Graham Farish 8 Plank Wagon End Door 'Modern Transport Liverpool' Grey 1206(N)

8 Plank Wagon End Door 'Modern Transport Liverpool' Grey 1206 Britain’s Railways were developed primarily to move freight and by the early twentieth century, hundreds of independent companies were operating their own wagons to transport their goods around the UK by rail. Fleet sizes ranged from small concerns with a single wagon to large enterprises whose wagon count could run into the hundreds. The majority of wagons in private ownership were wooden bodied open wagons and by far the most common commodity that they carried was coal, although other materials, including coke, minerals and aggregates might also be transported depending on the nature of business conducted by the wagon’s owner. Various types of 8 Plank Wagon were built, and this Graham Farish model depicts one with fixed ends, unloading would therefore be via the side doors and bottom discharge doors, which on the model are neatly engraved into the wagon’s bodyshell which is moulded with crisp plank lines and ironwork detailing. Below the solebar the W irons, axleboxes and springs are all reproduced to great effect, with separate brakes and brake leavers and metal door stops completing the look. The model runs on spoked wheels which are of metal construction whilst metal buffers adorn the bufferbeams. Authentic colours and typefaces are employed during the livery application prototype, completing this high-fidelity model. Details: Pristine ‘Modern Transport Liverpool’ Grey livery Running No. 1206 Features: Length 49mm (over couplings) - N Scale

Graham Farish NER P7 Coal Hopper NCB Black 'B.R.257' (N)

NER P7 Coal Hopper NCB Black 'B.R.257'  The North Eastern Railway (NER) P7 Coal Hopper, and its LNER equivalent the Diagram 12, is the latest all-new wagon to join Graham Farish’s extensive range of N Scale rolling stock. The P7 was the NER’s most successful 20-ton wooden hopper wagon and numbered more than 17,000 by the time of The Grouping in 1924, they revolutionised the movement of coal with each carrying a load 7 times greater the Chaldron Wagons they replaced. Eventually replaced themselves once newer metal-bodied mineral wagons arrived, the final examples of P7 and Diagram 12 hoppers spent their last years in private ownership and internal use. Features: Pristine NCB Black Livery Running No. B.R.257 NER-built P7 with Wooden End Pillars Shortened End Pillars Twin Horizontal End Handrails Single Axle Guards Spoked Wheels Accessory Pack NEM Coupling Pockets Length 55mm (over couplings) - Era 7 - N Scale

Graham Farish NER P7 Coal Hopper North Eastern Railway Grey (ND) '44931' (N)

NER P7 Coal Hopper North Eastern Railway Grey (ND) '44931' The North Eastern Railway (NER) P7 Coal Hopper, and its LNER equivalent the Diagram 12, is the latest all-new wagon to join Graham Farish’s extensive range of N Scale rolling stock. The P7 was the NER’s most successful 20-ton wooden hopper wagon and numbered more than 17,000 by the time of The Grouping in 1924, they revolutionised the movement of coal with each carrying a load 7 times greater the Chaldron Wagons they replaced. Eventually replaced themselves once newer metal-bodied mineral wagons arrived, the final examples of P7 and Diagram 12 hoppers spent their last years in private ownership and internal use. Features: Pristine NER Grey (Northern Division) Livery Running No. 44931 NER-built P7 with Wooden End Pillars Extended End Pillars Single Horizontal End Handrails Coupling Safety Chains Single Axle Guards Spoked Wheels Accessory Pack NEM Coupling Pockets Length 55mm (over couplings) Part of our Railway Celebrations range - Era 2 - N Scale

Graham Farish LNER D12 Coal Hopper 'BSC Ltd' Green 'No. 1' (N)

LNER D12 Coal Hopper 'BSC Ltd' Green 'No. 1' The North Eastern Railway (NER) P7 Coal Hopper, and its LNER equivalent the Diagram 12, is the latest all-new wagon to join Graham Farish’s extensive range of N Scale rolling stock. The P7 was the NER’s most successful 20-ton wooden hopper wagon and numbered more than 17,000 by the time of The Grouping in 1924, they revolutionised the movement of coal with each carrying a load 7 times greater the Chaldron Wagons they replaced. Eventually replaced themselves once newer metal-bodied mineral wagons arrived, the final examples of P7 and Diagram 12 hoppers spent their last years in private ownership and internal use. Features: Pristine BSC Ltd. ‘Cantley Railway’ Green & Black Livery Running No. 1 LNER-built Diagram 12 with Steel End Pillars Single Axle Guards Twin Horizontal End Handrails Spoked Wheels Accessory Pack NEM Coupling Pockets Length 55mm (over couplings) - Era 7 - N Scale

