive is currently in short-term storage for potential further use by DB Cargo. - DCC HM7000 TXS Sound Fitted - OO Scale

Hornby Railroad: BR Class 91 91018 'Robert Louis Stevenson' (Sound)

Railroad: BR Class 91 91018 'Robert Louis Stevenson' Intercity (Sound Fitted)  A total of 31 Class 91s were built between 1988 and 1991 for high-speed express passenger train haulage as part of the East Coast electrification programme of the late 1980s. Also known as InterCity 225s in anticipation of their service speed of 225km/h (140mph), they were also referred to as ‘Electras’ by BR during their development phase.  No. 91018 was built at BREL Crewe and entered service in 1990. It received the name ‘Robert Louis Stevenson’ in November 1993, and this was changed to ‘Bradford Film Festival’ in February 2000. It was modified to Class 91/1 in 2002 and renumbered 91118, and remained in service until withdrawn by LNER in May 2020, before going into storage. It was scrapped by February 2023.  Bringing RailRoad detail and durability to the iconic design, this OO gauge model locomotive also features pre-fitted sound. - DCC HM7000 TXS Sound Fitted - OO Scale

Hornby Railroad: BR Class 91 91018 'Robert Louis Stevenson' Intercity

Railroad: BR Class 91 91018 'Robert Louis Stevenson' Intercity A total of 31 Class 91s were built between 1988 and 1991 for high-speed express passenger train haulage as part of the East Coast electrification programme of the late 1980s. Also known as InterCity 225s in anticipation of their service speed of 225km/h (140mph), they were also referred to as ‘Electras’ by BR during their development phase.  No. 91018 was built at BREL Crewe and entered service in 1990. It received the name ‘Robert Louis Stevenson’ in November 1993, and this was changed to ‘Bradford Film Festival’ in February 2000. It was modified to Class 91/1 in 2002 and renumbered 91118, and remained in service until withdrawn by LNER in May 2020, before going into storage. It was scrapped by February 2023.  This RailRoad model locomotive is a faithful representation of the BR Intercity Class 91 'Robert Louis Stevenson', with a more durable construction that makes it perfect for beginner modellers. - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: BR Class 37 37501 'Teesside Steelmaster' ROG BS

Railroad: BR Class 37 37501 'Teesside Steelmaster' ROG British Steel Blue Built by English Electric at its Vulcan Foundry in Lancashire, the locomotive this RailRoad model is based on started life in January 1961 as D6705, going new to Stratford depot in London.  After becoming 37005 under TOPS, it was rebuilt as a Class 37/5 in April 1985, which included replacing its EE generator with a new Brush unit, and a complete re-wire, with a consequent renumbering to 37501. It was then painted into its distinctive British Steel pale blue colour scheme, gaining Thornaby Kingfisher motif and British Steel logos. It was then named ‘Teesside Steelmaster’ in 1987.  It was later modified for the proposed Channel Tunnel sleeper ‘Nightstar’ project (which was later aborted) to become a 37/6 in February 1995 and renumbered to 37601. It is currently one of six Class 37s leased by Rail Operations Group from Europhoenix for contracted movement of passenger stock, including EMUs. It was returned to its 1987 guise during a repaint in 2025.  This RailRoad model locomotive is a durable design, perfect for model railway beginners, younger enthusiasts, or anyone who enjoys running their trains daily. - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: BR Class 37 37501 'Teesside Steelmaster'(Sound Fitted)

Railroad: BR Class 37 37501 'Teesside Steelmaster' ROG British Steel Blue (Sound Fitted) Built by English Electric at its Vulcan Foundry in Lancashire, the locomotive this RailRoad model is based on started life in January 1961 as D6705, going new to Stratford depot in London.  After becoming 37005 under TOPS, it was rebuilt as a Class 37/5 in April 1985, which included replacing its EE generator with a new Brush unit, and a complete re-wire, with a consequent renumbering to 37501. It was then painted into its distinctive British Steel pale blue colour scheme, gaining Thornaby Kingfisher motif and British Steel logos. It was then named ‘Teesside Steelmaster’ in 1987.  It was later modified for the proposed Channel Tunnel sleeper ‘Nightstar’ project (which was later aborted) to become a 37/6 in February 1995 and renumbered to 37601. It is currently one of six Class 37s leased by Rail Operations Group from Europhoenix for contracted movement of passenger stock, including EMUs. It was returned to its 1987 guise during a repaint in 2025.  This RailRoad model locomotive is a durable design, perfect for model railway beginners, younger enthusiasts, or anyone who enjoys running their trains daily. Plus, it has been pre-fitted with a DCC sound chip for HM7000 control. - DCC HM7000 TXS Sound Fitted - OO Scale

Hornby Railroad: BR Class 47 47749 'Atlantic Collage' RES

Railroad: BR Class 47 47749 'Atlantic Collage' RES This OO gauge model locomotive represents a Class 47 example that emerged from Crewe Works in February 1965 as D1660.  It was allocated to Swansea’s Landore MPD, before being named ‘City of Truro’ at Truro station in June that year. It became 47076 under TOPs, then was reclassified as a 47/4 in November 1984, when it became 47625. In the 1990s, it became part of the RES pool for operating mail and parcels trains and, in November 1995, was modified to 47/7b, with longer-range fuel tanks and equipment for operating with a propelling control vehicle (PCV). It was given the number 47749 and named ‘Atlantic College’. - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: BR Class 47 47787 'Windsor Castle' EWS

Railroad: BR Class 47 47787 'Windsor Castle' EWS Built by Brush, this locomotive started life as D1757 in September 1964 at Cardiff Canton, and, under TOPS, became 47163 in 1974.  It received various modifications between 1976 and 1979 and was reclassified as a 47/4 and renumbered 47610 in April 1984. It was renumbered and again in April 1989, when it became a 47/8 and was given the number 47823, before becoming 47787 as part of the EWS fleet and being named ‘Windsor Castle’. Previously, it had carried the names ‘SS Great Britain' and ‘Victim Support’. It became part of the West Coast Railways operation at Carnforth in February 2007.  Our Class 47 RailRoad model faithfully depicts this locomotive in its EWS form, with added features for enhanced durability. - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: BR Class 47 47787 'Windsor Castle' EWS (Sound Fitted)

Railroad: BR Class 47 47787 'Windsor Castle' EWS (Sound Fitted) Built by Brush, this locomotive started life as D1757 in September 1964 at Cardiff Canton, and under TOPS became 47163 in 1974.  It received various modifications between 1976 and 1979 and was reclassified as a 47/4 and renumbered 47610 in April 1984. It was renumbered again in April 1989, when it became a 47/8 and was given the number 47823, before becoming 47787 as part of the EWS fleet and being named ‘Windsor Castle’. Previously, it had carried the names ‘SS Great Britain' and ‘Victim Support’. It became part of the West Coast Railways operation at Carnforth in February 2007.  Our Class 47 RailRoad model faithfully depicts this locomotive in its EWS form, with added features for enhanced durability and a pre-fitted sound chip for authentic railway sounds. - DCC Sound Fitted (HM7000) - OO Scale

Hornby Railroad: BR Class 60 60038 'Avesta Polarit' EWS

Railroad: BR Class 60 60038 'Avesta Polarit' EWS  A growth in demand in the heavy haulage sector led to a review of BR’s available motive power in the 1980s.  With 185 locomotives of the Type 5, 3,000+ horsepower category available, made up of its Classes 56 and 58, it was clear that more would be needed, and BR put out an invitation to tender for new locomotives in 1987. The 100 locomotive order was awarded to Brush in Loughborough, and these entered service between 1989 and 1993. No.60038 was named ‘Bidean nam Bian’ after the Scottish ‘Munro’ in Glen Coe.  With BR’s trainload freight business broken up into shadow franchises, the locomotive became part of Loadhaul, based in the north-east. By 1996, this had become part of EWS and 60038 was named 'Avesta Polarit' after the steel making company, at the DFDS Immingham sea terminal on 19th March 2002. It is now one of 14 owned by DC Rail and currently in store.  Our RailRoad model is an accurate replica of this Class 60 locomotive, with high detail and design features for enhanced durability. Product features: Design based on extensive research and original drawings HM7000-21 Pin decoder compatible Space for a additional R7408 Enhanced Bass Speaker Working directional lights All wheel electrical pickup NEM couplings Brass axle bearings Separately fitted handrails, horns and exhaust - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: BR Class 08 08256 BR Blue (Sound Fitted)

Railroad: BR Class 08 08256 BR Blue (Sound Fitted) A total of 996 of the diesel electric shunters were built at various BR works between 1952 and 1962. As the standard BR general-purpose diesel shunter, the type became a common sight at major stations and freight yards across the country.  The locomotive this example is based on started life as 13326 in November 1956, having been completed at Darlington, and was new to New England, Peterborough. It later served at Sheffield Darnall, Tinsley, Finsbury Park, Hitchin, Startford and finally, from May 1968 at Colchester, from where it was withdrawn in February 1984. It was cut-up at Doncaster Works by January the following year.  Our RailRoad range is more durable than our standard range, making it perfect for beginners, children, and the most enthusiastic of model railway runners. Plus, it's been pre-fitted with a DCC sound chip for HM700 control. - DCC Sound Fitted (HM7000) - OO Scale

Hornby Railroad: BR Class 37 37422 'Pegasus' Swietelsky (Sound Fitted)

Railroad: BR Class 37 37422 'Pegasus' Swietelsky Rail Services (Sound Fitted)  Originally new from Vulcan Foundry in February 1965 as D6966, the locomotive this RailRoad model is based on became 37266 under the TOPS numbering system in 1974.  Its career started at Tinsley, Sheffield and it also had postings at Stratford and Landore under BR. In January 1986 it was reclassified to 37/4 and renumbered 37422. The locomotive has worn several liveries and had several different operators, including EWS, DB Schenker, and DRS. It became part of the Harry Needle Railroad Company spot hire fleet based at Barrow Hill, which was taken over by Swietelsky, an Austrian-based railway construction and maintenance contractor, in January 2025. The locomotive was named ‘Pegasus’ later the same year.  This OO gauge locomotive version is pre-fitted with a sound chip for the most authentic model railway experience. - DCC HM7000 TXS Sound Fitted - OO Scale

Hornby Railroad: BR Class 08 08256 BR Blue

Railroad: BR Class 08 08256 BR Blue A total of 996 of the diesel electric shunters were built at various BR works between 1952 and 1962. As the standard BR general-purpose diesel shunter, the type became a common sight at major stations and freight yards across the country.  The locomotive this model example is based on started life as 13326 in November 1956, having been completed at Darlington, and was new to New England, Peterborough. It later served at Sheffield Darnall, Tinsley, Finsbury Park, Hitchin, Startford and finally, from May 1968 at Colchester, from where it was withdrawn in February 1984. It was cut-up at Doncaster Works by January the following year.  Our RailRoad range is more durable than our standard range, making it perfect for beginners, children, and the most enthusiastic of model railway runners. - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: Class 3F 'Jinty' Hart and Weaver Limited No.5

Railroad: Class 3F 'Jinty' Hart and Weaver Limited No.5 The LMS ‘Jinties’ were used widely for shunting and station pilot duties and were so versatile, they were even capable of running at speeds of up to 60mph. When the first diesel shunters started to be introduced, surplus ‘Jinties’ were sold to industrial users and some received bright liveries, such as this fictitious, but highly attractive, blue ‘Hart & Weaver’ livery.  This OO gauge RailRoad model of "Jinty" No.5 is perfect for shunting your industrial sidings. - DCC Ready 6-Pin Socket - OO Scale

Hornby Railroad: GWR County 1013 'County of Dorset' BR Lined Green

Railroad: GWR County 1013 'County of Dorset' BR Lined Green  The ‘County’ Class was the last of the GWR-designed two-cylinder 4-6-0s, with 30 built at Swindon between 1945 and 1947 to the design of Chief Mechanical Engineer, Frederick Hawksworth.  ‘County of Dorset’ entered service in February 1946 and spent most of its early years in the West Country at Bristol, Plymouth, Truro and Penzance, before transferring to Shrewsbury in December 1951. Its final move was to Swindon in September 1963, from where it was withdrawn in July the following year and scrapped at Cashmore’s yard in Newport, South Wales.  Our OO gauge RailRoad replica model locomotive is a detailed, yet durable, version of the Country Class, bringing the 'County of Dorset' to your model railway collection. - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: BR Class 8 71000 'Duke of Gloucester' (Sound Fitted)

Railroad: BR Class 8 71000 'Duke of Gloucester' BR Lined Green (Sound Fitted) Built as the replacement for ‘Princess Royal’ Class 4-6-2 46202 ‘Princess Anne’, which was destroyed in the Harrow and Wealdstone rail disaster of 1952, the Riddles-designed ‘Pacific’ was intended as the first of a new batch of modern locomotives that would serve BR for many years to come.  Completed at Crewe in 1954, plans to build more were turned down by the Railway Executive because the design was too expensive and complex. As a result, ‘Duke of Gloucester’ remained unique, with its three-cylinder configuration and Caprotti rotary cam-driven valve gear. It had an operational life of just eight years, being withdrawn in 1962.  One of its cylinders was saved for display in the National Railway Museum, while the other was removed to balance the locomotive before going for scrap in South Wales. It was, however, saved in 1974 and a restoration lasting 13 years ensued, including building new cylinders from scratch. When it returned to steam it became a regular on the main line and, during 2025, returned from its latest overhaul, once again hauling steam specials to the delight of enthusiasts.  This model locomotive replica of the Class 08 'Duke of Gloucester' beautifully emulates this famous machine and is pre-fitted with HM7000 sound. - DCC HM7000 TXS Sound Fitted - OO Scale  

Hornby Railroad: BR Class 8 71000 'Duke of Gloucester' BR Lined Green

Railroad: BR Class 8 71000 'Duke of Gloucester' BR Lined Green Built as the replacement for ‘Princess Royal’ Class 4-6-2 46202 ‘Princess Anne’, which was destroyed in the Harrow and Wealdstone rail disaster of 1952, the Riddles-designed ‘Pacific’ was intended as the first of a new batch of modern locomotives that would serve BR for many years to come.  Completed at Crewe in 1954, plans to build more were turned down by the Railway Executive because the design was too expensive and complex. As a result, ‘Duke of Gloucester’ remained unique, with its three-cylinder configuration and Caprotti rotary cam-driven valve gear. It had an operational life of just eight years, being withdrawn in 1962. One of its cylinders was saved for display in the National Railway Museum, while the other was removed to balance the locomotive before going for scrap in South Wales.  It was, however, saved in 1974 and a restoration lasting 13 years ensued, including building new cylinders from scratch. When it returned to steam it became a regular on the main line and during 2025 returned from its latest overhaul, once again hauling steam specials to the delight of enthusiasts.  Bring the spirit of 'Duke of Gloucester' back to life with this OO gauge Class 08 RailRoad model locomotive. - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: Class 395 395005 Southeastern High Speed Train Pack

Railroad: Class 395 395005 Southeastern High Speed Train Pack Known as ‘Javelins’, these Class 395 trains are dual-voltage EMUs built as part of the Hitachi ‘AT300’ family for high-speed commuter services operated by Southeastern.  Introduced from June 2009, they are typically formed of six cars, though they can quickly be coupled together to form 12-cars when required. Based at Ashford and Ramsgate, there are currently 29 six-car sets in service. They can be found on services on High Speed 1, the North Kent Line, South Eastern Main Line, Chatham and Kent Coast lines, and the Ashford-Ramsgate line.  Our RailRoad model Train Pack brings the magic of the 'Javelins' to life on your OO gauge layout. - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: Class 57 57306 GBRf

Railroad: Class 57 57306 GBRf - OO Scale - 21 pin DCC Ready

Hornby Railroad: Class 57 57306 GBRf (Sound Fitted)

Railroad: class57 57306 GBRf (sound fitted) - OO scale - DCC TXS Sound Fitted (requires DCC or HM7000 App to operate)   -  NEM Tension Lock

Hornby Railroad: Class 803 803001 Lumo Train Pack

Railroad: Class 803 803001 Lumo Train Pack  Lumo are an open-access operator owned by FirstGroup running train services between London King’s Cross and Edinburgh Waverley using a fleet of Hitachi AT300 Class 803 electric multiple units.  Five sets are currently operated, each of five cars, with a single class of accommodation throughout. Built in 2020/1 and based on the successful Class 800 IEP ‘Azuma’ design, these units don’t have auxiliary diesel engines, but instead carry batteries intended to power on-board facilities in case of overhead power failure. In December 2024, FirstGroup announced that it was acquiring a further 14 of the five car units for its expanding operations.  This RailRoad model Train Pack brings the Lumo Class 800 to life on your layout. - DCC Ready 21-Pin Socket - OO Scale

Hornby Class 802/3 802301 'Amy Johnson' Hull Trains Pack

Class 802/3 802301 'Amy Johnson' Hull Trains Pack  In 2019, Hull Trains launched a poll to find suggestions for naming its five Class 802-3 ‘Paragon’ trains.  As a result, set 802301 was named ‘Amy Johnson’ after the Hull-born pioneering pilot who became the first woman to fly solo between London and Australia in the 1930s, setting many long-distance flying records. This unit was the first of Hull Trains’ Class 802-3 bi-mode units, entering service on 25th November 2019. The five 5-car sets work express services between Hull and London King’s Cross. Our OO model Train Pack is a fantastic replica of this modern design, with HM7000 capability if you add a 21-pin decoder (sold separately). - DCC Ready 21-Pin Socket - OO Scale

Hornby BR Class 43 HST EMR 43274 & Intercity Swallow 43102 Pack

BR Class 43 HST EMR 43274 & Intercity Swallow 43102 Pack  This hybrid train pack represents the final months of HST operation with East Midland Railway in 2021, when 43274 became the first and only Class 43 to carry the interim EMR purple aubergine livery. Owned by Colas, it is still in service today. Meanwhile, 43102 was turned out in retro InterCity ‘Swallow’ livery in February 2021, recalling its record-setting feat with 43159, when they became the world’s fastest diesel locomotives attaining a speed of 148.5mph in November 1987. Withdrawn in May 2021, it is now part of the National Collection and on display at Shildon.  Our models feature NEM tension lock couplings, with the EMR locomotive sporting a stylish purple livery and the Intercity train painted in the iconic grey and white colours. - DCC Ready 21-Pin Socket - OO Scale

Hornby BR Class 43 HST Virgin West Coast 'Lady in Red' Train Pack

BR Class 43 HST Virgin West Coast 'Lady in Red' Train Pack This Virgin Class 43 HST 'Lady in Red' train pack brings the vibrant red and black livery to your model railway layout, creating quite an impression as it moves around the tracks. This OO gauge locomotive model has NEM tension lock couplings and a 21-pin socket, so you can upgrade to HM7000 control when you are ready.  Virgin Trains won both the InterCity West Coast and InterCity CrossCountry franchises following privatisation of BR, commencing services under its Virgin branding in 1997. It inherited a variety of locomotives and rolling stock from BR, including InterCity 125 HST sets.  Class 43 power car 43093 had been named ‘York Festival 88’ under BR, but was renamed ‘Lady in Red’ in 1997, which it carried until 2003, while 43097 had been called ‘The Light Infantry’ until 1990, but entered service with Virgin CrossCountry without a name. Painted in the company’s red and black livery, with white markings, both later became part of First Great Western’s HST fleet. - DCC Ready 21-Pin Socket - OO Scale

Hornby BR Class 43 HST Virgin West Coast Train Pack (Sound Fitted)

BR Class 43 HST Virgin West Coast 'Lady in Red' Train Pack (Sound Fitted) This Virgin Class 43 HST "Lady in Red' Train Pack brings the bold red branding of Virgin to your model railway layout, ensuring an eye-catching visual as it charges round the track. This OO model locomotive pack features NEM tension lock couplings and is ready-fited with HM7000 sound control, giving you a digital model railway experience.  Virgin Trains won both the InterCity West Coast and InterCity CrossCountry franchises following privatisation of BR, commencing services under its Virgin branding in 1997. It inherited a variety of locomotives and rolling stock from BR, including InterCity 125 HST sets.  Class 43 power car 43093 had been named ‘York Festival 88’ under BR, but was renamed ‘Lady in Red’ in 1997, which it carried until 2003, while 43097 had been called ‘The Light Infantry’ until 1990, but entered service with Virgin CrossCountry without a name. Painted in the company’s red and black livery, with white markings, both later became part of First Great Western’s HST fleet. - DCC HM7000 TXS Sound Fitted - OO Scale

Hornby LNER Flying Scotsman & GWR Pendennis Castle (Australian Tour)

LNER Flying Scotsman & GWR Pendennis Castle (Australian Tour) Train Pack  In 1988, Australia celebrated its bicentenary and, to mark the occasion, the world-famous ‘Flying Scotsman’ was invited to travel from Britain to take part in a series of railtours that were part of the ‘Aus Steam 88’ Festival, arriving in October that year.  Already resident in Western Australia since 1977, in the care of the Pilbara Railway Historical Society, former GWR ‘Castle’ Class 4-6-0 ‘Pendennis Castle’ was moved by road to Perth in early 1989 to operate alongside its one-time rival ‘A3’ Class ‘Pacific’. This unlikely reunion occurred almost 9,000 miles from where a week-long locomotive exchange once took place between the LNER and GWR, in April 1925.  This LNER and GWR Train Pack celebrates that landmark event in Australia 37 years ago in 1989. Featuring OO gauge locomotive model replicas of 'Flying Scotsman' and 'Pendennis Castle', these highly detailed designs include sprung metal buffers and NEM tension lock couplings for smooth rake creation. Add a 21-pin decoder to upgrade to HM7000 control. - DCC Ready 21-Pin Socket - OO Scale

