Graham Farish Class 101 2-Car 'Power Twin' DMU BR Green (Sound Fitted) (N)

Class 101 2-Car 'Power Twin' DMU BR Green (Speed Whiskers) (Sound Fitted) The Class 101 Diesel Multiple Units were the most numerous of all the first generation DMUs and had a long service life, remaining in use for almost half a century, and we’re delighted to present N Scale models of this iconic unit as part of the Graham Farish range. This two-car unit depicts a ‘Power Twin’ comprising two vehicles equipped with an engine and the associated transmission and whilst all of these details are replicated faithfully on the Graham Farish model, just one of the vehicles is motorised. Each of the two cars is constructed from precision moulded bodyshells with flush glazing and a high level of raised and engraved detailing, from the ventilators and rivets found on the roof to the door furniture and window frames along each bodyside. Each chassis is adorned with all the underframe components you’d see on the prototype, including the engine, transmission, battery boxes and auxiliary gear. Both vehicles are brought to life with an exquisite livery application, using accurate colours, fonts and logos, and the detail and decoration extends to the interior too, where seating is fitted and painted accordingly, and the cab provides crew seats along with a representation of the control desk. The bogies are moulded with a high level of relief detail and separate footsteps are added where appropriate, meanwhile metal wheelsets are employed and electrical pickups from every wheel provide power for the directional lights at each cab end. The motorised vehicle is fitted with a powerful three pole motor with flywheel and both cars have a 6 pin DCC decoder socket; in the trailer a function decoder can be used to work the directional lights whereas the powered vehicle has a pre-fitted speaker so a sound decoder could be fitted to add sound to the model Details: Pristine BR Green livery with Speed Whiskers 2-Car Unit comprising DMBS No. E51427 and DMCL No. E51497 Destination Blinds for Bradford and Doncaster Headcode B6 displayed at both ends Features: Accessory Pack NEM Coupling Pockets Powerful 3 Pole Motor with Flywheel Interior Detailing Directional Lighting Speaker Fitted Equipped with two 6 Pin DCC Decoder Sockets – recommended Decoder 2 x item No. 36-568A Length 262mm (over couplings) - N Scale

Graham Farish Class 101 2-Car DMU BR Regional Railways (Sound Fitted) (N)

Class 101 2-Car DMU BR Regional Railways (Sound Fitted) The Class 101 Diesel Multiple Units were the most numerous of all the first generation DMUs and had a long service life, remaining in use for almost half a century, and we’re delighted to present N Scale models of this iconic unit as part of the Graham Farish range. This two-car unit depicts a Class 101 in later life and having received a few modifications from its original condition, like the fitting of high intensity headlights and the addition of bodyside heater louvres. Each of the two cars is constructed from precision moulded bodyshells with flush glazing and a high level of raised and engraved detailing, from the ventilators and rivets found on the roof to the door furniture and window frames along each bodyside. Each chassis is adorned with all the underframe components you’d see on the prototype, including the engine, transmission, battery boxes and auxiliary gear. Both vehicles are brought to life with an exquisite livery application, using accurate colours, fonts and logos, and the detail and decoration extends to the interior too, where seating is fitted and painted accordingly, and the cab provides crew seats along with a representation of the control desk. The bogies are moulded with a high level of relief detail and separate footsteps are added where appropriate, meanwhile metal wheelsets are employed and electrical pickups from every wheel provide power for the directional lights at each cab end. The motorised vehicle is fitted with a powerful three pole motor with flywheel and both cars have a 6 pin DCC decoder socket; in the trailer a function decoder can be used to work the directional lights whereas the powered vehicle has a pre-fitted speaker so a sound decoder could be fitted to add sound to the model Details: Pristine BR Regional Railways livery Set No. 101660 2-Car Unit comprising DMBS No. 51189 and DTSL No. 54343 Destination Blinds for Sheffield and Manchester Piccadilly Features: Accessory Pack NEM Coupling Pockets Powerful 3 Pole Motor with Flywheel Interior Detailing Directional Lighting Speaker Fitted Equipped with two 6 Pin DCC Decoder Sockets – recommended Decoder 2 x item No. 36-568A Length 262mm (over couplings) - N Scale

