Bachmann GCR 9J (J11) 64305 BR Black (Early Emblem) (Sound Fitted)

GCR 9J (J11) 64305 BR Black (Early Emblem) (Sound Fitted) The Great Central Railway was a big mover of goods and amongst the locomotives it built for this purpose were the 9J 0-6-0s. Upon becoming part of the LNER in 1924 the 9Js were reclassified as J11s and this designation stayed remained into British Railways life and until withdrawal. Nicknamed ‘Pom Poms’ because their exhaust noise sounded very similar to the guns of the same name, these freight workhorses are replicated in OO scale by Bachmann Branchline. The J11s carried all the hallmarks of a locomotive designed by the GCR’s Chief Mechanical Engineer John G. Robinson and these features are replicated on the Branchline model using a precision moulded boiler, smokebox and firebox mounted on a diecast metal running plate. The distinctive Robinson cab is another high-fidelity moulding, within which boiler backhead is replicated using an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. The GCR tender has a distinctive look too with its high capacity and flared top edges, and again these trademark features are captured in miniature using high-fidelity mouldings. Coupling to the locomotive via a drawbar that is adjustable to suit individual layout conditions, electrical connections are integrated into it and a hinged fallplate is also fitted to the tender. Across the model separate components are added, from the metal handrails and sprung metal buffers, to the lamp irons at the front and rear, to complete the look of this freight machine. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. The black colour scheme is replicated with the usual care and attention that you expect from Bachmann Branchline, resulting in a paint finish that is rich and consistent throughout. Details like the running number, plates and plaques are then added using precision printing techniques for full authenticity. The Branchline J11 runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine BR Black Early Emblem livery Running No. 64305 Riveted Smokebox Door with Twin Handwheels, Numberplate and Lamp Iron mounted on the Smokebox Door LNER ‘Plantpot’ Chimney Snifter Valve LNER lowered Dome Ross Pop Safety Valves Parallel Buffer Shanks with End Collars Wakefield Lubricator (fitted to the left hand side) Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 220mm (over couplings) - OO Scale

Bachmann GCR 9J 295 GCR Lined Black (Sound Fitted)

GCR 9J 295 GCR Lined Black (Sound Fitted) The Great Central Railway was a big mover of goods and amongst the locomotives it built for this purpose were the 9J 0-6-0s. Nicknamed ‘Pom Poms’ because their exhaust noise sounded very similar to the guns of the same name, these freight workhorses are replicated in OO scale by Bachmann Branchline. The 9Js carried all the hallmarks of a locomotive designed by the GCR’s Chief Mechanical Engineer John G. Robinson and these features are replicated on the Branchline model using a precision moulded boiler, smokebox and firebox mounted on a diecast metal running plate. The distinctive Robinson cab is another high-fidelity moulding, within which boiler backhead is replicated using an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. The GCR tender has a distinctive look too with its high capacity and flared top edges, and again these trademark features are captured in miniature using high-fidelity mouldings. Coupling to the locomotive via a drawbar that is adjustable to suit individual layout conditions, electrical connections are integrated into it and a hinged fallplate is also fitted to the tender. Across the model separate components are added, from the metal handrails and sprung metal buffers, to the lamp irons at the front and rear, to complete the look of this freight machine. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. The black colour scheme with its ornate three-colour lining is reproduced to exquisite effect, with a rich and consistent finish throughout. The Great Central lettering and company crest on the tender is the icing on the cake, comprising no fewer than six separate colours and replicated using precision printing techniques for full authenticity. The Branchline 9J runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine Great Central Railway Lined Black livery Running No. 295 Smooth Smokebox Door with original Handwheel Top Front Lamp Iron mounted above the Smokebox Door Robinson Tapered Chimney Draught Retarder Original Tall Dome Ramsbottom Safety Valves Parallel Buffer Shanks with End Collars Central Rib on Cab Roof Tender fitted with Water Pick-Up Gear Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 220mm (over couplings) - OO Scale

Graham Farish Class 101 2-Car 'Power Twin' DMU BR Green (Sound Fitted) (N)

Class 101 2-Car 'Power Twin' DMU BR Green (Speed Whiskers) (Sound Fitted) The Class 101 Diesel Multiple Units were the most numerous of all the first generation DMUs and had a long service life, remaining in use for almost half a century, and we’re delighted to present N Scale models of this iconic unit as part of the Graham Farish range. This two-car unit depicts a ‘Power Twin’ comprising two vehicles equipped with an engine and the associated transmission and whilst all of these details are replicated faithfully on the Graham Farish model, just one of the vehicles is motorised. Each of the two cars is constructed from precision moulded bodyshells with flush glazing and a high level of raised and engraved detailing, from the ventilators and rivets found on the roof to the door furniture and window frames along each bodyside. Each chassis is adorned with all the underframe components you’d see on the prototype, including the engine, transmission, battery boxes and auxiliary gear. Both vehicles are brought to life with an exquisite livery application, using accurate colours, fonts and logos, and the detail and decoration extends to the interior too, where seating is fitted and painted accordingly, and the cab provides crew seats along with a representation of the control desk. The bogies are moulded with a high level of relief detail and separate footsteps are added where appropriate, meanwhile metal wheelsets are employed and electrical pickups from every wheel provide power for the directional lights at each cab end. The motorised vehicle is fitted with a powerful three pole motor with flywheel and both cars have a 6 pin DCC decoder socket; in the trailer a function decoder can be used to work the directional lights whereas the powered vehicle has a pre-fitted speaker so a sound decoder could be fitted to add sound to the model Details: Pristine BR Green livery with Speed Whiskers 2-Car Unit comprising DMBS No. E51427 and DMCL No. E51497 Destination Blinds for Bradford and Doncaster Headcode B6 displayed at both ends Features: Accessory Pack NEM Coupling Pockets Powerful 3 Pole Motor with Flywheel Interior Detailing Directional Lighting Speaker Fitted Equipped with two 6 Pin DCC Decoder Sockets – recommended Decoder 2 x item No. 36-568A Length 262mm (over couplings) - N Scale

Graham Farish Class 101 2-Car DMU BR Regional Railways (Sound Fitted) (N)

Class 101 2-Car DMU BR Regional Railways (Sound Fitted) The Class 101 Diesel Multiple Units were the most numerous of all the first generation DMUs and had a long service life, remaining in use for almost half a century, and we’re delighted to present N Scale models of this iconic unit as part of the Graham Farish range. This two-car unit depicts a Class 101 in later life and having received a few modifications from its original condition, like the fitting of high intensity headlights and the addition of bodyside heater louvres. Each of the two cars is constructed from precision moulded bodyshells with flush glazing and a high level of raised and engraved detailing, from the ventilators and rivets found on the roof to the door furniture and window frames along each bodyside. Each chassis is adorned with all the underframe components you’d see on the prototype, including the engine, transmission, battery boxes and auxiliary gear. Both vehicles are brought to life with an exquisite livery application, using accurate colours, fonts and logos, and the detail and decoration extends to the interior too, where seating is fitted and painted accordingly, and the cab provides crew seats along with a representation of the control desk. The bogies are moulded with a high level of relief detail and separate footsteps are added where appropriate, meanwhile metal wheelsets are employed and electrical pickups from every wheel provide power for the directional lights at each cab end. The motorised vehicle is fitted with a powerful three pole motor with flywheel and both cars have a 6 pin DCC decoder socket; in the trailer a function decoder can be used to work the directional lights whereas the powered vehicle has a pre-fitted speaker so a sound decoder could be fitted to add sound to the model Details: Pristine BR Regional Railways livery Set No. 101660 2-Car Unit comprising DMBS No. 51189 and DTSL No. 54343 Destination Blinds for Sheffield and Manchester Piccadilly Features: Accessory Pack NEM Coupling Pockets Powerful 3 Pole Motor with Flywheel Interior Detailing Directional Lighting Speaker Fitted Equipped with two 6 Pin DCC Decoder Sockets – recommended Decoder 2 x item No. 36-568A Length 262mm (over couplings) - N Scale

Bachmann Class 150/1 2-Car DMU 150101 Northern (Sound Fitted)

Class 150/1 2-Car DMU 150101 Northern (Sound Fitted) The Class 150 Diesel Multiple Unit (DMU) is an enduring design, first introduced in 1984 much of the fleet remains in service today with operators including Northern Trains. The distinctive blue and white livery of Northern makes a return to the Branchline Class 150 DMU, this time on a Class 150/1 as classmate 150101. Constructed from a highly detailed bodyshell which is adorned with separate components like the cab front handrails, roof ariels and exhaust, the Branchline model replicates the Class 150/1 faithfully. This announcement is also the first time we have produced Class 150/1’s with an accessible toilet in the DMSL, as signified by the blanked off toilet window on one side. The underframe boasts a suite of parts to depict the engine, drive train, electrical gear and auxiliary equipment, while inside the model, passenger seating is included along with cab detail. The livery application, using authentic colours and accurate typefaces and logos just enhances the model’s good looks, while the powerful and smooth drive mechanism and plug and play DCC compatibility makes the Class 150 DMU the perfect addition to any modern OO scale collection. This model is a sales area exclusive and is only available from stockists in Scotland and Northern England. Details: Pristine Northern livery Running No. 150101 Comprises Car Nos. 52101 and 57101 Destination Blinds for Buxton Features: Accessory Pack NEM Coupling Pockets Powerful 5 Pole Motor with Flywheel Interior Detailing and Lighting Directional Lighting Equipped with one 21 Pin DCC Decoder Socket – recommended Decoder 36-557A  Length 540mm - OO Scale