Hornby LNER A4 4498 'Sir Nigel Gresley' w/ Figure (Limited Edition)

LNER A4 4498 'Sir Nigel Gresley' w/ Figure (Limited Edition) (150th Anniversary Collection) The LNER Class A4 Sir Nigel Gresley model locomotive is a limited edition model and part of The Great Railway Engineers Collection. This Collection marks 150 years since Sir Gresley's birth, and this locomotive includes a figure.  With a shiny new blue livery and NEM tension lock couplings, this steam locomotive is a wonderful collector's piece.  Entering service with the LNER as 4498 in Garter blue with streamlined side-skirting and red wheels, this was the 100th Gresley ‘Pacific’ to be built when it emerged from Doncaster Works in October 1937. Allocated to King’s Cross ‘Top Shed’ and used on front-line express services such as the prestigious ‘Coronation’ between London and Edinburgh, ‘SNG’ was built with a single chimney and had stainless steel numbers and letters for the tender added at a general overhaul in January 1939.  After a period in wartime black, when the side-skirts were permanently removed, the locomotive returned to lined Garter blue in March 1947. Painted into BR’s express passenger blue in September 1950, as 60007, it set a post-war steam record speed of 112mph on 23 May 1959. Withdrawn in February 1966, by now in BR green, it was saved for preservation by the A4 Locomotive Society. - DCC Ready 21-Pin Socket - OO Scale

Hornby LMS Streamlined 6220 'Coronation' w/ Figure (Limited Edition)

LMS Streamlined 6220 'Coronation' w/ Figure (Limited Edition) (150th Anniversary Collection) The LMS Streamlined 'Coronation' model locomotive is a limited edition item and part of The Great Railway Engineers Collection. This Collection marks 150 years since Sir Stanier's birth, and this locomotive includes a figure. With a shiny bold red livery and NEM tension lock couplings, this steam locomotive is a must-have for collectors. The ‘Princess Coronation’ Class, also known as the ‘Duchess’ Class, was an enlarged and improved version of William Stanier’s successful ‘Princess Royal’ Class ‘Pacific’. The first ten class members emerged from Crewe Works in a streamlined form during 1937 and five of these were put aside specifically for hauling the prestigious ‘Coronation Scot’ between London Euston and Glasgow Central. These were painted in Caledonian blue and had silver horizontal lining, which matched the carriages they pulled. No. 6220 set a new British steam speed record of 114mph in 1937, but this was beaten by the LNER’s ‘Mallard’ in 1938. Built with a single chimney, 6220 was the last of the original 15 to be fitted with a double blast pipe and chimney in 1944. The locomotive’s streamlined casing was removed in November 1946, and it finished its career in its rebuilt form with smoke deflectors as BR’s 46220 in April 1963. - DCC Ready 21-Pin Socket - OO Scale

Hornby Ruston & Hornsby 88DS 97088 Loadhaul (DVLR)

Ruston & Hornsby 88DS 97088 Loadhaul (DVLR) A total of 271 of Ruston & Hornsby’s ‘88DS’ four-wheel diesels were supplied mainly to industrial sites in the UK and overseas, and were rated at 80/88hp. Built in Lincoln between 1938 and 1967, seven of these were also used by BR’s North Eastern Region on departmental duties.  This model is finished in the distinctive ‘Loadhaul’ livery of black and orange. Formed in 1994 as part of the privatisation of BR, Loadhaul Ltd became part of EWS and subsequently DB Cargo. This OO design also features NEM tension lock couplings. - DCC Ready 6-Pin Socket - OO Scale

Hornby Ruston & Hornsby 88DS No.245030 Glenochil Yeast Factory

Ruston & Hornsby 88DS No.245030 Glenochil Yeast Factory Display the bold logo of Glenochil Yeast Factory on this 88DS model locomotive. This diesel features NEM tension lock couplings and a lovely green livery.  The 80/88hp Ruston & Hornsby 4wDM was a reliable machine and ideal for the modest demands of smaller industrial concerns. Several found use in Scotland shunting rail-connected whisky distillery yards – in this case the yeast factory alongside the distillery of the same name, located just south of Menstrie in Clackmannanshire, where sidings connected with the Cambus-Alva branch line.  Works No. 245030 was built in 1947 and worked the factory yard until 1969, when it was sold to William Kerr Ltd in Stirling. It moved to Babcock & Wilcox Ltd., boiler makers in Renfrew, in 1971, where it remained until about 1978, then presumably scrapped. - DCC Ready 6-Pin Socket - OO Scale

Hornby Dublo: English Electric DP1 'Deltic' NRM Preserved

Hornby Dublo: English Electric DP1 'Deltic' NRM Preserved The BR English Electric DP1 'Deltic' is always a favourite model, and with its new blue livery, this OO gauge diesel engine is sure to be just as popular. This version features sprung metal buffers, NEM tension lock couplings and a coreless motor. It is also DCC-ready with a 21-pin socket for easy HM7000 conversion. Features include: High detail OO gauge model based on extensive research Presented as on display in Locomotion, Shildon, with grey chassis, steps and buffers; and horns removed Heavy, fully die-cast chassis and body Highly detailed cab interior Decorated driver controls with illuminated instrument dials Directional head and tail lighting Optional working Mars lights Working cab lights Engine bay lighting Physical switches on blanking plug to control the various lighting configurations Magnetic roof cover to access 21-Pin DCC socket Dual working roof fans, with manually adjustable speed controls Separately fitted etched window frames Large, powerful coreless motor with two flywheels for smooth running Dual bogie drive Sprung metal buffers Front and rear NEM coupling pocket Additional lamps supplied in the accessory bag Hand painted driver figures Supplied with 8 finely decorated etchings, including Locomotion headboard Decorated engine bay featuring printed ‘Napier Deltic’ plates Pre-fitted with a sugar cube speaker for easy digital conversion Space inside for HM7000 Enhanced Bass Speaker Space inside fuel tank for HM7070 - Power Bank Flange squeal sensor mounted in the bogies automatically detects when it is going round a curve to play flange squeal sounds dependant on speed. (Feature available once product is fitted with a HM7000 decoder) Fitted to display plinth with etched presentation plate Fully compatible with Hornby HM7000 app control system, with meticulously crafted Deltic sound profile (SD049) available for download. - DCC Ready 21-Pin Socket - OO Scale

Hornby BR Class 08 08593/D3760 'Colchester TMD' Retro Lined Dark Blue

BR Class 08 08593/D3760 'Colchester TMD' Retro Lined Dark Blue  Add the Class 08 'Colchester TMD' model locomotive to your diesel collection in this elegant blue livery. With sprung metal buffers and NEM tension lock couplings, this is a delightful, highly detailed model.  Built at Crewe Works, this standard 350hp diesel electric shunter started life in November 1959 as D3760 and was allocated to Dannycraig depot at Swansea in South Wales. Under TOPS it was renumbered to 08593 and, in the 1990s, it was reallocated to Colchester where it received a retro-style red-lined BR livery with early ‘cycling lion’ emblem and its old number D3760.  It was also named ‘Colchester TMD’ which was applied in a cursive hand-writing style. It became part of the EWS fleet and, by 2010, it was withdrawn and then stored. It was acquired by Railway Support Services at Wishaw in 2016. - DCC Ready 8-Pin Socket - OO Scale

Hornby BR Class 10 10119 'Margaret Ethel-Thomas Alfred Naylor' BR Blue

BR Class 10 10119 'Margaret Ethel-Thomas Alfred Naylor' BR Blue (GCR Preserved)  This BR Class 10 is a stunning example of a non-standard locomotive, beautifully displayed in OO gauge model form. With sprung metal buffers and NEM tension lock couplings, this blue diesel locomotive is a highly detailled design for your model railway collection.  The BR Class 10 was a variation on the standard BR Class 08 shunter, fitted with Blackstone engines and GEC traction motors. Built at Darlington and Doncaster, 146 were produced between 1955 and 1962, but due to their non-standard nature, they were withdrawn early, between February 1967 and June 1972.  Built as D4067 in 1961 at Darlington, this locomotive initially worked at Darnall, Sheffield, followed by Langwith Junction and Shirebrook. Withdrawn in 1970, it was sold to the NCB and used at Betteshanger Colliery in Kent. It moved to Loughborough in 1980 for preservation and has been numbered 10119 and named after the owner’s parents. - DCC Ready 8-Pin Socket - OO Scale

Hornby BR Class 56 56001 BR Blue (TXS Sound Fitted)

BR Class 56 56001 BR Blue (TXS Sound Fitted) This BR Class 56 model locomotive is pre-fitted with sound and controllable via your HM7000 app for an impressive digital hobby experience. With sprung metal buffers and NEM tension lock couplings, this stylish blue and yellow model is a wonderful addition to your model railway layout.  The 50th anniversary of the completion of the first Class 56 is marked in 2026. The first of the 135-strong class arrived at Harwich from Romania in 1976, before commissioning by BR the following year. Only 30 examples were imported, due to relatively poor build quality, and these were subsequently rebuilt.  The remainder of the class were assembled by BREL at Doncaster and Crewe, with Ashford, Eastleigh, and Swindon supplying sub-assemblies, while Ruston-Paxman supplied the power units. No.56001 was new to Tinsley and withdrawn from Cardiff Canton in September 1996 after 19 years and six months in service with BR. - DCC Sound Fitted (HM7000) - OO Scale

Hornby BR Class 56 56047 Dutch Transrail (TXS Sound Fitted)

BR Class 56 56047 Dutch Transrail (TXS Sound Fitted) This Transrail Class 56 OO gauge model locomotive features a striking grey and yellow livery, with sprung metal buffers and NEM tension lock couplings. The highly detailed model is also pre-fitted with HM7000 sound capability for the most authentic experience.  Built at Doncaster Works, 56047 entered service at Toton in July 1978. Transrail Freight was set up as a trainload freight operator based in St Blazey, Cornwall, formed in 1994 from part of BR’s Trainload Freight division during the privatisation of British Rail. During this period, it acquired a number of Class 56 locomotives, retaining the Dutch-style livery but with the addition of Transrail’s logo and markings.  Transrail was one of a number of main line companies to be bought in 1996 to form new freight operator, English Welsh & Scottish (EWS). It was withdrawn in October 2003 and scrapped at Immingham. - DCC Sound Fitted (HM7000) - OO Scale

Hornby Stainer 5MT 'Black 5' 45473 BR Lined Black (Sound/Smoke Fitted)

Stainer 5MT 'Black 5' 45473 BR Lined Black (Sound/Smoke Fitted) The latest addition to our fleet of LMS Class 5MT model locomotives features our innovative steam generator technology. This highly detailed OO gauge model sends out burst of steam in time with the movement of the wheels for the most realistic running. Fitted with HM7000, it also includes sound and control from your mobile device. With sprung metal buffers and NEM tension lock couplings, this is an impressive locomotive for your model railway layout. History The Wiiliam Stanier-designed Class 5 was introduced in 1934 onto the LMS and by the time the last was built in 1951, the class was 842-strong. No. 45473 was completed at Derby in May 1943, entering service as 5473 and spending much of its working life in Scotland, being part of Perth’s allocation at the time of Nationalisation in 1948 and finishing its career at Dundee Tay Bridge. From there, it was withdrawn in November 1966 and subsequently scrapped at W.H. Arnott, Young at Co. Ltd, Carmyle, Glasgow the following February. Specific to R30475SS Running number 45473 BR Mixed Traffic livery Matt smokebox and cab roof finish. 5MT long wheelbase configuration. Flickering firebox. Fluted die-cast connecting rods. Walschaerts valve gear. Parallel buffer stocks. Common Class 5MT features High detail OO gauge model based on extensive research and original works drawings. Pre-fitted 21-pin HM7000 decoder and speaker. The decoder compatible with NMRA DCC controllers, HM7000 APP control and has the Merchant Navy sound profile pre-installed for accurate locomotive sounds, synchronised with the chuff rate. Pre-fitted Gen 2 steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Die-cast chassis and running plate. Model weight is 360 grams. High detail cab and fully decorated backhead with decorated instrument dials. HM7000 Power Bank compatible. Powerful 5 pole skew wound motor. Illuminated flickering firebox. Illuminated head lamps and tail lamps (can be controlled using a DCC Decoder). Quick release locomotive to tender connector. Pogo pin wheel pickup arrangement for easy pickup servicing. Electrical pickups on main drive wheels and tender wheels. Die-cast connecting rods and valve gear. Prototypical size metal handrails with brass stanchions. Brass main drive bearings. Opening cab roof vent. Adjustable cab doors. Sprung metal buffers. Front and rear NEM coupling pocket. Accessory bag contains tablet catcher, vacuum pipes, lamps and couplings. Separately fitted lamps. Lamp code can be changed. Separately fitted simulated coal load. - DCC HM7000 TXS Sound Fitted w/ Smoke - OO Scale

Hornby Stanier 5MT 'Black 5' 45055 BR Lined Black (Early)

Stanier 5MT 'Black 5' 45055 BR Lined Black (Early)  Completed in November 1935, this ‘Black Five’ was built at Vulcan Foundry, near Newton-le-Willows in Lancashire.  It spent most of its working career in north-west England and North Wales, though in 1966 it had brief allocations at West Hartlepool and York, before moving back to the Liverpool area and serving at Bank Hall and then Aintree. It almost lasted to the end of steam, withdrawal coming a month shy on 6th July 1968 from Lostock Hall, Preston, with scrapping the following February.  This OO gauge locomotive model features sprung metal buffers and NEM tension lock couplings, and can be upgraded to HM7000 control with a 21-pin decoder (sold separately). Details: Running number 45055 BR Mixed Traffic livery Matt smokebox and cab roof finish 5MT long wheelbase configuration Flickering firebox Fluted die-cast connecting rods Walschaerts valve gear Parallel buffer stocks Features: High detail OO gauge model based on extensive research and original works drawings Die-cast chassis and running plate. Model weight is 360 grams High detail cab and fully decorated backhead with decorated instrument dials HM7000 21-Pin Decoder socket HM7000 Power Bank compatible Powerful 5 pole skew wound motor Illuminated flickering firebox Illuminated head lamps and tail lamps (can be controlled using a DCC Decoder) Quick release locomotive to tender connector Pogo pin wheel pickup arrangement for easy pickup servicing Electrical pickups on main drive wheels and tender wheels Die-cast connecting rods and valve gear Prototypical size metal handrails with brass stanchions Brass main drive bearings Opening cab roof vent Adjustable cab doors Sprung metal buffers Front and Rear NEM coupling pocket Accessory bag contains tablet catcher, vacuum pipes, lamps and couplings Separately fitted lamps. Lamp code can be changed. Separately fitted simulated coal load. - OO Scale

Hornby SECR H Class 161 SECR Green

SECR H Class 161 SECR Green This OO gauge SECR H Class locomotive model is a faithful representation of Harry Wainwright's H Class. With sprung metal buffers and NEM tension lock couplings, this model is DCC ready with an 8-pin socket ready for upgrading to digital control.  Designed by Harry Wainwright, 66 of these locomotives were built for the South Eastern & Chatham Railway at its Ashford Works between 1904 and 1915 for London suburban and semi-fast trains. Completed in June 1909, 161 engines carried the elaborate SECR livery, like the locomotive depicted by the model, until receiving a lined olive green livery when taken into SR stock and renumbered 1161 at the Grouping in 1923.  It later became BR 31161 and was withdrawn at Tunbridge Wells West in November 1961 after a creditable 51 years and 5 months’ service - DCC Ready 6-Pin Socket - OO Scale

Hornby LNER K1 2005 LNER Apple Green (Preserved)

LNER K1 2005 LNER Apple Green (Preserved) The LNER K1 Class is a must-have addition to your steam model railway. With sprung metal buffers and NEM tension lock couplings, you can upgrade to DCC control by adding a 21-pin decoder (sold seperately).  The ‘K1s’ were useful and versatile engines, working extensively across former LNER territory, but were mostly associated with north-east England and also the West Highland Line to Fort William and Mallaig.  No. 62005 was the final member of the 70-strong class to remain in service, being withdrawn from Leeds Holbeck in December 1967. Though it survives today in preservation, it was initially acquired as a source of spares for already-preserved ‘K4’ 3442. However, in 1972 it was donated to the North Eastern Locomotive Preservation Group and based at the North Yorkshire Moors Railway, where it was restored in its own right, returning to steam in 1975. - DCC Ready 21-Pin Socket - OO Scale

Hornby LNER K1 62046 BR Lined Black (Early)

LNER K1 62046 BR Lined Black (Early) Add a BR (Early) K1 Class locomotive to your model railway layout today. This stylish OO steam engine features sprung metal buffers and NEM tension lock couplings, and you can upgrade to DCC control by adding a 21 pin decoder (sold seperately).  Built in 1949/50, after the formation of BR in 1948, but to an LNER design that was instigated by Edward Thompson, with the conversion of a three-cylinder ‘K4’ at Darlington in 1945, the two-cylinder ‘K1s’ were much modified by Thompson’s successor as Chief Mechanical Engineer, Arthur H Peppercorn. No.62046 emerged from the North British Locomotive Works in Glasgow in October 1949 and was first allocated to Darlington shed. After a reallocation to York (North) in June 1956, the locomotive ended its career there in February 1967 and was scrapped by Hughes Bolckow at Blyth during April. - DCC Ready 21-Pin Socket - OO Scale

Hornby LNER P2 2004 'Mons Meg' LNER Apple Green

LNER P2 2004 'Mons Meg' LNER Apple Green 'Mons Meg' is a stunning example of one of Nigel Gresley's P2 engines, sporting a stylish green livery. It has sprung metal buffers and NEM tension lock couplings, with a 21-pin socket ready for upgrade to HM7000 control.  Nigel Gresley designed the P2s for hauling heavy express trains along the demanding route between Edinburgh and Aberdeen. Six were introduced between 1934 and 1936. The first three locomotives differed in appearance, the third having the wedge-shaped front similar to the A4s which was adopted for the remainder of the class. The first two also later converted.  Even then, 2004 was fitted with an experimental butterfly valve blastpipe bypass and the last two also had design differences, meaning that none of the six were built the same. All were subsequently rebuilt by Thompson as conventional Pacifics in 1943/4 by Gresley’s successor, Edward Thompson. - DCC Ready 21-Pin Socket - OO Scale  

Hornby LNER A4 4468 'Mallard' LNER Garter Blue (Sound/Smoke Fitted)

LNER A4 4468 'Mallard' LNER Garter Blue (Sound/Smoke Fitted) One of the most famous of all steam locomotives, ‘Mallard’ still holds the world speed record for steam. In July 1938, it reached 126mph on Stoke Bank. Entering service in March of that year in LNER Garter blue, it had full side valances and red wheels, as depicted by our highly detailed model. It was renumbered 22 in 1946, by which time it carried wartime plain black. When it was withdrawn from King’s Cross in April 1963, it was in lined BR green and numbered 60022. The locomotive is preserved in its original livery at the National Railway Museum in York. 'Mallard' has always been one of our most popular models. In 2026, we have given the A4 a tooling update and the model now includes the new Hornby steam generator technology, working headlights and tender lights. Specific to R30551SS Running number 4468 Lined Garter Blue livery Non-corridor tender Double chimney arrangement Valanced streamline body made from die-cast metal LHD cab arrangement Working headlights Working tender lights Common Class A4 features High detail OO gauge model based on extensive research and original works drawings Die-cast chassis and boiler High detail cab and fully decorated backhead with decorated instrument dials Pre-fitted 21-pin HM7000 decoder and speaker. The decoder is compatible with NMRA DCC controllers, HM7000 APP control and has the Class A4 sound profile pre-installed for accurate locomotive sounds, synchronised with the chuff rate. Pre-fitted steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Adjustable steam output settings via the decoder HM7000 Power Bank compatible Powerful 5 pole skew wound motor Illuminated flickering firebox Quick release locomotive to tender connector Pogo pin wheel pickup arrangement for easy pickup servicing Electrical pickups on main drive wheels and tender wheels Fully decorated crew figures Turned brass safety valve Prototypical size metal handrails with brass stanchions Brass main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Separately fitted simulated coal load. - DCC HM7000 TXS Sound Fitted w/ Smoke - OO Scale

Hornby LNER B12 61516 BR Lined Black (Late)

LNER B12 61516 BR Lined Black (Late)  A shining replica of the BR B12 Class, this OO gauge model is highly detailed, with sprung metal buffers and NEM tension lock couplings. Upgrade to HM7000 with a 21-pin decoder (sold seperately).  Stephen D Holden designed the ‘S69’ inside cylinder 4-6-0s for the Great Eastern Railway. First introduced in 1911, it was the last of 71 built before the Grouping appeared in 1921. However, a further ten were constructed by Beyer, Peacock for the LNER in 1928, by which time they had been designated the ‘B12’ Class.  Built at Stratford Works in 1913, 1516 entered traffic on GER expresses out of London’s Liverpool Street station in the November. In 1924, it was renumbered 8516, then 1516 under the LNER’s 1947 renumbering scheme. A year later it became BR’s 61516 and was withdrawn from Cambridge in July 1958. - DCC Ready 8-Pin Socket - OO Scale