Graham Farish GWR 4073 'Castle' 5015 'Kingswear Castle' BR Green Early (SF)(N)

GWR 4073 'Castle' 5015 'Kingswear Castle' BR Lined Green Early Emblem (Sound Fitted) The model that started a revolution as the first British N Scale steam locomotive to be made with SOUND FITTED, the Graham Farish ‘Castle’ has a technical specification as impressive as its good looks, with a powerful coreless motor driving the wheels through a diecast metal gearbox, all wheel pickup from the driving and tender wheels and separate metal bearings fitted to the driving wheel axles, smooth and reliable running is guaranteed. The tender houses a speaker and Next18 DCC decoder socket, making it easy to add sound, or opt for a SOUND FITTED version and the work is done for you, so you can enjoy realistic sound effects straight from the box on both Analogue and DCC. Details on this model: Pristine BR Lined Green (Early Emblem) Livery Running No. 5015 Named ‘Kingswear Castle’ Collett 4,000-gallon Tender Single Chimney Inside Cylinder Chest: Box Pattern with Straight Front Curved Cylinder Steam Pipes Tapered Buffers Horizontal Cab Side Handrail Rear Sandboxes Behind Cab Steps Short Nameplates Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 145mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater High-precision, injection-moulded bodyshell, running plate and tender with separately fitted details parts including smokebox door, lower front lamp irons, steam pipes, whistle and reverser Separately applied metal components including handrails, buffers and sand pipes Dome, filler cap, water scoop and vacuum pipe added to the tender as separate parts Tender fitted with metal coal-effect load Detailed cab interior including boiler backhead controls and gauges, brake standard and water scoop standard Hinged and posable metal fall plate between the locomotive and tender Each model supplied with a full set of accessory parts including dummy screwlink couplings and front vacuum pipe Speaker installed in the tender of all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions - N Scale

Graham Farish GWR 4073 'Castle' 5055 'Earl of Eldon' GWR Lined Green (SF) (N)

GWR 4073 'Castle' 5055 'Earl of Eldon' GWR Lined Green (GW Crest) (Sound Fitted) The model that started a revolution as the first British N Scale steam locomotive to be made with SOUND FITTED, the Graham Farish ‘Castle’ has a technical specification as impressive as its good looks, with a powerful coreless motor driving the wheels through a diecast metal gearbox, all wheel pickup from the driving and tender wheels and separate metal bearings fitted to the driving wheel axles, smooth and reliable running is guaranteed. The tender houses a speaker and Next18 DCC decoder socket, making it easy to add sound, or opt for a SOUND FITTED version and the work is done for you, so you can enjoy realistic sound effects straight from the box on both Analogue and DCC. Details on this model: Pristine GWR Lined Green (GW Crest) Livery Running No. 5055 Named ‘Earl of Eldon’ Collett 4,000-gallon Tender Single Chimney Inside Cylinder Chest: Box Pattern with Curved Front Straight Cylinder Steam Pipes Tapered Buffers Horizontal Cab Side Handrail Rear Sandboxes Behind Cab Steps Short Nameplates Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 145mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater High-precision, injection-moulded bodyshell, running plate and tender with separately fitted details parts including smokebox door, lower front lamp irons, steam pipes, whistle and reverser Separately applied metal components including handrails, buffers and sand pipes Dome, filler cap, water scoop and vacuum pipe added to the tender as separate parts Tender fitted with metal coal-effect load Detailed cab interior including boiler backhead controls and gauges, brake standard and water scoop standard Hinged and posable metal fall plate between the locomotive and tender Each model supplied with a full set of accessory parts including dummy screwlink couplings and front vacuum pipe Speaker installed in the tender of all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions - N Scale

