Graham Farish LMS 10000 BR Green (Late Crest)

LMS 10000 BR Green (Late Crest) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and now, this pioneering pair is available in N scale as part of the Graham Farish range. Features: Pristine BR Green (Late Crest) livery Running No. 10000 Six Headcode Lights & Brackets at each end Bodyside Steps Water Scoops Fitted Modified Exhaust Panels (with vent grilles) Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 127mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail, including separately fitted metal sand pipes Separately applied underframe and roof detail components Separate lamp irons fitted to each nose Detailed cab interior Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Passenger/Freight mode, switchable on Analogue control and with additional configurations available when used on DCC Cab lighting, switchable on/off (leading end, when used on DCC only) Authentic light colours and temperatures selected for each model based on era and application Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LMS 10000/10001 using recordings from real locomotives - Era 5 - N Scale

Graham Farish LMS 10001 BR Green (Late Crest)

LMS 10001 BR Green (Late Crest) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and now, this pioneering pair is available in N scale as part of the Graham Farish range. Features: Pristine BR Green (Late Crest) livery Running No. 10001 Six Headcode Lights & Brackets at each end Smooth Bodysides (No Steps) Water Scoops Fitted Modified Exhaust Panels (with vent grilles) Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 127mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail, including separately fitted metal sand pipes Separately applied underframe and roof detail components Separate lamp irons fitted to each nose Detailed cab interior Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Passenger/Freight mode, switchable on Analogue control and with additional configurations available when used on DCC Cab lighting, switchable on/off (leading end, when used on DCC only) Authentic light colours and temperatures selected for each model based on era and application Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LMS 10000/10001 using recordings from real locomotives - Era 5 - N Scale

Graham Farish LNER V2 60845 BR Lined Black (Early Emblem) (N)

LNER V2 60845 BR Lined Black (Early Emblem) Some twenty years since the V2 was first produced in N scale by Graham Farish, this all-new model of the LNER Mixed Traffic icon is made to standards not even dreamt of twenty years ago. Often described as ‘the engines that won the war’, these new Graham Farish models are sure to win the heart of any discerning N scale enthusiast. Depicting one of the LNER’s most successful steam locomotive designs, this masterpiece in miniature captures the look and the character of the prototype to a tee. With highly detailed mouldings and many separate parts used on both the locomotive and tender, including era- and prototype-specific detailing to allow accurate models of any given class member throughout their working lives, the performance of these new V2s is just as impressive as their appearance. A powerful coreless motor and flywheel is incorporated into the diecast locomotive chassis, powering the driving wheels which run in separate metal bearings. With electrical pickup from the driving wheels and tender wheels and the option to have traction tyres fitted to one driving wheelset, this new V2 is on a steady footing as soon as it hits the rails. With a Next18 DCC decoder socket and pre-fitted speaker located in the tender, this model is future proofed for those wishing to operate on DCC, with or without sound. What’s more, a SOUND FITTED version is also available providing realistic sound effects on both analogue and DCC straight out of the box! Detail Variations Specific To This Model: Pristine BR Lined Black Early Emblem livery Running No. 60845 Original ‘Monobloc’ Cylinder Casting with Inside Steam Pipes BR Smokebox Door with Numberplate and with Higher Top Lamp Bracket Later Style Rocker Arm Guides Group Standard Tender with High-Front/Low-Rear Coal Space Dividers Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 141mm Coreless motor with flywheel Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Sprung front pony truck Cartazzi truck with flanged wheelset (with side swing for operational necessity) Optional traction tyres fitted to the rear driving wheels (replacement wheelset without traction tyres supplied in the accessory pack) Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front pony truck Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater Speaker installed in the tender of all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LNER V2 Class using recordings from real locomotives - N Scale

Graham Farish LNER V2 4791 LNER Lined Green (Original) (N)

