Graham Farish HYA Bogie Hopper Wagon GBRf Silver 'Coal' 371030 (N)

HYA Bogie Hopper Wagon GBRf Silver 'Coal' 371030 The HYA Bogie Hopper Wagons were introduced from 2007 to transport coal to the UK’s coal-fired powers station. In later years, as the country transitioned away from burning coal the wagons were made redundant and found a new use moving biomass for which they were recoded IIA. The imposing wagons are reproduced faithfully in N scale using an injection moulded bodyshell, complete with interior partitions within the hopper, and hopper doors suspended from the underframe. Further details are added in the form of handwheels, lamp irons, buffers and separate pipe runs, and metal weights are fitted above each bogie for smooth and assured running. Those bogies are finely-moulded replicas of the prototype, fitted with metal wheelsets and with standard N scale couplings fitted into the NEM coupling pockets. The real wagons had a bare metal finish which is replicated on the Graham Farish model along with GBRf branding and the word ‘coal’ at one end. The outline of the former FirstGroup logos can also be seen, harking back to the time when the GBRf was owned by the group and operated as First GBRf. Details: Pristine GBRf ‘Coal’ Silver livery Running No. 371030 Features: Accessory Pack NEM Coupling Pockets Length 132mm (over couplings) - N Scale

Graham Farish HYA Bogie Hopper Wagon GBRf Silver 'Coal' 371068 (N)

HYA Bogie Hopper Wagon GBRf Silver 'Coal' 371068 The HYA Bogie Hopper Wagons were introduced from 2007 to transport coal to the UK’s coal-fired powers station. In later years, as the country transitioned away from burning coal the wagons were made redundant and found a new use moving biomass for which they were recoded IIA. The imposing wagons are reproduced faithfully in N scale using an injection moulded bodyshell, complete with interior partitions within the hopper, and hopper doors suspended from the underframe. Further details are added in the form of handwheels, lamp irons, buffers and separate pipe runs, and metal weights are fitted above each bogie for smooth and assured running. Those bogies are finely-moulded replicas of the prototype, fitted with metal wheelsets and with standard N scale couplings fitted into the NEM coupling pockets. The real wagons had a bare metal finish which is replicated on the Graham Farish model along with GBRf branding and the word ‘coal’ at one end. The outline of the former FirstGroup logos can also be seen, harking back to the time when the GBRf was owned by the group and operated as First GBRf. Details: Pristine GBRf ‘Coal’ Silver livery Running No. 371068 Features: Accessory Pack NEM Coupling Pockets Length 132mm (over couplings) - N Scale

Graham Farish IIA Bogie Hopper Wagon GBRf (VTG) Silver 37706955220-8 (N)

IIA Bogie Hopper Wagon GBRf (VTG) Silver 37706955220-8 The IIA Bogie Hopper Wagons started life as HYA Coal Hoppers, introduced from 2007 to deliver the fuel needed to run coal-fired power stations. However, as the UK transitioned away from using coal as the fuel for its power stations, the wagons became redundant and were re-employed on biomass trains, being recoded as IIAs in the process. The imposing wagons are reproduced faithfully in N scale using an injection moulded bodyshell, complete with interior partitions within the hopper, and hopper doors suspended from the underframe. Further details are added in the form of handwheels, lamp irons, buffers and separate pipe runs, and metal weights are fitted above each bogie for smooth and assured running. Those bogies are finely-moulded replicas of the prototype, fitted with metal wheelsets and with standard N scale couplings fitted into the NEM coupling pockets. Owned by VTG Rail but operated by GBRf, the real wagons had a bare metal finish which is replicated on the Graham Farish model along with GBRf and VTG branding. The outline of the former FirstGroup logos can also be seen, harking back to the time when the GBRf was owned by the group and operated as First GBRf. Details: Pristine GBRf (VTG) Silver livery Running No. 37706955220-8 Features: Accessory Pack NEM Coupling Pockets Length 132mm (over couplings) - N Scale  

Graham Farish BR Mk1 POS Royal Mail Travelling Post Office Red 80318 (N)

BR Mk1 POS Royal Mail Travelling Post Office Red 80318 This Graham Farish model of a POS coach carries all the hallmarks of this iconic design, the distinctive profile of the Mk1 coach is captured to a tee from the bodysides to the roof where finely moulded ventilators can be found. On the bodysides the handles and grab handles surrounding each door are moulded precisely, whilst the handrails aside each loading door are separate metal wire fittings. At either end, the corridor gangway is complete with lamp irons on either side and within, the corridor doors are modelled with the two small windows that is flush glazed – in the same way all of the windows on the model are. Metal grab handles are added to each end individually and metal toilet filler pipes extend to the roof. Footboards are included on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders and other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, operating in tandem with the bogie. The icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Details: Pristine Royal Mail Travelling Post Office Red livery Running No. 80318 B4 Bogies Scallop Roof Ventilators Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 136mm (over couplings) - N Scale

Graham Farish 8 Plank Wagon End Door 'Modern Transport Liverpool' Grey 1206(N)

8 Plank Wagon End Door 'Modern Transport Liverpool' Grey 1206 Britain’s Railways were developed primarily to move freight and by the early twentieth century, hundreds of independent companies were operating their own wagons to transport their goods around the UK by rail. Fleet sizes ranged from small concerns with a single wagon to large enterprises whose wagon count could run into the hundreds. The majority of wagons in private ownership were wooden bodied open wagons and by far the most common commodity that they carried was coal, although other materials, including coke, minerals and aggregates might also be transported depending on the nature of business conducted by the wagon’s owner. Various types of 8 Plank Wagon were built, and this Graham Farish model depicts one with fixed ends, unloading would therefore be via the side doors and bottom discharge doors, which on the model are neatly engraved into the wagon’s bodyshell which is moulded with crisp plank lines and ironwork detailing. Below the solebar the W irons, axleboxes and springs are all reproduced to great effect, with separate brakes and brake leavers and metal door stops completing the look. The model runs on spoked wheels which are of metal construction whilst metal buffers adorn the bufferbeams. Authentic colours and typefaces are employed during the livery application prototype, completing this high-fidelity model. Details: Pristine ‘Modern Transport Liverpool’ Grey livery Running No. 1206 Features: Length 49mm (over couplings) - N Scale

Graham Farish GWR 49XX 'Hall' 4936 'Kinlet Hall' BR Lined Green (Late) (N)

GWR 49XX 'Hall' 4936 'Kinlet Hall' BR Lined Green (Late) The Great Western Railway (GWR) was famous for its variety of 4-6-0 steam locomotive classes, and none were more numerous and successful than the 49XX ‘Hall’ Class. After a long period of absence from the Graham Farish range, the ‘Hall’ makes a triumphant return for 2025 with this brand new model that has been designed from the rails up to produce a masterpiece in miniature befitting of such an iconic prototype. These mixed traffic machines were found across the Great Western network and beyond. Constructed from a multitude of high-fidelity parts and decorated with an exquisite paint finish, the new Graham Farish ‘Hall’ has an impressive technical specification to match. Employing a powerful coreless motor to drive the wheels through a diecast metal gearbox, electrical pickup comes from all driving and tender wheels and separate metal bearings are fitted to the driving wheel axles assuring smooth and reliable running. The tender houses a speaker and Next18 DCC decoder socket, making it easy to add sound Details: Locomotive is Preserved Pristine BR Lined Green (Late Crest) Livery Running No. 4936 Named ‘Kinlet Hall’ Collett 4,000-gallon Tender BR Smokebox Door with Numberplate and Shedplate Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Speaker installed in the tender of all models for optimum sound reproduction Length 141mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater - N Scale

Graham Farish GWR 49XX 'Hall' 4936 'Kinlet Hall' BR Lined Green (Late) (SF)(N)

GWR 49XX 'Hall' 4936 'Kinlet Hall' BR Lined Green (Late) (Sound Fitted) The Great Western Railway (GWR) was famous for its variety of 4-6-0 steam locomotive classes, and none were more numerous and successful than the 49XX ‘Hall’ Class. After a long period of absence from the Graham Farish range, the ‘Hall’ makes a triumphant return for 2025 with this brand new model that has been designed from the rails up to produce a masterpiece in miniature befitting of such an iconic prototype. These mixed traffic machines were found across the Great Western network and beyond. Constructed from a multitude of high-fidelity parts and decorated with an exquisite paint finish, the new Graham Farish ‘Hall’ has an impressive technical specification to match. Employing a powerful coreless motor to drive the wheels through a diecast metal gearbox, electrical pickup comes from all driving and tender wheels and separate metal bearings are fitted to the driving wheel axles assuring smooth and reliable running. The tender houses a speaker and Next18 DCC decoder socket, making it easy to add sound Details: Locomotive is Preserved Pristine BR Lined Green (Late Crest) Livery Running No. 4936 Named ‘Kinlet Hall’ Collett 4,000-gallon Tender BR Smokebox Door with Numberplate and Shedplate Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Speaker installed in the tender of all models for optimum sound reproduction Length 141mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater - N Scale

Graham Farish GWR 49XX 'Hall' 4962 'Ragley Hall' BR Lined Green (Early) (N)