Graham Farish Class 47/0 D1565 BR Green (Small Yellow Panels) DCC Sound

Class 47/0 D1565 BR Green (Small Yellow Panels) DCC Sound The Class 47 was British Railways’ most prolific class of main-line diesel locomotive and so it’s no surprise that high fidelity models of these ever-popular machines are available in N Scale as part of the flagship Graham Farish range. This model tells the story of the Class’s early days of service, sporting original features and carrying the iconic two-tone green livery in which the majority of the fleet was outshopped, complete with small yellow warning panels at either end. Features: SOUND FITTED – Fitted with a ESU Loksound V5DCC Sound Decoder Length 139mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from eight wheels Diecast metal chassis block Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting, switchable on/off (when used on DCC only) Speaker installed in all models for optimum sound reproduction Detail Specific To This Model: Pristine BR Green (Small Yellow Panels) livery Running No. D1565 Glazed Headcode Panels Displaying Blinds 1E11 and 4N09 Twin Arm Windscreen Wipers High Intensity Headlight Round Buffers Bodyside Step below Cab Door Full Cab Roof Vents Original Three-Piece Radiator Grilles Ribbed Exhaust Panels Spanner Mk3 Roof Boiler Port 1,250 Gallon Water Tanks with Water Chutes Open Bogie-mounted Cab Steps - Era 5 - N Scale

Graham Farish Class 47/7 47712 'Lady Diana Spencer' BR ScotRail (SF) (N)

Class 47/7 47712 'Lady Diana Spencer' BR ScotRail The Class 47 was British Railways’ most prolific class of main-line diesel locomotive and so it’s no surprise that high fidelity models of these ever-popular machines are available in N Scale as part of the flagship Graham Farish range. Such was their success that Class 47s went through various upgrade and refurbishment programmes during their careers, to extend their lives or ready them for new services, and the Class 47/7 sub-class is just one example – these locomotives being fitted with extended range fuel tanks and cab-front jumper cables to work push-pull trains in Scotland. No. 47712 ‘Lady Diana Spencer’ was one of the first twelve locomotives converted to a 47/7, having entered works as Class 47/4 No. 47505, and is modelled in the striking BR ScotRail livery with bold grey, white and blue bodyside bands and large yellow ends and cab rooves. The real locomotive survives in preservation today, and has recently been returned to service on the main line, in much the same 1980s condition as depicted by our model. ‘Lady Diana Spencer’ takes full advantage to the recent upgrades that have benefited the Graham Farish Class 47, namely the technical advancements which see the model boasting a Next18 DCC decoder interface, pre-fitted speaker, cab lighting (when used on DCC) and independent control of the directional lights at each end. Features: Pristine BR ScotRail livery Running No. 47712 Named ‘Lady Diana Spencer’ SOUND FITTED – Fitted with a ESU Loksound V5DCC Sound Decoder Length 139mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from eight wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities Bogie-mounted coupling pockets to NEM355 standards at each end Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail Separately applied detail parts, including lamp irons, cab handrails and roof aerial (where applicable) Separately fitted battery box/water/fuel tank assembly Cab Interior Detailing Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting, switchable on/off (when used on DCC only) Speaker installed in all models for optimum sound reproduction Details Specific to this Model: Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Cab-Front-mounted ETH Equipment Scottish Jumper Cables Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Smooth Exhaust Panels Plated Clayton Roof Boiler Port Water Tanks Removed Later Extended Range Fuel Tanks NRN Aerials Plated Bogie-mounted Cab Steps - Era 8 - N Scale

Graham Farish LMS 10001 BR Green (Late Crest) - DCC Sound Fitted

LMS 10001 BR Green (Late Crest) - DCC Sound Fitted The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and now, this pioneering pair is available in N scale as part of the Graham Farish range. Features: Pristine BR Green (Late Crest) livery Running No. 10001 Six Headcode Lights & Brackets at each end Smooth Bodysides (No Steps) Water Scoops Fitted Modified Exhaust Panels (with vent grilles) Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 127mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail, including separately fitted metal sand pipes Separately applied underframe and roof detail components Separate lamp irons fitted to each nose Detailed cab interior Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Passenger/Freight mode, switchable on Analogue control and with additional configurations available when used on DCC Cab lighting, switchable on/off (leading end, when used on DCC only) Authentic light colours and temperatures selected for each model based on era and application Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LMS 10000/10001 using recordings from real locomotives - Era 5 - N Scale