Graham Farish GWR 4073 'Castle' 5015 'Kingswear Castle' BR Green Early (SF)(N)

GWR 4073 'Castle' 5015 'Kingswear Castle' BR Lined Green Early Emblem (Sound Fitted) The model that started a revolution as the first British N Scale steam locomotive to be made with SOUND FITTED, the Graham Farish ‘Castle’ has a technical specification as impressive as its good looks, with a powerful coreless motor driving the wheels through a diecast metal gearbox, all wheel pickup from the driving and tender wheels and separate metal bearings fitted to the driving wheel axles, smooth and reliable running is guaranteed. The tender houses a speaker and Next18 DCC decoder socket, making it easy to add sound, or opt for a SOUND FITTED version and the work is done for you, so you can enjoy realistic sound effects straight from the box on both Analogue and DCC. Details on this model: Pristine BR Lined Green (Early Emblem) Livery Running No. 5015 Named ‘Kingswear Castle’ Collett 4,000-gallon Tender Single Chimney Inside Cylinder Chest: Box Pattern with Straight Front Curved Cylinder Steam Pipes Tapered Buffers Horizontal Cab Side Handrail Rear Sandboxes Behind Cab Steps Short Nameplates Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 145mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater High-precision, injection-moulded bodyshell, running plate and tender with separately fitted details parts including smokebox door, lower front lamp irons, steam pipes, whistle and reverser Separately applied metal components including handrails, buffers and sand pipes Dome, filler cap, water scoop and vacuum pipe added to the tender as separate parts Tender fitted with metal coal-effect load Detailed cab interior including boiler backhead controls and gauges, brake standard and water scoop standard Hinged and posable metal fall plate between the locomotive and tender Each model supplied with a full set of accessory parts including dummy screwlink couplings and front vacuum pipe Speaker installed in the tender of all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions - N Scale

Graham Farish GWR 4073 'Castle' 5055 'Earl of Eldon' GWR Lined Green (SF) (N)

GWR 4073 'Castle' 5055 'Earl of Eldon' GWR Lined Green (GW Crest) (Sound Fitted) The model that started a revolution as the first British N Scale steam locomotive to be made with SOUND FITTED, the Graham Farish ‘Castle’ has a technical specification as impressive as its good looks, with a powerful coreless motor driving the wheels through a diecast metal gearbox, all wheel pickup from the driving and tender wheels and separate metal bearings fitted to the driving wheel axles, smooth and reliable running is guaranteed. The tender houses a speaker and Next18 DCC decoder socket, making it easy to add sound, or opt for a SOUND FITTED version and the work is done for you, so you can enjoy realistic sound effects straight from the box on both Analogue and DCC. Details on this model: Pristine GWR Lined Green (GW Crest) Livery Running No. 5055 Named ‘Earl of Eldon’ Collett 4,000-gallon Tender Single Chimney Inside Cylinder Chest: Box Pattern with Curved Front Straight Cylinder Steam Pipes Tapered Buffers Horizontal Cab Side Handrail Rear Sandboxes Behind Cab Steps Short Nameplates Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 145mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater High-precision, injection-moulded bodyshell, running plate and tender with separately fitted details parts including smokebox door, lower front lamp irons, steam pipes, whistle and reverser Separately applied metal components including handrails, buffers and sand pipes Dome, filler cap, water scoop and vacuum pipe added to the tender as separate parts Tender fitted with metal coal-effect load Detailed cab interior including boiler backhead controls and gauges, brake standard and water scoop standard Hinged and posable metal fall plate between the locomotive and tender Each model supplied with a full set of accessory parts including dummy screwlink couplings and front vacuum pipe Speaker installed in the tender of all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions - N Scale

Graham Farish Class 150/2 150232 GWR Green (FirstGroup) (Sound Fitted) (N)

Class 150/2 150232 GWR Green (FirstGroup) (Sound Fitted) The Class 150 Diesel Multiple Unit (DMU) is an enduring design, first introduced in 1984 much of the fleet remains in service today with operators including GWR FirstGroup. The striking green livery of GWR adorns the Graham Farish Class 150 DMU for the first time and we’ve selected 150/2 No. 150232 as the subject for this sublime N Scale model which comes complete with SOUND FITTED. The 150/2 sub-class is characterised by the gangway doors fitted to the cab ends, allowing two or more units to work in multiple whilst allowing access from one unit to another. Constructed from a highly detailed bodyshell which is adorned with separate components like the cab front handrails, gangway connectors and exhaust, the Graham Farish model replicates the Class 150/2 faithfully. The chassis boasts a suite of parts to depict the engine, drive train, electrical gear and auxiliary equipment, while inside the model, passenger seating is included along with cab detail. The livery application, using authentic colours and accurate typefaces and logos just enhances the model’s good looks, while the powerful and smooth drive mechanism and pre-fitted DCC decoders in this SOUND FITTED model makes the Class 150 DMU the perfect addition to any modern N scale collection. Features: Pristine GWR Green (FirstGroup) livery Running No. 150232 Comprises Car Nos. 52232 and 57232 Destination Blinds for Penzance Accessory Pack NEM Coupling Pockets Powerful 3 Pole Motor with Flywheel Interior Detailing Directional Lighting SOUND FITTED – Fitted with a Zimo MX649N DCC Sound Decoder (and a Zimo MX671N DCC Decoder in the trailer vehicle) Length 290mm - Era 9 - N Scale

Graham Farish Class 150/2 150213 Transport for Wales (Sound Fitted) (N)

Class 150/2 150213 Transport for Wales (Sound Fitted) The Class 150 Diesel Multiple Unit (DMU) is an enduring design, first introduced in 1984 much of the fleet remains in service today with operators including Transport for Wales (TfW). The striking white, red and grey livery of TfW adorns the Graham Farish Class 150 DMU for the first time and we’ve selected 150/2 No. 150213 as the subject for this sublime N Scale model which comes complete with SOUND FITTED. The 150/2 sub-class is characterised by the gangway doors fitted to the cab ends, allowing two or more units to work in multiple whilst allowing access from one unit to another. Constructed from a highly detailed bodyshell which is adorned with separate components like the cab front handrails, gangway connectors and exhaust, the Graham Farish model replicates the Class 150/2 faithfully. The chassis boasts a suite of parts to depict the engine, drive train, electrical gear and auxiliary equipment, while inside the model, passenger seating is included along with cab detail. The livery application, using authentic colours and accurate typefaces and logos just enhances the model’s good looks, while the powerful and smooth drive mechanism and pre-fitted DCC decoders in this SOUND FITTED model makes the Class 150 DMU the perfect addition to any modern N scale collection. Features: Pristine Transport for Wales livery Running No. 150213 Comprises Car Nos. 52213 and 57213 Destination Blinds for Cardiff Central Accessory Pack NEM Coupling Pockets Powerful 3 Pole Motor with Flywheel Interior Detailing Directional Lighting Speaker Fitted SOUND FITTED – Fitted with a Zimo MX649N DCC Sound Decoder (and a Zimo MX671N DCC Decoder in the trailer vehicle) Length 290mm - Era 9 - N Scale

Bachmann Class 69 69013 Andy's Man Club GBRf Black (Sound Fitted Deluxe)

Class 69 69013 Andy's Man Club GBRf Black (Sound Fitted Deluxe) Bachmann Europe Plc has teamed up with GB Railfreight (GBRf) to produce a OO Scale model of Class 69 Diesel Locomotive No. 69013, which will be sold to help raise funds for Andy’s Man Club, the mental health charity that encourages men to talk and aims to prevent male suicide. The real loco debuted in its striking black livery at the end of April 2025, complete with Andy’s Man Club branding and contact details along with the hashtag #itsoktotalk. Bachmann will be donating proceeds from every sale of this model and with it being the 13th member of the Class 69 fleet, we aim to raise £13,000 to help Andy’s Man Club get men talking all over the UK. No. 69013 is the first model to be unveiled for the second batch of Branchline Class 69s which will be released in 2026. The real locomotive is unique amongst the 16-strong fleet of converted Class 56s in having the lower portions of its cab sheeting removed. This modification was made to the donor locomotive No. 56312 and has been carried over to No. 69013 but is not present on the other 15 locomotives. Every Branchline model is manufactured using complex and expensive tooling suites and producing a model with this unique feature is not possible using the current tooling that Bachmann has developed. Therefore, to model this variant would require new tooling, including a new bodyshell, underframe and chassis block. The cost of such additional tooling would be prohibitive for a single locomotive, preventing any meaningful donation to Andy’s Man Club. Features: Pristine Andy’s Man Club GBRf Black livery Running No. 69013 Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 254mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fans, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Separately applied metal detail parts, including lifting eyes, windscreen wipers and etched bodyside and fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Sound files produced specifically for the Bachmann Branchline Class 69 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied - Era 10 - OO Scale

Bachmann Class 69 69013 Andy's Man Club GBRf Black (Sound Fitted)