GWR 49XX 'Hall' 4962 'Ragley Hall' BR Lined Green (Early) The Great Western Railway (GWR) was famous for its variety of 4-6-0 steam locomotive classes, and none were more numerous and successful than the 49XX ‘Hall’ Class. After a long period of absence from the Graham Farish range, the ‘Hall’ makes a triumphant return for 2025 with this brand new model that has been designed from the rails up to produce a masterpiece in miniature befitting of such an iconic prototype. These mixed traffic machines were found across the Great Western network and beyond. Constructed from a multitude of high-fidelity parts and decorated with an exquisite paint finish, the new Graham Farish ‘Hall’ has an impressive technical specification to match. Employing a powerful coreless motor to drive the wheels through a diecast metal gearbox, electrical pickup comes from all driving and tender wheels and separate metal bearings are fitted to the driving wheel axles assuring smooth and reliable running. The tender houses a speaker and Next18 DCC decoder socket, making it easy to add sound Details: Pristine BR Lined Green (Early Emblem) Livery Running No. 4962 Named ‘Ragley Hall’ Collett 4,000-gallon Tender BR Smokebox Door with Numberplate and Shedplate Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Speaker installed in the tender of all models for optimum sound reproduction Length 141mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater - N Scale

Graham Farish GWR 'Modified Hall' 6960 'Raveningham Hall' GWR L/Green (SF) (N)

GWR 'Modified Hall' 6960 'Raveningham Hall' GWR Lined Green (Sound Fitted) The Great Western Railway (GWR) was famous for its variety of 4-6-0 steam locomotive classes, and none were more numerous and successful than the 49XX ‘Hall’ Class. The type was later developed to create the 6959 ‘Modified Hall’ Class which continued the successes of the ‘Halls’, operating from the final years of the GWR and throughout the British Railways period until steam ended on the Western Region in December 1965 yet N scale models of these iconic machines have never been produced, until now! Developed alongside the brand new ‘Halls’ for the Graham Farish range, these masterpieces in miniature have been created through extensive research and detailed surveys of the preserved locomotives, of which there are several. The mixed traffic machines were found across the GWR network and beyond. Constructed from a multitude of high-fidelity parts and decorated with an exquisite paint finish, the new Graham Farish ‘Modified Hall’ has an impressive technical specification to match. Employing a powerful coreless motor to drive the wheels through a diecast metal gearbox, electrical pickup comes from all driving and tender wheels and separate metal bearings are fitted to the driving wheel axles assuring smooth and reliable running. The tender houses a speaker and Next18 DCC decoder socket, making it easy to add sound Details: Locomotive is Preserved Pristine GWR Lined Green (Great (crest) Western) Livery Running No. 6960 Named ‘Raveningham Hall’ Collett 4,000-gallon Tender GWR Smokebox Door without Numberplate Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Speaker installed in the tender of all models for optimum sound reproduction Length 141mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater - N Scale

Graham Farish GWR 'Modified Hall' 6960 'Raveningham Hall' GWR Lined Green (N)

GWR 'Modified Hall' 6960 'Raveningham Hall' GWR Lined Green The Great Western Railway (GWR) was famous for its variety of 4-6-0 steam locomotive classes, and none were more numerous and successful than the 49XX ‘Hall’ Class. The type was later developed to create the 6959 ‘Modified Hall’ Class which continued the successes of the ‘Halls’, operating from the final years of the GWR and throughout the British Railways period until steam ended on the Western Region in December 1965 yet N scale models of these iconic machines have never been produced, until now! Developed alongside the brand new ‘Halls’ for the Graham Farish range, these masterpieces in miniature have been created through extensive research and detailed surveys of the preserved locomotives, of which there are several. The mixed traffic machines were found across the GWR network and beyond. Constructed from a multitude of high-fidelity parts and decorated with an exquisite paint finish, the new Graham Farish ‘Modified Hall’ has an impressive technical specification to match. Employing a powerful coreless motor to drive the wheels through a diecast metal gearbox, electrical pickup comes from all driving and tender wheels and separate metal bearings are fitted to the driving wheel axles assuring smooth and reliable running. The tender houses a speaker and Next18 DCC decoder socket, making it easy to add sound Details: Locomotive is Preserved Pristine GWR Lined Green (Great (crest) Western) Livery Running No. 6960 Named ‘Raveningham Hall’ Collett 4,000-gallon Tender GWR Smokebox Door without Numberplate Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Speaker installed in the tender of all models for optimum sound reproduction Length 141mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater - N Scale

Graham Farish GWR 'Modified Hall' 7904 'Fountains Hall' BR Lined Black (N)

GWR 'Modified Hall' 7904 'Fountains Hall' BR Lined Black The Great Western Railway (GWR) was famous for its variety of 4-6-0 steam locomotive classes, and none were more numerous and successful than the 49XX ‘Hall’ Class. The type was later developed to create the 6959 ‘Modified Hall’ Class which continued the successes of the ‘Halls’, operating from the final years of the GWR and throughout the British Railways period until steam ended on the Western Region in December 1965 yet N scale models of these iconic machines have never been produced, until now! Developed alongside the brand new ‘Halls’ for the Graham Farish range, these masterpieces in miniature have been created through extensive research and detailed surveys of the preserved locomotives, of which there are several. The mixed traffic machines were found across the GWR network and beyond. Constructed from a multitude of high-fidelity parts and decorated with an exquisite paint finish, the new Graham Farish ‘Modified Hall’ has an impressive technical specification to match. Employing a powerful coreless motor to drive the wheels through a diecast metal gearbox, electrical pickup comes from all driving and tender wheels and separate metal bearings are fitted to the driving wheel axles assuring smooth and reliable running. The tender houses a speaker and Next18 DCC decoder socket, making it easy to add sound Details: Pristine BR Lined Black (Early Emblem) Livery Running No. 7904 Named ‘Fountains Hall’ Collett 4,000-gallon Tender BR Smokebox Door with Numberplate and Shedplate Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Speaker installed in the tender of all models for optimum sound reproduction Length 141mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater - N Scale

Graham Farish GWR 'Modified Hall' 7904 'Fountains Hall' BR Lined Black (SF)(N)

GWR 'Modified Hall' 7904 'Fountains Hall' BR Lined Black (Sound Fitted) The Great Western Railway (GWR) was famous for its variety of 4-6-0 steam locomotive classes, and none were more numerous and successful than the 49XX ‘Hall’ Class. The type was later developed to create the 6959 ‘Modified Hall’ Class which continued the successes of the ‘Halls’, operating from the final years of the GWR and throughout the British Railways period until steam ended on the Western Region in December 1965 yet N scale models of these iconic machines have never been produced, until now! Developed alongside the brand new ‘Halls’ for the Graham Farish range, these masterpieces in miniature have been created through extensive research and detailed surveys of the preserved locomotives, of which there are several. The mixed traffic machines were found across the GWR network and beyond. Constructed from a multitude of high-fidelity parts and decorated with an exquisite paint finish, the new Graham Farish ‘Modified Hall’ has an impressive technical specification to match. Employing a powerful coreless motor to drive the wheels through a diecast metal gearbox, electrical pickup comes from all driving and tender wheels and separate metal bearings are fitted to the driving wheel axles assuring smooth and reliable running. The tender houses a speaker and Next18 DCC decoder socket Details: Pristine BR Lined Black (Early Emblem) Livery Running No. 7904 Named ‘Fountains Hall’ Collett 4,000-gallon Tender BR Smokebox Door with Numberplate and Shedplate Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Speaker installed in the tender of all models for optimum sound reproduction Length 141mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater - N Scale

Graham Farish 5 Plank China Clay Wagon GWR Grey '94054' (N)

5 Plank China Clay Wagon GWR Grey '94054' China Clay Wagons were synonymous with Cornwall where the largest deposit of Kaolin, known more commonly as china clay, had first been discovered in 1746 by William Cookworthy. The resulting industry made Cornwall the pre-eminent global source of china clay and as railways were established, they were used to transport the material both locally and further afield, to destinations where the material was required, like the Staffordshire potteries. The GWR, and subsequently BR, built open wagons like the one depicted by this Graham Farish model specifically for china clay traffic. With a 9ft wheelbase and 12T capacity, the wooden planked body sat on top of a metal underframe and our model reflects this, with fine detailing engraved and moulded onto the body. The chassis meanwhile incorporates brake gear and sports tie-bars between the axleboxes, along with metal door bangers and turned metal buffers. Spoked metal wheels and NEM coupling pockets complete the model, which is finished in a beautiful and authentic rendition of the GWR Grey livery. Features: Pristine GWR ‘GW’ Grey livery Running No. 94054 Accessory Pack NEM Coupling Pockets Length 46mm (over couplings) - Era 3 - N Scale

Graham Farish 5 Plank China Clay Triple Pack BR Bauxite (Early) w/ Canopy (N)

5 Plank China Clay Triple Pack BR Bauxite (Early) with Flat Canopy China Clay Wagons were synonymous with Cornwall where the largest deposit of Kaolin, known more commonly as china clay, had first been discovered in 1746 by William Cookworthy. The resulting industry made Cornwall the pre-eminent global source of china clay and as railways were established, they were used to transport the material both locally and further afield, to destinations where the material was required, like the Staffordshire potteries. The GWR, and subsequently BR, built open wagons like the one depicted by this Graham Farish model specifically for china clay traffic. With a 9ft wheelbase and 12T capacity, the wooden planked body sat on top of a metal underframe and our model reflects this, with fine detailing engraved and moulded onto the body. The chassis meanwhile incorporates brake gear and sports tie-bars between the axleboxes, along with metal door bangers and turned metal buffers. This triple-pack of wagons is finished in BR Bauxite livery, and each model comes complete with spoked metal wheels and NEM coupling pockets. The three models are also supplied with tarpaulin covers, as used on the real wagons to protect the valuable china clay cargo from the elements. Features: Pristine BR Bauxite (Early) livery Running Nos. B743073, B743077 & B743081 Accessory Pack NEM Coupling Pockets Length 3 x 46mm (over couplings) - Era 5 - N Scale