Hornby LNER B12 8572 LNER Apple Green

LNER B12 8572 LNER Apple Green  This locomotive was one of the final batch of ten ‘B12s’ built by Beyer, Peacock in Manchester in 1928. It was renumbered 1572 by the LNER in 1946, but soon became BR’s 61572 in 1948.  Withdrawn from Norwich Thorpe in September 1961, it was acquired by the Midland & Great Northern Joint Railway Society and moved to the nascent North Norfolk Railway at Sheringham in 1967, where, since completion of its overhaul in 1995, it has been a mainstay of heritage services.  The original is currently out of ticket, undergoing overhaul, so the model is presented in as-preserved condition – the only surviving example of a British inside-cylinder 4-6-0. This highly detailed model features sprung metal buffers and NEM tension lock couplings for effortless rake-building. - DCC Ready 8-Pin Socket - OO Scale  

Hornby L&MR Robert Stephenson’s 'Rocket'

L&MR Robert Stephenson’s 'Rocket'  For the first time, Stephenson's Rocket is presented as a solo locomotive, with a sleek yellow livery, fixed metal buffers and chain couplings. This highly detailed, diminuitive locomotive model is a must-have model for steam collectors, due to its historical importance and incredible model engineering.  This historically important locomotive was built in 1929 to participate in the Rainhill Trials, a competition set-up by the promoters of the Liverpool and Manchester Railway to find suitable motive power for its opening the following year. Built to the order of his father George (who was the L&MR’s principal engineer at the time), ‘Rocket’ was designed by Robert Stephenson and built at his Forth Street Works in Newcastle-upon-Tyne.  The design was the most advanced in its day and ‘Rocket’ won the Trials. The locomotive then became one of four that took part in the L&MR’s opening parade in September 1930. - DCC Ready 6-Pin Socket - OO Scale

Hornby GWR Castle Class 5071 'Spitfire' BR Lined Green (Early)

GWR Castle Class 5071 'Spitfire' BR Lined Green (Early)  This locomotive entered service with the GWR at Newton Abbot in June 1938, initially named ‘Clifford Castle’, but this was changed to 'Spitfire' during the Second World War following the aeroplane’s pivotal role in the Battle of Britain during 1940.  It then spent most of its career shedded in the West Country, though after nationalisation, it had spells in the late 1950s at Gloucester and Worcester. The locomotive was fitted with a double chimney and four-row superheater in June 1959, before moving to St. Philip’s Marsh, Plymouth in February 1962, from where it was withdrawn in October 1963.  This detailed OO gauge model depicts 5071 in its original form, with a smart green livery. It also features sprung metal buffers, NEM tension lock couplings and a 21-pin socket, ready for upgrade to HM7000. - DCC Ready 21-Pin Socket - OO Scale

Hornby GWR Large Prairie 51xx Class 5153 BR Lined Green (Late)

GWR Large Prairie 51xx Class 5153 BR Lined Green (Late) Our highly detailed Large Prairie Locomotives feature sprung metal buffers and NEM tension lock couplings for smooth running and effortless rake creation. This Class 5101 model sports a lovely green livery and is a delightful addition to any steam collection.  Designed for suburban and local passenger services, 140 of these large ‘Prairies’ were built at Swindon between 1929 and 1949. These locomotives were a development of Churchward’s 1903 ‘31XX/51XX’ Class overseen by GWR Chief Mechanical Engineer, Charles Collett. New to Chester West shed, 5153 entered service in March 1930 and enjoyed a career that lasted almost 35 years.  After moving to Newton Abbot in the 1940s, it had a spell at Kidderminster before reaching Leamington in 1964, which was its final shed, withdrawal coming just three months later. It was scrapped in June 1965. - DCC Ready 8-Pin Socket - OO Scale

Hornby GWR Large Prairie 61xx Class 6126 British Railways Green

GWR Large Prairie 61xx Class 6126 British Railways Green A lovely addition to any OO gauge layout, this BR Class 61XX Large Prairie Locomotive is gorgeous in green. With sprung metal buffers and NEM tension lock couplings, this is a deligtful, highly detailed steam locomotive.  The ‘61XX’ Class was a direct development of the earlier ‘5101’ Class by Charles Collett, with a total of 70 locomotives turned out at Swindon Works between 1931 and 1935. The main difference was an increase in boiler pressure, which was raised to 225psi and gave a consequent increase in tractive effort.  No. 6126 entered service in October 1931 and spent much of its career based along the main Paddington to Bristol line, with postings at Slough, Southall, Reading, and Didcot. Its last shed was Oxford from May 1964, where it was withdrawn in December 1965 and sent for scrapping at Cashmore’s in Newport. - DCC Ready 8-Pin Socket - OO Scale

Hornby BR Standard Class 9F 92031 BR Black (Early)

BR Standard Class 9F 92031 BR Black (Early) The smart black BR (Early) Class 9F makes a wonderful OO gauge model locomotive addition to your collection. With sprung metal buffers and NEM tecnsion lock couplings, this model is DCC ready with a 21-pin socket. New to March in Cambridgeshire in November 1954, 92031 was one of 251 ‘standard’ heavy freight locomotives built to the design of Robert Riddles between January 1954 and March 1960. Its working career took it to allocations at New England (Peterborough), Annesley, Westhouses and Newton Heath, Manchester, from where it was withdrawn in January 1967 after an incredibly short working life of just 12 years and almost two months. Scrapped at T.W. Ward at Killamarsh, near Sheffield, the locomotive was always paired with a standard BR1F tender. - DCC Ready 21-Pin Socket - OO Scale

Hornby BR Rebuilt Merchant Navy 35028 'Clan line' BR Green (Preserved)

BR Rebuilt Merchant Navy 35028 'Clan line' BR Lined Green (Preserved) The BR Rebuilt Merchant Navy 'Clan Line' is back in OO model form. This newly tooled model locomotive has sprung metal buffers and NEM tension lock couplings and is a highly detailed replica of a popular steam engine. One of the last of its class to be built, this locomotive was completed after nationalisation of Britain’s railways to Bulleid’s Southern ‘Merchant Navy’ design, complete with streamlined casing and chain-driven valve gear, entering service in December 1948. It didn’t receive its name until January 1951, during a ceremony at Southampton Docks. Like all 30 members of the class, ‘Clan Line’ was rebuilt, in its case, during 1959, and remained in service until withdrawal from Nine Elms, London in July 1947. It was subsequently saved privately for preservation and is a regular main line performer, once hauling the prestigious Belmond British Pullman. MODEL SPECIFICATION Die-cast chassis, pony truck and trailing truck Die-cast boiler and running plate Merchant Navy Bullied-Firth-Brown wheels High detail cab and fully decorated backhead with decorated instrument dials Powerful 5 pole skew wound motor with cardan shaft and flywheel Flywheel with cardan shaft arrangement for smooth running Pogo pin wheel pickup arrangement for easy pickup servicing Die-cast connecting rods and valve gear Oilite main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Optional fit rear flanged wheelset. Only recommended for larger layouts with sweeping curves or for display purposes Wheel pickups on the main locomotive and tender wheelsets Separately fitted simulated coal load. TOOLING High detail OO gauge model based on extensive research, 3D scanning and original works drawings Cast trailing truck Modern 6000 gallon tender with additional pump, air tanks and battery arrangement for main line running (as preserved) Opening cab roof vent DCC Fitted with a 21-pin decoder socket Flickering firebox Working cab light MCU controlled electric front lamps for full lamp code control Working tender lamps Eight-way locomotive to tender connection LIVERY BR Lined Green livery - OO Scale

Hornby BR Rebuilt Merchant Navy 35028 'Clan line' BR Green(Sound/Smoke)

BR Rebuilt Merchant Navy 35028 'Clan line' BR Lined Green (Sound/Smoke Fitted) The BR Rebuilt Merchant Navy 'Clan Line' is back in OO model form. This newly tooled model locomotive has sprung metal buffers and NEM tension lock couplings and is a highly detailed replica of a popular steam engine. One of the last of its class to be built, this locomotive was completed after nationalisation of Britain’s railways to Bulleid’s Southern ‘Merchant Navy’ design, complete with streamlined casing and chain-driven valve gear, entering service in December 1948. It didn’t receive its name until January 1951, during a ceremony at Southampton Docks. Like all 30 members of the class, ‘Clan Line’ was rebuilt, in its case, during 1959, and remained in service until withdrawal from Nine Elms, London in July 1947. It was subsequently saved privately for preservation and is a regular main line performer, once hauling the prestigious Belmond British Pullman. Please Note: this model requires a DCC controller or the HM7000 app to control.  Specific to R30490SS: STEAM GENERATOR Pre-fitted steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Adjustable steam output settings via the decoder Water reservoir for up to 20 minutes continuous steam running MODEL SPECIFICATION Die-cast chassis, pony truck and trailing truck Die-cast boiler and running plate Merchant Navy Bullied-Firth-Brown wheels High detail cab and fully decorated backhead with decorated instrument dials Powerful 5 pole skew wound motor with cardan shaft and flywheel Flywheel with cardan shaft arrangement for smooth running Pogo pin wheel pickup arrangement for easy pickup servicing Die-cast connecting rods and valve gear Oilite main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Optional fit rear flanged wheelset. Only recommended for larger layouts with sweeping curves or for display purposes Wheel pickups on the main locomotive and tender wheelsets Separately fitted simulated coal load. TOOLING High detail OO gauge model based on extensive research, 3D scanning and original works drawings Cast trailing truck Modern 6000 gallon tender with additional pump, air tanks and battery arrangement for main line running (as preserved) Opening cab roof vent DCC Fitted with a 21-pin decoder socket Flickering firebox Working cab light MCU controlled electric front lamps for full lamp code control Working tender lamps Eight-way locomotive to tender connection LIVERY BR Lined Green livery - OO Scale

Hornby Battle of Britain Class (Rebuilt) 34053 '303 Squadron' BR Green

Battle of Britain Class (Rebuilt) 34053 '303 Squadron' BR Lined Green The BR Battle of Britain Class '303 Squadron' model locomotive brings military pride to your model railway layout. With sprung metal buffers and NEM tension lock couplings, you can upgrade this OO model to HM7000 control by adding a 21-pin decoder (sold seperately).  This locomotive was built in 1947 at the SR’s Brighton Works as 21C153 and named ‘Sir Keith Park’. It was built to Bulleid’s three-cylinder air-smoothed design with chain drive and an oil-bath for lubrication. Along with many of its classmates, it was rebuilt to Jarvis’ more conventional design with air smooth casing removed and Walschaerts valve gear fitted.  Withdrawn in 1965, it was later rescued from Barry scrapyard and returned to steam by Southern Locomotives Ltd. In 2024, it was temporarily renamed ‘303 Squadron’ at the Spa Valley Railway in honour of the Polish fighter squadron that fought in the Battle of Britain. - DCC Ready 21-Pin Socket - OO Scale

Hornby Sovereign Pullman Train Set (TXS Sound/Smoke Fitted)

Sovereign Pullman Train Set (TXS Sound/Smoke Fitted) A masterpiece of British steam engineering reimagined for the modern railway enthusiast. This premium OO gauge train set captures the elegance and power of the legendary A4 Class locomotive, complete with authentic sound, illuminated headlamps and a realistic steam generator. Paired with three exquisitely detailed Pullman coaches featuring interior lighting and glowing table lamps, the set evokes the golden age of luxury rail travel. A double-circuit track layout with siding gives you room to expand, while mains power and Bluetooth control via the free Hornby HM7000 app delivers smooth, intuitive operation from your smartphone or tablet. This is a statement set for those who value heritage, detail and cutting-edge control. Please Note: This set requires the use of the HM7000 free to download APP for control. Includes: A high quality presentation case pull-out draws. A 3rd and 2nd radius loop of track with siding and buffer stop. Points are pre-fitted with point clips for full layout power and control. HM7000 power cable to provide track power. Hornby TrackMat Rerailer A4 Locomotive – Sir Nigel Gresley High detail OO gauge model based on extensive research and original works drawings. Heavy die-cast chassis Running number 60007 BR Pussian Blue Corridor tender Double chimney arrangement. Un-valanced streamline plastic body. LHD cab arrangement. Working headlights Working tender light. High detail cab and fully decorated backhead with decorated instrument dials. Pre-fitted 21-pin HM7000 decoder and speaker. The decoder is compatible with NMRA DCC controllers, HM7000 APP control and has the Merchant Navy sound profile pre-installed for accurate locomotive sounds, synchronised with the chuff rate. Pre-fitted steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Adjustable steam output settings via the decoder. HM7000 Power Bank compatible. Powerful 5 pole skew wound motor. Illuminated flickering firebox. Quick release locomotive to tender connector. Pogo pin wheel pickup arrangement for easy pickup servicing. Electrical pickups on main drive wheels and tender wheels. Fully decorated crew figures. Turned brass safety valve Prototypical size metal handrails with brass stanchions. Brass main drive bearings. Sprung metal buffers. Front and rear NEM coupling pocket. Separately fitted simulated coal load. Pullman Coaches – Ione, Lucille & Zena All steel K-Type Pullman Coaches Exquisite decoration with a wealth of separately fitted parts. Working table lamps Sprung metal buffers NEM tension lock couplers Pullman Coach Ione – Kitchen First Pullman Coach Lucille – First Class Parlour Pullman Coach Zena – First Class Parlour - OO Scale

Hornby Railroad: Class 31 31271 'Stratford' Triple Grey Construction

Railroad: Class 31 31271 'Stratford 1840 - 2001' Triple Grey Construction This Hornby RailRoad Class 31 model is presented in the Trainload construction livery, bringing a modern splash of colour to your 00-gauge layout. Based on the reliable Brush Type 2 locomotives, this model features wide-tension lock couplings and moulded plastic. DCC ready, it comes fitted with a 21-pin decoder socket, allowing for easy digital upgrade. History: Originally introduced in the late 1950s, the Class 31s became a familiar sight across the British railway network, known for their versatility and longevity. Locomotive No. 31271, preserved in working order, has seen continued use in the modern era and now wears the vibrant Trainload Construction livery — a striking nod to its role in supporting infrastructure projects across the capital. - OO Scale

Hornby Railroad: Class 37 093 PoliceAdvert (Sound Fitted)

Railroad: Class 37 37093 Police BR 125 Advert (Sound Fitted) Recognised for its memorable role in a television advert – flagging down a speeding HST power car, this highly detailed model of Class 37 No. 37093 comes presented in its unique ‘Police’ promotional livery. Complete with a roof-mounted working blue light and DCC sound-fitted with Class 37 and effects, functions, and an authentic police siren straight out of the box. Equipped with NEM tension lock couplings and plastic buffers, this Co-Co diesel is built to perform on second radius curves or greater. History: Built at English Electric’s Robert Stephenson & Hawthorns works, this locomotive entered BR service as D6793 in 1963, allocated to Gateshead. Re-numbered 37093 in February 1974, it was painted into ‘Police’ livery, complete with blue light, for a BR television advertising campaign in July 1985, before returning to a more traditional livery at Stratford in August. It was renumbered 37509 in June 1986 and in 1989 allocated to the Freight Metals sector Thornaby pool. It finished its career with EWS and was cut up at Cardiff Canton in August 2005. - OO Scale

Hornby Railroad: Class 37 37418 'An Comunn Gaidhealach' Loram (SF)

Railroad: Class 37 37418 'An Comunn Gaidhealach' Loram (Sound Fitted) Finished in the Loram livery, Class 37 No. 37418 ‘An Commun Gaidhealach’ is brought to life in this detailed 00 gauge model.  Fitted with Hornby’s HM7000 21-pin sound decoder it delivers realistic, immersive audio straight from the box and is compatible with DCC and HM7000 App control.  As part of our RailRoad range, this model has been designed with fewer delicate detail parts and more durable detailing, making it better for handling - perfect for beginners or for adding to your existing collection! History: Released into BR traffic from Vulcan Foundry as D6971 on 18 March 1965, this locomotive was first allocated to Cardiff Canton. It was rebuilt as a Class 37/4 and renumbered 37418 in 1985 and transferred to Inverness. It received its unusual name ‘An Commun Gaidhealach’ (The Gaelic Association) at Edinburgh in October 1986, before entering the Provincial General Pool from January 1989.  It was renamed ‘Pectindae’ in April 1992, and then ‘East Lancashire Railway’ in April 1994, eventually being sold to a private owner in 2007 by EWS. It is currently on-hire to freight operator Loram Rail and painted in its livery, the ‘An Commun Gaidhealach’ name being reinstated in February 2024. - OO Scale

Hornby Railroad: Class 37 37419 'Carl Haviland' DRS Compass (SF)

Railroad: Class 37 37419 'Carl Haviland' DRS Compass (Sound Fitted) This sound-fitted Hornby RailRoad Class 37 No. 37419 ‘Carl Haviland’ is presented in Direct Rail Services livery complete with commemorative nameplate. Equipped with a 21-pin decoder preloaded with authentic Class 37 sound profiles, it delivers rich, immersive audio straight from the box.  Detail highlights include separately fitted plastic buffers, NEM tension lock couplings, and an accessory bag for added customisation. Designed to run on second radius curves or greater, this model combines performance, presentation, and sound in one standout locomotive. History: This locomotive entered service with BR in 1965 as D6991 allocated to Cardiff Canton, but was renumbered to 37291 in March 1974. It was rebuilt as a Class 37/4 and renumbered 37419 in 1985 and transferred to Scotland, entering the Provincial General Pool at inverness in 1989.  Reallocated to Thornaby as part of the Railfreight Construction sub-sector the following year, after many moves and sector allocations, it passed via EWS to Direct Rail Services in 2011. Since 2019 it has carried InterCity mainline livery and was named ‘Carl Haviland 1954-2012’.  - OO Scale

Hornby Railroad: Class 47 47306 'The Sapper' Railfreight Distribution

Railroad: Class 47 47306 'The Sapper' Railfreight Distribution A striking and authentic addition to any diesel-era collection, the R30440 Railfreight Distribution Class 47 Co-Co 47306 ‘The Sapper’ is finished in the Railfreight Distribution livery. This detailed model includes separately fitted plastic buffers and NEM coupling pockets. It comes equipped with a 21-pin DCC decoder socket, making it easy to upgrade for digital operation. - 21 pin DCC ready - OO Scale

Hornby Railroad: Class 47 47306 'The Sapper' RFD (Sound Fitted)

Railroad: Class 47 47306 'The Sapper' Railfreight Distribution (Sound Fitted)   - OO Scale - DCC TXS Sound Fitted (requires DCC or HM7000 App to operate) - NEM Tension Lock

Hornby Railroad: Class 31 31271 'Stratford' Construction (Sound Fitted)

Railroad: Class 31 31271 'Stratford 1840 - 2001' Triple Grey Construction (Sound Fitted) This Hornby RailRoad Class 31 model is presented in the Trainload construction livery, bringing a modern splash of colour to your 00-gauge layout. Based on the reliable Brush Type 2 locomotives, this model features wide-tension lock couplings and moulded plastic. DCC ready, it comes fitted with a 21-pin decoder socket, allowing for easy digital upgrade. History: Originally introduced in the late 1950s, the Class 31s became a familiar sight across the British railway network, known for their versatility and longevity. Locomotive No. 31271, preserved in working order, has seen continued use in the modern era and now wears the vibrant Trainload Construction livery — a striking nod to its role in supporting infrastructure projects across the capital. - OO Scale

Hornby Class 67 67015 DB Cargo "Leading the Next Generation"

Class 67 67015 DB Cargo "Leading the Next Generation of Rail Freight" This Class 67 No. 67015 model is finished in the vibrant DB Schenker red livery, reflecting its current use on premium services with Transport for Wales. Fitted with a 21-pin decoder socket, it is DCC ready for easy digital conversion. Sprung metal buffers and NEM couplings provide enhanced realism. With its powerful modern profile and push-pull capability, 67015 makes an ideal addition to any contemporary diesel or mixed-traffic collection. History: Thirty of these locomotives were built for EWS by Alstom in Spain in 1999/2000 as replacements for Class 47s, for use mainly on Royal Mail trains, but after mail contracts were lost in 2003/4 have been used on passenger trains.Transferred to DB Cargo by 2015, 67015 spent a period on lease to Wrexham & Shropshire trains and was named ‘David J. Lloyd’.  It is now one of a dozen leased to Transport for Wales for its premium services, currently running in DB Schenker red, and can be used in push-pull mode with Mk4 coaches and a DVT (Driving Van Trailer). - OO Scale

Hornby BR Class 153 153360 Serco Northern Rail

BR Class 153 153360 Serco Northern Rail The Hornby Class 153 No. 153360 is finished in the distinctive Northern Rail livery, representing its appearance during regular service in the north of England. It is DCC ready with a 21-pin decoder socket for easy digital upgrade and fitted with NEM couplings. History: The Northern Rail franchise commenced in December 2004 and inherited its fleet from those of Arriva Trains Northern and First North Western, including a large number of Class 153 single units, of which No. 153360 was one.  Under Northern Rail, the unit saw considerable use in the Carlisle area, including services on the Settle and Carlisle line and the Cumbria coastal line to Barrow-in-Furness.  Arriva Rail North, Northern Rail’s successor from 2016, operated the largest fleet of Class 153 units in the UK. No. 153360 went into storage in late 2021 and was subsequently scrapped. - OO Scale