Graham Farish LNER D12 Coal Hopper BR Grey 'E162443' (N)

LNER D12 Coal Hopper BR Grey 'E162443' The North Eastern Railway (NER) P7 Coal Hopper, and its LNER equivalent the Diagram 12, is the latest all-new wagon to join Graham Farish’s extensive range of N Scale rolling stock. The P7 was the NER’s most successful 20-ton wooden hopper wagon and numbered more than 17,000 by the time of The Grouping in 1924, they revolutionised the movement of coal with each carrying a load 7 times greater the Chaldron Wagons they replaced. Eventually replaced themselves once newer metal-bodied mineral wagons arrived, the final examples of P7 and Diagram 12 hoppers spent their last years in private ownership and internal use. Features: Pristine BR Grey Livery Running No. E162443 LNER-built Diagram 12 with Steel End Pillars Single Axle Guards Twin Horizontal End Handrails 3-Hole Disc Wheels Accessory Pack NEM Coupling Pockets Length 55mm (over couplings) - Era 4 - N Scale

Graham Farish LNER D12 Coal Hopper BR Grey 'E162447' (N)

LNER D12 Coal Hopper BR Grey 'E162447'  The North Eastern Railway (NER) P7 Coal Hopper, and its LNER equivalent the Diagram 12, is the latest all-new wagon to join Graham Farish’s extensive range of N Scale rolling stock. The P7 was the NER’s most successful 20-ton wooden hopper wagon and numbered more than 17,000 by the time of The Grouping in 1924, they revolutionised the movement of coal with each carrying a load 7 times greater the Chaldron Wagons they replaced. Eventually replaced themselves once newer metal-bodied mineral wagons arrived, the final examples of P7 and Diagram 12 hoppers spent their last years in private ownership and internal use. Features: Pristine BR Grey Livery Running No. E162447 LNER-built Diagram 12 with Steel End Pillars Single Axle Guards Twin Horizontal End Handrails 3-Hole Disc Wheels Accessory Pack NEM Coupling Pockets Length 55mm (over couplings) - Era 4 - N Scale

Graham Farish LNER D12 Coal Hopper LNER Grey '53511' (N)

LNER D12 Coal Hopper LNER Grey '53511'  The North Eastern Railway (NER) P7 Coal Hopper, and its LNER equivalent the Diagram 12, is the latest all-new wagon to join Graham Farish’s extensive range of N Scale rolling stock. The P7 was the NER’s most successful 20-ton wooden hopper wagon and numbered more than 17,000 by the time of The Grouping in 1924, they revolutionised the movement of coal with each carrying a load 7 times greater the Chaldron Wagons they replaced. Eventually replaced themselves once newer metal-bodied mineral wagons arrived, the final examples of P7 and Diagram 12 hoppers spent their last years in private ownership and internal use. Features: Pristine LNER Grey Livery Running No. 53511 LNER-built Diagram 12 with Steel End Pillars Single Axle Guards Twin Horizontal End Handrails Spoked Wheels Accessory Pack NEM Coupling Pockets Length 55mm (over couplings) - Era 3 - N Scale

Graham Farish LNER D12 Coal Hopper LNER Grey '86224' (N)

LNER D12 Coal Hopper LNER Grey '86224'  The North Eastern Railway (NER) P7 Coal Hopper, and its LNER equivalent the Diagram 12, is the latest all-new wagon to join Graham Farish’s extensive range of N Scale rolling stock. The P7 was the NER’s most successful 20-ton wooden hopper wagon and numbered more than 17,000 by the time of The Grouping in 1924, they revolutionised the movement of coal with each carrying a load 7 times greater the Chaldron Wagons they replaced. Eventually replaced themselves once newer metal-bodied mineral wagons arrived, the final examples of P7 and Diagram 12 hoppers spent their last years in private ownership and internal use. Features: Pristine LNER Grey Livery Running No. 86224 LNER-built Diagram 12 with Steel End Pillars Single Axle Guards Twin Horizontal End Handrails Spoked Wheels Accessory Pack NEM Coupling Pockets Length 55mm (over couplings) - Era 3 - N Scale