Graham Farish 3 Plank Wagon 'London Transport' Grey 'B.W.260' (N)

3 Plank Wagon 'London Transport' Grey 'B.W.260' Britain’s railways were developed primarily to move freight and over time, a wide range of wagons were developed to suit the varied cargo that the railway companies had been contracted to transport. Among them were short wheelbase, 3 plank open wagons which had hinged sides allowing them to be lowered, aiding the loading and unloading of cargo. The goods carried by such wagons was varied and could range from loose loads like minerals and aggregate to crates, barrels and even single pieces of machinery or equipment. Basically, anything that could tolerate being exposed to the elements could be carried, although loads could also be sheeted if necessary to offer some protection from weather and general railway dirt. The 3 Plank Wagon depicted by this Graham Farish model is created using an injection moulded wagon body, incorporating hinges along each edge and with securing chains represented at each corner. The wooden deck of the wagon is depicted with crisp engraving to define the separate wooden planks, and this level of detail extends to the wagon’s planked sides, both on the inner and outer faces. Below the solebar the W irons, axleboxes and springs are all reproduced to great effect, complete with separate brakes and brake levers. The model runs on spoked wheels which are of metal construction whilst metal buffers adorn the bufferbeams. Authentic colours and typefaces are employed during the livery application process, completing this high-fidelity model. Features: Pristine London Transport Grey livery Running No. B.W.260 NEM Coupling Pockets Length 50mm (over couplings) - Era 5 - N Scale

Graham Farish 3 Plank Wagon 'Mountsorrel Granite' Grey '127' (N)

3 Plank Wagon 'Mountsorrel Granite' Grey '127' Britain’s railways were developed primarily to move freight and over time, a wide range of wagons were developed to suit the varied cargo that the railway companies had been contracted to transport. Among them were short wheelbase, 3 plank open wagons which had hinged sides allowing them to be lowered, aiding the loading and unloading of cargo. The goods carried by such wagons was varied and could range from loose loads like minerals and aggregate to crates, barrels and even single pieces of machinery or equipment. Basically, anything that could tolerate being exposed to the elements could be carried, although loads could also be sheeted if necessary to offer some protection from weather and general railway dirt. The 3 Plank Wagon depicted by this Graham Farish model is created using an injection moulded wagon body, incorporating hinges along each edge and with securing chains represented at each corner. The wooden deck of the wagon is depicted with crisp engraving to define the separate wooden planks, and this level of detail extends to the wagon’s planked sides, both on the inner and outer faces. Below the solebar the W irons, axleboxes and springs are all reproduced to great effect, complete with separate brakes and brake levers. The model runs on spoked wheels which are of metal construction whilst metal buffers adorn the bufferbeams. Authentic colours and typefaces are employed during the livery application process, completing this high-fidelity model. Features: Wagon is Preserved Pristine Mountsorrel Granite Grey livery Running No. 127 NEM Coupling Pockets Length 50mm (over couplings) - Era 3 - N Scale

Graham Farish GWR 4073 'Castle' 5015 'Kingswear Castle' BR Green Early (SF)(N)

GWR 4073 'Castle' 5015 'Kingswear Castle' BR Lined Green Early Emblem (Sound Fitted) The model that started a revolution as the first British N Scale steam locomotive to be made with SOUND FITTED, the Graham Farish ‘Castle’ has a technical specification as impressive as its good looks, with a powerful coreless motor driving the wheels through a diecast metal gearbox, all wheel pickup from the driving and tender wheels and separate metal bearings fitted to the driving wheel axles, smooth and reliable running is guaranteed. The tender houses a speaker and Next18 DCC decoder socket, making it easy to add sound, or opt for a SOUND FITTED version and the work is done for you, so you can enjoy realistic sound effects straight from the box on both Analogue and DCC. Details on this model: Pristine BR Lined Green (Early Emblem) Livery Running No. 5015 Named ‘Kingswear Castle’ Collett 4,000-gallon Tender Single Chimney Inside Cylinder Chest: Box Pattern with Straight Front Curved Cylinder Steam Pipes Tapered Buffers Horizontal Cab Side Handrail Rear Sandboxes Behind Cab Steps Short Nameplates Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 145mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater High-precision, injection-moulded bodyshell, running plate and tender with separately fitted details parts including smokebox door, lower front lamp irons, steam pipes, whistle and reverser Separately applied metal components including handrails, buffers and sand pipes Dome, filler cap, water scoop and vacuum pipe added to the tender as separate parts Tender fitted with metal coal-effect load Detailed cab interior including boiler backhead controls and gauges, brake standard and water scoop standard Hinged and posable metal fall plate between the locomotive and tender Each model supplied with a full set of accessory parts including dummy screwlink couplings and front vacuum pipe Speaker installed in the tender of all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions - N Scale

Graham Farish GWR 4073 'Castle' 5055 'Earl of Eldon' GWR Lined Green (N)

GWR 4073 'Castle' 5055 'Earl of Eldon' GWR Lined Green (GW Crest) The model that started a revolution as the first British N Scale steam locomotive to be made with SOUND FITTED, the Graham Farish ‘Castle’ has a technical specification as impressive as its good looks, with a powerful coreless motor driving the wheels through a diecast metal gearbox, all wheel pickup from the driving and tender wheels and separate metal bearings fitted to the driving wheel axles, smooth and reliable running is guaranteed. The tender houses a speaker and Next18 DCC decoder socket, making it easy to add sound, or opt for a SOUND FITTED version and the work is done for you, so you can enjoy realistic sound effects straight from the box on both Analogue and DCC. Details on this model: Pristine GWR Lined Green (GW Crest) Livery Running No. 5055 Named ‘Earl of Eldon’ Collett 4,000-gallon Tender Single Chimney Inside Cylinder Chest: Box Pattern with Curved Front Straight Cylinder Steam Pipes Tapered Buffers Horizontal Cab Side Handrail Rear Sandboxes Behind Cab Steps Short Nameplates Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 145mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater High-precision, injection-moulded bodyshell, running plate and tender with separately fitted details parts including smokebox door, lower front lamp irons, steam pipes, whistle and reverser Separately applied metal components including handrails, buffers and sand pipes Dome, filler cap, water scoop and vacuum pipe added to the tender as separate parts Tender fitted with metal coal-effect load Detailed cab interior including boiler backhead controls and gauges, brake standard and water scoop standard Hinged and posable metal fall plate between the locomotive and tender Each model supplied with a full set of accessory parts including dummy screwlink couplings and front vacuum pipe Speaker installed in the tender of all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions - N Scale

Graham Farish GWR 4073 'Castle' 5055 'Earl of Eldon' GWR Lined Green (SF) (N)

GWR 4073 'Castle' 5055 'Earl of Eldon' GWR Lined Green (GW Crest) (Sound Fitted) The model that started a revolution as the first British N Scale steam locomotive to be made with SOUND FITTED, the Graham Farish ‘Castle’ has a technical specification as impressive as its good looks, with a powerful coreless motor driving the wheels through a diecast metal gearbox, all wheel pickup from the driving and tender wheels and separate metal bearings fitted to the driving wheel axles, smooth and reliable running is guaranteed. The tender houses a speaker and Next18 DCC decoder socket, making it easy to add sound, or opt for a SOUND FITTED version and the work is done for you, so you can enjoy realistic sound effects straight from the box on both Analogue and DCC. Details on this model: Pristine GWR Lined Green (GW Crest) Livery Running No. 5055 Named ‘Earl of Eldon’ Collett 4,000-gallon Tender Single Chimney Inside Cylinder Chest: Box Pattern with Curved Front Straight Cylinder Steam Pipes Tapered Buffers Horizontal Cab Side Handrail Rear Sandboxes Behind Cab Steps Short Nameplates Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 145mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater High-precision, injection-moulded bodyshell, running plate and tender with separately fitted details parts including smokebox door, lower front lamp irons, steam pipes, whistle and reverser Separately applied metal components including handrails, buffers and sand pipes Dome, filler cap, water scoop and vacuum pipe added to the tender as separate parts Tender fitted with metal coal-effect load Detailed cab interior including boiler backhead controls and gauges, brake standard and water scoop standard Hinged and posable metal fall plate between the locomotive and tender Each model supplied with a full set of accessory parts including dummy screwlink couplings and front vacuum pipe Speaker installed in the tender of all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions - N Scale

Graham Farish JGA Bogie Hopper Buxton Lime Industries 'BLI19215' (N)