Hornby SR Class M7 318 Southern Olive Green

SR Class M7 318 Southern Olive Green This Hornby model of Southern Railway ‘M7’ Class No. 318 is presented in authentic Era 3 condition, reflecting the locomotive’s appearance during its SR service. DCC ready with an 8-pin socket, it offers an easy route to digital control, while sprung metal buffers and NEM couplings ensure realistic detail. A faithful tribute to one of Drummond’s iconic tank engines. History: Dugald Drummond designed the ‘M7’ 0-4-4Ts as a more powerful replacement for the ageing Adams ‘T1’ Class used on the LSWR’s London suburban passenger services, with 105 examples built at Nine Elms (95) and Eastleigh (10) between 1897 and 1911.  No. 318 entered service in August 1900, and kept its number throughout its Southern Railway days until becoming 30318 under BR in 1950. Withdrawal came just nine years later, in December 1959, when it was scrapped. - OO Scale

Hornby LNER Class J52 68846 BR Lined Black (Late)

LNER Class J52 68846 BR Lined Black (Late) Common J13/J52 Features: New Tooling - High detail OO Gauge model based on extensive research and original works drawings. Diecast Boiler, Chassis and Running Plate. Model Weight is 235 grams. High detail cab and fully decorated backhead with decorated instrument dials. Decoder controlled firebox flicker. (decoder sold separately). HM7000 21-Pin sound decoder compatible. HM7000 Power Bank compatible. Powerful 5 Pole Skew wound motor. Pogo pin wheel pickup arrangement for easy pickup servicing. Diecast connecting rods. Prototypical size metal handrails with brass stanchions. Oilite main drive bearings. Opening cab roof vent. Sprung metal buffers. Front and Rear NEM coupling pocket. Rear coupling pocket had a close coupling mechanism. Wheel pickups on all wheels. Accessory bag contains vacuum pipes, lamps and couplings. Separately fitted lamps. Lamp code can be changed. Separately fitted simulated coal load. History: This locomotive entered service as one of Henry Ivatt’s ‘J13’ Class as No. 1247, having been built under contract by Sharp, Stewart in 1899. It became LNER ‘J52’ 4247 at the Grouping in 1923, and later 8846 under the LNER’s 1946 renumbering scheme.  It entered BR service as 68846 and was withdrawn from King’s Cross ‘Top Shed’ in May 1959, at which point it became the first preserved locomotive to be bought directly from BR when it was acquired by Captain W.G. Smith. It is now part of the National Collection and restored as GNR 1247. - OO Scale

Hornby LMS Patriot Class 45540 'Sir Robert Turnbull' BR Green (Early)

LMS Patriot Class 45540 'Sir Robert Turnbull' BR Green (Early) This model of BR ‘Patriot’ Class 4-6-0 No. 45540 ‘Sir Robert Turnbull’ is presented in its post-rebuild condition, reflecting its appearance under British Railways ownership. DCC ready with a 21-pin decoder socket, the locomotive is designed with metal sprung buffers and NEM tension lock couplers. History: This locomotive started out as 5901 when it emerged from Crewe Works in August 1933, but was later renumbered to 5540. It was rebuilt with a Stanier taper boiler in October 1947, which promoted it from power class ‘6P’ to ‘7P’. It became 45540 under BR in May 1948 and survived in service until condemned in April 1963 and was scrapped by July that year.  The locomotive’s name, transferred from withdrawn ‘Large Claughton’ 1161, was in honour of Sir Robert Turnbull, former General Manager of the LNWR, who was knighted in 1913. - OO Scale

Hornby LMS Patriot Class 5514 'Holyhead' LMS Lined Black

LMS Patriot Class 5514 'Holyhead' LMS Lined Black This Hornby model of LMS ‘Patriot’ Class 4-6-0 No. 5514 ‘Holyhead’ is finished in accurate period detail as it appeared in the late 1930s. Designed for reliable performance on OO gauge layouts, the locomotive is DCC ready with a 21-pin decoder socket and if fitted with Metal sprung buffers and NEM tension lock couplers. History: Henry Fowler designed the ‘Patriot’ 4-6-0 for the LMS as an upgrade of the LNWR’s ‘Large Claughton’ Class for express passenger work. Built at both Crewe and Derby Works, 42 and ten respectively, 52 entered service between 1930 and 1934. ‘Holyhead’ was new from Crewe in September 1932, numbered 5983, but this was changed to 5514 in August 1938, as represented by the model.  The locomotive would later be rebuilt with a Stanier taper boiler in 1947, before becoming BR 45514, with withdrawal coming at Derby in May 1961, the first of the rebuilt ‘Patriots’ to be condemned. - OO Scale

Hornby GWR Saint Class 2920 'Saint David' BR Lined Black (Early)

GWR Saint Class 2920 'Saint David' BR Lined Black (Early) Of the 77 Saint Class members built by GWR between 1902 and 1913, 2920 ‘Saint David’ was one of the 47 that survived beyond nationalisation of Britain’s railways in 1948. Part of the third batch of 20 to be built in 1907, the locomotive was new to Cardiff Canton shed. It underwent several changes during its career, including the fitting of a superheated boiler in 1909 and outside steam pipes in December 1932. This model is presented in BR livery, the condition in which it operated through to its withdrawal in October 1953, by which point it was one of the last four still in service. This model was developed with the helpful guidance from the Didcot Railway Center who kindly gave us access to their archive of drawings and access to the Lady of Legend locomotive. The Saint class model features a powerful 5 pole skew wound motor, flickering firebox and is designed to be fully compatible with the HM7000 21-Pin decoder for full DCC and sound control. Details Specific to R30403: Running number 2920 BR Black livery. Riveted Churchward Tender Later style curved frame chassis design. Fluted diecast piston rods. Tapered superheated boiler Later Chimney Design Later safety Valve with Top Feeds Common Saint Class Features Features: Diecast Chassis and Running Plate. Model Weight is 341 grams. High detail cab and fully decorated backhead with decorated instrument dials. Etched metal nameplates HM7000 21-Pin sound decoder compatible. HM7000 Power Bank compatible. Powerful 5 Pole Skew wound motor. Illuminated flickering firebox. Quick release locomotive to tender connector. Pogo pin wheel pickup arrangement for easy pickup servicing. Electrical pickups on main drive wheels and tender wheels. Diecast Piston Rods & valve gear. Fully decorated crew figures. Prototypical size metal handrails with brass stanchions. Brass main drive bearings. Sprung metal buffers. Front and Rear NEM coupling pocket. Separately fitted lamps. Lamp code can be changed. Separately fitted simulated coal load. - OO Scale

Hornby LNER Class A4 60016 'Silver King' BR (Early) Green (TT)

The LNER Gresley A4 is one of the most iconic express locomotives in Great Britain, with its streamlined casing a classic symbol of the attitude towards speed and design in the 1930s, which saw increased competition to the railways from road and air travel. The LNER Board knew that they had to make travel between the major cities faster, comfortable and more reliable. Nigel Gresley, the LNER's Chief Mechanical Officer, travelled on the Fliegende Hamburger diesel locomotive in Germany and was impressed by its streamlining, although he realized it was only efficient at high speeds. Gresley was certain that a modified A3 Pacific, with streamlining, could haul greater loads than other locomotives at the same speed or faster and a series of trials were conducted to confirm the A3's suitability. With the trials successfully completed, the LNER Board gave Gresley the go-ahead to create the "Silver Jubilee" streamlined trains, the first of the new streamlined A4s.The streamlining of the A4s' steam circuit, higher boiler pressure and extension of the firebox to create a combustion chamber made them more efficient than the A3 as they consumed less coal and water- especially later on when they were also fitted with a Kylchap double chimney. This improved their free steaming capabilities further. Their streamlined design not only made them capable of high speeds, but created an up draught of smoke, obscuring the driver's vision, a major problem on the new Class A4 engines. The story goes that during wind tunnel testing, after several unsuccessful efforts to get the smoke to lift clear, a thumbprint was inadvertently left on the clay model just behind the chimney. This succeeded in clearing the smoke and was incorporated into the final design. 2511 Silver King was the 3rd A4 locomotive to be built, designed to pull the Silver Jubilee service. The locomotive entered service in November 1935 in the unique LNER Silver livery designed for the service. The locomotive would go on to work under BR before being scrapped in 1965, making it one of the longest serving A4 locomotives. - NEXT 18 DCC Decoder Socket - TT:120 Scale

Hornby LNER Class A3 60078 'Night Hawk' BR (Early) Green (TT)

While the A1 was a fantastic locomotive that served its purpose as intended, it became clear reasonably quickly that some modifications could be made that would greatly improve its performance. These modifications however were too significant to avoid reclassifying the locomotives and as such the A1 Felstead 2743 was the first to be withdrawn from service only a handful of years after it was introduced, emerging from its shed in August 1928 as the first A3 ‘Super Pacific.’ The newly designated A3 locomotives had an improved boiler, larger cylinders and a conversion from right to left hand drive. 27 of the class were built as A3 locomotives from the get go, with all of the in service A1 examples being converted before 1950, the last such example to undergo this transformation was the then BR numbered 60068 Sir Visto. Night Hawk first entered LNER service on the fairly pleasing 24th October 1924 as locomotive number 2577 as an A1 locomotive. Rebuilt in January 1944 to an A3, the locomotive would go in to be numbered 78, and then 60078 under BR. Night Hawk would go on to be withdrawn on the 22nd October 1962, almost making it a nice round 38 years in service, before being scrapped at Doncaster in 1963. - NEXT 18 DCC Decoder Socket - TT:120 Scale

Hornby HM7000 Enhanced Bass Speaker

HM7000 Enhanced Bass Speaker Take your DCC sound to the next level with the Hornby HM7000 Enhanced Bass Speaker. Specially designed to deliver deeper, richer bass tones, this compact yet powerful speaker brings a new dimension of realism to your locomotives.

Hornby LNER Azuma Class 801/2 801207 'Darlington' Train Pack (Rail200)

LNER Azuma Class 801/2 801207 'Darlington' Train Pack (Rail200) The ‘Azuma’ Class 801/1 and 801/2 sets, were introduced on the East Coast Main Line between 2017 and 2020. They are a development of the Class 800 bi-mode trains in the Hitachi AT300 product range, produced at their Newton Aycliffe facility in the north-east, but unlike their bi-mode counterparts, the Class 801s are the purely electric version of the ‘Azuma’, although they are fitted with ‘emergency’ diesel engines to allow them to limp home in case of overhead power failure.  The Class 801/2s are the full nine-car length trains, whereas the 801/1s operate as shorter five-car sets, often used in pairs. The first of the full-length Class 801/2s ran in November 2019, entering service on front-line London King’s Cross-Edinburgh trains, allowing the bi-mode Class 800/1s to be cascaded onto King’s Cross-Aberdeen services, which in turn replaced the remaining InterCity 125 sets on that route. There are currently 30 Class 801/2 sets in operation. Five of which are named, including Set No. 801207, which on 14 January was unveiled by LNER to mark the 200th Anniversary year of the opening of the Stockton & Darlington Railway.  The power cars carry LNER, ‘Azuma’ and ‘Railway 200’ markings, with the legend ‘Darlington’ towards their front ends. The five-car pack includes powered PDTRBF (Pantograph Driving Trailer Restaurant Buffet First) and non-powered PDTS (Pantograph Driving Trailer Standard) cars, plus three matching coaches; two MS (Motor Standard) cars and a MF (Motor First) car. These can be made up to a full nine-car set by the addition of Coach Pack R40493. - 21 Pin DCC Decoder Socket - OO Scale

Hornby BR Class 50 50016 'Barham' BR Blue (TT)

BR Class 50 50016 'Barham' BR Blue 50016 ‘Barham’ entered service on the 27th April 1968. Built at the English Electric Vulcan Foundry and first allocated to LMR Western Lines under running number D416. This model represents 50016 in early 1980’s condition in its blue and yellow BR livery with small BR logos.  The model features a powerful 5-pole motor with dual bogie drive and a heavy diecast chassis for maximum traction. A HM7000-Next18 sound decoder can be fitted for control of the full lighting package and realistic class 50 sound effects using the free to download Class 50 sound profile. Specific to TT3041: Intermediate ‘domino’ marker lights. Early design roof with air intake. BR blue livery. Separate ‘Barham’ metal name plates. Common TT Class 50 Features: High detail TT Scale model based on extensive research including 3D scanning and original works drawings. Heavy diecast chassis. Model Weight is 195 grams. Powerful 5 Pole Skew wound motor with dual flywheels. Dual bogie drive with a total of 12 driving wheels. Brass axle bearings. All wheel electrical pickup. Front and rear kinematic coupling arm system. Pre-fitted acoustic speaker chamber. Next-18 Decoder socket. Cab interior lighting (requires a DCC decoder to be fitted). Night/Day Headlights (requires a DCC decoder to be fitted). Separately controllable taillights (requires a DCC decoder to be fitted). Directional lighting. Diecast metal buffers. Separately applied metal steps, grills and handrails. Accessory bag contains optional fit snow ploughs, vacuum pipes and couplings. - TT:120 Scale

Hornby LNER Class A4 4498 'Sir Nigel Gresley' LNER Garter Blue (TT)

LNER Class A4 4498 'Sir Nigel Gresley' LNER Garter Blue Built at the Doncaster works in 1937, 4498 Sir Nigel Gresley entered service in October 1937 on the London and Northeast Railway.  This model represents the locomotive in 1930’s condition with full valances and in its classic Garter blue paint scheme. A HM7000-Next18 sound decoder can be fitted for digital control and realistic A4 Class sound effects using the free to download A4 sound profile. Specific to TT3043: A4 locomotive 4498 in Garter blue with ‘Sir Nigel Gresley’ Name plates. Single Chimney. Full valances. 1928 Corridor Tender. Common TT A4 Class Features: High detail TT Scale model based on extensive research including and original works drawings. Heavy diecast chassis. Model Weight is 150 grams. High precision coreless motor. Brass axle bearings. Locomotive and Tender wheel electrical pickups. Kinematic rear coupling system. Pre-fitted acoustic speaker chamber and Sugarcube speaker. Next-18 Decoder socket. Metal buffers. Separately fitted brass safety valves and whistle. Separately fitted metal handrails. Accessory bag contains optional fit flanged trailing track wheelset, vacuum pipes and couplings. - TT:120 Scale

Hornby SR, Merchant Navy 21C1 'Channel Packet' (TXS Steam Generator)

SR, Merchant Navy 21C1 'Channel Packet' (TXS Steam Generator) Locomotive 21C1 'Channel Packet' was the first of the Merchant Navy class, entering service in 1941 at Salisbury and then Exmouth Junction from 1942. Renumbered '35001' under British Railways in 1948, 'Channel Packet' was allocated to Stewarts Lane from 1957 until rebuilding in 1959. This model features DCC sound and steam functionality to recreate the first of Bulleid’s powerful and iconic Merchant Navy locomotives.  Detail features:  High detail OO gauge model based on extensive research and original works drawings  High detail cab with fully decorated backhead and decorated instrument dials  Opening cab roof vent  Removable simulated coal load with fully detailed tender bunker Accurately modelled Merchant Navy Bullied-Firth-Brown wheels Early 21C1 'widows peak' front end streamlining and chimney arrangement 5000 gallon tender in its original condition with raves yet to be cut back Cast trailing truck Separately fitted nameplate, number plate and company ownership plate Horseshoe smokebox door company plate  Sprung metal buffers Heavy die-cast chassis, pony truck and trailing truck  Electronics & traction features:  Pre-fitted steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element)  Pre-fitted 21-pin HM7000 decoder and speaker. The decoder is compatible with NMRA DCC controllers and HM7000 app control  Pre-installed Merchant Navy sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect Adjustable steam output settings via the decoder  Water reservoir for up to 20 minutes of continuous steam running Die-cast connecting rods and valve gear  Powerful 5-pole skew-wound motor  Flywheel with cardan shaft arrangement for smooth running  Oilite main drive bearings  Wheel pickups on tender & driven locomotive wheelsets  Pogo pin wheel pickup arrangement for easy pickup servicing  8-way locomotive to tender drawbar, with integrated electrical connection for easy coupling and decoupling Front and rear NEM coupling pockets, with narrow tension lock couplings  Optional fit rear flanged wheelset (only recommended for larger layouts with sweeping curves or display purposes)  Please note: This model requires a DCC controller or the HM7000 app to control.  - OO Scale

Hornby Class 66 66725 'Sunderland' GBRf First Barbie (TT)

Class 66 66725 'Sunderland' GBRf First Barbie The Hornby TT:120 GBRf Class 66 Co-Co 66725 ‘Sunderland’ is a richly detailed model, representing one of the UK’s most reliable and versatile freight locomotives, the Class 66. Finished in GBRf’s striking blue and orange livery, this locomotive proudly carries the name of the city of Sunderland (with included etched nameplates), reflecting the operator’s strong regional connections.  This model is DCC-ready, featuring an 18-pin socket for straightforward digital conversion. A powerful 5-pole skew wound motor, directional and interior lighting (including working headlamps), NEM couplings and metal buffers enhance the authenticity of your model railway The Class 66 is a true workhorse of the modern railway, making it well-suited to a range of freight duties. This locomotive pairs perfectly with intermodal container wagons such as KFA, as well as IFA & MGR wagons.  - DCC Ready NEXT-18 Decoder Socket - TT:120 Scale

Hornby BR Class 08 08817 'Thornaby' BR Blue (TT)

BR Class 08 08817 'Thornaby' BR Blue Introducing the Hornby TT:120 BR Class 08 0-6-0 Diesel Shunter, running number 08817. This finely detailed model finished in striking BR Blue is a faithful representation of the locomotive as it appeared during Era 8 and features a DCC Ready 6 pin socket for seamless digital conversion. To create an authentic Era 8 setting, pair the Class 08 with a selection of suitable rolling stock from our HAA Hoppers to reflect the locomotive’s continued use in industrial freight operations to a brake van which was frequently coupled with shunting locomotives during yard movements. - DCC Ready 6-Pin Decoder Socket - TT:120 Scale

Hornby BR Class 37 37704 EWS (TT)

EWS Class 37 No.37704 - DCC Ready NEXT-18 Decoder Socket - TT:120 Scale

Hornby BR Class 43 HST GNER Train Pack (TT)

BR Class 43 HST GNER Train Pack 43120 & 43115 A symbol of British high-speed rail travel, the Class 43 HST is among Hornby’s latest TT:120 releases, bringing this iconic train to life in exquisite detail. This newly tooled train pack contains motorised power car (43120) and unmotorised power car (43115) in the striking blue livery of Great North Eastern Railway.  Equipped with a precision 5-pole skew wound motor as well as being DCC-ready with an 18-pin socket to ensure effortless digital integration. This train pack also features NEM tension lock couplings, directional lighting, and interior lighting within the passenger compartments to offer a further layer of realism. Pair the GNER Class 43 HST Train Pack with GNER HST Mk3 coaches for a realistic high-speed setup. Includes: 1x Powered BR Class 43 43120 'National Galleries of Scotland' 1x Dummy BR Class 43 43115 'Aberdeenshire' - DCC Ready NEXT-18 Decoder Socket - TT:120 Scale

Hornby BR Class 43 HST Virgin Trains Train Pack (TT)

BR Class 43 HST Virgin Trains Train Pack 43093 ‘Lady in Red’ & 43097 Bringing the speed and style of the late 1990s to TT:120 scale, the Virgin Trains Class 43 HST Train Pack, contains a motorised and unmotorised power cars numbered 43093 ‘Lady in Red’ and 43097 in their bold red and white livery. This newly tooled model captures the sleek, aerodynamic design of the HST, complete with accurately reproduced branding and detailing.  A powerful 5-pole skew wound motor delivers smooth and reliable performance, while directional lighting, brings an extra touch of realism. Interior lighting highlights the detail inside, creating an immersive experience whether running at full speed or waiting at the platform, with an 18-pin DCC Ready socket and NEM tension lock couplings to ensure easy connection with additional rolling stock.  Pair the Virgin Class 43 HST Train Pack with Virgin HST Mk3 coaches for a realistic high-speed setup. Includes: 1x Powered BR Class 43 43093 'Lady in Red' 1x Dummy BR Class 43 43097 - DCC Ready NEXT-18 Decoder Socket - TT:120 Scale

Hornby A1X Terrier 40 'Brighton' LB&SCR (TT)

A1X Terrier 40 'Brighton' LB&SCR Hornby proudly presents the TT:120 scale LB&SCR ‘Terrier’ 0-6-0T No. 40 ‘Brighton’. A beautifully detailed representation with all-new tooling, this finely crafted model perfectly captures the character of the original locomotive, resplendent in its striking yellow Stroudley ‘Improved Engine Green’ livery. Designed for smooth and reliable performance, the model features a coreless motor housed within a robust diecast body, ensuring excellent running characteristics and realistic weight distribution. The locomotive is DCC Ready with a 6-pin socket, allowing for straightforward digital conversion, while NEM tension lock couplings provide seamless compatibility with rolling stock. Perfect for enthusiasts and collectors alike, the TT:120 LB&SCR ‘Terrier’ No. 40 ‘Brighton’ embodies the charm and elegance of Victorian railway engineering. Pair with our exciting range of new TT:120 4-wheel coaches for historic authenticity. - DCC Ready 6-Pin Decoder Socket - TT:120 Scale

Hornby LMS Princess Coronation 6233 'Duchess of Sutherland' (TT)

LMS Princess Coronation 6233 'Duchess of Sutherland' Experience the grandeur of British steam heritage with the Hornby TT:120 LMS ‘Princess Coronation’ Class ‘Pacific’ 6233 ‘Duchess of Sutherland’. Designed by the legendary Sir William Stanier, this iconic 4-6-2 locomotive has been faithfully recreated in Era 3 livery and features a 5-pole skew-wound motor & NEM coupling system.  Metal buffers complete the premium finish while its DCC Ready 18-pin socket makes digital conversion effortless. Enhance your Duchess of Sutherland locomotive with a selection of Hornby’s meticulously crafted LMS coaches. - DCC Ready NEXT-18 Decoder Socket - TT:120 Scale

