Academy Sea Harrier FRS.1 - Royal Navy (1:144)

Sea Harrier FRS.1 - Royal Navy British Royal Navy Sea Harrier FRS.1 V/STOL Strike Fighter. The British Aerospace Sea Harrier FRS.1 (Fighter, Reconnaissance, Strike, Mk 1) entered service with the Fleet Air Arm in 1978 as a unique solution to providing fighter cover from light aircraft carriers. Unlike conventional naval aircraft, the Sea Harrier used vectored-thrust nozzles to achieve short take-offs and vertical landings, removing the need for catapults or arrestor wires. The type’s finest hour came during the Falklands War of 1982. Armed with AIM-9L Sidewinders and equipped with Blue Fox radar for target detection, twenty-eight Sea Harriers from 800, 801, and reformed 809 Naval Air Squadrons deployed on HMS Hermes and HMS Invincible, supported by ten Harrier GR.3s from RAF No. 1 (F) Squadron, provided the UK’s only fleet air defence. Despite early doubts about their limited radar and modest speed, the Sea Harriers proved decisive, achieving twenty confirmed air-to-air kills against Argentine fighters and attack aircraft, without loss in aerial combat. They also flew hundreds of sorties on strike and patrol duties, often in harsh weather and at the limits of their endurance. The Sea Harrier’s effectiveness in the South Atlantic silenced critics and earned it a reputation as one of the most effective and adaptable naval fighters of its era. Its performance was a decisive factor in securing British victory, and the FRS.1 remains forever associated with the Falklands campaign. Reissued Minicraft kit. 2 sprues plus clear parts. Choice of 2 markings: (1) Sea Harrier FRS.1 XZ451, 801 NAS, HMS Invincible, Falklands Conflict 1982; (2) Sea Harrier FRS.1 XZ457, 800 NAS, HMS Hermes, Falklands Conflict 1982. 1:144 scale plastic model kit from Academy, requires paint and glue.

Oxford Diecast JCB 3CX Eco Backhoe Loader JCB (1:76)

JCB 3CX Eco Backhoe Loader JCB (1:76) JCB promote the JCB 3CX Loader as the world's leading backhoe loader behind their JCB 4CX. They boast it as the product of their efficient design philosophy responding to rising fuel prices and environmental concerns. Their innovative technologies have developed a vehicle with class-leading efficiency and low running costs. As they say themselves - squeezing the absolute maximum out of every drop of fuel! As a result, in typical roading, loading, excavating and idle cycles, the 3CX JCB backhoe loader, equipped with a powerful Ecomax engine, delivers an average fuel saving of up to 16%, plus lower emissions and noise levels. As well as the environmental benefits, the JCB 3CX features a brand new engine, more torque than rival vehicles, new electronic engine management system and new powerslide for faster, easier repositioning. The detailed components of the 'real thing' are realistically produced on our Oxford model which appears in the JCB corporate yellow and black colour scheme. The forward body, lifting arms and wheel centres are all yellow with cab, chassis, buckets and interior appearing in black. A flash of colour sees the side piston tubes painted red alongside silver exhaust pipes and headlights. Rounding off this finely engineered vehicle, we see the JCB and 3CX logos printed boldly on the body lifting arms. Let's get digging!

Oxford Diecast Ford Cortina Mk5 - Cosmos Blue (1:76)

Ford Cortina Mk5 - Cosmos Blue (1:76) Our model represents the last in the Ford of Great Britain Cortina series in real life, which dominated the British road scene from the early 1960s to the early 1980s. Ford launched the Mk 5 - an upgraded Mk IV - in August 1979. Marketed as a medium sized family car with prices starting at £3,475, the visible differences included revised headlights incorporating larger indicators, a slatted front grille, a flattened roof, slimmer C-pillars and revised vent cover.  The interior also benefited from detailed changes, including the dashboard and centre console. Improvements were also made to the engine range resulting in better fuel economy and power output. The 2.3-litre V6 engine was given electronic ignition and a slight boost in power output to 116 bhp, compared with the 108 bhp Mark IV. Ford also added improved corrosion protection on Mark V models, which is probably why more have survived. Our 1:76 scale vehicle tooling incorporates the upgraded external features of the real car and is registered FOL 414V from 1979. It is decorated in bright blue with black roof, pillars and window surrounds.  The black finish also extends to the side sills and radiator grille.  The interior is moulded in a rich brown with black trim while a final exterior detail sees the 1.6 GL  printed in silver on the boot lid. Grand Luxury indeed.

Oxford Diecast Ford Anglia - Monaco Red (1:76)

Ford Anglia - Monaco Red (1:76) The Ford Motor Company introduced their fourth generation of the Anglia name, the 105E, in 1959 characterised by its unique backward slanting rear window. When it ceased manufacture in 1967, over 1 million cars had rolled off its Dagenham production line.  It came in various body options and our Oxford’s two-door saloon version is based on what Ford described as a small family car.  It sported a 997 cc engine and was capable of a top speed of 73.8 mph, accelerating from 0-60 in 26.9 seconds. With fuel consumption of 41 miles per gallon, it cost £610 on the road. Here we see this model dressed in a vibrant red colour scheme with a smart white flash along the sides. The interior seating, dashboard and steering wheel are also red. Registered HJN 662D, our model dates back to 1966. A silver trim to the wheels, grille and bumpers also includes a final flourish with the Ford Anglia ‘Deluxe’ signature across the boot.

Oxford Diecast Bedford CF Van - Eastern Gas (1:76)

Bedford CF Van - Eastern Gas (1:76) The Bedford CF small commercial van was first introduced by Bedford - in 1969. It succeeded the  Bedford CA van and was seen as a competitor to rival Ford’s Transit van. It was the last vehicle to be designed solely by Vauxhall and was one of the most popular light commercials of the day due its versatility, which included it being a template for a caravanette, notably the Bedford Dormobile. With longitudinal front engine and rear wheel drive and transmission of 2/4/5 manual to a 3-speed General Moors automatic, the CF Van was given a facelift in 1980, which introduced a 2.3L diesel engine as an alternative to the petrol engine. Our very useful CF Van makes its latest entrance in a 1980s Gas livery, this time as used by the utility company’s Eastern branch. With a white body and royal blue roof and white bonnet, the model has been masked along the sides and rear with royal blue, light blue and aquamarine stripes. The bumpers are also white and the Eastern Gas logo features in white on the cab and rear doors.  Our Gas van is registered MMJ 153P from 1975.

Oxford Diecast Austin 1300 GT - Aqua (1:76)

Austin 1300 GT - Aqua (1:76) BMC unveiled the front engine, front-wheel drive Austin/Morris 1300 GT at the London Motor Show in 1969. Designed by the legendary Alec Issigonis, key features included a 1275 cc twin carburettor engine, a black full width grille, black vinyl roof and a thick black metal strip along the side, all designed to convey a sporty image. In 1971 the Mark III version appeared, lasting in production until 1974 when the range was superseded by the Austin Allegro and the Vanden Plas 1500. A popular model in our Oxford 1:76 series, this colour scheme on the Austin 1300 GT is a delightful watery shade of blue with black roof and lots of silver masking. Registered RVB 740L from 1972, our 1:76 scale replica sports a steel blue interior with black dashboard and steering wheel. Further details include the Austin name is printed at the top of the black and silver radiator grille, with its GT status is printed in red on the grille and also behind the rear side windows. The boot lid carries the 1300 GT marque to the right of the rear registration plate.

Corgi James Bond 007 'On Her Majesty's Secret Service' AstonMartin DBS

James Bond 007 'On Her Majesty's Secret Service' Aston Martin DBS  The first new Aston Martin driven by James Bond since the debut of the DB5 is the Aston Martin DBS in On Her Majesty’s Secret Service. Other than a telescopic rifle concealed in the glove compartment, this car is gadget free. Designed and built as the successor to the Aston Martin DB6, the DBS was introduced in 1967. While deviating from the more classic look of previous Aston Martin cars, the DBS featured trademark design aspects such as the bonnet scoop, wire wheels, and side air vents with a stainless-steel bridge that were synonymous with earlier vehicles from the manufacturer.  Though this incarnation of the DBS was retired in 1972, the name has since been resurrected twice by Aston Martin on a model produced between 2007 and 2012, and a brand-new incarnation that is available now. - 1:36 Scale

Corgi Ford Cortina Mk5 2.0 Ghia S Sirius Red (1:43)

Ford Cortina Mk5 2.0 Ghia S Sirius Red (1:43) The Cortina modelled was ordered by Harry Cooper, the MD of a Derbyshire-based joinery firm, and built in Germany in late 1979. It was supplied by Hanger Ford, Wellford Road, Leicester, on 14th February 1980, and aside from being finished in a rare colour that was only offered for a short time, it is unusual in that he ordered every available option.  These included a sump guard, remote boot release, cruise control and economy lights embedded in the speedometer. Mr Cooper sold it when it was almost five years old, and its second owner kept it for twenty-five years, asking the supplying dealer to fit a Type-9 5-speed Sierra gearbox early in his tenure. By 2009, it had covered 120,000 miles and was purchased by South Wales-based enthusiast Alan Downs for £1,000. He initially used it daily before deciding to restore this uniquely specified car. He stripped it completely and was pleased to find it only needed one new front wing, before having it resprayed.  He fitted as many Ford new old stock parts as possible, powder-coated numerous components, and returned it to the road in spring 2012. It won several prizes at Ford shows but a change in his family circumstances led to its purchase by Ford enthusiast Bruce DiMario from Dorset, in 2013. He rebuilt the noisy back axle before selling the now perfect car to longstanding North Wales-based Ford collector Ian Mills, in May 2014.

Peco Wallace & Gromit Aardman 50th Wagon Collectors set (009)

Wallace & Gromit Aardman 50th Wagon Collectors set (009) Celebrate two very special anniversaries with PECO and Aardman. Marking 80 years of PECO and 50 years of Aardman, this exclusive OO-9 Collectors' Set brings together five ready-to-run box vans inspired by the wonderful world of Wallace & Gromit. The set features four characterful liveries inspired by the world of Wallace & Gromit, alongside an exclusive Aardman 50th Anniversary wagon created especially for the 50 Years of Clay celebrations. The five ready-to-run box vans feature: Preston's Dog Food Bake-O-Lite Top Bun Wash 'N' Go Aardman 50th Anniversary – exclusive to the Collectors' Set The set also includes an illustrated commemorative booklet and a set of six collectors' postcards, making it a particularly special release for both model railway enthusiasts and Wallace & Gromit fans. With two much-loved British names celebrating landmark anniversaries, this is a rather cracking collection to add to the layout or keep as a piece of PECO and Aardman memorabilia.

Peco Wallace & Gromit Bako Lite Box Van (009)

Wallace & Gromit Bako Lite Box Van (009) A Cracking OO-9 Scale Model Railway Van This ready-to-run OO-9 box van features the distinctive Bake-O-Lite livery from the world of Wallace & Gromit. Part of PECO’s exclusive Wallace & Gromit collection, the four-wheel van celebrates 50 Years of Clay from Aardman alongside PECO’s 80th anniversary. With its colourful finish and familiar branding, it makes a distinctive addition to the OO-9 range.

Peco Wallace & Gromit Preston's Dogfood Box Van (009)

Wallace & Gromit Preston's Dogfood Box Van (009) A Cracking OO-9 Scale Model Railway Van This ready-to-run OO-9 box van features the distinctive Preston’s Dog Food livery from the world of Wallace & Gromit. Part of PECO’s exclusive Wallace & Gromit collection, the four-wheel van celebrates 50 Years of Clay from Aardman alongside PECO’s 80th anniversary. A colourful addition to the OO-9 range, bringing a little of the world of Wallace & Gromit to the railway.

Peco Wallace & Gromit Wash'n'Go Box van (009)

Wallace & Gromit Wash'n'Go Box van (009) A Cracking OO-9 Scale Model Railway Van Something rather familiar has found its way onto the railway. This ready-to-run OO-9 box van features the distinctive Wash ’N’ Go livery from the world of Wallace & Gromit. The four-wheel van forms part of PECO’s exclusive collection celebrating 50 Years of Clay from Aardman alongside PECO’s 80th anniversary. A colourful and characterful addition to the OO-9 range.

Peco Wallace And gromit TOP BUN bakery Box Van (009)

Wallace And Gromit TOP BUN bakery Box Van (009) A Cracking OO-9 Scale Model Railway Van There’s always room for a good bun on the railway. This ready-to-run OO-9 box van features the distinctive Top Bun livery, bringing another familiar detail from the world of Wallace & Gromit to the rails. Part of PECO’s exclusive collection, the four-wheel van celebrates 50 Years of Clay from Aardman alongside PECO’s 80th anniversary. A colourful addition to the OO-9 range, with a little Wallace & Gromit charm.

Revell Handley Page Halifax B Mk.III "Friday The 13th" LV907 (1:72)

Handley Page Halifax B Mk.III  Model makers have waited a long time, now the moment has come: For the first time since 2015, Revell is releasing the Handley Page Halifax B Mk.III. This kit is considered to be the only modern tool of this famous British bomber on the current market. With an impressive wingspan of almost 44 cm in a scale of 1:72, this model is a real heavyweight. It offers a level of detail and fit that befits the historical significance of this Royal Air Force workhorse. Along with the famous Lancaster, the Handley Page Halifax was the Royal Air Force's most important heavy bomber in World War II. Over 6,000 examples were built. The Mk.III version featured the more powerful Bristol Hercules radial engines, giving it better performance and higher chances of survival. It was the backbone of Bomber Command and made a decisive contribution to the Allied air offensive. The kit contains two new, high-quality decal versions for a British (RAF) and an Australian (RAAF) aircraft. The RAF Example is LV907 "Friday The 13th" as "Preserved" at the Yorkshire Air Museum at Elvington! With 257 parts and level 5, this bomber is a wonderful challenge for experienced modelers aged 13 and over. - 1:72 Scale

Peco Planksided Vanfit Bile Beans Leeds No.2 (N) (MBMS Excl)

Planksided Vanfit - Bile Beans (Leeds) No.2 (N) - MBMS Exclusive

Peco Planksided Vanfit Bile Beans Twin Pack (N) (MBMS Excl)

Planksided Vanfit - Bile Beans Twin Pack No.1 & No.2 (N) (MBMS Excl) - MBMS Exclusive

Scenecraft Fibre Board Hut (N)

Fibre Board Hut The lineside was once full of huts like this Fibre Board Hut which provided permanent way workers with a place to rest and shelter from the elements. Nowadays, some can still be found in various states of disrepair and often they are out of use or overrun with vegetation. MODEL FEATURES: Highly detailed, hand painted model Fully decorated and ready to place on your layout - N Scale

Scenecraft Corrugated Metal Shed (N)

Corrugated Metal Shed Corrugated Metal Sheds are a common sight in any location where storage is required, allowing this versatile model to be placed lineside and in yards, or away from the railway where it would be equally well suited next to allotments, in gardens, or several other places on your layout. MODEL FEATURES: Highly detailed, hand painted model Fully decorated and ready to place on your layout Etched metal window frames with realistic glazing - making it perfect for use with Woodland Scenics JustPlug lighting! - N Scale

Scenecraft Grit Boxes (x4) (OO)

Grit Boxes (x4) fully finished and ready to place on your layout. Grit Boxes are found roadside across the UK and particularly in hilly areas where snow and ice might cause havoc and so these innocuous boxes sit loaded with grit and waiting to help. MODEL FEATURES: Highly detailed, hand painted model Fully decorated and ready to place on your layout Pack of 4 - OO scale

Scenecraft Fibre Board Hut (OO)

Fibre Board Hut The lineside was once full of huts like this Fibre Board Hut which provided permanent way workers with a place to rest and shelter from the elements. Nowadays, some can still be found in various states of disrepair and often out of use or overrun with vegetation. MODEL FEATURES: Highly detailed, hand painted model Fully decorated and ready to place on your layout   - OO scale

Rapido UK Dropside Open Plain Brown No.12 (OO-9)

Dropside Open Plain Brown No.12 (OO-9) 009 Dropside Open Plain Brown No.12 Metal Wheels NEM coupler pockets with 009 ?Hook and Loop? couplings High level of detail above and below the floor line High quality livery application 1:76 scale, (009 gauge) UK designed

Rapido UK Dropside Open Plain Grey No.3 (OO-9)

Dropside Open Plain Grey No.3 (OO-9) 009 Dropside Open Plain Grey No.3 Metal Wheels NEM coupler pockets with 009 ?Hook and Loop? couplings High level of detail above and below the floor line High quality livery application 1:76 scale, (009 gauge) UK designed

Tamiya Morris Mini Cooper Racing (1:24)

Morris Mini Cooper Racing Introduced in 1959, the Morris Mini rewrote the rules for small cars, pairing a brilliantly compact body with an impressively spacious interior. Then came the Mini Cooper: tuned by Formula One legend John Cooper and ready to turn everyday agility into track-ready excitement. Its 1,275 cc 4-cylinder engine with twin carburetors delivered 75 hp and a top speed of 155 km/h, while front disc brakes and revised suspension helped make every corner count. In the 1960s, the Mini Cooper became a racing favorite, using its nimble handling and unmistakable go-kart spirit to claim countless victories and class titles in series including the British Saloon Car Championship and the European Touring Car Championship. This 1/24 scale plastic model assembly kit celebrates the Morris Mini Cooper Racing with compact confidence and competition attitude. Length: 129 mm, width: 66 mm, height: 56 mm.  ★The purposeful racing form, including overfenders and bonnet catches, is captured with dynamic MINI flair.  ★The model features detailed depictions of the 4-cylinder engine and auxiliary equipment.  ★The interior includes the dashboard, door pockets and roll bar.  ★8-spoke Cooper wheels are paired with solid synthetic rubber tires.  ★Decals are included for car numbers, body-side stripes and more. - Plastic Kit Requires Glue & Paints to Complete - 1:24 Scale

Corgi Me 410A-1/U3, Hpt. Eduard Tratt, II./ZG26 1943 (1:72)

Me 410A-1/U3, Hauptmann Eduard Tratt, II./ZG26 1943 (1:72) Product Info: This impressive CORGI Aviation Archive 1:72 scale diecast model brings the formidable Messerschmitt Me 410A-1/U3 Hornisse to life for passionate collectors and aviation enthusiasts.  Ready to display straight from the box, this meticulously crafted model captures the powerful twin-engine heavy fighter in authentic markings commemorating Hauptmann Eduard Tratt, the most successful Zerstörer Ace of the Second World War.  Finished in accurate grey livery with rotating propellers, this detailed replica represents one of the Luftwaffe's most heavily armed interceptors from 1943. Key Features: Ready to display straight from the box - no assembly required Authentic 1:72 scale diecast construction Rotating propellers for added realism Accurate grey paint scheme and period markings Includes display stand History: Despite a troubled development that delayed its entry into service, the Messerschmitt Me 410 Hornisse emerged as an exceptional combat aircraft, combining considerable power with impressive operational range and devastating firepower.  The Hornisse could mount an extraordinary array of weaponry, its configurable under-nose weapons bay supplemented by external armaments made it particularly lethal against the massive Allied bomber streams that penetrated deep into German

Corgi Fokker E.III Eindecker, E339/16, Lt. Josef Jacobs, 1916 (1:48)

This exceptional CORGI Aviation Archive 1:48 scale diecast model honours one of the Great War's most dedicated fighter pilots, Josef Jacobs, and his distinctive Fokker E.III Eindecker.  Ready to display straight from the box, this meticulously crafted collectible captures the essence of early aerial combat with authentic detailing and premium construction.  Perfect for collectors of WWI aviation history and enthusiasts of pioneering fighter aircraft.   Key Features: Ready to display - no assembly required Authentic 1:48 scale diecast construction Rotatable propeller for dynamic presentation Historically accurate markings of Lt. Josef Jacobs' E339/16 Includes display stand Premium tan finish with precise detail work History: Josef Jacobs' journey from teenage aviation enthusiast to legendary fighter ace represents one of the most remarkable careers of the Great War. Learning to fly at just eighteen in 1912, he began the conflict as a motorcycle dispatch rider before his natural aptitude saw him transition to aerial reconnaissance.    His studious nature and exceptional skill caught the attention of senior pilots, earning him a coveted position at the newly formed Fokkerstaffel West, where he became one of the world's first dedicated fighter pilots flying the revolutionary Fokker Eindecker series.   Jacobs spent longer in operational flying over the Western Front trenches than any other German pilot, facing every major Allied ace of the period. His distinguished career saw him eventually command Jagdstaffel 22, where he mastered the iconic Fokker Dr.1 triplane, achieving an unprecedented 30 victories in this aircraft alone, more than any other pilot.    This Eindecker release perfectly complements the earlier Aviation Archive Fokker Dr.1 featuring Jacobs' distinctive black triplane.By war's end, Jacobs had secured 48 confirmed victories, placing him joint quarter among German aces alongside Werner Voss, and earning him the prestigious Pour le Mérite, the legendary 'Blue Max'. His legacy endures as a testament to skill, dedication and the dawn of aerial warfare.  

Hornby HM7000: Power Bank Maxi

HM7000: Power Bank Maxi The R7416 Power Bank Maxi is our largest power bank and will keep locomotives with larger motors that require more pulling power, running over any potential dead spots. The space require inside a locomotive for this power bank is 22 x 12 x 10mm.  The Power Bank Maxi can be connected into the current range of HM7000 DCC Bluetooth decoders. A simple plug & play socket means there's no soldering required! Why use one? Your layout will occasionally suffer from dirty track or small electrical dead spots at points and crossings. The small loss of power can cause locomotives to stop, but with DCC Sound Decoders it can also cause the sounds to reset and restart. Avoid both issues by fitting a Power Bank. Perfect locomotive running and optimal control! (The Power Bank is not suitable for use without an HM7000 decoder, connecting it directly to other decoders or directly to the wiring of a model locomotive may cause damage to the Power Bank, your locomotive or your non-HM7000 decoder). For small locomotives we have a smaller Power Bank available R7377 Power Bank

Hornby BR Tavern Coach Pack ‘At the Sign of the Dolphin’

BR Tavern Coach Pack ‘At the Sign of the Dolphin’ This expertly detailed and colourful Southern Region Tavern Car twin pack offers modellers a unique set of restaurant cars, which feature intricate paint and print application, crisply moulded details, and interior lighting. This latest release includes Tavern Car No. S7894 and Composite Saloon No. S7835, and both are decorated in Crimson & Cream livery and named ‘At the Sign of the Dolphin’. Model Specification: Highly detailed models of KB and RCO Tavern Cars Defined bogie mouldings Detailed roof mouldings Separately fitted underframe and gangway end equipment Moulded interior Interior Lighting Kinematic NEM coupling mechanism Accessory Pack Tooling: Original condition Tavern Car without side beading Original condition Composite Saloon with high windows and without side beading Livery: BR Crimson & Cream Faux-pub exterior painted on Tavern Car Accurate colours and fonts - OO Scale  

Hornby LNER A4 60002 ‘Sir Murrough Wilson' BR Green (Sound/Smoke)

LNER A4 60002 ‘Sir Murrough Wilson' BR Green (Sound/Smoke) The famous LNER A4 pacific, known for its streamlined casing, returns to the range as No. 60002 ‘Sir Murrough Wilson’ fitted with steam generator and DCC Sound functionality, as well as working lights and tender lights. This gorgeous Gresley locomotive is highly detailed, featuring a great number of intricate separate parts, and would make for a standout addition to any early British Railways model railway collection. Please Note: This model requires a DCC controller or the HM7000 App to control. Model Specification: High detail OO gauge model based on extensive research and original works drawings Die-cast chassis and boiler Die-cast connecting rods and valve gear High detail cab and fully decorated back head with decorated instrument dials Decorated crew figures Turned brass safety valves Large number of separately fitted parts Separately fitted simulated coal load with fully detailed tender bunker Powerful 5 pole skew wound motor Electrical pickups on main drive wheels and tender wheels Quick release locomotive to tender connector Pogo pin wheel pickup arrangement for easy pickup servicing Brass main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Working lights  Working Tender Lights Accessory bag contains tablet catcher, vacuum pipes, lamps and couplings Minimum 2nd Radius curves Steam Generator: Pre-fitted Gen 2 steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Water reservoir large enough for 20 minutes of continuous steam running Adjustable steam output settings via the decoder Electronics: Pre-fitted 21-Pin HM7000 decoder and speaker. Compatible with NMRA DCC controllers and HM7000 system HM7000 Power Bank compatible Flickering firebox DCC Sound: Pre-installed LNER A4 sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect. Assembled using live recordings of LNER A4 locomotives Tender speaker Tooling: Smokebox door numberplate Single Chimney Non-Corridor Tender Side valence removed Livery: BR Lined Green Named ‘Sir Murrough Wilson’ Cycling Lion on tender Accurate colours and fonts - OO Scale

Hornby LNER A4 60024 'Kingfisher' BR Exp. Ultramarine (Sound/Smoke)

LNER A4 60024 'Kingfisher' BR Experimental Ultramarine (Sound/Smoke) The famous LNER A4 pacific, known for its streamlined casing, returns to the range as No. 60024 ‘Kingfisher’ fitted with steam generator and DCC Sound functionality, as well as working lights and tender lights.  This gorgeous Gresley locomotive is highly detailed, featuring a great number of intricate separate parts, and would make for a standout addition to any LNER model railway collection. Please Note: This model requires a DCC controller or the HM7000 App to control. Model Specification: High detail OO gauge model based on extensive research and original works drawings Die-cast chassis and boiler Die-cast connecting rods and valve gear High detail cab and fully decorated back head with decorated instrument dials Decorated crew figures Turned brass safety valves Large number of separately fitted parts Separately fitted simulated coal load with fully detailed tender bunker Powerful 5 pole skew wound motor Electrical pickups on main drive wheels and tender wheels Quick release locomotive to tender connector Pogo pin wheel pickup arrangement for easy pickup servicing Brass main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Working lights  Working Tender Lights Accessory bag contains tablet catcher, vacuum pipes, lamps and couplings Minimum 2nd Radius curves Steam Generator: Pre-fitted Gen 2 steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Water reservoir large enough for 20 minutes of continuous steam running Adjustable steam output settings via the decoder Electronics: Pre-fitted 21-Pin HM7000 decoder and speaker. Compatible with NMRA DCC controllers and HM7000 system HM7000 Power Bank compatible Flickering firebox DCC Sound: Pre-installed LNER A4 sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect. Assembled using live recordings of LNER A4 locomotives Tender speaker Tooling: Smokebox door numberplate Single Chimney Corridor Tender Side valence removed Livery: BR Express Blue Named ‘Kingfisher’ British Railways lettering on tender Accurate colours and fonts - OO Scale

Hornby Playtrains: Signal Box

Playtrains: Signal Box Add another layer of imagination to their railway adventures with this signal box, created especially for Hornby Playtrains. An ideal structure for bringing your child’s train set to life, this classic signal box gives every journey a sense of purpose and storytelling.  Children aged 5–8 will love imagining the railway controller inside, deciding when trains can depart, when they must stop, changing the points and keeping everything running smoothly. Made from robust plastic and supplied in a simple kit form, it’s easy to assemble and designed to stand up to enthusiastic everyday play.  The realistic colours add an authentic touch to their Playtrains railway play set-up, helping to create a miniature railway world that feels both fun and believable. Fully compatible with all Hornby Playtrains toys, it’s a simple way to expand their set, encourage creative role play and keep their railway adventures on track.  

