Bachmann GCR 9J (J11) 64305 BR Black (Early Emblem) (Sound Fitted)

GCR 9J (J11) 64305 BR Black (Early Emblem) (Sound Fitted) The Great Central Railway was a big mover of goods and amongst the locomotives it built for this purpose were the 9J 0-6-0s. Upon becoming part of the LNER in 1924 the 9Js were reclassified as J11s and this designation stayed remained into British Railways life and until withdrawal. Nicknamed ‘Pom Poms’ because their exhaust noise sounded very similar to the guns of the same name, these freight workhorses are replicated in OO scale by Bachmann Branchline. The J11s carried all the hallmarks of a locomotive designed by the GCR’s Chief Mechanical Engineer John G. Robinson and these features are replicated on the Branchline model using a precision moulded boiler, smokebox and firebox mounted on a diecast metal running plate. The distinctive Robinson cab is another high-fidelity moulding, within which boiler backhead is replicated using an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. The GCR tender has a distinctive look too with its high capacity and flared top edges, and again these trademark features are captured in miniature using high-fidelity mouldings. Coupling to the locomotive via a drawbar that is adjustable to suit individual layout conditions, electrical connections are integrated into it and a hinged fallplate is also fitted to the tender. Across the model separate components are added, from the metal handrails and sprung metal buffers, to the lamp irons at the front and rear, to complete the look of this freight machine. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. The black colour scheme is replicated with the usual care and attention that you expect from Bachmann Branchline, resulting in a paint finish that is rich and consistent throughout. Details like the running number, plates and plaques are then added using precision printing techniques for full authenticity. The Branchline J11 runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine BR Black Early Emblem livery Running No. 64305 Riveted Smokebox Door with Twin Handwheels, Numberplate and Lamp Iron mounted on the Smokebox Door LNER ‘Plantpot’ Chimney Snifter Valve LNER lowered Dome Ross Pop Safety Valves Parallel Buffer Shanks with End Collars Wakefield Lubricator (fitted to the left hand side) Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 220mm (over couplings) - OO Scale

Bachmann NER E Tank 495 NER Lined Green & Maroon (Sound Fitted)

NER E Tank 495 NER Lined Green & Maroon (Sound Fitted) Details on this model: Pristine NER Lined Green & Maroon Livery Running No. 495 Boiler Clack Valves Ramsbottom Safety Valves Bell Whistle Steam Brakes Only Plain Smokebox Door Twin Smokebox Door Handles Parallel Shank Buffers with Round Mounts Original Bunker without Coal Rails Rear Cab Windows without Bars Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless motor Electrical pickup from all wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate with integral side tank weights Precision moulded plastic boiler, side tanks, cab and bunker Separately applied details including splashers, tank filler hatches, safety valves, dome and chimney, smokebox handles, clack valves* and vacuum pipes* (*where applicable) Individual metal detail components including handrails, handrail knobs, guard irons, lamp irons and turned metal whistle Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted regulator, reverser and handbrake Running gear detailing includes springs, brakes and separately fitted brake gear, sandboxes and sandpipes Glazed cab spectacles Sprung metal buffers Each model supplied with an accessory pack including cab doors, additional bufferbeam pipework, poseable lamps and three-link couplings Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED models are used on analogue) Speaker installed in all models for optimum sound reproduction ESU Loksound Micro V5DCC Sound Decoder fitted to SOUND FITTED versions - OO Scale

Bachmann NER E (J71) Tank 317 LNER Lined Black (Sound Fitted)