Hornby A1X Terrier 32655 BR Lined Black (Early Emblem) (TT)

A1X Terrier 32655 BR Lined Black (Early Emblem) Hornby’s newly tooled TT:120 BR ‘Terrier’ 0-6-0T 32655 captures the charm and history of this enduring class. Finished in the British Railways lined black livery with late crest, this model reflects the locomotive’s later years in service, offering a striking addition to any Era 4 layout. This highly detailed locomotive features a precision-engineered coreless motor, delivering smooth and consistent performance.  The diecast body enhances both durability and realism, while NEM tension lock couplings ensure effortless integration with rolling stock. Equipped with a 6-pin DCC Ready socket, the model offers seamless digital conversion for enhanced control and operation.  With its intricate lining, finely rendered details, and historically accurate livery, the BR ‘Terrier’ 0-6-0T 32655 captures the essence of a classic locomotive in its later years. Pair with our exciting range of new TT:120 4-wheel coaches for historic authenticity. - DCC Ready 6-Pin Decoder Socket - TT:120 Scale

Hornby BR Class 50 50049 'Defiance' GBRf (TT)

GBRf Class 50 'Defiance' 50049 - DCC Ready NEXT18-Pin Socket - Era 11  - TT:120 Scale

Hornby SR, Merchant Navy 21C9 'Shaw Savill' (VE Day 80th)

SR, Merchant Navy 21C9 'Shaw Savill' (VE Day 80th Anniversary) Hornby’s SR Merchant Navy Class 21C9 ‘Shaw Savill’, finished in black wartime livery, is an exceptional addition to the Victory over Europe 80th Anniversary Collection. This powerful locomotive 00 model, with its sleek lines and impressive design, is DCC-ready, equipped with a 21-pin socket to easily accommodate digital control. With its distinctive style and historical significance, ‘Shaw Savill’ is a must-have for collectors and enthusiasts looking to bring a piece of wartime rail history to their layouts. - DCC Ready 21-Pin Socket - OO Scale

Hornby LNER A3, 4472 'Flying Scotsman' (VE Day 80th)

LNER A3, 4472 'Flying Scotsman' (VE Day 80th Anniversary) Renowned the world over, the LNER Class A3 4472 ‘Flying Scotsman’ takes centre stage in Hornby’s Victory over Europe 80th Anniversary Collection, finished in its iconic wartime black livery, this 00 gauge model is DCC-ready with a 21-pin socket, allowing for seamless integration with modern digital control systems. This model features a die-cast running plate and flickering firebox, adding extra realism to any layout. - DCC Ready 21-Pin Socket - OO Scale

Hornby Dublo: LNER A4, 2511 'Silver King' (Silver Jubilee Collection)

Dublo: LNER A4, 2511 'Silver King' (Silver Jubilee Collection) A striking member of Sir Nigel Gresley’s legendary A4 Pacific fleet, the Hornby Dublo LNER ‘A4’ Class 2511 ‘Silver King’ brings streamlined power and timeless elegance to the 90th Anniversary Collection.  Expertly crafted this model has a flickering firebox and is DCC Ready with a 21-pin socket, allowing for easy digital conversion. The body and chassis is manufactured from die-cast metal for maximum traction and has a 5 pole motor to power this impressive express locomotive enabling it to haul any rake of coaches at impressive speeds. With its distinctive silver livery and powerful presence, ‘Silver King’ is a fitting tribute to one of the most celebrated locomotives of the LNER’s streamlined fleet. - DCC Ready 21-Pin Socket - Fully Diecast Body - OO Scale

Hornby Dublo: LNER A4, 2510 'Quicksilver' (Silver Jubilee Collection)

Dublo: LNER A4, 2510 'Quicksilver' (Silver Jubilee Collection) Celebrating 90 years of style, speed and steam power, the Hornby Dublo LNER ‘A4’ Class 4-6-2 2510 ‘Quicksilver’ proudly joins the 90th Anniversary Collection. Finished in a striking silver livery, this model perfectly captures the distinctive lines and powerful presence of the original locomotive. ‘Quicksilver’ has a flickering firebox and is DCC Ready with a 21-pin socket for simple digital conversion.  Fitted with a 5 pole skew wound motor this model will not be short of pulling power, while the included accessories pack offers added detail and crew figures. A true classic of British steam, brought to life with all the quality and craftsmanship of Hornby Dublo. - DCC Ready 21-Pin Socket - Fully Diecast Body - OO Scale

Hornby Ruston & Hornsby, 88DS, WM JEA No.1

Ruston & Hornsby, 88DS, WM JEA No.1 Ruston & Hornsby Works No. 262997 was supplied new to the West Midlands Joint Electricity Authority in January 1949 for its Birchills Power Station in Walsall. From September the same year, it moved to the newly-opened Walsall ‘B’ Power Station and, even after nationalisation of the industry in 1948 as the CEGB, continued to carry its WMJEA identity. - DCC Ready 6-Pin Socket - OO Scale

Hornby RailRoad: BR Class 08, 08512 EWS (Sound Fitted)

RailRoad: Class 08, 08512 EWS (Sound Fitted) This RailRoad Class 08 Shunter is the ideal model for arranging wagons in a goods yard and is suitable for model railway layouts large or small. It comes DCC-ready with a Next 18-pin plug, so you can upgrade it to run on DCC or with our HM7000 Bluetooth-controlled system, which also includes sound via a speaker inside the locomotive. The Class 08 350hp diesel electric shunter was the standard BR general-purpose shunting locomotive with 996 examples built between 1952 and 1962. They could be found shunting large marshalling yards and smaller goods depots. With the decline in the handling of individual goods wagons and the need to assemble trains, by 2000 there were just 100 left in service, with large numbers either scrapped, exported or sold into industrial use. Many of these useful locomotives found their way into the fleets of freight operating companies and 08512 is depicted as a typical EWS fleet member in the company’s eye-catching red and gold colour scheme. - DCC Sound Fitted (HM7000 Decoder) - OO Scale

Hornby RailRoad: BR Class 55, 55002 'KOYLI' BR Green (Sound Fitted)

RailRoad: BR Class 55, 55002 'KOYLI' BR Green (Sound Fitted) This RailRoad Class 55 ‘Deltic’ diesel was built for high-speed express trains making it the perfect diesel for pulling a rake of coaches. It comes DCC-ready with a Next 18-pin plug, meaning it can be upgraded to run on DCC and with our HM7000 Bluetooth-controlled system, which also includes sound via a speaker inside the locomotive. The production ‘Deltics’ were a powerful Type 5 locomotive, designed for high-speed express passenger services on the East Coast Main Line. When introduced in 1961, these were the most powerful diesel locomotives in the world. Powered by two big Napier diesel engines, these locomotives – later known as Class 55s – were capable of speeds of up to 117mph (188km/h) and all were given names in the best tradition of East Coast express locomotives. Known affectionately as ‘KOYLI’ by enthusiasts, 55002 is finished in a two-tone green livery, reminiscent of the early 1960s, but with full yellow ends and the classic white cab window surrounds. - DCC Sound Fitted (HM7000 Decoder) - OO Scale

Hornby RailRoad: Shepway Steelworks, Class B4, No. 9

RailRoad: Shepway Steelworks, Class B4, No. 9 This RailRoad B4 Class steam shunter is the ideal little tank engine for a model railway layout. Whether running a short train around a layout or shunting wagons in a goods yard, it is the perfect little steam engine for getting things moved! This RailRoad model is a good example of a privately owned steam shunter that could have been seen working in an industrial setting. The B4 Class were first introduced in the 1890’s with their original purpose being for station piloting and shunting freight wagons in docks. They were designed by London and South Western Railway (LSWR). The close wheel configuration made them ideal for shunting around tight radius curves that were common in docks and works yards with limited space. Two examples of these fine locomotives are still preserved today. - This Model is NOT DCC Ready - OO Scale

Hornby RailRoad: Southern Rail, Class B4, No.96 'Normandy'

RailRoad: Southern Rail, Class B4, No.96 'Normandy' This RailRoad B4 Class steam shunter is the ideal little tank engine for a model railway layout. Whether running a short train around a layout or shunting wagons in a goods yard, it is the perfect little steam engine for getting things moved! The B4 Class were first introduced in the 1890’s with their original purpose being for station piloting and shunting freight wagons in docks. They were designed by London and South Western Railway (LSWR). The close wheel configuration made them ideal for shunting around tight radius curves that were common in docks and works yards with limited space. Two examples of these fine locomotives are still preserved today, including the one we've replicated here, ‘Normandy’, which still serves at the Bluebell Preserved Railway in the South East. - This Model is NOT DCC Ready - OO Scale

Hornby RailRoad: BR, B17 Class, 61652 'Darlington' BR Green (Late)

RailRoad: BR, B17 Class, 61652 'Darlington' BR Green (Late) The ‘B17’ Class was also known as either the ‘Sandringham’ Class or the ‘Footballer’ Class, depending on which name it carried. Designed by Nigel Gresley for passenger services on the Great Eastern Main Line, 73 were built between 1928 and 1937, 52 of them at the LNER’s Darlington Works and the remainder supplied by private builders North British in Glasgow and Robert Stephenson & Co. in Newcastle. Built as No. 2852 in 1936, it became 61652 under BR and is one of the ‘Footballers’, carrying the crest of Darlington Football Club and a football beneath its nameplate. It is finished in BR Green with the late crest on the tender. - DCC Ready 21-Pin Socket - OO Scale

Hornby GWR, Castle Class, 5081 'Lockheed Hudson' GW Green

GWR, Castle Class, 5081 'Lockheed Hudson' GW Green Designed as front-line express passenger locomotives, the GWR ‘4073’ Class ‘Castles’ were built over a long period. The first of 155 new locomotives entered traffic in August 1923, while the last was finished at Swindon in August 1950 under British Railways. Sixteen further locomotives – 15 ‘Stars’ and one-off ‘Pacific’ No. 111 Great Bear – were also rebuilt as ‘Castles’, making 171 in total. No. 5081 was built in 1939 and originally named ‘Penrice Castle’ but was renamed ‘Lockheed Hudson’ in 1941. It was withdrawn from Cardiff East Dock in October 1963. - DCC Ready 21-Pin Socket - OO Scale

Hornby BR, Mk4 DVT '82218' Intercity Swallow

BR, Mk4 DVT '82218' Intercity Swallow This BR Driving Van Trailer comes with directional lighting, extra detail accessories and a 21-pin decoder socket, allowing you to fit an HM7000 decoder and speaker, giving it sound options. This DVT is compatible with BR Intercity Mk4 coaches and a BR Intercity Class 91 locomotive. The BR InterCity Mk4 DVT was designed to work with Mk4 carriages on the East Coast Main Line as a driver control car working in push-pull mode with Class 91 electric locomotives on InterCity 225 trains. Introduced in 1990, the DVT would normally be marshalled at the south end of the train, adjacent to the First Class carriages. The model is finished in the classic 1990s InterCity ‘Swallow’ livery of white with a dark grey mid-section and a lower red band, with full yellow ends. DVT 82218 still exists as a barrier/translator vehicle owned by the Harry Needle Railroad Company. - DCC Ready 21-Pin Socket - OO Scale

Hornby BR, MK4 DVT '82202' GNER

BR, MK4 DVT '82202' GNER This GNER Driving Van Trailer comes with directional lighting, extra detail accessories and a 21-pin decoder socket so you can fit an HM7000 decoder and speaker, giving it sound options. This DVT is compatible with GNER Mk4 coaches and a GNER Class 91 locomotive. Following privatisation of Britain’s railways in 1996, the first franchise holder on the East Coast Main Line was GNER – Great North Eastern Railway – which operated the route until December 2007. Trains were normally formed of a Class 91 electric locomotive, nine Mk4 carriages and a DVT (Driving Van Trailer). The DVT design was based on the Class 91 locomotive and boasted a full-width cab and a luggage compartment with space for bicycles and a train manager’s office. Finished in the stylish GNER livery, 82202 no longer exists, having been scrapped once superseded by modern Hitachi ‘Azumas’. - DCC Ready 21-Pin Socket - OO Scale

Hornby RailRoad: LNER, Class 800, 800201 Train Pack

RailRoad: LNER, Class 800, 800201 Train Pack This Class 800 Train Pack in the famous London North Eastern Railway (LNER) livery consists of a drive and dummy car both with directional lighting. This makes the perfect modern-image passenger train and can be extended with the extra Class 800 coaches that are also available. - 21-pin DCC Socket - OO Scale

Hornby RailRoad Plus: BR Class 58 58020 RailFreight 'Doncaster Works'

RailRoad Plus: BR Class 58 58020 RailFreight 'Doncaster Works' This RailRoad Class 58 is a wonderful freight locomotive to add to your layout, carrying a BR grey paint scheme with a large BR logo on its side. This model comes with a socket for an 8-pin decoder, so you can upgrade it to run on DCC or with our HM7000 Bluetooth-controlled system, which also includes sound via a speaker inside the locomotive. First delivered in 1983 the BR Class 58 was designed and built for heavy freight. Its narrow body with a cab at each end earned it the nickname of ‘bone’ in the railway community. Fifty of the class were built and lasted for around two decades until finally being withdrawn in 2002 with the introduction of the Class 66’s. Most of the class were sadly scrapped but there is one example still operational and a number of them in storage or under restoration. - DCC Ready 8-Pin Socket - OO Scale

Hornby RailRoad Plus: BR Class 58 58046 Mainline Blue 'Asfordby Mine'

RailRoad Plus: BR Class 58 58046 Mainline Blue 'Asfordby Mine' This RailRoad Class 58 comes in a striking blue BR Mainline paint scheme and would look perfect pulling freight on a model railway layout This model comes with a socket for an 8-Pin decoder meaning it can be upgraded to run on DCC and with our HM7000 Bluetooth controlled system, which also includes sound via a speaker inside the locomotive. First delivered in 1983 the BR Class 58 was designed and built for heavy freight. Its design of having a narrower body and a cab at each end earnt it the nickname of ‘bone’ in the railway community. In total, fifty of the class were built and lasted for around two decades until finally being withdrawn in 2002 with the introduction of the Class 66’s. Most of the class were sadly scrapped but there is one example still operational and a number of them either being stored or under restoration. - DCC Ready 8-Pin Socket - OO Scale

Hornby RailRoad Plus: Class 66 66711 Aggregates 'Sence' (Sound Fitted)

RailRoad Plus: Class 66 66711 Aggregates 'Sence' (Sound Fitted) This RailRoad Class 66 diesel was built for freight trains and operates across the UK making it the perfect locomotive for your model freight train. It is compatible with many wagons from Hornby. It comes DCC-ready with a 21-pin plug, meaning it can be upgraded to run on DCC or with our HM7000 Bluetooth-controlled system, which also includes sound via a speaker inside the locomotive. This GBRf-owned locomotive is finished in the attractive turquoise, blue and silver colours of Aggregate Industries, at whose quarry at Bardon Hill it was named ‘Sence’ in July 2015. The name refers to the River Sence which has its source just north of the quarry. - DCC Sound Fitted (HM7000 Decoder) - OO Scale

Hornby RailRoad Plus: Class 66 66711 Aggregates Industries 'Sence'

RailRoad Plus: Class 66 66711 Aggregates Industries 'Sence' This RailRoad Class 66 diesel was built for freight trains and operates across the UK making it the perfect locomotive for your model freight train. It is compatible with many wagons from Hornby. It comes DCC-ready with a 21-pin plug, meaning it can be upgraded to run on DCC or with our HM7000 Bluetooth-controlled system, which also includes sound via a speaker inside the locomotive. This GBRf-owned locomotive is finished in the attractive turquoise, blue and silver colours of Aggregate Industries, at whose quarry at Bardon Hill it was named ‘Sence’ in July 2015. The name refers to the River Sence which has its source just north of the quarry. - DCC Ready 21-Pin Socket - OO Scale

Hornby RailRoad Plus: Class 66 66723 GBRf 'Chinook'

RailRoad Plus: Class 66 66723 GBRf 'Chinook' This RailRoad Class 66 diesel was built for freight trains and operates across the UK making it the perfect locomotive for your model freight train. It is compatible with many wagons from Hornby. It comes fitted with a 21-pin plug, meaning it can be run on DCC and with our HM7000 Bluetooth-controlled system, which also includes sound via a speaker inside the locomotive. The Class 66 is a heavy-freight diesel-electric locomotive, a development of the earlier Class 59 which was a great success in the UK with Foster Yeoman. Like its predecessor, EMD Co-Cos have all been built in North America, with 480 supplied to UK operators between 1998 and 2008 and 2014 and 2015. Many more were bought secondhand from mainland European operators, so it is no surprise that these machines handle the lion’s share of freight traffic in the UK today. Despite being called ‘sheds’ by enthusiasts because of their shape, they have carried many colourful and innovative liveries.No. 66723 ‘Chinook’ is in GBRf blue and orange livery, and is named in honour of the RAF’s 7, 18 and 27 Squadrons based at Odiham in Hampshire. This is also the home of the CH-47 Chinook heavy lift helicopter, one of which adorns each side of the locomotive’s body. - DCC Ready 21-Pin Socket - OO Scale

Hornby RailRoad Plus: Class 73 73128 GBRf NSE (Sound Fitted)

RailRoad Plus: Class 73 73128 GBRf NSE (Sound Fitted) This RailRoad Class 73 diesel has been used for both passenger and freight trains over the years, so it is suited to many model railway layouts. It comes fitted with a 21-pin plug, so you can run it on DCC or with our HM7000 Bluetooth-controlled system, which also includes sound via a speaker inside the locomotive.Introduced by BR in 1963, what is now known as the Class 73 is an electro-diesel locomotive, which are also referred to as EDs. As well as operating on the Southern Region’s 650-750v DC third-rail network, these locomotives have a 600hp diesel engine, allowing them to work over non-electrified routes and into sidings and yards where there isn’t a third rail power source. From new, all 49 locomotives were fitted for push-pull working with Southern Region multiple units. No. 73128 is owned by GBRf and has been painted in the attractive red, white and blue retro livery of former BR sector Network SouthEast and was named ‘Kent & East Sussex Railway’ at Robertsbridge in honour of the heritage line’s 50th anniversary in June 2024. - DCC Sound Fitted (HM7000 Decoder) - OO Scale

Hornby BR, Class 423 '4 VEP' 7712 BR Blue Train Pack

BR, Class 423 '4 VEP' 7712 BR Blue Train Pack The 4-VEP Electric Multiple Units were built for outer suburban services in South London and on rural services in Kent, Sussex and Hampshire. First introduced in 1967, the units were mainly built by BR at York, although some of the early vehicles were produced at BR’s Derby Works. Originally numbered 7701-7894, 194 standard four-car sets entered service and were subsequently renumbered into the 30XX and 31XX series in the 1980s to make them TOPS-compliant. Fitted with manual ‘slam doors’ next to every seating row, they were the last rolling stock built to this pattern for BR, the last units being withdrawn in 2005 after a working life of 38 years. - DCC Ready 21-Pin Socket - OO Scale

Hornby Birth of the Railways Train Pack (Railway 200)

Birth of the Railways Train Pack (Railway 200) Representing the formative years of steam-powered railways, these three locomotives were built between 1825 and 1838. The first is ‘Locomotion No. 1’, designed by George and Robert Stephenson. It was built at their factory in Newcastle for the opening of the Stockton & Darlington Railway, where it became the first steam locomotive to pull a passenger train on a public railway. In doing so, it became the first steam locomotive to both operate and haul a passenger-carrying train on a public railway in September 1825. 2025 marks the 200th anniversary. With the experience they gained, Robert Stephenson & Co. entered a design for the 1829 Rainhill Trials, held to find suitable motive power for the Liverpool & Manchester Railway. Their entry, ‘Rocket’, was the clear winner and formed the basis for future steam locomotive design on the L&MR, which opened the following year. By 1838, locomotive design had already moved on, and 0-4-2 No. 57 ‘Lion’, was one of a pair of ‘luggage’ locomotives built to a Stephenson patent by Todd, Kitson & Laird of Leeds, also for the L&MR. Please note: Locomotion No.1 comes fitted with a Next 18-pin socket, but due to the locomotive's size limitations, sadly it cannot take an HM7000 Next 18-pin decoder. The 'Rocket' locomotive comes fitted with a 6-pin socket. The 'Lion' locomotive comes fitted with a Next 18 socket (NEM 662). - OO Scale

Hornby LNER Class 91/1 91130 ' Lord Mayor of Newcastle'

LNER Class 91 ' Lord Mayor of Newcastle' 91130 Entering service as 91030 in January 1991, this locomotive was originally named ‘Palace of Holyrood House’. It lost its name following privatisation of BR in 1997, when it was put into GNER colours, but in September 2001, it was named ‘City of Newcastle’ and renumbered 91130 following refurbishment by Adtranz. By 2004, the name had been removed. Under Virgin Trains East Coast, it was named ‘Lord Mayor of Newcastle’ from December 2016. A new livery of LNER red and white was applied when the franchise changed hands in 2018 and the name was retained. The locomotive is still in operational condition. - DCC Ready 21-Pin Socket - Era 11 - OO scale

Hornby BR Intercity Class 91/0 91031 'Sir Henry Royce'