JGA Bogie Hopper Buxton Lime Industries 'BLI19215' The JGA Bogie Hoppers were built in Slovakia in the mid-1990s for Buxton Lime Industries and Tilcon, primarily working from Tunstead Quarry, operated by Buxton Lime Industries, near Buxton on the edge of the Peak District. Consisting of a large hopper with three pairs of bottom discharge doors, the wagons were used to transport lime products from the quarry for distribution around the UK. Reproduced in N Scale by Graham Farish, the JGA model features a precision moulded bodyshell which captures the wagon’s distinctive sloping ends with their ribbed constructed. Below the solebar, the three sets of discharge doors are added separately, meanwhile a metal weight is concealed above each bogie to ensure smooth running. The bogies themselves are fitted with metal wheels and axles whilst the integrated NEM coupling pockets allow alternative couplings to be fitted with ease. The eye catching white and blue livery faithfully adorns the model, complete with the various markings and operating instructions that are found on the real wagons. Features: Pristine Buxton Lime Industries White & Blue livery Running No. BLI19215 NEM Coupling Pockets Length 105mm (over couplings) - Era 9 - N Scale

Graham Farish BR Mk1 NBA Brake Gangwayed High Security RES Royal Mail '94457'

BR Mk1 NBA Brake Gangwayed High Security Rail Exp. Sys. (Royal Mail) 94457  This Graham Farish model is the perfect addition to any Rail Express Systems fleet and employs a detailed bodyshell, with fine mouldings of the roller shutter doors, including the shutter vanes which are engraved individually, and the guard’s door with its adjacent handrails. At each end the corridor connector, handrails, ETH equipment and tail lights are each moulded crisply, whilst below the solebar the truss rod frames are modelled with great finesse, flanked by the battery boxes, dynamo and other auxiliary equipment. Blackened metal wheelsets are fitted to each bogie to ensure free-running, and not only does this model run well but it looks well too, with the vibrant RES livery reproduced using authentic colours, logos and fonts to add the finishing touches. MODEL FEATURES: Pristine Rail Express Systems (Royal Mail) livery Running No. 94457 BR1 Bogies Length 134mm (over couplings) - Era 8 - N Scale

Graham Farish BR Mk1 NBA Brake Gangwayed High Security RES '94465'

BR Mk1 NBA Brake Gangwayed High Security Rail Express Systems 94465 This Graham Farish model is the perfect addition to any Rail Express Systems fleet and employs a detailed bodyshell, with fine mouldings of the roller shutter doors, including the shutter vanes which are engraved individually, and the guard’s door with its adjacent handrails. At each end the corridor connector, handrails, ETH equipment and tail lights are each moulded crisply, whilst below the solebar the truss rod frames are modelled with great finesse, flanked by the battery boxes, dynamo and other auxiliary equipment. Blackened metal wheelsets are fitted to each bogie to ensure free-running, and not only does this model run well but it looks well too, with the vibrant RES livery reproduced using authentic colours, logos and fonts to add the finishing touches. MODEL FEATURES: Pristine Rail Express Systems livery Running No. 94465 BR1 Bogies Length 134mm (over couplings) - Era 8 - N Scale

Graham Farish LMS Stanier 50ft Full Brake BR Maroon 'M31248M'

LMS Stanier 50ft Full Brake BR Maroon 'M31248M' Features: Pristine BR Maroon livery Running No. M31248M Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 115mm (over couplings) The LMS built coaches to three distinct patterns, known commonly as Period 1, 2 and 3 coaches. The Period 3 coaches were the final development, and the first examples were built in 1933, a year after Sir William Stanier became Chief Mechanical Engineer of the LMS and so the Period 3 coaches are often referred to as ‘Stanier Coaches’. Whilst passenger vehicles were mostly 57ft in length, several specialist types including catering vehicles, Inspection Saloons and Full Brakes were built to a length of 50ft. The vehicles were constructed with wooden frames skinned in steel and with curved windows, providing a modern contrast to earlier types with their wooden bodies and squarer windows. The Full Brakes were used to carry luggage, parcels and other general merchandise and could be found marshalled as part of both passenger and parcel trains, and with their integral guard’s compartment the guard could often be found travelling here too. Many Full Brakes remained in traffic well into the British Railways era and after the demise of steam too, with some examples ending up in departmental or engineer’s use following their withdrawal from revenue earning service. The Graham Farish model captures the look of Stanier’s design to a tee, with a high fidelity bodyshell featuring expertly moulded handrails, door handles, hinges and even door stops, all replicated crisply on the bodysides. At either end, the LMS pattern gangways are added, whilst end steps are fitted alongside and a metal handrail is included adjacent to them and metal buffers are fitted below. Each window is flush glazed and inside, the guard’s compartment is modelled along with the hand brake wheel. Footboards are fitted along the solebar, below which vacuum brake equipment is present along with the battery boxes, dynamo and other auxiliary gear. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Like any Graham Farish model, this high level of detail is brought to life through the livery application, using authentic colours, logos and fonts making every model a masterpiece in miniature. - Era 5 - N Scale

Graham Farish BR MK2A FK First Coridor BR Scotrail (13424)

BR MK2A FK First Coridor BR Scotrail (13424) Features: Pristine BR Scotrail livery Running No. 13424 Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 145mm (over couplings) British Rail’s second generation of standard coach was designated the Mk2, following on from the highly successful Mk1 series. Unlike the Mk1s however, the Mk2s evolved through different build batches, and such were the changes that a letter suffix was attributed to identify each of the different variants. Fewer coach types were built, with construction concentrating on vehicles offering standard accommodation of both first- and second-class, plus coaches that made provision for the Guard and train crew. Specialist vehicles such as catering and sleeping cars were not included, instead BR Mk1 and earlier types continued to fulfil these requirements until Mk3s with similar facilities arrived in the late-1970s to replace them. Like the Mk1s, the Mk2s were of steel construction, but featured more of a monocoque design than the Mk1, which added to their safety and integrity in the event of a collision. The first Mk2s were built in 1964 and by 1967, the Mk2A had arrived. The Mk2 family evolved over the years until the final iteration, the Mk2F, entered traffic in 1973, with the last examples built in 1975 paving the way for the Mk3s. When it comes to the Graham Farish model, like its real-life counterpart the Mk2A shares many of the highlights and features of the acclaimed Graham Farish Mk1 Coaches. The distinctive Mk2 shape gives the bodyshell and roof an unmistakable appearance and this is captured to a tee, complete with ventilators moulded expertly onto the profiled roof. Each end features separately fitted metal handrails, along with the corridor gangway and the two-part corridor doors within. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush glazing includes the sliding ventilators – a telltale sign that this is an early series Mk2. Take a look below the solebar and you will find a full complement of underframe equipment – depicting the components of the braking, electrical and auxiliary systems. The B4 bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. - Era 8 - N Scale

Graham Farish BR MK2A TSO Tourist Second Open WCRC Maroon '5239'

BR MK2A TSO Tourist Second Open WCRC Maroon '5239' Features: Pristine West Coast Railway Company Maroon livery Running No. 5239 Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 145mm (over couplings) British Rail’s second generation of standard coach was designated the Mk2, following on from the highly successful Mk1 series. Unlike the Mk1s however, the Mk2s evolved through different build batches, and such were the changes that a letter suffix was attributed to identify each of the different variants. Fewer coach types were built, with construction concentrating on vehicles offering standard accommodation of both first- and second-class, plus coaches that made provision for the Guard and train crew. Specialist vehicles such as catering and sleeping cars were not included, instead BR Mk1 and earlier types continued to fulfil these requirements until Mk3s with similar facilities arrived in the late-1970s to replace them. Like the Mk1s, the Mk2s were of steel construction, but featured more of a monocoque design than the Mk1, which added to their safety and integrity in the event of a collision. The first Mk2s were built in 1964 and by 1967, the Mk2A had arrived. The Mk2 family evolved over the years until the final iteration, the Mk2F, entered traffic in 1973, with the last examples built in 1975 paving the way for the Mk3s. When it comes to the Graham Farish model, like its real-life counterpart the Mk2A shares many of the highlights and features of the acclaimed Graham Farish Mk1 Coaches. The distinctive Mk2 shape gives the bodyshell and roof an unmistakable appearance and this is captured to a tee, complete with ventilators moulded expertly onto the profiled roof. Each end features separately fitted metal handrails, along with the corridor gangway and the two-part corridor doors within. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush glazing includes the sliding ventilators – a telltale sign that this is an early series Mk2. Take a look below the solebar and you will find a full complement of underframe equipment – depicting the components of the braking, electrical and auxiliary systems. The B4 bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. - Era 9 - N Scale

Graham Farish GWR Hawksworth Full Brake BR Departmental Blue & Grey DW150354

GWR Hawksworth Full Brake BR Departmental Blue & Grey DW150354 These N scale models of the GWR Hawksworth Coaches are one of the many jewels in the Graham Farish Rolling Stock fleet. Essential for any Western Region modeller, every coach is a faithful replica of the prototype and there are four vehicle types to choose from, allowing authentic trains to be created with ease. These include the Brake Third Corridor, Third Corridor and Composite Corridor, along with the Full Brake vehicle, whilst the Auto-Trailers designed by Hawksworth are also available in model form from Graham Farish. Each model sports finely moulded details such as handrails, grab handles and roof vents, and separate metal pipework is added to represent toilet fillers (where applicable) whilst the gangway connections and suspension arms are fitted separately at each end. Below the solebar the vacuum and steam heat pipework is present, along with battery boxes, dynamo and brake equipment – all fitted around the truss rod frames. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of compartments and seating, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts making every model a masterpiece in miniature. Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 138mm - N Scale

