Dapol Class 59/0 59002 "Alan J Day" MRL Mendip Rail (Sound/Smoke)

Class 59/0 59002 "Alan J Day" MRL Mendip Rail (Sound/Smoke Fitted) - OO Scale The Class 59 is a Co-Co formation diesel locomotive and the first US produced, privately-owned locomotive to operate regularly in the UK. The ordering of the first Class 59 was a result of quarry company Foster Yeomans dissatisfaction with the performance of the BR Class 56. The first 4 locomotives built by GMs Electromotive Division were delivered to Foster Yeoman during 1986 and 59005 in 1989. Proving very successful; one locomotive setting a new UK haulage record for a single locomotive of 4639 tonnes. Foster Yeomans rivals, Amey Roadstone Corp. (ARC) also ordered four modified Class 59s (59/1) as did National Power, who ordered six (59/2). GM invested in this initial UK success by extensively modifying the class 59 internally to produce the Class 66, also hugely successful, within both the UK and Continental Europe. Other than 59003 (which after return from loan to HHPI in Germany, is operated by GBRf), the Class 59 fleet is operated today by DB Schenker and Mendip Rail (an ARC and FY joint venture). Model Based on the huge success of the first production run of OO Gauge Class 59’s Dapol have decided to announce the launch of the second production run of this fantastic model. These models will feature lots of era specific details and markings and lots of external body details. They will also include a fully detailed cab. Features DCC fitted Sound Module Installed Smoke Unit Installed Finely moulded body with many applied fine details Printed name plates (Etched plates supplied separately) Cast wheels with fine relief and appropriate colouring Heavy diecast chassis with all wheel pick up NEM coupling pockets as standard All class 59 versions tooled Operating, independently controlled headlight and cab lights (all lighting variations tooled) DCC controlled fully independent lighting: Push/Pull and light engine modes for head and tail lights Day/Night headlamp selection Marker lamp control (where applicable) Independent cab lighting (leading cab /trailing cab /off) (DCC Only) Optional clag smoke simulation on initial acceleration

Dapol SR BOB Class '34066' "Spitfire" BR Green (Late) (N)

SR BOB Class '34066' "Spitfire" BR Green (Late) The Southern Region West Country and Battle of Britain classes with their 4-6-2 wheel arrangement were also known as Light Pacifics or informally as Spam Cans due to their unorthodox appearance. The class was designed by Oliver Bulleid and developed to be cheaper and easier to build using much of the innovations developed during wartime. The Battle of Britain Class and its sister, the Merchant Navy Class were the first to use welded steel in the manufacture of many key components, which reduced weight and building time. In all 110 were built between 1945 and 1950 and continued into service until the end of the steam era on the Southern Region in 1967. Due to some initial design limitations,  fifty of the class were rebuilt during the late 1950s, after which they resembled the rebuilt Merchant Navy Class. Twenty of the class survive into preservation.  Features: NEXT-18 Decoder Socket Powerful new coreless motor mounted in the locomotive boiler Robust locomotive to tender connection with electrical pick up from all locomotive driving wheels and tender wheels Heavy diecast chassis with weight balanced low down and over the driving wheels offering superb traction and pulling power The overall weight of the loco and tender is 102g. The loco without tender is 81g Highly detailed injection moulded locomotive and tender body with exquisite plate and rivet detail accurately recreated  Partial chassis compensation for smooth running and to aid electrical pick up  Many prototype specific details including three cab types, two tender versions, long and short smoke deflectors Superb dicast wheels· Firebox glow effect  Standard NEM fitting N Gauge couplers Printed name plates  Accessory bag with etched nameplates and detailed buffer beam fittings  - N Scale 

Dapol SR BOB Class '34081' "92 Squadron" Malachite Green BR (N)

SR BOB Class '34081' "92 Squadron" Malachite Green BR The Southern Region West Country and Battle of Britain classes with their 4-6-2 wheel arrangement were also known as Light Pacifics or informally as Spam Cans due to their unorthodox appearance. The class was designed by Oliver Bulleid and developed to be cheaper and easier to build using much of the innovations developed during wartime. The Battle of Britain Class and its sister, the Merchant Navy Class were the first to use welded steel in the manufacture of many key components, which reduced weight and building time. In all 110 were built between 1945 and 1950 and continued into service until the end of the steam era on the Southern Region in 1967. Due to some initial design limitations,  fifty of the class were rebuilt during the late 1950s, after which they resembled the rebuilt Merchant Navy Class. Twenty of the class survive into preservation.  Features: NEXT-18 Decoder Socket Powerful new coreless motor mounted in the locomotive boiler Robust locomotive to tender connection with electrical pick up from all locomotive driving wheels and tender wheels Heavy diecast chassis with weight balanced low down and over the driving wheels offering superb traction and pulling power The overall weight of the loco and tender is 102g. The loco without tender is 81g Highly detailed injection moulded locomotive and tender body with exquisite plate and rivet detail accurately recreated  Partial chassis compensation for smooth running and to aid electrical pick up  Many prototype specific details including three cab types, two tender versions, long and short smoke deflectors Superb dicast wheels· Firebox glow effect  Standard NEM fitting N Gauge couplers Printed name plates  Accessory bag with etched nameplates and detailed buffer beam fittings  - N Scale 

Dapol SR WC Class '21C113' "Okehampton" Malachite Green (N)

SR WC Class '21C113' "Okehampton" Malachite Green The Southern Region West Country and Battle of Britain classes with their 4-6-2 wheel arrangement were also known as Light Pacifics or informally as Spam Cans due to their unorthodox appearance. The class was designed by Oliver Bulleid and developed to be cheaper and easier to build using much of the innovations developed during wartime. The Battle of Britain Class and its sister, the Merchant Navy Class were the first to use welded steel in the manufacture of many key components, which reduced weight and building time. In all 110 were built between 1945 and 1950 and continued into service until the end of the steam era on the Southern Region in 1967. Due to some initial design limitations,  fifty of the class were rebuilt during the late 1950s, after which they resembled the rebuilt Merchant Navy Class. Twenty of the class survive into preservation.  Features: NEXT-18 Decoder Socket Powerful new coreless motor mounted in the locomotive boiler Robust locomotive to tender connection with electrical pick up from all locomotive driving wheels and tender wheels Heavy diecast chassis with weight balanced low down and over the driving wheels offering superb traction and pulling power The overall weight of the loco and tender is 102g. The loco without tender is 81g Highly detailed injection moulded locomotive and tender body with exquisite plate and rivet detail accurately recreated  Partial chassis compensation for smooth running and to aid electrical pick up  Many prototype specific details including three cab types, two tender versions, long and short smoke deflectors Superb dicast wheels· Firebox glow effect  Standard NEM fitting N Gauge couplers Printed name plates  Accessory bag with etched nameplates and detailed buffer beam fittings  - N Scale 