NER E (J71) Tank 317 LNER Lined Black (Sound Fitted) Details on this model: Pristine LNER Lined Black Livery Running No. 317 Boiler Clack Valves Ramsbottom Safety Valves Pipe Whistle Steam Brakes Only Plain Smokebox Door Smokebox Door Handwheel Parallel Shank Buffers with Round Mounts Coal Bunker with Coal Rails fitted Rear Cab Windows without Bars Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless motor Electrical pickup from all wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate with integral side tank weights Precision moulded plastic boiler, side tanks, cab and bunker Separately applied details including splashers, tank filler hatches, safety valves, dome and chimney, smokebox handles, clack valves* and vacuum pipes* (*where applicable) Individual metal detail components including handrails, handrail knobs, guard irons, lamp irons and turned metal whistle Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted regulator, reverser and handbrake Running gear detailing includes springs, brakes and separately fitted brake gear, sandboxes and sandpipes Glazed cab spectacles Sprung metal buffers Each model supplied with an accessory pack including cab doors, additional bufferbeam pipework, poseable lamps and three-link couplings Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED models are used on analogue) Speaker installed in all models for optimum sound reproduction ESU Loksound Micro V5DCC Sound Decoder fitted to SOUND FITTED versions - OO Scale

Bachmann NER E (J71) Tank 68260 BR Black (Early Emblem) (Sound Fitted)

NER E (J71) Tank 68260 BR Black (Early Emblem) (Sound Fitted) Details on this model: Pristine BR Black Early Emblem Livery Running No. 68260 Boiler Clack Valves Removed Ross Pop Safety Valves with Cover Pipe Whistle Steam Brakes Only Smokebox Door with Numberplate Twin Smokebox Door Handles Group Standard Buffers with Square Mounts Coal Bunker with Coal Rails fitted Rear Cab Windows with Bars fitted Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless motor Electrical pickup from all wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate with integral side tank weights Precision moulded plastic boiler, side tanks, cab and bunker Separately applied details including splashers, tank filler hatches, safety valves, dome and chimney, smokebox handles, clack valves* and vacuum pipes* (*where applicable) Individual metal detail components including handrails, handrail knobs, guard irons, lamp irons and turned metal whistle Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted regulator, reverser and handbrake Running gear detailing includes springs, brakes and separately fitted brake gear, sandboxes and sandpipes Glazed cab spectacles Sprung metal buffers Each model supplied with an accessory pack including cab doors, additional bufferbeam pipework, poseable lamps and three-link couplings Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED models are used on analogue) Speaker installed in all models for optimum sound reproduction ESU Loksound Micro V5DCC Sound Decoder fitted to SOUND FITTED versions - OO Scale

Bachmann LMS 8F with Riveted Tender 8036 LMS Black (Sound Fitted)

LMS 8F with Riveted Tender 8036 LMS Black (Sound Fitted) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Pristine LMS Black Livery Running No. 8036 Riveted Stanier 4,000-gallon Tender Smokebox Door with Small Numberplate High Front Lamp Iron (Top) Curved Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Riveted Tender 8233 LMS Black (Sound Fitted Deluxe)

LMS 8F with Riveted Tender 8233 LMS Black (Sound Fitted Deluxe) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Locomotive is now Preserved Pristine LMS Black Livery Running No. 8233 Riveted Stanier 4,000-gallon Tender Smokebox Door with Small Numberplate High Front Lamp Iron (Top) Curved Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Riveted Tender 8233 LMS Black (Sound Fitted)

LMS 8F with Riveted Tender 8233 LMS Black (Sound Fitted) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Locomotive is now Preserved Pristine LMS Black Livery Running No. 8233 Riveted Stanier 4,000-gallon Tender Smokebox Door with Small Numberplate High Front Lamp Iron (Top) Curved Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Welded Tender 48305 BR Black (Early Emblem) (SF)

LMS 8F with Welded Tender 48305 BR Black (Early Emblem) (Sound Fitted) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Locomotive is now Preserved Pristine BR Black (Early Emblem) Livery Running No. 48305 Welded Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights AWS Equipment Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Welded Tender 48305 BR Black (Early Emblem) (SFD)

LMS 8F with Welded Tender 48305 BR Black (Early Emblem) (Sound Fitted Deluxe) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Locomotive is now Preserved Pristine BR Black (Early Emblem) Livery Running No. 48305 Welded Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights AWS Equipment Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Welded Tender 48703 BR Black (Late Crest) (SF)