Oxford Diecast Mercedes Whitby Mondial Ice Cream Van Tonibell (1:76)

Mercedes Whitby Mondial Ice Cream Van Tonibell You’ve been treated to this exact same model in 1:43 scale; this issue reveals it joining the 1:148 series too; and now it appears again, especially for 1:76 scale ice cream van followers. It is such a delightful and eye-catching vehicle which is as irresistible as the ice cream!  The frothy bright pink body with black trim is just covered with a mass of pastel shades including the signature Tonibell cow, with her famous bell collar, as she appears on all sides of the van.  Ice cream cones top the front of the roof and the side hatch promotes all the delicious varieties on offer. The Whitby Company set up business in 1962 and acquired the Morrison Industries Electrofreeze company in 1989, to be morphed into Whitby Morrison Mondial. Their worldwide market in ice cream vans spans over 50 countries, all from their Cheshire base, which is still family owned. The sight and sound of an ice cream van always heralds the UK summer and the latest introduction is a sure sign of the season to come! - OO/1:76 Scale

Oxford Diecast Ford Transit Beavertail Recovery 24hr Recovery (1:76)

Ford Transit Beavertail Recovery 24hr Recovery The Ford Motor Company introduced the Ford Transit commercial ‘family’ of vehicles in 1965.  And the brand is still going strong today, having evolved physically and mechanically along the way with numerous configurations and uses.  The Transit name itself has become a generic term for small commercial vehicles and here at Oxford Diecast, we have kept up with all the changes to shapes and uses along the way. Our latest introduction is the simple Ford Transit recovery/breakdown version which features a two-door Ford Transit cab and long trailer, designed especially for rescuing vehicles from the roadside It is registered FCR 238L from  1971 so it is quite early in the Ford Transit’s evolution.  Painted completely in white, the graphics clearly state in red and orange its 24 hour recovery facility. The exterior trim is black apart from the platform which is silver. The interior is also black. An additional tooling modification comprises a pyramid style roof box with an orange beacon above the cab. Add your own 1:76 scale ‘rescued’ vehicle to the platform for added realism. - OO/1:76 Scale

Oxford Diecast Burrell Scenic Showmans Loco Winston Churchill (1:76)

Burrell Scenic Showmans Loco Winston Churchill As countrywide fairs and steam rallies roll in for the summer season, it is a wonderful opportunity to take another trip down memory lane with Oxford’s Showmans series. Our new release on the Burrell Scenic Loco is absolutely splendid too. The colourful steam locomotive started its real life in 1922, commissioned by Holland Bros. It was designed with a longer boiler and an electric dynamo, especially for powering fairground use. It was delivered to them to power Albert Holland’s Peacock and Dragon Scenic Ride. The locomotive was originally named Prince Albert which was changed in preservation to Winston Churchill. Around 1952, the late Eric Middleton bought the locomotive directly from the Hollands in Swadlincote, Derbyshire for about £250. Having lain derelict and abandoned for some years, the locomotive was in very bad condition. However, Eric restored the engine completely and sold it to the Hardwick family who rallied it extensively in the 1980s. It is now owned by the Marchington family.  The 1:76 scale model appears in crimson with a white roof and black masking. Dropped shadow lettering along the edge of the roof promote the Holland’s Golden Dragons; the Winston Churchill nameplate features in gold and red on the locomotive side.  Also in red and gold, the front of the boiler carries the customary C Burrell & Sons Engineers Ltd name and The “Burrell Road Locomotive” lettering. It is estimated that each of the Oxford Showmans series models requires at least 100 printing operations and it is easy to see why.  There is illustrious decoration and colour throughout, resulting in another desirable steam locomotive to light up your fairground diorama. - OO/1:76 Scale

Oxford Diecast Bedford CF Hanlon Ambulance Merseyside Ambulance Service (1:76)

Bedford CF Hanlon Ambulance Merseyside Ambulance Service The Bedford CF was a range of full size commercial vans produced by Bedford, the commercial division of Vauxhall, between 1969 and 1986, when it represented the last vehicle produced solely by Vauxhall. It was a very versatile model – a competitor to the Ford Transit – and was adapted widely due to its space and reliability. It was a particular favourite when configured as an ambulance with conversions being undertaken by specialised coach builders, including the Irish company Hanlon.  Such ambulances had coachbuilt bodies to accommodate the necessary headroom and interior capacity for patients and equipment. The Oxford Diecast Bedford CF Hanlon Ambulance is registered B575 LKA, the year in which the CF featured modernised engines and transmission options. Our 1:76 scale replica is based on the vehicle used by the Merseyside Metropolitan Ambulance Service and appears in white with the red Day-Glo stripe running round the sides and across the rear doors. Black printing on the cab doors indicates the ambulance served Stockport and further exterior trim is finished in black or chrome while additional detail to the front radiator grille sees two blue lights between the chrome headlights.  The roof also has an air horn/siren painted red and two blue roof beacons. The side and rear windows have a blacked out effect surrounded by chrome.  And - on this model - note the single wheels on the rear chassis. - OO/1:76 Scale

Oxford Diecast Grumann Avenger White 83 USS Petrof Bay 1945 (1:72)

Grumann Avenger White 83 USS Petrof Bay 1945 The Grumman Avenger was the British version of the American TBF-1 Avenger and the RAF used these under a lend-lease agreement.  However, our latest release is an Avenger that served with the US forces towards the end of WWII in combat with the Japanese in the Pacific. It was classed as a naval aircraft torpedo bomber and our 1:72 scale Grumman is a replica of the bomber flying with 76 Squadron from the aircraft carrier USS Petrof Bay. It comprised a single engine monoplane with capacity for up to a four-man crew. The livery on this model is quite striking with its midnight blue and dark sea grey two-tone upper side and white underbody.  Graphics are in white, including a four leaf clover on the tail fin. The nose art features a provocative and colourful ‘Blopsy’. The Grumman’s offensive armament comprised two forward facing Browning machine guns and a further rear-facing defensive Browning machine gun in the turret.  These are faithfully reproduced on our model painted black.  Finite details also include the black propellers with their yellow tips, the rust finished exhaust pipes and the silver propeller hub/spinner. - 1:72 Scale

Rapido UK GWR O21 4 Plank Open Barry Railway Red Oxide No.10

GWR O21 4 Plank Open Barry Railway Red Oxide No.10 Barry Railway Red Oxide No. 10 Oil axleboxes Single-sided brakes, 2 brake shoes Sheet supporter rail in detail bag Spoked wheels running in metal bearings NEM coupler pockets 1:76 scale, (OO gauge) UK designed

Rapido UK GWR O21 4 Plank Open GWR Grey (23” lettering) No.45503

GWR O21 4 Plank Open GWR Grey (23” lettering) No.45503 GWR Grey (23” lettering) No. 45503 Oil axleboxes Single-sided brakes, 2 brake shoes Sheet supporter rail in detail bag Spoked wheels running in metal bearings NEM coupler pockets 1:76 scale, (OO gauge) UK designed

Rapido UK GWR O21 4 Plank Open GWR Grey (23” lettering) No.54548

GWR O21 4 Plank Open GWR Grey (23” lettering) No.54548 GWR Grey (23” lettering) No. 54548 Oil axleboxes Double-sided brakes, 3 brake shoes Sheet supporter rail in detail bag Spoked wheels running in metal bearings NEM coupler pockets 1:76 scale, (OO gauge) UK designed

Rapido UK GWR O21 4 Plank Open GWR Grey (23” lettering) No.62488

GWR O21 4 Plank Open GWR Grey (23” lettering) No.62488 GWR Grey (23” lettering) No. 62488 Grease axleboxes Single-sided brakes, 2 brake shoes Spoked wheels running in metal bearings NEM coupler pockets 1:76 scale, (OO gauge) UK designed

Rapido UK GWR O21 4 Plank Open GWR Red No.44600

GWR O21 4 Plank Open GWR Red No.44600 GWR Red (LHS GWR Lettering) No. 44600 Grease axleboxes Single-sided brakes, 2 brake shoes Spoked wheels running in metal bearings NEM coupler pockets 1:76 scale, (OO gauge) UK designed

Rapido UK GWR O21 4 Plank Open GWR Red No.52198

GWR O21 4 Plank Open GWR Red No.52198 GWR Red (RHS GWR Lettering) No. 52198 Grease axleboxes Single-sided brakes, 2 brake shoes Spoked wheels running in metal bearings NEM coupler pockets 1:76 scale, (OO gauge) UK designed

Rapido UK GWR O21 4 Plank Open GWR Red No.632

GWR O21 4 Plank Open GWR Red No.632 GWR Red (number plates) No. 632 Oil axleboxes Single-sided brakes, 2 brake shoes Etched plates included in detail bag Spoked wheels running in metal bearings NEM coupler pockets 1:76 scale, (OO gauge) UK designed

Rapido UK RCH 1907 Salt Van Shaka Salt Stafford No.166

RCH 1907 Salt Van Shaka Salt Stafford No.166 RCH 1907 Spec Peaked-Roof Salt Van Shaka Salt No. 166 Salt van with peaked roof RCH split oil axleboxes Twin-sided brakes Angled V hangers Ribbed buffers Split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale (OO gauge) UK designed

Rapido UK RCH 1907 Salt Van Snowdrift Salt Stafford Common No.306

RCH 1907 Salt Van Snowdrift Salt Stafford Common No.306 RCH 1907 Spec Peaked-Roof Salt Van Snowdrift Salt No. 306 Salt van with peaked roof Round-bottom grease axleboxes Twin-sided brakes Angled V hangers Ribbed buffers Split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale (OO gauge) UK designed

Rapido UK RCH 1907 Salt Van Stafford Salt Works No.C.25

RCH 1907 Salt Van Stafford Salt Works No.C.25 RCH 1907 Spec Peaked-Roof Salt Van Stafford Salt Works No. C.25 Salt van with peaked roof RCH split oil axleboxes Twin-sided brakes Angled V hangers Ribbed buffers Split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale (OO gauge) UK designed

Rapido UK RCH 1907 Salt Van Stubbs & Co Stafford No.37

RCH 1907 Salt Van Stubbs & Co Stafford No.37 RCH 1907 Spec Peaked-Roof Salt Van Stubbs & Co No. 37 Salt van with peaked roof Round-bottom grease axleboxes Single-sided brakes Angled V hangers Plain tapered buffers Split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale (OO gauge) UK designed  

Rapido UK RCH 1907 Salt Van Chance & Hunt Ltd. No.333

RCH 1907 Salt Van Chance & Hunt Ltd. No.333 RCH 1907 Spec Peaked-Roof Salt Van Chance & Hunt Ltd. No. 333 Salt van with peaked roof Round-bottom grease axleboxes Twin-sided brakes Angled V hangers Plain tapered buffers Split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale (OO gauge) UK designed

Rapido UK RCH 1907 Salt Van Falk Salt Salt Union Ltd. Cheshire No.2521

RCH 1907 Salt Van Falk Salt Salt Union Ltd. Cheshire No.2521 RCH 1907 Spec Peaked-Roof Salt Van Falk Salt No. 2521 Salt van with peaked roof Square grease axleboxes Twin-sided brakes Angled V hangers Plain tapered buffers Split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale (OO gauge) UK designed

Rapido UK RCH 1907 Salt Van ICI Salt No.2553

RCH 1907 Salt Van ICI Salt No.2553 RCH 1907 Spec Peaked-Roof Salt Van ICI Salt No. 2553 Salt van with peaked roof RCH split oil axleboxes Twin-sided brakes Angled V hangers Plain tapered buffers Split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale (OO gauge) UK designed

Rapido UK RCH 1907 Salt Van Imperial Chemical Industries Ltd. No.11

RCH 1907 Salt Van Imperial Chemical Industries Ltd. Fleetwood Salt No.11 RCH 1907 Spec Peaked-Roof Salt Van Imperial Chemical Industries ? Fleetwood Salt No. 11 Salt van with peaked roof Round-bottom grease axleboxes Single-sided brakes Angled V hangers Plain tapered buffers Split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale (OO gauge) UK designed

Rapido UK RCH 1907 Salt Van Manger’s Salt Stafford Common No.121

RCH 1907 Salt Van Manger’s Salt Stafford Common No.121 RCH 1907 Spec Peaked-Roof Salt Van Manger’s Salt No. 121 Salt van with peaked roof Ellis grease axleboxes Twin-sided brakes Angled V hangers Ribbed buffers Split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale (OO gauge) UK designed

Rapido UK RCH 1907 Salt Van Manger’s Salt Stafford, Lymm & London No.147

RCH 1907 Salt Van Manger’s Salt Stafford, Lymm & London No.147 RCH 1907 Spec Peaked-Roof Salt Van Manger?s Salt No. 147 Salt van with peaked roof Round-bottom grease axleboxes Twin-sided brakes Angled V hangers Plain tapered buffers Split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale (OO gauge) UK designed

Rapido UK RCH 1907 Salt Van Saxa Salt Middlewich No.217

RCH 1907 Salt Van Saxa Salt Middlewich No.217 RCH 1907 Spec Peaked-Roof Salt Van Saxa Salt No. 217 Salt van with peaked roof RCH split oil axleboxes Twin-sided brakes Angled V hangers Ribbed buffers Split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale (OO gauge) UK designed

Rapido UK RCH 1907 Salt Van Saxa Salt Middlewich No.218

RCH 1907 Salt Van Saxa Salt Middlewich No.218 RCH 1907 Spec Peaked-Roof Salt Van Saxa Salt No. 218 Salt van with peaked roof RCH split oil axleboxes Single-sided brakes Angled V hangers Ribbed buffers Split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale (OO gauge) UK designed

Rapido UK RCH 1907 Salt Van Shaka Salt Stafford No.119

RCH 1907 Salt Van Shaka Salt Stafford No.119 RCH 1907 Spec Peaked-Roof Salt Van Shaka Salt No. 119 Salt van with peaked roof Ellis grease axleboxes Twin-sided brakes Angled V hangers Ribbed buffers Split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale (OO gauge) UK designed

Rapido UK RCH 1907 Salt Van A. Cant & Sons Canning Town No.18

RCH 1907 Salt Van A. Cant & Sons Canning Town No.18 RCH 1907 Spec Peaked-Roof Salt Van A. Cant & Sons No. 18 Salt van with peaked roof RCH split oil axleboxes Twin-sided brakes Angled V hangers Ribbed buffers Split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale (OO gauge) UK designed

Rapido UK RCH 1907 Salt Van Chance & Hunt Ltd. No.171

RCH 1907 Salt Van Chance & Hunt Ltd. No.171 RCH 1907 Spec Peaked-Roof Salt Van Chance & Hunt Ltd. No. 171 Salt van with peaked roof Oil 116 axleboxes Single-sided brakes Angled V hangers Plain tapered buffers Split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale (OO gauge) UK designed

Rapido UK Not Quite Mink’ G.Fawkes Westminster No.1605

Not Quite Mink’ G.Fawkes Westminster No.1605 Not-quite-mink G. FAWKES No. 1605 Oil axleboxes Plated-over end vents Double-sided brakes, 4 brake shoes GPV doors Spoked wheels running in metal bearings NEM coupler pockets 1:76 scale, (OO gauge) UK designed

Rapido UK Not Quite Mink’ LMS Grey Gunpowder/Acid No.240251

Not Quite Mink’ LMS Grey Gunpowder/Acid No.240251 Not-quite-mink LMS Grey No. 240251 Oil axleboxes Plated-over end vents Double-sided brakes, 4 brake shoes GPV doors Spoked wheels running in metal bearings NEM coupler pockets 1:76 scale, (OO gauge) UK designed

Rapido UK Not Quite Mink’ Midland Railway Grey No.109985

Not Quite Mink’ Midland Railway Grey No.109985 Not-quite-mink Midland Railway Grey No. 109985 Oil axleboxes Plated-over end vents Double-sided brakes, 3 brake shoes GPV doors Spoked wheels running in metal bearings NEM coupler pockets 1:76 scale, (OO gauge) UK designed

Rapido UK Not Quite Mink’ G.Fawkes Westminster No.1105

Not Quite Mink’ G.Fawkes Westminster No.1105 Not-quite-mink G. FAWKES No. 1105 Grease axleboxes Plated-over end vents Double-sided brakes, 3 brake shoes GPV doors Spoked wheels running in metal bearings NEM coupler pockets 1:76 scale, (OO gauge) UK designed

Rapido UK Not Quite Mink’ Blue Circle Portland Cement Yellow No.177

Not Quite Mink’ Blue Circle Portland Cement Yellow No.177 Not-quite-mink Blue Circle Yellow No. 177 Oil axleboxes Short end vents Double-sided brakes, 4 brake shoes Mink doors Spoked wheels running in metal bearings NEM coupler pockets 1:76 scale, (OO gauge) UK designed

Rapido UK Not Quite Mink’ BR (Southern) Brown No.61204

Not Quite Mink’ BR (Southern) Brown No.61204 Not-quite-mink BR(S) Brown No. 61204 Oil axleboxes Plated-over end vents Single-sided brakes, 2 brake shoes GPV doors Spoked wheels running in metal bearings NEM coupler pockets 1:76 scale, (OO gauge) UK designed

Rapido UK Not Quite Mink’ Caledonian Railway Red No.57

Not Quite Mink’ Caledonian Railway Red No.57 Not-quite-mink Caledonian Railway Red No. 57 Oil axleboxes Plated-over end vents Double-sided brakes, 2 brake shoes GPV doors Spoked wheels running in metal bearings NEM coupler pockets 1:76 scale, (OO gauge) UK designed

Rapido UK Not Quite Mink’ D.Fews Explosives No.2264

Not Quite Mink’ D.Fews Explosives No.2264 Not-quite-mink D. FEWS Explosives No. 2264 Grease axleboxes Plated-over end vents Double-sided brakes, 3 brake shoes GPV doors Spoked wheels running in metal bearings NEM coupler pockets 1:76 scale, (OO gauge) UK designed

Rapido UK Not Quite Mink’ Ferrocrete Yellow Portland No.252

Not Quite Mink’ Ferrocrete Yellow Portland No.252 Not-quite-mink Ferrocrete Yellow No. 252 Oil axleboxes Short end vents Double-sided brakes, 4 brake shoes Mink doors Spoked wheels running in metal bearings NEM coupler pockets 1:76 scale, (OO gauge) UK designed

Rapido UK GWR 'Iron Mink' GWR Grey (25″ Numbers) No.11258

GWR 'Iron Mink' GWR Grey (25″ Numbers) No.11258 Iron Mink GWR Grey (number plates) No. 11258 Oil axleboxes Long end vents Single-sided brakes, 2 brake shoes Mink doors Etched plates included in detail bag Spoked wheels running in metal bearings NEM coupler pockets 1:76 scale, (OO gauge) UK designed

Rapido UK GWR 'Iron Mink' GWR Grey (25″ Numbers) No.57586

GWR 'Iron Mink' GWR Grey (25″ Numbers) No.57586 Iron Mink GWR Grey No. 57586 Grease axleboxes Long end vents Single-sided brakes, 2 brake shoes Mink doors Spoked wheels running in metal bearings NEM coupler pockets 1:76 scale, (OO gauge) UK designed

Rapido UK GWR 'Iron Mink' GWR Red No.37666

GWR 'Iron Mink' GWR Red No.37666 Iron Mink GWR Red (LHS GWR Lettering) No. 37666 Grease axleboxes Long end vents Single-sided brakes, 2 brake shoes Mink doors Spoked wheels running in metal bearings NEM coupler pockets 1:76 scale, (OO gauge) UK designed

Rapido UK GWR 'Iron Mink' GWR Red No.57604

GWR 'Iron Mink' GWR Red No.57604 Iron Mink GWR Red (RHS GWR Lettering) No. 57604 Grease axleboxes Long end vents Single-sided brakes, 2 brake shoes Mink doors Spoked wheels running in metal bearings NEM coupler pockets 1:76 scale, (OO gauge) UK designed

Rapido UK GWR 'Iron Mink' GWR Red No.69303

GWR 'Iron Mink' GWR Red No.69303 Iron Mink GWR Red (RHS GWR Lettering) No. 69303 Oil axleboxes Long end vents Single-sided brakes, 2 brake shoes Mink doors Spoked wheels running in metal bearings NEM coupler pockets 1:76 scale, (OO gauge) UK designed

Italeri OA-4M Skyhawk (1:72)

OA-4M Skyhawk The Douglas A-4 Skyhawk was developed in the 1950s and became one of the most famous and widely used light attack aircraft in the history of aviation. It was characterized by a simple design, with low-mounted delta wings and small side air intakes, yet it was extremely functional for operational use. Derived as an evolution of the original layout, the OA-4M Skyhawk is a two-seat light attack and advanced training version designed to meet the operational needs of the United States Marine Corps. Developed by McDonnell Douglas in the 1970s, the OA-4M was created to operate alongside single-seat variants in tactical support, reconnaissance, and pilot operational training missions. Significantly upgraded in avionics compared to previous versions, the OA-4M was capable of employing a broader and more advanced variety of weapon systems. - 1:72 Scale

Italeri Messerschmitt Me 323 Gigant (1:72)

Messerschmitt Me 323 Gigant  The Me-323 “Gigant” was one of the largest transport aircraft built during the Second World War. It was developed to meet the specific requirement of the Luftwaffe, following the extension of supply lines, to transport troops and materials over long distances. Initially developed from a glider, it was equipped with six radial engines mounted on the wing leading edge, capable of providing sufficient power for fully loaded flight operations. The enormous fuselage was able to carry troops—more than 120 men—supplies, artillery pieces, and light vehicles. Its great transport capacity compromised its maximum speed, which only slightly exceeded 240 km/h. It was employed on the North African and Tunisian fronts to supply the Afrika Korps from bases in Sicily, as well as on the Russian front. It is considered a milestone in transport aircraft history. - 1:72 Scale

Bachmann LNER 12T Ventilated Fruit Van BR Bauxite (Early)

LNER 12T Ventilated Fruit Van BR Bauxite (Early) Britain’s railways were developed primarily to move freight and the early railway companies employed vans of many different designs to transport goods and merchandise that required covered transport. Each railway company had its own designs, some of which were intended for specific traffic like this Fruit Van built by the London and North Eastern Railway (LNER). The fruit vans sported louvres at each end and ventilators on the roof to allow fresh air to circulate within, keeping fruit fresh during its journey. This Branchline models depicts one of those wooden bodied vans and the planked body is replicated with fine engraving, with precision moulding to capture every detail of the sliding doors and their mechanism, topped off with a separately fitted metal door handle. On the roof, the six ventilators are each moulded in full relief before being added individually, the central pair being offset as per the prototype. The chassis employs metal wheelsets of the 3-hole disc variety around which safety loops are added from formed metal wire, whilst the brakes, brake handles and associated gear is all included. Representing a van fitted with vacuum brakes, the brake cylinder is mounted underneath the wagon and brake pipes are fitted to each bufferbeam alongside metal buffer heads cosmetic coupling hooks. MODEL FEATURES: Bachmann Branchline OO Scale Era 4 Pristine BR Bauxite (Early) livery Running No. E222078 NEM Coupling Pockets Length 90mm (over couplings)

Bachmann LNER 12T Ventilated Fruit Van BR Bauxite (Late)

LNER 12T Ventilated Fruit Van BR Bauxite (Late) Britain’s railways were developed primarily to move freight and the early railway companies employed vans of many different designs to transport goods and merchandise that required covered transport. Each railway company had its own designs, some of which were intended for specific traffic like this Fruit Van built by the London and North Eastern Railway (LNER). The fruit vans sported louvres at each end and ventilators on the roof to allow fresh air to circulate within, keeping fruit fresh during its journey. This Branchline models depicts one of those wooden bodied vans and the planked body is replicated with fine engraving, with precision moulding to capture every detail of the sliding doors and their mechanism, topped off with a separately fitted metal door handle. On the roof, the six ventilators are each moulded in full relief before being added individually, the central pair being offset as per the prototype. The chassis employs metal wheelsets of the 3-hole disc variety around which safety loops are added from formed metal wire, whilst the brakes, brake handles and associated gear is all included. Representing a van fitted with vacuum brakes, the brake cylinder is mounted underneath the wagon and brake pipes are fitted to each bufferbeam alongside metal buffer heads cosmetic coupling hooks. MODEL FEATURES: Bachmann Branchline OO Scale Era 5 Pristine BR Bauxite (Late) livery Running No. E222476 Lettered ‘VANFIT’ NEM Coupling Pockets Length 90mm (over couplings)

Bachmann BR 12T Ventilated Van Plywood Sides BR Bauxite (TOPS)

BR 12T Ventilated Van Plywood Sides BR Bauxite (TOPS) British Railways (BR) inherited a wide range of rolling stock upon Nationalisation in 1948, much of which was aging or in need of modern replacement and so a programme to build new vehicles soon commenced. These new vehicles were built to a variety of standardised designs and the 12 Ton Ventilated Van, which was used to transport general merchandise, was one of the most numerous types of freight vehicle built by BR. Employing a metal chassis, the van was constructed from corrugated metal ends with a ventilator in each, with a metal body frame which was panelled with wooden planks or plywood sheets. The Bachmann Branchline model is a faithful replica of the humble 12T Van, using a precision moulded body that accurately captures the corrugated ends and smooth plywood sides, along with finer details like the body framing, door hinges and locking mechanisms. The roof includes the characteristic rain strips above each set of double doors and the rivets securing the roof are neatly moulded at either end. The chassis is similarly detailed, being fitted with separate brake gear, brake handles and vacuum cylinders, complete with the linkage between the two ‘V’ hangers. Metal wheels and axles are employed, along with turned metal buffers; meanwhile the couplings are fitted via NEM coupling pockets allowing full interchangeability for those wishing to use an alternative coupling system. MODEL FEATURES: Bachmann Branchline OO Scale Era 7 Pristine BR Bauxite (TOPS) livery Running No. B769573 TOPS Code VVV NEM Coupling Pockets Length 88mm (over couplings)

Bachmann BR 12T Ventilated Van Plywood Sides BR Dept. Olive w/Chevrons

BR 12T Ventilated Van Plywood Sides BR Dept. Olive w/Chevrons British Railways (BR) inherited a wide range of rolling stock upon Nationalisation in 1948, much of which was aging or in need of modern replacement and so a programme to build new vehicles soon commenced. These new vehicles were built to a variety of standardised designs and the 12 Ton Ventilated Van, which was used to transport general merchandise, was one of the most numerous types of freight vehicle built by BR. Employing a metal chassis, the van was constructed from corrugated metal ends with a ventilator in each, with a metal body frame which was panelled with wooden planks or plywood sheets. The Bachmann Branchline model is a faithful replica of the humble 12T Van, using a precision moulded body that accurately captures the corrugated ends and smooth plywood sides, along with finer details like the body framing, door hinges and locking mechanisms. The roof includes the characteristic rain strips above each set of double doors and the rivets securing the roof are neatly moulded at either end. The chassis is similarly detailed, being fitted with separate brake gear, brake handles and vacuum cylinders, complete with the linkage between the two ‘V’ hangers. Metal wheels and axles are employed, along with turned metal buffers; meanwhile the couplings are fitted via NEM coupling pockets allowing full interchangeability for those wishing to use an alternative coupling system. MODEL FEATURES: Bachmann Branchline OO Scale Era 7 Pristine BR Departmental Olive Green with Chevrons livery Running No. ADB786510 TOPS Code ZRV NEM Coupling Pockets Length 88mm (over couplings)

Bachmann BR 12T Ventilated Van Plywood Sides BR Bauxite (Early)

BR 12T Ventilated Van Plywood Sides BR Bauxite (Early) British Railways (BR) inherited a wide range of rolling stock upon Nationalisation in 1948, much of which was aging or in need of modern replacement and so a programme to build new vehicles soon commenced. These new vehicles were built to a variety of standardised designs and the 12 Ton Ventilated Van, which was used to transport general merchandise, was one of the most numerous types of freight vehicle built by BR. Employing a metal chassis, the van was constructed from corrugated metal ends with a ventilator in each, with a metal body frame which was panelled with wooden planks or plywood sheets. The Bachmann Branchline model is a faithful replica of the humble 12T Van, using a precision moulded body that accurately captures the corrugated ends and smooth plywood sides, along with finer details like the body framing, door hinges and locking mechanisms. The roof includes the characteristic rain strips above each set of double doors and the rivets securing the roof are neatly moulded at either end. The chassis is similarly detailed, being fitted with separate brake gear, brake handles and vacuum cylinders, complete with the linkage between the two ‘V’ hangers. Metal wheels and axles are employed, along with turned metal buffers; meanwhile the couplings are fitted via NEM coupling pockets allowing full interchangeability for those wishing to use an alternative coupling system. MODEL FEATURES: Bachmann Branchline OO Scale Era 4 Pristine BR Bauxite (Early) livery Running No. B775484 NEM Coupling Pockets Length 88mm (over couplings)

EFE Daimler Fleetline DMS Brighton Corporation 91 Trainer (1:76)

Daimler Fleetline DMS Brighton Corporation 91 Driver Trainer The Daimler Fleetline DMS had its origins in a nationwide move towards One-Man Operation (OMO) buses in the late 1960s and early 1970s, replacing the tried-and-tested ‘driver and conductor’ crews that had been the staple for many years. London Transport (LT) was no exception, and as such began to explore the benefits that OMO might bring by trialling Leyland Atlanteans and Daimler Fleetlines. It was the latter that would go on to form the basis of an all-new London bus – the DMS. The first of the new DMSs entered service in January 1971 working on Routes 95 and 220. They were powered by Gardner 6LXB engines and bodied by Park Royal Vehicles, with full OMO considerations included. Passengers would enter through a set of double folding doors at the front, opposite the driver, and immediately pass through an Automatic Fare-Collection (AFC) turnstile (located over the nearside front wheel arch) to gain access to the seating. Exit was via a second set of doors located centrally on the nearside of the body. Building on the popularity of the ‘Routemaster’ tag, London Transport named the new type the ‘Londoner’, but it never caught on, and they were simply referred to as Fleetlines or DMSs. A total of 2,646 would be built between 1970 and 1978; the design evolving during that time, culminating in the B20 type. However, the DMS was never popular with passengers owing to the slower boarding times caused by the AFC equipment, and they proved equally unpopular with garage staff, so much so that the first started to be withdrawn the year after the last was delivered. Our new models represent those built in the first batch, identified by the narrower position of the headlights. This example represents the former DMS132 in its post-London guise as Brighton Corporation No. 91. This vehicle was acquired to serve as a driver trainer, and for many years could be seen around the south coast resort as a mobile recruitment advert. It survives today with the Bromley Bus Preservation Group. The new models are based on EFE Road’s updated Daimler Fleetline DMS tooling and feature the early style front end for the first time on an EFE DMS model. • Colours/details of final model may vary from illustration • Authentically detailed die-cast model from EFE Road • Complementary to OO scale model railways (1:76 scale)

EFE Daimler Fleetline DMS115 London Transport Route 170 (1:76)

Daimler Fleetline DMS115 London Transport Route 170 Aldwych The Daimler Fleetline DMS had its origins in a nationwide move towards One-Man Operation (OMO) buses in the late 1960s and early 1970s, replacing the tried-and-tested ‘driver and conductor’ crews that had been the staple for many years. London Transport (LT) was no exception, and as such began to explore the benefits that OMO might bring by trialling Leyland Atlanteans and Daimler Fleetlines. It was the latter that would go on to form the basis of an all-new London bus – the DMS. The first of the new DMSs entered service in January 1971 working on Routes 95 and 220. They were powered by Gardner 6LXB engines and bodied by Park Royal Vehicles, with full OMO considerations included. Passengers would enter through a set of double folding doors at the front, opposite the driver, and immediately pass through an Automatic Fare-Collection (AFC) turnstile (located over the nearside front wheel arch) to gain access to the seating. Exit was via a second set of doors located centrally on the nearside of the body. Building on the popularity of the ‘Routemaster’ tag, London Transport named the new type the ‘Londoner’, but it never caught on, and they were simply referred to as Fleetlines or DMSs. A total of 2,646 would be built between 1970 and 1978; the design evolving during that time, culminating in the B20 type. However, the DMS was never popular with passengers owing to the slower boarding times caused by the AFC equipment, and they proved equally unpopular with garage staff, so much so that the first started to be withdrawn the year after the last was delivered. Our new models represent those built in the first batch, identified by the narrower position of the headlights. This example is DMS115, which is presented in its original condition, as working on Route 170 to Aldwych circa 1971. As prototypical at the time it sports the ‘open’ style of LT roundel, and is complete with the coin in slot emblems on the front end and PAY AS YOU ENTER notifications. The new models are based on EFE Road’s updated Daimler Fleetline DMS tooling and feature the early style front end for the first time on an EFE DMS model. • Colours/details of final model may vary from illustration • Authentically detailed die-cast model from EFE Road • Complementary to OO scale model railways (1:76 scale)

EFE Daimler Fleetline DMS141 London Transport Route 46 (1:76)

Daimler Fleetline DMS141 London Transport Route 46 Farringdon Street The Daimler Fleetline DMS had its origins in a nationwide move towards One-Man Operation (OMO) buses in the late 1960s and early 1970s, replacing the tried-and-tested ‘driver and conductor’ crews that had been the staple for many years. London Transport (LT) was no exception, and as such began to explore the benefits that OMO might bring by trialling Leyland Atlanteans and Daimler Fleetlines. It was the latter that would go on to form the basis of an all-new London bus – the DMS. The first of the new DMSs entered service in January 1971 working on Routes 95 and 220. They were powered by Gardner 6LXB engines and bodied by Park Royal Vehicles, with full OMO considerations included. Passengers would enter through a set of double folding doors at the front, opposite the driver, and immediately pass through an Automatic Fare-Collection (AFC) turnstile (located over the nearside front wheel arch) to gain access to the seating. Exit was via a second set of doors located centrally on the nearside of the body. Building on the popularity of the ‘Routemaster’ tag, London Transport named the new type the ‘Londoner’, but it never caught on, and they were simply referred to as Fleetlines or DMSs. A total of 2,646 would be built between 1970 and 1978; the design evolving during that time, culminating in the B20 type. However, the DMS was never popular with passengers owing to the slower boarding times caused by the AFC equipment, and they proved equally unpopular with garage staff, so much so that the first started to be withdrawn the year after the last was delivered. Our new models represent those built in the first batch, identified by the narrower position of the headlights. This example is Abbey District’s DMS141, depicted in its early 1980s condition as working on Route 46 to Farringdon Street, complete with highly visible yellow front entrance doors. The new models are based on EFE Road’s updated Daimler Fleetline DMS tooling and feature the early style front end for the first time on an EFE DMS model. • Colours/details of final model may vary from illustration • Authentically detailed die-cast model from EFE Road • Complementary to OO scale model railways (1:76 scale)

EFE Daimler Fleetline DMS146 London Transport Route 267 (1:76)