Dapol SR WC Class '34001' "Exeter" BR Green (Early) (N)

SR WC Class '34001' "Exeter" BR Green (Early) The Southern Region West Country and Battle of Britain classes with their 4-6-2 wheel arrangement were also known as Light Pacifics or informally as Spam Cans due to their unorthodox appearance. The class was designed by Oliver Bulleid and developed to be cheaper and easier to build using much of the innovations developed during wartime. The Battle of Britain Class and its sister, the Merchant Navy Class were the first to use welded steel in the manufacture of many key components, which reduced weight and building time. In all 110 were built between 1945 and 1950 and continued into service until the end of the steam era on the Southern Region in 1967. Due to some initial design limitations,  fifty of the class were rebuilt during the late 1950s, after which they resembled the rebuilt Merchant Navy Class. Twenty of the class survive into preservation.  Features: NEXT-18 Decoder Socket Powerful new coreless motor mounted in the locomotive boiler Robust locomotive to tender connection with electrical pick up from all locomotive driving wheels and tender wheels Heavy diecast chassis with weight balanced low down and over the driving wheels offering superb traction and pulling power The overall weight of the loco and tender is 102g. The loco without tender is 81g Highly detailed injection moulded locomotive and tender body with exquisite plate and rivet detail accurately recreated  Partial chassis compensation for smooth running and to aid electrical pick up  Many prototype specific details including three cab types, two tender versions, long and short smoke deflectors Superb dicast wheels· Firebox glow effect  Standard NEM fitting N Gauge couplers Printed name plates  Accessory bag with etched nameplates and detailed buffer beam fittings  - N Scale 

Dapol SR WC Class '34030' "Watersmeet" BR Green (Late) (N)

SR WC Class '34030' "Watersmeet" BR Green (Late) The Southern Region West Country and Battle of Britain classes with their 4-6-2 wheel arrangement were also known as Light Pacifics or informally as Spam Cans due to their unorthodox appearance. The class was designed by Oliver Bulleid and developed to be cheaper and easier to build using much of the innovations developed during wartime. The Battle of Britain Class and its sister, the Merchant Navy Class were the first to use welded steel in the manufacture of many key components, which reduced weight and building time. In all 110 were built between 1945 and 1950 and continued into service until the end of the steam era on the Southern Region in 1967. Due to some initial design limitations,  fifty of the class were rebuilt during the late 1950s, after which they resembled the rebuilt Merchant Navy Class. Twenty of the class survive into preservation.  Features: NEXT-18 Decoder Socket Powerful new coreless motor mounted in the locomotive boiler Robust locomotive to tender connection with electrical pick up from all locomotive driving wheels and tender wheels Heavy diecast chassis with weight balanced low down and over the driving wheels offering superb traction and pulling power The overall weight of the loco and tender is 102g. The loco without tender is 81g Highly detailed injection moulded locomotive and tender body with exquisite plate and rivet detail accurately recreated  Partial chassis compensation for smooth running and to aid electrical pick up  Many prototype specific details including three cab types, two tender versions, long and short smoke deflectors Superb dicast wheels· Firebox glow effect  Standard NEM fitting N Gauge couplers Printed name plates  Accessory bag with etched nameplates and detailed buffer beam fittings  - N Scale 

Dapol SR BOB Class '21C164' "Fighter Command" Malachite Green (N)

SR BOB Class '21C164' "Fighter Command" Malachite Green The Southern Region West Country and Battle of Britain classes with their 4-6-2 wheel arrangement were also known as Light Pacifics or informally as Spam Cans due to their unorthodox appearance. The class was designed by Oliver Bulleid and developed to be cheaper and easier to build using much of the innovations developed during wartime. The Battle of Britain Class and its sister, the Merchant Navy Class were the first to use welded steel in the manufacture of many key components, which reduced weight and building time. In all 110 were built between 1945 and 1950 and continued into service until the end of the steam era on the Southern Region in 1967. Due to some initial design limitations,  fifty of the class were rebuilt during the late 1950s, after which they resembled the rebuilt Merchant Navy Class. Twenty of the class survive into preservation.  Features: NEXT-18 Decoder Socket Powerful new coreless motor mounted in the locomotive boiler Robust locomotive to tender connection with electrical pick up from all locomotive driving wheels and tender wheels Heavy diecast chassis with weight balanced low down and over the driving wheels offering superb traction and pulling power The overall weight of the loco and tender is 102g. The loco without tender is 81g Highly detailed injection moulded locomotive and tender body with exquisite plate and rivet detail accurately recreated  Partial chassis compensation for smooth running and to aid electrical pick up  Many prototype specific details including three cab types, two tender versions, long and short smoke deflectors Superb dicast wheels· Firebox glow effect  Standard NEM fitting N Gauge couplers Printed name plates  Accessory bag with etched nameplates and detailed buffer beam fittings  - N Scale   

Dapol SR BOB Class '34051' "Winston Churchill" BR Green (Late) (N)