Graham Farish GWR Hawksworth Full Brake BR Maroon W318W

GWR Hawksworth Full Brake BR Maroon W318W These N scale models of the GWR Hawksworth Coaches are one of the many jewels in the Graham Farish Rolling Stock fleet. Essential for any Western Region modeller, every coach is a faithful replica of the prototype and there are four vehicle types to choose from, allowing authentic trains to be created with ease. These include the Brake Third Corridor, Third Corridor and Composite Corridor, along with the Full Brake vehicle, whilst the Auto-Trailers designed by Hawksworth are also available in model form from Graham Farish. Each model sports finely moulded details such as handrails, grab handles and roof vents, and separate metal pipework is added to represent toilet fillers (where applicable) whilst the gangway connections and suspension arms are fitted separately at each end. Below the solebar the vacuum and steam heat pipework is present, along with battery boxes, dynamo and brake equipment – all fitted around the truss rod frames. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of compartments and seating, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts making every model a masterpiece in miniature. Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 138mm - N Scale

Graham Farish GWR Hawksworth Brake Second Corridor BR Maroon W1772W

GWR Hawksworth Brake Second Corridor BR Maroon W1772W These N scale models of the GWR Hawksworth Coaches are one of the many jewels in the Graham Farish Rolling Stock fleet. Essential for any Western Region modeller, every coach is a faithful replica of the prototype and there are four vehicle types to choose from, allowing authentic trains to be created with ease. These include the Brake Third Corridor, Third Corridor and Composite Corridor, along with the Full Brake vehicle, whilst the Auto-Trailers designed by Hawksworth are also available in model form from Graham Farish. Each model sports finely moulded details such as handrails, grab handles and roof vents, and separate metal pipework is added to represent toilet fillers (where applicable) whilst the gangway connections and suspension arms are fitted separately at each end. Below the solebar the vacuum and steam heat pipework is present, along with battery boxes, dynamo and brake equipment – all fitted around the truss rod frames. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of compartments and seating, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts making every model a masterpiece in miniature. Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 138mm - N Scale

Graham Farish GWR Hawksworth Composite Corridor BR Maroon W7818W

GWR Hawksworth Composite Corridor BR Maroon W7818W These N scale models of the GWR Hawksworth Coaches are one of the many jewels in the Graham Farish Rolling Stock fleet. Essential for any Western Region modeller, every coach is a faithful replica of the prototype and there are four vehicle types to choose from, allowing authentic trains to be created with ease. These include the Brake Third Corridor, Third Corridor and Composite Corridor, along with the Full Brake vehicle, whilst the Auto-Trailers designed by Hawksworth are also available in model form from Graham Farish. Each model sports finely moulded details such as handrails, grab handles and roof vents, and separate metal pipework is added to represent toilet fillers (where applicable) whilst the gangway connections and suspension arms are fitted separately at each end. Below the solebar the vacuum and steam heat pipework is present, along with battery boxes, dynamo and brake equipment – all fitted around the truss rod frames. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of compartments and seating, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts making every model a masterpiece in miniature. Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 138mm - N Scale

Graham Farish GWR Hawksworth Composite Corridor BR Maroon W7821W

GWR Hawksworth Composite Corridor BR Maroon W7821W These N scale models of the GWR Hawksworth Coaches are one of the many jewels in the Graham Farish Rolling Stock fleet. Essential for any Western Region modeller, every coach is a faithful replica of the prototype and there are four vehicle types to choose from, allowing authentic trains to be created with ease. These include the Brake Third Corridor, Third Corridor and Composite Corridor, along with the Full Brake vehicle, whilst the Auto-Trailers designed by Hawksworth are also available in model form from Graham Farish. Each model sports finely moulded details such as handrails, grab handles and roof vents, and separate metal pipework is added to represent toilet fillers (where applicable) whilst the gangway connections and suspension arms are fitted separately at each end. Below the solebar the vacuum and steam heat pipework is present, along with battery boxes, dynamo and brake equipment – all fitted around the truss rod frames. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of compartments and seating, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts making every model a masterpiece in miniature. Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 138mm - N Scale

Graham Farish GWR Hawksworth Composite Corridor GWR Chocolate & Cream 7254

GWR Hawksworth Composite Corridor GWR Chocolate & Cream 7254 These N scale models of the GWR Hawksworth Coaches are one of the many jewels in the Graham Farish Rolling Stock fleet. Essential for any Western Region modeller, every coach is a faithful replica of the prototype and there are four vehicle types to choose from, allowing authentic trains to be created with ease. These include the Brake Third Corridor, Third Corridor and Composite Corridor, along with the Full Brake vehicle, whilst the Auto-Trailers designed by Hawksworth are also available in model form from Graham Farish. Each model sports finely moulded details such as handrails, grab handles and roof vents, and separate metal pipework is added to represent toilet fillers (where applicable) whilst the gangway connections and suspension arms are fitted separately at each end. Below the solebar the vacuum and steam heat pipework is present, along with battery boxes, dynamo and brake equipment – all fitted around the truss rod frames. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of compartments and seating, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts making every model a masterpiece in miniature. Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 138mm - N Scale

Graham Farish GWR Hawksworth Full Brake BR Crimson & Cream W305

GWR Hawksworth Full Brake BR Crimson & Cream W305 These N scale models of the GWR Hawksworth Coaches are one of the many jewels in the Graham Farish Rolling Stock fleet. Essential for any Western Region modeller, every coach is a faithful replica of the prototype and there are four vehicle types to choose from, allowing authentic trains to be created with ease. These include the Brake Third Corridor, Third Corridor and Composite Corridor, along with the Full Brake vehicle, whilst the Auto-Trailers designed by Hawksworth are also available in model form from Graham Farish. Each model sports finely moulded details such as handrails, grab handles and roof vents, and separate metal pipework is added to represent toilet fillers (where applicable) whilst the gangway connections and suspension arms are fitted separately at each end. Below the solebar the vacuum and steam heat pipework is present, along with battery boxes, dynamo and brake equipment – all fitted around the truss rod frames. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of compartments and seating, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts making every model a masterpiece in miniature. Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 138mm - N Scale

Graham Farish LNER V2 4791 LNER Lined Green (Original) DCC Sound Fitted

LNER V2 4791 LNER Lined Green (Original) 4791 DCC Sound Fitted Some twenty years since the V2 was first produced in N scale by Graham Farish, this all-new model of the LNER Mixed Traffic icon is made to standards not even dreamt of twenty years ago. Often described as ‘the engines that won the war’, these new Graham Farish models are sure to win the heart of any discerning N scale enthusiast. Depicting one of the LNER’s most successful steam locomotive designs, this masterpiece in miniature captures the look and the character of the prototype to a tee. With highly detailed mouldings and many separate parts used on both the locomotive and tender, including era- and prototype-specific detailing to allow accurate models of any given class member throughout their working lives, the performance of these new V2s is just as impressive as their appearance. A powerful coreless motor and flywheel is incorporated into the diecast locomotive chassis, powering the driving wheels which run in separate metal bearings. With electrical pickup from the driving wheels and tender wheels and the option to have traction tyres fitted to one driving wheelset, this new V2 is on a steady footing as soon as it hits the rails. With a Next18 DCC decoder socket and pre-fitted speaker located in the tender, this model is future proofed for those wishing to operate on DCC, with or without sound. What’s more, a SOUND FITTED version is also available providing realistic sound effects on both analogue and DCC straight out of the box! Detail Variations Specific To This Model: Pristine LNER Lined Green (Original) livery Running No. 4791 Original ‘Monobloc’ Cylinder Casting with Inside Steam Pipes LNER Smokebox Door without Numberplate and with Lower Top Lamp Bracket Later Style Rocker Arm Guides Group Standard Tender with High-Front/Low-Rear Coal Space Dividers Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 141mm Coreless motor with flywheel Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Sprung front pony truck Cartazzi truck with flanged wheelset (with side swing for operational necessity) Optional traction tyres fitted to the rear driving wheels (replacement wheelset without traction tyres supplied in the accessory pack) Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front pony truck Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater Speaker installed in the tender of all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LNER V2 Class using recordings from real locomotives - N Scale

Graham Farish LNER V2 60845 BR Lined Black (Early Emblem) (N)

LNER V2 60845 BR Lined Black (Early Emblem) Some twenty years since the V2 was first produced in N scale by Graham Farish, this all-new model of the LNER Mixed Traffic icon is made to standards not even dreamt of twenty years ago. Often described as ‘the engines that won the war’, these new Graham Farish models are sure to win the heart of any discerning N scale enthusiast. Depicting one of the LNER’s most successful steam locomotive designs, this masterpiece in miniature captures the look and the character of the prototype to a tee. With highly detailed mouldings and many separate parts used on both the locomotive and tender, including era- and prototype-specific detailing to allow accurate models of any given class member throughout their working lives, the performance of these new V2s is just as impressive as their appearance. A powerful coreless motor and flywheel is incorporated into the diecast locomotive chassis, powering the driving wheels which run in separate metal bearings. With electrical pickup from the driving wheels and tender wheels and the option to have traction tyres fitted to one driving wheelset, this new V2 is on a steady footing as soon as it hits the rails. With a Next18 DCC decoder socket and pre-fitted speaker located in the tender, this model is future proofed for those wishing to operate on DCC, with or without sound. What’s more, a SOUND FITTED version is also available providing realistic sound effects on both analogue and DCC straight out of the box! Detail Variations Specific To This Model: Pristine BR Lined Black Early Emblem livery Running No. 60845 Original ‘Monobloc’ Cylinder Casting with Inside Steam Pipes BR Smokebox Door with Numberplate and with Higher Top Lamp Bracket Later Style Rocker Arm Guides Group Standard Tender with High-Front/Low-Rear Coal Space Dividers Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 141mm Coreless motor with flywheel Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Sprung front pony truck Cartazzi truck with flanged wheelset (with side swing for operational necessity) Optional traction tyres fitted to the rear driving wheels (replacement wheelset without traction tyres supplied in the accessory pack) Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front pony truck Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater Speaker installed in the tender of all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LNER V2 Class using recordings from real locomotives - N Scale