Graham Farish LMS 10000 BR Black (Early Emblem) - DCC Sound Fitted

LMS 10000 BR Black (Early Emblem) - DCC Sound Fitted The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and now, this pioneering pair is available in N scale as part of the Graham Farish range. Features: Pristine BR Black & Silver Early Emblem livery Running No. 10000 Four Headcode Lights & Brackets at each end Bodyside Steps Original Exhaust Panels Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 127mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail, including separately fitted metal sand pipes Separately applied underframe and roof detail components Separate lamp irons fitted to each nose Detailed cab interior Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Passenger/Freight mode, switchable on Analogue control and with additional configurations available when used on DCC Cab lighting, switchable on/off (leading end, when used on DCC only) Authentic light colours and temperatures selected for each model based on era and application Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LMS 10000/10001 using recordings from real locomotives - Era 4 - N Scale

Graham Farish Class 158 2-Car DMU 158816 BR Regional Railways DCC S/F

The Class 158 is one of British Rail’s most successful second generation Diesel Multiple Units (DMUs); first introduced in 1989, all but one of the original units remain in traffic to this day. This all-new Graham Farish model follows in the footsteps of the brand’s award winning Class 319 Electric Multiple Unit and captures this iconic prototype to a tee. The pinnacle of N scale second generation DMUs, the Graham Farish Class 158 combines high fidelity bodyshells with an underframe that’s adorned with separate components depicting the engines, electrical equipment, and auxiliary gear. It’s the livery application which really brings these models to life and every element has been replicated in miniature. Whilst the main colours are spray painted, the myriad smaller logos, symbols and lettering are applied using a specialist printing process, using BR and corporate specification fonts, logos and colours. Driven by the low-level drive mechanism, each vehicle sports uninterrupted views of the interior which is fitted out with tables, chairs and even metal luggage racks – made visible thanks to the saloon lighting. The inter-vehicle coupling system ensure that the two vehicles work together in harmony and enables the use of a single decoder for DCC operation. Fitting that decoder couldn’t be easier thanks to the clip-off underframe panel behind which the decoder socket is fitted and combined with the pre-fitted speaker, it’s easy to fit sound to your model Features: Pristine BR Regional Railways livery Running No. 158816 Two-Car Unit comprising car Nos. 52816 & 57816 Destination blinds for Milford Haven Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B Length 315mm Coreless, twin shaft motor with two flywheels providing drive to both bogies of the DMS (A) vehicle Four axle drive (all axles on the DMS (A) vehicle) Electrical pickup from all wheels Highly detailed bodyshell with flush, tinted glazing Unobstructed interior including seat and table detail Bogies constructed from multiple components featuring full relief detail Separately applied underframe equipment and detail components Separately applied metal detail parts, including exhaust guards and interior luggage racks Each model is supplied with an accessory pack comprising exhaust pipes and cab end connector door covers (where appropriate) Directional lighting, including illuminated destination panels, switchable on/off at either end on DCC or Analogue control Cab and saloon interior lighting, switchable on/off via the under-chassis switches Authentic light colours and temperatures selected for each model based on era and application Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Detail Variations Specific To This Model: Original Air Conditioning Toilet Discharge via Coupler Box (Car A Only) Perkins Engine Original Heather Standard Air Dam Original Light Cluster Gangway Doors with Small Windows - Era 8 - N Scale