SR BOB Class '34051' "Winston Churchill" BR Green (Late) The Southern Region West Country and Battle of Britain classes with their 4-6-2 wheel arrangement were also known as Light Pacifics or informally as Spam Cans due to their unorthodox appearance. The class was designed by Oliver Bulleid and developed to be cheaper and easier to build using much of the innovations developed during wartime. The Battle of Britain Class and its sister, the Merchant Navy Class were the first to use welded steel in the manufacture of many key components, which reduced weight and building time. In all 110 were built between 1945 and 1950 and continued into service until the end of the steam era on the Southern Region in 1967. Due to some initial design limitations,  fifty of the class were rebuilt during the late 1950s, after which they resembled the rebuilt Merchant Navy Class. Twenty of the class survive into preservation.  Features: NEXT-18 Decoder Socket Powerful new coreless motor mounted in the locomotive boiler Robust locomotive to tender connection with electrical pick up from all locomotive driving wheels and tender wheels Heavy diecast chassis with weight balanced low down and over the driving wheels offering superb traction and pulling power The overall weight of the loco and tender is 102g. The loco without tender is 81g Highly detailed injection moulded locomotive and tender body with exquisite plate and rivet detail accurately recreated  Partial chassis compensation for smooth running and to aid electrical pick up  Many prototype specific details including three cab types, two tender versions, long and short smoke deflectors Superb dicast wheels· Firebox glow effect  Standard NEM fitting N Gauge couplers Printed name plates  Accessory bag with etched nameplates and detailed buffer beam fittings  - N Scale 

Dapol SR BOB Class '34063' "229 Squadron" BR Green (Early) (N)

SR BOB Class '34063' "229 Squadron" BR Green (Early)  The Southern Region West Country and Battle of Britain classes with their 4-6-2 wheel arrangement were also known as Light Pacifics or informally as Spam Cans due to their unorthodox appearance. The class was designed by Oliver Bulleid and developed to be cheaper and easier to build using much of the innovations developed during wartime. The Battle of Britain Class and its sister, the Merchant Navy Class were the first to use welded steel in the manufacture of many key components, which reduced weight and building time. In all 110 were built between 1945 and 1950 and continued into service until the end of the steam era on the Southern Region in 1967. Due to some initial design limitations,  fifty of the class were rebuilt during the late 1950s, after which they resembled the rebuilt Merchant Navy Class. Twenty of the class survive into preservation.  Features: NEXT-18 Decoder Socket Powerful new coreless motor mounted in the locomotive boiler Robust locomotive to tender connection with electrical pick up from all locomotive driving wheels and tender wheels Heavy diecast chassis with weight balanced low down and over the driving wheels offering superb traction and pulling power The overall weight of the loco and tender is 102g. The loco without tender is 81g Highly detailed injection moulded locomotive and tender body with exquisite plate and rivet detail accurately recreated  Partial chassis compensation for smooth running and to aid electrical pick up  Many prototype specific details including three cab types, two tender versions, long and short smoke deflectors Superb dicast wheels· Firebox glow effect  Standard NEM fitting N Gauge couplers Printed name plates  Accessory bag with etched nameplates and detailed buffer beam fittings  - N Scale 

Dapol LMS Ivatt 2MT '41204' BR Lined Black (Late) (N)

LMS Ivatt 2MT '41204' BR Lined Black (Late) The LMS Class 2 2-6-2 tank engines were designed by H. G. Ivatt and constructed between 1946 and 1952 to replace older locomotives.  This versatile class was built primarily for branch line duties for which their “Prairie” wheelbase was well suited. Ivatt also included several labour-saving features such as self-cleaning ashpans to improve operating economies.  Following an initial batch of ten locomotives built by the LMS, British Railways decided to enlarge the class and a further 120 examples were built.     During BR days, they were allocated to the LMR, SR and WR regions and were equally at home hauling passenger and goods services. The last member of the class was withdrawn in 1967, but four examples of this popular locomotive type have been preserved and all are presently operational. Features: Highly detailed body with many separately added parts   Expertly applied liveries  Die-cast wheels  Die-cast chassis  Keyed axles (similar to the Dapol N Gauge A4/A3) to prevent quartering slippage  DCC Raady with 6 pin decoder socket  3 pole can motor providing smooth slow speed running and a realistic top speed.  - N Scale

Dapol LMS Ivatt 2MT '41208' BR Lined Black (Early) (N)

LMS Ivatt 2MT '41208' BR Lined Black (Early) The LMS Class 2 2-6-2 tank engines were designed by H. G. Ivatt and constructed between 1946 and 1952 to replace older locomotives.  This versatile class was built primarily for branch line duties for which their “Prairie” wheelbase was well suited. Ivatt also included several labour-saving features such as self-cleaning ashpans to improve operating economies.  Following an initial batch of ten locomotives built by the LMS, British Railways decided to enlarge the class and a further 120 examples were built.     During BR days, they were allocated to the LMR, SR and WR regions and were equally at home hauling passenger and goods services. The last member of the class was withdrawn in 1967, but four examples of this popular locomotive type have been preserved and all are presently operational. Features: Highly detailed body with many separately added parts   Expertly applied liveries  Die-cast wheels  Die-cast chassis  Keyed axles (similar to the Dapol N Gauge A4/A3) to prevent quartering slippage  DCC Raady with 6 pin decoder socket  3 pole can motor providing smooth slow speed running and a realistic top speed.  - N Scale

Dapol LMS Ivatt 2MT '41227' British Railways Lined Black (N)

LMS Ivatt 2MT '41227' British Railways Lined Black The LMS Class 2 2-6-2 tank engines were designed by H. G. Ivatt and constructed between 1946 and 1952 to replace older locomotives.  This versatile class was built primarily for branch line duties for which their “Prairie” wheelbase was well suited. Ivatt also included several labour-saving features such as self-cleaning ashpans to improve operating economies.  Following an initial batch of ten locomotives built by the LMS, British Railways decided to enlarge the class and a further 120 examples were built.     During BR days, they were allocated to the LMR, SR and WR regions and were equally at home hauling passenger and goods services. The last member of the class was withdrawn in 1967, but four examples of this popular locomotive type have been preserved and all are presently operational. Features: Highly detailed body with many separately added parts   Expertly applied liveries  Die-cast wheels  Die-cast chassis  Keyed axles (similar to the Dapol N Gauge A4/A3) to prevent quartering slippage  DCC Raady with 6 pin decoder socket  3 pole can motor providing smooth slow speed running and a realistic top speed.  - N Scale

Dapol LMS Ivatt 2MT '41236' BR Lined Black (Early) (N)