Class 69 69013 Andy's Man Club GBRf Black (Sound Fitted) Bachmann Europe Plc has teamed up with GB Railfreight (GBRf) to produce a OO Scale model of Class 69 Diesel Locomotive No. 69013, which will be sold to help raise funds for Andy’s Man Club, the mental health charity that encourages men to talk and aims to prevent male suicide. The real loco debuted in its striking black livery at the end of April 2025, complete with Andy’s Man Club branding and contact details along with the hashtag #itsoktotalk. Bachmann will be donating proceeds from every sale of this model and with it being the 13th member of the Class 69 fleet, we aim to raise £13,000 to help Andy’s Man Club get men talking all over the UK. No. 69013 is the first model to be unveiled for the second batch of Branchline Class 69s which will be released in 2026. The real locomotive is unique amongst the 16-strong fleet of converted Class 56s in having the lower portions of its cab sheeting removed. This modification was made to the donor locomotive No. 56312 and has been carried over to No. 69013 but is not present on the other 15 locomotives. Every Branchline model is manufactured using complex and expensive tooling suites and producing a model with this unique feature is not possible using the current tooling that Bachmann has developed. Therefore, to model this variant would require new tooling, including a new bodyshell, underframe and chassis block. The cost of such additional tooling would be prohibitive for a single locomotive, preventing any meaningful donation to Andy’s Man Club. Features: Pristine Andy’s Man Club GBRf Black livery Running No. 69013 Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 254mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fans, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Separately applied metal detail parts, including lifting eyes, windscreen wipers and etched bodyside and fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Sound files produced specifically for the Bachmann Branchline Class 69 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied - Era 10 - OO Scale

Rapido UK Ivor the Engine Train Pack (Sound Fitted)

Ivor the Engine Train Pack (Sound Fitted) Features: Ivor the Engine, with working headlamps and glowing dragon egg in the firebox Two open/sheep wagons Full range of sounds and dialogue from the original colour animations on DCC SOUND versions 2D cardboard figures with bases for Jones the Steam, Dai Station, Idris the Dragon and three sheep, all produced from the original animation artwork Fold-up cardboard engine shed and water tower. A brand-new Ivor the Engine story written and illustrated by Daniel Postgate Special presentation box Compatible with other OO gauge products Die-cast metal and injection moulded plastic construction. High quality motor and mechanism. Next18 decoder socket Factory-fitted speaker in all locomotives - OO Scale

Graham Farish Class 47/0 D1565 BR Green (Small Yellow Panels) DCC Sound

Class 47/0 D1565 BR Green (Small Yellow Panels) DCC Sound The Class 47 was British Railways’ most prolific class of main-line diesel locomotive and so it’s no surprise that high fidelity models of these ever-popular machines are available in N Scale as part of the flagship Graham Farish range. This model tells the story of the Class’s early days of service, sporting original features and carrying the iconic two-tone green livery in which the majority of the fleet was outshopped, complete with small yellow warning panels at either end. Features: SOUND FITTED – Fitted with a ESU Loksound V5DCC Sound Decoder Length 139mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from eight wheels Diecast metal chassis block Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting, switchable on/off (when used on DCC only) Speaker installed in all models for optimum sound reproduction Detail Specific To This Model: Pristine BR Green (Small Yellow Panels) livery Running No. D1565 Glazed Headcode Panels Displaying Blinds 1E11 and 4N09 Twin Arm Windscreen Wipers High Intensity Headlight Round Buffers Bodyside Step below Cab Door Full Cab Roof Vents Original Three-Piece Radiator Grilles Ribbed Exhaust Panels Spanner Mk3 Roof Boiler Port 1,250 Gallon Water Tanks with Water Chutes Open Bogie-mounted Cab Steps - Era 5 - N Scale

Rapido UK 16" Hunslet - "Primrose No.2" (1970s/preserved) - (Sound Fitted)

16" Hunslet - "Primrose No.2" (1970s / preserved) - DCC SOUND Features: NCB red livery as seen during the 1970’s and preservation career with stovepipe chimney. Die-cast metal construction. High quality motor and mechanism. DCC Sound Fitted. High level of detail with plenty of separately fitted parts. NEM coupler pockets. Sprung buffers. - OO Scale

Hornby SR, Merchant Navy 21C1 'Channel Packet' (TXS Steam Generator)

SR, Merchant Navy 21C1 'Channel Packet' (TXS Steam Generator) Locomotive 21C1 'Channel Packet' was the first of the Merchant Navy class, entering service in 1941 at Salisbury and then Exmouth Junction from 1942. Renumbered '35001' under British Railways in 1948, 'Channel Packet' was allocated to Stewarts Lane from 1957 until rebuilding in 1959. This model features DCC sound and steam functionality to recreate the first of Bulleid’s powerful and iconic Merchant Navy locomotives.  Detail features:  High detail OO gauge model based on extensive research and original works drawings  High detail cab with fully decorated backhead and decorated instrument dials  Opening cab roof vent  Removable simulated coal load with fully detailed tender bunker Accurately modelled Merchant Navy Bullied-Firth-Brown wheels Early 21C1 'widows peak' front end streamlining and chimney arrangement 5000 gallon tender in its original condition with raves yet to be cut back Cast trailing truck Separately fitted nameplate, number plate and company ownership plate Horseshoe smokebox door company plate  Sprung metal buffers Heavy die-cast chassis, pony truck and trailing truck  Electronics & traction features:  Pre-fitted steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element)  Pre-fitted 21-pin HM7000 decoder and speaker. The decoder is compatible with NMRA DCC controllers and HM7000 app control  Pre-installed Merchant Navy sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect Adjustable steam output settings via the decoder  Water reservoir for up to 20 minutes of continuous steam running Die-cast connecting rods and valve gear  Powerful 5-pole skew-wound motor  Flywheel with cardan shaft arrangement for smooth running  Oilite main drive bearings  Wheel pickups on tender & driven locomotive wheelsets  Pogo pin wheel pickup arrangement for easy pickup servicing  8-way locomotive to tender drawbar, with integrated electrical connection for easy coupling and decoupling Front and rear NEM coupling pockets, with narrow tension lock couplings  Optional fit rear flanged wheelset (only recommended for larger layouts with sweeping curves or display purposes)  Please note: This model requires a DCC controller or the HM7000 app to control.  - OO Scale

Graham Farish Class 47/7 47712 'Lady Diana Spencer' BR ScotRail (SF) (N)

Class 47/7 47712 'Lady Diana Spencer' BR ScotRail The Class 47 was British Railways’ most prolific class of main-line diesel locomotive and so it’s no surprise that high fidelity models of these ever-popular machines are available in N Scale as part of the flagship Graham Farish range. Such was their success that Class 47s went through various upgrade and refurbishment programmes during their careers, to extend their lives or ready them for new services, and the Class 47/7 sub-class is just one example – these locomotives being fitted with extended range fuel tanks and cab-front jumper cables to work push-pull trains in Scotland. No. 47712 ‘Lady Diana Spencer’ was one of the first twelve locomotives converted to a 47/7, having entered works as Class 47/4 No. 47505, and is modelled in the striking BR ScotRail livery with bold grey, white and blue bodyside bands and large yellow ends and cab rooves. The real locomotive survives in preservation today, and has recently been returned to service on the main line, in much the same 1980s condition as depicted by our model. ‘Lady Diana Spencer’ takes full advantage to the recent upgrades that have benefited the Graham Farish Class 47, namely the technical advancements which see the model boasting a Next18 DCC decoder interface, pre-fitted speaker, cab lighting (when used on DCC) and independent control of the directional lights at each end. Features: Pristine BR ScotRail livery Running No. 47712 Named ‘Lady Diana Spencer’ SOUND FITTED – Fitted with a ESU Loksound V5DCC Sound Decoder Length 139mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from eight wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities Bogie-mounted coupling pockets to NEM355 standards at each end Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail Separately applied detail parts, including lamp irons, cab handrails and roof aerial (where applicable) Separately fitted battery box/water/fuel tank assembly Cab Interior Detailing Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting, switchable on/off (when used on DCC only) Speaker installed in all models for optimum sound reproduction Details Specific to this Model: Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Cab-Front-mounted ETH Equipment Scottish Jumper Cables Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Smooth Exhaust Panels Plated Clayton Roof Boiler Port Water Tanks Removed Later Extended Range Fuel Tanks NRN Aerials Plated Bogie-mounted Cab Steps - Era 8 - N Scale

Accurascale Class 37 37903 BR Railfreight Grey Large Logo - DCC Sound

Class 37 37903 BR Railfreight Grey Large Logo - DCC Sound Features: Provided Factory DCC Sound Fitted [ESU LokSound 5] ESU LokSound V5 DCC Chip Customised Dual-Speaker Technology with; Large Accurathrash Bass Speaker Smaller 'iphone' style cube for higher frequencies Every model includes PowerPack / Backup Power Capacitor Bank for up to ten seconds of power free running, flicker free lighting and continuous sound as well as independently controlled, smooth coreless motorised fan. Directional lighting on DC and DCC Fully functional Headlights per prototype Engine Bay Lighting (with visible Prime Mover) Separately switched cab lighting and illuminated, details driver’s console, auto off on movement Switchable red tail lights Heavy die-cast metal chassis High-quality five-pole motor with two flywheels Metal Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a scale top speed of 100 mph (160 km/h) DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running All wheel drive and all wheel pickup Fully sprung metal buffers, extra-fine factory-installed pipework and screw couplings Correct height mini-tension-lock couplers with NEM socket as well as a fully detailed bufferbeam - OO Scale