Graham Farish 5 Plank China Clay Wagon GWR Grey '94054' (N)

5 Plank China Clay Wagon GWR Grey '94054' China Clay Wagons were synonymous with Cornwall where the largest deposit of Kaolin, known more commonly as china clay, had first been discovered in 1746 by William Cookworthy. The resulting industry made Cornwall the pre-eminent global source of china clay and as railways were established, they were used to transport the material both locally and further afield, to destinations where the material was required, like the Staffordshire potteries. The GWR, and subsequently BR, built open wagons like the one depicted by this Graham Farish model specifically for china clay traffic. With a 9ft wheelbase and 12T capacity, the wooden planked body sat on top of a metal underframe and our model reflects this, with fine detailing engraved and moulded onto the body. The chassis meanwhile incorporates brake gear and sports tie-bars between the axleboxes, along with metal door bangers and turned metal buffers. Spoked metal wheels and NEM coupling pockets complete the model, which is finished in a beautiful and authentic rendition of the GWR Grey livery. Features: Pristine GWR ‘GW’ Grey livery Running No. 94054 Accessory Pack NEM Coupling Pockets Length 46mm (over couplings) - Era 3 - N Scale

Graham Farish 5 Plank China Clay Triple Pack BR Bauxite (Early) w/ Canopy (N)

5 Plank China Clay Triple Pack BR Bauxite (Early) with Flat Canopy China Clay Wagons were synonymous with Cornwall where the largest deposit of Kaolin, known more commonly as china clay, had first been discovered in 1746 by William Cookworthy. The resulting industry made Cornwall the pre-eminent global source of china clay and as railways were established, they were used to transport the material both locally and further afield, to destinations where the material was required, like the Staffordshire potteries. The GWR, and subsequently BR, built open wagons like the one depicted by this Graham Farish model specifically for china clay traffic. With a 9ft wheelbase and 12T capacity, the wooden planked body sat on top of a metal underframe and our model reflects this, with fine detailing engraved and moulded onto the body. The chassis meanwhile incorporates brake gear and sports tie-bars between the axleboxes, along with metal door bangers and turned metal buffers. This triple-pack of wagons is finished in BR Bauxite livery, and each model comes complete with spoked metal wheels and NEM coupling pockets. The three models are also supplied with tarpaulin covers, as used on the real wagons to protect the valuable china clay cargo from the elements. Features: Pristine BR Bauxite (Early) livery Running Nos. B743073, B743077 & B743081 Accessory Pack NEM Coupling Pockets Length 3 x 46mm (over couplings) - Era 5 - N Scale

Graham Farish 3 Plank Wagon 'London Transport' Grey 'B.W.260' (N)

3 Plank Wagon 'London Transport' Grey 'B.W.260' Britain’s railways were developed primarily to move freight and over time, a wide range of wagons were developed to suit the varied cargo that the railway companies had been contracted to transport. Among them were short wheelbase, 3 plank open wagons which had hinged sides allowing them to be lowered, aiding the loading and unloading of cargo. The goods carried by such wagons was varied and could range from loose loads like minerals and aggregate to crates, barrels and even single pieces of machinery or equipment. Basically, anything that could tolerate being exposed to the elements could be carried, although loads could also be sheeted if necessary to offer some protection from weather and general railway dirt. The 3 Plank Wagon depicted by this Graham Farish model is created using an injection moulded wagon body, incorporating hinges along each edge and with securing chains represented at each corner. The wooden deck of the wagon is depicted with crisp engraving to define the separate wooden planks, and this level of detail extends to the wagon’s planked sides, both on the inner and outer faces. Below the solebar the W irons, axleboxes and springs are all reproduced to great effect, complete with separate brakes and brake levers. The model runs on spoked wheels which are of metal construction whilst metal buffers adorn the bufferbeams. Authentic colours and typefaces are employed during the livery application process, completing this high-fidelity model. Features: Pristine London Transport Grey livery Running No. B.W.260 NEM Coupling Pockets Length 50mm (over couplings) - Era 5 - N Scale

Graham Farish 3 Plank Wagon 'Mountsorrel Granite' Grey '127' (N)