LMS Ivatt 2MT '41236' BR Lined Black (Early) The LMS Class 2 2-6-2 tank engines were designed by H. G. Ivatt and constructed between 1946 and 1952 to replace older locomotives.  This versatile class was built primarily for branch line duties for which their “Prairie” wheelbase was well suited. Ivatt also included several labour-saving features such as self-cleaning ashpans to improve operating economies.  Following an initial batch of ten locomotives built by the LMS, British Railways decided to enlarge the class and a further 120 examples were built.     During BR days, they were allocated to the LMR, SR and WR regions and were equally at home hauling passenger and goods services. The last member of the class was withdrawn in 1967, but four examples of this popular locomotive type have been preserved and all are presently operational. Features: Highly detailed body with many separately added parts   Expertly applied liveries  Die-cast wheels  Die-cast chassis  Keyed axles (similar to the Dapol N Gauge A4/A3) to prevent quartering slippage  DCC Raady with 6 pin decoder socket  3 pole can motor providing smooth slow speed running and a realistic top speed.  - N Scale

Dapol LMS Ivatt 2MT '41241' KWVR Lined Crimson Lake (N)

LMS Ivatt 2MT '41241' KWVR Lined Crimson Lake The LMS Class 2 2-6-2 tank engines were designed by H. G. Ivatt and constructed between 1946 and 1952 to replace older locomotives.  This versatile class was built primarily for branch line duties for which their “Prairie” wheelbase was well suited. Ivatt also included several labour-saving features such as self-cleaning ashpans to improve operating economies.  Following an initial batch of ten locomotives built by the LMS, British Railways decided to enlarge the class and a further 120 examples were built.     During BR days, they were allocated to the LMR, SR and WR regions and were equally at home hauling passenger and goods services. The last member of the class was withdrawn in 1967, but four examples of this popular locomotive type have been preserved and all are presently operational. Features: Highly detailed body with many separately added parts   Expertly applied liveries  Die-cast wheels  Die-cast chassis  Keyed axles (similar to the Dapol N Gauge A4/A3) to prevent quartering slippage  DCC Raady with 6 pin decoder socket  3 pole can motor providing smooth slow speed running and a realistic top speed.  - N Scale

Dapol LMS Ivatt 2MT '41319' BR Lined Black (Late) (N)

LMS Ivatt 2MT '41319' BR Lined Black (Late) The LMS Class 2 2-6-2 tank engines were designed by H. G. Ivatt and constructed between 1946 and 1952 to replace older locomotives.  This versatile class was built primarily for branch line duties for which their “Prairie” wheelbase was well suited. Ivatt also included several labour-saving features such as self-cleaning ashpans to improve operating economies.  Following an initial batch of ten locomotives built by the LMS, British Railways decided to enlarge the class and a further 120 examples were built.     During BR days, they were allocated to the LMR, SR and WR regions and were equally at home hauling passenger and goods services. The last member of the class was withdrawn in 1967, but four examples of this popular locomotive type have been preserved and all are presently operational. Features: Highly detailed body with many separately added parts   Expertly applied liveries  Die-cast wheels  Die-cast chassis  Keyed axles (similar to the Dapol N Gauge A4/A3) to prevent quartering slippage  DCC Raady with 6 pin decoder socket  3 pole can motor providing smooth slow speed running and a realistic top speed.  - N Scale

Dapol LMS Ivatt 2MT '1207' LMS Unlined Black (N)

LMS Ivatt 2MT '1207' LMS Unlined Black The LMS Class 2 2-6-2 tank engines were designed by H. G. Ivatt and constructed between 1946 and 1952 to replace older locomotives.  This versatile class was built primarily for branch line duties for which their “Prairie” wheelbase was well suited. Ivatt also included several labour-saving features such as self-cleaning ashpans to improve operating economies.  Following an initial batch of ten locomotives built by the LMS, British Railways decided to enlarge the class and a further 120 examples were built.     During BR days, they were allocated to the LMR, SR and WR regions and were equally at home hauling passenger and goods services. The last member of the class was withdrawn in 1967, but four examples of this popular locomotive type have been preserved and all are presently operational. Features: Highly detailed body with many separately added parts   Expertly applied liveries  Die-cast wheels  Die-cast chassis  Keyed axles (similar to the Dapol N Gauge A4/A3) to prevent quartering slippage  DCC Raady with 6 pin decoder socket  3 pole can motor providing smooth slow speed running and a realistic top speed.  - N Scale

Dapol Class 66 '66001' EWS (O)

Class 66 '66001' EWS Features: Operating front/rear lights (independent operation for DCC, (switched for DC use) Includes day/night mode) Operating ‘side’ lights (where lighting cluster is applicable) Cab light (independent operation) Detailed cab with illuminated cab control panel Two motors (balanced & matched) for maximum pulling power and slow speed running control DC control switches to be accessible via lift-off roof panel DCC Ready with two PLUX 22 decoder sockets Etched grills now with added detail showing radiator equipment with engine room lighting Separate detail (Handrails, Handles, Grills etc.) Heavyweight Diecast chassis Diecast bogie frames  Rotating axle centres Appropriate couplings attached O gauge society wheel profiles Sprung buffers Interchangeable front buffer beams with the option for an auto coupler to be used The entire buffer beam assembly can be swapped out leaving no unsightly seams on the valance     - O Scale

Dapol Class 66 '66421' "Gresty Bridge TMD" DRS Plain Blue (O)

Class 66 '66421' "Gresty Bridge TMD" DRS Plain Blue Features: Operating front/rear lights (independent operation for DCC, (switched for DC use) Includes day/night mode) Operating ‘side’ lights (where lighting cluster is applicable) Cab light (independent operation) Detailed cab with illuminated cab control panel Two motors (balanced & matched) for maximum pulling power and slow speed running control DC control switches to be accessible via lift-off roof panel DCC Ready with two PLUX 22 decoder sockets Etched grills now with added detail showing radiator equipment with engine room lighting Separate detail (Handrails, Handles, Grills etc.) Heavyweight Diecast chassis Diecast bogie frames  Rotating axle centres Appropriate couplings attached O gauge society wheel profiles Sprung buffers Interchangeable front buffer beams with the option for an auto coupler to be used The entire buffer beam assembly can be swapped out leaving no unsightly seams on the valance     - O Scale

Dapol Class 66 '66504' Freightliner Powerhaul (O)