Graham Farish LMS Ivatt 2MT 6409 LMS Black DCC S/F

LMS Ivatt 2MT 6409 LMS Black - DCC Sound Fitted This Award Winning model certainly packs a punch when it comes to the detail, with separate metal handrails found throughout the locomotive and tender, lubricators and sand boxes along the running plate and separate pipework running from below the cab to the top feed on the boiler. The turned brass safety valves and whistle contrast beautifully with the firebox on which they are mounted, whilst inside the cab, the moulded back head detail has been decorated to pick out the individual gauges and controls. A hinged tender fall-plate provides the finishing touch to the highly impressive cab of this model. When it comes to performance it’s hard not to marvel as you watch the Walschaerts valve gear in motion. The powerful coreless motor provides drive to the centre pair of driving wheels, whilst all six driving wheels are fitted with separate metal bearings and a pair of traction tyres are fitted to the rear driving wheels to aid traction. Electrical pick-up comes via all six driving wheels and all six tender wheels, with a semi-permanent loco-tender coupling system to ensure the two stay firmly coupled at all times.  MODEL FEATURES: - Pristine LMS Black livery - Running No. 6409 - Accessory Pack - NEM Coupling Pockets - Powerful Coreless Motor - Loco-drive Mechanism - Tender Pick-ups - Speaker Fitted - Length 112mm - Era 3 - N Scale IVATT 2MT HISTORY: Designed by H. G. Ivatt for the London, Midland & Scottish Railway (LMS), 128 of these Class 2 Moguls were built for light freight and passenger duties. With construction commencing in 1946, just twenty examples were built by the LMS and the remaining 108 were outshopped by British Railways following Nationalisation in 1948. The construction programme was completed in 1952 and these Mixed Traffic locomotives would go on to operate on all the BR regions, with the exception of the Southern. Light axle loadings allowed the Ivatt 2MTs to be used on most routes including branch lines, where their almost enclosed cabs made them ideal for working tender first when no turning facilities existed. The design provided the basis for the BR Standard Class 2MT 2-6-0, and the two are very similar in appearance, with the Standard version having only a modified cab and tender profile to allow unrestricted route availability across the British network. With BR progressively closing more and more branch lines, and rationalising others – often employing new diesel multiple units to provide a more economical passenger service – duties for small locomotives like the Ivatt 2MTs began to disappear and the decline of the class began in 1961 when the first example was withdrawn. The Mogul’s versatility and its relatively modern design however ensured that many examples were still in traffic until the mid-1960s, but by 1967 all had been withdrawn. Thankfully, seven Ivatt 2MT have been preserved and the type is an ideal source of motive power for many of the trains running on heritage railways today.

Graham Farish Class 14 D2/9531 NCB British Oak Orange & Black Sound Fitted

Class 14 D2/9531 NCB British Oak Orange & Black - Sound Fitted Features: Locomotive is now Preserved Pristine NCB British Oak Orange & Black livery Running No. D2/9531 Accessory Pack NEM Coupling Pockets Powerful Coreless Motor Speaker Fitted SOUND FITTED - Fitted with a Zimo MS590N18 Sound Decoder Length 72mm - Era 6 - N Scale Affectionately known as the ‘Tedy Bears’, these N scale models cram all of the charm and character of their full size counterparts into a small package and now, for the first time, feature a Next18 DCC decoder socket making it easy to fit a decoder and enjoy these models on DCC. The highly detailed bodyshell is adorned with separately fitted handrails, lamps and other small parts, whilst the prominent footsteps hang from the running plate on both sides. The wasp stripes at either end, expertly applied using specialist printing techniques, make this model unmissable and below them, the bufferbeam can be configured with standard N scale couplings, or with a full depth bufferbeam and a full complement of pipework if standard couplings are not required.  

Graham Farish Class 158 2-Car DMU, 158856 Central Trains (DCC Sound fitted)

Class 158 2-Car DMU, 158856 Central Trains (DCC Sound Fitted) Includes: - Pristine Central Trains livery - Running No. 158856 - Two-Car Unit comprising car Nos. 52856 & 57856 - Destination blinds for Leicester - Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B - Coreless, twin shaft motor with two flywheels providing drive to both bogies of the DMS (A) vehicle - Electrical pickup from all wheels - Working miniature BSI Couplings at the cab ends (alternative air dams are included to allow this feature to work on second radius curves or less) - Designed to operate on curves of second radius (263.5mm) or greater - Separately applied metal detail parts, including exhaust guards and interior luggage racks - Each model is supplied with an accessory pack comprising exhaust pipes and cab end connector door covers (where appropriate)   Detail Variations Specific To This Model: - Radio Pod on Roof - Revised Air Conditioning (Type B) - Toilet Discharge via Coupler Box (Car A Only) - Perkins Engine - Revised Heather - Standard Air Dam - Sanding Gear Fitted - Original Light Cluster - Gangway Doors with Small Windows   Lighting: Directional lighting, including illuminated destination panels, switchable on/off at either end on DCC or Analogue control Cab and saloon interior lighting, switchable on/off via the under-chassis switches Authentic light colours and temperatures selected for each model based on era and application   DCC: Next18 DCC decoder interface – one decoder required per unit Easy-access DCC decoder socket located behind removable panel on underside of DMS (B)   Sound: - Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions SOUND FITTED models operate on DCC and Analogue control as supplied   Livery Application: - Authentic liveries applied to both vehicles including interior decoration - Multiple paint applications employed using BR and corporate specification colours - Logos, numerals and text added as appropriate using multi-stage tampo printing using authentic typefaces, logos and colours  

Graham Farish LMS Ivatt 2MT 46474 BR Lined Black (Early Emblem) Sound Fitted

LMS Ivatt 2MT 46474 BR Lined Black (Early Emblem) - Sound Fitted The popular LMS Ivatt 2MT returns to the Graham Farish N scale range following upgrades to allow SOUND FITTED models to be offered for the first time. With every model now featuring a Next18 DCC decoder interface and pre-fitted speaker, Both upgrades are used to their full potential in this SOUND FITTED model. This Award Winning model certainly packs a punch when it comes to the detail, with separate metal handrails found throughout the locomotive and tender, lubricators and sand boxes along the running plate and separate pipework running from below the cab to the top feed on the boiler. The turned brass safety valves and whistle contrast beautifully with the firebox on which they are mounted, whilst inside the cab, the moulded back head detail has been decorated to pick out the individual gauges and controls. A hinged tender fall-plate provides the finishing touch to the highly impressive cab of this model. When it comes to performance it’s hard not to marvel as you watch the Walschaerts valve gear in motion. The powerful coreless motor provides drive to the centre pair of driving wheels, whilst all six driving wheels are fitted with separate metal bearings and a pair of traction tyres are fitted to the rear driving wheels to aid traction. Electrical pick-up comes via all six driving wheels and all six tender wheels, with a semi-permanent loco-tender coupling system to ensure the two stay firmly coupled at all times. With SOUND FITTED, you can start enjoying authentic sound effects as soon as you place this model on your layout – whether you operate using DCC or Analogue control! MODEL FEATURES: - Pristine BR Lined Black (Early Emblem) livery - Running No. 46474 - Accessory Pack - NEM Coupling Pockets - Powerful Coreless Motor - Loco-drive Mechanism - Tender Pick-ups - Speaker Fitted - SOUND FITTED - Fitted with a Zimo MS590N18 Sound Decoder - Length 112mm - Era 4 - N Scale

Graham Farish LMS Ivatt 2MT 6418 LMS Black Sound Fitted

LMS Ivatt 2MT 6418 LMS Black - Sound Fitted The popular LMS Ivatt 2MT returns to the Graham Farish N scale range following upgrades to include the Next18 DCC decoder interface and a pre-fitted speaker. Both upgrades are used to their full potential in this SOUND FITTED model This Award Winning model certainly packs a punch when it comes to the detail, with separate metal handrails found throughout the locomotive and tender, lubricators and sand boxes along the running plate and separate pipework running from below the cab to the top feed on the boiler. The turned brass safety valves and whistle contrast beautifully with the firebox on which they are mounted, whilst inside the cab, the moulded back head detail has been decorated to pick out the individual gauges and controls. A hinged tender fall-plate provides the finishing touch to the highly impressive cab of this model. When it comes to performance it’s hard not to marvel as you watch the Walschaerts valve gear in motion. The powerful coreless motor provides drive to the centre pair of driving wheels, whilst all six driving wheels are fitted with separate metal bearings and a pair of traction tyres are fitted to the rear driving wheels to aid traction. Electrical pick-up comes via all six driving wheels and all six tender wheels, with a semi-permanent loco-tender coupling system to ensure the two stay firmly coupled at all times. With SOUND FITTED, you can start enjoying authentic sound effects as soon as you place this model on your layout – whether you operate using DCC or Analogue control! MODEL FEATURES: - Pristine LMS Black livery - Running No. 6418 - Accessory Pack - NEM Coupling Pockets  - Powerful Coreless Motor - Loco-drive Mechanism - Tender Pick-ups - Speaker Fitted - SOUND FITTED - Fitted with a Zimo MS590N18 Sound Decoder - Length 112mm - Era 3 - N Scale