BR Intercity Class 91 'Sir Henry Royce' 91031 A total of 31 Class 91s were built between 1988 and 1991 for high-speed express passenger train haulage as part of the East Coast electrification programme of the late 1980s. Also known as InterCity 225s in anticipation of their service speed of 225km/h (140mph), they were also referred to as ‘Electras’ by BR during their development phase.No. 93031 was the last locomotive to be built at Crewe Works and, as a result, earned its place in preservation and is currently on display at the Museum of Scottish Railways. - DCC Ready 21-Pin Socket - Era 8 - OO Scale

Hornby Southern Rail, Class T9 302

Southern Rail, T9 302 This locomotive was completed at the London & South Western Railway’s Nine Elms Works in late December 1900. Of the 66 built, 35 of the T9 Class were completed at Nine Elms, with a further 31 examples built by Dübs & Co at Polmadie in Glasgow. Nicknamed ‘Greyhounds’ as they consistently ran at speeds of up to 85mph, the last in service was No. 30120, which is preserved as part of the National Collection. Originally paired with a conventional six-wheel tender, it received an eight-wheel watercart version in July 1935. Renumbered 30302 after Nationalisation in 1948, it was withdrawn in September 1952. - DCC Ready 21 Pin Socket - OO scale

Hornby Manchester Ship Canal, Peckett W4 Class, 0-4-0ST ‘Jaffa’

Manchester Ship Canal, Peckett W4 Class, 0-4-0ST ‘Jaffa’ Built in 1901, Peckett Works No. 852 worked at the Madeley Coal, Coke and Brick Co. Ltd at Leycett, near Newcastle-under-Lyme in Staffordshire. This later became part of Madeley Collieries Ltd, where the locomotive was used for shunting coal wagons. - DCC Ready 4 Pin Socket - OO scale

Hornby LNER, Streamlined B17, 'City of London' 2870

LNER Streamlined B17 City of London 2870 Gresley developed a three-cylinder 4-6-0 to cope with increased loadings on the LNER’s East Anglian passenger services in the shape of the B17 Class, as he could not use his famous ‘Pacifics’ due to weight constraints. Two of the class were given A4-style streamlining in September 1937 for publicity purposes, including No. 2870 Tottenham Hotspur, which was then renamed City of London. They were designated B17/5s, but the streamlining was removed in April 1951. The locomotive, originally built by Robert Stephenson & Co in 1937, was withdrawn in April 1960. - DCC Ready 21 Pin Socket - OO scale

Hornby LMS, Stanier 5MT 'Black 5', 5047

LMS Stanier 5MT Black 5 5047 Known as ‘Black Fives’, or in Scotland as ‘Hikers’, Stanier’s 5MT 4-6-0s were one of the most numerous classes of locomotives built in the UK, with 842 examples built at a variety of locations, including the railway’s own works at Crewe, Derby and Horwich, plus private builders Vulcan Foundry and Armstrong Whitworth, the latter building by far the most with 327 machines. No. 5047 was built at Vulcan Foundry, Newton-le-Willows in 1935 with a domeless boiler and spent most of its career in Scotland. It was withdrawn from St. Margaret’s shed, Edinburgh in July 1966 as BR No. 45047. - DCC Ready 21 Pin Socket - OO scale

Hornby GWR, Saint Class, 'Lady of Legend' 2999

GWR Saint Class - Lady of Legend 2999 As none of the original ‘Saint’ Class survived into preservation, the last being withdrawn in 1953, the Great Western Society purchased GWR ‘Hall’ Class No. 4942 Maindy Hall from Barry scrapyard in 1974 with the intention of rebuilding it as a ‘Saint’. The ‘Hall’ was a direct development of the ‘Saint’, No. 2925 Saint Martin being used as its prototype in 1924 by Charles B. Collett, Churchward’s successor as Chief Mechanical Engineer at the GWR. Work on the conversion finally got underway in 1995 and, in April 2019, No. 2999 Lady of Legend made its first moves in steam at Didcot Railway Centre. - DCC Ready 21 Pin Socket - OO scale

Hornby GWR, Saint Class, 'Lord Palmer' 2975

GWR Saint Class - Lord Palmer 2975 Entering service in March 1905 as the unnamed No. 175, it was given the name Viscount Churchill in 1907 and numbered 2975 in December 1912. In February 1924, the locomotive was renamed Sir Ernest Palmer, but when Baronet Palmer gained peerage in June 1933, it was subsequently renamed Lord Palmer in the October. The locomotive was extensively damaged in an accident while hauling a goods train at Appleford in December 1942 and was finally withdrawn on 30th November 1944 from Bristol Bath Road shed after a creditable 39 years and nine months of service. - DCC Ready 21 Pin Socket - OO scale

Hornby Dublo: BR (Early) Princess Coronation Duchess of Buccleuch 46230

Dublo: BR (Early) Princess Coronation Duchess of Buccleuch 46230   Also known as the ‘Duchess’ Class, Stanier’s ‘Princess Coronations’ were among the biggest and most powerful express passenger locomotives in Britain.  Thirty-five were built at Crewe Works between 1937 and 1948, many having streamlined casing. Ten were set aside for hauling the prestigious ‘Coronation Scot’ between London Euston and Glasgow. No. 46230 wasn’t one of those, but it was the first of the third batch of locomotives, which consisted of five non-streamlined versions, and went new to Camden in June 1938 as LMS No. 6230.  At Nationalisation in 1948, the locomotive became BR No. 46230 and was painted in lined Brunswick green as depicted by the model. At the time, the locomotive was based at Polmadie shed in Glasgow, from where it was withdrawn in December 1963. - Diecast Body - DCC Ready 21 Pin Socket - OO scale

Hornby BR (Early), Class T9 30338

BR (Early), Class T9 30338 Designed for express passenger work on the London & South Western Railway, 66 of these elegant 4-4-0s were built between 1899 and 1901. Built at the LSWR’s Nine Elms Works, No. 30338 entered service in October 1901 as No. 338 and lasted in service until withdrawn by British Railways in April 1961, having completed a respectable 59 years and six months. This locomotive was the last of the class to be built at Nine Elms and had a wider cab and revised splashers compared to earlier class members. It was also paired from new with an eight-wheel water-cart tender. - DCC Ready 21 Pin Socket - OO scale

Hornby BR (Late) Thompson Class A2-3 'Watling Street' No 60521

BR Late Thompson Class A2-3 Watling Street No 60521 Of the 15 newly built A2s, only the first, No. 500, emerged from Doncaster under Edward Thompson while he was Chief Mechanical Engineer. That was in May 1946 and, by the end of the following month, Thompson had retired aged 65. The remaining 14 were built under his successor, Arthur Peppercorn, between July 1946 and September 1947. They had planned to build 25 in total, but Peppercorn cancelled the remainder while he made modifications to the design. His new design became the A2 and the Thompson locomotives were designated A2/3s. No. 60521 entered service as No. 521 ‘Watling Street’ at Gateshead in May 1947 and was withdrawn by BR at Tweedmouth in November 1962. - DCC Ready 21 Pin Socket - OO scale

Hornby BR (Early Emblem), Class 9F 92018

BR (Early Emblem), Class 9F 92018 A total of 251 of these heavy-duty freight locomotives were built by BR between January 1954 and March 1960, with construction shared between its Works at Crewe and Swindon who built 198 and 53 of them respectively. No. 92018 went new from Crewe to Wellingborough in October 1954 and was withdrawn from Carlisle Kingmoor in April 1967, after a wastefully short career of just 12 years and five months in service. It is paired with a BR1C type tender. - DCC Ready 21 Pin Socket - OO scale

Hornby LNER Azuma High Speed Train Set

LNER Azuma High Speed Train Set - 800201 The LNER Azuma train set is the perfect modern passenger train set, with the train itself a replica of the Class 800 train that was introduced to the East Coast mainline in 2019. These trains were designed and built using Japanese bullet train technology that offers a faster, smoother and quieter journey. The Class 800s are bi-mode powered, which means they run on electricity where the line is electrified or powered by a diesel engine where the line is not, making them versatile on the modern rail network. The train is made up of a drive unit at each end - one is the power car, motorised to power the train, and both have directional lighting. At the forward end, the lighting is white, and it is red at the rear. Finally, there's a passenger coach in the middle. It also comes with an oval of track with a siding, a buffer stop and a controller with a mains power supply. Includes: 1x Powered Driving End 1x Dummy Driving End 1x Passenger Coach (coach C catalogue number R40492) Oval of Track with a Siding Buffer Stop Controller Mains Power Supply - DCC Ready 21 Pin Socket - OO scale

Hornby BR High Speed Train Set - inspired by R685

BR High Speed Train Set - inspired by R685 Embark on a nostalgic journey back to the 1970s and 1980s era of Hornby train sets with this British Rail High-Speed train set. Replicating the retro look of the famous Hornby R.685 train set, but with today’s quality and detail, this train set is the perfect toy to rekindle amazing childhood memories that can be shared with future generations. The InterCity 125 High-Speed Trains were introduced by British Rail in 1976, operating 125mph services on the Great Western Main Line and the East Coast Main Line before being introduced to other lines as their use spread. Built at Crewe by BREL, the Class 43 are officially the fastest diesel trains in the world. This train set comes complete with a pair of Class 43 diesel driving cars; one powered and the other a non-powered driving car. Power driving car has directional lighting that illuminates white at the forward end and red at the rear.  This set Includes: 1x Class 43 Power Car 1x Class 43 Dummy Car 1x Mk3 passenger coach an oval of track with a siding a buffer stop controller with a mains power supply. - DCC Ready 21 Pin Socket - OO scale

Hornby Class 66 66850 'David Maidment OBE' Colas (TT) (Sound Fitted)

Class 66 66850 'David Maidment OBE' Colas (TT) (Sound Fitted) This model will feature directional and cab lighting. Night and day headlights will also be included. All the Class 66 models have 12 axles for the current pick-up and both bogies are motor-driven. - SOUND FITTED *Requires HM7000 APP or DCC controller to operate sounds and drive model. (Will not operate on analogue) - Era 11 - TT:120 Scale

Hornby LNER, J50 Class, 0-6-0T, 2793 (TT)

LNER, J50 Class, 0-6-0T, 2793 Includes: - LNER Black livery and represents the prototypical locomotive at the start of its working life. Featuring - All wheel pickups and an ABS cab area - Accessory bag - Tulig style couplings - 3 Pole Motor - 6 PIN DCC Socket - TT:120 Scale  

Hornby One:One Collection, Class 60 GWR 60081 'Isambard Kingdom Brunel'

One:One Collection, Class 60 GWR 60081 'Isambard Kingdom Brunel' Includes: - Detailed bodywork and cabs - Etch nameplates - Working directional lighting - Accessory bag includes buffer beam parts - Sprung metal buffers - DCC Ready 21-Pin Decoder Socket - Exclusive packaging as part of the One:One Collection - OO Scale

Hornby Class 60 60008 'Gypsum Queen II' Loadhaul - (DCC Sound Fitted)

Class 60 60008 'Gypsum Queen II' Loadhaul - (DCC Sound Fitted) Includes: - Detailed body and cabs - Etch Nameplates - Working directional lights - Metal sprung buffers - NEM couplings and pockets - 5 Pole Skew wound motor - Accessory bag includes buffer beam hoses and parts - DCC Sound Fitted HM7000 (NOTE: This model and sound functions can ONLY be operated with the HM7000 App via bluetooth or a DCC digital controller) - Model will traverse minimum of 2nd radius curves (R606/R607) - OO Scale

Hornby SR, 'H' Class 0-4-4T 1552 - Era 3

SR, 'H' Class 0-4-4T 1552 - Era 3 Includes: - Southern Railway unlined black livery - SR 'Sunshine' lettering style - Detailed body and cab interior - Sprung buffers - Accessory bag - NEM couplings and pockets - 5 pole Motor - 8 PIN DCC Socket NOTE: This model is compatible for the Hornby HM7000 TXS decoders. Requires Hornby HM7000 App or suitable DCC Digital controller to operate - Will traverse minimum of 2nd radius curves (R606/R607) - OO Scale

Hornby ROD, J36 Class 0-6-0 5662 - Era 2

ROD, J36 Class 0-6-0 5662 - Era 2 Includes: - Railway Operating Diversion Livery - WW1 Brown ochre livery - R.O.D lettering Branding on tender - Cab and tender detailing - Accessory Bag - DCC Ready Socket 8 Pin Socket (NOTE: This is compatible with Hornby HM7000TXS decoders but will require a digital controller or Hornby App to operate) - NEM couplings and pockets - Era 4 - OO Scale 

Hornby LNER, Thompson Class A2/3, 4-6-2, 511 'Airborne'

LNER, Thompson Class A2/3, 4-6-2, 511 'Airborne' Includes: - Highly detailed bodywork - LNER Doncaster / Apple lined Green Livery - Post War Plain Gill Sans numbers and Letter - Cab interior detailing - Accessory bag includes steam cocks and flanged wheelset - NEM Couplings and pockets - 5 Pole Motor - 8 PIN DCC ready socket NOTE: This is compatible with Hornby HM7000 TXS Sound Decoders. Will require the HM7000 App or suitable DCC controller to operate functions. - Will traverse minimum 2nd radius curves (R606 and R607) - Length: 295mm - OO scale

Hornby LNER, Class J52, 0-6-0ST 4225 - Era 3

LNER, Class J52, 0-6-0ST 4225 - Era 3 Includes: - Body and cab detailing - LNER plain black livery - Gill Sans Gold and red/black shadowed lettering/numbers - Sprung buffers - Accessory bag - NEM couplings and pockets - 5 pole skewed wound motor - 21 PIN DCC Ready socket NOTE: this model is compatible with the Hornby HM7000 TXS Decoders. This requires the Hornby HM7000 App or suitable DCC controller - Will traverse 2nd radius curves minimum (R606 /R607) - OO Scale

Hornby BR, Thompson Class A2/2, 4-6-2, 60502 'Earl Marischal'

BR, Thompson Class A2/2, 4-6-2, 60502 'Earl Marischal' Includes: - Highly detailed bodywork - British Railway express Green lined livery - BR late crest  - Accessory bag includes steam cocks and flanged wheelset - NEM Couplings and pockets - 8 PIN DCC ready socket NOTE: This is compatible with Hornby HM7000 TXS Sound Decoders. Will require the HM7000 App or suitable DCC controller to operate functions. - Will traverse minimum 2nd radius curves (R606 and R607) - OO scale

Hornby BR, Merchant Navy Class, 4-6-2, 35012 'United States Lines'

BR, Merchant Navy Class, 4-6-2, 35012 'United States Lines'  Includes: - SR 'Post War' Malachite lined Green Livery - British Railways style number font - Detailed body work - Fully detailed cab interior  - Accessory bag - 5 pole Motor and brass flywheel - NEM couplings and pockets - 21 PIN DCC Socket NOTE: this locomotive is suitable for Hornby HM7000 TXS decoders. Requires the Hornby HM7000 app or suitable DCC digital controller to operate. - Will traverse minimum 2nd radius (R606/ R607) - OO Scale 

Hornby BR, H Class 0-4-4T 31177 - Era 4

BR, H Class 0-4-4T 31177 - Era 4  Includes: - British Railways Lined Black livery - BR early crest - Detailed body and cab interior - Sprung buffers - Accessory bag - NEM couplings and pockets - 5 pole Motor - 8 PIN DCC Socket - Will traverse minimum of 2nd radius curves (R606/R607) - OO Scale

Hornby BR (Early), Class J52, 0-6-0ST 68873 - Era 4

BR (Early), Class J52, 0-6-0ST 68873 - Era 4 Includes: - Body and cab detailing - British Railways plain black livery - Sprung buffers - Accessory bag - NEM couplings and pockets - 5 pole skewed wound motor - 21 PIN DCC Ready socket NOTE: this model is compatible with the Hornby HM7000 TXS Decoders. This requires the Hornby HM7000 App or suitable DCC controller - Will traverse 2nd radius curves minimum (R606 /R607) - OO Scale

Hornby BR (Early), J50 Class, 0-6-0T, 68983 (TT)

BR (Early), J50 Class, 0-6-0T, 68983 - Era 4 Includes: - BR Black livery with a BR early crest emblazoned on the bodysides. - All wheel pickups and an ABS cab area - Accessory bag - Tulig style couplings - 3 Pole Motor - 6 PIN DCC Socket - TT:120 Scale

Hornby Dublo: BR, English Electric DP1, Co-Co, DP1 'Deltic'

Hornby Dublo: BR, English Electric DP1, Co-Co, DP1 'Deltic'  Includes: - Detailed diecast body - BR Prototype Blue and Cream livery - Cab interior detailing - Distinctive Nose chevrons and Headlight - Sprung buffers - 5 Pole Motor - NEM couplings and pockets - 21 PIN DCC Socket NOTE: This is compatible with the HM7000TXS decoder. This will require the Hornby HM7000 App or suitable Digital Controller to operate - Era 4 - Will traverse minimum of 2nd radius curves (R606, R607)  - OO Scale

Hornby BR M7 Class 0-4-4T 30244 - Era 3

BR M7 Class 0-4-4T 30244 - Era 3 Includes: - Rare Malachite Green Condition - British Railways 'Post War' Lined Malachite Green - Cab and body detailing - All wheel electrical pick up - 5 pole motor - 8 PIN DCC Ready socket - NEM couplings and pockets - Accessory bag - OO Scale

Hornby BR, Class 08, 0-6-0, 08570 - Era 7

BR, Class 08, 0-6-0, 08570 - Era 7 Includes: - BR Intercity livery - Accessory bag with hose pipe detail - Wooden panel effect on cab door - Cab detail - Sprung buffers - 8 PIN DCC Ready Socket - Era 7 - OO Scale

Hornby Class 66 66850 'David Maidment OBE' Colas Rail (TT)

Colas Rail, Class 66, Co-Co, 66850, 'David Maidment OBE' This model will feature directional and cab lighting. Night and day headlights will also be included. All the Class 66 models have 12 axles for the current pick-up and both bogies are motor-driven. - DCC Ready NEXT18 Socket - Era 11 - TT:120 Scale

Hornby GBRf Class 67 Bo-Bo 67027 - Era 11

GBRf, Class 67, Bo-Bo, 67027 The Class 67s were constructed by Alstom Meinfesa in Valencia between 1999 and 2000 for EWS. No. 67027 ‘Charlotte’ was named ‘Rising Star’ in 2003. Various changes took place over the years. In 2007, the ownership of the locomotive was transferred to DB Cargo UK. In 2014, the locomotive adopted the DB Cargo UK red livery, changing from the previous EWS red & yellow livery.  Ownership was again transferred to Colas Rail in 2017. To reflect this, the livery was amended to Colas Rail yellow, orange and black at the Toton TMD. The locomotive name changed to ‘Charlotte’ in the same year. In 2022, ownership was transferred to GB Railfreight and repainted in a blue and yellow livery, although this didn't last long as GBRF Rejected the 2 Class 67s and they were returned back to Colas. The model is painted in an iconic GBRf blue and orange livery. This model is DCC-ready and compatible with our HM7000 21-Pin decoder. - DCC Ready 21-Pin Decoder Socket - Era 11 - OO scale

Hornby Peckett W4 0-4-0 'Lady Cornelia' No.33

Peckett W4 0-4-0 'Lady Cornelia' No.33 Includes: - Detailed body and cab parts - Diecast body and running pate - Printed name plates on boiler side - NEM couplings and pockets - DCC Ready 4 PIN DCC Socket - OO Scale  

Hornby Class 153 FGW No.153361 - Era 10

Class 153 FGW No.153361 Includes: - Detailed body and chassis - Interior detail - Interior lighting - DCC Ready 21 Pin Decoder Socket - Era 10 - OO scale

Hornby LNER, J36 Class, 0-6-0, 65235 'Gough' - Era 4

LNER, J36 Class, 0-6-0, 65235 'Gough' Includes: - British Railways plain black livery - British Railways lettered Branding on tender - Cab and tender detailing - Accessory Bag - DCC Ready Socket 8 Pin Socket (NOTE: This is compatible with Hornby HM7000TXS decoders but will require a digital controller or Hornby App to operate) - NEM couplings and pockets - Era 4 - OO Scale

Hornby GB Railfreight, Class 08, 0-6-0, 08818 'Molly' - Era 11

GB Railfreight, Class 08, 0-6-0, 08818 'Molly' Includes: - Accessory bag with hose pipe detail - GBRF Blue and orange livery - Cab detail - Sprung buffers - 8 Pin Socket DCC Ready - Era 11 - OO Scale

Hornby BR, Thompson Class L1, 2-6-4T, E9011 - Era 4

BR, Thompson Class L1, 2-6-4T, E9011 - Era 4 Includes: - Post War British Railways Apple green, lined livery - Plain Gill Sans lettering - Finely detailed bodywork - Cab interior and exterior parts - Metal sprung buffers - NEM couplings and pockets - 5 pole skew wound motor - 8 PIN DCC Socket  - Accessory bag - OO Scale

Hornby Inter-City 125 High Speed Digital Train Set (Sound Fitted) (TT)