Daimler Fleetline DMS146 London Transport Route 267 Hampton Court Stn The Daimler Fleetline DMS had its origins in a nationwide move towards One-Man Operation (OMO) buses in the late 1960s and early 1970s, replacing the tried-and-tested ‘driver and conductor’ crews that had been the staple for many years. London Transport (LT) was no exception, and as such began to explore the benefits that OMO might bring by trialling Leyland Atlanteans and Daimler Fleetlines. It was the latter that would go on to form the basis of an all-new London bus – the DMS. The first of the new DMSs entered service in January 1971 working on Routes 95 and 220. They were powered by Gardner 6LXB engines and bodied by Park Royal Vehicles, with full OMO considerations included. Passengers would enter through a set of double folding doors at the front, opposite the driver, and immediately pass through an Automatic Fare-Collection (AFC) turnstile (located over the nearside front wheel arch) to gain access to the seating. Exit was via a second set of doors located centrally on the nearside of the body. Building on the popularity of the ‘Routemaster’ tag, London Transport named the new type the ‘Londoner’, but it never caught on, and they were simply referred to as Fleetlines or DMSs. A total of 2,646 would be built between 1970 and 1978; the design evolving during that time, culminating in the B20 type. However, the DMS was never popular with passengers owing to the slower boarding times caused by the AFC equipment, and they proved equally unpopular with garage staff, so much so that the first started to be withdrawn the year after the last was delivered. Our new models represent those built in the first batch, identified by the narrower position of the headlights. This example is DMS146, another ‘open’ rondel DMS, but this time carrying the white band applied to later examples in this batch, which helped break up the wall of red. The model is depicted as working a Route 267 service to Hampton Court Station. The new models are based on EFE Road’s updated Daimler Fleetline DMS tooling and feature the early style front end for the first time on an EFE DMS model. • Colours/details of final model may vary from illustration • Authentically detailed die-cast model from EFE Road • Complementary to OO scale model railways (1:76 scale)

EFE Daimler Fleetline DMS46 London Transport Route 95 (1:76)

Daimler Fleetline DMS46 London Transport Route 95 Cannon Street The Daimler Fleetline DMS had its origins in a nationwide move towards One-Man Operation (OMO) buses in the late 1960s and early 1970s, replacing the tried-and-tested ‘driver and conductor’ crews that had been the staple for many years. London Transport (LT) was no exception, and as such began to explore the benefits that OMO might bring by trialling Leyland Atlanteans and Daimler Fleetlines. It was the latter that would go on to form the basis of an all-new London bus – the DMS. The first of the new DMSs entered service in January 1971 working on Routes 95 and 220. They were powered by Gardner 6LXB engines and bodied by Park Royal Vehicles, with full OMO considerations included. Passengers would enter through a set of double folding doors at the front, opposite the driver, and immediately pass through an Automatic Fare-Collection (AFC) turnstile (located over the nearside front wheel arch) to gain access to the seating. Exit was via a second set of doors located centrally on the nearside of the body. Building on the popularity of the ‘Routemaster’ tag, London Transport named the new type the ‘Londoner’, but it never caught on, and they were simply referred to as Fleetlines or DMSs. A total of 2,646 would be built between 1970 and 1978; the design evolving during that time, culminating in the B20 type. However, the DMS was never popular with passengers owing to the slower boarding times caused by the AFC equipment, and they proved equally unpopular with garage staff, so much so that the first started to be withdrawn the year after the last was delivered. Our new models represent those built in the first batch, identified by the narrower position of the headlights. This example is DMS46, which in 1974 was the first example to receive the white window surrounds on the upper deck, creating a very pleasing appearance. Our model depicts it as working around 1976 on Route 95 with a Cannon Street destination. The new models are based on EFE Road’s updated Daimler Fleetline DMS tooling and feature the early style front end for the first time on an EFE DMS model. • Colours/details of final model may vary from illustration • Authentically detailed die-cast model from EFE Road • Complementary to OO scale model railways (1:76 scale)

EFE Dennis Dart SLF/Pointer 2 Dennis the Menace 75th Anniv (1:76)

Dennis Dart SLF/Pointer 2 Dennis the Menace 75th Anniversary Special 2026 celebrates 75 years since that most beloved of comic book characters, Dennis the Menace, made his first appearance in the Beano. Since that 1951 debut, Dennis and his loyal canine sidekick, Gnasher, have delighted generations of children (and adults) with their tales of mischief and mayhem, and to mark this significant milestone, the Beano and its publisher, D C Thomson, have declared 2026 to be a ‘Year of Mischief’! To commemorate the anniversary, EFE Road has teamed up with Beano Studios and D C Thomson to create a special 75th Anniversary bus, and what better bus to use as a basis than a Dennis Dart SLF/Pointer 2! This unique and fully licensed collectors piece features authentic Dennis the Menace and Gnasher artworks, and is complete with an appropriate service 75 destination serving Bash Street School and Beanotown. These limited edition ‘Dennis on a Dennis’ Darts will be arriving with Bachmann stockists later this year. Note: This model is not based on a ‘real’ prototype and is a fictitious livery created for the anniversary. • Colours/details of final model may vary from illustration • Authentically detailed die-cast model from EFE Road • Complementary to OO scale model railways (1:76 scale)

Hornby Country Cottage (TT)

Country Cottage  The TT:120 scale range of scenic items gains its first residential building in this year's April announcements, in the form of the charming Country Cottage.  Typical of a dwelling nestled along a country lane, this half render/half brick cottage is highly detailed, comes pre-painted, and is fitted with separate glazed windows and gutter piping. It would be well suited for a number of TT layout styles, regardless of time period or location. - TT:120 Scale

Hornby LNER A1 4472 'Flying Scotsman' LNER Apple Green (TT)

TT3004M LNER Class A1 4-6-2 4472 'Flying Scotsman' The A1 is a locomotive that will always be tied to the names Sir Nigel Gresley and LNER, however only one of these was involved in the design and construction from the beginning. The A1 was originally a Great Northern Railway design, with number 1470 ‘Great Northern’ being one of only two examples to outshop into GNR service. These locomotives were powerful, and almost immediately served their purpose of comfortably outperforming the older ‘Atlantic’ locomotives that were being pushed to their limit between London and the North. These ‘Pacific’ locomotives did just that, and they would go on to become one of the most versatile locomotives in Britain. Upon amalgamation onto the LNER, some minor changes were made to the Class, but being a recent design at the time they were already close to the pinnacle of what could be achieved by any locomotive designer, let alone Sir Nigel Gresley. 4472 is a number that is engrained into the brain of every man who was once a little boy staring starry eyed and an Apple Green streak thundering though the countryside. ‘Flying Scotsman’ was built in 1923 as one of the A1 locomotives built under the LNER, it is the only member of the class to go on to be preserved. The trials and tribulations faced by Flying Scotsman in preservation have cemented its status as one of the most famous steam locomotives ever built. - TT:120 Scale

Bachmann MR 3835 (4F) w/ Johnson-Deeley Tender 3850 LMS Black

MR 3835 (4F) w/ Johnson-Deeley Tender 3850 LMS Black The 4Fs were simple yet beautiful machines and the Branchline model pays homage to that with high fidelity mouldings for the main components like the smokebox, boiler, firebox and cab, which are all mounted on a diecast metal running plate. Countless separate detailing parts are then added like the metal handrails, turned brass safety valves, lamp irons and lubricators. Sprung metal buffers are fitted to both bufferbeams. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. This attention to detail extends to the tender, while the tender drawbar is adjustable to suit individual layout conditions and electrical connections are incorporated into the drawbar. Look inside the cab and you will find a sublime level of detail; the boiler backhead boasts an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. A poseable fallplate is fitted to the rear of the cab to complete the look. The Branchline 4F runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine LMS Black livery Running No. 3850 Johnson-Deeley Tender Tall Chimney with Capuchon Ramsbottom Safety Valves Fluted Connecting Rods Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 221mm (over couplings) OO Scale 

Tamiya Yamaha RZV500R (1:12)

Yamaha RZV500R Tamiya welcomes an updated re-issue of Item 14037 1/12 Yamaha RZV500R (sold in 2011 last time) with a newly added B5-size double-sided pamphlet with colour photos of the full-size bike for painting reference and updated instruction manuals. The Yamaha RZV500R was announced at the Tokyo Motor Show 1983 with specs that basically made it equivalent to the road racer YZR500. Inheriting its lightweight, compact design from the YZR, the RZV featured a 500cc 2-stroke water-cooled V4 engine capable of 64hp and 230km/h top speed, which provided performance on the level of a litre-class motorcycle. The RZV500R opened up a new era of 2-stroke sports bikes and was invested with Yamaha’s significant know-how of both 2-stroke engines and racing. Features: This is a 1/12 scale plastic model assembly kit. Length: 172mm, width: 56mm, height: 97mm Includes a newly added B5-size double-sided pamphlet with colour photos for painting reference Comes with an updated 4-language instruction manual and cover story (previously only 2-language) Features realistic depictions of details such as a 500cc 2-stroke water-cooled V4 engine, SU carburettors, air cleaner and chambers The Yamaha Monocross suspension at rear is authentically depicted with a metal spring 1.6mm screw heads are changed to + shape, so small screwdriver is included Comes with solid depictions of 16-inch front and 18-inch rear tyres High-quality Cartograf decals are included

Hornby BR Class 50 D403 BR Blue (TT)

BR Class 50 D403 BR Blue  The latest 'Hoover' to the TT:120 range is the BR Class D403. Featuring a five-pole motor, directional and cab lighting, die-cast chassis and highly detailed bodyshell, the illustrious Class 50 will make an mpressive addition to your TT:120 fleet. This model depicts pre-TOPS numbered D403 in all-over BR Blue with small cab side BR Double Arrows and headcode panels. Model Specification: Highly detailed model based on extensive research including 3D scanning and original works drawings Heavy die-cast chassis and underframe, giving an overall weight of 195g Powerful five-pole skew-wound motor with dual flywheels Dual bogie drive with a total of 12 driving wheels Brass axle bearings All wheel electrical pickup Front and rear kinematic NEM coupling system Die-cast metal buffers Separately fitted metal steps, grills and handrails Accessory bag contains optional fit snow ploughs, vacuum pipes and couplings Electronics: Directional lighting Cab interior lighting (requires DCC to operate) Separately controllable taillights (requires DCC to operate) Next-18 Decoder socket compatible with HM7000 system Space for HM7000-N18TXS Sound Decoder to be fitted Space for HM7070 Power Bank for uninterrupted running Tooling: Original headcode box Original boiler port Flush nose ends Livery: BR Blue with cab side double arrows Pre-Tops number Unnamed - TT:120 Scale

Hornby BR Class 30 D5502 BR Green (Sound Fitted) (TT)

BR Class 30 D5502 BR Green (Sound Fitted) Hornby are delighted to present the newest addition to the TT:120 diesel locomotive family: the Brush Type 2 Class 30 and 31. This brand-new, highly detailed tooling covers the extensive history of the ‘Gargoyles’: from skinhead examples from the late 50s, to modern Class 31s retrofitted with high intensity lights and NRN roof pods. This exciting new range of Type 2s will be available in either DCC Ready or Sound Fitted format. TT3071TXSM is DCC Sound Fitted and depicts Class 30 D5502 in BR Green with duck egg blue stripes. Model Specification: Highly detailed model based on extensive research and design Die-cast chassis Wealth of separately fitted parts, including front end handrails, disc headcodes (where applicable) and roof grille Detailed cab interior Powerful five-pole motor providing power to all wheels Electrical pick-ups on all wheels Pivoting NEM coupling sockets Accessory pack that includes optional buffer beam pipes Minimum 2nd radius curves Electronics: Space for HM7070 Power Bank for uninterrupted running Sound: Utilises high-fidelity HM7000 sound file Chassis-mounted speaker Tooling: Indicator headcode discs 'Skinhead’ roof Toffee Apple cab style Mirrlees exhaust Side steps Oil filler Water filler Open boiler port Without door louvres Livery: BR Green with duck egg stripes Later British Railways crests Authentic livery colours and font types Semi-gloss finish - TT:120 Scale

Hornby BR Class 30 D5502 BR Green (TT)

BR Class 30 D5502 BR Green w/ Duck Egg Lining Hornby are delighted to present the newest addition to the TT:120 diesel locomotive family: the Brush Type 2 Class 30 and 31. This brand-new, highly detailed tooling covers the extensive history of the ‘Gargoyles’: from skinhead examples from the late 50s, to modern Class 31s retrofitted with high intensity lights and NRN roof pods. This exciting new range of Type 2s will be available in either DCC Ready or Sound Fitted format. TT3071M depicts Class 30 D5502 in BR Green with duck egg blue stripes. Model Specification: Highly detailed model based on extensive research and design Die-cast chassis Wealth of separately fitted parts, including front end handrails, disc headcodes (where applicable) and roof grille Detailed cab interior Powerful five-pole motor providing power to all wheels Electrical pick-ups on all wheels Pivoting NEM coupling sockets Accessory pack that includes optional buffer beam pipes Minimum 2nd radius curves Electronics: Next18 DCC Decoder socket compatible with HM7000 system Decoder socket housed underneath clip-fit body for easy access Space for HM7070 Power Bank for uninterrupted running Tooling: Indicator headcode discs ‘Skinhead’ roof Toffee Apple cab style Mirrlees exhaust Side steps Oil filler Water filler Open boiler port Without door louvres Livery: BR Green with duck egg stripes Later British Railways crests Authentic livery colours and font types Semi-gloss finish - TT:120 Scale

Hornby BR Class 31 31219 BR Civil Engineers "Dutch" (TT)

BR Class 31 31219 BR Civil Engineers "Dutch" Hornby are delighted to present the newest addition to the TT:120 diesel locomotive family: the Brush Type 2 Class 30 and 31. This brand-new, highly detailed tooling covers the extensive history of the ‘Gargoyles’: from skinhead examples from the late 50s, to modern Class 31s retrofitted with high intensity lights and NRN roof pods. This exciting new range of Type 2s will be available in either DCC Ready or Sound Fitted format. TT3074M depicts Class 31219 in BR Civil Engineers ‘Dutch’ Grey & Yellow. Model Specification: Highly detailed model based on extensive research and design Die-cast chassis Wealth of separately fitted parts, including front end handrails, disc headcodes (where applicable) and roof grille Detailed cab interior Powerful five-pole motor providing power to all wheels Electrical pick-ups on all wheels Pivoting NEM coupling sockets Accessory pack that includes optional bufferbeam pipes Minimum 2nd radius curves Electronics: Next18 DCC Decoder socket compatible with HM7000 system Decoder socket housed underneath clip-fit body for easy access Space for HM7070 Power Bank for uninterrupted running Tooling: Plated headcode roof High intensity light NRN roof pods Later cab style English Electric exhaust Plated side steps Plated oil filler Plated water filler Plated boiler port Plated front door With door louvres Livery: BR Civil Engineers ‘Dutch’ Grey and Yellow Silver BR double arrows Blue Stratford Sparrow depot plaques Full yellow ends Authentic livery colours and font types Semi-gloss finish - TT:120 Scale

Hornby BR Class 31 31237 BR Railfreight Red Stripe (TT)

BR Class 31 31237 BR Railfreight Red Stripe Hornby are delighted to present the newest addition to the TT:120 diesel locomotive family: the Brush Type 2 Class 30 and 31. This brand-new, highly detailed tooling covers the extensive history of the ‘Gargoyles’: from skinhead examples from the late 50s, to modern Class 31s retrofitted with high intensity lights and NRN roof pods. This exciting new range of Type 2s will be available in either DCC Ready or Sound Fitted format. TT3073M depicts Class 31237 in BR Railfreight Grey with solebar red stripe. Model Specification: Highly detailed model based on extensive research and design Die-cast chassis Wealth of separately fitted parts, including front end handrails, disc headcodes (where applicable) and roof grille Detailed cab interior Powerful five-pole motor providing power to all wheels Electrical pick-ups on all wheels Pivoting NEM coupling sockets Accessory pack that includes optional bufferbeam pipes Minimum 2nd radius curves Electronics: Next18 DCC Decoder socket compatible with HM7000 system Decoder socket housed underneath clip-fit body for easy access Space for HM7070 Power Bank for uninterrupted running Tooling: Plated headcode roof Later cab style English Electric exhaust Plated side steps Plated oil filler Plated water filler Plated boiler port Plated front door With door louvres Livery: BR Railfreight grey Solebar red stripe Full yellow ends Large bodyside double arrows Authentic livery colours and font types Semi-gloss finish - TT:120 Scale

Hornby BR Class 31 31270 BR Blue (Sound Fitted) (TT)

BR Class 31 31270 BR Blue (Sound Fitted) Hornby are delighted to present the newest addition to the TT:120 diesel locomotive family: the Brush Type 2 Class 30 and 31. This brand-new, highly detailed tooling covers the extensive history of the ‘Gargoyles’: from skinhead examples from the late 50s, to modern Class 31s retrofitted with high intensity lights and NRN roof pods. This exciting new range of Type 2s will be available in either DCC Ready or Sound Fitted format. TT3072TXSM is DCC Sound Fitted depicts Class 31270 in BR Blue. Model Specification: Highly detailed model based on extensive research and design Die-cast chassis Wealth of separately fitted parts, including front end handrails, disc headcodes (where applicable) and roof grille Detailed cab interior Powerful five-pole motor providing power to all wheels Electrical pick-ups on all wheels Pivoting NEM coupling sockets Accessory pack that includes optional bufferbeam pipes Minimum 2nd radius curves Electronics: Next18 DCC Decoder socket compatible with HM7000 system Decoder socket housed underneath clip-fit body for easy access Space for HM7070 Power Bank for uninterrupted running Sound: Utilises high-fidelity HM7000 sound file Chassis-mounted speaker Tooling: Glazed headcode roof Later cab style English Electric exhaust Plated side steps Oil filler Plated water filler Plated boiler port Plated front door With door louvres Livery: BR Blue Full yellow ends Small bodyside double arrows Authentic livery colours and font types Semi-gloss finish - TT:120 Scale

Hornby BR Class 31 31270 BR Blue (TT)

BR Class 31 31270 BR Blue Hornby are delighted to present the newest addition to the TT:120 diesel locomotive family: the Brush Type 2 Class 30 and 31. This brand-new, highly detailed tooling covers the extensive history of the ‘Gargoyles’: from skinhead examples from the late 50s, to modern Class 31s retrofitted with high intensity lights and NRN roof pods. This exciting new range of Type 2s will be available in either DCC Ready or Sound Fitted format. TT3072M depicts Class 31270 in BR Blue. Model Specification: Highly detailed model based on extensive research and design Die-cast chassis Wealth of separately fitted parts, including front end handrails, disc headcodes (where applicable) and roof grille Detailed cab interior Powerful five-pole motor providing power to all wheels Electrical pick-ups on all wheels Pivoting NEM coupling sockets Accessory pack that includes optional bufferbeam pipes Minimum 2nd radius curves Electronics: Next18 DCC Decoder socket compatible with HM7000 system. Decoder socket housed underneath clip-fit body for easy access. Space for HM7070 Power Bank for uninterrupted running Tooling: Glazed headcode roof Later cab style English Electric exhaust Plated side steps Oil filler Plated water filler Plated boiler port Plated front door With door louvres Livery: BR Blue Full yellow ends Small bodyside double arrows Authentic livery colours and font types Semi-gloss finish - TT:120 Scale

Hornby LNER J50 Class 68958 BR Black (Early) (TT)

LNER J50 Class 68958 BR Black (Early) Hot on the heels of the first run of J50’s, is this BR (Early) J50 Class 68958 tank engine for your TT:120 collection. Moulded in both die-cast and plastic, this characterful locomotive looks and performs excellently thanks to all-wheel pickups and a smooth coreless motor. For those operating on DCC, a 6-Pin decoder socket is located within the boiler and is compatible with HM7000.  This example depicts No.68958 in BR Black livery, with early emblems on the tank sides. Model Specification: Based on new J50 tooling suite Expertly moulded die-cast body and chassis for added realism and weight Number of separately fitted parts, including smokebox door, water filler caps, chimney, safety valves, handrails, lamp irons and buffers. Brass double-jointed connector rods with metal securing pins Detailed cab interior Pivoting NEM sockets for improved coupling around tight curves Precision-engineered coreless motor for smooth running All-wheel pick-ups Accessory pack Capable of traversing 1st radius curves, but recommended minimum is 2nd radius. Electronics: 6-Pin DCC Decoder socket compatible with HM7000 system. Tooling: Smokebox door numberplate Coal rails Livery: BR Plain Black Livery ‘Cycling Lion’ Early Emblem on tank sides Authentic colours and typefaces used Semi-gloss finish Era 4. - TT:120 Scale

Hornby A1X Terrier 735 LSWR Lined Green (TT)

A1X Terrier 735 LSWR Lined Green  This delightful TT:120 scale LB&SCR A1/A1X 0-6-0 Terrier Steam Locomotive model features the highly accurate 2025 tooling suite. A beautiful representation of the ever-popular Class A1, the model perfectly captures the diminutive character of the prototype, and has been designed for smooth and reliable operation, including provision for digital command control via a 6-pin decoder socket. This particular example depicts No.735 in London and South Western Railway Lined Green livery. Model Specification: Based on new 2025 A1/A1X Terrier tooling suite Expertly moulded die-cast body and chassis for added realism and weight Number of separately fitted parts, including smokebox door, water filler caps, handrails, lamp irons and buffers. Brass connector rods with metal securing pins Detailed cab interior Pivoting NEM sockets for improved coupling around tight curves Precision-engineered coreless motor for smooth running All-wheel pick-ups Accessory pack Capable of traversing 1st radius curves, but recommended minimum is 2nd radius. Electronics: 6-Pin DCC Decoder socket compatible with HM7000 system Tooling: Stroudley chimney Flush smokebox door Four lamp brackets on front and rear Low bufferstock with no lamp brackets Steam pipes fitted Small cab bunker with no coal rails Westinghouse pump removed Livery: LSWR Lined Green Livery Maroon edging to tank and cab sides - TT:120 Scale

Hornby Coalfield Freight Class 37 Train Set (Sound Fitted) (TT)

Coalfield Freight Class 37 Train Set (Sound Fitted) Take a step back in time with ‘Coalfield Freight’ Train Set, the perfect introduction into the terrific world of TT:120 gauge from Hornby.  Whether you’re a beginner, returning to the hobby or a seasoned railway modeller, this starter set has everything you need to get started in the space-saving scale of ‘Tabletop’ TT:120. This set includes a highly detailed model of a Class 37 Diesel locomotive, three colourful wagons, oval starter track, siding and controller. Not only is this set easy to build and endlessly entertaining, the well-designed and durable TT:120 locomotives mean you can rest assured your train set will work for many years to come. With a plethora of separately available extension track packs, rolling stock, buildings and accessories, the possibilities for expanding your collection are endless! Inside the box, you’ll find a highly detailed, motorised diesel locomotive alongside three British Railway freight hopper wagons, each beautifully decorated. The set includes all the track you need to create your miniature railway, as well as an electric controller for smooth operation. Includes: BR Class 37 37799 'Sir Dyfed County of Dyfed' in Triple Grey Coal Sector Livery 3x HFA MGR Coal Hoppers in Coal Sector Livery 3rd Radius Oval of Track with siding (125cm x 84cm) Wall Plug Transformer DCC Power Connecting Track Re-Railer - TT:120 Scale

Hornby Coalfield Freight Class 37 Train Set (TT)

Coalfield Freight Class 37 Train Set Take a step back in time with ‘Coalfield Freight’ Train Set, the perfect introduction into the terrific world of TT:120 gauge from Hornby.  Whether you’re a beginner, returning to the hobby or a seasoned railway modeller, this starter set has everything you need to get started in the space-saving scale of ‘Tabletop’ TT:120. This set includes a highly detailed model of a Class 37 Diesel locomotive, three colourful wagons, oval starter track, siding and controller. Not only is this set easy to build and endlessly entertaining, the well-designed and durable TT:120 locomotives mean you can rest assured your train set will work for many years to come. With a plethora of separately available extension track packs, rolling stock, buildings and accessories, the possibilities for expanding your collection are endless! Inside the box, you’ll find a highly detailed, motorised diesel locomotive alongside three British Railway freight hopper wagons, each beautifully decorated. The set includes all the track you need to create your miniature railway, as well as an electric controller for smooth operation. Includes: BR Class 37 37799 'Sir Dyfed County of Dyfed' in Triple Grey Coal Sector Livery 3x HFA MGR Coal Hoppers in Coal Sector Livery 3rd Radius Oval of Track with siding (125cm x 84cm) DC Train Controller Wall Plug Transformer Power Connecting Track Re-Railer - TT:120 Scale

Oxford Diecast Sunbeam Rapier Mk.III Velvet Green/Sage Green (1:76)

Sunbeam Rapier Mk.III Velvet Green/Sage Green Modelled on the Sunbeam Rapier produced by the Rootes Group between 1955 and 1976, our Oxford 1:76 scale model is based on the two door Series III which was introduced in 1959. Improvements over its predecessors included modified side grilles, a re-styled number plate recess on the boot and a revised side flash with the Rapier logo towards the rear. Windscreen pillars were finer, increasing the windscreen area while inside, the seats and control panels were also upgraded.  Our 1:76 scale model appears featuring these refinements in another of the Rapier’s authentic bright two-tone colour schemes with a deep green body and pale green  masked roof, side flash and wheel inserts.  The interior seating is moulded in a soft muted green. The car is registered BYX 275. - 1:76 Scale

Oxford Diecast Ford Transit Mk.4 RAC (1:76)

Ford Transit Mk.4 RAC The Ford Transit Mk4 represented the 3rd generation of the vehicle in real life, spanning the years from 2000 to 2006.  This vehicle was different in that it had been designed in the USA and contained many cutting edge features; it came with automatic transmission; front or rear wheel drive; more cargo space and greater towing capacity. An option on rear wheel drive models included controls mounted on the dashboard, a specially adapted manual mode, tow-haul mode, economy mode and winter mode. All of these plus points would have made it an ideal vehicle for the RAC, whose key role is helping motorists in distress in all conditions and sometimes over difficult terrain. Our model is registered VE03 GGZ from 2003 and is decorated in the ultra modern bright orange with red and white chevron back with a blue and white panel promoting the RAC. To the sides and front, the printed information is in white against the orange ground, as well as a dark blue and white panel masked along the sides. A notable feature is the clever way in which the offside front wing chevron decals have been printed over the curved surface – it is absolutely flush!  The van interior is moulded completely black. A final tooling modification on this release sees the addition of a roof bar positioned right at the back of the roof – authentic down to the final detail! - 1:76 Scale

Pantasy Retro Gumball Machine - 936 pcs

Retro Gumball Machine - 936 pcs This is a self-build brick model of a traditional gumball machine. It includes twelve miniature brick models that fit inside the capsules. If you insert a coin into the slot and then turn the knob, a capsule will fall out of the dispenser. It is sure to look great on display in your home or office. Features: Detailed replica of a traditional gumball machine Insert a coin and turn the knob to collect a capsule The capsules can be opened up Twelve mini models are included to put in the capsules Packed full of interesting details Number of pieces: 936 pieces Suitable for ages 6+ years Model dimensions: 16cm length, 17cm width, 36cm height Box dimensions: 34cm length, 24cm width, 14cm height

Pantasy Retro Tape Cassette Player - 569 pcs

Retro Tape Cassette Player - 569 pcs This is a self-build brick model of a traditional tape cassette player from the 1980s, complete with plug-in headphones and two tapes. The exterior of the player is finished with a spray paint style metallic blue colour to recreate the authentic sheen of a real cassette player. The headphones can be plugged into two different headphone slots, while the side button can be pressed to open up the tape deck. A display stand is also included for the headphones to be stored raised off the table, plus a stand for one of the tapes. Unfortunately it will not actually play any of your classic 80s tunes, but it is sure to look great on display in your home or office. Features: Detailed replica of a typical 1980s portable tape player Includes model headphones and two tapes Player can be opened and a tape inserted/removed Packed full of interesting details Does not actually play 1980s bangers Number of pieces: 569 pieces Suitable for ages 6+ years Model dimensions (length, width, height) Cassette player: 10cm x 3.5cm x 15cm Tape with stand: 10cm x 7.5cm x 6.5cm Headphones with stand: 18cm x 7.5cm x 22.2cm Box dimensions: 24cm length, 24cm width, 8cm height

Rapido UK RCH 1907 Open Wagon Tredegar No. 3410

RCH 1907 Open Wagon Tredegar No. 3410 RCH 1907 Spec Open Wagon Tredegar No. 3410 7-plank wagon with side & end doors Round-bottom grease axleboxes Single-sided brakes Straight V-hangers Ribbed buffers Split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets - OO Scale

Rapido UK RCH 1907 Open Wagon BR (ex-Arley Colliery Co. Ltd.) No. P198398

RCH 1907 Open Wagon BR (ex-Arley Colliery Co. Ltd.) No. P198398 RCH 1907 Spec Open Wagon BR (ex-Arley Colliery Co. Ltd.) No. P198398 7-plank wagon with side & end doors Round-bottom grease axleboxes Twin-sided brakes Bent V-hangers Ribbed buffers Split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets - OO Scale

Rapido UK RCH 1907 Open Wagon BR (ex-Swansea Navigation) No. P117440

RCH 1907 Open Wagon BR (ex-Swansea Navigation) No. P117440 RCH 1907 Spec Open Wagon BR (ex-Swansea Navigation) No. P117440 7-plank wagon with side & end doors Square grease axleboxes Twin-sided brakes Bent V-hangers Ribbed buffers Split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets - OO Scale

Rapido UK RCH 1907 Open Wagon Cains of Wallasey No. 3

RCH 1907 Open Wagon Cains of Wallasey No. 3 RCH 1907 Spec Open Wagon Cains of Wallasey No. 3 7-plank wagon with side & end doors Ellis axleboxes Twin-sided brakes Bent V-hangers Ribbed buffers Split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets - OO Scale

Rapido UK RCH 1907 Open Wagon Colman’s Mustard No. 20

RCH 1907 Open Wagon Colman’s Mustard No. 20 RCH 1907 Spec Open Wagon Colman’s Mustard No. 20 7-plank wagon with side & end doors Ellis axleboxes Twin-sided brakes Bent V-hangers Ribbed buffers Split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets - OO Scale

Rapido UK RCH 1907 Open Wagon G. F. Sleight No. 79

RCH 1907 Open Wagon G. F. Sleight No. 79 RCH 1907 Spec Open Wagon G. F. Sleight No. 79 7-plank wagon with side & end doors Round-bottom grease axleboxes Single-sided brakes Bent V-hangers Ribbed buffers Split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets - OO Scale

Rapido UK RCH 1907 Open Wagon Goldendale Iron Co No. 598

RCH 1907 Open Wagon Goldendale Iron Co No. 598 RCH 1907 Spec Open Wagon Goldendale Iron Co No. 598 7-plank wagon with side & end doors Round-bottom grease axleboxes Single-sided brakes Bent V-hangers Smooth tapered buffers Split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets - OO Scale

Rapido UK RCH 1907 Open Wagon Great Central Railway No. 05481

RCH 1907 Open Wagon Great Central Railway No. 05481 RCH 1907 Spec Open Wagon Great Central Railway No. 05481 7-plank wagon with side & end doors Round-bottom grease axleboxes Single-sided brakes Bent V-hangers Ribbed buffers Split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets - OO Scale

Rapido UK RCH 1907 Open Wagon Highland Railway Loco Coal No. 2968

RCH 1907 Open Wagon Highland Railway Loco Coal No. 2968 RCH 1907 Spec Open Wagon Highland Railway Loco Coal No. 2968 7-plank wagon with side & end doors Ellis axleboxes Twin-sided brakes Bent V-hangers Ribbed buffers Split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets - OO Scale

Rapido UK RCH 1907 Open Wagon NCB Silvertown No. 256

RCH 1907 Open Wagon NCB Silvertown No. 256 RCH 1907 Spec Open Wagon NCB Silvertown No. 256 7-plank wagon with side & end doors RCH split axleboxes Twin-sided brakes Bent V-hangers Ribbed buffers Split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets - OO Scale

Rapido UK RCH 1907 Open Wagon New Ystradowen Colly. Co. Ld. No. 532

RCH 1907 Open Wagon New Ystradowen Colly. Co. Ld. No. 532 RCH 1907 Spec Open Wagon New Ystradowen Colly. Co. Ld. No. 532 7-plank wagon with side & end doors Square grease axleboxes Single-sided brakes Straight V-hangers Smooth tapered buffers Split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets - OO Scale

Rapido UK RCH 1907 Open Wagon Sir John L L Kaye Bart. No. 9

RCH 1907 Open Wagon Sir John L L Kaye Bart. No. 9 RCH 1907 Spec Open Wagon Sir John L L Kaye Bart. No. 9 7-plank wagon with side & end doors Ellis axleboxes Single-sided brakes Bent V-hangers Smooth tapered buffers Split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets - OO Scale

Peco TT Gauge - Flexible Field Fencing, 1360mm

Flexible Field Fencing The flexible field fencing represents a typical wooden post and bar-style fence that is so often seen separating boundaries in fields, and alongside the permanent way. Being produced in a flexile plastic mean that it can be placed on an undulating contoured surface, thus replicating reality. One pack provides straight sections only, the other gives modellers a variety of gate sand stiles. Moulded in brown plastic, can be used as-is, or painted as desired. Length: 1360mm - TT:120 Scale

Hornby Railroad: Class 66 GBRf 66775 'HMS Argyll'

Railroad: Class 66 GBRf 66775 'HMS Argyll' Product Information: The Railroad GBRf Class 66 66775 'HMS Argyll' model is a faithful replica of the original locomotive, with realistic detailing and space for a 21-pin sound decoder for effortless upgrade. History: Built in Muncie, Indiana and entering service under No. 66775, this locomotive was named in 2017 after the famous and oldest serving Type 23 frigates in the Royal Navy, ‘HMS Argyll’. It carries the pennant number F231 on its bodyside with the Royal Navy white ensign and crest on the cab sides in celebration of the famous Frigate. 