LMS 8F with Welded Tender 48703 BR Black (Late Crest) (Sound Fitted) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Pristine BR Black (Late Crest) Livery Running No. 48703 Welded Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted Low on the Smokebox and with External Pipework Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights AWS Equipment Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Welded Tender 48703 BR Black (Late Crest) (SFD)

LMS 8F with Welded Tender 48703 BR Black (Late Crest) (Sound Fitted Deluxe) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Pristine BR Black (Late Crest) Livery Running No. 48703 Welded Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted Low on the Smokebox and with External Pipework Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights AWS Equipment Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Riveted Tender 48339 BR Black (Late Crest) [W] (SF)

LMS 8F with Riveted Tender 48339 BR Black (Late Crest) [W] (Sound Fitted) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Weathered BR Black (Late Crest) Livery Running No. 48339 Riveted Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted Low on the Smokebox and with External Pipework Raised Bufferbeam Rivets Cast Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Riveted Tender 48339 BR Black (Late Crest) [W] (SFD)

LMS 8F with Riveted Tender 48339 BR Black (Late Crest) [W] (Sound Fitted Deluxe) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Weathered BR Black (Late Crest) Livery Running No. 48339 Riveted Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted Low on the Smokebox and with External Pipework Raised Bufferbeam Rivets Cast Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Riveted Tender 8036 LMS Black (Sound Fitted Deluxe)

LMS 8F with Riveted Tender 8036 LMS Black (Sound Fitted Deluxe) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Pristine LMS Black Livery Running No. 8036 Riveted Stanier 4,000-gallon Tender Smokebox Door with Small Numberplate High Front Lamp Iron (Top) Curved Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Rapido UK LNER J52/2 '68846' BR Lined Black (Late Emblem) (Sound Fitted)

LNER J52/2 '68846' BR Lined Black (Late Emblem) (Sound Fitted) Features: No.68846 BR lined black (late crest) Cast tapered chimney Pop-type safety valves Short dome Parallel buffers Pole-type front step 4 handrail knobs Closed bunker coal rails Smokebox numberplate Can motor Flywheel Plunger pickups Sprung buffers Detailed cab interior Firebox glow Factory-fitted speaker Optional scale couplings Diecast chassis block Next18 decoder socket - OO Scale

Rapido UK LNER J52/2 '4217' LNER Plain Black (Sound Fitted)

LNER J52/2 '4217' LNER Plain Black (Sound Fitted) Features: No.4217 LNER black (shaded lettering) Cast tapered chimney Pop-type safety valves Tall dome Tapered buffers Plate-type front step 3 handrail knobs Closed bunker coal rails Can motor Flywheel Plunger pickups Sprung buffers Detailed cab interior Firebox glow Factory-fitted speaker Optional scale couplings Diecast chassis block Next18 decoder socket - OO Scale

Bachmann LNWR G2 9446 LMS Black (Sound Fitted)