Graham Farish LNER V2 60845 BR Lined Black (Early Emblem) DCC S/F

LNER V2 60845 BR Lined Black (Early Emblem) 60845 DCC Sound Fitted Some twenty years since the V2 was first produced in N scale by Graham Farish, this all-new model of the LNER Mixed Traffic icon is made to standards not even dreamt of twenty years ago. Often described as ‘the engines that won the war’, these new Graham Farish models are sure to win the heart of any discerning N scale enthusiast. Depicting one of the LNER’s most successful steam locomotive designs, this masterpiece in miniature captures the look and the character of the prototype to a tee. With highly detailed mouldings and many separate parts used on both the locomotive and tender, including era- and prototype-specific detailing to allow accurate models of any given class member throughout their working lives, the performance of these new V2s is just as impressive as their appearance. A powerful coreless motor and flywheel is incorporated into the diecast locomotive chassis, powering the driving wheels which run in separate metal bearings. With electrical pickup from the driving wheels and tender wheels and the option to have traction tyres fitted to one driving wheelset, this new V2 is on a steady footing as soon as it hits the rails. With a Next18 DCC decoder socket and pre-fitted speaker located in the tender, this model is future proofed for those wishing to operate on DCC, with or without sound. What’s more, a SOUND FITTED version is also available providing realistic sound effects on both analogue and DCC straight out of the box! Detail Variations Specific To This Model: Pristine BR Lined Black Early Emblem livery Running No. 60845 Original ‘Monobloc’ Cylinder Casting with Inside Steam Pipes BR Smokebox Door with Numberplate and with Higher Top Lamp Bracket Later Style Rocker Arm Guides Group Standard Tender with High-Front/Low-Rear Coal Space Dividers Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 141mm Coreless motor with flywheel Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Sprung front pony truck Cartazzi truck with flanged wheelset (with side swing for operational necessity) Optional traction tyres fitted to the rear driving wheels (replacement wheelset without traction tyres supplied in the accessory pack) Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front pony truck Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater Speaker installed in the tender of all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LNER V2 Class using recordings from real locomotives - N Scale

Graham Farish LNER V2 60847 St Peter's School BR Lined Green (Late Crest)

LNER V2 60847 'St Peter's School' BR Lined Green (Late Crest) 60847 Some twenty years since the V2 was first produced in N scale by Graham Farish, this all-new model of the LNER Mixed Traffic icon is made to standards not even dreamt of twenty years ago. Often described as ‘the engines that won the war’, these new Graham Farish models are sure to win the heart of any discerning N scale enthusiast. Depicting one of the LNER’s most successful steam locomotive designs, this masterpiece in miniature captures the look and the character of the prototype to a tee. With highly detailed mouldings and many separate parts used on both the locomotive and tender, including era- and prototype-specific detailing to allow accurate models of any given class member throughout their working lives, the performance of these new V2s is just as impressive as their appearance. A powerful coreless motor and flywheel is incorporated into the diecast locomotive chassis, powering the driving wheels which run in separate metal bearings. With electrical pickup from the driving wheels and tender wheels and the option to have traction tyres fitted to one driving wheelset, this new V2 is on a steady footing as soon as it hits the rails. With a Next18 DCC decoder socket and pre-fitted speaker located in the tender, this model is future proofed for those wishing to operate on DCC, with or without sound. What’s more, a SOUND FITTED version is also available providing realistic sound effects on both analogue and DCC straight out of the box! Detail Variations Specific To This Model: Pristine BR Lined Green Late Crest livery Running No. 60847 Named ‘St Peter’s School’ Separate Cylinders with Outside Steam Pipes BR Smokebox Door with Numberplate and with Higher Top Lamp Bracket Later Style Rocker Arm Guides Group Standard Tender with High-Front/High-Rear Coal Space Dividers Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 141mm Coreless motor with flywheel Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Sprung front pony truck Cartazzi truck with flanged wheelset (with side swing for operational necessity) Optional traction tyres fitted to the rear driving wheels (replacement wheelset without traction tyres supplied in the accessory pack) Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front pony truck Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater Speaker installed in the tender of all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LNER V2 Class using recordings from real locomotives - N Scale

Graham Farish LNER V2 4791 LNER Lined Green (Original) (N)

LNER V2 4791 LNER Lined Green (Original)  Some twenty years since the V2 was first produced in N scale by Graham Farish, this all-new model of the LNER Mixed Traffic icon is made to standards not even dreamt of twenty years ago. Often described as ‘the engines that won the war’, these new Graham Farish models are sure to win the heart of any discerning N scale enthusiast. Depicting one of the LNER’s most successful steam locomotive designs, this masterpiece in miniature captures the look and the character of the prototype to a tee. With highly detailed mouldings and many separate parts used on both the locomotive and tender, including era- and prototype-specific detailing to allow accurate models of any given class member throughout their working lives, the performance of these new V2s is just as impressive as their appearance. A powerful coreless motor and flywheel is incorporated into the diecast locomotive chassis, powering the driving wheels which run in separate metal bearings. With electrical pickup from the driving wheels and tender wheels and the option to have traction tyres fitted to one driving wheelset, this new V2 is on a steady footing as soon as it hits the rails. With a Next18 DCC decoder socket and pre-fitted speaker located in the tender, this model is future proofed for those wishing to operate on DCC, with or without sound. What’s more, a SOUND FITTED version is also available providing realistic sound effects on both analogue and DCC straight out of the box! Detail Variations Specific To This Model: Pristine LNER Lined Green (Original) livery Running No. 4791 Original ‘Monobloc’ Cylinder Casting with Inside Steam Pipes LNER Smokebox Door without Numberplate and with Lower Top Lamp Bracket Later Style Rocker Arm Guides Group Standard Tender with High-Front/Low-Rear Coal Space Dividers Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 141mm Coreless motor with flywheel Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Sprung front pony truck Cartazzi truck with flanged wheelset (with side swing for operational necessity) Optional traction tyres fitted to the rear driving wheels (replacement wheelset without traction tyres supplied in the accessory pack) Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front pony truck Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater Speaker installed in the tender of all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LNER V2 Class using recordings from real locomotives - N Scale

Graham Farish BR HEA Hopper Wagon BR Bauxite '361728'

BR HEA Hopper Wagon BR Bauxite '361728' The HEA Hopper Wagons were introduced following the success of the HAA Coal Hoppers which were first used in the mid-1960s to deliver coal to power stations as part of the then-new Merry-Go-Round (MGR) trains. The first wagons were built in the mid-1970s as HBAs, but as construction progressed, the design was changed, and the code HEA was used for later batches. The HBAs were subsequently modified to match the HEAs and recoded, giving a total fleet of almost 2,000 HEAs. The wagons replaced ageing wooden- and steel-bodied wagons, delivering household coal to local terminals and reaching all corners of the UK. The HEAs worked in both mixed freight and block train formations. With the demand for household coal in decline, HEAs were used to transport other minerals, like rock salt, and many were rebuilt or recoded, for example some were used as Nuclear Barrier Wagons (RNAs) with their hoppers removed, or box wagons (MEAs) with new box bodies to carry a variety of bulk loads. Features: Pristine BR Bauxite livery Running No. 361728 Length 62mm - Era 7 - N Scale  

Graham Farish BR HEA Hopper Wagon BR Bauxite '360292'

BR HEA Hopper Wagon BR Bauxite '360292' The HEA Hopper Wagons were introduced following the success of the HAA Coal Hoppers which were first used in the mid-1960s to deliver coal to power stations as part of the then-new Merry-Go-Round (MGR) trains. The first wagons were built in the mid-1970s as HBAs, but as construction progressed, the design was changed, and the code HEA was used for later batches. The HBAs were subsequently modified to match the HEAs and recoded, giving a total fleet of almost 2,000 HEAs. The wagons replaced ageing wooden- and steel-bodied wagons, delivering household coal to local terminals and reaching all corners of the UK. The HEAs worked in both mixed freight and block train formations. With the demand for household coal in decline, HEAs were used to transport other minerals, like rock salt, and many were rebuilt or recoded, for example some were used as Nuclear Barrier Wagons (RNAs) with their hoppers removed, or box wagons (MEAs) with new box bodies to carry a variety of bulk loads. Features: Pristine BR Bauxite livery Running No. 360292 Length 62mm - Era 7 - N Scale