Hornby Railroad: Class 66 GBRf 66775 'HMS Argyll' (DCC Sound Fitted)

Railroad: Class 66 GBRf 66775 'HMS Argyll' (DCC Sound Fitted) Product Information: The Railroad GBRf Class 66 66775 'HMS Argyll' model is a faithful replica of the original locomotive, featuring a HM7000 21-pin sound decoder preloaded with realistic Class 66 sound recordings and etched nameplates. History: Built in Muncie, Indiana and entering service under No. 66775, this locomotive was named in 2017 after the famous and oldest serving Type 23 frigates in the Royal Navy, ‘HMS Argyll’. It carries the pennant number F231 on its bodyside with the Royal Navy white ensign and crest on the cab sides in celebration of the famous Frigate. 

Tamiya Honda CB1000F (1:12)

Honda CB1000F (1:12) Description: Tamiya is proud to announce the release of the Honda CB1000F as a new addition to our 1/12 Motorcycle Series. Honda’s CB series of road sport bikes has a long and proud history of innovation; it started with the 1959 Benly CB92 Super Sports and includes machines such as the genre-defining 1969 CB750 FOUR and its inline four engine, the DOHC 4-valve engine CB750F/900F developed for the European market, and the race-focused 1981 CB1100R. Fast forward to March 2025 and Honda announced that its existing flagship CB1300SF would be passing on the torch to the CB1000F Concept. Shortly after, in November of that year it went on sale as the CB1000F. The CB1000F’s “Best Balance Roadster” design concept demanded that it be at home in a variety of scenes from everyday use to touring.  It inherits and updates the iconic “Flowing Line” styling popularised on its CB750F/900F predecessors, the shape flowing smoothly from the tank right back to the rear cowl, via the side covers to give the bike its powerful and speedy silhouette. The round LED headlight catches the eye with its modern yet traditional design encircled by a ring-shaped light and featuring a plated rim and central section inscribed with the HONDA logo. At the rear, the seat’s surface pattern is inspired by the CB750F, and the eye is drawn to design cues like the large taillight and the muffler that dominates the right side of the bike. Some say the CB designation stands for the C in “motor cycle” and the B in “clubman,” but it could be argued that this new iteration has a C for “creative” and a B for “benchmark.” Either way, it promises hours of stress-free riding for all: another icon in a series full of them.   About the Model: This is a 1/12 scale model assembly kit. Length: 178mm, height: 73mm, height: 109mm The form and flowing lines of the Honda CB1000F are captured in style Main components such as engine, front and rear suspension, muffler and stand are attached to the frame by screws The actual bike’s metal-plated sections such as muffler, headlight, front fork inner tubes and side mirror surfaces are depicted by metal-plated parts A clear red part is included to capture the distinctive taillight, and clear parts to recreate the ring around the headlight and its surface part, LCD display, and front windshield Features realistic depictions of the liquid-cooled inline-4 engine and radiator hoses featuring mesh patterns (it is about 25 years since we released a kit depicting an uncowled engine) One-piece part authentically recreates fuel tank and front fender together to limit parting lines Chain is split into right and left halves, and finely recreates roller sections Brake disc parts have minute holes, and outer and inner discs are separate parts for easier painting Includes a metal rear damper spring, and vinyl tubing for pipes such as clutch wiring and brake hose Dedicated front and rear synthetic rubber tyres have realistic depictions of tread patterns, and the seat has authentic renderings of leather patterns Comes with masking stickers to use for metre and fuel tank cap Choose whether to use the headlight cowl, which is optional on both the full-size bike and this model  

Airfix Westland Sea King HC 4 (1:72)

Westland Sea King HC 4 This detailed 1:72 scale replica of the Westland Sea King HC.4 'Commando' includes 133 plastic components, providing an engaging project for intermediate modellers. Tailored for amphibious missions and tactical troop deployment, this variant omits the side floats of earlier Sea King models, making it perfect for land operations while maintaining folding rotors and tail for naval use. Key Features: 1:72 scale model with 133 plastic parts Skill level 2 - suitable for modellers aged 8 and above Two authentic paint schemes included Folding rotors and tail mechanism can be modelled Detailed cockpit and troop compartment interior Option to display radar-warning and infrared jamming devices Decals for Falklands, Gulf and Afghanistan operational service History: The 'Commando' variant of the Sea King was specifically designed for amphibious warfare and tactical troop deployment. Initially suggested as a tactical transport for the Egyptian Air Force, it did not require the amphibious features of previous Sea Kings, leading to the removal of side floats. Featuring folding rotors and tail, the Commando was introduced into the Royal Navy as the Sea King HC.4. It was later equipped with radar-warning and infrared jamming systems and could release M130/M147 flares as countermeasures. In addition to transporting troops, it could carry underslung loads up to 2.5 tonnes. With an extended range and capacity to carry 28 troops, it was perfect for amphibious transport duties. The HC.4 was actively used in conflicts in the Falklands, Balkans, Gulf, Lebanon, and Afghanistan. It frequently undertook missions to evacuate injured personnel and refugees, as well as supporting and preparing for ground operations. It was scheduled for retirement from UK Forces service in March 2016. The Westland Sea King is a product of Leonardo UK Ltd and all rights in it, including its name, are hereby reserved. The models have been produced with the permission and assistance of Leonardo MW Ltd.

Graham Farish BR Mk1 POS Royal Mail Travelling Post Office Red 80318 (N)

BR Mk1 POS Royal Mail Travelling Post Office Red 80318 This Graham Farish model of a POS coach carries all the hallmarks of this iconic design, the distinctive profile of the Mk1 coach is captured to a tee from the bodysides to the roof where finely moulded ventilators can be found. On the bodysides the handles and grab handles surrounding each door are moulded precisely, whilst the handrails aside each loading door are separate metal wire fittings. At either end, the corridor gangway is complete with lamp irons on either side and within, the corridor doors are modelled with the two small windows that is flush glazed – in the same way all of the windows on the model are. Metal grab handles are added to each end individually and metal toilet filler pipes extend to the roof. Footboards are included on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders and other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, operating in tandem with the bogie. The icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Details: Pristine Royal Mail Travelling Post Office Red livery Running No. 80318 B4 Bogies Scallop Roof Ventilators Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 136mm (over couplings) - N Scale

Graham Farish 8 Plank Wagon End Door 'Modern Transport Liverpool' Grey 1206(N)

8 Plank Wagon End Door 'Modern Transport Liverpool' Grey 1206 Britain’s Railways were developed primarily to move freight and by the early twentieth century, hundreds of independent companies were operating their own wagons to transport their goods around the UK by rail. Fleet sizes ranged from small concerns with a single wagon to large enterprises whose wagon count could run into the hundreds. The majority of wagons in private ownership were wooden bodied open wagons and by far the most common commodity that they carried was coal, although other materials, including coke, minerals and aggregates might also be transported depending on the nature of business conducted by the wagon’s owner. Various types of 8 Plank Wagon were built, and this Graham Farish model depicts one with fixed ends, unloading would therefore be via the side doors and bottom discharge doors, which on the model are neatly engraved into the wagon’s bodyshell which is moulded with crisp plank lines and ironwork detailing. Below the solebar the W irons, axleboxes and springs are all reproduced to great effect, with separate brakes and brake leavers and metal door stops completing the look. The model runs on spoked wheels which are of metal construction whilst metal buffers adorn the bufferbeams. Authentic colours and typefaces are employed during the livery application prototype, completing this high-fidelity model. Details: Pristine ‘Modern Transport Liverpool’ Grey livery Running No. 1206 Features: Length 49mm (over couplings) - N Scale

Bachmann SSA Scrap Wagon EWS 470078 [W]

SSA Scrap Wagon EWS 470078 [W] The POA Scrap Wagons were built from new or converted from other, redundant types, during the 1980s to carry scrap metal. The open box design was loaded and unloaded using grab machines or electro-magnets and the wagons entered traffic in a bold blue and yellow colour scheme. Built by Standard Wagon and owned privately by Standard Railfreight, in 1990 British Rail purchased the fleet of 191 wagons upon which they were recoded as SSA under the Total Operations Processing System (TOPS). The Bachmann Branchline model boasts an injection moulded bodyshell with separately fitted ladders on either side. The chassis incorporates a heavy metal weight providing a low centre of gravity which, combined with the blackened metal wheelsets, ensures smooth and reliable running. Details: Weathered EWS livery Running No. 470078 Features: Length 126mm (over couplings) - OO Scale

Bachmann SR 12T Even Planked Ventilated Van BR Bauxite (Early) S49107

SR 12T Even Planked Ventilated Van BR Bauxite (Early) S49107 Britain’s railways were developed primarily to move freight and the early railway companies employed vans of many different designs to transport goods and merchandise that required covered transport. Each railway company had its own designs, and a defining feature of the Southern Railway’s standard vans was the elliptical roof. The vans were clad with planks of an even width, although later builds employed two widths of plank in a 2+2 formation, and later still plywood cladding was also used. The ventilators fitted at either end of the van allowed fresh air to circulate inside keeping perishable items cool whilst in transport. This Branchline models depicts one of the many ventilated vans built with even cladding, replicated with fine engraving whilst precision moulding captures the external bracing of the van body and the door hinges and locking detail, even down to individual rivets. The chassis employs metal wheelsets of the 3-hole disc variety, whilst the brakes, brake handles and associated gear is all included. Representing a van fitted with vacuum brakes, the brake cylinder is mounted underneath the wagon and brake pipes are fitted to each bufferbeam alongside metal buffer heads cosmetic coupling hooks. Details: Pristine BR Bauxite (Early) livery Running No. S49107 Features: NEM Coupling Pockets Length 86mm (over couplings) - OO Scale

Bachmann SR 12T Even Planked Ventilated Van Express Dairy Company N48359

SR 12T Even Planked Ventilated Van Express Dairy Company N48359 Britain’s railways were developed primarily to move freight and the early railway companies employed vans of many different designs to transport goods and merchandise that required covered transport. Each railway company had its own designs, and a defining feature of the Southern Railway’s standard vans was the elliptical roof. The vans were clad with planks of an even width, although later builds employed two widths of plank in a 2+2 formation, and later still plywood cladding was also used. The ventilators fitted at either end of the van allowed fresh air to circulate inside keeping perishable items cool whilst in transport. This Branchline models depicts one of the many ventilated vans built with even cladding, replicated with fine engraving whilst precision moulding captures the external bracing of the van body and the door hinges and locking detail, even down to individual rivets. The chassis employs metal wheelsets of the 3-hole disc variety, whilst the brakes, brake handles and associated gear is all included. Representing a van fitted with vacuum brakes, the brake cylinder is mounted underneath the wagon and brake pipes are fitted to each bufferbeam alongside metal buffer heads cosmetic coupling hooks. Details: Pristine Express Dairy Company Blue livery Running No. N48359 Features: NEM Coupling Pockets Length 86mm (over couplings) - OO Scale

Bachmann SR 12T Even Planked Ventilated Van SR Brown 48472

SR 12T Even Planked Ventilated Van SR Brown 48472 Britain’s railways were developed primarily to move freight and the early railway companies employed vans of many different designs to transport goods and merchandise that required covered transport. Each railway company had its own designs, and a defining feature of the Southern Railway’s standard vans was the elliptical roof. The vans were clad with planks of an even width, although later builds employed two widths of plank in a 2+2 formation, and later still plywood cladding was also used. The ventilators fitted at either end of the van allowed fresh air to circulate inside keeping perishable items cool whilst in transport. This Branchline models depicts one of the many ventilated vans built with even cladding, replicated with fine engraving whilst precision moulding captures the external bracing of the van body and the door hinges and locking detail, even down to individual rivets. The chassis employs metal wheelsets of the 3-hole disc variety, whilst the brakes, brake handles and associated gear is all included. Representing a van fitted with vacuum brakes, the brake cylinder is mounted underneath the wagon and brake pipes are fitted to each bufferbeam alongside metal buffer heads cosmetic coupling hooks. Details: Pristine SR Brown livery Running No. 48472 Features: NEM Coupling Pockets Length 86mm (over couplings) - OO Scale

Bachmann POA Scrap Wagon 'Standard Railfreight' Blue & Yellow RLS5010

POA Scrap Wagon 'Standard Railfreight' Blue & Yellow RLS5010 The POA Scrap Wagons were built from new or converted from other, redundant types, during the 1980s to carry scrap metal. The open box design was loaded and unloaded using grab machines or electro-magnets and the wagons entered traffic in a bold blue and yellow colour scheme. Built by Standard Wagon and owned privately by Standard Railfreight, in 1990 British Rail purchased the fleet of 191 wagons upon which they were recoded as SSA under the Total Operations Processing System (TOPS). The Bachmann Branchline model boasts an injection moulded bodyshell with separately fitted ladders on either side. The chassis incorporates a heavy metal weight providing a low centre of gravity which, combined with the blackened metal wheelsets, ensures smooth and reliable running. Details: Pristine Standard Railfreight Blue & Yellow livery Running No. RLS5010 Features: Length 126mm (over couplings) - OO Scale

Bachmann POA Scrap Wagon 'Standard Railfreight' Blue & Yellow RLS5952 [W]

POA Scrap Wagon 'Standard Railfreight' Blue & Yellow RLS5952 [W] The POA Scrap Wagons were built from new or converted from other, redundant types, during the 1980s to carry scrap metal. The open box design was loaded and unloaded using grab machines or electro-magnets and the wagons entered traffic in a bold blue and yellow colour scheme. Built by Standard Wagon and owned privately by Standard Railfreight, in 1990 British Rail purchased the fleet of 191 wagons upon which they were recoded as SSA under the Total Operations Processing System (TOPS). The Bachmann Branchline model boasts an injection moulded bodyshell with separately fitted ladders on either side. The chassis incorporates a heavy metal weight providing a low centre of gravity which, combined with the blackened metal wheelsets, ensures smooth and reliable running. Details: Weathered Standard Railfreight Blue & Yellow livery Running No. RLS5952 Features: Length 126mm (over couplings) - OO Scale

Bachmann POA Mineral Wagon 'ARC/Tiger' Yellow TRL5313

POA Mineral Wagon 'ARC/Tiger' Yellow TRL5313 The POA Mineral Wagons were created in the late-1980s by building new bodies onto the chassis of redundant tank wagons in order to move aggregates. Owned by Tiger Rail, the wagons were leased to ARC and Foster Yeoman but within a few years, larger bogie wagons were being introduced and the POAs were gradually displaced onto a variety of traffic including scrap metal and coal. Later the wagons were purchased by British Rail and most ended up in engineering use. The Bachmann Branchline model employs a precision bodyshell with panel lines and ribs moulded both inside and out. Individual ladders are fitted to the body and chassis on each side. The chassis features separate brake shoes, brake handles, linkage and auxiliary gear, meanwhile the bufferbeam is completed with metal buffer heads, a coupling hook and lamp iron. Like all Branchline models, metal wheelsets are fitted as standard to ensure smooth running, and NEM coupling pockets make it easy to fit an alternative coupling system where required. Details: Pristine ARC/Tiger Yellow livery Running No. TRL5313 Features: NEM Coupling Pockets Length 121mm (over couplings) - OO Scale

Bachmann POA Mineral Wagon 'ARC/Tiger' Yellow TRL5314 [W]

POA Mineral Wagon 'ARC/Tiger' Yellow TRL5314 [W] The POA Mineral Wagons were created in the late-1980s by building new bodies onto the chassis of redundant tank wagons in order to move aggregates. Owned by Tiger Rail, the wagons were leased to ARC and Foster Yeoman but within a few years, larger bogie wagons were being introduced and the POAs were gradually displaced onto a variety of traffic including scrap metal and coal. Later the wagons were purchased by British Rail and most ended up in engineering use. The Bachmann Branchline model employs a precision bodyshell with panel lines and ribs moulded both inside and out. Individual ladders are fitted to the body and chassis on each side. The chassis features separate brake shoes, brake handles, linkage and auxiliary gear, meanwhile the bufferbeam is completed with metal buffer heads, a coupling hook and lamp iron. Like all Branchline models, metal wheelsets are fitted as standard to ensure smooth running, and NEM coupling pockets make it easy to fit an alternative coupling system where required. Details: Weathered ARC/Tiger Yellow livery Running No. TRL5314 Features: NEM Coupling Pockets Length 121mm (over couplings) - OO Scale

Bachmann POA Mineral Wagon 'Yeoman/Tiger' Grey TRL5355

POA Mineral Wagon 'Yeoman/Tiger' Grey TRL5355 The POA Mineral Wagons were created in the late-1980s by building new bodies onto the chassis of redundant tank wagons in order to move aggregates. Owned by Tiger Rail, the wagons were leased to ARC and Foster Yeoman but within a few years, larger bogie wagons were being introduced and the POAs were gradually displaced onto a variety of traffic including scrap metal and coal. Later the wagons were purchased by British Rail and most ended up in engineering use. The Bachmann Branchline model employs a precision bodyshell with panel lines and ribs moulded both inside and out. Individual ladders are fitted to the body and chassis on each side. The chassis features separate brake shoes, brake handles, linkage and auxiliary gear, meanwhile the bufferbeam is completed with metal buffer heads, a coupling hook and lamp iron. Like all Branchline models, metal wheelsets are fitted as standard to ensure smooth running, and NEM coupling pockets make it easy to fit an alternative coupling system where required. Details: Pristine Yeoman/Tiger Grey livery Running No. TRL5355 Features: NEM Coupling Pockets Length 121mm (over couplings) - OO Scale

Bachmann POA Mineral Wagon 'Yeoman/Tiger' Grey TRL5363 [W]

POA Mineral Wagon 'Yeoman/Tiger' Grey TRL5363 [W] The POA Mineral Wagons were created in the late-1980s by building new bodies onto the chassis of redundant tank wagons in order to move aggregates. Owned by Tiger Rail, the wagons were leased to ARC and Foster Yeoman but within a few years, larger bogie wagons were being introduced and the POAs were gradually displaced onto a variety of traffic including scrap metal and coal. Later the wagons were purchased by British Rail and most ended up in engineering use. The Bachmann Branchline model employs a precision bodyshell with panel lines and ribs moulded both inside and out. Individual ladders are fitted to the body and chassis on each side. The chassis features separate brake shoes, brake handles, linkage and auxiliary gear, meanwhile the bufferbeam is completed with metal buffer heads, a coupling hook and lamp iron. Like all Branchline models, metal wheelsets are fitted as standard to ensure smooth running, and NEM coupling pockets make it easy to fit an alternative coupling system where required. Details: Weathered Yeoman/Tiger Grey livery Running No. TRL5363 Features: NEM Coupling Pockets Length 121mm (over couplings) - OO Scale

Bachmann BR OCA Open Wagon BR Railfreight Red 112038

BR OCA Open Wagon BR Railfreight Red 112038 The OCA wagons were introduced at the start of the 1980s, becoming British Rail’s final standard design for a general purpose open wagon with wide, low sides made up of three hinged sections etc. to allow all manner of cargo to be loaded and unloaded. Introduced at a time when general merchandise traffic was in decline, the type was soon redeployed to other areas like departmental use, or rebuilt as timber carriers becoming OTAs. The Bachmann Branchline model features fine moulding throughout; from the bodysides and the representation of the doors on each side including hinge and securing chain detailing, to the interior and in particular the wagon floor with engraved planks and further moulded details. The chassis features an ensemble of brake equipment while each axle is mounted to chassis via a separate axlebox assembly, allowing a degree of pivot and rotation to ensure this long wheelbase wagon can negotiate model railway curves. Details: Pristine BR Railfreight Red livery Running No. 112038 Features: NEM Coupling Pockets Length 156mm (over couplings) - OO Scale

Bachmann BR 35T 'Covhop' Covered Hopper BR Bauxite (TOPS) B870780

BR 35T 'Covhop' Covered Hopper BR Bauxite (TOPS) B870780 British Railways produced many standard designs for locomotives and rolling stock, amongst which was the CovHop introduced from 1952 to become the standard covered hopper wagon to transport powders such as sand, soda ash and sugar. The Branchline Covhop boasts a number of interchangeable features allowing individual wagons to be modelled accurately and the wagon depicted here is one with roller bearing axle boxes, OLEO buffers, and disc brakes – these are fitted to one side of the wagon only and necessitate that the wheels on that side are plain disc wheels, as opposed to the 3-hole disc wheels found on the non-braked side. The highly detailed bodyshell is adorned with separate walkways, roof hatches and end bracing, while gravity discharge doors are incorporated into the chassis amongst the running gear. Details: Pristine BR Bauxite (TOPS) livery Running No. B870780 Features: NEM Coupling Pockets Length 104mm (over couplings) - OO Scale

Bachmann LMS 10001 BR Lined Green (Late Crest) (Sound Fitted)

LMS 10001 BR Lined Green (Late Crest) (Sound Fitted) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and this Bachmann Branchline model pays homage to the youngest of the pair, 10001. Built by the LMS and so becoming part of the Midland Region’s fleet under BR, after five years in traffic the ‘Twins’ were sent to the Southern Region (SR) between 1953 and 1955 for trails alongside the SR’s own prototype diesels. To work on the SR, additional headcode lights and brackets were fitted to suit the Southern 6 position headcode system and these remained a feature of both locomotives thereafter, as displayed on this model of No. 10001 which is depicted in BR Green livery and with the late crests that were applied by BR from 1956. By this time the pair had returned to the Midland Region and were employed on duties across the region. The Bachmann Branchline model of No. 10001 is a highly detailed replica of the prototype, adorned with numerous separately fitted components to accurately capture the appearance of this pioneering machine. The livery application captures the splendour of this elegant locomotive, whilst engine room detailing has been replicated through the bodyside windows for the first time. Inside, the proven combination of a five pole motor and twin flywheels, driving both bogies and with all-wheel drive will provide enough power for any prototypical train. Smooth running is assured thanks to the use of separate metal bearings on each axle. The 21 Pin DCC decoder socket makes it easy to equip this model for DCC use, and there’s space for a speaker to be fitted if you wish to add sound. Details: Pristine BR Lined Green Late Crest livery Running No. 10001 Six Headcode Lights & Brackets at each end Smooth Bodysides (No Steps) Water Scoops Fitted Features: Powerful 5 Pole Motor NEM Coupling Pockets Directional Lighting Chassis mounted switches allow tail lights to be turned off and provide a choice between Passenger or Freight headcode light configurations Cab Lighting Detailed Cab Interior with pre-fitted crew in one cab Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 254mm (over couplings) - OO Scale

Bachmann LMS 10000 BR Black (Early)

LMS 10000 BR Black (Early) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and this Bachmann Branchline model tells the story of No. 10000 during its time working on the Southern Region. Built by the LMS and so becoming part of the Midland Region’s fleet under BR, after five years in traffic the ‘Twins’ were sent to the Southern Region (SR) between 1953 and 1955 for trails alongside the SR’s own prototype diesels. To work on the SR, additional headcode lights and brackets were fitted to suit the Southern 6 position headcode system as displayed on this model of No. 10000, which is depicted in its striking black and silver livery with early emblems. The Bachmann Branchline model is a highly detailed replica of the pioneering prototype, adorned with numerous separately fitted components to accurately capture the appearance of this iconic machine. The livery application captures the splendour of this elegant locomotive, whilst engine room detailing has been replicated through the bodyside windows for the first time. Inside, the proven combination of a five pole motor and twin flywheels, driving both bogies and with all-wheel drive will provide enough power for any prototypical train. Smooth running is assured thanks to the use of separate metal bearings on each axle. The 21 Pin DCC decoder socket makes it easy to equip this model for DCC use, and there’s space for a speaker to be fitted if you wish to add sound. Details: Pristine BR Black & Silver Early Emblem livery Running No. 10000 Six Headcode Lights & Brackets at each end Bodysides Steps Water Scoops Fitted Features: Powerful 5 Pole Motor NEM Coupling Pockets Directional Lighting Chassis mounted switches allow tail lights to be turned off and provide a choice between Passenger or Freight headcode light configurations Cab Lighting Detailed Cab Interior with pre-fitted crew in one cab Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 254mm (over couplings) - OO Scale

Bachmann LMS 10000 BR Black (Early) (Sound Fitted)

LMS 10000 BR Black (Early) (Sound Fitted) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and this Bachmann Branchline model tells the story of No. 10000 during its time working on the Southern Region. Built by the LMS and so becoming part of the Midland Region’s fleet under BR, after five years in traffic the ‘Twins’ were sent to the Southern Region (SR) between 1953 and 1955 for trails alongside the SR’s own prototype diesels. To work on the SR, additional headcode lights and brackets were fitted to suit the Southern 6 position headcode system as displayed on this model of No. 10000, which is depicted in its striking black and silver livery with early emblems. The Bachmann Branchline model is a highly detailed replica of the pioneering prototype, adorned with numerous separately fitted components to accurately capture the appearance of this iconic machine. The livery application captures the splendour of this elegant locomotive, whilst engine room detailing has been replicated through the bodyside windows for the first time. Inside, the proven combination of a five pole motor and twin flywheels, driving both bogies and with all-wheel drive will provide enough power for any prototypical train. Smooth running is assured thanks to the use of separate metal bearings on each axle. The 21 Pin DCC decoder socket makes it easy to equip this model for DCC use, and there’s space for a speaker to be fitted if you wish to add sound. Details: Pristine BR Black & Silver Early Emblem livery Running No. 10000 Six Headcode Lights & Brackets at each end Bodysides Steps Water Scoops Fitted Features: Powerful 5 Pole Motor NEM Coupling Pockets Directional Lighting Chassis mounted switches allow tail lights to be turned off and provide a choice between Passenger or Freight headcode light configurations Cab Lighting Detailed Cab Interior with pre-fitted crew in one cab Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 254mm (over couplings) - OO Scale

Bachmann LMS 10001 BR Lined Green (Late Crest)

LMS 10001 BR Lined Green (Late Crest) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and this Bachmann Branchline model pays homage to the youngest of the pair, 10001. Built by the LMS and so becoming part of the Midland Region’s fleet under BR, after five years in traffic the ‘Twins’ were sent to the Southern Region (SR) between 1953 and 1955 for trails alongside the SR’s own prototype diesels. To work on the SR, additional headcode lights and brackets were fitted to suit the Southern 6 position headcode system and these remained a feature of both locomotives thereafter, as displayed on this model of No. 10001 which is depicted in BR Green livery and with the late crests that were applied by BR from 1956. By this time the pair had returned to the Midland Region and were employed on duties across the region. The Bachmann Branchline model of No. 10001 is a highly detailed replica of the prototype, adorned with numerous separately fitted components to accurately capture the appearance of this pioneering machine. The livery application captures the splendour of this elegant locomotive, whilst engine room detailing has been replicated through the bodyside windows for the first time. Inside, the proven combination of a five pole motor and twin flywheels, driving both bogies and with all-wheel drive will provide enough power for any prototypical train. Smooth running is assured thanks to the use of separate metal bearings on each axle. The 21 Pin DCC decoder socket makes it easy to equip this model for DCC use, and there’s space for a speaker to be fitted if you wish to add sound. Details: Pristine BR Lined Green Late Crest livery Running No. 10001 Six Headcode Lights & Brackets at each end Smooth Bodysides (No Steps) Water Scoops Fitted Features: Powerful 5 Pole Motor NEM Coupling Pockets Directional Lighting Chassis mounted switches allow tail lights to be turned off and provide a choice between Passenger or Freight headcode light configurations Cab Lighting Detailed Cab Interior with pre-fitted crew in one cab Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 254mm (over couplings) - OO Scale

Bachmann MR 3835 (4F) w/ Fowler Tender 43892 BR Black

MR 3835 (4F) w/ Fowler Tender 43892 BR Black The 4Fs were simple yet beautiful machines and the Branchline model pays homage to that with high fidelity mouldings for the main components like the smokebox, boiler, firebox and cab, which are all mounted on a diecast metal running plate. Countless separate detailing parts are then added like the metal handrails, turned brass safety valves, lamp irons and lubricators. Sprung metal buffers are fitted to both bufferbeams. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. This attention to detail extends to the tender, while the tender drawbar is adjustable to suit individual layout conditions and electrical connections are incorporated into the drawbar. Look inside the cab and you will find a sublime level of detail; the boiler backhead boasts an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. A poseable fallplate is fitted to the rear of the cab to complete the look. The Branchline 4F runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine BR Black ‘British Railways’ livery Running No. 43892 Fowler Tender with Water Pickup Gear Short Chimney Ross Pop Safety Valves Fluted Connecting Rods Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 221mm (over couplings) OO Scale 

Bachmann MR 3835 (4F) w/ Fowler Tender 43892 BR Black (SF)

MR 3835 (4F) w/ Fowler Tender 43892 BR Black (Sound Fitted) The 4Fs were simple yet beautiful machines and the Branchline model pays homage to that with high fidelity mouldings for the main components like the smokebox, boiler, firebox and cab, which are all mounted on a diecast metal running plate. Countless separate detailing parts are then added like the metal handrails, turned brass safety valves, lamp irons and lubricators. Sprung metal buffers are fitted to both bufferbeams. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. This attention to detail extends to the tender, while the tender drawbar is adjustable to suit individual layout conditions and electrical connections are incorporated into the drawbar. Look inside the cab and you will find a sublime level of detail; the boiler backhead boasts an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. A poseable fallplate is fitted to the rear of the cab to complete the look. The Branchline 4F runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine BR Black ‘British Railways’ livery Running No. 43892 Fowler Tender with Water Pickup Gear Short Chimney Ross Pop Safety Valves Fluted Connecting Rods Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack SOUND FITTED – Fitted with a ESU Loksound V5DCC 21 Pin DCC Sound Decoder Length 221mm (over couplings) OO Scale 

Bachmann MR 3835 (4F) w/ Fowler Tender 43982 BR Black (Late)