Graham Farish The Thanet Flyer SOUND FITTED Train Set

The Thanet Flyer SOUND FITTED Train Set  A Graham Farish Train Set is the perfect entry into the wonderful world of model railways. Each train set includes everything you need to get up and running so why not indulge today and start your journey towards building your own masterpiece in miniature. Arguably most famous for its commuter services, the Southern Railway also transported scores of people from the cities and the suburbs to holiday destinations by the sea, including the idyllic Thanet resorts of Broadstairs, Margate and Ramsgate. Rekindle the joys of summer holidays with this set and take the Thanet Flyer to start your holiday, complete with locomotive and coaches each carrying the vibrant Malachite Green livery with ‘Sunshine’ markings! This SOUND FITTED train set is supplied with a SE&CR N Class Steam Locomotive which is pre-fitted with a Sound Decoder (manufactured by Zimo), allowing the model to produce realistic sounds when placed on the track and with power applied. What’s more, should you wish to replace the analogue controller supplied with this set with a Digital Command Control (DCC) unit, your model is pre-loaded with a full suite of sound effects which can be controlled at the press of a button when used with a DCC system. Includes: - SE&CR N Class 1854 SR Malachite Green livery   - Locomotive features:   - SOUND FITTED   - Metal coal load    - Detail cab and body detailing - SR Bulleid Composite Corridor SR Malachite Green livery - SR Bulleid Brake Third Semi-Open SR Malachite Green livery - Analogue Controller (decorated in black and yellow with Graham Farish logo) - Power Supply - Oval of Track - Power Clip - N Scale

Graham Farish BR Standard 5MT with BR1 Tender 73006 BR Lined Black L/C S/F

BR Standard 5MT with BR1 Tender 73006 BR Lined Black L/C - Sound Fitted The Graham Farish model brings all the power and presence of the prototype to N scale and this masterpiece in miniature certainly packs a punch when it comes to the detail, with separate metal handrails found throughout the locomotive and tender, brass chimney and safety valves and separate pipework running from below the cab to the injectors on the boiler. Inside the cab, the moulded back head detail has been decorated to pick out the individual gauges and controls, whilst below the running plate, the Walschaerts valve gear is something to behold, especially when the locomotive is in motion. A powerful coreless motor provides drive to the centre driving wheels and each driving wheel is fitted with separate metal bearings whilst a pair of traction tyres are fitted to the rear driving wheels to aid traction. Electrical pick-up comes via all six driving wheels and all six tender wheels, with a semi-permanent loco-tender coupling system to ensure the two stay firmly coupled at all times. With SOUND FITTED, you can start enjoying authentic sound effects as soon as you place this model on your layout. FEATURES: Pristine BR Lined Black (Late Crest) livery Running No. 73006 Coupled to a BR1 Tender Accessory Pack NEM Coupling Pockets Powerful Coreless Motor Loco-drive Mechanism Tender Pick-ups Speaker Fitted SOUND FITTED - Fitted with a Zimo MS590N18 Sound Decoder Length 136mm - Era 5 - N Scale

Graham Farish Class 60 60100 'Midland Railway - Butterley' DB Cargo S/Fitted

Class 60 60100 'Midland Railway - Butterley' DB Cargo Sound Fitted   MODEL FEATURES: Pristine DB Cargo livery Running No. 60100 Named ‘Midland Railway - Butterley’ Accessory pack NEM Coupling Pockets Powerful Coreless Motor Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each (*when used on DCC) SOUND FITTED – Fitted with a Zimo MS590N18 Sound Decoder – See below for the function list Length 144mm - Era 9 - N Scale

Graham Farish Class 60 60044 'Ailsa Craig' Mainline Freight Sound Fitted

Class 60 60044 'Ailsa Craig' Mainline Freight Features: Accessory pack NEM Coupling Pockets Powerful Coreless Motor DCC Sound Fitted – Fitted with a Zimo MZ659N18 Sound Decoder Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each (*when used on DCC) - N Scale