3 Plank Wagon 'Mountsorrel Granite' Grey '127' Britain’s railways were developed primarily to move freight and over time, a wide range of wagons were developed to suit the varied cargo that the railway companies had been contracted to transport. Among them were short wheelbase, 3 plank open wagons which had hinged sides allowing them to be lowered, aiding the loading and unloading of cargo. The goods carried by such wagons was varied and could range from loose loads like minerals and aggregate to crates, barrels and even single pieces of machinery or equipment. Basically, anything that could tolerate being exposed to the elements could be carried, although loads could also be sheeted if necessary to offer some protection from weather and general railway dirt. The 3 Plank Wagon depicted by this Graham Farish model is created using an injection moulded wagon body, incorporating hinges along each edge and with securing chains represented at each corner. The wooden deck of the wagon is depicted with crisp engraving to define the separate wooden planks, and this level of detail extends to the wagon’s planked sides, both on the inner and outer faces. Below the solebar the W irons, axleboxes and springs are all reproduced to great effect, complete with separate brakes and brake levers. The model runs on spoked wheels which are of metal construction whilst metal buffers adorn the bufferbeams. Authentic colours and typefaces are employed during the livery application process, completing this high-fidelity model. Features: Wagon is Preserved Pristine Mountsorrel Granite Grey livery Running No. 127 NEM Coupling Pockets Length 50mm (over couplings) - Era 3 - N Scale

Graham Farish BR 12T Plywood Fruit Van Late Bauxite Fyffes 'B875823' (N)

BR 12T Plywood Fruit Van Late Bauxite Fyffes 'B875823' British Railways (BR) inherited a wide range of rolling stock upon Nationalisation in 1948, much of which was aging or in need of modern replacement and so a programme to build new vehicles soon commenced. These new vehicles were built to a variety of standardised designs, for covered vans most of the new designs centred around a 10ft wheelbase chassis with a metal and wood body on top. Alongside general merchandise vans, several specialist types were built including the 12 Ton Fruit Van which employed a metal chassis whilst the van was constructed from a pair of corrugated metal ends, each with a ventilator at the top. The metal body frame was panelled with plywood sheets, and four small ventilators were fitted along the bottom of each side to ventilate the cargo. As the name suggests, the vans were built to transport fruit but in later years they also found use moving general merchandise. The Graham Farish model is a faithful replica of the BR design, using a precision moulded body that accurately captures the corrugated ends, plywood sides and ventilators, along with finer details like the body framing, door hinges and locking mechanisms. The roof includes the characteristic rain strips above each set of double doors and the rivets securing the roof are neatly moulded at either end. The chassis is similarly detailed, being fitted with separate brake gear, brake handles and vacuum cylinders, complete with the linkage between the two ‘V’ hangers. Metal wheels and axles are employed, along with turned metal buffers; meanwhile for the first time the couplings are fitted via NEM coupling pockets allowing full interchangeability for those wishing to use an alternative coupling system. Features: Pristine BR Bauxite (Late) livery Running No. B875823 NEM Coupling Pockets Length 49mm (over couplings) - Era 5 - N Scale

Graham Farish BR 12T Vent Van Early Bauxite ICI Fertilizer 'B761075' (N)

BR 12T Vent Van Early Bauxite ICI Fertilizer 'B761075' British Railways (BR) inherited a wide range of rolling stock upon Nationalisation in 1948, much of which was aging or in need of modern replacement and so a programme to build new vehicles soon commenced. These new vehicles were built to a variety of standardised designs and the 12 Ton Ventilated Van, which was used to transport general merchandise, was one of the most numerous types of freight vehicle built by BR. Employing a metal chassis, the van was constructed from corrugated metal ends with a ventilator in each, with a metal body frame which was panelled with wood. All manner of merchandise could be transported whilst remaining protected from the elements, and some vans could also be adorned with marketing posters for the products that may be contained within – in the case of this example ICI Fertilizer branding is applied. The Graham Farish model is a faithful replica of the humble 12T Van, using a precision moulded body that accurately captures the corrugated ends and planked sides, along with finer details like the body framing, door hinges and locking mechanisms. The roof includes the characteristic rain strips above each set of double doors and the rivets securing the roof are neatly moulded at either end. The chassis is similarly detailed, being fitted with separate brake gear, brake handles and vacuum cylinders, complete with the linkage between the two ‘V’ hangers. Metal wheels and axles are employed, along with turned metal buffers; meanwhile for the first time the couplings are fitted via NEM coupling pockets allowing full interchangeability for those wishing to use an alternative coupling system. Features: Pristine BR Bauxite (Early) livery Running No. B761075 NEM Coupling Pockets Length 49mm (over couplings) - Era 4 - N Scale