MR 3835 (4F) w/ Fowler Tender 43982 BR Black (Late) The 4Fs were simple yet beautiful machines and the Branchline model pays homage to that with high fidelity mouldings for the main components like the smokebox, boiler, firebox and cab, which are all mounted on a diecast metal running plate. Countless separate detailing parts are then added like the metal handrails, turned brass safety valves, lamp irons and lubricators. Sprung metal buffers are fitted to both bufferbeams. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. This attention to detail extends to the tender, while the tender drawbar is adjustable to suit individual layout conditions and electrical connections are incorporated into the drawbar. Look inside the cab and you will find a sublime level of detail; the boiler backhead boasts an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. A poseable fallplate is fitted to the rear of the cab to complete the look. The Branchline 4F runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine BR Black Late Crest livery Running No. 43982 Fowler Tender with Water Pickup Gear Short Chimney Ross Pop Safety Valves Fluted Connecting Rods Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 221mm (over couplings) OO Scale 

Bachmann MR 3835 (4F) w/ Johnson-Deeley Tender 3850 LMS Black (SF)

MR 3835 (4F) w/ Johnson-Deeley Tender 3850 LMS Black (Sound Fitted) The 4Fs were simple yet beautiful machines and the Branchline model pays homage to that with high fidelity mouldings for the main components like the smokebox, boiler, firebox and cab, which are all mounted on a diecast metal running plate. Countless separate detailing parts are then added like the metal handrails, turned brass safety valves, lamp irons and lubricators. Sprung metal buffers are fitted to both bufferbeams. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. This attention to detail extends to the tender, while the tender drawbar is adjustable to suit individual layout conditions and electrical connections are incorporated into the drawbar. Look inside the cab and you will find a sublime level of detail; the boiler backhead boasts an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. A poseable fallplate is fitted to the rear of the cab to complete the look. The Branchline 4F runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine LMS Black livery Running No. 3850 Johnson-Deeley Tender Tall Chimney with Capuchon Ramsbottom Safety Valves Fluted Connecting Rods Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack SOUND FITTED – Fitted with a ESU Loksound V5DCC 21 Pin DCC Sound Decoder Length 221mm (over couplings) OO Scale 

Bachmann GCR 9J (J11) 64305 BR Black (Early Emblem)

GCR 9J (J11) 64305 BR Black (Early Emblem) The Great Central Railway was a big mover of goods and amongst the locomotives it built for this purpose were the 9J 0-6-0s. Upon becoming part of the LNER in 1924 the 9Js were reclassified as J11s and this designation stayed remained into British Railways life and until withdrawal. Nicknamed ‘Pom Poms’ because their exhaust noise sounded very similar to the guns of the same name, these freight workhorses are replicated in OO scale by Bachmann Branchline. The J11s carried all the hallmarks of a locomotive designed by the GCR’s Chief Mechanical Engineer John G. Robinson and these features are replicated on the Branchline model using a precision moulded boiler, smokebox and firebox mounted on a diecast metal running plate. The distinctive Robinson cab is another high-fidelity moulding, within which boiler backhead is replicated using an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. The GCR tender has a distinctive look too with its high capacity and flared top edges, and again these trademark features are captured in miniature using high-fidelity mouldings. Coupling to the locomotive via a drawbar that is adjustable to suit individual layout conditions, electrical connections are integrated into it and a hinged fallplate is also fitted to the tender. Across the model separate components are added, from the metal handrails and sprung metal buffers, to the lamp irons at the front and rear, to complete the look of this freight machine. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. The black colour scheme is replicated with the usual care and attention that you expect from Bachmann Branchline, resulting in a paint finish that is rich and consistent throughout. Details like the running number, plates and plaques are then added using precision printing techniques for full authenticity. The Branchline J11 runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine BR Black Early Emblem livery Running No. 64305 Riveted Smokebox Door with Twin Handwheels, Numberplate and Lamp Iron mounted on the Smokebox Door LNER ‘Plantpot’ Chimney Snifter Valve LNER lowered Dome Ross Pop Safety Valves Parallel Buffer Shanks with End Collars Wakefield Lubricator (fitted to the left hand side) Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 220mm (over couplings) - OO Scale

Bachmann GCR 9J (J11) 64305 BR Black (Early Emblem) (Sound Fitted)

GCR 9J (J11) 64305 BR Black (Early Emblem) (Sound Fitted) The Great Central Railway was a big mover of goods and amongst the locomotives it built for this purpose were the 9J 0-6-0s. Upon becoming part of the LNER in 1924 the 9Js were reclassified as J11s and this designation stayed remained into British Railways life and until withdrawal. Nicknamed ‘Pom Poms’ because their exhaust noise sounded very similar to the guns of the same name, these freight workhorses are replicated in OO scale by Bachmann Branchline. The J11s carried all the hallmarks of a locomotive designed by the GCR’s Chief Mechanical Engineer John G. Robinson and these features are replicated on the Branchline model using a precision moulded boiler, smokebox and firebox mounted on a diecast metal running plate. The distinctive Robinson cab is another high-fidelity moulding, within which boiler backhead is replicated using an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. The GCR tender has a distinctive look too with its high capacity and flared top edges, and again these trademark features are captured in miniature using high-fidelity mouldings. Coupling to the locomotive via a drawbar that is adjustable to suit individual layout conditions, electrical connections are integrated into it and a hinged fallplate is also fitted to the tender. Across the model separate components are added, from the metal handrails and sprung metal buffers, to the lamp irons at the front and rear, to complete the look of this freight machine. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. The black colour scheme is replicated with the usual care and attention that you expect from Bachmann Branchline, resulting in a paint finish that is rich and consistent throughout. Details like the running number, plates and plaques are then added using precision printing techniques for full authenticity. The Branchline J11 runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine BR Black Early Emblem livery Running No. 64305 Riveted Smokebox Door with Twin Handwheels, Numberplate and Lamp Iron mounted on the Smokebox Door LNER ‘Plantpot’ Chimney Snifter Valve LNER lowered Dome Ross Pop Safety Valves Parallel Buffer Shanks with End Collars Wakefield Lubricator (fitted to the left hand side) Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 220mm (over couplings) - OO Scale

Bachmann GCR 9J 295 GCR Lined Black (Sound Fitted)

GCR 9J 295 GCR Lined Black (Sound Fitted) The Great Central Railway was a big mover of goods and amongst the locomotives it built for this purpose were the 9J 0-6-0s. Nicknamed ‘Pom Poms’ because their exhaust noise sounded very similar to the guns of the same name, these freight workhorses are replicated in OO scale by Bachmann Branchline. The 9Js carried all the hallmarks of a locomotive designed by the GCR’s Chief Mechanical Engineer John G. Robinson and these features are replicated on the Branchline model using a precision moulded boiler, smokebox and firebox mounted on a diecast metal running plate. The distinctive Robinson cab is another high-fidelity moulding, within which boiler backhead is replicated using an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. The GCR tender has a distinctive look too with its high capacity and flared top edges, and again these trademark features are captured in miniature using high-fidelity mouldings. Coupling to the locomotive via a drawbar that is adjustable to suit individual layout conditions, electrical connections are integrated into it and a hinged fallplate is also fitted to the tender. Across the model separate components are added, from the metal handrails and sprung metal buffers, to the lamp irons at the front and rear, to complete the look of this freight machine. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. The black colour scheme with its ornate three-colour lining is reproduced to exquisite effect, with a rich and consistent finish throughout. The Great Central lettering and company crest on the tender is the icing on the cake, comprising no fewer than six separate colours and replicated using precision printing techniques for full authenticity. The Branchline 9J runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine Great Central Railway Lined Black livery Running No. 295 Smooth Smokebox Door with original Handwheel Top Front Lamp Iron mounted above the Smokebox Door Robinson Tapered Chimney Draught Retarder Original Tall Dome Ramsbottom Safety Valves Parallel Buffer Shanks with End Collars Central Rib on Cab Roof Tender fitted with Water Pick-Up Gear Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 220mm (over couplings) - OO Scale

EFE Leyland Atlantean Open Top Devon General NBC 928 928GTA (1:76)

Leyland Atlantean Open Top Devon General NBC 928 928GTA The well-known bus operator, Devon General, began operating regular open top bus tours of the Torbay area in the summer of 1955 using vehicles converted from conventional double deckers. However, in 1961 these were replaced by a fleet of nine specially built Leyland Atlanteans with Metro-Cammell bodies, each seating 75 passengers. The nine were named after historical naval and maritime figures such as Sir Francis Drake and Sir John Hawkins, and soon earned the nickname ‘Sea Dogs’; a term Devon General even adopted for its own marketing. In their distinctive cream and red livery, they became a familiar sight on the 12A-12D routes serving Torquay, Paignton, Brixham, Babbacombe and Kingswear, and carried generations of holidaymakers for the next 20 years. They were built as convertibles, with detachable roofs, meaning that they could operate as normal double deckers during the low season. Upon nationalisation in 1969 Devon General became part of the new National Bus Company (NBC) but was amalgamated with the Western National Omnibus Company (itself part of the NBC) two years later. Under NBC the Sea Dogs were repainted into a poppy red and white livery, and also converted to one-man operation. They initially carried Devon General branding, but this was later superseded by Western National and other NBC liveries as their duties took them further afield into Cornwall and Dorset. Gradually their names disappeared too. Withdrawal commenced in 1982, and the Sea Dogs went their separate ways, finding use in places including London, Lancashire, East Yorkshire and Glasgow. Our model depicts registration 928GTA ‘Sir Humphrey Gilbert’ in its post-1969 condition as fleet number 928, finished in NBC Poppy Red and White with Devon General branding, as operating on service 12 to Brixham. It also features period advertising on the original-style rear engine bustle and separately fitted destination banner boards on the body sides. Like our 2025 ‘Sea Dogs’, the model comprises an amalgamation of new and refreshed tooling, with the enhanced lower deck benefiting from the addition of panel lines and round mirrors for the first time. The upper deck is fitted with metal handrails around the top edge and has the original high position front route blind; the first time this has featured on an EFE Road ‘Sea Dog’. Colours/details of final model may vary from illustration Authentically detailed die-cast model from EFE Road Complementary to OO scale model railways (1:76 scale)

EFE Rail Class 23 'Baby Deltic' Headcode Box D5901 BR Green (SYP) (N)

Class 23 'Baby Deltic' H/code Box D5901 BR Green (SYP) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: With TOPS panel applied before moving to the Railway Technical Centre Pristine BR Green (Small Yellow Panels) livery Running No. D5901 Centre Headcode Panels Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Headcode Box D5903 BR Green (FYE) (N)

Class 23 'Baby Deltic' Headcode Box D5903 BR Green (FYE) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green (Full Yellow Ends) livery Running No. D5903 Centre Headcode Panels Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Headcode Box D5905 BR Green (SYP) (N)

Class 23 'Baby Deltic' H/code Box D5905 BR Green (SYP) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green (Small Yellow Panels) livery Running No. D5905 Centre Headcode Panels Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Headcode Box D5908 BR Green (FYE) (N)

Class 23 'Baby Deltic' Headcode Box D5908 BR Green (FYE) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green (Full Yellow Ends) livery Running No. D5908 Centre Headcode Panels Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Headcode Box D5909 BR Blue (N)

Class 23 'Baby Deltic' Headcode Box D5909 BR Blue Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Blue livery Running No. D5909 Centre Headcode Panels Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Disc Headcode D5902 BR Green (Late) (N)

Class 23 'Baby Deltic' Disc Headcode D5902 BR Green (Late) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green Late Crest livery Running No. D5902 Disc Headcodes Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Disc Headcode D5906 BR Green (Late) (N)

Class 23 'Baby Deltic' Disc Headcode D5906 BR Green (Late) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green Late Crest livery Running No. D5906 Disc Headcodes Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Disc Headcode D5907 BR Green (Late) (N)

Class 23 'Baby Deltic' Disc Headcode D5907 BR Green (Late) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green Late Crest livery Running No. D5907 Disc Headcodes Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Disc Headcode D5909 BR Green (Late) (N)

Class 23 'Baby Deltic' Disc Headcode D5909 BR Green (Late) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green Late Crest livery Running No. D5909 Disc Headcodes Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Headcode Box D5900 BR Green (SYP) (N)

Class 23 'Baby Deltic' H/code Box D5900 BR Green (SYP) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green (Small Yellow Panels) livery Running No. D5900 Centre Headcode Panels Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

Graham Farish Class 101 2-Car 'Power Twin' DMU BR Green (Sound Fitted) (N)

Class 101 2-Car 'Power Twin' DMU BR Green (Speed Whiskers) (Sound Fitted) The Class 101 Diesel Multiple Units were the most numerous of all the first generation DMUs and had a long service life, remaining in use for almost half a century, and we’re delighted to present N Scale models of this iconic unit as part of the Graham Farish range. This two-car unit depicts a ‘Power Twin’ comprising two vehicles equipped with an engine and the associated transmission and whilst all of these details are replicated faithfully on the Graham Farish model, just one of the vehicles is motorised. Each of the two cars is constructed from precision moulded bodyshells with flush glazing and a high level of raised and engraved detailing, from the ventilators and rivets found on the roof to the door furniture and window frames along each bodyside. Each chassis is adorned with all the underframe components you’d see on the prototype, including the engine, transmission, battery boxes and auxiliary gear. Both vehicles are brought to life with an exquisite livery application, using accurate colours, fonts and logos, and the detail and decoration extends to the interior too, where seating is fitted and painted accordingly, and the cab provides crew seats along with a representation of the control desk. The bogies are moulded with a high level of relief detail and separate footsteps are added where appropriate, meanwhile metal wheelsets are employed and electrical pickups from every wheel provide power for the directional lights at each cab end. The motorised vehicle is fitted with a powerful three pole motor with flywheel and both cars have a 6 pin DCC decoder socket; in the trailer a function decoder can be used to work the directional lights whereas the powered vehicle has a pre-fitted speaker so a sound decoder could be fitted to add sound to the model Details: Pristine BR Green livery with Speed Whiskers 2-Car Unit comprising DMBS No. E51427 and DMCL No. E51497 Destination Blinds for Bradford and Doncaster Headcode B6 displayed at both ends Features: Accessory Pack NEM Coupling Pockets Powerful 3 Pole Motor with Flywheel Interior Detailing Directional Lighting Speaker Fitted Equipped with two 6 Pin DCC Decoder Sockets – recommended Decoder 2 x item No. 36-568A Length 262mm (over couplings) - N Scale

Graham Farish Class 101 2-Car 'Power Twin' DMU BR Green (Speed Whiskers) (N)

Class 101 2-Car 'Power Twin' DMU BR Green (Speed Whiskers) The Class 101 Diesel Multiple Units were the most numerous of all the first generation DMUs and had a long service life, remaining in use for almost half a century, and we’re delighted to present N Scale models of this iconic unit as part of the Graham Farish range. This two-car unit depicts a ‘Power Twin’ comprising two vehicles equipped with an engine and the associated transmission and whilst all of these details are replicated faithfully on the Graham Farish model, just one of the vehicles is motorised. Each of the two cars is constructed from precision moulded bodyshells with flush glazing and a high level of raised and engraved detailing, from the ventilators and rivets found on the roof to the door furniture and window frames along each bodyside. Each chassis is adorned with all the underframe components you’d see on the prototype, including the engine, transmission, battery boxes and auxiliary gear. Both vehicles are brought to life with an exquisite livery application, using accurate colours, fonts and logos, and the detail and decoration extends to the interior too, where seating is fitted and painted accordingly, and the cab provides crew seats along with a representation of the control desk. The bogies are moulded with a high level of relief detail and separate footsteps are added where appropriate, meanwhile metal wheelsets are employed and electrical pickups from every wheel provide power for the directional lights at each cab end. The motorised vehicle is fitted with a powerful three pole motor with flywheel and both cars have a 6 pin DCC decoder socket; in the trailer a function decoder can be used to work the directional lights whereas the powered vehicle has a pre-fitted speaker so a sound decoder could be fitted to add sound to the model Details: Pristine BR Green livery with Speed Whiskers 2-Car Unit comprising DMBS No. E51427 and DMCL No. E51497 Destination Blinds for Bradford and Doncaster Headcode B6 displayed at both ends Features: Accessory Pack NEM Coupling Pockets Powerful 3 Pole Motor with Flywheel Interior Detailing Directional Lighting Speaker Fitted Equipped with two 6 Pin DCC Decoder Sockets – recommended Decoder 2 x item No. 36-568A Length 262mm (over couplings) - N Scale

Graham Farish Class 101 2-Car DMU BR Blue (N)

Class 101 2-Car DMU BR Blue The Class 101 Diesel Multiple Units were the most numerous of all the first generation DMUs and had a long service life, remaining in use for almost half a century, and we’re delighted to present N Scale models of this iconic unit as part of the Graham Farish range. This two-car unit depicts a Class 101 in BR Blue livery operating in North East England and is typical of much of the fleet during the British Rail era. Each of the two cars is constructed from precision moulded bodyshells with flush glazing and a high level of raised and engraved detailing, from the ventilators and rivets found on the roof to the door furniture and window frames along each bodyside. Each chassis is adorned with all the underframe components you’d see on the prototype, including the engine, transmission, battery boxes and auxiliary gear. Both vehicles are brought to life with an exquisite livery application, using accurate colours, fonts and logos, and the detail and decoration extends to the interior too, where seating is fitted and painted accordingly, and the cab provides crew seats along with a representation of the control desk. The bogies are moulded with a high level of relief detail and separate footsteps are added where appropriate, meanwhile metal wheelsets are employed and electrical pickups from every wheel provide power for the directional lights at each cab end. The motorised vehicle is fitted with a powerful three pole motor with flywheel and both cars have a 6 pin DCC decoder socket; in the trailer a function decoder can be used to work the directional lights whereas the powered vehicle has a pre-fitted speaker so a sound decoder could be fitted to add sound to the model Details: Pristine BR Blue livery 2-Car Unit comprising DMBS No. E50166 and DTCL No. E56051 Destination Blinds for Hartlepool and Darlington Features: Accessory Pack NEM Coupling Pockets Powerful 3 Pole Motor with Flywheel Interior Detailing Directional Lighting Speaker Fitted Equipped with two 6 Pin DCC Decoder Sockets – recommended Decoder 2 x item No. 36-568A Length 262mm (over couplings) - N Scale

Graham Farish Class 101 2-Car DMU BR Regional Railways (N)

Class 101 2-Car DMU BR Regional Railways The Class 101 Diesel Multiple Units were the most numerous of all the first generation DMUs and had a long service life, remaining in use for almost half a century, and we’re delighted to present N Scale models of this iconic unit as part of the Graham Farish range. This two-car unit depicts a Class 101 in later life and having received a few modifications from its original condition, like the fitting of high intensity headlights and the addition of bodyside heater louvres. Each of the two cars is constructed from precision moulded bodyshells with flush glazing and a high level of raised and engraved detailing, from the ventilators and rivets found on the roof to the door furniture and window frames along each bodyside. Each chassis is adorned with all the underframe components you’d see on the prototype, including the engine, transmission, battery boxes and auxiliary gear. Both vehicles are brought to life with an exquisite livery application, using accurate colours, fonts and logos, and the detail and decoration extends to the interior too, where seating is fitted and painted accordingly, and the cab provides crew seats along with a representation of the control desk. The bogies are moulded with a high level of relief detail and separate footsteps are added where appropriate, meanwhile metal wheelsets are employed and electrical pickups from every wheel provide power for the directional lights at each cab end. The motorised vehicle is fitted with a powerful three pole motor with flywheel and both cars have a 6 pin DCC decoder socket; in the trailer a function decoder can be used to work the directional lights whereas the powered vehicle has a pre-fitted speaker so a sound decoder could be fitted to add sound to the model Details: Pristine BR Regional Railways livery Set No. 101660 2-Car Unit comprising DMBS No. 51189 and DTSL No. 54343 Destination Blinds for Sheffield and Manchester Piccadilly Features: Accessory Pack NEM Coupling Pockets Powerful 3 Pole Motor with Flywheel Interior Detailing Directional Lighting Speaker Fitted Equipped with two 6 Pin DCC Decoder Sockets – recommended Decoder 2 x item No. 36-568A Length 262mm (over couplings) - N Scale

Graham Farish Class 101 2-Car DMU BR Regional Railways (Sound Fitted) (N)

Class 101 2-Car DMU BR Regional Railways (Sound Fitted) The Class 101 Diesel Multiple Units were the most numerous of all the first generation DMUs and had a long service life, remaining in use for almost half a century, and we’re delighted to present N Scale models of this iconic unit as part of the Graham Farish range. This two-car unit depicts a Class 101 in later life and having received a few modifications from its original condition, like the fitting of high intensity headlights and the addition of bodyside heater louvres. Each of the two cars is constructed from precision moulded bodyshells with flush glazing and a high level of raised and engraved detailing, from the ventilators and rivets found on the roof to the door furniture and window frames along each bodyside. Each chassis is adorned with all the underframe components you’d see on the prototype, including the engine, transmission, battery boxes and auxiliary gear. Both vehicles are brought to life with an exquisite livery application, using accurate colours, fonts and logos, and the detail and decoration extends to the interior too, where seating is fitted and painted accordingly, and the cab provides crew seats along with a representation of the control desk. The bogies are moulded with a high level of relief detail and separate footsteps are added where appropriate, meanwhile metal wheelsets are employed and electrical pickups from every wheel provide power for the directional lights at each cab end. The motorised vehicle is fitted with a powerful three pole motor with flywheel and both cars have a 6 pin DCC decoder socket; in the trailer a function decoder can be used to work the directional lights whereas the powered vehicle has a pre-fitted speaker so a sound decoder could be fitted to add sound to the model Details: Pristine BR Regional Railways livery Set No. 101660 2-Car Unit comprising DMBS No. 51189 and DTSL No. 54343 Destination Blinds for Sheffield and Manchester Piccadilly Features: Accessory Pack NEM Coupling Pockets Powerful 3 Pole Motor with Flywheel Interior Detailing Directional Lighting Speaker Fitted Equipped with two 6 Pin DCC Decoder Sockets – recommended Decoder 2 x item No. 36-568A Length 262mm (over couplings) - N Scale

EFE Rail 54ft non-Corridor Composite S&DJR Lined Blue

54ft non-Corridor Composite S&DJR Lined Blue The EFE Rail 54ft non-Corridor Bogie Coaches are based on the brand’s highly acclaimed Isle of Wight Coaching stock – the prototypes for which were rebuilt from former London, Brighton & South Coast Railway vehicles before their move to the island. With no authentic coaching stock available to depict passenger operations of many of the Victorian railway companies, these EFE models give a true feel of train travel from yesteryear and come finished in authentic liveries for some of the pre-Grouping companies that have so far been uncatered for when it comes to ready to run coaching stock. Each model is produced using a high fidelity injection moulded bodyshell adorned with extra details, like the ornate metal handrails that are each separately fitted, the etched metal end steps and the emergency brake gear. Beneath each coach the truss rods have been authentically modelled alongside separate battery boxes, the Westinghouse brake components complete the look. Metal wheelsets are used throughout whilst the NEM coupling pockets are mounted on close-coupling mechanisms fitted to the coach chassis, providing close coupling whilst still allowing the models to negotiate second radius curves. Features: Pristine S&DJR Lined Blue livery Running No. 55 NEM Coupling Pockets Length 236mm (over couplings) - OO Scale

EFE Rail 54ft non-Corridor Third Caledonian Railway Plum & Off-White

54ft non-Corridor Third Caledonian Railway Plum & Off-White The EFE Rail 54ft non-Corridor Bogie Coaches are based on the brand’s highly acclaimed Isle of Wight Coaching stock – the prototypes for which were rebuilt from former London, Brighton & South Coast Railway vehicles before their move to the island. With no authentic coaching stock available to depict passenger operations of many of the Victorian railway companies, these EFE models give a true feel of train travel from yesteryear and come finished in authentic liveries for some of the pre-Grouping companies that have so far been uncatered for when it comes to ready to run coaching stock. Each model is produced using a high fidelity injection moulded bodyshell adorned with extra details, like the ornate metal handrails that are each separately fitted, the etched metal end steps and the emergency brake gear. Beneath each coach the truss rods have been authentically modelled alongside separate battery boxes, the Westinghouse brake components complete the look. Metal wheelsets are used throughout whilst the NEM coupling pockets are mounted on close-coupling mechanisms fitted to the coach chassis, providing close coupling whilst still allowing the models to negotiate second radius curves. Features: Pristine Caledonian Railway Plum & Off-White livery Running No. 1422 NEM Coupling Pockets Length 236mm (over couplings) - OO Scale

EFE Rail 54ft non-Corridor Third LBSCR Raw Umber

54ft non-Corridor Third LBSCR Raw Umber The EFE Rail 54ft non-Corridor Bogie Coaches are based on the brand’s highly acclaimed Isle of Wight Coaching stock – the prototypes for which were rebuilt from former London, Brighton & South Coast Railway vehicles before their move to the island. With no authentic coaching stock available to depict passenger operations of many of the Victorian railway companies, these EFE models give a true feel of train travel from yesteryear and come finished in authentic liveries for some of the pre-Grouping companies that have so far been uncatered for when it comes to ready to run coaching stock. Each model is produced using a high fidelity injection moulded bodyshell adorned with extra details, like the ornate metal handrails that are each separately fitted, the etched metal end steps and the emergency brake gear. Beneath each coach the truss rods have been authentically modelled alongside separate battery boxes, the Westinghouse brake components complete the look. Metal wheelsets are used throughout whilst the NEM coupling pockets are mounted on close-coupling mechanisms fitted to the coach chassis, providing close coupling whilst still allowing the models to negotiate second radius curves. Features: Pristine LBSCR Raw Umber livery Running No. 2186 NEM Coupling Pockets Length 236mm (over couplings) - OO Scale

EFE Rail 54ft non-Corridor Third S&DJR Lined Blue

54ft non-Corridor Third S&DJR Lined Blue The EFE Rail 54ft non-Corridor Bogie Coaches are based on the brand’s highly acclaimed Isle of Wight Coaching stock – the prototypes for which were rebuilt from former London, Brighton & South Coast Railway vehicles before their move to the island. With no authentic coaching stock available to depict passenger operations of many of the Victorian railway companies, these EFE models give a true feel of train travel from yesteryear and come finished in authentic liveries for some of the pre-Grouping companies that have so far been uncatered for when it comes to ready to run coaching stock. Each model is produced using a high fidelity injection moulded bodyshell adorned with extra details, like the ornate metal handrails that are each separately fitted, the etched metal end steps and the emergency brake gear. Beneath each coach the truss rods have been authentically modelled alongside separate battery boxes, the Westinghouse brake components complete the look. Metal wheelsets are used throughout whilst the NEM coupling pockets are mounted on close-coupling mechanisms fitted to the coach chassis, providing close coupling whilst still allowing the models to negotiate second radius curves. Features: Pristine S&DJR Lined Blue livery Running No. 42 NEM Coupling Pockets Length 236mm (over couplings) - OO Scale  

EFE Rail 54ft non-Corridor Brake Third Caledonian Railway Plum & OffWhite

54ft non-Corridor Brake Third Caledonian Railway Plum & Off-White The EFE Rail 54ft non-Corridor Bogie Coaches are based on the brand’s highly acclaimed Isle of Wight Coaching stock – the prototypes for which were rebuilt from former London, Brighton & South Coast Railway vehicles before their move to the island. With no authentic coaching stock available to depict passenger operations of many of the Victorian railway companies, these EFE models give a true feel of train travel from yesteryear and come finished in authentic liveries for some of the pre-Grouping companies that have so far been uncatered for when it comes to ready to run coaching stock. Each model is produced using a high fidelity injection moulded bodyshell adorned with extra details, like the ornate metal handrails that are each separately fitted, the etched metal end steps and the emergency brake gear. Beneath each coach the truss rods have been authentically modelled alongside separate battery boxes, the Westinghouse brake components complete the look. Metal wheelsets are used throughout whilst the NEM coupling pockets are mounted on close-coupling mechanisms fitted to the coach chassis, providing close coupling whilst still allowing the models to negotiate second radius curves. Features: Pristine Caledonian Railway Plum & Off-White livery Running No. 1301 NEM Coupling Pockets Length 236mm (over couplings) - OO Scale

EFE Rail 54ft non-Corridor Brake Third LBSCR Raw Umber

54ft non-Corridor Brake Third LBSCR Raw Umber The EFE Rail 54ft non-Corridor Bogie Coaches are based on the brand’s highly acclaimed Isle of Wight Coaching stock – the prototypes for which were rebuilt from former London, Brighton & South Coast Railway vehicles before their move to the island. With no authentic coaching stock available to depict passenger operations of many of the Victorian railway companies, these EFE models give a true feel of train travel from yesteryear and come finished in authentic liveries for some of the pre-Grouping companies that have so far been uncatered for when it comes to ready to run coaching stock. Each model is produced using a high fidelity injection moulded bodyshell adorned with extra details, like the ornate metal handrails that are each separately fitted, the etched metal end steps and the emergency brake gear. Beneath each coach the truss rods have been authentically modelled alongside separate battery boxes, the Westinghouse brake components complete the look. Metal wheelsets are used throughout whilst the NEM coupling pockets are mounted on close-coupling mechanisms fitted to the coach chassis, providing close coupling whilst still allowing the models to negotiate second radius curves. Features: Pristine LBSCR Raw Umber livery Running No. 4935 NEM Coupling Pockets Length 236mm (over couplings) - OO Scale

EFE Rail 54ft non-Corridor Brake Third S&DJR Lined Blue

54ft non-Corridor Brake Third S&DJR Lined Blue The EFE Rail 54ft non-Corridor Bogie Coaches are based on the brand’s highly acclaimed Isle of Wight Coaching stock – the prototypes for which were rebuilt from former London, Brighton & South Coast Railway vehicles before their move to the island. With no authentic coaching stock available to depict passenger operations of many of the Victorian railway companies, these EFE models give a true feel of train travel from yesteryear and come finished in authentic liveries for some of the pre-Grouping companies that have so far been uncatered for when it comes to ready to run coaching stock. Each model is produced using a high fidelity injection moulded bodyshell adorned with extra details, like the ornate metal handrails that are each separately fitted, the etched metal end steps and the emergency brake gear. Beneath each coach the truss rods have been authentically modelled alongside separate battery boxes, the Westinghouse brake components complete the look. Metal wheelsets are used throughout whilst the NEM coupling pockets are mounted on close-coupling mechanisms fitted to the coach chassis, providing close coupling whilst still allowing the models to negotiate second radius curves. Features: Pristine S&DJR Lined Blue livery Running No. 134 NEM Coupling Pockets Length 236mm (over couplings) - OO Scale

EFE Rail 54ft non-Corridor Composite Caledonian Railway Plum & Off-White

54ft non-Corridor Composite Caledonian Railway Plum & Off-White The EFE Rail 54ft non-Corridor Bogie Coaches are based on the brand’s highly acclaimed Isle of Wight Coaching stock – the prototypes for which were rebuilt from former London, Brighton & South Coast Railway vehicles before their move to the island. With no authentic coaching stock available to depict passenger operations of many of the Victorian railway companies, these EFE models give a true feel of train travel from yesteryear and come finished in authentic liveries for some of the pre-Grouping companies that have so far been uncatered for when it comes to ready to run coaching stock. Each model is produced using a high fidelity injection moulded bodyshell adorned with extra details, like the ornate metal handrails that are each separately fitted, the etched metal end steps and the emergency brake gear. Beneath each coach the truss rods have been authentically modelled alongside separate battery boxes, the Westinghouse brake components complete the look. Metal wheelsets are used throughout whilst the NEM coupling pockets are mounted on close-coupling mechanisms fitted to the coach chassis, providing close coupling whilst still allowing the models to negotiate second radius curves. Features: Pristine Caledonian Railway Plum & Off-White livery Running No. 460 NEM Coupling Pockets Length 236mm (over couplings) - OO Scale

EFE Rail 54ft non-Corridor Composite LBSCR Raw Umber

54ft non-Corridor Composite LBSCR Raw Umber The EFE Rail 54ft non-Corridor Bogie Coaches are based on the brand’s highly acclaimed Isle of Wight Coaching stock – the prototypes for which were rebuilt from former London, Brighton & South Coast Railway vehicles before their move to the island. With no authentic coaching stock available to depict passenger operations of many of the Victorian railway companies, these EFE models give a true feel of train travel from yesteryear and come finished in authentic liveries for some of the pre-Grouping companies that have so far been uncatered for when it comes to ready to run coaching stock. Each model is produced using a high fidelity injection moulded bodyshell adorned with extra details, like the ornate metal handrails that are each separately fitted, the etched metal end steps and the emergency brake gear. Beneath each coach the truss rods have been authentically modelled alongside separate battery boxes, the Westinghouse brake components complete the look. Metal wheelsets are used throughout whilst the NEM coupling pockets are mounted on close-coupling mechanisms fitted to the coach chassis, providing close coupling whilst still allowing the models to negotiate second radius curves. Features: Pristine LBSCR Raw Umber livery Running No. 6162 NEM Coupling Pockets Length 236mm (over couplings) - OO Scale

Revell Aston Martin DB5 'Goldfinger' CLICK SYSTEM (1:24)

Aston Martin DB5 'Goldfinger' CLICK SYSTEM (1:24) -Innovative click system: No glue required – easy to put together for stable results -Requires cutting from sprue and filling also needed. -True-to-original model from the classic film “Goldfinger” -Extras such as bulletproof armored bulkheads, machine guns and interchangeable license plates can be recreated -Rotating wheels for authentic fun -Can be customized with stickers or decals -Promotes creativity & concentration: Ideal for young model building fans -Step-by-step construction instructions -1:24 scale Background information: The Aston Martin DB5 is considered the most famous film car in the world - and not without reason. In “Goldfinger” (1964), the elegant vehicle first appeared as James Bond’s company car and set a new benchmark for agent technology in the cinema with its sophisticated gadgets. Since then, the DB5 has been closely linked to the 007 mythos and appeared in numerous other Bond films. Its design stands for British elegance, its features for pure action. With this model you can bring a piece of film history straight home - to touch and experience.