Inter-City 125 High Speed Digital Train Set (With Sound) This train set includes: Class 43 HST power car numbered E43063 Class 43 HST dummy car numbered E43062 two Mk3 TS coaches numbered E42064 and E42065 a transformer a buffer stop a full curve a power straight a standard straight a 3rd full curve a left-hand point a re-railer. No.E43062 No. E43062 was built by British Rail Engineering Limited at Crewe in September 1977 and was outshopped in a BR blue and grey livery. The locomotive was first allocated to the Bounds Green (BN) depot and 43062 was initially part of the 254004 set. It was repainted in an InterCity Swallow livery after a few years in service. As British Railways prepared to be privatised, it sold its HSTs to Virgin in 1997, including 43062. The Class 43 locomotive was repainted in a Virgin red and black livery for use on CrossCountry services. Virgin handed over ten HST power cars in 2002. 43062 was given to Network Rail for use as part of the New Measurement Train (NMT). The locomotive was outshopped in a bright Network Rail yellow livery and because of this, the train was often referred to as the ‘Flying Banana’. The NMT travels at 125mph to monitor and record any faults on the track. 43062 was named ‘John Armitt’ after the chairman of the UK’s National Infrastructure Commission and had a red nameplate fitted. Loram UK won a Network Rail £8-million five-year contract to maintain the NMT in 2020. 43062 was recently overhauled at Loram Derby and returned to traffic in January 2024 with No. 43257 at the rear. No. E43063 No. E43063 was built by British Rail Engineering Limited at Crewe in September 1977 and outshopped in a BR blue and grey livery. The locomotive was first allocated to the Bounds Green (BN) depot and 43063 was initially part of the 254004 set. On 18th May 1991, 43063 could be seen at the Laira depot in a repainted InterCity Swallow livery and continued in service with this livery until 1997. As British Railways prepared to be privatised, it sold its HSTs to Virgin in 1997. 43063 was the first locomotive to be repainted in a Virgin CrossCountry red and black livery. Hon. Lord James Douglas-Hamilton QC & MP named the locomotive ‘Maiden Voyager’ to mark the launch of Virgin CrossCountry services, the same name given to Virgin’s first jumbo jet. Nameplates were fitted at Edinburgh station on 6th January 1997. 43063 ran in service with this name until the nameplates were removed in October 1999. In 2002, Virgin handed over 43063 to FGW who repainted it in a FGW blue and purple livery. Between 2006 and 2007, the locomotive faced an overhaul at Brush Traction and was fitted with an MTU 16V4000 R41 engine. FGW was renamed Great Western Railway in September 2015 and 43063 continued in service under the new name. Six GWR Class 43 HST power cars were stored at the Laira depot in 2020 and 43063 was among them, becoming a spares donor. - TT:120 Scale

Hornby Inter-City 125 High Speed Train Set (TT)

Inter-City 125 High Speed Train Set This train set includes: Class 43 HST power car numbered E43063 Class 43 HST dummy car numbered E43062 two Mk3 TS coaches numbered E42064 and E42065 a transformer a train controller a buffer stop a full curve a power straight a standard straight a 3rd full curve a left-hand point a re-railer. No.E43062 No. E43062 was built by British Rail Engineering Limited at Crewe in September 1977 and was outshopped in a BR blue and grey livery. The locomotive was first allocated to the Bounds Green (BN) depot and 43062 was initially part of the 254004 set. It was repainted in an InterCity Swallow livery after a few years in service. As British Railways prepared to be privatised, it sold its HSTs to Virgin in 1997, including 43062. The Class 43 locomotive was repainted in a Virgin red and black livery for use on CrossCountry services. Virgin handed over ten HST power cars in 2002. 43062 was given to Network Rail for use as part of the New Measurement Train (NMT). The locomotive was outshopped in a bright Network Rail yellow livery and because of this, the train was often referred to as the ‘Flying Banana’. The NMT travels at 125mph to monitor and record any faults on the track. 43062 was named ‘John Armitt’ after the chairman of the UK’s National Infrastructure Commission and had a red nameplate fitted. Loram UK won a Network Rail £8-million five-year contract to maintain the NMT in 2020. 43062 was recently overhauled at Loram Derby and returned to traffic in January 2024 with No. 43257 at the rear. No. E43063 No. E43063 was built by British Rail Engineering Limited at Crewe in September 1977 and outshopped in a BR blue and grey livery. The locomotive was first allocated to the Bounds Green (BN) depot and 43063 was initially part of the 254004 set. On 18th May 1991, 43063 could be seen at the Laira depot in a repainted InterCity Swallow livery and continued in service with this livery until 1997. As British Railways prepared to be privatised, it sold its HSTs to Virgin in 1997. 43063 was the first locomotive to be repainted in a Virgin CrossCountry red and black livery. Hon. Lord James Douglas-Hamilton QC & MP named the locomotive ‘Maiden Voyager’ to mark the launch of Virgin CrossCountry services, the same name given to Virgin’s first jumbo jet. Nameplates were fitted at Edinburgh station on 6th January 1997. 43063 ran in service with this name until the nameplates were removed in October 1999. In 2002, Virgin handed over 43063 to FGW who repainted it in a FGW blue and purple livery. Between 2006 and 2007, the locomotive faced an overhaul at Brush Traction and was fitted with an MTU 16V4000 R41 engine. FGW was renamed Great Western Railway in September 2015 and 43063 continued in service under the new name. Six GWR Class 43 HST power cars were stored at the Laira depot in 2020 and 43063 was among them, becoming a spares donor. - TT:120 Scale

Hornby PO, Earl of Dudley's Round Oak Works, Peckett W4 Class (Open Bac

PO, Earl of Dudley's Round Oak Works, Peckett W4 Class (Open Back Cab), 0-4-0ST, 'Lady Edith' Unofficially known as the 'Earl of Dudley's Railway', the Pensnett Railway, which served Round Oak Steel Works, originated in 1829 and became an amalgamation of the Kingswinford Railway and the Pensnett Railway. Management of the railway came under the control of the mineral agents of the Dudley Estate and in 1900, Peckett Works No. 488/1890 Lady Edith was purchased to work over the system. Rebuilt at Castle Mill Works in 1920, the locomotive survived until 1934. - 4 Pin DCC Socket - NEM coupling pockets - Era 2 - OO Scale

Hornby DCC Track Turnout Clips (pack of 20) (TT)

DCC Track Turnout Clips (pack of 20) (TT) These clips circumvent the built in isolation in our points, allowing power to always flow which is required for digital running. These clips do also have certain specific uses for analogue running. - TT:120 Scale

Hornby S&DJR, Class 4F, 0-6-0, No. 61 - Era 2

S&DJR, Class 4F, 0-6-0, No. 61 - Era 2 Includes: - Somerset & Dorset Joint Railway Prussian blue livery  - Cab detailing - Fixed metal buffers - NON NEM couplings and pockets - 3 Pole motor - 8 Pin DCC Socket - Era 2 - OO Scale

Hornby LNER, W1 Class, 'Hush Hush' Streamlined, 4-6-4, 10000 - Era 4

LNER, W1 Class, 'Hush Hush' Streamlined, 4-6-4, 10000 - Era 4 Includes: - LNER abbreviation for wartime, N.E branding in Gill Sans Font with shading - Wartime Black Livery - Accessory bag (drain cocks, pipes) - 2x extra trailing wheels for the Cartazzi truck (if your layout has sufficient curvature) - Accurate cab detail - Double Kylchap double blast-pipe arrangement - Streamlined Corridor tender - 21 Pin DCC Decoder Socket - Era 4 - OO scale

Hornby Tri-ang Railways Remembered: R2X Analogue Train Set

Tri-ang Railways Remembered: R2X Analogue Train Set  Includes: - Class 3F ‘Jinty’ No. 47606 locomotive   NOTE: this locomotive does not have a DCC Socket, but can be converted to digital by 'Hardwiring' a decoder into the model. Please ask if you have any questions or would like someone here to look into that. - LMS First Class coach with the running number 7573 - LMS Third Class coach with the running number 27424 - 1st radius starter oval (R605 Curves) - Dimensions for oval (Space Required 110x80cm) - Power clip and uncoupling ramp. - Limited Edition - OO Scale

Hornby BR Class 56 56060 'The Cardiff Rod Mill' (Sound Fitted)

BR Railfreight, Class 56, Co-Co, 56060 'The Cardiff Rod Mill' - Era 8 (TXS DCC Sound Fitted)  Includes: - Highly detailed with fine grill parts - BR railfreight two tone grey livery - Metal Sector logo - TXS DCC Sound Fitted    (NOTE: This model and sound functions can ONLY be operated with the HM7000 App via bluetooth or a DCC digital controller) - Accessory bag - Sprung buffers - NEM couplings and pockets - 5 pole motor - Model will traverse 2nd radius curves minimum (R606/R607) - Era 8 - OO Scale

Hornby GNER Class 43 HST Bo-Bo Train Pack - Era 9

GNER Class 43 HST Bo-Bo Train Pack - Era 9 Includes: - Printed Nameplates - Accessory Bag - Fine Body detail - Accurate Bogie detail - Working Head and Tail lights - All wheel pick up and drive - 21 Pin DCC Ready (The Pack requires 2x Decoders for conversion to Digital) - OO Scale 

Hornby RailRoad Grand Central HST Train Pack

Railroad Range - RailRoad Grand Central HST Train Pack Includes: - Distinctive Grand Central black and orange striped livery - Iconic Grand Central logo emblazoned on bodysides  - Power car running number, 43465 - Dummy car running number, 43484 - Power and Dummy cars have working lights. - Two etched nameplates with the legend, ‘Peter Fox 1942-2011 Platform 5’ (accessory bag for the dummy car) - 8 PIN DCC Socket (Conversion to digital is possible by using either R7336 8 Pin TXS Sound decoders or R8249 8 PIN Standard decoders) - NEM Coupling pockets - 5 Pole Skew Wound Motor - Motor bogie fitted with tracton tyres - Spare traction tyres included (For a full rake, these locomotives are perfect to run with the following Grand Central Mk3 coaches: R40440, R40441, R40442, R40443 and R40444) - OO Scale Locomotive information: Grand Central Railway purchased six Class 43 power cars and twenty-four Mk3 passenger coaches from Porterbrook Leasing in 2006. Major modifications were required for the Class 43 power cars to make them compatible with the Mk3 coaches. These included changing the train supply from three-phase to 1,000V conventional ETS, fitting jumper connections, changing the central door locking system and more modifications to the couplings and electrical systems. Grand Central launched their new London King’s Cross to Sunderland passenger service on 18 December 2007. No. 43465 was outshopped from Crewe Works in October 1977 as 43065 in an InterCity Blue and Grey livery. The locomotive entered traffic straight after at Heaton. Not long after, it was repainted into an InterCity Swallow livery. In the late 1980s, 43065 was one of eight power cars fitted with buffers and TDM multiple working equipment to make sure it could work with brand new Class 91 electric locomotives using Mk3 rolling stock. Grand Central acquired 43065 and refurbished the locomotive at Brush Traction in 2010.  It faced a renumbering change to 43465 and acquired a new Grand Central black and orange striped livery. In 2017, the Grand Central Class 43 locomotives were purchased by East Midlands Trains with the last Grand Central HST service commencing on New Year’s Eve. By 2018, 43465 was painted in an East Midlands Trains blue livery with red and orange stripes. This livery was updated for the ex-Grand Central HSTs by featuring a deeper blue gradient. 43365 is currently in service as a Rail Adventure power car and was part of Rail Adventure’s first dive onto British rails, with the company previously only being based out of Germany. No. 43484 was outshopped from Crewe Works on 25 February 1978 in a BR InterCity blue and yellow livery and was also part of unit 254015. The locomotive entered service in April of the same year. Not long after, it was repainted into an InterCity Swallow livery. In the late 1980s, 43084 was one of eight power cars fitted with buffers and TDM multiple working equipment to make sure it could work with brand new Class 91 electric locomotives using Mk3 rolling stock. Grand Central acquired 43084 and overhauled the locomotive at Brush Traction in 2010. It faced a renumbering change to 43484 and acquired a new Grand Central black and orange striped livery.  In 2017, the Grand Central Class 43 locomotives were purchased by East Midlands Trains with the last Grand Central HST service commencing on New Year’s Eve. 43484 was part of a farewell tour for the Grand Central HSTs called The Grand Farewell with the promoters being The Branch Line Society. As for temporary names, the locomotive carried ‘County of Derbyshire’ and then ‘Peter Fox 1942-2011 Platform 5’ nameplates up until the end of The Grand Farewell tour.  By 2018, 43484 was painted in an East Midlands Trains blue livery with red and orange stripes. This livery was updated for the ex-Grand Central HSTs by featuring a deeper blue gradient. 43484 is currently in service as a Rail Adventure power car and was part of Rail Adventure’s first dive onto British rails, with the company previously only being based out of Germany. 43484 was outshopped from the painters in Rail Adventure grey on 19 April 2021.

Hornby The Scotsman Digital Train Set (Sound Fitted) (TT)

The Scotsman Digital Train Set (Sound Fitted) A journey on a Pullman service would be regarded by many as the pinnacle of rail travel in the steam era. The LNER A1 4-6-2 locomotive and complimentary Pullman coaches included in this set represent how the ‘Flying Scotsman’ may have looked in the LNER heyday of the 1930s, that being the Flying Scotsman service and not the somewhat famous locomotive named after it. This service would run non-stop between Edinburgh and London, departing at 10:00 in each direction. This set contains a starter oval of track and a siding providing a good size layout for you to get started. This included circuit can be expanded with our easy to add track extension packs. This set features working lights in the coaches. Includes: 1x LNER A1 4-6-2 'Blink Bonny' Locomotive 1x Pullman Coach 'Cecilia' 1x Pullman Coach 'Chloria' 1x Pullman Brake Coach 'Car No.64 Third Class' Oval of Track Transformer Loco is DCC HM7000 TXS Sound Fitted - TT:120 Scale

Hornby The Scotsman Train Set (TT)

The Scotsman Train Set A journey on a Pullman service would be regarded by many as the pinnacle of rail travel in the steam era. The LNER A1 4-6-2 locomotive and complementary Pullman coaches included in this set represent how the Flying Scotsman™ may have looked in the LNER heyday of the 1930s, that being the Flying Scotsman service and not the somewhat famous locomotive named after it. This service would run non-stop between Edinburgh and London, departing at 10:00 in each direction. This set contains a starter oval of track and a siding providing a good size layout for you to get started. This included circuit can be expanded with our easy-to-add track extension packs. This set features working lights in the coaches. Includes: 1x LNER A1 4-6-2 'Blink Bonny' Locomotive 1x Pullman Coach 'Cecilia' 1x Pullman Coach 'Chloria' 1x Pullman Brake Coach 'Car No.64 Third Class' Oval of Track Controller Loco is DCC Ready NEXT 18 Socket - TT 1:120 Scale  

Hornby Dublo: LNER A3 4-6-2 103 'Flying Scotsman' Era 3 Gold

Hornby Dublo: LNER A3 4-6-2 103 'Flying Scotsman' Era 3 Includes: - Diecast Locomotive body (plastic tender body as per original Hornby Dublo range) - Locomotive depicts 1946 condition with Thompson renumbering scheme number 103 - Locomotive is in Right hand drive condition still. - LNER Doncaster Green Livery - High sided Non corridor tender as fitted from 1937 up to retirement in 1963. - Accessory bag - 8 PIN DCC Ready - Plaque dating the model 1946 - Exclusive Hornby Dublo replicated packaging - Gold Plated - Limited Edition - OO Scale

Hornby Dublo: LNER A3 4-6-2 4472 1963 Alan Pegler Era 5 Gold

Hornby Dublo: LNER A3 4-6-2 4472 1963 Alan Pegler Era 5  Includes: - Diecast Locomotive body (plastic tender body as per original Hornby Dublo range) - Locomotive depicts 1963-1966 - LNER Doncaster Green Livery - Corridor tender as fitted after preservation. - Red Nameplates - Accessory bag - 8 PIN DCC Ready - Plaque dating the model 1963 - Exclusive Hornby Dublo replicated packaging - Gold Plated - Limited Edition - OO Scale  

Hornby Dublo: LNER, A1 Class, 4-6-2, 4472 'Flying Scotsman' Gold

Hornby Dublo: LNER, A1 Class, 4-6-2, 4472 'Flying Scotsman' Includes: - Diecast Locomotive body (plastic tender body as per original Hornby Dublo range) - Locomotive depicts 1924 condition when the locomotive attended the Great Empire Exhitbition as number of 4472. - It is the condition the locomotive was in 1925 when the LNER and GWR exchanged locomotives to trial on each others railways. - Locomotive is in original Right hand drive condition. - LNER Doncaster Green Livery - Orginal Great Northern Railway tender with railings - Accessory bag - 8 PIN DCC Ready - Plaque dating the model 1924 - Exclusive Hornby Dublo replicated packaging - Gold Plated - Limited Edition - OO Scale

Hornby Southern Class 423 4-VEP EMU Train Pack - Era 10

Southern Class 423 4-VEP EMU Train Pack Includes: - Cab detailing - Interior seating  - Directional Lighting - Electrical connection between vehicles - 21 PIN DCC Decoder socket - Era 10 - OO scale Locomotive information and history: Poor service saw the Network SouthCentral franchise transferred from Connex Trains, later renamed Southern in 2000. No serious attempt to update the units to the new Southern brand took place with only 4-VEP unit 3514 ever being painted into Southern green livery. The introduction of the Class 377 Electrostar units gradually saw the old and high millage 4-VEPs replaced. The final regular Southern 4-VEP service took place in August 2005, while Southern 4-VEP operations came to a final end with the Sussex Slammer rail tour occurring in November.

Hornby BR, W1 Class 'Hush Hush' Streamlined, 4-6-4, 60700 - Era 4

BR, W1 Class 'Hush Hush' Streamlined, 4-6-4, 60700 Includes: - British Railways branding in Gill Sans Font - Garter Blue livery - Accessory bag (drain cocks, pipes) - 2x extra trailing wheels for the Cartazzi truck (if your layout has sufficient curvature) - Accurate cab detail - Double Kylchap double blast-pipe arrangement - Streamlined Non corridor tender type - 21 Pin DCC Decoder Socket - Era 5 - OO scale Locomotive information and history: Having completed nearly 90,000 miles of test running since new, Sir Nigel Gresley's W1 4-6-4 No. 10000 entered Darlington Works on 21 August 1935 for what was anticipated to be a major overhaul and modification. During this period Gresley decided that it was time to rebuild 10000 as a three cylinder locomotive with a conventional firetube boiler. Subsequently, 10000 was moved to the Doncaster Works on 13 October 1936 and this is where the first drawing for the modification were being prepared. When 10000 was finally released from Doncaster Works in November 1937, it was a significantly different locomotive, being fitted with a diagram 111 boiler that was very similar to the diagram 108 boiler fitted to No. 2006 'Wolf of Badenoch', and with a streamlined casing to the same pattern as the A4 class. As many components as possible from the original W1 were used in the rebuild, including the frames, which were shortened by 1 ½ feet at the front end. Other items, where needed, were sourced from the A4 class, the A3 class or, like the front bogie, from the B17 and an experimental double Kylchap blastpipe and chimney was fitted. The locomotive was turned out in Garter Blue as per some of the A4's (in 1937 this became a standard livery). The cab, while similar to that of the A4 class, 60700 was considerably longer and this led to the locomotive's tender's coal delivery chute having to be lengthened to compensate for the extra distance from the firebox doors. The original tender was retained, but with superficial modifications, such as to the curvature of the front plates and the addition of streamlined plating to the front and rear, although this was partially removed just a year later in 1938. Up to the outbreak of war in 1939 and during the war years, 10000 worked mainly on Kings Cross main line duties and with its power and smooth riding it was a popular engine with the LNER's drivers, though less so with the firemen due to the distance between the shovelling plate and the firehole door. The locomotive also became more 'fitter' friendly after April 1942 when the skirting was removed from ahead and behind the outside cylinders to improve access in wartime conditions. At this time the 10000 was painted in wartime Black livery and with only 'N E' on the tender sides. By 1946 and now repainted in Garter blue livery, the corridor tender was swapped for the streamlined non-corridor tender from 4462 (BR 60004) William Whitelaw and the locomotive was engaged in more varied duties, working occasional passenger services to Leeds and Cambridge from Kings Cross alongside the occasional 'lodging' turns to Newcastle. By 1948 under the new British Railways, the locomotive received the number 60700 and "British Railways" insignia on the tender in Gills Sans font. Following allocation to Doncaster on 25 October 1953, 60700 became a more frequent visitor to Leeds and also worked turns to Sheffield, as well as hauling Doncaster to Peterborough passenger services and various braked goods trains. In a similar circumstance to 10000 never receiving its proposed name of 'British Enterprise' in November 1929, 60700 never received its intended name of 'Pegasus', for which the nameplates were cast on 13 April 1951. At this time the locomotive lost its Garter Blue livery for the new "Express Passenger Blue" with white and black lining. After an interesting and slightly troubled life, the locomotive was scrapped at its Darlington birthplace in 1959. Interesting to note is that as 60700 was going into works for scrapping, the original marine boiler the locomotive was fitted with, had been perched on bricks as steam raising boiler outside the works and outlasted the locomotive by a few years.