LNWR G2 9446 LMS Black (Sound Fitted) The London & North Western Railway (LNWR) was known as the Premier Line and one of its premier freight locomotives, in terms of power and ability at least, was the G2 Class, and their later equivalents, the G2As. The Bachmann Branchline model brings the G2 to OO Scale with a high fidelity rendition of the early-twentieth century powerhouse and comes complete with SOUND FITTED. This model of No. 9446 forms part of our new Railway Celebrations range and depicts the locomotive that took part in the 100th Anniversary celebrations of the opening of the Stockton & Darlington Railway. In 1925, to mark the centenary, a celebration of railways featuring locomotives from the past century was put on by the London & North Eastern Railway (LNER). Opened by the Duke and Duchess of York – later King Geroge VI and Queen Elizabeth – a procession of locomotives took place over some six miles of line between Stockton and Darlington, passing the royal grandstand and delighting the hundreds of thousands of onlookers who turned out to witness the celebrations. The parade of 53 locomotives intended to showcase the evolution of the steam locomotive, from the early examples to modern designs. The first London & North Western Railway (LNWR) 0-8-0 locomotives were built in 1893, however the G2 was somewhat younger, being built between 1921 and 1922 and No. 9446 was one of 60 locomotives built to this design at Crewe Works. Outshopped as LNWR No. 1012, the locomotive was the first G2 to receive London, Midland & Scottish Railway (LMS) numbering, becoming No. 9446 which was applied in June 1925, along with LMS livery with a high gloss finish in preparation for its participation in the centenary celebrations. No. 9446 would become BR No. 49446 upon Nationalisation in 1948 and the locomotive remained in traffic until April 1964 when it was withdrawn and subsequently scrapped. The Bachmann Branchline model employs a diecast running plate, along with further metal components to provide an impressive weight ensuring the model’s strength and power match its prototype’s. Meanwhile, those components produced in plastic are precision moulded, with details such as rivets and boiler bands crisply reproduced. Separate parts are then added to enhance the authenticity of the model further, from the metal handrails to the whistle and safety valves, each of which are turned brass. The smokebox door is hinged and can be posed open or closed, whilst within the cab, controls, dials and pipework are all moulded authentically and decorated accordingly. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. Driving wheels are cast to the correct LNWR pattern, whilst the third pair of driving wheels are flangeless, as on the real locomotives. Moving to the tender and the locomotive to tender drawbar is adjustable to suit individual layout conditions, whilst electrical connections are incorporated into the drawbar and a poseable fallplate is fitted to the tender – not only is this a prototypical feature but it serves to reduce the visual impact of any gap in this area which may be necessitated by operating conditions. The tender itself is finely moulded, with several separately applied details including the lamp irons, tank vents, fire tool holder and handwheels. A realistic coal load is included whilst the tender chassis includes brake rigging and metal wheelsets are employed. Whilst there is little to complicate the black livery of this freight locomotive, the paintwork is applied to a high standard throughout, with the printed details, including the numberplate and cab dials, all reproduced and fully legible thanks to the specialist printing techniques implemented in the production of Bachmann models.  Features: Pristine LMS Black livery Running No. 9446 Smokebox Door Handwheel Adjustable Tender Drawbar Powerful 3 Pole Motor NEM Coupling Pockets Sprung Buffers Accessory Pack Speaker Fitted SOUND FITTED – Fitted with a ESU Loksound V5DCC 21 Pin DCC Sound Decoder – See below for the function list Length 231mm (over couplings) Part of our Railway Celebrations range - Era 3 - OO Scale  

Accurascale Hunslet Austerity HC1775 BR Black Early Emblem 68025 - DCC Sound

Hunslet Austerity HC1775 BR Black Early Emblem 68025 - DCC Sound This locomotive was one of a batch of 36 Austerities by Hudswell Clarke of Leeds. This particular one was completed in November 1944 and carried the WD number 71498. Purchased by the LNER in June 1946 the locomotive was classified as a J94 and numbered 8025. The distinctive extended bunker was fitted in November 1949 when it was renumbered 68025 and gained the early BR emblem. The locomotive was based at Darlington 51A until withdrawal in 1963. The locomotive did not survive and was cut up shortly after. The model replicates the period after 1949 and carries the extended bunker, smokebox numberplate and additional steps and handrails on the tank Features: Highly detailed 0-6-0ST 00 gauge model, 1:76.2 scale on 16.5mm track Minimum Radius 438mm (2nd radius set track) RP25-110 profile 00 gauge wheels Coreless motor with flywheel geared for maximum performance and slow speed running Die-cast metal chassis and pickups to all wheels. Next18 DCC ready or ESU LokSound V5 sound fitted, slot mounted in smokebox PowerPack capacitor for uninterrupted power Two quality sugar cube speakers contained in sound capsule located for best possible sound. Small, flexible neck NEM coupler mounts set at correct height, with mini-tension-lock couplers. Brake rigging factory fitted Brake blocks aligned with wheels Scale width wire handrails and sand pipes Fully detailed cab interior with twin LED pulsing/steady Firebox glow Etched metal/plastic detail parts, including grab handles, steps, pipework, lamp irons etc. Sliding roof ventilator Etched metal pre-painted name plates and works plates. Fully sprung metal buffers, factory-installed pipework and screw/3 link couplings Magnetically removable smoke box door for DCC decoder access - OO Scale