Revell RMS Titanic CLICK SYSTEM (1:600)

RMS Titanic CLICK SYSTEM (1:600)   -Innovative click system: No glue required – easy to put together for stable results, requires cutting from sprue with a small amount of filling also needed.    -Multicolored components: Precisely crafted, no painting required -Structured Details: Hull with planking, decks with wooden plank look -Stickers & Decals: For realistic and creative design -Promotes creativity & concentration: Ideal for young model building fans - 1:600 scale history: The R.M.S. Titanic was the largest and most luxurious passenger ship of her time. Launched on April 10, 1912, she was considered unsinkable - until she collided with an iceberg on the night of April 14th and 15th and sank tragically. The Titanic myth still fascinates millions of people worldwide today. With this model you not only bring home a piece of technical history, but you become part of history yourself - when building, understanding and designing.

Airfix Vintage Classics: Prinz Eugen German heavy cruiser (1:600)

Vintage Classics: Prinz Eugen German heavy cruiser  This detailed 1:600 scale naval ship kit allows you to recreate the German heavy cruiser Prinz Eugen, featuring 151 plastic components and offering two genuine paint schemes. Designed for modellers aged 8 and up with a skill level of 3, this kit provides an engaging project of one of the Kriegsmarine's distinguished warships. Key Features: 1:600 scale model with 151 plastic components Skill level 3 - intermediate build complexity Two genuine paint schemes included Suitable for ages 8 years and above Part of the Battle of Bismarck collection Second World War German heavy cruiser History: Prinz Eugen was sent into the North Atlantic alongside the Bismarck to target convoys heading to Great Britain. During the Denmark Strait battle, she inflicted damage on both HMS Hood (later sunk by Bismarck) and HMS Prince of Wales, before making her way to Brest in occupied France. The heavy cruiser Prinz Eugen was named after Prince Eugene of Savoy, an 18th-century Austrian general. As part of the Admiral Hipper-class heavy cruisers, she was a formidable ship equipped with eight 20.3cm guns in four twin turrets, twelve 10.5cm anti-aircraft guns, and twelve 53.3cm torpedo tubes. Commissioned in August 1940, Prinz Eugen became one of the Kriegsmarine's most effective surface raiders. Her most notable action occurred in May 1941 when she joined Bismarck on Operation Rheinübung, aimed at disrupting Allied convoy routes in the Atlantic. During the subsequent encounter in the Denmark Strait, Prinz Eugen's precise gunnery played a role in the devastating attack on HMS Hood, while her shells also hit HMS Prince of Wales. After the battle, she managed to evade British forces and reached the safety of Brest, while Bismarck continued alone to her tragic end. Following repairs and further missions in the Atlantic and Baltic, Prinz Eugen survived the war, surrendered to the Allies in Copenhagen in May 1945, and was later given to the United States Navy as a war prize. She was used in the Operation Crossroads atomic bomb tests at Bikini Atoll in July 1946, surviving both explosions before eventually capsizing in December 1946, where her wreck remains today.

Airfix Vintage Classics: Crash Recovery Set (Queen Mary + Crane)(1:76)

Crash Recovery Set (Queen Mary + crane) Vintage Classics  This 1:76 scale Crash Recovery Set vividly depicts the essential support vehicles that were crucial to RAF operations in the 1940s and 50s. The 147-piece plastic kit features a Bedford Ox tractor with a Queen Mary Trailer and a Thornycroft Amazon equipped with a crane, offering an ideal base for crafting detailed diorama scenes of aircraft recovery and maintenance. Designed for modellers aged 8 and up, this Skill Level 3 kit includes two unique paint schemes and provides endless possibilities for creative scene construction. Key Features: Bedford Ox tractor unit with Queen Mary Trailer designed for moving aircraft fuselages and large components Thornycroft Amazon recovery vehicle with crane for lifting tasks 147 intricately moulded plastic parts reflecting authentic historical details Two paint schemes provided to depict various wartime airfield units Skill Level 3 kit appropriate for modellers aged 8 years and older 1:76 scale - perfect for building dioramas alongside Airfix aircraft model kits Ideal starting point for recreating bustling wartime Maintenance Unit scenes History: The numerous wartime airfields and Maintenance Units spread across the UK were bustling hubs of activity during the 1940s and 50s, capturing the imagination of modellers since the hobby's inception. Recreating these scenes as scale model dioramas has been a cherished activity for years, with this classic Recovery Set offering abundant inspiration for creative modellers. The Bedford Ox was among the most adaptable and dependable vehicles in British military service during World War II. Coupled with the Queen Mary Trailer, named for its considerable size and prestigious cargo, it served as the primary means of transporting dismantled or damaged aircraft between airfields and maintenance sites. The Thornycroft Amazon, with its sturdy crane, was equally vital for lifting tasks, moving engines, and handling significant airframe components during recovery and repair operations. These vehicles were the backbone of RAF ground support, working tirelessly to maintain the operational status of Britain's fighter and bomber squadrons. Whether recovering crashed aircraft from rural areas, transporting newly assembled machines to active squadrons, or moving damaged airframes to Maintenance Units for rebuilding, these recovery teams played a crucial yet often overlooked role in sustaining the RAF's operational capabilities throughout the war and into the post-war era. This classic Airfix set encapsulates the essence of these dynamic airfield scenes, allowing modellers to recreate scenarios such as a dismantled Spitfire or a Vickers Wellington fuselage being transported for repair.

Airfix Vintage Classics: Roman Fort & figures set (1:76)

Vintage Classics: Roman Fort & figures set  Part of the Vintage Classics collection, this Roman Fort and Figurines Set offers a delightful diorama experience at your workbench in a remarkable 1:76 scale. Comprising 119 intricately crafted plastic pieces, this Skill Level 1 kit is ideal for modellers aged 8 and up, providing an engaging yet straightforward assembly that replicates the fortifications that once safeguarded Roman Britain. Key Features: 119 plastic components to construct a detailed Roman fort and figurines 1:76 scale diorama set ideal for depicting scenes from Roman Britain Skill Level 1 assembly suitable for ages 8 and older Part of the Vintage Classics collection Includes fort structures and historical figurines History: Though initially viewed as invaders, the Romans significantly impacted Britain and its lifestyle, introducing law and order, infrastructure, currency, and taxation to a land that, while not as uncivilised as portrayed, gained from increased organisation and structure. Aside from the weather, the Romans appreciated Britain, transforming it into a smaller version of Rome. Before their departure, their network of forts shielded Britain from a series of overseas invaders. They left behind a legacy that continues to benefit Britain today, alongside over 400 years of captivating history.

Airfix Alvis Saracen Mk.5 (1:35)

Alvis Saracen Mk.5 This 1:35 scale model of the Alvis FV603 Saracen Mk.5 is an impressive kit comprising 219 pieces, offering modellers at skill level 3 a challenging and rewarding project with ample scope for detailed customisation. Crafted by the renowned Alvis Company of Coventry, the Saracen armoured personnel carrier was prioritised for production in the late 1940s due to the urgent situation in Malaya. With a crew of two, the FV603 could accommodate ten soldiers in its rear section, with the commander and wireless operator sitting behind the driver, facing forward, while eight soldiers sat opposite each other in two rows along the armoured sides. Key Features: 1:35 scale model with 219 plastic pieces Skill level 3 build suitable for ages 8 and above Three authentic paint schemes representing Cold War era service Highly detailed armoured personnel carrier design Opportunity to add extensive detail throughout the build History: The Alvis Company of Coventry was known for producing prestigious cars in the 1930s, so when they started manufacturing an Armoured Personnel Carrier for the British Army in the late 1940s, it was expected to be both capable and of high quality. Originally planning to produce the Saladin armoured car, the urgent situation in Malaya shifted focus to the FV603 Saracen armoured personnel carrier. Renowned for its excellent off-road capabilities, the Saracen is often associated with images of it patrolling urban areas worldwide, rather than engaging in traditional battlefield scenarios.

Airfix Westland Lysander Mk.III Special Duties (1:48)

Westland Lysander Mk.III Special Duties (1:48) Product Info: This remarkable 1:48 scale model kit of the Westland Lysander Mk.III Special Duties aircraft consists of 197 parts and provides an accurate depiction of one of the RAF's most audacious aircraft used in secret operations. Ideal for modellers aged 8 and up with intermediate skills, this kit replicates the unique alterations made to about 40 Lysander communication planes in 1941 for covert missions aiding the French Resistance. Key Features: -197 piece model kit at 1:48 scale with 316mm wingspan -Skill level 3 - suitable for intermediate modellers aged 8 years and above -Three authentic paint schemes included -Precise depiction of Special Duties modifications including external fuel tank and access ladder -World War Two era RAF aircraft -Detailed features including modified gunner's compartment with rear-sliding canopy -Represents unarmed variant configured for secret agent transport operations History: In 1941, the RAF set a requirement for the modification of around 40 Westland Lysander communication aircraft to undertake a new secretive role, termed 'Special Duties'. The aircraft were stripped of defensive weaponry and had their range extended by installing a larger internal oil tank and an external 150-gallon fuel tank beneath the fuselage. The gunner's section was altered with the addition of a rear-sliding single-piece canopy, allowing space for up to three individuals. A sturdy ladder was attached to the port-side fuselage, enabling swift boarding and disembarking for passengers during their new 'Spy Taxi' missions. Flying under the cover of night and with the assistance of the French Resistance, specialised crews courageously piloted these unarmed planes across the English Channel, transporting agents at significant personal risk to all involved. These operations were vital to the eventual success of the Second World War.  

Airfix Sepecat Jaguar T.2/T.4 (1:48)

Sepecat Jaguar T.2/T.4 (1:48) Product Info: This intricately crafted 1:48 scale model kit showcases the SEPECAT Jaguar T.2 & T.4, the visually striking two-seat training and conversion version of this notable Cold War strike aircraft. Comprising 245 components and featuring a wingspan of 181mm, this Skill Level 4 kit embodies the visual charm of the tandem cockpit design, which made the training Jaguar one of the most aesthetically pleasing aircraft of the Royal Air Force during its time. Offering three distinct paint options, this plastic kit enables you to recreate these proficient training aircraft, which originated from an Anglo-French initiative aimed at developing an advanced jet trainer, eventually evolving into a formidable strike platform with some models adapted for pilot training and conversion purposes. Key Features: -Intricate 1:48 scale model with 245 plastic components -Wingspan of 181mm highlighting the graceful lines of the two-seat Jaguar -Skill Level 4 kit designed for skilled modellers -Includes three genuine paint options -Accurately replicates the tandem cockpit design -Suitable for ages 8 and up -Depicts both T.2 and T.4 training versions History: The SEPECAT Jaguar began as a collaborative Anglo-French endeavor to create an advanced jet training aircraft for both countries. Over time, the Jaguar transformed into a highly effective strike aircraft, with certain models further developed for pilot training and conversion duties. Renowned for its appealing design, the tandem cockpit of the two-seat Jaguars enhanced their aesthetic allure, with many enthusiasts considering the training variant of the Jaguar to be among the most attractive Royal Air Force aircraft from the Cold War period.   BAE SYSTEMS is a registered trade mark of BAE Systems plc.

Airfix Bristol Blenheim Mk.1F (1:48)

Bristol Blenheim Mk.1F  This detailed 1:48 scale model kit comprises 216 parts and provides an accurate depiction of this significant RAF light bomber and night-fighter. Enthusiasts can construct one of the 200 Blenheims adapted with unique ventral gun packs, containing four forward-firing 0.303 machine guns, turning these planes into effective long-range fighter versions. Key Features: 1:48 scale model kit with 216 parts Skill level 2 - suitable for ages 8 and above 370mm wingspan when assembled Option of three genuine paint schemes Detailed ventral gun pack with four forward-firing machine guns Precisely moulded plastic parts capture the iconic Blenheim silhouette History: When global conflict began in September 1939, the Royal Air Force had more Bristol Blenheims in service than any other aircraft type, and they played a major role in the intense air battles. Primarily used as light bombers, approximately 200 Blenheims were converted into long-range fighter/night-fighters, fitted with ventral packs on their undersides, each containing four forward-firing 0.303 machine guns. The production of these custom components, along with their mounting frames, was outsourced to Southern Railway's workshops at their Ashford location in Kent, highlighting the cooperative industrial effort that defined Britain's wartime aircraft production. These modified Blenheim Mk.IF fighters performed admirably in the early war years, filling the gap until specialised night-fighters were available. The Bristol Blenheim marked a significant leap in RAF capabilities upon its introduction in 1937, being faster than the biplane fighters of the time. Although quickly surpassed by rapid wartime advancements in aircraft design, the Blenheim's adaptability ensured its continued frontline service during the early war years, operating in nearly every theatre from Britain to North Africa and the Far East. BAE SYSTEMS is a registered trade mark of BAE Systems plc.

Airfix Twin pack Typhoon FGR.4 (FMOG) & Hawker Typhoon (1:72)

Twin pack Typhoon FGR.4 (FMOG) & Hawker Typhoon (1:72) Product Info: This remarkable dual set combines two legendary RAF aircraft models in 1:72 scale, featuring the contemporary Eurofighter Typhoon FGR.4 'Moggy' alongside the historic Hawker Typhoon Mk.Ib that inspired its eye-catching D-Day tribute design. Comprising 117 parts and rated at skill level 2, this dual set is ideal for modellers aged 8 and older, enabling you to recreate both the original 1944 camouflage of No.257 (Burma) Squadron and the stunning 2024 homage on the RAF Display Team's aircraft. Key Features: -Twin pack includes both Eurofighter Typhoon FGR.4 'Moggy' and Hawker Typhoon Mk.Ib in 1:72 scale -117 pieces with skill level 2 build, perfect for modellers aged 8 years and above -Authentic schemes celebrating the 80th anniversary of D-Day -Eurofighter Typhoon features distinctive black and white D-Day identification markings -Wingspan of 153mm on completed Eurofighter model -Recreate the historic 1944 No.257 (Burma) Squadron camouflage scheme -Decals for ZJ913, the RAF Typhoon Display Team aircraft from the 2024 season History: As the nation prepared for the 80th anniversary of D-Day in summer 2024, aviation fans across Britain frequently checked the Royal Air Force Typhoon Display Team's social media for any exciting updates. Indeed, on a rainy Monday in May, the doors of a hardened aircraft shelter (HAS) at RAF Coningsby opened to unveil a stunning Eurofighter Typhoon adorned in 1944 camouflage and identification markings. The striking design on Typhoon FGR.4 ZJ913 was inspired by the RAF No.257 (Burma) Squadron Hawker Typhoon Mk.Ib, piloted by Officer Denzil Jenkins during the D-Day landings on 6th June 1944, featuring the iconic black and white identification stripes that were a hallmark of Allied aircraft over Normandy on D-Day. This was a brilliant move by the RAF PR team, and this aircraft captivated millions during the subsequent airshow season, at commemorative events in both the UK and France, and during a successful Canadian tour. Fans quickly gave this unique aircraft a nickname, and from that initial day at Coningsby, she was known as 'Moggy', a clever nod to the squadron codes she bore, using the roundel as an O. Unfortunately, this appealing aircraft only served as the RAF display Typhoon for one season, but it will be fondly remembered as one of the most beloved RAF aircraft of the post-war period. 'Moggy' can now be a standout piece on your workbench, alongside the aircraft that inspired her design, with both model kits beautifully capturing this extraordinary link between past and present. BAE SYSTEMS is a registered trade mark of BAE Systems plc.

Airfix Twin pack Typhoon FGR.4 (Blackjack) & Tucano T.1 (1:72)

Twin pack Typhoon FGR.4 (Blackjack) & Tucano T.1 (Linton)(1:72) Product Info: This 1:72 scale twin pack features two of the RAF's most iconic display aircraft: the Eurofighter Typhoon FGR.4 'Blackjack' and the Shorts Tucano T.1. Both models showcase bold all-black Aggressor designs with union flag inspired markings and RAF roundels on their tails. Comprising 91 pieces across both kits and rated at skill level 2, this set is perfect for modellers looking to enhance their skills. Key Features: -Twin pack including both Typhoon FGR.4 'Blackjack' and Shorts Tucano T.1 display aircraft -Both aircraft sport unique black schemes with red, white, and blue accents -91 pieces in total across both models -Skill level 2 - suitable for advancing modellers -1:72 scale models appropriate for ages 8 and up -Includes two genuine RAF display aircraft schemes History: Among the specially decorated RAF Typhoon FGR.4 display aircraft over the last decade, ZJ914 was the most enduring on the UK airshow scene and the most patriotic in design. Dressed in a sleek all-black Aggressor scheme, it also featured union flag inspired markings and an RAF roundel on each side of its tail. Regardless of the weather, when this aircraft performed with afterburners lit, it was a spectacle to witness. This scheme was reminiscent of the one used by the RAF Shorts Tucano T.1 display in 2008, which also had a black airframe with red, white, and blue accents to commemorate the 90th anniversary of the Royal Air Force. Two Tucanos were adorned in this style: ZF210 and ZE338, with one acting as a backup should the primary display aircraft be unavailable. The Tucano served as the RAF's basic training aircraft for three decades until its retirement in 2019. Continuing a now well-loved tradition, Typhoon ZJ914 was affectionately nicknamed 'Blackjack' by enthusiasts. The aircraft sported this admired scheme for three complete display seasons and even during the early months of preparation for the 2024 airshow season. Is it any surprise that 'Blackjack' became one of the most beloved aircraft to represent the Royal Air Force in the 21st century? 'Blackjack' and the aircraft that inspired its appearance are now both available to construct in 1:72 scale - an excellent project for modellers beginning to gain confidence in this hobby. BAE SYSTEMS is a registered trade mark of BAE Systems plc.

Scalextric Ford Sierra Sapphire Police Car

Ford Sierra Sapphire Police Car Includes: - DPR - High Detail - Magnatraction - Front Lights - Rear Lights - Compatible with ARC AIR/ARC ONE - Compatible with ARC PRO/Digital (Chip Required) - Compatible with Spark Plug - Easy Change Guide Blade - 1:32 Scale - Flashing Lights Vehicle information: The Ford Sierra Sapphire served widely with UK police forces in the early 1990s, valued for its balance of performance, space and reliability.  This version reflects a typical traffic patrol car of the era, finished in bright white with high-visibility stripes, force crests, and a period-correct red-and-blue light bar.  The clean lines of the Sapphire suit the livery well, giving it that unmistakable British motorway-police look. Scaled down for the slot track, it keeps the distinctive details that made these cars so recognisable on UK roads.  From the grille badges to the reflective side markings, it offers a neat slice of 1990s policing — ideal for collectors who enjoy classic patrol vehicles or want to add more variety to their street-scene layouts.  

Scalextric Ford RS200 Pat Doran

Ford RS200 Pat Doran Includes: - DPR - High Detail - Magnatraction - Front Lights - Rear Lights - Compatible with ARC AIR/ARC ONE - Compatible with ARC PRO/Digital (Chip Required) - Compatible with Spark Plug - Easy Change Guide Blade - 1:32 Scale Vehicle information: Pat Doran’s Ford RS200 is one of the most recognisable cars in British Rallycross, wearing its bold blue, cream, and striped livery with real presence. Doran campaigned the RS200 through the late ’80s and early ’90s, taking the explosive Group B machine into a new era of short-course, high-intensity racing where its brutal power and compact footprint made it a perfect fit.  This Scalextric version recreates the car as it appeared in the period, complete with its distinctive colour scheme, wide stance, and Rallycross-spec details. The RS200’s purposeful nose, large rear wing, and dramatic side profile are all faithfully represented, making it a standout piece for anyone who enjoys classic Ford competition cars.  A great addition for collectors of Group B icons, British Rallycross history, or those who appreciate one of the most exciting cars Ford ever produced.  

Scalextric Captain Scarlett SPV - Chrome Edition

Captain Scarlett SPV - Chrome Edition Includes: - DPR - High Detail - Magnatraction - Front Lights - Rear Lights - Compatible with ARC AIR/ARC ONE - Compatible with ARC PRO/Digital (Chip Required) - Compatible with Spark Plug - Easy Change Guide Blade - 1:32 Scale Vehicle information: The Spectrum Patrol Vehicle is one of the most recognisable machines from Captain Scarlet, built for speed, protection, and rapid response on any terrain. Its low, angular shape, heavy armour, and powerful multi-wheel layout made it a key part of Spectrum’s fight against the Mysterons.  This new Chrome Edition follows on from the standard version released in 2025, adding a striking finish that highlights the SPV’s futuristic design and dramatic presence.  This Scalextric model keeps the bold look of the original TV vehicle, including the distinctive front shield, side-mounted driver position, and SPV markings.  With its unique chrome blue livery, it’s a perfect addition for fans of Gerry Anderson’s worlds, collectors of cult TV vehicles, and anyone who enjoys something a little different on their track.  

Hornby Railroad: Royal Mail Travelling Post Office 80331

Railroad: Royal Mail Travelling Post Office 80331 The Traveling Post Office (TPO) has been a fixture on Britain’s railways since mail was first carried on trains in the 1830s.  The sorting of mail in transit gradually reduced in the 21st century as mechanised sorting at depots became commonplace and concerns about the safety of workers carrying out letter-sorting at increased main line speeds. The last TPO using carriages in the UK took place during the night of 9th January 2004. After that, a fleet of Royal Mail-branded Class 325 EMUs continued to carry parcels by rail, but these too ceased in 2024. TPOs could collect and deposit mail on the move by means of lineside apparatus. Several of these vehicles have survived in preservation. This Hornby RailRoad model coach features a working mailbag transfer mechanism. - OO Scale

Scalextric James Bond Lotus Esprit Turbo White - For Your Eyes Only

James Bond Lotus Esprit Turbo White - For Your Eyes Only Includes: -DPR -High Detail -Magnatraction - James Bond in driver seat - 1:32 scale Vehicle information: The Lotus Esprit Turbo from For Your Eyes Only is one of the most memorable Bond cars of the 1980s.  Sleek and sharp-edged, with a stark white livery and red Turbo graphics, it showed a more grounded side of 007 after the gadget-heavy escapades of earlier films.  The Esprit Turbo combined lightweight design with a lively 2.2-litre engine, and its appearance in the movie helped cement it as a true British sports-car icon.    Even without the explosive security system seen on screen, its presence alone made an impact. Our slot car replica of this legendary vehicle could soon be causing espionage chaos on your Scalextric tracks.  

Peco Catalogue (Edition 9 - 2026)

Peco Catalogue 2026 The PECO Product & Modelling Guide is out now and bigger than ever! Updated and expanded to 240 pages (last one was 224 pages) - that's an extra 16 pages-  full of essential information. It is not only a comprehensive guide to a huge range of PECO products and other brands, but also a modelling reference guide, to help with so many modelling techniques. Covering the PECO, Ratio, Wills, Parkside and Modelscene ranges, as well as the publications and Tracksetta templates. Products from the new TT:120 scale are included, as is the expanding Pecoscene Static Grass range and N gauge wagon range.  Explanations and helpful hints and tips on scales and gauges, rail codes, frog descriptions, standard and narrow gauge railways, baseboard building, track-laying, wiring using PECO turnout motors and Smartswitch servos, to operate turnouts and semaphore signals, kit building and painting, and scenic work are all included in this inspirational guide.      

Hornby ZCV 'CLAM' DB973347 Dutch Departmental EWS

ZCV 'CLAM' DB973347 Dutch Departmental EWS These wagons were introduced into BR service in 1989 and utilised redundant MGR hopper wagon chassis, with new, low-sided steel bodies. ‘Clam’ wagons were used in engineering and permanent way trains for carrying ballast, spoil and sleepers. They had fixed sides and ends and were fitted with vacuum brakes. A total of 400 were built and they were given the TOPS code ‘ZCV’.  This highly detailed CLAM Wagon model makes a delightful addition to your freight model railway. - OO Scale

Hornby ZCV 'TOPE' DB970569 Dutch Departmental Transrail

ZCV 'TOPE' DB970569 Dutch Departmental Transrail Also classified ‘ZCV’ or ‘ZDV’ under the TOPS scheme were ‘Tope’ wagons. Introduced in 1988, they were rebuilt from MGR hopper wagon, but had cut-down and welded hopper wagon bodies with a simplified side-bracing. Mainly used for carrying ballast and for spoil disposal in departmental trains, 856 conversions had been completed by the time the last was turned out in 1991.  This highly detailed TOPE Wagon model makes a delightful addition to your freight model railway. - OO Scale

2026 Hornby Wagon

2026 Hornby Wagon Celebrate the year ahead with this striking limited-edition Hornby 2026 Hopper Wagon, finished in a bold, eye-catching red livery. The clean, modern styling is complemented by the crisp ‘2026’ branding along the body sides, making it a standout addition to any layout or collector’s display. - OO Scale

Hornby Railroad: BR Class 37 37501 'Teesside Steelmaster' ROG BS

Railroad: BR Class 37 37501 'Teesside Steelmaster' ROG British Steel Blue Built by English Electric at its Vulcan Foundry in Lancashire, the locomotive this RailRoad model is based on started life in January 1961 as D6705, going new to Stratford depot in London.  After becoming 37005 under TOPS, it was rebuilt as a Class 37/5 in April 1985, which included replacing its EE generator with a new Brush unit, and a complete re-wire, with a consequent renumbering to 37501. It was then painted into its distinctive British Steel pale blue colour scheme, gaining Thornaby Kingfisher motif and British Steel logos. It was then named ‘Teesside Steelmaster’ in 1987.  It was later modified for the proposed Channel Tunnel sleeper ‘Nightstar’ project (which was later aborted) to become a 37/6 in February 1995 and renumbered to 37601. It is currently one of six Class 37s leased by Rail Operations Group from Europhoenix for contracted movement of passenger stock, including EMUs. It was returned to its 1987 guise during a repaint in 2025.  This RailRoad model locomotive is a durable design, perfect for model railway beginners, younger enthusiasts, or anyone who enjoys running their trains daily. - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: BR Class 37 37501 'Teesside Steelmaster'(Sound Fitted)

Railroad: BR Class 37 37501 'Teesside Steelmaster' ROG British Steel Blue (Sound Fitted) Built by English Electric at its Vulcan Foundry in Lancashire, the locomotive this RailRoad model is based on started life in January 1961 as D6705, going new to Stratford depot in London.  After becoming 37005 under TOPS, it was rebuilt as a Class 37/5 in April 1985, which included replacing its EE generator with a new Brush unit, and a complete re-wire, with a consequent renumbering to 37501. It was then painted into its distinctive British Steel pale blue colour scheme, gaining Thornaby Kingfisher motif and British Steel logos. It was then named ‘Teesside Steelmaster’ in 1987.  It was later modified for the proposed Channel Tunnel sleeper ‘Nightstar’ project (which was later aborted) to become a 37/6 in February 1995 and renumbered to 37601. It is currently one of six Class 37s leased by Rail Operations Group from Europhoenix for contracted movement of passenger stock, including EMUs. It was returned to its 1987 guise during a repaint in 2025.  This RailRoad model locomotive is a durable design, perfect for model railway beginners, younger enthusiasts, or anyone who enjoys running their trains daily. Plus, it has been pre-fitted with a DCC sound chip for HM7000 control. - DCC HM7000 TXS Sound Fitted - OO Scale

Hornby The Beatles, The Liverpool Connection:EP Collection Side B

The Beatles, The Liverpool Connection:EP Collection Side B - OO scale

Hornby LNER Flying Scotsman & GWR Pendennis Castle (Australian Tour)

LNER Flying Scotsman & GWR Pendennis Castle (Australian Tour) Train Pack  In 1988, Australia celebrated its bicentenary and, to mark the occasion, the world-famous ‘Flying Scotsman’ was invited to travel from Britain to take part in a series of railtours that were part of the ‘Aus Steam 88’ Festival, arriving in October that year.  Already resident in Western Australia since 1977, in the care of the Pilbara Railway Historical Society, former GWR ‘Castle’ Class 4-6-0 ‘Pendennis Castle’ was moved by road to Perth in early 1989 to operate alongside its one-time rival ‘A3’ Class ‘Pacific’. This unlikely reunion occurred almost 9,000 miles from where a week-long locomotive exchange once took place between the LNER and GWR, in April 1925.  This LNER and GWR Train Pack celebrates that landmark event in Australia 37 years ago in 1989. Featuring OO gauge locomotive model replicas of 'Flying Scotsman' and 'Pendennis Castle', these highly detailed designs include sprung metal buffers and NEM tension lock couplings for smooth rake creation. Add a 21-pin decoder to upgrade to HM7000 control. - DCC Ready 21-Pin Socket - OO Scale

Hornby LNER A4 4498 'Sir Nigel Gresley' w/ Figure (Limited Edition)