LNER V2 4791 LNER Lined Green (Original)  Some twenty years since the V2 was first produced in N scale by Graham Farish, this all-new model of the LNER Mixed Traffic icon is made to standards not even dreamt of twenty years ago. Often described as ‘the engines that won the war’, these new Graham Farish models are sure to win the heart of any discerning N scale enthusiast. Depicting one of the LNER’s most successful steam locomotive designs, this masterpiece in miniature captures the look and the character of the prototype to a tee. With highly detailed mouldings and many separate parts used on both the locomotive and tender, including era- and prototype-specific detailing to allow accurate models of any given class member throughout their working lives, the performance of these new V2s is just as impressive as their appearance. A powerful coreless motor and flywheel is incorporated into the diecast locomotive chassis, powering the driving wheels which run in separate metal bearings. With electrical pickup from the driving wheels and tender wheels and the option to have traction tyres fitted to one driving wheelset, this new V2 is on a steady footing as soon as it hits the rails. With a Next18 DCC decoder socket and pre-fitted speaker located in the tender, this model is future proofed for those wishing to operate on DCC, with or without sound. What’s more, a SOUND FITTED version is also available providing realistic sound effects on both analogue and DCC straight out of the box! Detail Variations Specific To This Model: Pristine LNER Lined Green (Original) livery Running No. 4791 Original ‘Monobloc’ Cylinder Casting with Inside Steam Pipes LNER Smokebox Door without Numberplate and with Lower Top Lamp Bracket Later Style Rocker Arm Guides Group Standard Tender with High-Front/Low-Rear Coal Space Dividers Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 141mm Coreless motor with flywheel Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Sprung front pony truck Cartazzi truck with flanged wheelset (with side swing for operational necessity) Optional traction tyres fitted to the rear driving wheels (replacement wheelset without traction tyres supplied in the accessory pack) Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front pony truck Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater Speaker installed in the tender of all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LNER V2 Class using recordings from real locomotives - N Scale

Graham Farish LMS 10001 BR Lined Green (Late Crest) 10001

LMS 10001 BR Lined Green (Late Crest) 10001 The Graham Farish model of No. 10001 is a highly detailed masterpiece in miniature, adorned with numerous separately fitted components to accurately capture the appearance of this pioneering machine. The livery application captures the splendour of the prototype, whilst engine room detailing has been replicated through the bodyside windows for the first time. Inside, the proven combination of a coreless motor and twin flywheels, driving both bogies and with all-wheel drive will provide enough power for any prototypical train. The Next18 DCC decoder socket and a pre-fitted speaker make it easy to equip these models for DCC and even add sound, or why not opt for our SOUND FITTED model and enjoy realistic sound effects straight out of the box – whether you’re running on analogue or DCC! Coupled with No. 10000, the LMS Twins will make the perfect addition to any early-BR layout. Features: Pristine BR Lined Green (Late Crest) livery Running No. 10001 Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 127mm Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions - Era 5 - N Scale

Graham Farish LMS Ivatt 2MT 6409 LMS Black

LMS Ivatt 2MT 6409 LMS Black This Award Winning model certainly packs a punch when it comes to the detail, with separate metal handrails found throughout the locomotive and tender, lubricators and sand boxes along the running plate and separate pipework running from below the cab to the top feed on the boiler. The turned brass safety valves and whistle contrast beautifully with the firebox on which they are mounted, whilst inside the cab, the moulded back head detail has been decorated to pick out the individual gauges and controls. A hinged tender fall-plate provides the finishing touch to the highly impressive cab of this model. When it comes to performance it’s hard not to marvel as you watch the Walschaerts valve gear in motion. The powerful coreless motor provides drive to the centre pair of driving wheels, whilst all six driving wheels are fitted with separate metal bearings and a pair of traction tyres are fitted to the rear driving wheels to aid traction. Electrical pick-up comes via all six driving wheels and all six tender wheels, with a semi-permanent loco-tender coupling system to ensure the two stay firmly coupled at all times.  MODEL FEATURES: - Pristine LMS Black livery - Running No. 6409 - Accessory Pack - NEM Coupling Pockets - Powerful Coreless Motor - Loco-drive Mechanism - Tender Pick-ups - Speaker Fitted - Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A - Length 112mm - Era 3 - N Scale IVATT 2MT HISTORY: Designed by H. G. Ivatt for the London, Midland & Scottish Railway (LMS), 128 of these Class 2 Moguls were built for light freight and passenger duties. With construction commencing in 1946, just twenty examples were built by the LMS and the remaining 108 were outshopped by British Railways following Nationalisation in 1948. The construction programme was completed in 1952 and these Mixed Traffic locomotives would go on to operate on all the BR regions, with the exception of the Southern. Light axle loadings allowed the Ivatt 2MTs to be used on most routes including branch lines, where their almost enclosed cabs made them ideal for working tender first when no turning facilities existed. The design provided the basis for the BR Standard Class 2MT 2-6-0, and the two are very similar in appearance, with the Standard version having only a modified cab and tender profile to allow unrestricted route availability across the British network. With BR progressively closing more and more branch lines, and rationalising others – often employing new diesel multiple units to provide a more economical passenger service – duties for small locomotives like the Ivatt 2MTs began to disappear and the decline of the class began in 1961 when the first example was withdrawn. The Mogul’s versatility and its relatively modern design however ensured that many examples were still in traffic until the mid-1960s, but by 1967 all had been withdrawn. Thankfully, seven Ivatt 2MT have been preserved and the type is an ideal source of motive power for many of the trains running on heritage railways today.