Graham Farish LNER V2 4791 LNER Lined Green (Original) DCC Sound Fitted

LNER V2 4791 LNER Lined Green (Original) 4791 DCC Sound Fitted Some twenty years since the V2 was first produced in N scale by Graham Farish, this all-new model of the LNER Mixed Traffic icon is made to standards not even dreamt of twenty years ago. Often described as ‘the engines that won the war’, these new Graham Farish models are sure to win the heart of any discerning N scale enthusiast. Depicting one of the LNER’s most successful steam locomotive designs, this masterpiece in miniature captures the look and the character of the prototype to a tee. With highly detailed mouldings and many separate parts used on both the locomotive and tender, including era- and prototype-specific detailing to allow accurate models of any given class member throughout their working lives, the performance of these new V2s is just as impressive as their appearance. A powerful coreless motor and flywheel is incorporated into the diecast locomotive chassis, powering the driving wheels which run in separate metal bearings. With electrical pickup from the driving wheels and tender wheels and the option to have traction tyres fitted to one driving wheelset, this new V2 is on a steady footing as soon as it hits the rails. With a Next18 DCC decoder socket and pre-fitted speaker located in the tender, this model is future proofed for those wishing to operate on DCC, with or without sound. What’s more, a SOUND FITTED version is also available providing realistic sound effects on both analogue and DCC straight out of the box! Detail Variations Specific To This Model: Pristine LNER Lined Green (Original) livery Running No. 4791 Original ‘Monobloc’ Cylinder Casting with Inside Steam Pipes LNER Smokebox Door without Numberplate and with Lower Top Lamp Bracket Later Style Rocker Arm Guides Group Standard Tender with High-Front/Low-Rear Coal Space Dividers Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 141mm Coreless motor with flywheel Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Sprung front pony truck Cartazzi truck with flanged wheelset (with side swing for operational necessity) Optional traction tyres fitted to the rear driving wheels (replacement wheelset without traction tyres supplied in the accessory pack) Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front pony truck Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater Speaker installed in the tender of all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LNER V2 Class using recordings from real locomotives - N Scale

Graham Farish LNER V2 60845 BR Lined Black (Early Emblem) DCC S/F

LNER V2 60845 BR Lined Black (Early Emblem) 60845 DCC Sound Fitted Some twenty years since the V2 was first produced in N scale by Graham Farish, this all-new model of the LNER Mixed Traffic icon is made to standards not even dreamt of twenty years ago. Often described as ‘the engines that won the war’, these new Graham Farish models are sure to win the heart of any discerning N scale enthusiast. Depicting one of the LNER’s most successful steam locomotive designs, this masterpiece in miniature captures the look and the character of the prototype to a tee. With highly detailed mouldings and many separate parts used on both the locomotive and tender, including era- and prototype-specific detailing to allow accurate models of any given class member throughout their working lives, the performance of these new V2s is just as impressive as their appearance. A powerful coreless motor and flywheel is incorporated into the diecast locomotive chassis, powering the driving wheels which run in separate metal bearings. With electrical pickup from the driving wheels and tender wheels and the option to have traction tyres fitted to one driving wheelset, this new V2 is on a steady footing as soon as it hits the rails. With a Next18 DCC decoder socket and pre-fitted speaker located in the tender, this model is future proofed for those wishing to operate on DCC, with or without sound. What’s more, a SOUND FITTED version is also available providing realistic sound effects on both analogue and DCC straight out of the box! Detail Variations Specific To This Model: Pristine BR Lined Black Early Emblem livery Running No. 60845 Original ‘Monobloc’ Cylinder Casting with Inside Steam Pipes BR Smokebox Door with Numberplate and with Higher Top Lamp Bracket Later Style Rocker Arm Guides Group Standard Tender with High-Front/Low-Rear Coal Space Dividers Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 141mm Coreless motor with flywheel Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Sprung front pony truck Cartazzi truck with flanged wheelset (with side swing for operational necessity) Optional traction tyres fitted to the rear driving wheels (replacement wheelset without traction tyres supplied in the accessory pack) Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front pony truck Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater Speaker installed in the tender of all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LNER V2 Class using recordings from real locomotives - N Scale

