EFE Rail Class 23 'Baby Deltic' Headcode Box D5901 BR Green (SYP) (N)

Class 23 'Baby Deltic' H/code Box D5901 BR Green (SYP) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: With TOPS panel applied before moving to the Railway Technical Centre Pristine BR Green (Small Yellow Panels) livery Running No. D5901 Centre Headcode Panels Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Headcode Box D5903 BR Green (FYE) (N)

Class 23 'Baby Deltic' Headcode Box D5903 BR Green (FYE) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green (Full Yellow Ends) livery Running No. D5903 Centre Headcode Panels Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Headcode Box D5905 BR Green (SYP) (N)

Class 23 'Baby Deltic' H/code Box D5905 BR Green (SYP) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green (Small Yellow Panels) livery Running No. D5905 Centre Headcode Panels Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Headcode Box D5908 BR Green (FYE) (N)

Class 23 'Baby Deltic' Headcode Box D5908 BR Green (FYE) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green (Full Yellow Ends) livery Running No. D5908 Centre Headcode Panels Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Headcode Box D5909 BR Blue (N)

Class 23 'Baby Deltic' Headcode Box D5909 BR Blue Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Blue livery Running No. D5909 Centre Headcode Panels Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Disc Headcode D5902 BR Green (Late) (N)

Class 23 'Baby Deltic' Disc Headcode D5902 BR Green (Late) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green Late Crest livery Running No. D5902 Disc Headcodes Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Disc Headcode D5906 BR Green (Late) (N)

Class 23 'Baby Deltic' Disc Headcode D5906 BR Green (Late) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green Late Crest livery Running No. D5906 Disc Headcodes Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Disc Headcode D5907 BR Green (Late) (N)

Class 23 'Baby Deltic' Disc Headcode D5907 BR Green (Late) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green Late Crest livery Running No. D5907 Disc Headcodes Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Disc Headcode D5909 BR Green (Late) (N)

Class 23 'Baby Deltic' Disc Headcode D5909 BR Green (Late) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green Late Crest livery Running No. D5909 Disc Headcodes Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Headcode Box D5900 BR Green (SYP) (N)

Class 23 'Baby Deltic' H/code Box D5900 BR Green (SYP) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green (Small Yellow Panels) livery Running No. D5900 Centre Headcode Panels Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail LSWR Adams T3 560 SR Lined Maunsell Green

LSWR Adams T3 560 SR Lined Maunsell Green The first LSWR T3 Class locomotive was built in 1892 and 125 years later, the T3 was thrown into the spotlight when the National Railway Museum donated the sole preserved example, No. 563, to the Swanage Railway Trust. Ever since this controversial move there has been a desire to see a OO scale model of this Victorian masterpiece, and now, we are delighted to fulfil those wishes with this brand-new model developed for Bachmann’s EFE Rail range. Employing a large number of diecast metal components to provide the optimal weight distribution needed for this 4-4-0 locomotive to perform at its best, the EFE Rail T3 is powered by a five pole motor and flywheel which is geared to the rear driving axle. DCC provision comes in the form of a Next18 decoder socket mounted in the tender, where a speaker is also fitted, meanwhile within the cab of the model a firebox lighting system has been installed which operates on both analogue and DCC. An innovative loco-to-tender coupling design provides both integral electrical connections and a close coupling feature, whilst at either end of the model NEM coupling pockets are fitted and sprung metal buffers are mounted on each bufferbeam. Each model sports an array of locomotive- and era-specific detailing as appropriate, all of which is highlighted by the ornate livery application. Details on this Model: Pristine SR Lined Maunsell Green livery Running No. 560 Etched Numberplates* Adams Boiler Drummond Chimney Adams Smokebox Door Rivetted Smokebox Saddle Traditional Suspension Fluted Coupling Rods Rear Bogie Wheel Splashers* Single Whistle Welded Lamp Irons SR Disc Head Signals* Tender Coal Rails *supplied separately for optional fitting Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 228mm (over couplings) Five pole motor with flywheel mounted in the locomotive, driving the rear set of driving wheels Electrical pickup from all driving wheels and tender wheels Separate metal bearings fitted to each driving wheel axle and each bogie wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis fitted to both the locomotive and tender Gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Discreet snap-together locomotive to tender drawbar with integral close coupling mechanism and electrical connections Sprung front bogie Front bogie features a clip-in front section with optional blank filler or coupling adapter with integral coupling pocket to NEM362 standards Tender features a close coupling mechanism which is fitted with a coupling pocket to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Firebox lighting with twin LEDs operating on DC and DCC Textured filter in the firebox hole to simulate a burning coal fire Twin speakers installed in the tender of all models for optimum sound reproduction - Era 3 - OO Scale