Graham Farish BR Mk2F TSO Tourist Second Open Virgin Trains (Original) 6175

BR Mk2F TSO Tourist Second Open Virgin Trains (Original) 6175 Features: Pristine Virgin Trains (Original) livery Running No. 6175 Accessory Pack NEM Coupling Pockets Length 136mm - Era 9 - N Scale

Graham Farish BR Mk1 RMB Restaurant Miniature Buffet BR Maroon SC1829

BR Mk1 RMB Restaurant Miniature Buffet BR Maroon SC1829 Features: Pristine BR Maroon livery Running No. SC829 Commonwealth Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 136mm - Era 5 - N Scale

Graham Farish BR Mk1 BG Brake Gangwayed BR Maroon E81497

BR Mk1 BG Brake Gangwayed BR Maroon E81497 Features: Pristine BR Maroon livery Running No. E81497 BR1 Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 122mm - Era 5 - N Scale

Graham Farish BR Mk2F BSO Brake Second Open Virgin Trains (Original) no 9522

BR Mk2F BSO Brake Second Open Virgin Trains (Original) no 9522 Features: Pristine Virgin Trains (Original) livery Running No. 9522 Accessory Pack NEM Coupling Pockets Length 136mm - Era 9 - N Scale

Graham Farish BR Mk2F BSO Brake Second Open Virgin Trains (Original) no 9531

BR Mk2F BSO Brake Second Open Virgin Trains (Original) no 9531 Features: Pristine Virgin Trains (Original) livery Running No. 9531 Accessory Pack NEM Coupling Pockets Length 136mm - Era 9 - N Scale

Graham Farish BR Mk2F TSO Tourist Second Open Virgin Trains (Original) no 5977

BR Mk2F TSO Tourist Second Open Virgin Trains (Original) no 5977  Features: Pristine Virgin Trains (Original) livery Running No. 5977 Accessory Pack NEM Coupling Pockets Length 136mm - Era 9 - N Scale

Graham Farish BR Mk2F TSO Tourist Second Open Virgin Trains (Original) no 6009

BR Mk2F TSO Tourist Second Open Virgin Trains (Original) no 6009  Features: Pristine Virgin Trains (Original) livery Running No. 6009 Accessory Pack NEM Coupling Pockets Length 136mm - Era 9 - N Scale

Graham Farish BR Mk1 BSK Brake Second Corridor 'Laboratory 11' BR RTC (Revised

BR Mk1 BSK Brake Second Corridor 'Laboratory 11' BR RTC (Revised) Features: Pristine BR RTC (Revised) livery Running No. RDB975046 / Laboratory 11 B4 Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 136mm - Era 8 - N Scale

Graham Farish BR Mk2F TSO Tourist Second Open BR InterCity (Swallow) 6115

BR Mk2F TSO Tourist Second Open BR InterCity (Swallow) 6115 Includes: - Era 8 - Pristine BR InterCity (Swallow) livery - Running No. 6115 - Accessory Pack - NEM Coupling Pockets - Length 136mm - N Scale Vehicle information and history: British Rail’s second generation of standard coach was designated the Mk2, following on from the highly successful Mk1 series. Unlike the Mk1s however, the Mk2s evolved through different build batches, and such were the changes that a letter suffix was attributed to identify each of the different variants. Fewer coach types were built, with construction concentrating on vehicles offering standard accommodation of both first- and second-class, plus coaches that made provision for the Guard and train crew. Specialist vehicles such as catering and sleeping cars were not included, instead BR Mk1 and earlier types continued to fulfil these requirements until Mk3s with similar facilities arrived in the late-1970s to replace them. Like the Mk1s, the Mk2s were of steel construction, but featured more of a monocoque design than the Mk1, which added to their safety and integrity in the event of a collision. The Mk2Fs were the final evolution of the Mk2 family, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Graham Farish model, it’s fair to say that this miniature Mk2F ticks all the boxes. The Distinctive Mk2 shape is captured to a tee whilst the few details that feature on the roof of the prototype, namely the ventilators at each end and the toilet roof panel, are expertly moulded. Each end features separately fitted metal handrails and the end footsteps at each corner are also included. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets, whilst the standard N scale coupling attach via a NEM coupling pocket providing interchangeability with other coupling systems. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance.

Graham Farish BR Mk2F TSO Tourist Second Open ScotRail Saltire 5945

BR Mk2F TSO Tourist Second Open ScotRail Saltire 5945 Includes: - Era 9 - Pristine ScotRail Saltire livery - Running No. 5945 - Accessory Pack - NEM Coupling Pockets - Length 136mm - N Scale  Vehicles information and history: British Rail’s second generation of standard coach was designated the Mk2, following on from the highly successful Mk1 series. Unlike the Mk1s however, the Mk2s evolved through different build batches, and such were the changes that a letter suffix was attributed to identify each of the different variants. Fewer coach types were built, with construction concentrating on vehicles offering standard accommodation of both first- and second-class, plus coaches that made provision for the Guard and train crew. Specialist vehicles such as catering and sleeping cars were not included, instead BR Mk1 and earlier types continued to fulfil these requirements until Mk3s with similar facilities arrived in the late-1970s to replace them. Like the Mk1s, the Mk2s were of steel construction, but featured more of a monocoque design than the Mk1, which added to their safety and integrity in the event of a collision. The Mk2Fs were the final evolution of the Mk2 family, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Graham Farish model, it’s fair to say that this miniature Mk2F ticks all the boxes. The Distinctive Mk2 shape is captured to a tee whilst the few details that feature on the roof of the prototype, namely the ventilators at each end and the toilet roof panel, are expertly moulded. Each end features separately fitted metal handrails and the end footsteps at each corner are also included. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets, whilst the standard N scale coupling attach via a NEM coupling pocket providing interchangeability with other coupling systems. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance.

Graham Farish BR Mk2F BSO Brake Second Open BR InterCity (Swallow)

BR Mk2F BSO Brake Second Open BR InterCity (Swallow) Includes: - Era 8 - Pristine BR InterCity (Swallow) livery - Running No. 9526 - Accessory Pack - NEM Coupling Pockets - Length 136mm - N Scale Vehicle information and history: British Rail’s second generation of standard coach was designated the Mk2, following on from the highly successful Mk1 series. Unlike the Mk1s however, the Mk2s evolved through different build batches, and such were the changes that a letter suffix was attributed to identify each of the different variants. Fewer coach types were built, with construction concentrating on vehicles offering standard accommodation of both first- and second-class, plus coaches that made provision for the Guard and train crew. Specialist vehicles such as catering and sleeping cars were not included, instead BR Mk1 and earlier types continued to fulfil these requirements until Mk3s with similar facilities arrived in the late-1970s to replace them. Like the Mk1s, the Mk2s were of steel construction, but featured more of a monocoque design than the Mk1, which added to their safety and integrity in the event of a collision. The Mk2Fs were the final evolution of the Mk2 family, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Graham Farish model, it’s fair to say that this miniature Mk2F ticks all the boxes. The Distinctive Mk2 shape is captured to a tee whilst the few details that feature on the roof of the prototype, namely the ventilators at each end and the toilet roof panel, are expertly moulded. Each end features separately fitted metal handrails and the end footsteps at each corner are also included. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems.   The B4 bogies are fitted with metal wheelsets, whilst the standard N scale coupling attach via a NEM coupling pocket providing interchangeability with other coupling systems. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance.

Graham Farish BR Mk2F BSO Brake Second Open BR InterCity (Swallow) 9526

BR Mk2F BSO Brake Second Open BR InterCity (Swallow) 9526 Includes: - Era 8 - Pristine BR InterCity (Swallow) livery - Running No. 9526 - Accessory Pack - NEM Coupling Pockets - Length 136mm - N Scale Vehicle information and history: British Rail’s second generation of standard coach was designated the Mk2, following on from the highly successful Mk1 series. Unlike the Mk1s however, the Mk2s evolved through different build batches, and such were the changes that a letter suffix was attributed to identify each of the different variants. Fewer coach types were built, with construction concentrating on vehicles offering standard accommodation of both first- and second-class, plus coaches that made provision for the Guard and train crew. Specialist vehicles such as catering and sleeping cars were not included, instead BR Mk1 and earlier types continued to fulfil these requirements until Mk3s with similar facilities arrived in the late-1970s to replace them. Like the Mk1s, the Mk2s were of steel construction, but featured more of a monocoque design than the Mk1, which added to their safety and integrity in the event of a collision. The Mk2Fs were the final evolution of the Mk2 family, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Graham Farish model, it’s fair to say that this miniature Mk2F ticks all the boxes. The Distinctive Mk2 shape is captured to a tee whilst the few details that feature on the roof of the prototype, namely the ventilators at each end and the toilet roof panel, are expertly moulded. Each end features separately fitted metal handrails and the end footsteps at each corner are also included. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets, whilst the standard N scale coupling attach via a NEM coupling pocket providing interchangeability with other coupling systems. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance.