Accurascale LNER J69 359 (7359) LNER Lined Black - DCC Sound

LNER J69 359 (7359) LNER Lined Black - Sound Fitted Includes: - SOUND FITTED VERSION   - NOTE: To use this model, you MUST have a Digital (DCC) Controller in order to operate functions. - Scale length of 110.66mm over headstocks, 36mm across body. - Minimum Radius Operation: 438mm (2nd radius set-track). - Die-cast metal chassis and boiler, target weight in the region of 260g-275g. - Factory fitted brake rigging. - All wheel pickup, DCC ready with stay alive arrangement. - Fully detailed cab area, with easily removable roof, fixed by magnets. - Fully detailed bunker area. - Moveable roof ventilator. - Eroded metal/plastic detail parts, including grab handles, steps, buffer pipework, lamp irons etc. - Brass turned whistles/valves fitted. - Etched metal pre-painted numberplates and plaques (where applicable). - Fully sprung metal buffers, factory-installed pipework, and screw couplings. - Accurate liveries including fully lined where applicable, and detailed crests/emblems. - Magnetically removable smoke box door for access to decoder. - Small, flexible neck NEM compliant coupler mounts set at correct height, with mini-tension-lock couplers. - Factory installed DCC Sound option, with two quality sugarcube speakers contained in sound capsules located for best possible sound, in the side tanks (DCC Sound models only). - Flickering/steady Firebox glow (depending on DCC fitting). - Large coreless motor, for a haulage capacity of not less than 1kg, from a standing start, on a 3% incline. - Helical gear box for maximum performance and slow speed running. - Gearing arranged so locomotive can achieve a scale maximum top speed of 50 mph (80 kmh). - OO Scale

Accurascale Late BR J68 68646 Plain Black - DCC Sound

Late BR J68 68646 Plain Black - Sound Fitted  Includes: - SOUND FITTED VERSION   - NOTE: To use this model, you MUST have a Digital (DCC) Controller in order to operate functions. - Scale length of 110.66mm over headstocks, 36mm across body. - Minimum Radius Operation: 438mm (2nd radius set-track). - Die-cast metal chassis and boiler, target weight in the region of 260g-275g. - Factory fitted brake rigging. - All wheel pickup, DCC ready with stay alive arrangement. - Fully detailed cab area, with easily removable roof, fixed by magnets. - Fully detailed bunker area. - Moveable roof ventilator. - Eroded metal/plastic detail parts, including grab handles, steps, buffer pipework, lamp irons etc. - Brass turned whistles/valves fitted. - Etched metal pre-painted numberplates and plaques (where applicable). - Fully sprung metal buffers, factory-installed pipework, and screw couplings. - Accurate liveries including fully lined where applicable, and detailed crests/emblems. - Magnetically removable smoke box door for access to decoder. - Small, flexible neck NEM compliant coupler mounts set at correct height, with mini-tension-lock couplers. - Factory installed DCC Sound option, with two quality sugarcube speakers contained in sound capsules located for best possible sound, in the side tanks (DCC Sound models only). - Flickering/steady Firebox glow (depending on DCC fitting). - Large coreless motor, for a haulage capacity of not less than 1kg, from a standing start, on a 3% incline. - Helical gear box for maximum performance and slow speed running. - Gearing arranged so locomotive can achieve a scale maximum top speed of 50 mph (80 kmh). - OO Scale