LNER A4 4498 'Sir Nigel Gresley' w/ Figure (Limited Edition) (150th Anniversary Collection) The LNER Class A4 Sir Nigel Gresley model locomotive is a limited edition model and part of The Great Railway Engineers Collection. This Collection marks 150 years since Sir Gresley's birth, and this locomotive includes a figure.  With a shiny new blue livery and NEM tension lock couplings, this steam locomotive is a wonderful collector's piece.  Entering service with the LNER as 4498 in Garter blue with streamlined side-skirting and red wheels, this was the 100th Gresley ‘Pacific’ to be built when it emerged from Doncaster Works in October 1937. Allocated to King’s Cross ‘Top Shed’ and used on front-line express services such as the prestigious ‘Coronation’ between London and Edinburgh, ‘SNG’ was built with a single chimney and had stainless steel numbers and letters for the tender added at a general overhaul in January 1939.  After a period in wartime black, when the side-skirts were permanently removed, the locomotive returned to lined Garter blue in March 1947. Painted into BR’s express passenger blue in September 1950, as 60007, it set a post-war steam record speed of 112mph on 23 May 1959. Withdrawn in February 1966, by now in BR green, it was saved for preservation by the A4 Locomotive Society. - DCC Ready 21-Pin Socket - OO Scale

Hornby LMS Streamlined 6220 'Coronation' w/ Figure (Limited Edition)

LMS Streamlined 6220 'Coronation' w/ Figure (Limited Edition) (150th Anniversary Collection) The LMS Streamlined 'Coronation' model locomotive is a limited edition item and part of The Great Railway Engineers Collection. This Collection marks 150 years since Sir Stanier's birth, and this locomotive includes a figure. With a shiny bold red livery and NEM tension lock couplings, this steam locomotive is a must-have for collectors. The ‘Princess Coronation’ Class, also known as the ‘Duchess’ Class, was an enlarged and improved version of William Stanier’s successful ‘Princess Royal’ Class ‘Pacific’. The first ten class members emerged from Crewe Works in a streamlined form during 1937 and five of these were put aside specifically for hauling the prestigious ‘Coronation Scot’ between London Euston and Glasgow Central. These were painted in Caledonian blue and had silver horizontal lining, which matched the carriages they pulled. No. 6220 set a new British steam speed record of 114mph in 1937, but this was beaten by the LNER’s ‘Mallard’ in 1938. Built with a single chimney, 6220 was the last of the original 15 to be fitted with a double blast pipe and chimney in 1944. The locomotive’s streamlined casing was removed in November 1946, and it finished its career in its rebuilt form with smoke deflectors as BR’s 46220 in April 1963. - DCC Ready 21-Pin Socket - OO Scale

Hornby Ruston & Hornsby 88DS No.245030 Glenochil Yeast Factory

Ruston & Hornsby 88DS No.245030 Glenochil Yeast Factory Display the bold logo of Glenochil Yeast Factory on this 88DS model locomotive. This diesel features NEM tension lock couplings and a lovely green livery.  The 80/88hp Ruston & Hornsby 4wDM was a reliable machine and ideal for the modest demands of smaller industrial concerns. Several found use in Scotland shunting rail-connected whisky distillery yards – in this case the yeast factory alongside the distillery of the same name, located just south of Menstrie in Clackmannanshire, where sidings connected with the Cambus-Alva branch line.  Works No. 245030 was built in 1947 and worked the factory yard until 1969, when it was sold to William Kerr Ltd in Stirling. It moved to Babcock & Wilcox Ltd., boiler makers in Renfrew, in 1971, where it remained until about 1978, then presumably scrapped. - DCC Ready 6-Pin Socket - OO Scale

Hornby Dublo: English Electric DP1 'Deltic' NRM Preserved

Hornby Dublo: English Electric DP1 'Deltic' NRM Preserved The BR English Electric DP1 'Deltic' is always a favourite model, and with its new blue livery, this OO gauge diesel engine is sure to be just as popular. This version features sprung metal buffers, NEM tension lock couplings and a coreless motor. It is also DCC-ready with a 21-pin socket for easy HM7000 conversion. Features include: High detail OO gauge model based on extensive research Presented as on display in Locomotion, Shildon, with grey chassis, steps and buffers; and horns removed Heavy, fully die-cast chassis and body Highly detailed cab interior Decorated driver controls with illuminated instrument dials Directional head and tail lighting Optional working Mars lights Working cab lights Engine bay lighting Physical switches on blanking plug to control the various lighting configurations Magnetic roof cover to access 21-Pin DCC socket Dual working roof fans, with manually adjustable speed controls Separately fitted etched window frames Large, powerful coreless motor with two flywheels for smooth running Dual bogie drive Sprung metal buffers Front and rear NEM coupling pocket Additional lamps supplied in the accessory bag Hand painted driver figures Supplied with 8 finely decorated etchings, including Locomotion headboard Decorated engine bay featuring printed ‘Napier Deltic’ plates Pre-fitted with a sugar cube speaker for easy digital conversion Space inside for HM7000 Enhanced Bass Speaker Space inside fuel tank for HM7070 - Power Bank Flange squeal sensor mounted in the bogies automatically detects when it is going round a curve to play flange squeal sounds dependant on speed. (Feature available once product is fitted with a HM7000 decoder) Fitted to display plinth with etched presentation plate Fully compatible with Hornby HM7000 app control system, with meticulously crafted Deltic sound profile (SD049) available for download. - DCC Ready 21-Pin Socket - OO Scale

Hornby LNER A4 4468 'Mallard' LNER Garter Blue (Sound/Smoke Fitted)

LNER A4 4468 'Mallard' LNER Garter Blue (Sound/Smoke Fitted) One of the most famous of all steam locomotives, ‘Mallard’ still holds the world speed record for steam. In July 1938, it reached 126mph on Stoke Bank. Entering service in March of that year in LNER Garter blue, it had full side valances and red wheels, as depicted by our highly detailed model. It was renumbered 22 in 1946, by which time it carried wartime plain black. When it was withdrawn from King’s Cross in April 1963, it was in lined BR green and numbered 60022. The locomotive is preserved in its original livery at the National Railway Museum in York. 'Mallard' has always been one of our most popular models. In 2026, we have given the A4 a tooling update and the model now includes the new Hornby steam generator technology, working headlights and tender lights. Specific to R30551SS Running number 4468 Lined Garter Blue livery Non-corridor tender Double chimney arrangement Valanced streamline body made from die-cast metal LHD cab arrangement Working headlights Working tender lights Common Class A4 features High detail OO gauge model based on extensive research and original works drawings Die-cast chassis and boiler High detail cab and fully decorated backhead with decorated instrument dials Pre-fitted 21-pin HM7000 decoder and speaker. The decoder is compatible with NMRA DCC controllers, HM7000 APP control and has the Class A4 sound profile pre-installed for accurate locomotive sounds, synchronised with the chuff rate. Pre-fitted steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Adjustable steam output settings via the decoder HM7000 Power Bank compatible Powerful 5 pole skew wound motor Illuminated flickering firebox Quick release locomotive to tender connector Pogo pin wheel pickup arrangement for easy pickup servicing Electrical pickups on main drive wheels and tender wheels Fully decorated crew figures Turned brass safety valve Prototypical size metal handrails with brass stanchions Brass main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Separately fitted simulated coal load. - DCC HM7000 TXS Sound Fitted w/ Smoke - OO Scale

Hornby LNER B12 61516 BR Lined Black (Late)

LNER B12 61516 BR Lined Black (Late)  A shining replica of the BR B12 Class, this OO gauge model is highly detailed, with sprung metal buffers and NEM tension lock couplings. Upgrade to HM7000 with a 21-pin decoder (sold seperately).  Stephen D Holden designed the ‘S69’ inside cylinder 4-6-0s for the Great Eastern Railway. First introduced in 1911, it was the last of 71 built before the Grouping appeared in 1921. However, a further ten were constructed by Beyer, Peacock for the LNER in 1928, by which time they had been designated the ‘B12’ Class.  Built at Stratford Works in 1913, 1516 entered traffic on GER expresses out of London’s Liverpool Street station in the November. In 1924, it was renumbered 8516, then 1516 under the LNER’s 1947 renumbering scheme. A year later it became BR’s 61516 and was withdrawn from Cambridge in July 1958. - DCC Ready 8-Pin Socket - OO Scale

Hornby LNER B12 8572 LNER Apple Green

LNER B12 8572 LNER Apple Green  This locomotive was one of the final batch of ten ‘B12s’ built by Beyer, Peacock in Manchester in 1928. It was renumbered 1572 by the LNER in 1946, but soon became BR’s 61572 in 1948.  Withdrawn from Norwich Thorpe in September 1961, it was acquired by the Midland & Great Northern Joint Railway Society and moved to the nascent North Norfolk Railway at Sheringham in 1967, where, since completion of its overhaul in 1995, it has been a mainstay of heritage services.  The original is currently out of ticket, undergoing overhaul, so the model is presented in as-preserved condition – the only surviving example of a British inside-cylinder 4-6-0. This highly detailed model features sprung metal buffers and NEM tension lock couplings for effortless rake-building. - DCC Ready 8-Pin Socket - OO Scale  

Corgi Ford Fiesta Mk2 1.1L, Citrine Yellow (1:43)

Ford Fiesta Mk2 1.1L, Citrine Yellow The Fiesta modelled was supplied new by Ford main dealers Gilbert Rice Ltd, Sussex, and first registered on 31st January 1986. Its first four owners looked after it very well and used it sparingly. In the summer of 2016, it was offered for sale by well-known classic car dealers KGF Classic Cars, having covered 40,679 miles.  The mileage was confirmed by an accompanying history file containing a brochure, invoices and previous MOT certificates, as well as the original service wallet and handbook. Remarkably, the car’s grey ‘Fife’ trim was perfect, and it also still boasted its original dealership-stamped number plates, which is unusual as these often get damaged in low-speed parking incidents. It was purchased on 26th July 2016 by lifelong Mk2 Fiesta enthusiast Christian ‘Bisty’ Dann, a restaurateur from Cornwall who has grown up in a family that are passionate about classic cars. He christened her ‘Geraldine’ and created a popular TikTok account called ‘geraldinethefiesta’, which features films about Geraldine’s adventures in Cornwall and Bisty’s other classic, an American-built 1974 GMC van he uses to offer grilled cheese delicacies to the people of Falmouth.  In 2020, Geraldine needed some welding to pass her MOT and Bisty decided to have new sills fitted on both sides by local specialist Perranwell Garage, who also carried out some major engine work and various other jobs in order to make her as good as new in every respect. - 1:43 Scale

Corgi Ford Escort Mk2 RS2000, Carnival Red (1:43)

Ford Escort Mk2 RS2000, Carnival Red -1:43 This die-cast model is based on one of the oldest surviving UK-market examples of an RS2000, which was manufactured in Saarlouis, Germany, in December 1975. The first owner was Mike Collins, then RAF personnel, based at RAF Dishforth, Thirsk, North Yorkshire. He purchased it from the Ford RS dealership, Polar Service Garage, Barnsley on 12th January 1976, then registered it the following day.  It had ten further owners before the current custodian, well known North Wales-based Ford enthusiast Aled Hopwood, purchased it on 7th June 1996. He wasn’t initially aware of its rarity but was captivated by it and has amassed a comprehensive history file containing all the previous MOTs and tax discs, plus a list of previous owners. The car had covered 73,000 miles and was in excellent condition, and Aled enjoyed using it on several European tours, as well as the North Wales Snowdonia Tours and Lakes Tours. It was featured extensively in the book ‘Factory-Original Sporting Mk2 Escorts’, by Dan Williamson, with many detailed photographs of the car by Simon Clay being included in the RS2000 chapter. It has also appeared in Classic Ford Magazine.  In the summer of 2021, Aled embarked on a nut-and-bolt restoration to as-new condition. He returned the underside to its original dove grey paint before having it fully resprayed, although all the original panels and Beta Cloth interior were retained.  Aled proudly showed the finished car at the 2021 NEC Classic Motor Show.

Bat Boat With Batman & Robin (Reissue) Corgi Toys 107

Corgi Toys 107 - Bat Boat With Batmobile & Robin (Reissue) (1:46) Introduced into the CORGI range in 1967 – after the Bat Boat appeared in the previous year’s Batman movie – the problem of hitching the iconic boat to CORGI’s original 1966 Batmobile (which didn’t have a tow-hook) was solved by a small plastic sleeve that fitted neatly over the Batmobile’s turbo exhaust. Based on CORGI’s existing Dolphin 20 Cabin Cruiser on a die-cast trailer (that was hitched to a Buick Riviera in Gift Set 31), the early CORGI Bat Boat can be distinguished from the later ‘Whizzwheels-era’ version by the graphics and Batman logo on the fin, flame graphics on the sides of the hull and a beacon cage between the Batman and Robin figures.

Oxford Diecast Austin Mini Metro - British School of Motoring (1:76)

Austin Mini Metro - British School of Motoring Oxford’s Austin Mini Metro adds a bit of variety to the mix with this latest BSM livery, a familiar sight on the 1980s roads. How many of we experienced drivers have had to exercise patience when behind one of these in its day? Learner drivers of the 1980s would have found the Austin Mini Metro a very easy car to test their ability. It came as a 3-door hatchback - the subject of our Oxford tooling – or a 5 door model. The engine size was either a 1.0L or 1.3L with a 4-speed manual gearbox. The Mini Metro had front wheel drive and a top speed of 84 mph and if you were practising three point turns, reversing round corners or parking, it was very compact and easy to park, so was a particular favourite. The livery is pure nostalgia! The bright red body colour has a wide blue and white flash along the sides incorporating an outline of the map of Great Britain with white BSM lettering beneath. The red roof features the BSM L Driver beacon while along the line of the boot is their famous slogan Every SEVEN minutes someone passes with BSM. The interior of the car is moulded in black and it is registered KWC 332Y from 1982. The British School of Motoring still exists today although now under the auspices of the Automobile Association, offering driving lessons and instructor training amongst other things. - 1:76 Scale

Oxford Diecast DH Mosquito NF MkII P.G.Wykeham-Barnes. RAF No.23 Sqn. (1:72)

This 1:72 scale Oxford aircraft represents a No. 23 Squadron Mosquito which was deployed to RAF Luqa in Malta. The squadron was the first to use the Mosquito in the Mediterranean, having transferred there in December 1942. Its key role was to perform intruder and bomber escort missions attacking enemy  infrastructure in North Africa and Southern Italy, often flying low and fast. The Mosquito’s versatility played a vital part, with great success. Wing Commander Peter Wykeham-Barnes was the commanding officer at Luqa and was to become one of WWII’s famous Bomber Aces, surviving the conflict and highly decorated too. Born on 13 September 1915 in Sandhurst, Surrey, Peter Wykeham-Barnes joined the RAF as an aircraft apprentice in 1932. Later he became a cadet at RAF College, Cranwell and was commissioned in 1937. After a series of deployments at home and abroad, he took over 23 Squadron on Mosquito II night intruders, leading the unit out to Malta. Whilst with 23 Squadron his navigator was 116970 Flying Officer Geoffrey Ernest Palmer, DFC. Together, they were a formidable team with great successes against the Luftwaffe. Wykeham-Barnes ended the war with 3 and 1 shared biplane victories and a total of 14 and 3 shared destroyed. Post-war, he took an Air Ministry post followed by secondment to the USAF in Korea, where he flew night intruder sorties in B-26 Invaders of the 90th Bomber Group, USAF, and was awarded the US Air Medal.  He ended his career in UK defence  as Deputy Chief of the Air Staff and retired as Air Marshal Sir Peter Wykeham, KCB, DSO and Bar, OBE, DFC and Bar, AFC.  He died on 23 February 1995. With so much history behind it, our heroic model appears decorated in the night fighter garb of dark grey and dark green upper side and matt black underside with matt black nose, dorsal patch, guns and rear tyres. On the upper side, the No Step warning signs in red indicate the fragility of the structure in the area between the two engines which would not support any weight.  Also in red are the aircraft identity markings DZ230 and YP-A along the length of the fuselage. The RAF roundel also features a yellow outer circle to make it more easily visible to other friendly aircraft. The island of Malta was awarded the George Cross for its bitter battles against the enemy during WWII and without doubt the DH Mosquito played a great part in its success. - 1:72 Scale

Graham Farish GWR 'Modified Hall' 6960 'Raveningham Hall' GWR L/Green (SF) (N)

GWR 'Modified Hall' 6960 'Raveningham Hall' GWR Lined Green (Sound Fitted) The Great Western Railway (GWR) was famous for its variety of 4-6-0 steam locomotive classes, and none were more numerous and successful than the 49XX ‘Hall’ Class. The type was later developed to create the 6959 ‘Modified Hall’ Class which continued the successes of the ‘Halls’, operating from the final years of the GWR and throughout the British Railways period until steam ended on the Western Region in December 1965 yet N scale models of these iconic machines have never been produced, until now! Developed alongside the brand new ‘Halls’ for the Graham Farish range, these masterpieces in miniature have been created through extensive research and detailed surveys of the preserved locomotives, of which there are several. The mixed traffic machines were found across the GWR network and beyond. Constructed from a multitude of high-fidelity parts and decorated with an exquisite paint finish, the new Graham Farish ‘Modified Hall’ has an impressive technical specification to match. Employing a powerful coreless motor to drive the wheels through a diecast metal gearbox, electrical pickup comes from all driving and tender wheels and separate metal bearings are fitted to the driving wheel axles assuring smooth and reliable running. The tender houses a speaker and Next18 DCC decoder socket, making it easy to add sound Details: Locomotive is Preserved Pristine GWR Lined Green (Great (crest) Western) Livery Running No. 6960 Named ‘Raveningham Hall’ Collett 4,000-gallon Tender GWR Smokebox Door without Numberplate Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Speaker installed in the tender of all models for optimum sound reproduction Length 141mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater - N Scale

Graham Farish GWR 'Modified Hall' 6960 'Raveningham Hall' GWR Lined Green (N)

GWR 'Modified Hall' 6960 'Raveningham Hall' GWR Lined Green The Great Western Railway (GWR) was famous for its variety of 4-6-0 steam locomotive classes, and none were more numerous and successful than the 49XX ‘Hall’ Class. The type was later developed to create the 6959 ‘Modified Hall’ Class which continued the successes of the ‘Halls’, operating from the final years of the GWR and throughout the British Railways period until steam ended on the Western Region in December 1965 yet N scale models of these iconic machines have never been produced, until now! Developed alongside the brand new ‘Halls’ for the Graham Farish range, these masterpieces in miniature have been created through extensive research and detailed surveys of the preserved locomotives, of which there are several. The mixed traffic machines were found across the GWR network and beyond. Constructed from a multitude of high-fidelity parts and decorated with an exquisite paint finish, the new Graham Farish ‘Modified Hall’ has an impressive technical specification to match. Employing a powerful coreless motor to drive the wheels through a diecast metal gearbox, electrical pickup comes from all driving and tender wheels and separate metal bearings are fitted to the driving wheel axles assuring smooth and reliable running. The tender houses a speaker and Next18 DCC decoder socket, making it easy to add sound Details: Locomotive is Preserved Pristine GWR Lined Green (Great (crest) Western) Livery Running No. 6960 Named ‘Raveningham Hall’ Collett 4,000-gallon Tender GWR Smokebox Door without Numberplate Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Speaker installed in the tender of all models for optimum sound reproduction Length 141mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater - N Scale

Graham Farish GWR 'Modified Hall' 7904 'Fountains Hall' BR Lined Black (N)

GWR 'Modified Hall' 7904 'Fountains Hall' BR Lined Black The Great Western Railway (GWR) was famous for its variety of 4-6-0 steam locomotive classes, and none were more numerous and successful than the 49XX ‘Hall’ Class. The type was later developed to create the 6959 ‘Modified Hall’ Class which continued the successes of the ‘Halls’, operating from the final years of the GWR and throughout the British Railways period until steam ended on the Western Region in December 1965 yet N scale models of these iconic machines have never been produced, until now! Developed alongside the brand new ‘Halls’ for the Graham Farish range, these masterpieces in miniature have been created through extensive research and detailed surveys of the preserved locomotives, of which there are several. The mixed traffic machines were found across the GWR network and beyond. Constructed from a multitude of high-fidelity parts and decorated with an exquisite paint finish, the new Graham Farish ‘Modified Hall’ has an impressive technical specification to match. Employing a powerful coreless motor to drive the wheels through a diecast metal gearbox, electrical pickup comes from all driving and tender wheels and separate metal bearings are fitted to the driving wheel axles assuring smooth and reliable running. The tender houses a speaker and Next18 DCC decoder socket, making it easy to add sound Details: Pristine BR Lined Black (Early Emblem) Livery Running No. 7904 Named ‘Fountains Hall’ Collett 4,000-gallon Tender BR Smokebox Door with Numberplate and Shedplate Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Speaker installed in the tender of all models for optimum sound reproduction Length 141mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater - N Scale

Graham Farish GWR 'Modified Hall' 7904 'Fountains Hall' BR Lined Black (SF)(N)

GWR 'Modified Hall' 7904 'Fountains Hall' BR Lined Black (Sound Fitted) The Great Western Railway (GWR) was famous for its variety of 4-6-0 steam locomotive classes, and none were more numerous and successful than the 49XX ‘Hall’ Class. The type was later developed to create the 6959 ‘Modified Hall’ Class which continued the successes of the ‘Halls’, operating from the final years of the GWR and throughout the British Railways period until steam ended on the Western Region in December 1965 yet N scale models of these iconic machines have never been produced, until now! Developed alongside the brand new ‘Halls’ for the Graham Farish range, these masterpieces in miniature have been created through extensive research and detailed surveys of the preserved locomotives, of which there are several. The mixed traffic machines were found across the GWR network and beyond. Constructed from a multitude of high-fidelity parts and decorated with an exquisite paint finish, the new Graham Farish ‘Modified Hall’ has an impressive technical specification to match. Employing a powerful coreless motor to drive the wheels through a diecast metal gearbox, electrical pickup comes from all driving and tender wheels and separate metal bearings are fitted to the driving wheel axles assuring smooth and reliable running. The tender houses a speaker and Next18 DCC decoder socket Details: Pristine BR Lined Black (Early Emblem) Livery Running No. 7904 Named ‘Fountains Hall’ Collett 4,000-gallon Tender BR Smokebox Door with Numberplate and Shedplate Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Speaker installed in the tender of all models for optimum sound reproduction Length 141mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater - N Scale

Bachmann BR FVX Carflat Wagon BR Blue 'Motorail' 'B745075'

BR FVX Carflat Wagon BR Blue 'Motorail' 'B745075' Carflat Wagons allowed cars to be transported by rail, a practice that had started during the early twentieth century, but which became more common after World War Two as more families began realising the dream of owning their own motor vehicle. Many were built from old coach underframes that had had their bodies scrapped, with the type really coming to the fore in 1966 when British Rail launched its Motorail service, providing British holidaymakers with long distance train services where they could take their car on holiday with them, giving the convenience of independent transport whilst on holiday but without the long drive to get there. This Bachmann Branchline model depicts a BR-built Carflat, which to all intents and purposes is a standard BR Mk1 coach underframe running on a pair of BR B1 bogies. The deck of the vehicle is planked, and low side railings are fitted to prevent vehicles from accidentally driving off the side. Like a Mk1 coach, the underside of the vehicle is not overly populated but still features the typical truss frame along with vacuum brake cylinders and, unlike Mk1 coaches, has hand brake levers.     Details: Pristine BR Blue ‘Motorail’ livery Running No. B745075 Features: Accessory Pack NEM Coupling Pockets Length 270mm - OO Scale

Bachmann Class 150/1 2-Car DMU 150101 Northern

Class 150/1 2-Car DMU 150101 Northern The Class 150 Diesel Multiple Unit (DMU) is an enduring design, first introduced in 1984 much of the fleet remains in service today with operators including Northern Trains. The distinctive blue and white livery of Northern makes a return to the Branchline Class 150 DMU, this time on a Class 150/1 as classmate 150101. Constructed from a highly detailed bodyshell which is adorned with separate components like the cab front handrails, roof ariels and exhaust, the Branchline model replicates the Class 150/1 faithfully. This announcement is also the first time we have produced Class 150/1’s with an accessible toilet in the DMSL, as signified by the blanked off toilet window on one side. The underframe boasts a suite of parts to depict the engine, drive train, electrical gear and auxiliary equipment, while inside the model, passenger seating is included along with cab detail. The livery application, using authentic colours and accurate typefaces and logos just enhances the model’s good looks, while the powerful and smooth drive mechanism and plug and play DCC compatibility makes the Class 150 DMU the perfect addition to any modern OO scale collection. This model is a sales area exclusive and is only available from stockists in Scotland and Northern England. Details: Pristine Northern livery Running No. 150101 Comprises Car Nos. 52101 and 57101 Destination Blinds for Buxton Features: Accessory Pack NEM Coupling Pockets Powerful 5 Pole Motor with Flywheel Interior Detailing and Lighting Directional Lighting Equipped with one 21 Pin DCC Decoder Socket – recommended Decoder 36-557A  Length 540mm - OO Scale

Bachmann Class 150/1 2-Car DMU 150101 Northern (Sound Fitted)

Class 150/1 2-Car DMU 150101 Northern (Sound Fitted) The Class 150 Diesel Multiple Unit (DMU) is an enduring design, first introduced in 1984 much of the fleet remains in service today with operators including Northern Trains. The distinctive blue and white livery of Northern makes a return to the Branchline Class 150 DMU, this time on a Class 150/1 as classmate 150101. Constructed from a highly detailed bodyshell which is adorned with separate components like the cab front handrails, roof ariels and exhaust, the Branchline model replicates the Class 150/1 faithfully. This announcement is also the first time we have produced Class 150/1’s with an accessible toilet in the DMSL, as signified by the blanked off toilet window on one side. The underframe boasts a suite of parts to depict the engine, drive train, electrical gear and auxiliary equipment, while inside the model, passenger seating is included along with cab detail. The livery application, using authentic colours and accurate typefaces and logos just enhances the model’s good looks, while the powerful and smooth drive mechanism and plug and play DCC compatibility makes the Class 150 DMU the perfect addition to any modern OO scale collection. This model is a sales area exclusive and is only available from stockists in Scotland and Northern England. Details: Pristine Northern livery Running No. 150101 Comprises Car Nos. 52101 and 57101 Destination Blinds for Buxton Features: Accessory Pack NEM Coupling Pockets Powerful 5 Pole Motor with Flywheel Interior Detailing and Lighting Directional Lighting Equipped with one 21 Pin DCC Decoder Socket – recommended Decoder 36-557A  Length 540mm - OO Scale

Airfix Bristol Bulldog Mk.IIA (1:48)

Bristol Bulldog Mk.IIA This Bristol Bulldog Mk.IIA is a secret release that will inspire aviation model-makers. This legendary aircraft has three scheme options to choose from, so you can decorate your 1:48 scale model kit in a variety of ways. 3 Scheme Options: A: No.23 Squadron, Royal Air Force Kenley, England, 1931. B: 'C' Flight Commander, No.3 Squadron, Royal Air Force, Abyssinian Crisis, East Africa, 1935. C: No.32 Squadron, Royal Air Force Kenley, England, 1935. - Plastic Kit Requires Glue & Paint to Complete - Skill Level 3 - 138 Pieces - 1:48 Scale

Graham Farish 24T Ore Hopper 'Stanton' Red '4255' (N)

24T Ore Hopper 'Stanton' Red '4255' The 24T Iron Ore hopper was ordered by BR in 1950 and rather unusually, all 1500 to diagram 1/162 were constructed by outside contractors. The Graham Farish model faithfully replicates this historic wagon and is offered here in a vibrant red livery of Stanton. Details: Pristine ‘Stanton’ Livery Running No. 4255 Features: Accessory Pack NEM Coupling Pockets Length 41mm - N Scale

Graham Farish 24T Ore Hopper 'Stanton' Red '4279' (N)

24T Ore Hopper 'Stanton' Red '4279' The 24T Iron Ore hopper was ordered by BR in 1950 and rather unusually, all 1500 to diagram 1/162 were constructed by outside contractors. The Graham Farish model faithfully replicates this historic wagon and is offered here in a vibrant red livery of Stanton. Details: Pristine ‘Stanton’ Livery Running No. 4279 Features: Accessory Pack NEM Coupling Pockets Length 41mm - N Scale

EFE AEC Routemaster RML2270 LT Special Railway Service (1:76)

AEC Routemaster RML2270 LT - Special Railway Service The standard Routemaster bus was an undoubted success story for London Transport (LT), and its integral construction had kept LT at the forefront of new bus innovation. However, by the end of the 1950s, questions were being asked by the wider bus industry about whether a 64 seat double decker was commercially viable long-term, especially as the economics of bus operation became more challenging. Greater capacity was being called for. In 1961 LT ordered 24 new Routemasters, which would have an increased capacity of 72 seats. Like the 64 seaters, these new buses would be engineered by AEC at Southall, with body construction and assembly completed at Park Royal Vehicles. These new vehicles mechanically similar to their shorter cousins, sharing the same engines, brakes, transmission and electrical equipment. However, they were 2ft 4in longer than the standard Routemaster, having a small square window on the upper and lower decks where an additional bay had been added. A further 500 RMLs would be built; the first of this new batch being delivered on 1st July 1965, and the last entering service in February 1968. The RMLs would go on to serve London for the best part of the next four decades, finally being withdrawn from front line service in 2005. In fact, one historian would go as far as saying that the RML was “the most successful Routemaster variant ever devised.” Our model depicts RML2270 (CUV270C), which originally entered London Transport service in November 1965. It is presented in its 1978 condition as allocated to New Cross garage, with solid LT roundels, and working a Special Railway Service linking Waterloo with Paddington, King’s Cross and St Pancras. The new models are based on EFE Road’s refined and updated RML tooling, and now feature such enhancements as bodyside panel lines and highly detailed liveries and advertisements. - 1:76 Scale

EFE AEC Routemaster RML2738 London Buses Route 15A Upton Park (1:76)

AEC Routemaster RML2738 London Buses - Route 15A Upton Park The standard Routemaster bus was an undoubted success story for London Transport (LT), and its integral construction had kept LT at the forefront of new bus innovation. However, by the end of the 1950s, questions were being asked by the wider bus industry about whether a 64 seat double decker was commercially viable long-term, especially as the economics of bus operation became more challenging. Greater capacity was being called for. In 1961 LT ordered 24 new Routemasters, which would have an increased capacity of 72 seats. Like the 64 seaters, these new buses would be engineered by AEC at Southall, with body construction and assembly completed at Park Royal Vehicles. These new vehicles mechanically similar to their shorter cousins, sharing the same engines, brakes, transmission and electrical equipment. However, they were 2ft 4in longer than the standard Routemaster, having a small square window on the upper and lower decks where an additional bay had been added. A further 500 RMLs would be built; the first of this new batch being delivered on 1st July 1965, and the last entering service in February 1968. The RMLs would go on to serve London for the best part of the next four decades, finally being withdrawn from front line service in 2005. In fact, one historian would go as far as saying that the RML was “the most successful Routemaster variant ever devised.” Our model depicts RML2738 {SMK738F), a 1967-built example that started its London Transport career at Hanwell. In May 1985 it was selected to work Route 15 and 15A via Oxford Street, Bank and the Tower of London, and as such received a special livery with a yellow roof band and Route 15 advertising. It is in this condition that we have presented our model, complete with an Upton Park destination. The new models are based on EFE Road’s refined and updated RML tooling, and now feature such enhancements as bodyside panel lines and highly detailed liveries and advertisements. - 1:76 Scale

Oxford Diecast Bedford Ca Ice Cream Van Tonibell (1:76)