Class 66 '66504' Freightliner Powerhaul Features: Operating front/rear lights (independent operation for DCC, (switched for DC use) Includes day/night mode) Operating ‘side’ lights (where lighting cluster is applicable) Cab light (independent operation) Detailed cab with illuminated cab control panel Two motors (balanced & matched) for maximum pulling power and slow speed running control DC control switches to be accessible via lift-off roof panel DCC Ready with two PLUX 22 decoder sockets Etched grills now with added detail showing radiator equipment with engine room lighting Separate detail (Handrails, Handles, Grills etc.) Heavyweight Diecast chassis Diecast bogie frames  Rotating axle centres Appropriate couplings attached O gauge society wheel profiles Sprung buffers Interchangeable front buffer beams with the option for an auto coupler to be used The entire buffer beam assembly can be swapped out leaving no unsightly seams on the valance     - O Scale

Dapol Class 66 '66709' "Sorento" GBRf Europorte MSC (O)

Class 66 '66709' "Sorento" GBRf Europorte MSC Features: Operating front/rear lights (independent operation for DCC, (switched for DC use) Includes day/night mode) Operating ‘side’ lights (where lighting cluster is applicable) Cab light (independent operation) Detailed cab with illuminated cab control panel Two motors (balanced & matched) for maximum pulling power and slow speed running control DC control switches to be accessible via lift-off roof panel DCC Ready with two PLUX 22 decoder sockets Etched grills now with added detail showing radiator equipment with engine room lighting Separate detail (Handrails, Handles, Grills etc.) Heavyweight Diecast chassis Diecast bogie frames  Rotating axle centres Appropriate couplings attached O gauge society wheel profiles Sprung buffers Interchangeable front buffer beams with the option for an auto coupler to be used The entire buffer beam assembly can be swapped out leaving no unsightly seams on the valance     - O Scale

Dapol Class 66 '66783' "The Flying Dustman" GBRf Biffa (O)

Class 66 '66783' "The Flying Dustman" GBRf Biffa Features: Operating front/rear lights (independent operation for DCC, (switched for DC use) Includes day/night mode) Operating ‘side’ lights (where lighting cluster is applicable) Cab light (independent operation) Detailed cab with illuminated cab control panel Two motors (balanced & matched) for maximum pulling power and slow speed running control DC control switches to be accessible via lift-off roof panel DCC Ready with two PLUX 22 decoder sockets Etched grills now with added detail showing radiator equipment with engine room lighting Separate detail (Handrails, Handles, Grills etc.) Heavyweight Diecast chassis Diecast bogie frames  Rotating axle centres Appropriate couplings attached O gauge society wheel profiles Sprung buffers Interchangeable front buffer beams with the option for an auto coupler to be used The entire buffer beam assembly can be swapped out leaving no unsightly seams on the valance     - O Scale

Dapol Class 66 '66789' "British Rail 1949 - 1997" GBRf Large Logo (O)

Class 66 '66789' "British Rail 1949 - 1997" GBRf Large Logo  Features: Operating front/rear lights (independent operation for DCC, (switched for DC use) Includes day/night mode) Operating ‘side’ lights (where lighting cluster is applicable) Cab light (independent operation) Detailed cab with illuminated cab control panel Two motors (balanced & matched) for maximum pulling power and slow speed running control DC control switches to be accessible via lift-off roof panel DCC Ready with two PLUX 22 decoder sockets Etched grills now with added detail showing radiator equipment with engine room lighting Separate detail (Handrails, Handles, Grills etc.) Heavyweight Diecast chassis Diecast bogie frames  Rotating axle centres Appropriate couplings attached O gauge society wheel profiles Sprung buffers Interchangeable front buffer beams with the option for an auto coupler to be used The entire buffer beam assembly can be swapped out leaving no unsightly seams on the valance     - O Scale

Dapol Class 66 '66001' DB Cargo (N)

Class 66 '66001' DB Cargo  The Class 66 is a type of Co-Co heavy freight locomotive and was originally ordered by EWS to replace and update the freight fleet post privatisation in 1996. 250 Class 66s were ordered from General Motors Electromotive Division (EMD) and these were built in London, Ontario, Canada. Subsequent freight operators, Freightliner, GB Railfreight and Direct Rail Services (DRS) also ordered batches of these locomotives. Overall the locomotive has been successful in service, offering improved reliability and performance over its predecessors. However the locomotive has also had its critics, partly due to the comfort the design offered drivers and staff and probably their ubiquity, ousting many different types of British built locomotives commonly seen prior to its commissioning. As a testament to the commercial success of the Class 66, it has been certified for use in many European countries (known as the Series 66) and can be seen commonly in Germany, Poland and Sweden amongst others. During its long service, the locomotive has been modified many times including low emission variants for greener running and highly geared models for hauling heavier loads albeit at slower speeds. The Class 66 is still in operation and is used by DB, GBRf, Freightliner, DRS and Colas Rail.    Features: Smooth running 5 pole next generation motor      All wheel pickup              All wheel drive via re-worked smooth drive low maintenance mechanism              Die-cast chassis             DCC Sound ready, Next-18 decoder socket (recommended 6 function decoder) Independent directional front/rear main lighting control—day and night lighting with four light clusters being modelled                 Independent directional front/rear cab lighting control           Main lamp and cab lighting override switches for DC users (Independent front/rear control)  Two cab window designs modelled     Removable self-centring close coupling mechanism with NEM pockets     Standard NEM fitting N Gauge couplers              RP 25 wheels     Newly tooled highly detailed body and fittings   Accessory bag with etched nameplates and detailed buffer beam fittings         Clip-fit body for easy DCC fitting - N Scale

Dapol Class 66 '66096' EWS (N)

Class 66 '66096' EWS The Class 66 is a type of Co-Co heavy freight locomotive and was originally ordered by EWS to replace and update the freight fleet post privatisation in 1996. 250 Class 66s were ordered from General Motors Electromotive Division (EMD) and these were built in London, Ontario, Canada. Subsequent freight operators, Freightliner, GB Railfreight and Direct Rail Services (DRS) also ordered batches of these locomotives. Overall the locomotive has been successful in service, offering improved reliability and performance over its predecessors. However the locomotive has also had its critics, partly due to the comfort the design offered drivers and staff and probably their ubiquity, ousting many different types of British built locomotives commonly seen prior to its commissioning. As a testament to the commercial success of the Class 66, it has been certified for use in many European countries (known as the Series 66) and can be seen commonly in Germany, Poland and Sweden amongst others. During its long service, the locomotive has been modified many times including low emission variants for greener running and highly geared models for hauling heavier loads albeit at slower speeds. The Class 66 is still in operation and is used by DB, GBRf, Freightliner, DRS and Colas Rail.    Features: Smooth running 5 pole next generation motor      All wheel pickup              All wheel drive via re-worked smooth drive low maintenance mechanism              Die-cast chassis             DCC Sound ready, Next-18 decoder socket (recommended 6 function decoder) Independent directional front/rear main lighting control—day and night lighting with four light clusters being modelled                 Independent directional front/rear cab lighting control           Main lamp and cab lighting override switches for DC users (Independent front/rear control)  Two cab window designs modelled     Removable self-centring close coupling mechanism with NEM pockets     Standard NEM fitting N Gauge couplers              RP 25 wheels     Newly tooled highly detailed body and fittings   Accessory bag with etched nameplates and detailed buffer beam fittings         Clip-fit body for easy DCC fitting - N Scale

Dapol Class 66 '66531' Freightliner Racing Green (N)

Class 66 '66531' Freightliner Racing Green The Class 66 is a type of Co-Co heavy freight locomotive and was originally ordered by EWS to replace and update the freight fleet post privatisation in 1996. 250 Class 66s were ordered from General Motors Electromotive Division (EMD) and these were built in London, Ontario, Canada. Subsequent freight operators, Freightliner, GB Railfreight and Direct Rail Services (DRS) also ordered batches of these locomotives. Overall the locomotive has been successful in service, offering improved reliability and performance over its predecessors. However the locomotive has also had its critics, partly due to the comfort the design offered drivers and staff and probably their ubiquity, ousting many different types of British built locomotives commonly seen prior to its commissioning. As a testament to the commercial success of the Class 66, it has been certified for use in many European countries (known as the Series 66) and can be seen commonly in Germany, Poland and Sweden amongst others. During its long service, the locomotive has been modified many times including low emission variants for greener running and highly geared models for hauling heavier loads albeit at slower speeds. The Class 66 is still in operation and is used by DB, GBRf, Freightliner, DRS and Colas Rail.    Features: Smooth running 5 pole next generation motor All wheel pickup All wheel drive via re-worked smooth drive low maintenance mechanism Die-cast chassis DCC Sound ready, Next-18 decoder socket (recommended 6 function decoder) Independent directional front/rear main lighting control—day and night lighting with four light clusters being modelled Independent directional front/rear cab lighting control Main lamp and cab lighting override switches for DC users (Independent front/rear control)  Two cab window designs modelled     Removable self-centring close coupling mechanism with NEM pockets Standard NEM fitting N Gauge couplers RP 25 wheels Newly tooled highly detailed body and fittings Accessory bag with etched nameplates and detailed buffer beam fittings Clip-fit body for easy DCC fitting - N Scale

Dapol Class 66 '66706' "Nene Valley" GBRf Europorte (N)

Class 66 '66706' "Nene Valley" GBRf Europorte The Class 66 is a type of Co-Co heavy freight locomotive and was originally ordered by EWS to replace and update the freight fleet post privatisation in 1996. 250 Class 66s were ordered from General Motors Electromotive Division (EMD) and these were built in London, Ontario, Canada. Subsequent freight operators, Freightliner, GB Railfreight and Direct Rail Services (DRS) also ordered batches of these locomotives. Overall the locomotive has been successful in service, offering improved reliability and performance over its predecessors. However the locomotive has also had its critics, partly due to the comfort the design offered drivers and staff and probably their ubiquity, ousting many different types of British built locomotives commonly seen prior to its commissioning. As a testament to the commercial success of the Class 66, it has been certified for use in many European countries (known as the Series 66) and can be seen commonly in Germany, Poland and Sweden amongst others. During its long service, the locomotive has been modified many times including low emission variants for greener running and highly geared models for hauling heavier loads albeit at slower speeds. The Class 66 is still in operation and is used by DB, GBRf, Freightliner, DRS and Colas Rail.    Features: Smooth running 5 pole next generation motor All wheel pickup All wheel drive via re-worked smooth drive low maintenance mechanism Die-cast chassis DCC Sound ready, Next-18 decoder socket (recommended 6 function decoder) Independent directional front/rear main lighting control—day and night lighting with four light clusters being modelled Independent directional front/rear cab lighting control Main lamp and cab lighting override switches for DC users (Independent front/rear control)  Two cab window designs modelled     Removable self-centring close coupling mechanism with NEM pockets Standard NEM fitting N Gauge couplers RP 25 wheels Newly tooled highly detailed body and fittings Accessory bag with etched nameplates and detailed buffer beam fittings Clip-fit body for easy DCC fitting - N Scale

Dapol Class 66 '66734' "Platinum Jubilee" GBRf Jubilee Pink (N)

Class 66 '66734' "Platinum Jubilee" GBRf Jubilee Pink The Class 66 is a type of Co-Co heavy freight locomotive and was originally ordered by EWS to replace and update the freight fleet post privatisation in 1996. 250 Class 66s were ordered from General Motors Electromotive Division (EMD) and these were built in London, Ontario, Canada. Subsequent freight operators, Freightliner, GB Railfreight and Direct Rail Services (DRS) also ordered batches of these locomotives. Overall the locomotive has been successful in service, offering improved reliability and performance over its predecessors. However the locomotive has also had its critics, partly due to the comfort the design offered drivers and staff and probably their ubiquity, ousting many different types of British built locomotives commonly seen prior to its commissioning. As a testament to the commercial success of the Class 66, it has been certified for use in many European countries (known as the Series 66) and can be seen commonly in Germany, Poland and Sweden amongst others. During its long service, the locomotive has been modified many times including low emission variants for greener running and highly geared models for hauling heavier loads albeit at slower speeds. The Class 66 is still in operation and is used by DB, GBRf, Freightliner, DRS and Colas Rail.    Features: Smooth running 5 pole next generation motor All wheel pickup All wheel drive via re-worked smooth drive low maintenance mechanism Die-cast chassis DCC Sound ready, Next-18 decoder socket (recommended 6 function decoder) Independent directional front/rear main lighting control—day and night lighting with four light clusters being modelled Independent directional front/rear cab lighting control Main lamp and cab lighting override switches for DC users (Independent front/rear control)  Two cab window designs modelled     Removable self-centring close coupling mechanism with NEM pockets Standard NEM fitting N Gauge couplers RP 25 wheels Newly tooled highly detailed body and fittings Accessory bag with etched nameplates and detailed buffer beam fittings Clip-fit body for easy DCC fitting - N Scale

Dapol Class 66 '66779' "Evening Star" GBRf BR Lined Green (N)

Class 66 '66779' "Evening Star" GBRf BR Lined Green The Class 66 is a type of Co-Co heavy freight locomotive and was originally ordered by EWS to replace and update the freight fleet post privatisation in 1996. 250 Class 66s were ordered from General Motors Electromotive Division (EMD) and these were built in London, Ontario, Canada. Subsequent freight operators, Freightliner, GB Railfreight and Direct Rail Services (DRS) also ordered batches of these locomotives. Overall the locomotive has been successful in service, offering improved reliability and performance over its predecessors. However the locomotive has also had its critics, partly due to the comfort the design offered drivers and staff and probably their ubiquity, ousting many different types of British built locomotives commonly seen prior to its commissioning. As a testament to the commercial success of the Class 66, it has been certified for use in many European countries (known as the Series 66) and can be seen commonly in Germany, Poland and Sweden amongst others. During its long service, the locomotive has been modified many times including low emission variants for greener running and highly geared models for hauling heavier loads albeit at slower speeds. The Class 66 is still in operation and is used by DB, GBRf, Freightliner, DRS and Colas Rail.    Features: Smooth running 5 pole next generation motor All wheel pickup All wheel drive via re-worked smooth drive low maintenance mechanism Die-cast chassis DCC Sound ready, Next-18 decoder socket (recommended 6 function decoder) Independent directional front/rear main lighting control—day and night lighting with four light clusters being modelled Independent directional front/rear cab lighting control Main lamp and cab lighting override switches for DC users (Independent front/rear control)  Two cab window designs modelled     Removable self-centring close coupling mechanism with NEM pockets Standard NEM fitting N Gauge couplers RP 25 wheels Newly tooled highly detailed body and fittings Accessory bag with etched nameplates and detailed buffer beam fittings Clip-fit body for easy DCC fitting - N Scale

Dapol Class 66 '66846' Colas Rail Freight (N)

Class 66 '66846' Colas Rail Freight The Class 66 is a type of Co-Co heavy freight locomotive and was originally ordered by EWS to replace and update the freight fleet post privatisation in 1996. 250 Class 66s were ordered from General Motors Electromotive Division (EMD) and these were built in London, Ontario, Canada. Subsequent freight operators, Freightliner, GB Railfreight and Direct Rail Services (DRS) also ordered batches of these locomotives. Overall the locomotive has been successful in service, offering improved reliability and performance over its predecessors. However the locomotive has also had its critics, partly due to the comfort the design offered drivers and staff and probably their ubiquity, ousting many different types of British built locomotives commonly seen prior to its commissioning. As a testament to the commercial success of the Class 66, it has been certified for use in many European countries (known as the Series 66) and can be seen commonly in Germany, Poland and Sweden amongst others. During its long service, the locomotive has been modified many times including low emission variants for greener running and highly geared models for hauling heavier loads albeit at slower speeds. The Class 66 is still in operation and is used by DB, GBRf, Freightliner, DRS and Colas Rail.    Features: Smooth running 5 pole next generation motor All wheel pickup All wheel drive via re-worked smooth drive low maintenance mechanism Die-cast chassis DCC Sound ready, Next-18 decoder socket (recommended 6 function decoder) Independent directional front/rear main lighting control—day and night lighting with four light clusters being modelled Independent directional front/rear cab lighting control Main lamp and cab lighting override switches for DC users (Independent front/rear control)  Two cab window designs modelled     Removable self-centring close coupling mechanism with NEM pockets Standard NEM fitting N Gauge couplers RP 25 wheels Newly tooled highly detailed body and fittings Accessory bag with etched nameplates and detailed buffer beam fittings Clip-fit body for easy DCC fitting - N Scale

Dapol Class 57xx Pannier 9669 BR Black Late Crest (O)

Class 57xx Pannier 9669 BR Late Crest The 5700 class were introduced in 1929, whilst the 8750 class followed in 1933 and by 1950 863 locomotives had been constructed, making this perhaps the most successful 0-6-0. G.W.R. Classification: Group C, Route Blue, changed to yellow under B.R. B.R. Classification: 3F. Designed for shunting and short freight workings, however it soon became clear that other duties could be performed such as branch passenger working and mainline freight, being widespread across the system. The 8750 class can be distinguished from the 5700 class by the totally enclosed larger cab. Whistle shields and bunker steps with handrails were added from 1936. A new water feed was introduced in 1942 with the clack valves being fitted inside a case on top of the boiler in front of the dome, which became standard for builds after 1944. Between 1956 and 1963, thirteen 5700 locomotives were sold to the London Transport being painted in the attractive lined red livery. The NCB bought five 5700 locomotives between 1959 and 1965, with number 7754 still working in 1975. Last of class withdrawn: 1966. Preserved examples: 3650, 3738, 4612, 5764/L95, 5775/L89, 5786/L92, 7714, 7715/L99, 7752/L94, 7754, 7760/L90, 9600, 9629, 9642, 9681, 9682 Features of the 57XX & 8750 include: Diecast Chassis and footplate for excellent adhesion and pulling power Powerful 5 pole motor providing fine power control Beautifully detailed body with correct body type variations applied where relevant with many separately added details Partial representation of working inside motion and many other exquisite fine details including: Four cabs for original 57XX, Later 57XX, 8750 Collett cab and London Transport cab Sprung Buffers Removable roof, secured with magnets for ease of fitting engine crew Working cab doors, where fitted Flickering fire box glow Ash pan with correct double brake rodding Expertly applied livery Wheels conform to the new O Gauge standard, suitable for O Super Fine DCC Ready with a 21 pin decoder socket - O Scale