Graham Farish LMS Ivatt 2MT 6418 LMS Black

LMS Ivatt 2MT 6418 LMS Black The popular LMS Ivatt 2MT returns to the Graham Farish N scale range following upgrades to allow SOUND FITTED models to be offered for the first time. With every model now featuring a Next18 DCC decoder interface and pre-fitted speaker. This Award Winning model certainly packs a punch when it comes to the detail, with separate metal handrails found throughout the locomotive and tender, lubricators and sand boxes along the running plate and separate pipework running from below the cab to the top feed on the boiler. The turned brass safety valves and whistle contrast beautifully with the firebox on which they are mounted, whilst inside the cab, the moulded back head detail has been decorated to pick out the individual gauges and controls. A hinged tender fall-plate provides the finishing touch to the highly impressive cab of this model. When it comes to performance it’s hard not to marvel as you watch the Walschaerts valve gear in motion. The powerful coreless motor provides drive to the centre pair of driving wheels, whilst all six driving wheels are fitted with separate metal bearings and a pair of traction tyres are fitted to the rear driving wheels to aid traction. Electrical pick-up comes via all six driving wheels and all six tender wheels, with a semi-permanent loco-tender coupling system to ensure the two stay firmly coupled at all times.  MODEL FEATURES: - Pristine LMS Black livery - Running No. 6418 - Accessory Pack - NEM Coupling Pockets - Powerful Coreless Motor - Loco-drive Mechanism - Tender Pick-ups - Speaker Fitted - Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A - Length 112mm - Era 3 - N Scale

Graham Farish LMS Ivatt 2MT 46447 BR Lined Black (Late Crest)

LMS Ivatt 2MT 46447 BR Lined Black (Late Crest) The popular LMS Ivatt 2MT returns to the Graham Farish N scale range following upgrades to allow SOUND FITTED models to be offered for the first time. With every model now featuring a Next18 DCC decoder interface and pre-fitted speaker. This Award Winning model certainly packs a punch when it comes to the detail, with separate metal handrails found throughout the locomotive and tender, lubricators and sand boxes along the running plate and separate pipework running from below the cab to the top feed on the boiler. The turned brass safety valves and whistle contrast beautifully with the firebox on which they are mounted, whilst inside the cab, the moulded back head detail has been decorated to pick out the individual gauges and controls. A hinged tender fall-plate provides the finishing touch to the highly impressive cab of this model. When it comes to performance it’s hard not to marvel as you watch the Walschaerts valve gear in motion. The powerful coreless motor provides drive to the centre pair of driving wheels, whilst all six driving wheels are fitted with separate metal bearings and a pair of traction tyres are fitted to the rear driving wheels to aid traction. Electrical pick-up comes via all six driving wheels and all six tender wheels, with a semi-permanent loco-tender coupling system to ensure the two stay firmly coupled at all times.  MODEL FEATURES: - Locomotive is now Preserved - Pristine BR Lined Black (Late Crest) livery - Running No. 46447 - Accessory Pack - NEM Coupling Pockets - Powerful Coreless Motor - Loco-drive Mechanism - Tender Pick-ups - Speaker Fitted - Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A - Length 112mm - Era 5 - N Scale