Hornby BR, Class 9F, 2-10-0, 92002 - Era 4

BR, Class 9F, 2-10-0, 92002 Includes: - BR Black livery - Pipework represented in copper or heat lagging - Detailed cab interior - Accessory bag includes steam cocks - Removable coal load - 21 Pin DCC Decoder Socket - Era 4 - OO scale Locomotive information: The British Railways Standard 9F Class was a 2-10-0 steam locomotive, the last of the standardised BR designs. The Robert Riddles design was intended as a long distance heavy express freight locomotive. In total 251 of the class were produced between January 1954 and March 1960, with the final locomotive No. 92220 'Evening Star' being the last steam locomotive built by British Railways. The huge length of the 10 coupled driving wheels proved problematic when faced with tight curves, a situation that freight haulage would make inevitable. A solution was found by removing the flanges from the centre driving wheel and reducing the size on the flanges on the second and fourth driving axle's wheels.  Riddles had chosen the 2-10-0 wheel configuration in-order to spread the load of the boiler over a greater area. This meant that the boiler had to be raised considerably compared to other designs to allow the firebox to sit above the trailing driving wheels. As a result, the 9F features a distinctive void between the suspended boiler and the footplate. In operation the class proved extremely versatile. Not only did the 9F excel as a freight locomotive, but when required it also succeeded as a passenger locomotive. Reports even suggest that when 92220 'Evening Star' was used to pull the Red Dragon express service between Cardiff and London it was forced to delay its arrival to allow the restaurant services to be completed, having outperformed the normal Britannia Class locomotives used on the service.  This was not the only time 9Fs had been recorded outperforming dedicated express locomotives and on such services the locomotives were capable of running at over 90mph. This combination of high speed, fast acceleration and powerful hauling capabilities mean that many consider the class to be pinnacle of British steam locomotive design. Locomotive numbers 92165-92167 were built with a mechanical stoker. This system used a helical screw to move coal from the tender straight into the firebox. This meant that coal could be burnt a faster rate than a fireman could maintain otherwise.  Systems like this proved extremely useful on long distance American railways however in Britain it was rare for a locomotive to require such as high rate of coal delivery over a long period of time meaning that a good fireman could prove just as effective. Locomotive 92002 was the third such locomotive to be constructed by BR, being built at Crewe in 1954. The locomotive was outshopped with the BR1G tender and in the usual BR black colour scheme. The locomotive would go on to be one of the 106 locomotives withdrawn in 1967, the locomotive would not be preserved.

Hornby BR Princess Royal 'The Turbomotive' 4-6-2 46202 -Era 4 TXS Sound

BR Princess Royal 'The Turbomotive' 4-6-2 46202 Includes: - Sound Fitted with new TXS System - Accessory bag with:   - Brake rigging, Painted engine crew, front footsteps, vacume pipes - Features working Lamps (change white to red depending on direction) - Cab interior detail - Smoke deflectors (BR fitting) - Era 4 - OO scale *Requires HM7000 APP or DCC controller to operate. (Will not operate on analogue) Locomotive information and history: With the nationalisation of Britain’s railways, the ‘Princess Royal’ Class Turbomotive later shed its LMS insignia, to be replaced with the new emblem of British Rail and a black livery shortly after receiving its new crest. After a long period of general repair, Turbomotive returned to the main line in 1947 under the number 46202, continuing its function as a distinct and entirely uniquely designed steam turbine locomotive. In 1949, the locomotive suffered a turbine failure and as result of post-war budgeting of the time, it was best decided to take the locomotive from service and awaiting rebuilding into a convetional design.  Following rebuilding and completion in 1952, 46202 rolled out of Crewe works loooking very different. The rebuilding included the fitting of various Princess Coronation (Duchess) class parts and became a half way between the eariler Princess Royal class and preceding Princess Coronation class. Now in BR green livery and named "Princess Anne", the locomotive wuld only see two months of service before being involved in one of the worst railway disasters ever, at Harrow and Wealdstone. It was scrapped shortly after deemed beyond the point of saving. It is because of 46202 been scrapped, that BR designed and built 8P class "Duke of Gloucester" as a replacement.

Hornby Mallard Record Breaker Train Set

Mallard Record Breaker Train Set Includes - Gresley A4 "Mallard" 60022 British Railways Express Blue Livery - Two BR Gresley Composite Coaches - BR Gresley Brake Coach - 3rd Radius Starter Oval, with Track Pack A (includes point and buffer) - Train Controller (R7229) - Wall Plug Transformer (P9000W) - Power Connecting Track (R8206) - Hornby MidiMat (1600 x 1180mm) - Re-Railer   - OO Scale Locomotive information and history: On the 3rd of July 1938 the LNER A4 locomotive 'Mallard' set the world speed record for a steam engine at 126 mph at Stoke Bank, south of Grantham.  In 1948 under the newly formed British Railways, Mallard finally recieved the plaques on the boiler sides stating the world speed record for steam traction of 126mph. The locomotive has carried these plaques since right through to today, where the engine is kept at the National Railway Museum, York. Years later with the nationalisation of the railways the locomotive's feat was not forgotten, with 'Mallard' maintaining its celebrity status among the trainspotters of the day while continuing to haul express passenger trains along the East Coast Mainline.  This Train Set encapsulates the enduring allure of 'Mallard' as it would have appeared during the early 1950s in British Railways Express Blue Livery with matching Crimson and Cream (or Blood and Custard to some) Gresley coaching stock.

Hornby Railroad Plus: BR Class 43 'Warship', D834 'Pathfinder' Maroon

Railroad Plus BR Class 43 (Warship), Bo-Bo, D834 'Pathfinder' - BR Maroon Livery - Railroad Plus Model - DCC Ready 8 Pin Decoder Socket  - Era 6 - OO Scale

Hornby HM7000-21TXS: Bluetooth® & DCC Sound Decoder (21-pin)

HM7000-21TXS: Bluetooth® & DCC Sound Decoder (21-pin) For use with HM7000 APP

Hornby HM7000-6: Bluetooth® & DCC Decoder (6-pin)

HM7000-6: Bluetooth® & DCC Decoder (6-pin) For use with HM7000 APP 

Hornby HM7000-8TXS: Bluetooth® & DCC Sound Decoder (8-pin)

HM7000-8TXS: Bluetooth® & DCC Sound Decoder (8-pin) For use with HM7000 APP

Hornby HM7000-N18TXS: Bluetooth® & DCC Sound Decoder (Next18-pin)

HM7000-N18TXS: Bluetooth® & DCC Sound Decoder (Next18-pin)

Hornby HM7070 - Power Bank

HM7070 - Power Bank Stay-alive for use with HM7000 decoders

Hornby Rowntree & Co., Ruston & Hornsby 88DS, 0-4-0, No. 3 - Era 6

Rowntree & Co., Ruston & Hornsby 88DS, 0-4-0, No. 3 Includes:  - Cab interior detailing - Rowntrees & Co Ltd Livery - Ken Cooke nameplates on cabsides - Ruston Green Livery  - Extra side weights under the footplate as per the prototype - Electric lamps on front and rear - Separate lamp brackets - Metal buffers with heads - Heavier Buffer beam as per the prototype - Buffer guard irons - NEM coupling pockets and blanking plates - DCC Ready 6 Pin Socket - Era 6 - OO Scale Locomotive information and history: Ruston 441934 was built new for Rowntree & Co. Ltd of York, being delivered in April 1960 to join R&H 421419/1958 and 432479/1959 in the confectionery company's fleet of locomotives as No. 3. In 1979, the York factory bought a new 0-6-0 locomotive and No.3 was transferred to Rowntree's Fawdon factory in Newcastle. Rail services at Fawdon came to a halt on 30 January 1987, with No. 3 being handed over to the North York Moors Railway for preservation. After some years being moved about it was purchased in 2013 by two members of the Derwent Valley Light Railway, Glynnis and Tony Frith. 441934 has now been named Ken Cooke, in honour of the former Rowntree's York employee, D-Day veteran and holder of France's highest military honour, the Legion dHonneur. Ruston & Hornsby Ltd, of Lincoln, was formed as the result of the merger between Ruston, Proctor & Co. Ltd and Richard Hornsby & Sons Ltd on September 11, 1918 and their first narrow gauge diesel locomotive left the works on September 1, 1931. In the summer of 1932, production was moved to the larger Boultham Works, where the firm were eventually to become Britain's largest builder of diesel locomotives, with over 6,500 being built by the time production ceased in 1969. Almost as soon as the firm's 44/48HP 0-4-0 locomotives were making an appearance, an upgraded, more powerful 0-4-0 was on the drawing board. Although many of the features of the 44/48HP were retained for the new 80/88HP, such as the chain drive and running gear, a new type of transmission was fitted, along with Westinghouse airbrakes. The new power unit, Ruston's own 4VPB, delivered 80BHP at 1000rpm and was later supplanted by Ruston's improved 4VPH that delivered 88BHP, but it required compressed air to be injected into the cylinders to be able to start. While running, an air reservoir was kept charged via the braking system, but after standing idle for a period the reservoir depleted and a secondary source was required to recharge the reservoir. This was achieved by fitting a small, secondary 1½HP 'donkey' engine, giving rise to a distinctive raised cover on the right hand side of the engine compartment that differed in size and placement depending on the make of engine used. Two basic weight options were offered for the 80/88HP, of 17 tons and 20 tons, the difference being achieved by attaching weights to the outside frames, as well as to the front and rear buffer beams. In 1941, Ruston's locomotive classifications were changed, with the 80/88HP becoming 88DS (with the narrow gauge versions being assigned the DSM and DSN suffix, and the broader gauges assigned DSW). Outward appearance changes to the 'standard' locomotives were mainly confined to the cab area, with examples from mid-1947 replacing the open cab with a fully enclosed cab that featured several ad-hoc styles of front window. The final 88DS, 518494, left Boultham Works on 29 November 1967, bringing to an end a production run of 271 locomotives.  

Hornby North British Distillery Co. Ruston & Hornsby 88DS 0-4-0 - Era 6

North British Distillery Co. Ltd, Ruston & Hornsby 88DS, 0-4-0, No. 4 Includes: - Cab interior detailing - 1875 North British Railway Ochre and red frames Livery - North British Branding - No extra side weights as per the prototype - Electric lamps on front and rear  - Separate lamp brackets - Metal buffers with red shanks and heads - Heavier Buffer beam as per the prototype - Buffer guard irons - NEM coupling pockets and blanking plates - DCC Ready 6 Pin Socket - Era 6 - OO Scale Locomotive information and history: Ruston 421415 was built new for the North British Distillery Co. Ltd, being delivered in March 1958 to their distillery in the Gorgie district of Edinburgh, around the period when the distillery was expanding to include the former Edinburgh Corporation Tramways depot. In 1973, the locomotive was donated to the fledgling Fife Railway Preservation Group, who located it at the Lochty Private Railway until its demise in 1994. 421415, now numbered NBD No. 4, has now been restored and wears the livery of the North British Railway. Ruston & Hornsby Ltd, of Lincoln, was formed as the result of the merger between Ruston, Proctor & Co. Ltd and Richard Hornsby & Sons Ltd on September 11, 1918 and their first narrow gauge diesel locomotive left the works on September 1, 1931. In the summer of 1932, production was moved to the larger Boultham Works, where the firm were eventually to become Britain's largest builder of diesel locomotives, with over 6,500 being built by the time production ceased in 1969. Almost as soon as the firm's 44/48HP 0-4-0 locomotives were making an appearance, an upgraded, more powerful 0-4-0 was on the drawing board. Although many of the features of the 44/48HP were retained for the new 80/88HP, such as the chain drive and running gear, a new type of transmission was fitted, along with Westinghouse airbrakes. The new power unit, Ruston's own 4VPB, delivered 80BHP at 1000rpm and was later supplanted by Ruston's improved 4VPH that delivered 88BHP, but it required compressed air to be injected into the cylinders to be able to start. While running, an air reservoir was kept charged via the braking system, but after standing idle for a period the reservoir depleted and a secondary source was required to recharge the reservoir. This was achieved by fitting a small, secondary 1½HP 'donkey' engine, giving rise to a distinctive raised cover on the right hand side of the engine compartment that differed in size and placement depending on the make of engine used. Two basic weight options were offered for the 80/88HP, of 17 tons and 20 tons, the difference being achieved by attaching weights to the outside frames, as well as to the front and rear buffer beams. In 1941, Ruston's locomotive classifications were changed, with the 80/88HP becoming 88DS (with the narrow gauge versions being assigned the DSM and DSN suffix, and the broader gauges assigned DSW). Outward appearance changes to the 'standard' locomotives were mainly confined to the cab area, with examples from mid-1947 replacing the open cab with a fully enclosed cab that featured several ad-hoc styles of front window. The final 88DS, 518494, left Boultham Works on 29 November 1967, bringing to an end a production run of 271 locomotives.

Hornby BR, Ruston & Hornsby 88DS, 0-4-0, Dept No. 84 - Era 6

BR, Ruston & Hornsby 88DS, 0-4-0, Dept No. 84 (York Based Engine) Includes:  - Cab interior detailing - British Railways - North Eastern Region - Civil Engineering Dept Branding - No extra side weights as per the prototype - Electric lamps on front and rear - Separate lamp brackets - Metal buffers with red shanks and heads - Heavier Buffer beam as per the prototype - Buffer guard irons - NEM coupling pockets and blanking plates - DCC Ready 6 Pin Socket - Era 6 - OO Scale Locomotive information and history: Ruston 432478 was built new for British Railways, being delivered in January 1959 to the North Eastern Region Civil Engineers Department at the Leeman Road Permanent Way Stockyard in York, one of six Ruston & Hornsby 88DS locomotives built for British Railways which were distributed between York, Dinsdale Depot, Etherley Tip, Crofton, Hartlepool and Darlington. As well as working shunting duties at Leeman Road, 432478 also worked at the York Central Concrete Depot, which is now the site of the Railway Museum's main visitor car park. Ruston & Hornsby Ltd, of Lincoln, was formed as the result of the merger between Ruston, Proctor & Co. Ltd and Richard Hornsby & Sons Ltd on September 11, 1918 and their first narrow gauge diesel locomotive left the works on September 1, 1931. In the summer of 1932, production was moved to the larger Boultham Works, where the firm were eventually to become Britain's largest builder of diesel locomotives, with over 6,500 being built by the time production ceased in 1969. Almost as soon as the firm's 44/48HP 0-4-0 locomotives were making an appearance, an upgraded, more powerful 0-4-0 was on the drawing board. Although many of the features of the 44/48HP were retained for the new 80/88HP, such as the chain drive and running gear, a new type of transmission was fitted, along with Westinghouse airbrakes. The new power unit, Ruston's own 4VPB, delivered 80BHP at 1000rpm and was later supplanted by Ruston's improved 4VPH that delivered 88BHP, but it required compressed air to be injected into the cylinders to be able to start. While running, an air reservoir was kept charged via the braking system, but after standing idle for a period the reservoir depleted and a secondary source was required to recharge the reservoir. This was achieved by fitting a small, secondary 1½HP 'donkey' engine, giving rise to a distinctive raised cover on the right hand side of the engine compartment that differed in size and placement depending on the make of engine used. Two basic weight options were offered for the 80/88HP, of 17 tons and 20 tons, the difference being achieved by attaching weights to the outside frames, as well as to the front and rear buffer beams. In 1941, Ruston's locomotive classifications were changed, with the 80/88HP becoming 88DS (with the narrow gauge versions being assigned the DSM and DSN suffix, and the broader gauges assigned DSW). Outward appearance changes to the 'standard' locomotives were mainly confined to the cab area, with examples from mid-1947 replacing the open cab with a fully enclosed cab that featured several ad-hoc styles of front window. The final 88DS, 518494, left Boultham Works on 29 November 1967, bringing to an end a production run of 271 locomotives.  

Hornby BR, Class 60, Co-Co, 60001 'Steadfast' - Era 8

BR, Class 60, Co-Co, 60001 'Steadfast' No. 60001, the first of the Class 60s to be delivered, was handed over to British Rail in 1989 after being ordered only 13 months earlier. The locomotive was named 'Steadfast' as the result of a suggestion competition. 'Steadfast' would go on to be operated by EWS until an engine failure in 2006, which forced the locomotive out of service until an overhaul in 2013. - 21 Pin DCC Decoder Socket - Era 8 - OO Scale

Hornby HM Queen Elizabeth II Platinum Jubilee HST Train Pack

HM Queen Elizabeth II Platinum Jubilee HST Train Pack - OO scale Includes - Accessory Bag - Fine Body detail - Accurate Bogie detail - Working Head and Tail lights - All wheel pick up and drive - 21 Pin DCC Ready (The Pack requires 2x Decoders for conversion to Digital) - OO Scale    Locomotive information and History: The Class 43 HST is a legend of the rails, the fastest diesel locomotive to ever operate in the United Kingdom. Since 1975 these powerful Bo-Bo locomotives have moved passengers across the country for business and for leisure, most ironically in their various BR guises. The Class 43 persists to this day as a stalwart of the rails under various operators including the mainline serving GWR, mainline maintaining Network Rail and some private operators such as Locomotive Services Limited on their Blue Pullman services.  This train pack, designed to commemorate the Platinum Jubilee of Her Majesty Queen Elizabeth II depicts the Class 43 as they have never been seen before, in a livery questioning exactly how the legendary LNER would celebrate this special occasion if they were still operating, and nationalisation had never occurred. It would be nice to think that if the big four were never nationalised that we would still be able to see steam regularly on the mainline however this view is shrouded in nostalgia and ignores the operational benefits that diesel locomotives bring. If the LNER operated continuously into the modern era, this may be how they would mark this special occasion. The power cars in this set, while adorned with numbers that have been assigned to full size units, have had numbers chosen to celebrate prominent years of the queen’s reign. 43052 has been chosen as part of the numbering pattern for the full size examples and 52 for the year of the coronation, and 43022 follows the same pattern but for this very special year of Her Majesties reign.

Hornby Mk4 Driving Van Trailer (DVT) - GNER Livery

Mk4 Driving Van Trailer (DVT) - GNER Livery Built at Metro-Cammell's Washwood Heath factory, 314 Mk4 coaches were produced between 1989 and 1992. They were built specifically for use on the newly electrified East Coast Main Line, along with hopes that a second order for the West Coast Main Line would be placed at a later date, although this second order never transpired. Mk4 coaches featured many improvements over the Mk3s such as push-button operated plug-type doors, fully sealed gangways and a designed top speed of 140mph. Much of the Mk4 design was based upon the Advanced Passenger Train. In particular, Mk4 coaches feature sides profiled to allow a tilt of up to 6° with newly fitted tilting bogies. Mk4s entered service in 1989 and helped drive a significant increase in passenger traffic. With privatisation in 1996, all Mk4 coaches were sold to Evershot Rail Group who have since leased them out to the holder of the InterCity East Coast Franchise. The franchise was initially awarded to Great North Eastern Railway (GNER) and has since been operated by National Express East Coast, East Coast, Virgin Trains East Coast and London North Eastern Railway (LNER) owned by the Department for Transport. Between October 2003 and November 2005 Bombardier Transportation, under contract from GNER, commenced refurbishment of the Mk4 stock, fitting new seating arrangements and introduced onboard Wi-Fi, a first for British rail services. This refurbishment programme was called 'Project Mallard' named after the Mallard steam locomotive, built in the 1930s by the London & North Eastern Railway and holder of the world speed record for steam locomotives. Built by Metro-Cammell for inclusion in the InterCity 225 sets, 32 Mk4 Driving Van Trailers (DVTs) were built with the bodyshell manufactured under sub-contract by Breda in Italy. Whilst they were designed to operate with Class 91 locomotives as part of the InterCity 225 set, Mk4 DVTs have also operated with Class 90 and Class 89 locomotives. Although Mk4 DVTs have spent most of their lives on the ECML, they are now being cascaded down to other franchises including Transport for Wales due to the introduction of the Class 800 and Class 801 IEPs. Includes - Buffer and cab front detailing - Working Lights - Accessory Bag  - 21 PIN DCC Ready Socket - OO Scale

Hornby LNER A1 Class 4-6-2 4472 'Flying Scotsman' - Era 3

LNER A1 Class 4-6-2 4472 'Flying Scotsman' in 1928 -1934 Condition Includes - Accessory bag - 3 Pole motor with brass fly wheel - 8 PIN DCC Ready socket (recommend decoder R8249 for conversion to digital) - Railroad Range - OO scale

Hornby LNER A4 Class 4-6-2 4468 ‘Mallard’ - Era 3

LNER A4 Class 4-6-2 4468 ‘Mallard’ in 1938 condition Includes - Accessory bag includes brake rigging and vacume pipes - 3 Pole motor with brass fly wheel - 8 PIN DCC Ready socket (NOTE: This model is compatiable with the HM7000TXS Sound File decoders. This will require the Hornby HM7000 App or a suitable Digital Controller to operate) - NEM Couplings and Pockets - Will traverse 2nd raidus curves minimum (R606, R607) - Railroad Range - OO scale

Hornby BR Class 264 'Pug' 0-4-0ST 56025 'Smokey Joe' - Era 4/5

Caledonian Railway Class 264 'Pug' 0-4-0ST BR Black 56025 'Smokey Joe' Includes - British Railways Lined Black livery - Smokey Joe motif on boiler sides. - Diecast chassis  - Cab detail - Large fixed tension lock couplings. - NO DCC Socket   NOTE: (this model has no socket for DCC decoders. However a decoder can be 'Hardwired' into the model with great care). Please ask for further advice or if you would like us to install a decoder for you. - OO Scale

Hornby Flying Scotsman Train Set

Flying Scotsman Train Set Includes - LNER Class A1 "Flying Scotsman" in 1928 condition    DCC Ready Locomotive (requires 8 Pin Decoder to become Digital)  - 2x LNER Teak Composite Coaches - 1x LNER Teak Brake Coach  - 3rd Radius oval of track with Track Pack A (includes point and buffer stop) - (R7229) Analogue Controller - (P9000W) Wall plug transformer  - Midi Trackmat (1600mm x 1180mm or Approx 6ft x 4ft) - Rerailer  - OO scale