Graham Farish BR 10T Meat Van BR Crimson 'B870009' (N)

BR 10T Meat Van BR Crimson 'B870009' British Railways (BR) inherited a wide range of rolling stock upon Nationalisation in 1948, much of which was aging or in need of modern replacement and so a programme to build new vehicles soon commenced. These new vehicles were built to a variety of standardised designs, for covered vans most of the new designs centred around a 10ft wheelbase chassis with a metal and wood body on top. Alongside general merchandise vans, several specialist types were built including the 10 Ton Meat Van which employed a metal chassis whilst the van was constructed from a pair of corrugated metal ends, in the centre of which was a row of four ventilator. The metal body frame was panelled with wooden planks, and further ventilators were fitted either side of the double doors. As the name suggests, the vans were built to transport meat but in later years also found use moving general merchandise. The Graham Farish model is a faithful replica of the BR design, using a precision moulded body that accurately captures the corrugated ends, planked sides and ventilators, along with finer details like the body framing, door hinges and locking mechanisms. The roof includes the characteristic rain strips above each set of double doors and the rivets securing the roof are neatly moulded at either end. The chassis is similarly detailed, being fitted with separate brake gear, brake handles and vacuum cylinders, complete with the linkage between the two ‘V’ hangers. Metal wheels and axles are employed, along with turned metal buffers; meanwhile for the first time the couplings are fitted via NEM coupling pockets allowing full interchangeability for those wishing to use an alternative coupling system. Features: Pristine BR Crimson livery Running No. B870009 NEM Coupling Pockets Length 49mm (over couplings) - Era 4 - N Scale

Graham Farish BR 10T Meat Van Early Bauxite 'B870030' (N)

BR 10T Meat Van Early Bauxite 'B870030' British Railways (BR) inherited a wide range of rolling stock upon Nationalisation in 1948, much of which was aging or in need of modern replacement and so a programme to build new vehicles soon commenced. These new vehicles were built to a variety of standardised designs, for covered vans most of the new designs centred around a 10ft wheelbase chassis with a metal and wood body on top. Alongside general merchandise vans, several specialist types were built including the 10 Ton Meat Van which employed a metal chassis whilst the van was constructed from a pair of corrugated metal ends, in the centre of which was a row of four ventilator. The metal body frame was panelled with wooden planks, and further ventilators were fitted either side of the double doors. As the name suggests, the vans were built to transport meat but in later years also found use moving general merchandise. The Graham Farish model is a faithful replica of the BR design, using a precision moulded body that accurately captures the corrugated ends, planked sides and ventilators, along with finer details like the body framing, door hinges and locking mechanisms. The roof includes the characteristic rain strips above each set of double doors and the rivets securing the roof are neatly moulded at either end. The chassis is similarly detailed, being fitted with separate brake gear, brake handles and vacuum cylinders, complete with the linkage between the two ‘V’ hangers. Metal wheels and axles are employed, along with turned metal buffers; meanwhile for the first time the couplings are fitted via NEM coupling pockets allowing full interchangeability for those wishing to use an alternative coupling system. Features: Pristine BR Bauxite (Early) livery Running No. B870030 NEM Coupling Pockets Length 49mm (over couplings) - Era 4 - N Scale

Graham Farish BR 10T Meat Van Early Bauxite 'B870085' (N)