Dapol GWR Toplight Mainline City BR Maroon Composite 7911 S6

GWR Toplight Mainline City BR Maroon Composite 7911 S6 The Dapol OO Gauge GWR Toplight Mainline City coaches  have the following features and details:  Highly accurate injection moulded body with bolection window mouldings and frosted Toplight windows. Separate metal door and commode handles Wire end hand rails and separately applied end communication details Correct number of roof ventilators depending on the prototypical period being modelled Highly detailed chassis with vacuum tanks, battery boxes and brake linkages all to a high degree of fidelity 9ft bogie bolster with dicast side frames and split axles for electrical pick up Highly detailed interior with period specific decorations being applied Technical Specification:  Kinematic couplings with NEM pockets including special coupling bar to give close coupling Coaches are capable of negotiating R2 radius curves Sprung metal buffers Heavy Diecast chassis Internal lighting. Can be optionally DCC fitted with a six pin decoder such as the Dapol Imperium 5. - OO Scale

Dapol Streamlined Diesel Railcar W11 BR Chocolate/Cream (O)

Streamlined Diesel Railcar W11 BR Chocolate/Cream Locomotive Information: The first diesel railcar was introduced by the GWR in 1933. The innovation was to prove extremely successful and they continued in operation well into the 1960s when their use was eclipsed by the introduction of the BR first generation DMUs. The railcars art deco air smoothed styling has lead to their nickname of Flying Banana although later variants were produced to a more angular style. In all 38 GWR diesel railcars were produced from 1933 to 1942 at three different sites with three surviving into preservation. Includes: - Operating Directional lighting - Operating passenger compartment lighting which includes working wall lights - Cab light - On appropriate models the lamp bracket can be exchanged for a working tail lamp for prototypical running - Easy DCC fitting via removable plate. - 21 PIN DCC Ready  - Detailed cab interior - Removable gearbox covers (supplied in accessory pack) - Decorated seating - Flush glazing with a single window posed in the slid open position for passenger ventilation - Sliding luggage doors - Vestigial buffers - All wheel pick up - Engineered for passenger inclusion - Suitable for Radius 2 curves - O Gauge (1:43 Scale)

Dapol Kitmaster Windmill Kit

Windmill Kit The kit can be designed to be operational and would require a suitable electric motor to turn the sails (Faller) Also ideal for any Thomas the Tank Engine enthusiasts - Plastic kit requires glue and paint to complete and enhance detail (NOT included) - OO Scale

Dapol Kitmaster Telegraph Poles Kit

Telegraph Poles Kit - Plastic kit requires glue and paint to complete and enhance detail (NOT included) - OO Scale

Dapol Kitmaster Thatched Cottage Kit

Thatched Cottage Kit - Plastic kit requires glue and paint to complete and enhance detail (NOT included) - OO Scale

Dapol Kitmaster Turntable Kit

Turntable Kit - Makes typical steam era turntable (GWR Design) - Designed to build on flat baseboard and build the tracks up to the Turntable deck height - Manual turning as built or can be motorised using "Meccano" Gears and a handle or suitable electric motor kit (Peco/ Expo tools) - Plastic kit requires glue and paint to complete and enhance detail (NOT included) - OO Scale

Dapol Kitmaster Twin Silo Wagon Kit

Twin Silo Wagon Kit - Plastic Kit requires glue and paint to complete (NOT included) - OO Scale

Dapol Kitmaster Station Accessories Kit

Station Accessories Kit Includes - Passengers/station staff - luggage and trolleys - Plastic kit requires glue and paint to complete and enhance detail (NOT included) - OO Scale

Dapol Kitmaster Station Platform Kit

Station Platform Kit - Plastic kit requires glue and paint to complete and enhance detail (NOT included) - OO Scale

Dapol Kitmaster Stephensons Rocket Static Locomotive Kit

Stephenson's Rocket Static Locomotive Kit - Plastic kit requires glue and paint to complete and enhance detail (NOT included) - OO Scale

Dapol Kitmaster Signal Box Kit

Signal Box Kit This famous kit is based on the Signal Box at Oakham on the Peterborough-Stamford Line in Rutland, which is preserved today as a Grade 1 listed building. The design also makes up a typical "Midland" type signal box. - Plastic kit requires glue and paint to complete and enhance detail (NOT included) - OO Scale

Dapol Kitmaster Signal Gantry Kit

Signal Gantry Kit - Plastic kit requires glue and paint to complete and enhance detail (NOT included) - OO Scale

Dapol Kitmaster Railway Workmen Kit

Railway Workmen Kit - Plastic kit requires glue and paint to complete and enhance detail (NOT included) - OO Scale

Dapol Kitmaster Shop & Flat Kit

Shop & Flat Kit - Plastic kit requires glue and paint to complete and enhance detail (NOT included) - OO Scale

Dapol Kitmaster Platform Fittings Kit

Platform Fittings Kit - Plastic kit requires glue and paint to complete and enhance detail (NOT included) - OO Scale

Dapol Kitmaster Pub Sign & Horse Trough Kit

Pub Sign & Horse Trough Kit - Plastic kit requires glue and paint to complete and enhance detail (NOT included) - OO Scale

Dapol Kitmaster General Stores Kit

General Stores Kit - Plastic kit requires glue and paint to complete and enhance detail (NOT included) - OO Scale

Dapol Kitmaster Girder Bridge Kit

Girder Bridge Kit - Plastic kit requires glue and paint to complete and enhance detail (NOT included) - OO Scale

Dapol Kitmaster Detached Bungalow Kit

Detached Bungalow Kit - Plastic kit requires glue and paint to complete and enhance detail (NOT included) - OO Scale

Dapol Kitmaster 20t BP Tank Wagon Kit

20t BP Tank Wagon Kit - Plastic kit requires glue and paint to complete and enhance detail (NOT included) - OO Scale

Dapol Kitmaster Booking Hall Kit

Booking Hall Kit - Plastic kit requires glue and paint to complete and enhance detail (NOT included) - OO Scale

Dapol Imperium 21 Pin 8 Function Decoder

Dapol - Imperium 21 Pin 8 Function Decoder

Dapol Imperium 21 Pin MTC 6 Function Decoder

Dapol - Imperium 21 Pin MTC 6 Function Decoder