Bachmann MR 1532 (1P) Tank 58040 BR Lined Black (BR) - DCC Sound Fitted

MR 1532 (1P) Tank 58040 BR Lined Black (British Railways) - DCC Sound Fitted Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 142mm (over couplings) Coreless motor Electrical pickup from all wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities Pivoting and sprung rear pony truck Optional wheelset supplied in the accessory pack with traction tyres fitted, to provide increased haulage capacity where required 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate with integral side tank weights Precision moulded plastic boiler, side tanks and cab Separately applied details including lamp irons, push-pull gear*, condensing apparatus*, handrails, whistle, vacuum pipes and turned brass safety valves* (*where applicable) Highly detailed and decorated cab interior including separately fitted regulator, reverser, handbrake and valve wheels Running gear detailing includes springs, brakes and separately fitted brake gear, sandboxes and sandpipes Glazed cab spectacles Sprung metal buffers Each model supplied with an accessory pack including cab doors, additional bufferbeam pipework, cab steps and screwlink couplings Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in all models for optimum sound reproduction ESU Loksound Micro V5DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Midland Class 1532 (1P) using recordings from real locomotives Details Specific To This Model: Pristine BR Lined Black ‘British Railways’ Livery Running No. 58040 Belpaire Boiler Standard Side Tanks Welded Side Tanks and Bunker High Cab Front Windows Straight-Sided Bunker with 3-Bar Coal Rails Standard Lamp Irons Deeley 3’ Chimney Rivetted Smokebox Smokebox Door with BR Style Numberplate Low Smokebox Door Handrail Push-Pull Fitted Large Vacuum Exhauster Sandboxes Fitted Between Driving Wheels Running Plate Steps   The Midland Railway Class 1532, alongside a number of similar 0-4-4T designs, formed the backbone of Midland Railway local and light passenger duties for decades, and now the OO scale model of this ornate prototype returns to the Bachmann Branchline range. Although the first examples were built in 1881, almost seventy years later British Railways inherited many of these Victorian machines following Nationalisation and set them to work on the branch lines and local services with which they were already very familiar. Reproduced as this marvel in miniature, the Branchline model comes packed with an impressive level of detail wherever you look. A significant proportion of the 1P is made from diecast metal, with fine engraving and detailing, which is complemented by precision moulded components capturing every aspect of the prototype in high fidelity. Sprung buffers are fitted to each bufferbeam, whilst in the cab, the locomotive controls are faithfully captured and decorated authentically. - Era 4 - OO Scale

Bachmann MR 1532 (1P) Tank 58051 BR Lined Black (E/E) - DCC Sound Fitted

MR 1532 (1P) Tank 58051 BR Lined Black (Early Emblem) - DCC Sound Fitted Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 142mm (over couplings) Coreless motor Electrical pickup from all wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities Pivoting and sprung rear pony truck Optional wheelset supplied in the accessory pack with traction tyres fitted, to provide increased haulage capacity where required 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate with integral side tank weights Precision moulded plastic boiler, side tanks and cab Separately applied details including lamp irons, push-pull gear*, condensing apparatus*, handrails, whistle, vacuum pipes and turned brass safety valves* (*where applicable) Highly detailed and decorated cab interior including separately fitted regulator, reverser, handbrake and valve wheels Running gear detailing includes springs, brakes and separately fitted brake gear, sandboxes and sandpipes Glazed cab spectacles Sprung metal buffers Each model supplied with an accessory pack including cab doors, additional bufferbeam pipework, cab steps and screwlink couplings Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in all models for optimum sound reproduction ESU Loksound Micro V5DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Midland Class 1532 (1P) using recordings from real locomotives Details Specific To This Model: Pristine BR Lined Black Early Emblem Livery Running No. 58051 Belpaire Boiler Standard Side Tanks Welded Side Tanks and Bunker High Cab Front Windows Straight-Sided Bunker with 3-Bar Coal Rails Standard Lamp Irons Deeley 3’ Chimney Rivetted Smokebox Smokebox Door with BR Style Numberplate Low Smokebox Door Handrail Push-Pull Fitted Large Vacuum Exhauster Sandboxes Fitted Between Driving Wheels Running Plate Steps   The Midland Railway Class 1532, alongside a number of similar 0-4-4T designs, formed the backbone of Midland Railway local and light passenger duties for decades, and now the OO scale model of this ornate prototype returns to the Bachmann Branchline range. Although the first examples were built in 1881, almost seventy years later British Railways inherited many of these Victorian machines following Nationalisation and set them to work on the branch lines and local services with which they were already very familiar. Reproduced as this marvel in miniature, the Branchline model comes packed with an impressive level of detail wherever you look. A significant proportion of the 1P is made from diecast metal, with fine engraving and detailing, which is complemented by precision moulded components capturing every aspect of the prototype in high fidelity. Sprung buffers are fitted to each bufferbeam, whilst in the cab, the locomotive controls are faithfully captured and decorated authentically. - Era 4 - OO Scale

Bachmann MR 1532 (1P) Tank 58056 BR Lined Black (E/E) - DCC Sound Fitted

MR 1532 (1P) Tank 58056 BR Lined Black (Early Emblem) - DCC Sound Fitted Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 142mm (over couplings) Coreless motor Electrical pickup from all wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities Pivoting and sprung rear pony truck Optional wheelset supplied in the accessory pack with traction tyres fitted, to provide increased haulage capacity where required 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate with integral side tank weights Precision moulded plastic boiler, side tanks and cab Separately applied details including lamp irons, push-pull gear*, condensing apparatus*, handrails, whistle, vacuum pipes and turned brass safety valves* (*where applicable) Highly detailed and decorated cab interior including separately fitted regulator, reverser, handbrake and valve wheels Running gear detailing includes springs, brakes and separately fitted brake gear, sandboxes and sandpipes Glazed cab spectacles Sprung metal buffers Each model supplied with an accessory pack including cab doors, additional bufferbeam pipework, cab steps and screwlink couplings Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in all models for optimum sound reproduction ESU Loksound Micro V5DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Midland Class 1532 (1P) using recordings from real locomotives Details Specific To This Model: Pristine BR Lined Black Early Emblem Livery Running No. 58056 Belpaire Boiler Standard Side Tanks Welded Side Tanks and Bunker High Cab Front Windows Straight-Sided Bunker with 3-Bar Coal Rails Standard Lamp Irons Deeley 3’ Chimney Rivetted Smokebox Smokebox Door with BR Style Numberplate Low Smokebox Door Handrail Push-Pull Fitted Large Vacuum Exhauster Sandboxes Fitted Between Driving Wheels Running Plate Steps   The Midland Railway Class 1532, alongside a number of similar 0-4-4T designs, formed the backbone of Midland Railway local and light passenger duties for decades, and now the OO scale model of this ornate prototype returns to the Bachmann Branchline range. Although the first examples were built in 1881, almost seventy years later British Railways inherited many of these Victorian machines following Nationalisation and set them to work on the branch lines and local services with which they were already very familiar. Reproduced as this marvel in miniature, the Branchline model comes packed with an impressive level of detail wherever you look. A significant proportion of the 1P is made from diecast metal, with fine engraving and detailing, which is complemented by precision moulded components capturing every aspect of the prototype in high fidelity. Sprung buffers are fitted to each bufferbeam, whilst in the cab, the locomotive controls are faithfully captured and decorated authentically. - Era 4 - OO Scale

Bachmann MR 1532 (1P) Tank 1295 LMS Black - DCC Sound Fitted

MR 1532 (1P) Tank 1295 LMS Black - DCC Sound Fitted Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 142mm (over couplings) Coreless motor Electrical pickup from all wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities Pivoting and sprung rear pony truck Optional wheelset supplied in the accessory pack with traction tyres fitted, to provide increased haulage capacity where required 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate with integral side tank weights Precision moulded plastic boiler, side tanks and cab Separately applied details including lamp irons, push-pull gear*, condensing apparatus*, handrails, whistle, vacuum pipes and turned brass safety valves* (*where applicable) Highly detailed and decorated cab interior including separately fitted regulator, reverser, handbrake and valve wheels Running gear detailing includes springs, brakes and separately fitted brake gear, sandboxes and sandpipes Glazed cab spectacles Sprung metal buffers Each model supplied with an accessory pack including cab doors, additional bufferbeam pipework, cab steps and screwlink couplings Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in all models for optimum sound reproduction ESU Loksound Micro V5DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Midland Class 1532 (1P) using recordings from real locomotives Details Specific To This Model: Pristine LMS Black Livery Running No. 1295 Belpaire Boiler Standard Side Tanks Welded Side Tanks and Bunker High Cab Front Windows Straight-Sided Bunker with 4-Bar Coal Rails Standard Lamp Irons Deeley 3’ Chimney Rivetted Smokebox Smokebox Door with MR/LMS Style Numberplate Low Smokebox Door Handrail Large Vacuum Exhauster Sandboxes Fitted Between Driving Wheels Running Plate Steps   The Midland Railway Class 1532, alongside a number of similar 0-4-4T designs, formed the backbone of Midland Railway local and light passenger duties for decades, and now the OO scale model of this ornate prototype returns to the Bachmann Branchline range. The LMS embarked on a programme to replace the 1P’s original round-top boilers with Belpaire boilers and No. 1370 is one such locomotive to have undergone this treatment. A miniature marvel, the Branchline model is packed with an impressive level of detail wherever you look. A significant proportion of the 1P is made from diecast metal, with fine engraving and detailing, which is complemented by precision moulded components capturing every aspect of the prototype in high fidelity. Sprung buffers are fitted to each bufferbeam, whilst in the cab, the locomotive controls are faithfully captured and decorated authentically. - Era 3 - OO Scale

Bachmann MR 1532 (1P) Tank 1370 LMS Black - DCC Sound Fitted

MR 1532 (1P) Tank 1370 LMS Black - DCC Sound Fitted Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 142mm (over couplings) Coreless motor Electrical pickup from all wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities Pivoting and sprung rear pony truck Optional wheelset supplied in the accessory pack with traction tyres fitted, to provide increased haulage capacity where required 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate with integral side tank weights Precision moulded plastic boiler, side tanks and cab Separately applied details including lamp irons, push-pull gear*, condensing apparatus*, handrails, whistle, vacuum pipes and turned brass safety valves* (*where applicable) Highly detailed and decorated cab interior including separately fitted regulator, reverser, handbrake and valve wheels Running gear detailing includes springs, brakes and separately fitted brake gear, sandboxes and sandpipes Glazed cab spectacles Sprung metal buffers Each model supplied with an accessory pack including cab doors, additional bufferbeam pipework, cab steps and screwlink couplings Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in all models for optimum sound reproduction ESU Loksound Micro V5DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Midland Class 1532 (1P) using recordings from real locomotives Details Specific To This Model: Pristine LMS Black Livery Running No. 1370 Belpaire Boiler Standard Side Tanks Welded Side Tanks and Bunker High Cab Front Windows Straight-Sided Bunker with 4-Bar Coal Rails Standard Lamp Irons Deeley 3’ Chimney Rivetted Smokebox Smokebox Door with MR/LMS Style Numberplate Low Smokebox Door Handrail Large Vacuum Exhauster Sandboxes Fitted Between Driving Wheels Running Plate Steps   The Midland Railway Class 1532, alongside a number of similar 0-4-4T designs, formed the backbone of Midland Railway local and light passenger duties for decades, and now the OO scale model of this ornate prototype returns to the Bachmann Branchline range. The LMS embarked on a programme to replace the 1P’s original round-top boilers with Belpaire boilers and No. 1370 is one such locomotive to have undergone this treatment. A miniature marvel, the Branchline model is packed with an impressive level of detail wherever you look. A significant proportion of the 1P is made from diecast metal, with fine engraving and detailing, which is complemented by precision moulded components capturing every aspect of the prototype in high fidelity. Sprung buffers are fitted to each bufferbeam, whilst in the cab, the locomotive controls are faithfully captured and decorated authentically. - Era 3 - OO Scale

Accurascale Hunslet Austerity HC1775 BR Black Early Emblem 68025 - DCC Sound

Hunslet Austerity HC1775 BR Black Early Emblem 68025 - DCC Sound This locomotive was one of a batch of 36 Austerities by Hudswell Clarke of Leeds. This particular one was completed in November 1944 and carried the WD number 71498. Purchased by the LNER in June 1946 the locomotive was classified as a J94 and numbered 8025. The distinctive extended bunker was fitted in November 1949 when it was renumbered 68025 and gained the early BR emblem. The locomotive was based at Darlington 51A until withdrawal in 1963. The locomotive did not survive and was cut up shortly after. The model replicates the period after 1949 and carries the extended bunker, smokebox numberplate and additional steps and handrails on the tank Features: Highly detailed 0-6-0ST 00 gauge model, 1:76.2 scale on 16.5mm track Minimum Radius 438mm (2nd radius set track) RP25-110 profile 00 gauge wheels Coreless motor with flywheel geared for maximum performance and slow speed running Die-cast metal chassis and pickups to all wheels. Next18 DCC ready or ESU LokSound V5 sound fitted, slot mounted in smokebox PowerPack capacitor for uninterrupted power Two quality sugar cube speakers contained in sound capsule located for best possible sound. Small, flexible neck NEM coupler mounts set at correct height, with mini-tension-lock couplers. Brake rigging factory fitted Brake blocks aligned with wheels Scale width wire handrails and sand pipes Fully detailed cab interior with twin LED pulsing/steady Firebox glow Etched metal/plastic detail parts, including grab handles, steps, pipework, lamp irons etc. Sliding roof ventilator Etched metal pre-painted name plates and works plates. Fully sprung metal buffers, factory-installed pipework and screw/3 link couplings Magnetically removable smoke box door for DCC decoder access - OO Scale

Graham Farish LMS 10001 BR Green (Late Crest) - DCC Sound Fitted

LMS 10001 BR Green (Late Crest) - DCC Sound Fitted The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and now, this pioneering pair is available in N scale as part of the Graham Farish range. Features: Pristine BR Green (Late Crest) livery Running No. 10001 Six Headcode Lights & Brackets at each end Smooth Bodysides (No Steps) Water Scoops Fitted Modified Exhaust Panels (with vent grilles) Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 127mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail, including separately fitted metal sand pipes Separately applied underframe and roof detail components Separate lamp irons fitted to each nose Detailed cab interior Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Passenger/Freight mode, switchable on Analogue control and with additional configurations available when used on DCC Cab lighting, switchable on/off (leading end, when used on DCC only) Authentic light colours and temperatures selected for each model based on era and application Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LMS 10000/10001 using recordings from real locomotives - Era 5 - N Scale

Graham Farish LMS 10000 BR Black (Early Emblem) - DCC Sound Fitted

LMS 10000 BR Black (Early Emblem) - DCC Sound Fitted The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and now, this pioneering pair is available in N scale as part of the Graham Farish range. Features: Pristine BR Black & Silver Early Emblem livery Running No. 10000 Four Headcode Lights & Brackets at each end Bodyside Steps Original Exhaust Panels Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 127mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail, including separately fitted metal sand pipes Separately applied underframe and roof detail components Separate lamp irons fitted to each nose Detailed cab interior Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Passenger/Freight mode, switchable on Analogue control and with additional configurations available when used on DCC Cab lighting, switchable on/off (leading end, when used on DCC only) Authentic light colours and temperatures selected for each model based on era and application Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LMS 10000/10001 using recordings from real locomotives - Era 4 - N Scale

Accurascale Class 66 66421 'Gresty Bridge TMD' DRS - DCC Sound

Class 66 66421 'Gresty Bridge TMD' DRS - DCC Sound One engine that hasn’t changed operators was DRS owned 66421. This particular locomotive was delivered on the 9th September 2007. Originally carrying the DRS compass livery, the locomotive was soon put to work on a variety of the companies trains.66421 was refreshed with the new simplified DRS livery during 2015 and ran unnamed until 2018 when it featured at the DRS Crewe Gresty Bridge TMD open day where it was named after the depot. Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Hornby BR Class 56 56060 'The Cardiff Rod Mill' (Sound Fitted)

BR Railfreight, Class 56, Co-Co, 56060 'The Cardiff Rod Mill' - Era 8 (TXS DCC Sound Fitted)  Includes: - Highly detailed with fine grill parts - BR railfreight two tone grey livery - Metal Sector logo - TXS DCC Sound Fitted    (NOTE: This model and sound functions can ONLY be operated with the HM7000 App via bluetooth or a DCC digital controller) - Accessory bag - Sprung buffers - NEM couplings and pockets - 5 pole motor - Model will traverse 2nd radius curves minimum (R606/R607) - Era 8 - OO Scale

Graham Farish LNER V2 4791 LNER Lined Green (Original) DCC Sound Fitted

LNER V2 4791 LNER Lined Green (Original) 4791 DCC Sound Fitted Some twenty years since the V2 was first produced in N scale by Graham Farish, this all-new model of the LNER Mixed Traffic icon is made to standards not even dreamt of twenty years ago. Often described as ‘the engines that won the war’, these new Graham Farish models are sure to win the heart of any discerning N scale enthusiast. Depicting one of the LNER’s most successful steam locomotive designs, this masterpiece in miniature captures the look and the character of the prototype to a tee. With highly detailed mouldings and many separate parts used on both the locomotive and tender, including era- and prototype-specific detailing to allow accurate models of any given class member throughout their working lives, the performance of these new V2s is just as impressive as their appearance. A powerful coreless motor and flywheel is incorporated into the diecast locomotive chassis, powering the driving wheels which run in separate metal bearings. With electrical pickup from the driving wheels and tender wheels and the option to have traction tyres fitted to one driving wheelset, this new V2 is on a steady footing as soon as it hits the rails. With a Next18 DCC decoder socket and pre-fitted speaker located in the tender, this model is future proofed for those wishing to operate on DCC, with or without sound. What’s more, a SOUND FITTED version is also available providing realistic sound effects on both analogue and DCC straight out of the box! Detail Variations Specific To This Model: Pristine LNER Lined Green (Original) livery Running No. 4791 Original ‘Monobloc’ Cylinder Casting with Inside Steam Pipes LNER Smokebox Door without Numberplate and with Lower Top Lamp Bracket Later Style Rocker Arm Guides Group Standard Tender with High-Front/Low-Rear Coal Space Dividers Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 141mm Coreless motor with flywheel Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Sprung front pony truck Cartazzi truck with flanged wheelset (with side swing for operational necessity) Optional traction tyres fitted to the rear driving wheels (replacement wheelset without traction tyres supplied in the accessory pack) Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front pony truck Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater Speaker installed in the tender of all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LNER V2 Class using recordings from real locomotives - N Scale

Graham Farish LNER V2 60845 BR Lined Black (Early Emblem) DCC S/F

LNER V2 60845 BR Lined Black (Early Emblem) 60845 DCC Sound Fitted Some twenty years since the V2 was first produced in N scale by Graham Farish, this all-new model of the LNER Mixed Traffic icon is made to standards not even dreamt of twenty years ago. Often described as ‘the engines that won the war’, these new Graham Farish models are sure to win the heart of any discerning N scale enthusiast. Depicting one of the LNER’s most successful steam locomotive designs, this masterpiece in miniature captures the look and the character of the prototype to a tee. With highly detailed mouldings and many separate parts used on both the locomotive and tender, including era- and prototype-specific detailing to allow accurate models of any given class member throughout their working lives, the performance of these new V2s is just as impressive as their appearance. A powerful coreless motor and flywheel is incorporated into the diecast locomotive chassis, powering the driving wheels which run in separate metal bearings. With electrical pickup from the driving wheels and tender wheels and the option to have traction tyres fitted to one driving wheelset, this new V2 is on a steady footing as soon as it hits the rails. With a Next18 DCC decoder socket and pre-fitted speaker located in the tender, this model is future proofed for those wishing to operate on DCC, with or without sound. What’s more, a SOUND FITTED version is also available providing realistic sound effects on both analogue and DCC straight out of the box! Detail Variations Specific To This Model: Pristine BR Lined Black Early Emblem livery Running No. 60845 Original ‘Monobloc’ Cylinder Casting with Inside Steam Pipes BR Smokebox Door with Numberplate and with Higher Top Lamp Bracket Later Style Rocker Arm Guides Group Standard Tender with High-Front/Low-Rear Coal Space Dividers Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 141mm Coreless motor with flywheel Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Sprung front pony truck Cartazzi truck with flanged wheelset (with side swing for operational necessity) Optional traction tyres fitted to the rear driving wheels (replacement wheelset without traction tyres supplied in the accessory pack) Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front pony truck Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater Speaker installed in the tender of all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LNER V2 Class using recordings from real locomotives - N Scale

Bachmann Class 117 3-Car DMU R334 BR Green (Small Yellow Panels) DCC S/F

Class 117 3-Car DMU R334 BR Green (Small Yellow Panels) R334 DCC Sound Fitted Detail Variations Specfic To This Model: Pristine BR Green (Small Yellow Panels) Livery Set No. R334 3-Car Unit comprising DMBS No. W51334, TCL No. W59486 and DMS No. W51376 Destination Blinds for Reading and Paddington Original Cab Fronts without Marker or Tail Lights Glazed Headcode Boxes displaying Headcodes 2A25 & 2A60 Full Height Cab Handrails As built, without Corridor Connectors Cut Buffers Original Bogies One-Piece Exhaust at the Corridor End on the DMBS and DMS Vehicles Features: Equipped with a PLUX 22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 816mm Two motorised vehicles (DMBS and DMS) each fitted with three pole motors and a flywheel providing drive to the inner bogie Four axle drive (two driven axles in each of the DMBS and DMS vehicles) Separate metal bearings fitted to each driven axle Trailing axles run in metal pinpoint bearings Electrical pickup from all wheels Diecast metal, multi-stage gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each outer bogie on the DMBS and DMS vehicles Conductive couplings with integral close coupling mechanisms fitted between vehicles Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels* and high intensity headlights*, switchable on/off independently at either end via the chassis-mounted switches or via dedicated DCC functions (*where applicable to the prototype being modelled) Separately illuminated destination panels, switchable on/off independently at either end via the chassis-mounted switches or via dedicated DCC functions Passenger saloon lighting – switchable on/off via the chassis-mounted switches or via a dedicated DCC function Cab interior lighting – switchable on/off via the chassis-mounted switches or via a dedicated DCC function Authentic light colours and temperatures selected for each lighting application Two speakers fitted, one in each of the DMBS and DMS vehicles, for optimum sound reproduction – fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Class 117 DMU using recordings from real units - Era 5 - OO Scale

Bachmann Class 09 09106 DB Red (Unbranded) DCC Deluxe S/F

Class 09 09106 DB Red (Unbranded) 09106 DCC Deluxe Sound Fitted Details Variations Specific To This Model: Pristine DB Red (Unbranded) livery Running No. 09106 Box Profile Main Frames Concealed Bodyside Door Hinges Radiator Ladders Removed Steel Cab Door OLEO Buffers Dual Brakes 2 Front Marker Lights (with rounded bottom housings) 2 Front Lamp Irons (middle pair removed) 2 Rear Marker Lights (with rounded bottom housings) 2 Rear Lamp Irons (middle pair removed) Standard Cab Panel (without Stiffening Ribs) Whistle Cab Roof Radio Pod Equipment Boxes (RHS) with Raised Doors and Recessed Latches External Fuel Pump Air Compressor Cabinet (LHS) Buckeye Coupler Fitted Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 122mm Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at both ends Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Fully operational front and rear lights with two, four or six lights dependent on the prototype being modelled Eight microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configuration of the front and rear lights when operated on DCC or Analogue control Shunting lights (one red and one white light at each end) operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control Front and rear lights can be turned on/off independently via two dedicated functions on DCC, or using two easy access microswitches on Analogue control Authentic light colours and temperatures selected for each model based on era and application A quality speaker employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Sound files produced specifically for the Bachmann Branchline Class 08 using recordings from real locomotives The Class 08 Diesel Shunter was BR’s most numerous diesel locomotive type (totalling more than 1,000 examples alongside its Class 09 and Class 10 counterparts) and models of this icon have long been a staple of the Bachmann Branchline range. However, this brand-new 08 owes nothing to its predecessors and finally brings the story of the humble diesel shunter right up to date with this most accurate of OO scale renditions. Constructed from high fidelity mouldings, the new Branchline model employs a wealth of separately fitted details, including various metal components, and offers countless combinations of details and variations to allow individual locomotives to be modelled accurately at a chosen time in history. This external beauty is brought to life by the exquisite livery application which uses true-to-prototype colours, fonts and logos – extending beyond the exterior to the cab interior which itself is highly detailed and decorated accordingly. Meanwhile, ‘under the bonnet’ the model boasts a high specification that utilises the latest advancements in model railway technology. For the first time a full suite of lighting, including up to 13 separate lights, is fitted and can be enjoyed by both analogue and DCC users – whilst the new shunter is the first model to employ Bachmann’s Bach-Up stay alive system, providing DCC users with a reserve power supply for uninterrupted running even on dirty or uneven track. - Era 7 - OO Scale

Graham Farish Class 158 2-Car DMU 158816 BR Regional Railways DCC S/F

The Class 158 is one of British Rail’s most successful second generation Diesel Multiple Units (DMUs); first introduced in 1989, all but one of the original units remain in traffic to this day. This all-new Graham Farish model follows in the footsteps of the brand’s award winning Class 319 Electric Multiple Unit and captures this iconic prototype to a tee. The pinnacle of N scale second generation DMUs, the Graham Farish Class 158 combines high fidelity bodyshells with an underframe that’s adorned with separate components depicting the engines, electrical equipment, and auxiliary gear. It’s the livery application which really brings these models to life and every element has been replicated in miniature. Whilst the main colours are spray painted, the myriad smaller logos, symbols and lettering are applied using a specialist printing process, using BR and corporate specification fonts, logos and colours. Driven by the low-level drive mechanism, each vehicle sports uninterrupted views of the interior which is fitted out with tables, chairs and even metal luggage racks – made visible thanks to the saloon lighting. The inter-vehicle coupling system ensure that the two vehicles work together in harmony and enables the use of a single decoder for DCC operation. Fitting that decoder couldn’t be easier thanks to the clip-off underframe panel behind which the decoder socket is fitted and combined with the pre-fitted speaker, it’s easy to fit sound to your model Features: Pristine BR Regional Railways livery Running No. 158816 Two-Car Unit comprising car Nos. 52816 & 57816 Destination blinds for Milford Haven Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B Length 315mm Coreless, twin shaft motor with two flywheels providing drive to both bogies of the DMS (A) vehicle Four axle drive (all axles on the DMS (A) vehicle) Electrical pickup from all wheels Highly detailed bodyshell with flush, tinted glazing Unobstructed interior including seat and table detail Bogies constructed from multiple components featuring full relief detail Separately applied underframe equipment and detail components Separately applied metal detail parts, including exhaust guards and interior luggage racks Each model is supplied with an accessory pack comprising exhaust pipes and cab end connector door covers (where appropriate) Directional lighting, including illuminated destination panels, switchable on/off at either end on DCC or Analogue control Cab and saloon interior lighting, switchable on/off via the under-chassis switches Authentic light colours and temperatures selected for each model based on era and application Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Detail Variations Specific To This Model: Original Air Conditioning Toilet Discharge via Coupler Box (Car A Only) Perkins Engine Original Heather Standard Air Dam Original Light Cluster Gangway Doors with Small Windows - Era 8 - N Scale

Graham Farish Class 14 D2/9531 NCB British Oak Orange & Black Sound Fitted

Class 14 D2/9531 NCB British Oak Orange & Black - Sound Fitted Features: Locomotive is now Preserved Pristine NCB British Oak Orange & Black livery Running No. D2/9531 Accessory Pack NEM Coupling Pockets Powerful Coreless Motor Speaker Fitted SOUND FITTED - Fitted with a Zimo MS590N18 Sound Decoder Length 72mm - Era 6 - N Scale Affectionately known as the ‘Tedy Bears’, these N scale models cram all of the charm and character of their full size counterparts into a small package and now, for the first time, feature a Next18 DCC decoder socket making it easy to fit a decoder and enjoy these models on DCC. The highly detailed bodyshell is adorned with separately fitted handrails, lamps and other small parts, whilst the prominent footsteps hang from the running plate on both sides. The wasp stripes at either end, expertly applied using specialist printing techniques, make this model unmissable and below them, the bufferbeam can be configured with standard N scale couplings, or with a full depth bufferbeam and a full complement of pipework if standard couplings are not required.  

Graham Farish Class 158 2-Car DMU, 158856 Central Trains (DCC Sound fitted)

Class 158 2-Car DMU, 158856 Central Trains (DCC Sound Fitted) Includes: - Pristine Central Trains livery - Running No. 158856 - Two-Car Unit comprising car Nos. 52856 & 57856 - Destination blinds for Leicester - Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B - Coreless, twin shaft motor with two flywheels providing drive to both bogies of the DMS (A) vehicle - Electrical pickup from all wheels - Working miniature BSI Couplings at the cab ends (alternative air dams are included to allow this feature to work on second radius curves or less) - Designed to operate on curves of second radius (263.5mm) or greater - Separately applied metal detail parts, including exhaust guards and interior luggage racks - Each model is supplied with an accessory pack comprising exhaust pipes and cab end connector door covers (where appropriate)   Detail Variations Specific To This Model: - Radio Pod on Roof - Revised Air Conditioning (Type B) - Toilet Discharge via Coupler Box (Car A Only) - Perkins Engine - Revised Heather - Standard Air Dam - Sanding Gear Fitted - Original Light Cluster - Gangway Doors with Small Windows   Lighting: Directional lighting, including illuminated destination panels, switchable on/off at either end on DCC or Analogue control Cab and saloon interior lighting, switchable on/off via the under-chassis switches Authentic light colours and temperatures selected for each model based on era and application   DCC: Next18 DCC decoder interface – one decoder required per unit Easy-access DCC decoder socket located behind removable panel on underside of DMS (B)   Sound: - Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions SOUND FITTED models operate on DCC and Analogue control as supplied   Livery Application: - Authentic liveries applied to both vehicles including interior decoration - Multiple paint applications employed using BR and corporate specification colours - Logos, numerals and text added as appropriate using multi-stage tampo printing using authentic typefaces, logos and colours  

Graham Farish The Thanet Flyer SOUND FITTED Train Set

The Thanet Flyer SOUND FITTED Train Set  A Graham Farish Train Set is the perfect entry into the wonderful world of model railways. Each train set includes everything you need to get up and running so why not indulge today and start your journey towards building your own masterpiece in miniature. Arguably most famous for its commuter services, the Southern Railway also transported scores of people from the cities and the suburbs to holiday destinations by the sea, including the idyllic Thanet resorts of Broadstairs, Margate and Ramsgate. Rekindle the joys of summer holidays with this set and take the Thanet Flyer to start your holiday, complete with locomotive and coaches each carrying the vibrant Malachite Green livery with ‘Sunshine’ markings! This SOUND FITTED train set is supplied with a SE&CR N Class Steam Locomotive which is pre-fitted with a Sound Decoder (manufactured by Zimo), allowing the model to produce realistic sounds when placed on the track and with power applied. What’s more, should you wish to replace the analogue controller supplied with this set with a Digital Command Control (DCC) unit, your model is pre-loaded with a full suite of sound effects which can be controlled at the press of a button when used with a DCC system. Includes: - SE&CR N Class 1854 SR Malachite Green livery   - Locomotive features:   - SOUND FITTED   - Metal coal load    - Detail cab and body detailing - SR Bulleid Composite Corridor SR Malachite Green livery - SR Bulleid Brake Third Semi-Open SR Malachite Green livery - Analogue Controller (decorated in black and yellow with Graham Farish logo) - Power Supply - Oval of Track - Power Clip - N Scale

Graham Farish Class 90/0 90017 Rail Express Systems Quality Assured' DCC Sound

Class 90/0 90017 Rail Express Systems Quality Assured' DCC Sound Fitted  The award winning Class 90 returns to the Graham Farish range twelve months after its grand unveiling. A pinnacle of British N scale Electric Locomotives, this example depicts No. 90017 ‘Rail Express Systems Quality Assured’ in Rail Express Systems livery and comes complete with SOUND FITTED. Combining a highly accurate and detailed body shell with an authentic chassis and bogies, plus a fine reproduction of the Brecknell Willis high-speed Pantograph – the Graham Farish Class 90 captures the distinctive shape and character of the real locomotives to a tee. Add to this the impressive technical specification which includes a coreless motor with twin flywheels, all wheel drive and all wheel pickup, plus directional lights and, when used on DCC, cab lights too, and it’s easy to see why this model is the complete package. this SOUND FITTED model will take your enjoyment to the next level with its authentic sound effects which only enhance the model’s good looks! FEATURES: Pristine Rail Express Systems livery Named ‘Rail Express Systems Quality Assured’ Running No. 90017 SOUND FITTED - Fitted with a ESU Loksound V5DDC Sound Decoder Length 126mm DETAIL VARIATIONS SPECIFIC TO THIS MODEL: Original ‘Clipped’ Buffers (Pantograph end) / Round (Non-Pantograph end) Rubbing Plates Buckeye Couplings TDM Cables fitted to the Buffer Sides Small Battery Charger Battery Boxes and Switch with Smooth Sides and Sliding Access - Era 9 - N Scale

Graham Farish Class 90/0 90048 Freightliner G&W - DCC Sound

Class 90/0 90048 Freightliner G&W - DCC Sound Fitted The award winning Class 90 returns to the Graham Farish range twelve months after its grand unveiling. A pinnacle of British N scale Electric Locomotives, this example is decorated in the orange, yellow and black scheme of Freightliner Genesee & Wyoming, depicting No. 90048 and is supplied with SOUND FITTED. Combining a highly accurate and detailed body shell with an authentic chassis and bogies, plus a fine reproduction of the Brecknell Willis high-speed Pantograph – the Graham Farish Class 90 captures the distinctive shape and character of the real locomotives to a tee. Add to this the impressive technical specification which includes a coreless motor with twin flywheels, all wheel drive and all wheel pickup, plus directional lights and, when used on DCC, cab lights too, and it’s easy to see why this model is the complete package this SOUND FITTED model will take your enjoyment to the next level with its authentic sound effects which only enhance the model’s good looks! FEATURES: Pristine Freightliner G&W livery Running No. 90048 SOUND FITTED - Fitted with a ESU Loksound V5DDC Sound Decoder Length 126mm DETAIL VARIATIONS SPECIFIC TO THIS MODEL: Rectangular Freight Buffers Screw link Couplings TDM Cables fitted to the Buffer Sides Large Battery Charger Battery Boxes and Switch with Hinged Access Panels which are Ribbed - Era 9 - N Scale

Graham Farish Class 90/1 90139 BR Railfreight Distribution Sector DCC Sound

Class 90/1 90139 BR Railfreight Distribution Sector - DCC Sound Fitted The award winning Class 90 returns to the Graham Farish range twelve months after its grand unveiling. A pinnacle of British N scale Electric Locomotives, this model is finished as No. 90139 in BR Railfreight Distribution Sector livery complete with SOUND FITTED. Combining a highly accurate and detailed body shell with an authentic chassis and bogies, plus a fine reproduction of the Brecknell Willis high-speed Pantograph – the Graham Farish Class 90 captures the distinctive shape and character of the real locomotives to a tee. Add to this the impressive technical specification which includes a coreless motor with twin flywheels, all wheel drive and all wheel pickup, plus directional lights and, when used on DCC, cab lights too, and it’s easy to see why this model is the complete package. this SOUND FITTED model will take your enjoyment to the next level with its authentic sound effects which only enhance the model’s good looks! FEATURES: Pristine BR Railfreight Distribution Sector livery Running No. 90139 SOUND FITTED - Fitted with a ESU Loksound V5DDC Sound Decoder Length 126mm DETAIL VARIATIONS SPECIFIC TO THIS MODEL: Original ‘Clipped’ Buffers Rubbing Plates Screw Link Couplings TDM Cables fitted to the Buffer Sides Small Battery Charger Battery Boxes and Switch with Hinged Access Panels which are Ribbed - Era 8 - N Scale

Graham Farish Class 90/0 90002 'Mission: Impossible' Virgin Trains DCC Sound

Class 90/0 90002 'Mission: Impossible' Virgin Trains (Original) - DCC Sound Fitted  The award winning Class 90 returns to the Graham Farish range twelve months after its grand unveiling. A pinnacle of British N scale Electric Locomotives, this example depicts No. 90002 ‘Mission: Impossible’ in original Virgin Trains livery complete with SOUND FITTED. Combining a highly accurate and detailed body shell with an authentic chassis and bogies, plus a fine reproduction of the Brecknell Willis high-speed Pantograph – the Graham Farish Class 90 captures the distinctive shape and character of the real locomotives to a tee. Add to this the impressive technical specification which includes a coreless motor with twin flywheels, all wheel drive and all wheel pickup, plus directional lights and, when used on DCC, cab lights too, and it’s easy to see why this model is the complete package this SOUND FITTED model will take your enjoyment to the next level with its authentic sound effects which only enhance the model’s good looks! FEATURES: Pristine Virgin Trains (Original) livery Named ‘Mission: Impossible’ Running No. 90002 SOUND FITTED - Fitted with a ESU Loksound V5DDC Sound Decoder Length 126mm DETAIL VARIATIONS SPECIFIC TO THIS MODEL: Original ‘Clipped’ Buffers Rubbing Plates Buckeye Couplings TDM Cables fitted to the Buffer Sides Large Battery Charger Battery Boxes and Switch with Smooth Sides and Sliding Access - Era 9 - N Scale

Graham Farish Class 90/0 90006 'High Sheriff' BR InterCity (Swallow) DCC Sound

Class 90/0 90006 'High Sheriff' BR InterCity (Swallow) - DCC Sound Fitted The award winning Class 90 returns to the Graham Farish range twelve months after its grand unveiling. A pinnacle of British N scale Electric Locomotives, this model is finished as No. 90006 ‘High Sheriff’ in BR InterCity Swallow livery complete with SOUND FITTED. Combining a highly accurate and detailed body shell with an authentic chassis and bogies, plus a fine reproduction of the Brecknell Willis high-speed Pantograph – the Graham Farish Class 90 captures the distinctive shape and character of the real locomotives to a tee. Add to this the impressive technical specification which includes a coreless motor with twin flywheels, all wheel drive and all wheel pickup, plus directional lights and, when used on DCC, cab lights too, and it’s easy to see why this model is the complete package. this SOUND FITTED model will take your enjoyment to the next level with its authentic sound effects which only enhance the model’s good looks! FEATURES: Pristine BR InterCity (Swallow) livery Named ‘High Sheriff’ Running No. 90006 SOUND FITTED - Fitted with a ESU Loksound V5DDC Sound Decoder Length 126mm DETAIL VARIATIONS SPECIFIC TO THIS MODEL: Original ‘Clipped’ Buffers Rubbing Plates Buckeye Couplings TDM Cables fitted to the Buffer Sides Large Battery Charger Battery Boxes and Switch with Smooth Sides and Sliding Access - Era 8 - N Scale

Graham Farish Class 90/0 90042 Freightliner 'PowerHaul' DCC Sound Fitted

Class 90/0 90042 Freightliner 'PowerHaul' Includes: - Sound Fitted - Pristine Freightliner ‘Powerhaul’ livery - Running No. 90042 - Rectangular Freight Buffers - Screw link Couplings - TDM Cables fitted to the Buffer Sides - Large Battery Charger - Battery Boxes and Switch with Hinged Access Panels which are Ribbed - Coreless, twin shaft motor with two flywheels providing drive to both bogies - All axle drive - Electrical pickup from all wheels - Separate metal bearings fitted to each axle - Accessory Bag - N scale Locomotive information and history: Fifty Class 90 locomotives were ordered by British Rail in 1986 to replace the ageing Class 85 fleet on West Coast Main Line duties, whilst also allowing BR to cascade a number of Class 86s to East Anglia. Constructed at British Rail Engineering Limited, Crewe, the new locomotives were initially classified as 87/2s however this was soon changed to Class 90 as the design featured a completely new body-shell – although much of the technology within was shared with the Class 87s. Construction of the 110mph rated locomotives was completed in 1990 and the fleet was split between different sectors of British Rail – 15 were allocated to InterCity services, five for Rail Express Systems (mail and parcels traffic) and the remaining 30 for Railfreight Distribution. Most of those allocated to Railfreight Distribution would later be downgraded to 75mph and reclassified as 90/1s numbered in the 901xx series following work to isolate the Electric Train Heating and push-pull equipment making them dedicated freight locos. Upon privatisation the Class 90 fleet was split between Virgin Trains, EWS and Freightliner. By 1999 all of the Class 90/1s acquired by EWS had been converted back to 90/0s due to an increased requirement for passenger locomotives to work contracted ScotRail sleeper trains and for hire to GNER for East Coast Main Line services. Further renumbering by EWS occurred when nine locos were fitted with different brake blocks and these became Class 90/2s numbered in the 902xx series. The Freightliner locos were also converted back to their original specification in the early 2000s. The Class 90s have carried numerous liveries including three decorated in European liveries for the Freightconnection event in 1992 which coincided with the opening of the Channel Tunnel to freight services. No. 90128 was decorated in SNCB turquoise (Belgium), No. 90129 in DB red (Germany) and No. 90130 in SNCF orange and grey (France) and each carried the name Freightconnection in their respective languages, alongside No. 90022 which was named ‘Freightconnection’ and carried Railfreight Distribution livery. The majority of the Class have carried names whilst in service and the 90s have appeared a variety of other post-Privatisation liveries such as GNER, DB Schenker, First ScotRail, One (Anglia), Greater Anglia, National Express, DRS and Malcolm Logistics. Today, Class 90s remain in operation with Freightliner, DB Cargo UK (ex-EWS/DB Schenker) and most recently Locomotive Services which has acquired Nos. 90001 and 90002 and repainted them into InterCity Swallow livery for use on charters and excursions.

Graham Farish Class 60 60100 'Midland Railway - Butterley' DB Cargo S/Fitted

Class 60 60100 'Midland Railway - Butterley' DB Cargo Sound Fitted   MODEL FEATURES: Pristine DB Cargo livery Running No. 60100 Named ‘Midland Railway - Butterley’ Accessory pack NEM Coupling Pockets Powerful Coreless Motor Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each (*when used on DCC) SOUND FITTED – Fitted with a Zimo MS590N18 Sound Decoder – See below for the function list Length 144mm - Era 9 - N Scale

Graham Farish Class 08 08785 Freightliner G&W S/F

Class 08 08785 Freightliner G&W S/F Features: Era 9 Pristine Freightliner G&W livery Running No. 08785 Accessory Pack NEM Coupling Pockets Powerful Coreless Motor Speaker Fitted DCC SOUND FITTED - Fitted with a Zimo MX659N18 Sound Decoder  - N Scale

Graham Farish Class 08 08833 'Liverpool Street Pilot' BR/GER Lined Blue S/F

Class 08 08833 'Liverpool Street Pilot' BR/GER Lined Blue S/F Features: Era 8 Pristine GER/BR Lined Blue (Early Emblem) livery Running No. 08833 Named ‘Liverpool Street Pilot’ Accessory Pack NEM Coupling Pockets Powerful Coreless Motor Speaker Fitted DCC SOUND FITTED - Fitted with a Zimo MX659N18 Sound Decoder - N Scale

Graham Farish Class 60 60044 'Ailsa Craig' Mainline Freight Sound Fitted

Class 60 60044 'Ailsa Craig' Mainline Freight Features: Accessory pack NEM Coupling Pockets Powerful Coreless Motor DCC Sound Fitted – Fitted with a Zimo MZ659N18 Sound Decoder Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each (*when used on DCC) - N Scale    

Graham Farish Class 08 08950 'Neville Hill 1st' BR InterCity Sound Fitted

Class 08 08950 'Neville Hill 1st' BR InterCity (Swallow) Includes - Pristine BR Executive Intercity Livery - Running No. 08950 - Accessory Pack - NEM Coupling Pockets - Powerful Coreless Motor - Speaker Fitted - DCC SOUND FITTED - Fitted with a Zimo MX659N18 Sound Decoder - N Scale Locomotive information and history: The first diesel shunters were pioneered by the LMS which began trialling designs during the 1930s. It soon became apparent that this form of traction offered many advantages over the steam locomotive – the former being ‘ready to use’ as and when required, whereas steam locos had to be kept at the ready even when not required immediately – with the obvious staffing and fuel costs associated with doing so. By the time of Nationalisation in 1948, the LMS had built various shunters and the 12033 series was adopted by BR as the basis for a new standard design of diesel-electric shunting locomotive. As a stop gap whilst the Class 08 was being developed, BR constructed further 12033 series locomotives and these would later be designated as Class 11s. Production of the 08s began in 1952 with the first example, No. 13000, entering traffic in 1953. Construction continued until 1962 and during the ten year period, 996 locomotives were built making the Class 08 the most numerous of all British locomotive classes. In addition, construction of the near-identical Class 09s (26 examples) and Class 10s (171) took the total well above a thousand – the former differed in having higher gearing whilst the latter had different engines and transmission. Built ‘in-house’ at BR’s Crewe, Darlington, Derby, Doncaster and Horwich Works, the 08s were allocated across the BR regions, with many being based at major stations and terminals where stock was marshalled and positioned ready for service, where trains were divided or merged, and of course at many freight facilities. Although they had a top speed of just 15 mph, what the 08s lacked in speed they more than made up for with tractive effort which was more than double that of the 03s and 04s. Although the first example was withdrawn in 1967, just four had gone prior to the introduction of TOPS and despite an ever-decreasing need for shunting locomotives, around a quarter of the Class remained in traffic at the start of the 21st century. Upon Privatisation of British Rail in 1994, EWS inherited many of the survivors, with others going to passenger operators for use as depot shunters. More than a decade later EWS was still operating over 40 of the shunters, with many more in store. Even today, Class 08s can still be found earning their keep at numerous depots, freight facilities and railway workshops. Meanwhile, ever since the first withdrawals Class 08s have been popular machines with heritage railways and today, more than 70 have found a new lease of life in preservation – often carrying out similar tasks to those for which they were designed some seven decades ago.

Graham Farish Class 150/2 2-Car DMU 150236 Arriva Trains Wales DCC Sound

Class 150/2 2-Car DMU 150236 Arriva Trains Wales (Revised) Includes - DCC SOUND FITTED - Working Directional Lights - Interior Lighting - Highly detailed Cab Ends - Plough detail - Accessory bag - N Scale