BR 10T Meat Van Early Bauxite 'B870085' British Railways (BR) inherited a wide range of rolling stock upon Nationalisation in 1948, much of which was aging or in need of modern replacement and so a programme to build new vehicles soon commenced. These new vehicles were built to a variety of standardised designs, for covered vans most of the new designs centred around a 10ft wheelbase chassis with a metal and wood body on top. Alongside general merchandise vans, several specialist types were built including the 10 Ton Meat Van which employed a metal chassis whilst the van was constructed from a pair of corrugated metal ends, in the centre of which was a row of four ventilator. The metal body frame was panelled with wooden planks, and further ventilators were fitted either side of the double doors. As the name suggests, the vans were built to transport meat but in later years also found use moving general merchandise. The Graham Farish model is a faithful replica of the BR design, using a precision moulded body that accurately captures the corrugated ends, planked sides and ventilators, along with finer details like the body framing, door hinges and locking mechanisms. The roof includes the characteristic rain strips above each set of double doors and the rivets securing the roof are neatly moulded at either end. The chassis is similarly detailed, being fitted with separate brake gear, brake handles and vacuum cylinders, complete with the linkage between the two ‘V’ hangers. Metal wheels and axles are employed, along with turned metal buffers; meanwhile for the first time the couplings are fitted via NEM coupling pockets allowing full interchangeability for those wishing to use an alternative coupling system. Features: Pristine BR Bauxite (Early) livery Running No. B870085 NEM Coupling Pockets Length 49mm (over couplings) - Era 4 - N Scale

Graham Farish BR 12T Plywood Fruit Van Late Bauxite 'B875840' (N)

BR 12T Plywood Fruit Van Late Bauxite 'B875840' British Railways (BR) inherited a wide range of rolling stock upon Nationalisation in 1948, much of which was aging or in need of modern replacement and so a programme to build new vehicles soon commenced. These new vehicles were built to a variety of standardised designs, for covered vans most of the new designs centred around a 10ft wheelbase chassis with a metal and wood body on top. Alongside general merchandise vans, several specialist types were built including the 12 Ton Fruit Van which employed a metal chassis whilst the van was constructed from a pair of corrugated metal ends, each with a ventilator at the top. The metal body frame was panelled with plywood sheets, and four small ventilators were fitted along the bottom of each side to ventilate the cargo. As the name suggests, the vans were built to transport fruit but in later years they also found use moving general merchandise. The Graham Farish model is a faithful replica of the BR design, using a precision moulded body that accurately captures the corrugated ends, plywood sides and ventilators, along with finer details like the body framing, door hinges and locking mechanisms. The roof includes the characteristic rain strips above each set of double doors and the rivets securing the roof are neatly moulded at either end. The chassis is similarly detailed, being fitted with separate brake gear, brake handles and vacuum cylinders, complete with the linkage between the two ‘V’ hangers. Metal wheels and axles are employed, along with turned metal buffers; meanwhile for the first time the couplings are fitted via NEM coupling pockets allowing full interchangeability for those wishing to use an alternative coupling system. Features: Pristine BR Bauxite (Late) livery Running No. B875840 NEM Coupling Pockets Length 49mm (over couplings) - Era 5 - N Scale

Graham Farish LMS Stanier 50ft Full Brake BR Maroon 'M31248M'

LMS Stanier 50ft Full Brake BR Maroon 'M31248M' Features: Pristine BR Maroon livery Running No. M31248M Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 115mm (over couplings) The LMS built coaches to three distinct patterns, known commonly as Period 1, 2 and 3 coaches. The Period 3 coaches were the final development, and the first examples were built in 1933, a year after Sir William Stanier became Chief Mechanical Engineer of the LMS and so the Period 3 coaches are often referred to as ‘Stanier Coaches’. Whilst passenger vehicles were mostly 57ft in length, several specialist types including catering vehicles, Inspection Saloons and Full Brakes were built to a length of 50ft. The vehicles were constructed with wooden frames skinned in steel and with curved windows, providing a modern contrast to earlier types with their wooden bodies and squarer windows. The Full Brakes were used to carry luggage, parcels and other general merchandise and could be found marshalled as part of both passenger and parcel trains, and with their integral guard’s compartment the guard could often be found travelling here too. Many Full Brakes remained in traffic well into the British Railways era and after the demise of steam too, with some examples ending up in departmental or engineer’s use following their withdrawal from revenue earning service. The Graham Farish model captures the look of Stanier’s design to a tee, with a high fidelity bodyshell featuring expertly moulded handrails, door handles, hinges and even door stops, all replicated crisply on the bodysides. At either end, the LMS pattern gangways are added, whilst end steps are fitted alongside and a metal handrail is included adjacent to them and metal buffers are fitted below. Each window is flush glazed and inside, the guard’s compartment is modelled along with the hand brake wheel. Footboards are fitted along the solebar, below which vacuum brake equipment is present along with the battery boxes, dynamo and other auxiliary gear. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Like any Graham Farish model, this high level of detail is brought to life through the livery application, using authentic colours, logos and fonts making every model a masterpiece in miniature. - Era 5 - N Scale

