DCC Concepts Zen Blue+ Direct 6-pin 2 function

Zen Blue+ Direct 6-pin 2 function Zen decoder software has always been smooth, clever and easy to use but our new decoder range takes this to a new level, with simple-to-use ONE step locomotive set-up and advanced brown-out protection. All of our decoders are tested at least 3 times before we package them for sale, so we know that they all work perfectly when we sell them and you can be quite confident that reliability is assured. DCD-ZN6D.2 replaces the previous version - DCD-ZN6D. Decoder features: 1.1 Amps peak power 750mA continuous power 2 functions at 100mA each 14mm x 9mm x 3.5mm 6-pin direct One-Step Loco Setup  

DCC Concepts Zen 3-Wire Medium Stay Alive for Zen Black & Blue+ Decoders

Zen 3-Wire Medium Stay Alive for Zen Black & Blue+ Decoders A single medium Stay-Alive with 3-wire connections to the decoder. Totally Plug and Play with Zen decoders. Usable with Zen Black, Zen Blue+, Lenz and ESU or any decoder with three-wire connections for Stay-Alive. Please note that connection of a DCCconcepts Zen Stay-Alive to a non-DCCconcepts decoder may invalidate your warranty, please check documentation which came with your decoder for details.

DCC Concepts Zen Black Classic Small Decoder 8-pin harness + ABC module

Zen Black Classic Small Decoder 8-pin harness + ABC module Zen decoder software has always been smooth, clever and easy to use but our new BLACK decoder range takes this to a new level, with extended and improved automatic braking and shuttle abilities, simple-to-use ONE step locomotive set-up and advanced brown-out protection. All of our decoders are tested at least 3 times before we package them for sale, so we know that they all work perfectly when we sell them and you can be quite confident that reliability is assured. This pack includes 1x ABC board to use with automatic braking functionality.   Decoder features: 1.1 Amps peak power 750mA continuous power 4 functions at 100mA each 19mm x 11mm x 6mm 8-pin & harness One-Step Loco Setup Shuttle mode (requires ABC boards for this to function) Stay-Alive connection

DCC Concepts Slim Vertical Mounted Magnetic Sensors (3-pack)

DCC Concepts - Slim Vertical Mounted Magnetic Sensors (3-pack) These detectors have been designed to be very easy to install. Super-slim at only 4mm in diameter, they will fit comfortably between the sleepers of DCCconcepts and Peco Code 100 and Code 75 track as well as most other brands of track in HO. (N scale users will need to temporarily move a sleeper while drilling, but will also find installation quite easy). They are Normally Off and are triggered or turned on by a small magnet that is attached to the loco or rolling stock. While it is always good to use smaller magnets and get the magnet as close as possible to any sensor such as this, we find that even with quite a small magnet we can get reliable results from up to 10mm away. Ideal for all detection and to trigger devices such as Cobalt Point Motors or Alpha. The connector is supplied so that the detectors can be used with our ADiA range of Accessory Decoders. Length of sensor: 15mm Width of sensor: 4mm Length of wire: 300mm Quantity in pack: 3 (Was DCP-TMS) Please note these are Normally Off or Normally Open momentary type connections

DCC Concepts DCC Decoder Convertor 3 Wire to 2 Wire (3)

DCC Decoder Convertor 3 Wire to 2 Wire (3) Pack of three solenoid decoders. The SDC is a clever wee device that takes the outputs from a 3-wire accessory decoder and turns them into a 2-wire reversing DC decoder, allowing you to use most solenoid accessory decoders to power Kato, Cobalt or other brands of point motor. Available in 6 and 12 packs also.

DCC Concepts AE Model 2-Wire High Power Plug & Play Stay-Alive (3-Pack)

AE Model 2-Wire High Power Plug & Play Stay-Alive (3-Pack) Compatible with Hornby TXS (HM7000) decoders (replaces R7377 / HM7070) to give improved performance and connectivity. AE Model 2-Wire Stay Alive for connection to AE Model Decoders including plug-and-play connector.   Dimensions  (individual) 23mm x 17mm x 6mm Cable length = 120mm  

DCC Concepts AE Model 2-Wire High Power Plug & Play Stay-Alive

AE Model 2-Wire High Power Plug & Play Stay-Alive Compatible with Hornby TXS (HM7000) decoders (replaces R7377 / HM7070) to give improved performance and connectivity. AE Model 2-Wire Stay Alive for connection to AE Model Decoders including plug-and-play connector. Dimensions 23mm x 17mm x 6mm Cable length = 120mm    

DCC Concepts DCD-ZNM.HP.6 Zen Black Decoder Midi-Sized 8PIN Harness 6 Fct

DCD-ZNM.HP.6 Zen Black Decoder Midi-Sized 8PIN Harness 6 Fct Includes – 3 Amps peak power– 1.5 Amps continuous RMS power– 6 functions (2x 250mA, 4x 100mA)– Size 30mm x 18.3mm x 6mm– 8-pin harness– One-Step Loco Setup– Shuttle mode (requires ABC boards for this to function)– Brown-Out Protection on-board

DCC Concepts DCD-ZNmini.4 Zen Black Decoder Mini 8Pin

DCD-ZNmini.4 Zen Black Decoder Mini 8Pin Includes – 1.1 Amps peak power– 750mA continuous power– 4 functions at 100mA each– 19mm x 11mm x 6mm– 8-pin & harness– One-Step Loco Setup– Shuttle mode (requires ABC boards for this to function)– Brown-Out Protection on-board– Stay-Alive connection

DCC Concepts DCD-ZBHP.6 Zen Black Buddha Decoder O & Larger Scale

DCD-ZBHP.6 Zen Black Buddha Decoder O & Larger Scale Includes  – 5 Amps peak power– 3 Amps continuous power– 6 functions at 250mA each– On-board high-power stay-alive– 42mm x 27mm x 13mm– 12 screw terminals– One-Step Loco Setup– Shuttle mode (requires ABC boards for this to function)

DCC Concepts DCD-ZN68.2 Zen Blue+Decoder NEM651 6-Pin Direct/ Harness 2 Funct

DCD-ZN68.2 Zen Blue+Decoder NEM651 6-Pin Direct/ Harness 2 Funct Includes - 1.1Amps Peak Power - 750mA Continuous power - 2 Functions at 100mA each - Dimensions 13.5mm x 8.5mm - 6 PIN Direct, 6 PIN Harness and 8 PIN Harness - One step loco setup  

DCC Concepts DCC Decoder Convertor 3 Wire to 2 Wire (3)

DCC Decoder Convertor 3 Wire to 2 Wire (3) - Pack of three solenoid decoders. - The SDC is a clever wee device that takes the outputs from a 3-wire accessory decoder and turns them into a 2-wire reversing DC decoder, allowing you to use most solenoid accessory decoders to power Kato, Cobalt or other brands of point motor. - Please note that for motor drive decoders you will also need to set ‘power on’ time for between 2 and 4 seconds.