Graham Farish BR Mk2F BSO Brake Second Open ScotRail Saltire 9527

BR Mk2F BSO Brake Second Open ScotRail Saltire 9527 Includes: - Era 9 - Pristine ScotRail Saltire livery - Running No. 9527 - Accessory Pack - NEM Coupling Pockets - Length 136mm - N Scale Vehicle information and history: British Rail’s second generation of standard coach was designated the Mk2, following on from the highly successful Mk1 series. Unlike the Mk1s however, the Mk2s evolved through different build batches, and such were the changes that a letter suffix was attributed to identify each of the different variants. Fewer coach types were built, with construction concentrating on vehicles offering standard accommodation of both first- and second-class, plus coaches that made provision for the Guard and train crew. Specialist vehicles such as catering and sleeping cars were not included, instead BR Mk1 and earlier types continued to fulfil these requirements until Mk3s with similar facilities arrived in the late-1970s to replace them. Like the Mk1s, the Mk2s were of steel construction, but featured more of a monocoque design than the Mk1, which added to their safety and integrity in the event of a collision. The Mk2Fs were the final evolution of the Mk2 family, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Graham Farish model, it’s fair to say that this miniature Mk2F ticks all the boxes. The Distinctive Mk2 shape is captured to a tee whilst the few details that feature on the roof of the prototype, namely the ventilators at each end and the toilet roof panel, are expertly moulded. Each end features separately fitted metal handrails and the end footsteps at each corner are also included. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets, whilst the standard N scale coupling attach via a NEM coupling pocket providing interchangeability with other coupling systems. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance.

Graham Farish BR Mk2F BSO Brake Second Open ScotRail Saltire 9539

BR Mk2F BSO Brake Second Open ScotRail Saltire 9539 Includes: - Era 9 - Pristine ScotRail Saltire livery - Running No. 9539 - Accessory Pack - NEM Coupling Pockets - Length 136mm - N Scale  Vehicle information and history: British Rail’s second generation of standard coach was designated the Mk2, following on from the highly successful Mk1 series. Unlike the Mk1s however, the Mk2s evolved through different build batches, and such were the changes that a letter suffix was attributed to identify each of the different variants. Fewer coach types were built, with construction concentrating on vehicles offering standard accommodation of both first- and second-class, plus coaches that made provision for the Guard and train crew. Specialist vehicles such as catering and sleeping cars were not included, instead BR Mk1 and earlier types continued to fulfil these requirements until Mk3s with similar facilities arrived in the late-1970s to replace them. Like the Mk1s, the Mk2s were of steel construction, but featured more of a monocoque design than the Mk1, which added to their safety and integrity in the event of a collision. The Mk2Fs were the final evolution of the Mk2 family, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Graham Farish model, it’s fair to say that this miniature Mk2F ticks all the boxes. The Distinctive Mk2 shape is captured to a tee whilst the few details that feature on the roof of the prototype, namely the ventilators at each end and the toilet roof panel, are expertly moulded. Each end features separately fitted metal handrails and the end footsteps at each corner are also included. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets, whilst the standard N scale coupling attach via a NEM coupling pocket providing interchangeability with other coupling systems. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance.

Graham Farish LNER Thompson Brake Third Corridor BR Crimson & Cream No. E1931

LNER Thompson Brake Third Corridor BR Crimson & Cream No. E1931 The Graham Farish models of the LNER Thompson Coaches entered traffic to critical acclaim only a few years ago, and these models now return to the range in the stunning LNER Teak Effect livery. Essential for any Eastern Region modeller, every coach is a faithful replica of the prototype, with two vehicle lengths modelled to accurately depict the longer First Corridor, Third Corridor, Brake Third Corridor and Full Brake vehicles, or the shorter Composite Corridors. With the body sporting finely moulded details such as handrails, grab handles and roof vents, below the solebar the vacuum and steam heat pipework is present along with battery boxes, dynamo and brake equipment all fitted between the truss rod frames. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts making every model a masterpiece in miniature. MODEL FEATURES: Pristine BR Crimson & Cream livery Running No. E1931E Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 133mm - Era 4 - N Scale

Graham Farish LNER Thompson Brake Third Corridor LNER Teak Effect No. E1915

LNER Thompson Brake Third Corridor LNER Teak Effect No. E1915 The Graham Farish models of the LNER Thompson Coaches entered traffic to critical acclaim only a few years ago, and these models now return to the range in the stunning LNER Teak Effect livery. Essential for any Eastern Region modeller, every coach is a faithful replica of the prototype, with two vehicle lengths modelled to accurately depict the longer First Corridor, Third Corridor, Brake Third Corridor and Full Brake vehicles, or the shorter Composite Corridors. With the body sporting finely moulded details such as handrails, grab handles and roof vents, below the solebar the vacuum and steam heat pipework is present along with battery boxes, dynamo and brake equipment all fitted between the truss rod frames. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts making every model a masterpiece in miniature. MODEL FEATURES: Pristine LNER Teak Effect livery Running No. E1915 Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 133mm - Era 3 - N Scale

Graham Farish LNER Thompson Composite Corridor BR Crimson & Cream No. E1239E

LNER Thompson Composite Corridor BR Crimson & Cream No. E1239E The Graham Farish models of the LNER Thompson Coaches entered traffic to critical acclaim only a few years ago, and these models now return to the range in the stunning LNER Teak Effect livery. Essential for any Eastern Region modeller, every coach is a faithful replica of the prototype, with two vehicle lengths modelled to accurately depict the longer First Corridor, Third Corridor, Brake Third Corridor and Full Brake vehicles, or the shorter Composite Corridors. With the body sporting finely moulded details such as handrails, grab handles and roof vents, below the solebar the vacuum and steam heat pipework is present along with battery boxes, dynamo and brake equipment all fitted between the truss rod frames. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts making every model a masterpiece in miniature. MODEL FEATURES: Pristine BR Crimson & Cream livery Running No. E1239E Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 126mm - Era 4 - N Scale

Graham Farish LNER Thompson Composite Corridor LNER Teak Effect No. 145

LNER Thompson Composite Corridor LNER Teak Effect LNER No. 145 The Graham Farish models of the LNER Thompson Coaches entered traffic to critical acclaim only a few years ago, and these models now return to the range in the stunning LNER Teak Effect livery. Essential for any Eastern Region modeller, every coach is a faithful replica of the prototype, with two vehicle lengths modelled to accurately depict the longer First Corridor, Third Corridor, Brake Third Corridor and Full Brake vehicles, or the shorter Composite Corridors. With the body sporting finely moulded details such as handrails, grab handles and roof vents, below the solebar the vacuum and steam heat pipework is present along with battery boxes, dynamo and brake equipment all fitted between the truss rod frames. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts making every model a masterpiece in miniature. MODEL FEATURES: Pristine LNER Teak Effect livery Running No. 145 Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 126mm - Era 3 - N Scale

Graham Farish LNER Thompson Brake Third Corridor BR Crimson & Cream No. E1917E

LNER Thompson Brake Third Corridor BR Crimson & Cream No. E1917E The Graham Farish models of the LNER Thompson Coaches entered traffic to critical acclaim only a few years ago, and these models now return to the range in the stunning LNER Teak Effect livery. Essential for any Eastern Region modeller, every coach is a faithful replica of the prototype, with two vehicle lengths modelled to accurately depict the longer First Corridor, Third Corridor, Brake Third Corridor and Full Brake vehicles, or the shorter Composite Corridors. With the body sporting finely moulded details such as handrails, grab handles and roof vents, below the solebar the vacuum and steam heat pipework is present along with battery boxes, dynamo and brake equipment all fitted between the truss rod frames. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts making every model a masterpiece in miniature. MODEL FEATURES: Pristine BR Crimson & Cream livery Running No. E1917E Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 133mm - Era 4 - N Scale

Graham Farish BR Mk1 CK Composite Corridor BR (WR) Chocolate & Cream No. W150

BR Mk1 CK Composite Corridor BR (WR) Chocolate & Cream No. W15060 Crowned as Model of the Year when they were first introduced, the Graham Farish Mk1 Coaches continue to provide N scale modellers with a masterpiece in miniature, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR Chocolate & Cream livery Running No. W15060 BR1 Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 136mm - Era 5 - N Scale

Graham Farish BR Mk1 CK Composite Corridor BR (WR) Chocolate & Cream NoW15072

BR Mk1 CK Composite Corridor BR (WR) Chocolate & Cream No. W15072 Crowned as Model of the Year when they were first introduced, the Graham Farish Mk1 Coaches continue to provide N scale modellers with a masterpiece in miniature, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR Chocolate & Cream livery Running No. W15072 BR1 Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 136mm - Era 5 - N Scale

Graham Farish BR Mk1 BG Brake Gangwayed BR Maroon No. M81314

BR Mk1 BG Brake Gangwayed BR Maroon No. M81314 Crowned as Model of the Year when they were first introduced, the Graham Farish Mk1 Coaches continue to provide N scale modellers with a masterpiece in miniature, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR Maroon livery Running No. M81314 BR1 Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 122mm - Era 5 - N Scale

Graham Farish BR Mk1 BG Brake Gangwayed BR Crimson & Cream

BR Mk1 BG Brake Gangwayed BR Crimson & Cream Crowned as Model of the Year when they were first introduced, the Graham Farish Mk1 Coaches continue to provide N scale modellers with a masterpiece in miniature, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR Crimson & Cream livery Running No. E80803 BR1 Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 122mm - Era 4 - N Scale

Graham Farish BR Mk1 SK Second Corridor BR Sealink

BR Mk1 SK Second Corridor BR Sealink Crowned as Model of the Year when they were first introduced, the Graham Farish Mk1 Coaches continue to provide N scale modellers with a masterpiece in miniature, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR Sealink livery Running No. SC24856 BR1 Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 136mm - Era 7 - N Scale