Graham Farish BR HEA Hopper Wagon BR Bauxite '361728'

BR HEA Hopper Wagon BR Bauxite '361728' The HEA Hopper Wagons were introduced following the success of the HAA Coal Hoppers which were first used in the mid-1960s to deliver coal to power stations as part of the then-new Merry-Go-Round (MGR) trains. The first wagons were built in the mid-1970s as HBAs, but as construction progressed, the design was changed, and the code HEA was used for later batches. The HBAs were subsequently modified to match the HEAs and recoded, giving a total fleet of almost 2,000 HEAs. The wagons replaced ageing wooden- and steel-bodied wagons, delivering household coal to local terminals and reaching all corners of the UK. The HEAs worked in both mixed freight and block train formations. With the demand for household coal in decline, HEAs were used to transport other minerals, like rock salt, and many were rebuilt or recoded, for example some were used as Nuclear Barrier Wagons (RNAs) with their hoppers removed, or box wagons (MEAs) with new box bodies to carry a variety of bulk loads. Features: Pristine BR Bauxite livery Running No. 361728 Length 62mm - Era 7 - N Scale  

Graham Farish BR HEA Hopper Wagon BR Bauxite '360292'

BR HEA Hopper Wagon BR Bauxite '360292' The HEA Hopper Wagons were introduced following the success of the HAA Coal Hoppers which were first used in the mid-1960s to deliver coal to power stations as part of the then-new Merry-Go-Round (MGR) trains. The first wagons were built in the mid-1970s as HBAs, but as construction progressed, the design was changed, and the code HEA was used for later batches. The HBAs were subsequently modified to match the HEAs and recoded, giving a total fleet of almost 2,000 HEAs. The wagons replaced ageing wooden- and steel-bodied wagons, delivering household coal to local terminals and reaching all corners of the UK. The HEAs worked in both mixed freight and block train formations. With the demand for household coal in decline, HEAs were used to transport other minerals, like rock salt, and many were rebuilt or recoded, for example some were used as Nuclear Barrier Wagons (RNAs) with their hoppers removed, or box wagons (MEAs) with new box bodies to carry a variety of bulk loads. Features: Pristine BR Bauxite livery Running No. 360292 Length 62mm - Era 7 - N Scale

Graham Farish BR 16T Steel Mineral Wagon w/Top Flap Doors BR Grey [W] B168339

BR 16T Steel Mineral Wagon with Top Flap Doors BR Grey [W] B168339 Coal fuelled Britain during the twentieth century and much of this fuel was transported by rail. The 16 Ton Steel Mineral Wagon began as a wartime design, but following Nationalisation hundreds of thousands of these humble four wheel wagons would be ordered by BR to move coal around the UK, replacing the wooden-bodied wagons that had been inherited from the ‘Big Four’ railway companies and private owners. This Graham Farish model depicts a wagon with end doors, and side doors which have top flaps – this aided manual unloading in coal yards – and the model features separately fitted door stops, brake gear, linkage and hand brake levers, and is fitted with metal buffers. Features: Weathered BR Grey livery Running No. B168339 Length 41mm - Era 4 - N Scale  

Graham Farish BR 16T Steel Mineral Wagon with Top Flap Doors BR Grey [W]

BR 16T Steel Mineral Wagon with Top Flap Doors BR Grey [W] Coal fuelled Britain during the twentieth century and much of this fuel was transported by rail. The 16 Ton Steel Mineral Wagon began as a wartime design, but following Nationalisation hundreds of thousands of these humble four wheel wagons would be ordered by BR to move coal around the UK, replacing the wooden-bodied wagons that had been inherited from the ‘Big Four’ railway companies and private owners. This Graham Farish model depicts a wagon with end doors, and side doors which have top flaps – this aided manual unloading in coal yards – and the model features separately fitted door stops, brake gear, linkage and hand brake levers, and is fitted with metal buffers. MODEL FEATURES: Weathered BR Grey livery Running No. B161589 Length 41mm - Era 4 - N Scale