Previously modelled in 1:43 scale many ice cream years ago, we at Oxford are delighted to reintroduce our lovely Bedford CA Ice Cream van in the famous bright pink Tonibell livey, this time in the smaller 1:76 scale. The story of Tonibell ice cream goes back to 1937 when Italian born Tony Pignatelli and his Scottish wife founded an ice cream manufacturing business known as Toni’s in a high street shop in the Home Counties. They purchased their first mobile vehicle in 1951 – a bicycle with an ice cream container on the front. A year later they purchased a small van converted to sell ice cream complete with chimes!  Business expanded and changed hands many times over the years, including the name which became Tonibell. At its peak, Tonibell ran 500 vans and 15 ice cream parlours. Of course, the 1960s was also a peak time for the ubiquitous split windscreen CA Van, so this popular little vehicle was a prime choice as an ice cream van.  Here we see it in the bright pink colour scheme with side window hatch decorated with all the frozen delights on offer. The Tonibell cow, complete with cowbell, features all over the van, with the strap line ‘Tonibell dairy ice cream.’ Irresistible!   - 1:76 Scale

Bachmann Class 13 D4502 BR Green (Wasp Stripes) DCC Sound Fitted

Bachmann Branchline OO Scale Era 6 Pristine BR Green (Wasp Stripes) livery Running No. D4502 LMS Pattern Buffers Equipped with two Plux22 DCC Decoder Sockets – recommended Decoder item No. 36-570B (x2) Length 244mm   BACHMANN BRANCHLINE CLASS 13 SPECIFICATION EACH CLASS 13 COMPRISES 1x MASTER UNIT AND 1x SLAVE UNIT, BOTH OF WHICH ARE MOTORISED AND FULLY FUNCTIONAL MECHANISM (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at the cab end of the Master unit and the radiator end of the Slave unit Master and Slave units connect with a rigid coupling bar that fits into NEM362 coupling pockets mounted to integral close coupling mechanisms Auto-Release Couplings fitted at the cab end of the master unit and the radiator end of the slave unit – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater DETAILING (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT, WHERE APPLICABLE): Precision moulded bodyshell and frames/running board with numerous separately fitted parts including footsteps, bonnet grilles and lamp irons Separately applied metal detail parts, including sand boxes and sand pipes, grab handles, windscreen wipers, light conduits and lifting points Authentic outside-framed running gear Frames constructed from multiple components, including separate springs and brake gear allowing full relief detailing Sprung metal buffers Cab interior detailing which includes the control desk, instruments & dials, equipment cabinets and handbrake, all with era-specific decoration Each model supplied with a full set of decorated bufferbeam pipework, master-to-slave pipes and cables, bufferbeam infills and accessory parts including screw-link couplings (cosmetic) LIGHTING – MASTER UNIT: Four fully operational marker lights on the cab end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Master and Slave unit), or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control All marker lights on the Master unit can be turned on/off independent of the Slave unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application Lights fitted to the radiator end are prototypically non-functional LIGHTING – SLAVE UNIT: Four fully operational marker lights on the radiator end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Slave and Master unit), or using an easy access microswitch on Analogue control All marker lights on the Slave unit can be turned on/off independent of the Master unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application DCC (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Plux22 DCC decoder interface Easy-access DCC decoder socket via a removable roof panel – secured by clips for ensured fit and alignment 2-pin connector wire for use between the Master and Slave units to ensure full DCC-functionality Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only SOUND: Two quality speakers employed for optimum sound reproduction, one in the Master unit and one in the Slave unit, fitted to every model as standard SOUND FITTED and SOUND FITTED DELUXE versions come with a pre-installed Zimo MS450P22 DCC Sound Decoder in the Master unit and a Zimo MN330P22 Loco Decoder in the Slave Unit Sound files produced specifically for the Bachmann Branchline Class 13 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied

Bachmann Class 13 D4502 BR Green (Wasp Stripes) Deluxe DCC Sound Fitted

Bachmann Branchline OO Scale Era 6 Pristine BR Green (Wasp Stripes) livery Running No. D4502 LMS Pattern Buffers Equipped with two Plux22 DCC Decoder Sockets – recommended Decoder item No. 36-570B (x2) Length 244mm   BACHMANN BRANCHLINE CLASS 13 SPECIFICATION EACH CLASS 13 COMPRISES 1x MASTER UNIT AND 1x SLAVE UNIT, BOTH OF WHICH ARE MOTORISED AND FULLY FUNCTIONAL MECHANISM (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at the cab end of the Master unit and the radiator end of the Slave unit Master and Slave units connect with a rigid coupling bar that fits into NEM362 coupling pockets mounted to integral close coupling mechanisms Auto-Release Couplings fitted at the cab end of the master unit and the radiator end of the slave unit – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater DETAILING (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT, WHERE APPLICABLE): Precision moulded bodyshell and frames/running board with numerous separately fitted parts including footsteps, bonnet grilles and lamp irons Separately applied metal detail parts, including sand boxes and sand pipes, grab handles, windscreen wipers, light conduits and lifting points Authentic outside-framed running gear Frames constructed from multiple components, including separate springs and brake gear allowing full relief detailing Sprung metal buffers Cab interior detailing which includes the control desk, instruments & dials, equipment cabinets and handbrake, all with era-specific decoration Each model supplied with a full set of decorated bufferbeam pipework, master-to-slave pipes and cables, bufferbeam infills and accessory parts including screw-link couplings (cosmetic) LIGHTING – MASTER UNIT: Four fully operational marker lights on the cab end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Master and Slave unit), or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control All marker lights on the Master unit can be turned on/off independent of the Slave unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application Lights fitted to the radiator end are prototypically non-functional LIGHTING – SLAVE UNIT: Four fully operational marker lights on the radiator end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Slave and Master unit), or using an easy access microswitch on Analogue control All marker lights on the Slave unit can be turned on/off independent of the Master unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application DCC (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Plux22 DCC decoder interface Easy-access DCC decoder socket via a removable roof panel – secured by clips for ensured fit and alignment 2-pin connector wire for use between the Master and Slave units to ensure full DCC-functionality Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only SOUND: Two quality speakers employed for optimum sound reproduction, one in the Master unit and one in the Slave unit, fitted to every model as standard SOUND FITTED and SOUND FITTED DELUXE versions come with a pre-installed Zimo MS450P22 DCC Sound Decoder in the Master unit and a Zimo MN330P22 Loco Decoder in the Slave Unit Sound files produced specifically for the Bachmann Branchline Class 13 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied

Bachmann Class 13 13003 BR Blue - DCC Sound Fitted

Bachmann Branchline OO Scale Era 7 Pristine BR Blue livery Running No. 13003 OLEO Buffers (Master unit, cab end only) / LMS Pattern Buffers (Master unit radiator end, and Slave unit) SOUND FITTED – Fitted with a Zimo MS450P22 DCC Sound Decoder (Master unit) and a Zimo MN330P22 Loco Decoder (Slave unit) – See below for the function list Length 244mm   BACHMANN BRANCHLINE CLASS 13 SPECIFICATION EACH CLASS 13 COMPRISES 1x MASTER UNIT AND 1x SLAVE UNIT, BOTH OF WHICH ARE MOTORISED AND FULLY FUNCTIONAL MECHANISM (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at the cab end of the Master unit and the radiator end of the Slave unit Master and Slave units connect with a rigid coupling bar that fits into NEM362 coupling pockets mounted to integral close coupling mechanisms Auto-Release Couplings fitted at the cab end of the master unit and the radiator end of the slave unit – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater DETAILING (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT, WHERE APPLICABLE): Precision moulded bodyshell and frames/running board with numerous separately fitted parts including footsteps, bonnet grilles and lamp irons Separately applied metal detail parts, including sand boxes and sand pipes, grab handles, windscreen wipers, light conduits and lifting points Authentic outside-framed running gear Frames constructed from multiple components, including separate springs and brake gear allowing full relief detailing Sprung metal buffers Cab interior detailing which includes the control desk, instruments & dials, equipment cabinets and handbrake, all with era-specific decoration Each model supplied with a full set of decorated bufferbeam pipework, master-to-slave pipes and cables, bufferbeam infills and accessory parts including screw-link couplings (cosmetic) LIGHTING – MASTER UNIT: Four fully operational marker lights on the cab end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Master and Slave unit), or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control All marker lights on the Master unit can be turned on/off independent of the Slave unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application Lights fitted to the radiator end are prototypically non-functional LIGHTING – SLAVE UNIT: Four fully operational marker lights on the radiator end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Slave and Master unit), or using an easy access microswitch on Analogue control All marker lights on the Slave unit can be turned on/off independent of the Master unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application DCC (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Plux22 DCC decoder interface Easy-access DCC decoder socket via a removable roof panel – secured by clips for ensured fit and alignment 2-pin connector wire for use between the Master and Slave units to ensure full DCC-functionality Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) SOUND: Two quality speakers employed for optimum sound reproduction, one in the Master unit and one in the Slave unit, fitted to every model as standard SOUND FITTED and SOUND FITTED DELUXE versions come with a pre-installed Zimo MS450P22 DCC Sound Decoder in the Master unit and a Zimo MN330P22 Loco Decoder in the Slave Unit Sound files produced specifically for the Bachmann Branchline Class 13 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied LIVERY APPLICATION: Authentic liveries applied to all models Multiple paint applications employed on each model using BR specification colours Logos, numerals and text added as appropriate using multi-stage tampo printing process, incorporating authentic typefaces, logos and colours SOUNDS F0 - Directional Lights - On / Off (plus Light Switch Sound) F1 - Sound On/Off F2 - Brake F3 - Whistle Toot F4 - Horn F5 - Light Engine Mode/Cold Start (engage F5 before turning F1 On) F6 - Coasting / Engine Idle F7 - Speed Lock F8 - Exhauster (Vacuum Train Brakes) F9 - Flange Squeal (Speed Related) F10 - Guard’s Whistle F11* - Auto-Release Coupling Sequence - Radiator End (Slave Unit) F12* - Auto-Release Coupling Sequence - Cab End (Master Unit) F13 - Buffer Clash F14 - Sanders F15 - Handbrake F16 - Fuel Transfer Pump F17 - Auto Wagon Buffering F18 - Shunting Lights (Master Unit and Slave Unit) F19 - Fade All Sounds F20 - All Radiator End (Slave Unit) Directional Lights Off F21 - All Cab End (Master Unit) Directional Lights Off F22 - Cab Light (Master Unit) F23 - Compressor F24 - On - “I'm Going Under” / Off - “Clear” F25 - Automatic Drain Trap F26 - On - Cab Door Opening / Off - Cab Door Closing F27 - Volume Down F28 - Volume Up *Uncoupling Sequence operates the Auto-Release Couplings, including the movement of the locomotive to release tension from the couplings, disengagement of the couplings, and the movement of the locomotive to prevent coupling up reoccurring, along with associated sound effects.

Bachmann Class 13 13003 BR Blue - Deluxe DCC Sound Fitted

Bachmann Branchline OO Scale Era 7 Pristine BR Blue livery Running No. 13003 OLEO Buffers (Master unit, cab end only) / LMS Pattern Buffers (Master unit radiator end, and Slave unit) SOUND FITTED – Fitted with a Zimo MS450P22 DCC Sound Decoder (Master unit) and a Zimo MN330P22 Loco Decoder (Slave unit) – See below for the function list Length 244mm   BACHMANN BRANCHLINE CLASS 13 SPECIFICATION EACH CLASS 13 COMPRISES 1x MASTER UNIT AND 1x SLAVE UNIT, BOTH OF WHICH ARE MOTORISED AND FULLY FUNCTIONAL MECHANISM (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at the cab end of the Master unit and the radiator end of the Slave unit Master and Slave units connect with a rigid coupling bar that fits into NEM362 coupling pockets mounted to integral close coupling mechanisms Auto-Release Couplings fitted at the cab end of the master unit and the radiator end of the slave unit – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater DETAILING (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT, WHERE APPLICABLE): Precision moulded bodyshell and frames/running board with numerous separately fitted parts including footsteps, bonnet grilles and lamp irons Separately applied metal detail parts, including sand boxes and sand pipes, grab handles, windscreen wipers, light conduits and lifting points Authentic outside-framed running gear Frames constructed from multiple components, including separate springs and brake gear allowing full relief detailing Sprung metal buffers Cab interior detailing which includes the control desk, instruments & dials, equipment cabinets and handbrake, all with era-specific decoration Each model supplied with a full set of decorated bufferbeam pipework, master-to-slave pipes and cables, bufferbeam infills and accessory parts including screw-link couplings (cosmetic) LIGHTING – MASTER UNIT: Four fully operational marker lights on the cab end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Master and Slave unit), or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control All marker lights on the Master unit can be turned on/off independent of the Slave unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application Lights fitted to the radiator end are prototypically non-functional LIGHTING – SLAVE UNIT: Four fully operational marker lights on the radiator end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Slave and Master unit), or using an easy access microswitch on Analogue control All marker lights on the Slave unit can be turned on/off independent of the Master unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application DCC (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Plux22 DCC decoder interface Easy-access DCC decoder socket via a removable roof panel – secured by clips for ensured fit and alignment 2-pin connector wire for use between the Master and Slave units to ensure full DCC-functionality Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) SOUND: Two quality speakers employed for optimum sound reproduction, one in the Master unit and one in the Slave unit, fitted to every model as standard SOUND FITTED and SOUND FITTED DELUXE versions come with a pre-installed Zimo MS450P22 DCC Sound Decoder in the Master unit and a Zimo MN330P22 Loco Decoder in the Slave Unit Sound files produced specifically for the Bachmann Branchline Class 13 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied LIVERY APPLICATION: Authentic liveries applied to all models Multiple paint applications employed on each model using BR specification colours Logos, numerals and text added as appropriate using multi-stage tampo printing process, incorporating authentic typefaces, logos and colours SOUNDS F0 - Directional Lights - On / Off (plus Light Switch Sound) F1 - Sound On/Off F2 - Brake F3 - Whistle Toot F4 - Horn F5 - Light Engine Mode/Cold Start (engage F5 before turning F1 On) F6 - Coasting / Engine Idle F7 - Speed Lock F8 - Exhauster (Vacuum Train Brakes) F9 - Flange Squeal (Speed Related) F10 - Guard’s Whistle F11* - Auto-Release Coupling Sequence - Radiator End (Slave Unit) F12* - Auto-Release Coupling Sequence - Cab End (Master Unit) F13 - Buffer Clash F14 - Sanders F15 - Handbrake F16 - Fuel Transfer Pump F17 - Auto Wagon Buffering F18 - Shunting Lights (Master Unit and Slave Unit) F19 - Fade All Sounds F20 - All Radiator End (Slave Unit) Directional Lights Off F21 - All Cab End (Master Unit) Directional Lights Off F22 - Cab Light (Master Unit) F23 - Compressor F24 - On - “I'm Going Under” / Off - “Clear” F25 - Automatic Drain Trap F26 - On - Cab Door Opening / Off - Cab Door Closing F27 - Volume Down F28 - Volume Up *Uncoupling Sequence operates the Auto-Release Couplings, including the movement of the locomotive to release tension from the couplings, disengagement of the couplings, and the movement of the locomotive to prevent coupling up reoccurring, along with associated sound effects.

Bachmann Class 13 D4502 BR Green (Wasp Stripes)

Bachmann Branchline OO Scale Era 6 Pristine BR Green (Wasp Stripes) livery Running No. D4502 LMS Pattern Buffers Equipped with two Plux22 DCC Decoder Sockets – recommended Decoder item No. 36-570B (x2) Length 244mm   BACHMANN BRANCHLINE CLASS 13 SPECIFICATION EACH CLASS 13 COMPRISES 1x MASTER UNIT AND 1x SLAVE UNIT, BOTH OF WHICH ARE MOTORISED AND FULLY FUNCTIONAL MECHANISM (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at the cab end of the Master unit and the radiator end of the Slave unit Master and Slave units connect with a rigid coupling bar that fits into NEM362 coupling pockets mounted to integral close coupling mechanisms Auto-Release Couplings fitted at the cab end of the master unit and the radiator end of the slave unit – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater DETAILING (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT, WHERE APPLICABLE): Precision moulded bodyshell and frames/running board with numerous separately fitted parts including footsteps, bonnet grilles and lamp irons Separately applied metal detail parts, including sand boxes and sand pipes, grab handles, windscreen wipers, light conduits and lifting points Authentic outside-framed running gear Frames constructed from multiple components, including separate springs and brake gear allowing full relief detailing Sprung metal buffers Cab interior detailing which includes the control desk, instruments & dials, equipment cabinets and handbrake, all with era-specific decoration Each model supplied with a full set of decorated bufferbeam pipework, master-to-slave pipes and cables, bufferbeam infills and accessory parts including screw-link couplings (cosmetic) LIGHTING – MASTER UNIT: Four fully operational marker lights on the cab end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Master and Slave unit), or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control All marker lights on the Master unit can be turned on/off independent of the Slave unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application Lights fitted to the radiator end are prototypically non-functional LIGHTING – SLAVE UNIT: Four fully operational marker lights on the radiator end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Slave and Master unit), or using an easy access microswitch on Analogue control All marker lights on the Slave unit can be turned on/off independent of the Master unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application DCC (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Plux22 DCC decoder interface Easy-access DCC decoder socket via a removable roof panel – secured by clips for ensured fit and alignment 2-pin connector wire for use between the Master and Slave units to ensure full DCC-functionality Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only

EFE AEC Routemaster RCL2256 Southend Transport 121 Service 1

AEC Routemaster RCL2256 Southend Transport 121 Service 1 (1:76) Model includes: - Detailed diecast model - Grille and front headlight detail - Cab and interior parts - Body side branding - Display stand - OO/1:76 Scale

Peco 1960s Semi-Detached Houses (Low Relief Backs) Laser Kit (N)

1960s Semi-Detached Houses (Low Relief Backs) Laser-cut Kit (N) Includes: - Laser cut wood kits with finely rendered detailing - Each kit representing a typical 1960s style semi detached block of two houses, front elevation, rear elevation and complete building. - Can be joined up to create a longer block, terrace. - Front porch can be fitted as an optional extra - Scope for further interior decoration (not provided) - Complement our earlier release of Victorian Houses – kits NB306, NB307, NB308, also in N   Background: During the 1960s, British semi-detached houses reflected a period of post-war recovery and growing suburban prosperity. As Britain rebuilt from wartime damage and expanded its suburbs, demand for affordable family homes surged. Semi-detached houses became the ideal solution — cost-effective, spacious, and suited to modern lifestyles. Built mainly from brick or concrete with simple geometric designs, they often featured large windows, central heating, and private gardens. Unlike the ornate Victorian or interwar styles, 1960s semis embraced functionalism and minimal ornamentation, echoing modernist influences. Many were constructed as part of large housing estates on city outskirts, supported by improved road networks and rising car ownership. These homes symbolised optimism, mobility, and the shift toward suburban living, forming a lasting part of Britain’s mid-20th-century architectural identity.

Peco 1960s Semi-Detached Houses (Low Relief Fronts) Laser Kit (N)

1960s Semi-Detached Houses (Low Relief Fronts) Laser-cut Kit (N) Includes: - Laser cut wood kits with finely rendered detailing - Each kit representing a typical 1960s style semi detached block of two houses, front elevation, rear elevation and complete building. - Can be joined up to create a longer block, terrace. - Front porch can be fitted as an optional extra - Scope for further interior decoration (not provided) - Complement our earlier release of Victorian Houses – kits NB306, NB307, NB308, also in N   Background: During the 1960s, British semi-detached houses reflected a period of post-war recovery and growing suburban prosperity. As Britain rebuilt from wartime damage and expanded its suburbs, demand for affordable family homes surged. Semi-detached houses became the ideal solution — cost-effective, spacious, and suited to modern lifestyles. Built mainly from brick or concrete with simple geometric designs, they often featured large windows, central heating, and private gardens. Unlike the ornate Victorian or interwar styles, 1960s semis embraced functionalism and minimal ornamentation, echoing modernist influences. Many were constructed as part of large housing estates on city outskirts, supported by improved road networks and rising car ownership. These homes symbolised optimism, mobility, and the shift toward suburban living, forming a lasting part of Britain’s mid-20th-century architectural identity.

Peco 1960s Semi-Detached Houses - Laser Kit (N)

1960s Semi-Detached Houses - Laser-cut Kit (N) Includes: - Laser cut wood kits with finely rendered detailing - Each kit representing a typical 1960s style semi detached block of two houses, front elevation, rear elevation and complete building. - Can be joined up to create a longer block, terrace. - Front porch can be fitted as an optional extra - Scope for further interior decoration (not provided) - Complement our earlier release of Victorian Houses – kits NB306, NB307, NB308, also in N   Background: During the 1960s, British semi-detached houses reflected a period of post-war recovery and growing suburban prosperity. As Britain rebuilt from wartime damage and expanded its suburbs, demand for affordable family homes surged. Semi-detached houses became the ideal solution — cost-effective, spacious, and suited to modern lifestyles. Built mainly from brick or concrete with simple geometric designs, they often featured large windows, central heating, and private gardens. Unlike the ornate Victorian or interwar styles, 1960s semis embraced functionalism and minimal ornamentation, echoing modernist influences. Many were constructed as part of large housing estates on city outskirts, supported by improved road networks and rising car ownership. These homes symbolised optimism, mobility, and the shift toward suburban living, forming a lasting part of Britain’s mid-20th-century architectural identity.

Rapido UK Chemical Tank Molasses Tank BSC Unbranded 'No.B43'

Chemical Tank Molasses Tank BSC Unbranded 'No.B43' Chemical Tank Wagon (ex-Ammonium Nitrate) BSC Molasses No. B43 End Door with Discharge Valve Continuous Walkway Large Side Discharge Valve Top Valve Fitted Disc wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale, (OO gauge) UK designed

Rapido UK Chemical Tank Arthur Brown & Co Ltd 'No.922'

Chemical Tank Arthur Brown & Co Ltd 'No.922' Chemical Tank Wagon (ex-Ammonium Nitrate) Arthur Brown & Co. No. 922 Fixed End Door Continuous Walkway Small Side Discharge Valve Disc wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale, (OO gauge) UK designed

Rapido UK Chemical Tank British Bitumen Emulsions ‘Colfix’ 'No.82'

Chemical Tank British Bitumen Emulsions ‘Colfix’ 'No.82' Chemical Tank Wagon (ex-Ammonium Nitrate) British Bitumen Emulsions ?Colfix? No. 82 Steam Coil End Door Continuous Walkway Large Side Discharge Valve Top Valve Fitted Split-spoked wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale, (OO gauge) UK designed  

Rapido UK Chemical Tank British Bitumen Emulsions ‘Colfix’ 'No.88'

Chemical Tank British Bitumen Emulsions ‘Colfix’ 'No.88' Chemical Tank Wagon (ex-Ammonium Nitrate) British Bitumen Emulsions ?Colfix? No. 88 Steam Coil End Door Split Walkway Large Side Discharge Valve Top Valve Fitted Split-spoked wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale, (OO gauge) UK designed  

Rapido UK Chemical Tank Chipman Chemical Co.Ltd 'No.73'

Chemical Tank Chipman Chemical Co.Ltd 'No.73' Chemical Tank Wagon (ex-Ammonium Nitrate) Chipman Chemical Co. Ltd. ?Atlacide? No. 73 Fixed End Door Split Walkway Small Side Discharge Valve Split-spoked wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale, (OO gauge) UK designed  

Rapido UK Chemical Tank Chipman Chemical Co.Ltd 'No.74'

Chemical Tank Chipman Chemical Co.Ltd 'No.74' Chemical Tank Wagon (ex-Ammonium Nitrate) Chipman Chemical Co. Ltd. No. 74 Fixed End Door Split Walkway Small Side Discharge Valve Split-spoked wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale, (OO gauge) UK designed  

Rapido UK Chemical Tank Glasgow Corporation Chemical Department 'No.42'

Chemical Tank Glasgow Corporation Chemical Department 'No.42' Chemical Tank Wagon (ex-Ammonium Nitrate) Glasgow Cop. Chemical Dept. No. 42 Fixed End Door Split Walkway Small Side Discharge Valve Split-spoked wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale, (OO gauge) UK designed      

Rapido UK Chemical Tank Goodall, Bates & Todd 'No.13'

Chemical Tank Goodall, Bates & Todd 'No.13' Chemical Tank Wagon (ex-Ammonium Nitrate) Goodall, Bates & Todd No. 13 End Door with Discharge Valve Split Walkway Small Side Discharge Valve Top Valve Fitted Disc wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale, (OO gauge) UK designed  

Rapido UK Chemical Tank Lion Emulsion 'No.B83'

Chemical Tank Lion Emulsion 'No.B83' Chemical Tank Wagon (ex-Ammonium Nitrate) Lion Emulsions No. B83 Steam Coil End Door Continuous Walkway Large Side Discharge Valve Top Valve Fitted Split-spoked wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale, (OO gauge) UK designed  

Rapido UK Chemical Tank Lion Emulsion 'No.B89'

Chemical Tank Lion Emulsion 'No.B89' Chemical Tank Wagon (ex-Ammonium Nitrate) Lion Emulsions No. B89 Steam Coil End Door Split Walkway Large Side Discharge Valve Top Valve Fitted Split-spoked wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale, (OO gauge) UK designed

Rapido UK Chemical Tank Longmoor Military Railway 'No.AD82620'

Chemical Tank Longmoor Military Railway 'No.AD82620' Chemical Tank Wagon (ex-Ammonium Nitrate) Longmoor Military Railway No. AD82620 Fixed End Door Continuous Walkway Small Side Discharge Valve Disc wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale, (OO gauge) UK designed  

Hornby BR Class 153 153360 Serco Northern Rail

BR Class 153 153360 Serco Northern Rail The Hornby Class 153 No. 153360 is finished in the distinctive Northern Rail livery, representing its appearance during regular service in the north of England. It is DCC ready with a 21-pin decoder socket for easy digital upgrade and fitted with NEM couplings. History: The Northern Rail franchise commenced in December 2004 and inherited its fleet from those of Arriva Trains Northern and First North Western, including a large number of Class 153 single units, of which No. 153360 was one.  Under Northern Rail, the unit saw considerable use in the Carlisle area, including services on the Settle and Carlisle line and the Cumbria coastal line to Barrow-in-Furness.  Arriva Rail North, Northern Rail’s successor from 2016, operated the largest fleet of Class 153 units in the UK. No. 153360 went into storage in late 2021 and was subsequently scrapped. - OO Scale

Hornby GWR Saint Class 2920 'Saint David' BR Lined Black (Early)

GWR Saint Class 2920 'Saint David' BR Lined Black (Early) Of the 77 Saint Class members built by GWR between 1902 and 1913, 2920 ‘Saint David’ was one of the 47 that survived beyond nationalisation of Britain’s railways in 1948. Part of the third batch of 20 to be built in 1907, the locomotive was new to Cardiff Canton shed. It underwent several changes during its career, including the fitting of a superheated boiler in 1909 and outside steam pipes in December 1932. This model is presented in BR livery, the condition in which it operated through to its withdrawal in October 1953, by which point it was one of the last four still in service. This model was developed with the helpful guidance from the Didcot Railway Center who kindly gave us access to their archive of drawings and access to the Lady of Legend locomotive. The Saint class model features a powerful 5 pole skew wound motor, flickering firebox and is designed to be fully compatible with the HM7000 21-Pin decoder for full DCC and sound control. Details Specific to R30403: Running number 2920 BR Black livery. Riveted Churchward Tender Later style curved frame chassis design. Fluted diecast piston rods. Tapered superheated boiler Later Chimney Design Later safety Valve with Top Feeds Common Saint Class Features Features: Diecast Chassis and Running Plate. Model Weight is 341 grams. High detail cab and fully decorated backhead with decorated instrument dials. Etched metal nameplates HM7000 21-Pin sound decoder compatible. HM7000 Power Bank compatible. Powerful 5 Pole Skew wound motor. Illuminated flickering firebox. Quick release locomotive to tender connector. Pogo pin wheel pickup arrangement for easy pickup servicing. Electrical pickups on main drive wheels and tender wheels. Diecast Piston Rods & valve gear. Fully decorated crew figures. Prototypical size metal handrails with brass stanchions. Brass main drive bearings. Sprung metal buffers. Front and Rear NEM coupling pocket. Separately fitted lamps. Lamp code can be changed. Separately fitted simulated coal load. - OO Scale

Peco 'Little Giant' locomotive & Letter Service Train Pack (OO-9)

'Little Giant' Special Edition Ffestiniog Railway Letter Service Train Pack (OO-9) Includes 'Little Giant' Locomotive, Bug Box 3rd, 2x Victorian Bowsider coaches    

Hornby BR Mk2F FO Virgin Trains '3344' (TT)

BR Mk2F FO Virgin Trains '3344' Finished in the striking Virgin Trains red and black livery, this model represents the upgraded first-class accommodation introduced in the late 1990s. Adding a touch of luxury and realism to any West Coast Main Line formation, the model features coach number ‘3344’ and NEM couplings. Pair perfectly with other Virgin Mk2F coaches to form a realistic rake as seen on the West Coast services from the mid-1990s to early 2000s. History: After privatisation, these vehicles were operated as loco-hauled stock by Virgin Trains West Coast and inside had an attractive burgundy moquette trim. The FO (First Class Open) had similar interiors to the SO but fitted out to a higher standard and 2+1 seating. - TT:120 Scale

Oxford Diecast Bedford CA Van - AA (1:76)

Bedford CA Van - AA  Another favourite livery on an equally popular small commercial van – our little 1:76 scale Bedford CA Van is back on the road again with the AA. Registered 845 PMU, the model is decorated in the famous yellow and black livery of the era including its period AA badge. Simple graphics promoting the AA Road Service are printed in black on the sides and the rear and for this release, a roof board is fixed to the front of the black roof, directly above the windscreen. The radiator is masked black with the Bedford name above it and the external trim is both black and silver, while the interior is also moulded in black. - 1:76 Scale

Bachmann Class 66/8 66847 'Terry Baker' Colas Rail Freight (SFD)

Class 66/8 66847 'Terry Baker' Colas Rail Freight (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Colas Rail Freight livery Running No. 66847 Named ‘Terry Baker’ Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original ‘Bug-Eye’ Light Clusters (2-Lamps, Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/8 66850 'David Maidment OBE' Colas Rail Freight

Class 66/8 66850 'David Maidment OBE' Colas Rail Freight The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Colas Rail Freight livery Running No. 66850 Named ‘David Maidment OBE’ Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original ‘Bug-Eye’ Light Clusters (2-Lamps, Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/8 66850 'David Maidment OBE' Colas Rail Freight (SF)

Class 66/8 66850 'David Maidment OBE' Colas Rail Freight (Sound Fitted) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Colas Rail Freight livery Running No. 66850 Named ‘David Maidment OBE’ Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original ‘Bug-Eye’ Light Clusters (2-Lamps, Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/8 66850 'David Maidment OBE' Colas Rail Freight (SFD)

Class 66/8 66850 'David Maidment OBE' Colas Rail Freight (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Colas Rail Freight livery Running No. 66850 Named ‘David Maidment OBE’ Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original ‘Bug-Eye’ Light Clusters (2-Lamps, Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/7 66761 'Wensleydale Railway Association' GBRf (SF)

Class 66/7 66761 'Wensleydale Railway Association' GBRf Europorte (Sound Fitted) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine GBRf ‘Europorte’ livery Running No. 66761 Named ‘Wensleydale Railway Association’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof and Modern Communication Pod Fitted 2 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Wrap-Around Control Panels Revised Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/7 66761 'Wensleydale Railway Association' GBRf (SFD)

Class 66/7 66761 'Wensleydale Railway Association' GBRf Europorte (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine GBRf ‘Europorte’ livery Running No. 66761 Named ‘Wensleydale Railway Association’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof and Modern Communication Pod Fitted 2 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Wrap-Around Control Panels Revised Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale