Graham Farish GWR 49XX 'Hall' 4936 'Kinlet Hall' BR Lined Green (Late) (N)

GWR 49XX 'Hall' 4936 'Kinlet Hall' BR Lined Green (Late) The Great Western Railway (GWR) was famous for its variety of 4-6-0 steam locomotive classes, and none were more numerous and successful than the 49XX ‘Hall’ Class. After a long period of absence from the Graham Farish range, the ‘Hall’ makes a triumphant return for 2025 with this brand new model that has been designed from the rails up to produce a masterpiece in miniature befitting of such an iconic prototype. These mixed traffic machines were found across the Great Western network and beyond. Constructed from a multitude of high-fidelity parts and decorated with an exquisite paint finish, the new Graham Farish ‘Hall’ has an impressive technical specification to match. Employing a powerful coreless motor to drive the wheels through a diecast metal gearbox, electrical pickup comes from all driving and tender wheels and separate metal bearings are fitted to the driving wheel axles assuring smooth and reliable running. The tender houses a speaker and Next18 DCC decoder socket, making it easy to add sound Details: Locomotive is Preserved Pristine BR Lined Green (Late Crest) Livery Running No. 4936 Named ‘Kinlet Hall’ Collett 4,000-gallon Tender BR Smokebox Door with Numberplate and Shedplate Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Speaker installed in the tender of all models for optimum sound reproduction Length 141mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater - N Scale

Graham Farish GWR 49XX 'Hall' 4962 'Ragley Hall' BR Lined Green (Early) (N)

GWR 49XX 'Hall' 4962 'Ragley Hall' BR Lined Green (Early) The Great Western Railway (GWR) was famous for its variety of 4-6-0 steam locomotive classes, and none were more numerous and successful than the 49XX ‘Hall’ Class. After a long period of absence from the Graham Farish range, the ‘Hall’ makes a triumphant return for 2025 with this brand new model that has been designed from the rails up to produce a masterpiece in miniature befitting of such an iconic prototype. These mixed traffic machines were found across the Great Western network and beyond. Constructed from a multitude of high-fidelity parts and decorated with an exquisite paint finish, the new Graham Farish ‘Hall’ has an impressive technical specification to match. Employing a powerful coreless motor to drive the wheels through a diecast metal gearbox, electrical pickup comes from all driving and tender wheels and separate metal bearings are fitted to the driving wheel axles assuring smooth and reliable running. The tender houses a speaker and Next18 DCC decoder socket, making it easy to add sound Details: Pristine BR Lined Green (Early Emblem) Livery Running No. 4962 Named ‘Ragley Hall’ Collett 4,000-gallon Tender BR Smokebox Door with Numberplate and Shedplate Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Speaker installed in the tender of all models for optimum sound reproduction Length 141mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater - N Scale

Graham Farish GWR 'Modified Hall' 6960 'Raveningham Hall' GWR Lined Green (N)

GWR 'Modified Hall' 6960 'Raveningham Hall' GWR Lined Green The Great Western Railway (GWR) was famous for its variety of 4-6-0 steam locomotive classes, and none were more numerous and successful than the 49XX ‘Hall’ Class. The type was later developed to create the 6959 ‘Modified Hall’ Class which continued the successes of the ‘Halls’, operating from the final years of the GWR and throughout the British Railways period until steam ended on the Western Region in December 1965 yet N scale models of these iconic machines have never been produced, until now! Developed alongside the brand new ‘Halls’ for the Graham Farish range, these masterpieces in miniature have been created through extensive research and detailed surveys of the preserved locomotives, of which there are several. The mixed traffic machines were found across the GWR network and beyond. Constructed from a multitude of high-fidelity parts and decorated with an exquisite paint finish, the new Graham Farish ‘Modified Hall’ has an impressive technical specification to match. Employing a powerful coreless motor to drive the wheels through a diecast metal gearbox, electrical pickup comes from all driving and tender wheels and separate metal bearings are fitted to the driving wheel axles assuring smooth and reliable running. The tender houses a speaker and Next18 DCC decoder socket, making it easy to add sound Details: Locomotive is Preserved Pristine GWR Lined Green (Great (crest) Western) Livery Running No. 6960 Named ‘Raveningham Hall’ Collett 4,000-gallon Tender GWR Smokebox Door without Numberplate Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Speaker installed in the tender of all models for optimum sound reproduction Length 141mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater - N Scale

Graham Farish GWR 'Modified Hall' 7904 'Fountains Hall' BR Lined Black (N)

GWR 'Modified Hall' 7904 'Fountains Hall' BR Lined Black The Great Western Railway (GWR) was famous for its variety of 4-6-0 steam locomotive classes, and none were more numerous and successful than the 49XX ‘Hall’ Class. The type was later developed to create the 6959 ‘Modified Hall’ Class which continued the successes of the ‘Halls’, operating from the final years of the GWR and throughout the British Railways period until steam ended on the Western Region in December 1965 yet N scale models of these iconic machines have never been produced, until now! Developed alongside the brand new ‘Halls’ for the Graham Farish range, these masterpieces in miniature have been created through extensive research and detailed surveys of the preserved locomotives, of which there are several. The mixed traffic machines were found across the GWR network and beyond. Constructed from a multitude of high-fidelity parts and decorated with an exquisite paint finish, the new Graham Farish ‘Modified Hall’ has an impressive technical specification to match. Employing a powerful coreless motor to drive the wheels through a diecast metal gearbox, electrical pickup comes from all driving and tender wheels and separate metal bearings are fitted to the driving wheel axles assuring smooth and reliable running. The tender houses a speaker and Next18 DCC decoder socket, making it easy to add sound Details: Pristine BR Lined Black (Early Emblem) Livery Running No. 7904 Named ‘Fountains Hall’ Collett 4,000-gallon Tender BR Smokebox Door with Numberplate and Shedplate Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Speaker installed in the tender of all models for optimum sound reproduction Length 141mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater - N Scale

Dapol NER Class E1 (LNER J72) '2173' NER Lined Black (N)

NER Class E1 (LNER J72) '2173' NER Lined Black First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '2183' LNER Pre-War Black (N)

LNER J72 '2183' LNER Pre-War Black First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '68723' BR Black (Early) (Newcastle Station Pilot) (N)

LNER J72 '68723' BR Black (Early) (Newcastle Station Pilot) First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '68736' BR Lined Apple Green (York Station Pilot) (N)

LNER J72 '68736' BR Lined Apple Green (York Station Pilot) First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '68745' BR Black (Early) (N)

LNER J72 '68745' BR Black (Early) First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '69007' BR Black (Late) (N)

LNER J72 '69007' BR Black (Late) First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '69023' BR Lined Apple Green (Preserved) (N)

LNER J72 '69023' BR Lined Apple Green (Preserved)  First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '8680' LNER Lined Green (N)

LNER J72 '8680' LNER Lined Green First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Hornby LNER Class A4 4498 'Sir Nigel Gresley' LNER Garter Blue (TT)

LNER Class A4 4498 'Sir Nigel Gresley' LNER Garter Blue Built at the Doncaster works in 1937, 4498 Sir Nigel Gresley entered service in October 1937 on the London and Northeast Railway.  This model represents the locomotive in 1930’s condition with full valances and in its classic Garter blue paint scheme. A HM7000-Next18 sound decoder can be fitted for digital control and realistic A4 Class sound effects using the free to download A4 sound profile. Specific to TT3043: A4 locomotive 4498 in Garter blue with ‘Sir Nigel Gresley’ Name plates. Single Chimney. Full valances. 1928 Corridor Tender. Common TT A4 Class Features: High detail TT Scale model based on extensive research including and original works drawings. Heavy diecast chassis. Model Weight is 150 grams. High precision coreless motor. Brass axle bearings. Locomotive and Tender wheel electrical pickups. Kinematic rear coupling system. Pre-fitted acoustic speaker chamber and Sugarcube speaker. Next-18 Decoder socket. Metal buffers. Separately fitted brass safety valves and whistle. Separately fitted metal handrails. Accessory bag contains optional fit flanged trailing track wheelset, vacuum pipes and couplings. - TT:120 Scale

Hornby BR Class 43 HST Virgin Trains Train Pack (TT)

BR Class 43 HST Virgin Trains Train Pack 43093 ‘Lady in Red’ & 43097 Bringing the speed and style of the late 1990s to TT:120 scale, the Virgin Trains Class 43 HST Train Pack, contains a motorised and unmotorised power cars numbered 43093 ‘Lady in Red’ and 43097 in their bold red and white livery. This newly tooled model captures the sleek, aerodynamic design of the HST, complete with accurately reproduced branding and detailing.  A powerful 5-pole skew wound motor delivers smooth and reliable performance, while directional lighting, brings an extra touch of realism. Interior lighting highlights the detail inside, creating an immersive experience whether running at full speed or waiting at the platform, with an 18-pin DCC Ready socket and NEM tension lock couplings to ensure easy connection with additional rolling stock.  Pair the Virgin Class 43 HST Train Pack with Virgin HST Mk3 coaches for a realistic high-speed setup. Includes: 1x Powered BR Class 43 43093 'Lady in Red' 1x Dummy BR Class 43 43097 - DCC Ready NEXT-18 Decoder Socket - TT:120 Scale

Graham Farish Class 47/8 47849 BR InterCity (Swallow) (N)

Class 47/8 47849 BR InterCity (Swallow)  The Class 47 was British Railways’ most prolific class of main-line diesel locomotive and so it’s no surprise that high fidelity models of these ever-popular machines are available in N Scale as part of the flagship Graham Farish range. Such was their success that Class 47s went through various upgrade and refurbishment programmes during their careers, to extend their lives or ready them for new services, resulting in various sub-classes being used to group locomotives that had undergone the same work, or were built with similar features, such as the Class 47/4s which were those locomotives fitted with Electric Train Heating (ETH). Whilst not an official sub-class, some Class 47/4s were fitted with extended range fuel tanks allowing them to work longer distances and such machines were identified by being renumbered into the 478xx series. With their larger fuel tanks, these Class 47s were put to work on cross country routes and following Privatisation, the 47/8s were used by Virgin Cross Country. No. 47849 received its extended range fuel tanks in 1990 and was renumbered from 47570, remaining in InterCity livery long into Privatisation before it was repainted into Virgin colours in 2000 and so making this locomotive suitable for both Era 8 and Era 9 operations. Our new InterCity model takes full advantage to the recent upgrades that have benefited the Graham Farish Class 47, namely the technical advancements which see the model boasting a Next18 DCC decoder interface, pre-fitted speaker, cab lighting (when used on DCC) and independent control of the directional lights at each end. Features: Pristine BR InterCity (Swallow) livery Running No. 47849 Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 139mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from eight wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities Bogie-mounted coupling pockets to NEM355 standards at each end Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail Separately applied detail parts, including lamp irons, cab handrails and roof aerial (where applicable) Separately fitted battery box/water/fuel tank assembly Cab Interior Detailing Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting, switchable on/off (when used on DCC only) Speaker installed in all models for optimum sound reproduction Details Specific to this Model: Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Cut-Cab Locomotive Cab-Front-mounted ETH Equipment Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Kickplate below Car Door Partially Plated Cab Roof Vents Serck Radiator Grilles Smooth Exhaust Panels Plated Clayton Roof Boiler Port Water Tanks Removed Later Extended Range Fuel Tanks NRN Aerials Plated Bogie-mounted Cab Steps - Era 8 - N Scale

Graham Farish Class 47/4 47555 'The Commonwealth Spirit' RF Distribution (N)

Class 47/4 47555 'The Commonwealth Spirit' BR RF Distribution European The Class 47 was British Railways’ most prolific class of main-line diesel locomotive and so it’s no surprise that high fidelity models of these ever-popular machines are available in N Scale as part of the flagship Graham Farish range. Such was their success that Class 47s served on the front line of BR services for many decades and even in the 1990s, some 30+ years after their introduction, they were still being used for top link services, like hauling the Royal Train or in this case, as part of the fleet used for freight services via the then brand new Channel Tunnel linking the UK and the mainland Europe. The Railfreight Distribution European livery, as distinguished by the large lettering on the bodyside and blue roof, was introduced in the mid-1990s and was applied to distinguish those locomotives allocated to traffic flows serving Dollands Moor and the Channel Tunnel Freight Services, which used the Channel Tunnel from its opening in 1994. Class 47/4 No. 47555 ‘The Commonwealth Spirit’, which was something of a celebrity with spotters and enthusiasts, was one of the locomotives selected for this pool and was repainted resplendently into the new livery by Tinsley which added its Yorkshire Rose depot motif to the cab sides in the process. ‘The Commonwealth Spirit’ takes full advantage to the recent upgrades that have benefited the Graham Farish Class 47, namely the technical advancements which see the model boasting a Next18 DCC decoder interface, pre-fitted speaker, cab lighting (when used on DCC) and independent control of the directional lights at each end. Features: Pristine BR Railfreight Distribution European livery Running No. 47555 Named ‘The Commonwealth Spirit’ Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 139mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from eight wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities Bogie-mounted coupling pockets to NEM355 standards at each end Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail Separately applied detail parts, including lamp irons, cab handrails and roof aerial (where applicable) Separately fitted battery box/water/fuel tank assembly Cab Interior Detailing Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting, switchable on/off (when used on DCC only) Speaker installed in all models for optimum sound reproduction Details Specific to this Model: Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Cab-Front-mounted ETH Equipment Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Smooth Exhaust Panels Plated Spanner Mk3 Boiler Port Water Tanks Removed NRN Aerials Plated Bogie-mounted Cab Steps - Era 8 - N Scale

Hornby BR Class 50 50049 'Defiance' GBRf (TT)

GBRf Class 50 'Defiance' 50049 - DCC Ready NEXT18-Pin Socket - Era 11  - TT:120 Scale

Accurascale Hunslet Austerity VF5300 NCB North East 59

Hunslet Austerity VF5300 NCB North East 59 This Austerity was another wartime product, this time from the Vulcan foundry, Newton-le-Willows. It was completed in 1945 and allocated the WD number 75310. Following war dept service, the locomotive was purchased by the NCB and allocated to number 6 area, North West Durham. Particular to this area is the cut back cabs on all locomotives for working the restricted clearance of the tunnel on the entrance to Lambton coal drops at the port of Sunderland. Another smaller feature on this locomotive was the relocation of the injectors to above the running plate ahead of the cab. Both of these features are faithfully recreated on the model Features: Highly detailed 0-6-0ST 00 gauge model, 1:76.2 scale on 16.5mm track Minimum Radius 438mm (2nd radius set track) RP25-110 profile 00 gauge wheels Coreless motor with flywheel geared for maximum performance and slow speed running Die-cast metal chassis and pickups to all wheels. Next18 DCC ready or ESU LokSound V5 sound fitted, slot mounted in smokebox PowerPack capacitor for uninterrupted power Two quality sugar cube speakers contained in sound capsule located for best possible sound. Small, flexible neck NEM coupler mounts set at correct height, with mini-tension-lock couplers. Brake rigging factory fitted Brake blocks aligned with wheels Scale width wire handrails and sand pipes Fully detailed cab interior with twin LED pulsing/steady Firebox glow Etched metal/plastic detail parts, including grab handles, steps, pipework, lamp irons etc. Sliding roof ventilator Etched metal pre-painted name plates and works plates. Fully sprung metal buffers, factory-installed pipework and screw/3 link couplings Magnetically removable smoke box door for DCC decoder access - OO Scale

Accurascale Hunslet Austerity WGB2762 United Steel Company 18

Hunslet Austerity WGB2762 United Steel Company 18 This attractively liveried Austerity was built in 1945 by W. G. Bagnall in Stafford and was one of the 377 locomotives built for the War Department and originally carried the number 75174. When demobbed, the locomotives was purchased by the United Steel Companies and put to work on the steelworks system at Scunthorpe. Externally a virtually standard Austerity, our model carries the heavy duty “Yorkshire” buffers that were fitted to the prototype when it was in service. Features: Highly detailed 0-6-0ST 00 gauge model, 1:76.2 scale on 16.5mm track Minimum Radius 438mm (2nd radius set track) RP25-110 profile 00 gauge wheels Coreless motor with flywheel geared for maximum performance and slow speed running Die-cast metal chassis and pickups to all wheels. Next18 DCC ready or ESU LokSound V5 sound fitted, slot mounted in smokebox PowerPack capacitor for uninterrupted power Two quality sugar cube speakers contained in sound capsule located for best possible sound. Small, flexible neck NEM coupler mounts set at correct height, with mini-tension-lock couplers. Brake rigging factory fitted Brake blocks aligned with wheels Scale width wire handrails and sand pipes Fully detailed cab interior with twin LED pulsing/steady Firebox glow Etched metal/plastic detail parts, including grab handles, steps, pipework, lamp irons etc. Sliding roof ventilator Etched metal pre-painted name plates and works plates. Fully sprung metal buffers, factory-installed pipework and screw/3 link couplings Magnetically removable smoke box door for DCC decoder access - OO Scale

Accurascale Hunslet Austerity HC1775 BR Black Early Emblem 68025

Hunslet Austerity HC1775 BR Black Early Emblem 68025 This locomotive was one of a batch of 36 Austerities by Hudswell Clarke of Leeds. This particular one was completed in November 1944 and carried the WD number 71498. Purchased by the LNER in June 1946 the locomotive was classified as a J94 and numbered 8025. The distinctive extended bunker was fitted in November 1949 when it was renumbered 68025 and gained the early BR emblem. The locomotive was based at Darlington 51A until withdrawal in 1963. The locomotive did not survive and was cut up shortly after. The model replicates the period after 1949 and carries the extended bunker, smokebox numberplate and additional steps and handrails on the tank Features: Highly detailed 0-6-0ST 00 gauge model, 1:76.2 scale on 16.5mm track Minimum Radius 438mm (2nd radius set track) RP25-110 profile 00 gauge wheels Coreless motor with flywheel geared for maximum performance and slow speed running Die-cast metal chassis and pickups to all wheels. Next18 DCC ready or ESU LokSound V5 sound fitted, slot mounted in smokebox PowerPack capacitor for uninterrupted power Two quality sugar cube speakers contained in sound capsule located for best possible sound. Small, flexible neck NEM coupler mounts set at correct height, with mini-tension-lock couplers. Brake rigging factory fitted Brake blocks aligned with wheels Scale width wire handrails and sand pipes Fully detailed cab interior with twin LED pulsing/steady Firebox glow Etched metal/plastic detail parts, including grab handles, steps, pipework, lamp irons etc. Sliding roof ventilator Etched metal pre-painted name plates and works plates. Fully sprung metal buffers, factory-installed pipework and screw/3 link couplings Magnetically removable smoke box door for DCC decoder access - OO Scale

Hornby Inter-City 125 High Speed Train Set (TT)

Inter-City 125 High Speed Train Set This train set includes: Class 43 HST power car numbered E43063 Class 43 HST dummy car numbered E43062 two Mk3 TS coaches numbered E42064 and E42065 a transformer a train controller a buffer stop a full curve a power straight a standard straight a 3rd full curve a left-hand point a re-railer. No.E43062 No. E43062 was built by British Rail Engineering Limited at Crewe in September 1977 and was outshopped in a BR blue and grey livery. The locomotive was first allocated to the Bounds Green (BN) depot and 43062 was initially part of the 254004 set. It was repainted in an InterCity Swallow livery after a few years in service. As British Railways prepared to be privatised, it sold its HSTs to Virgin in 1997, including 43062. The Class 43 locomotive was repainted in a Virgin red and black livery for use on CrossCountry services. Virgin handed over ten HST power cars in 2002. 43062 was given to Network Rail for use as part of the New Measurement Train (NMT). The locomotive was outshopped in a bright Network Rail yellow livery and because of this, the train was often referred to as the ‘Flying Banana’. The NMT travels at 125mph to monitor and record any faults on the track. 43062 was named ‘John Armitt’ after the chairman of the UK’s National Infrastructure Commission and had a red nameplate fitted. Loram UK won a Network Rail £8-million five-year contract to maintain the NMT in 2020. 43062 was recently overhauled at Loram Derby and returned to traffic in January 2024 with No. 43257 at the rear. No. E43063 No. E43063 was built by British Rail Engineering Limited at Crewe in September 1977 and outshopped in a BR blue and grey livery. The locomotive was first allocated to the Bounds Green (BN) depot and 43063 was initially part of the 254004 set. On 18th May 1991, 43063 could be seen at the Laira depot in a repainted InterCity Swallow livery and continued in service with this livery until 1997. As British Railways prepared to be privatised, it sold its HSTs to Virgin in 1997. 43063 was the first locomotive to be repainted in a Virgin CrossCountry red and black livery. Hon. Lord James Douglas-Hamilton QC & MP named the locomotive ‘Maiden Voyager’ to mark the launch of Virgin CrossCountry services, the same name given to Virgin’s first jumbo jet. Nameplates were fitted at Edinburgh station on 6th January 1997. 43063 ran in service with this name until the nameplates were removed in October 1999. In 2002, Virgin handed over 43063 to FGW who repainted it in a FGW blue and purple livery. Between 2006 and 2007, the locomotive faced an overhaul at Brush Traction and was fitted with an MTU 16V4000 R41 engine. FGW was renamed Great Western Railway in September 2015 and 43063 continued in service under the new name. Six GWR Class 43 HST power cars were stored at the Laira depot in 2020 and 43063 was among them, becoming a spares donor. - TT:120 Scale

Graham Farish Class 158 2-Car DMU 158729, ScotRail Saltire

The Class 158 is one of British Rail’s most successful second generation Diesel Multiple Units (DMUs); first introduced in 1989, all but one of the original units remain in traffic to this day. This all-new Graham Farish model follows in the footsteps of the brand’s award winning Class 319 Electric Multiple Unit and captures this iconic prototype to a tee. The pinnacle of N scale second generation DMUs, the Graham Farish Class 158 combines high fidelity bodyshells with an underframe that’s adorned with separate components depicting the engines, electrical equipment, and auxiliary gear. It’s the livery application which really brings these models to life and every element has been replicated in miniature. Whilst the main colours are spray painted, the myriad smaller logos, symbols and lettering are applied using a specialist printing process, using BR and corporate specification fonts, logos and colours. Driven by the low-level drive mechanism, each vehicle sports uninterrupted views of the interior which is fitted out with tables, chairs and even metal luggage racks – made visible thanks to the saloon lighting. The inter-vehicle coupling system ensure that the two vehicles work together in harmony and enables the use of a single decoder for DCC operation. Fitting that decoder couldn’t be easier thanks to the clip-off underframe panel behind which the decoder socket is fitted and combined with the pre-fitted speaker, it’s easy to fit sound to your model Features: Pristine ScotRail Saltire livery Running No. 158729 Two-Car Unit comprising car Nos. 52729 & 57729 Destination blinds for Dundee Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B Length 315mm Coreless, twin shaft motor with two flywheels providing drive to both bogies of the DMS (A) vehicle Four axle drive (all axles on the DMS (A) vehicle) Electrical pickup from all wheels Highly detailed bodyshell with flush, tinted glazing Unobstructed interior including seat and table detail Bogies constructed from multiple components featuring full relief detail Separately applied underframe equipment and detail components Separately applied metal detail parts, including exhaust guards and interior luggage racks Each model is supplied with an accessory pack comprising exhaust pipes and cab end connector door covers (where appropriate) Directional lighting, including illuminated destination panels, switchable on/off at either end on DCC or Analogue control Cab and saloon interior lighting, switchable on/off via the under-chassis switches Authentic light colours and temperatures selected for each model based on era and application Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Detail Variations Specific To This Model: Radio Pod on Roof Revised Air Conditioning (Type B) Toilet Discharge via CET Tank Cummins Engine Revised Heather Scottish Air Dam Sanding Gear Fitted Revised LED Light Cluster Plated Gangway Doors - Era 9 - N Scale

Graham Farish Class 158 2-Car DMU 158824 Arriva Trains Wales (Revised)

The Class 158 is one of British Rail’s most successful second generation Diesel Multiple Units (DMUs); first introduced in 1989, all but one of the original units remain in traffic to this day. This all-new Graham Farish model follows in the footsteps of the brand’s award winning Class 319 Electric Multiple Unit and captures this iconic prototype to a tee. The pinnacle of N scale second generation DMUs, the Graham Farish Class 158 combines high fidelity bodyshells with an underframe that’s adorned with separate components depicting the engines, electrical equipment, and auxiliary gear. It’s the livery application which really brings these models to life and every element has been replicated in miniature. Whilst the main colours are spray painted, the myriad smaller logos, symbols and lettering are applied using a specialist printing process, using BR and corporate specification fonts, logos and colours. Driven by the low-level drive mechanism, each vehicle sports uninterrupted views of the interior which is fitted out with tables, chairs and even metal luggage racks – made visible thanks to the saloon lighting. The inter-vehicle coupling system ensure that the two vehicles work together in harmony and enables the use of a single decoder for DCC operation. Fitting that decoder couldn’t be easier thanks to the clip-off underframe panel behind which the decoder socket is fitted and combined with the pre-fitted speaker, it’s easy to fit sound to your model Features: Pristine Arriva Trains Wales (Revised) livery Running No. 158824 Two-Car Unit comprising car Nos. 52824 & 57824 Destination blinds for Aberystwyth Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B Length 315mm Coreless, twin shaft motor with two flywheels providing drive to both bogies of the DMS (A) vehicle Four axle drive (all axles on the DMS (A) vehicle) Electrical pickup from all wheels Highly detailed bodyshell with flush, tinted glazing Unobstructed interior including seat and table detail Bogies constructed from multiple components featuring full relief detail Separately applied underframe equipment and detail components Separately applied metal detail parts, including exhaust guards and interior luggage racks Each model is supplied with an accessory pack comprising exhaust pipes and cab end connector door covers (where appropriate) Directional lighting, including illuminated destination panels, switchable on/off at either end on DCC or Analogue control Cab and saloon interior lighting, switchable on/off via the under-chassis switches Authentic light colours and temperatures selected for each model based on era and application Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Detail Variations Specific To This Model: Radio Pod on Roof Revised Air Conditioning (Type A) Toilet Discharge via CET Tank Cummins Engine Revised Heather Scottish Air Dam Sanding Gear Fitted Revised LED Light Cluster Plated Gangway Doors - Era 9 - N Scale

Graham Farish Class 158 2-Car DMU 158750 GWR Green (FirstGroup)

Class 158 2-Car DMU 158750 GWR Green (FirstGroup) Includes: - Pristine GWR (FirstGroup) livery - Running No. 158750 - Two-Car Unit comprising car Nos. 52750 & 57750 - Destination blinds for Penzance - Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B - Coreless, twin shaft motor with two flywheels providing drive to both bogies of the DMS (A) vehicle - Electrical pickup from all wheels - Working miniature BSI Couplings at the cab ends (alternative air dams are included to allow this feature to work on second radius curves or less) - Designed to operate on curves of second radius (263.5mm) or greater - Separately applied metal detail parts, including exhaust guards and interior luggage racks - Each model is supplied with an accessory pack comprising exhaust pipes and cab end connector door covers (where appropriate) Detail Variations Specific To This Model: - Radio Pod on Roof - Revised Air Conditioning (Type A) - Toilet Discharge via CET Tank - Cummins Engine - Revised Heather - Scottish Air Dam - Sanding Gear Fitted - Revised LED Light Cluster - Plated Gangway Doors Lighting: - Directional lighting, including illuminated destination panels, switchable on/off at either end on DCC or Analogue control - Cab and saloon interior lighting, switchable on/off via the under-chassis switches - Authentic light colours and temperatures selected for each model based on era and application DCC: - Next18 DCC decoder interface – one decoder required per unit - Easy-access DCC decoder socket located behind removable panel on underside of DMS (B) Sound: - Speaker installed in all models for optimum sound reproduction - Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions - SOUND FITTED models operate on DCC and Analogue control as supplied Livery Application: - Authentic liveries applied to both vehicles including interior decoration - Multiple paint applications employed using BR and corporate specification colours - Logos, numerals and text added as appropriate using multi-stage tampo printing using authentic typefaces, logos and colours - Era 9 - N Scale

Graham Farish Class 158 2-Car DMU 158711 ScotRail Saltire

Class 158 2-Car DMU 158711 ScotRail Saltire Includes: - Pristine ScotRail Saltire livery - Running No. 158711 - Two-Car Unit comprising car Nos. 52711 & 57711 - Destination blinds for Edinburgh Waverley - Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B - Coreless, twin shaft motor with two flywheels providing drive to both bogies of the DMS (A) vehicle - Electrical pickup from all wheels - Working miniature BSI Couplings at the cab ends (alternative air dams are included to allow this feature to work on second radius curves or less) - Designed to operate on curves of second radius (263.5mm) or greater - Separately applied metal detail parts, including exhaust guards and interior luggage racks - Each model is supplied with an accessory pack comprising exhaust pipes and cab end connector door covers (where appropriate)   Detail Variations Specific To This Model: - Radio Pod on Roof - Revised Air Conditioning (Type B) - Toilet Discharge via CET Tank - Cummins Engine - Revised Heather - Scottish Air Dam - Sanding Gear Fitted - Revised LED Light Cluster - Plated Gangway Doors   Lighting: Directional lighting, including illuminated destination panels, switchable on/off at either end on DCC or Analogue control Cab and saloon interior lighting, switchable on/off via the under-chassis switches Authentic light colours and temperatures selected for each model based on era and application   DCC: Next18 DCC decoder interface – one decoder required per unit Easy-access DCC decoder socket located behind removable panel on underside of DMS (B)   Sound: - Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions SOUND FITTED models operate on DCC and Analogue control as supplied   Livery Application: - Authentic liveries applied to both vehicles including interior decoration - Multiple paint applications employed using BR and corporate specification colours - Logos, numerals and text added as appropriate using multi-stage tampo printing using authentic typefaces, logos and colours  

Graham Farish Class 158 2-Car DMU 158766 GWR Green (FirstGroup)

Class 158 2-Car DMU 158766 GWR Green (FirstGroup) Includes: - Pristine GWR (FirstGroup) livery - Running No. 158766 - Two-Car Unit comprising car Nos. 52766 & 57766 - Destination blinds for Bristol Temple Meads - Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B - Coreless, twin shaft motor with two flywheels providing drive to both bogies of the DMS (A) vehicle - Electrical pickup from all wheels - Working miniature BSI Couplings at the cab ends (alternative air dams are included to allow this feature to work on second radius curves or less) - Designed to operate on curves of second radius (263.5mm) or greater - Separately applied metal detail parts, including exhaust guards and interior luggage racks - Each model is supplied with an accessory pack comprising exhaust pipes and cab end connector door covers (where appropriate)   Detail Variations Specific To This Model: - Radio Pod on Roof - Revised Air Conditioning (Type A) - Toilet Discharge via CET Tank - Cummins Engine - Revised Heather - Scottish Air Dam - Sanding Gear Fitted - Revised LED Light Cluster - Plated Gangway Doors   Lighting: Directional lighting, including illuminated destination panels, switchable on/off at either end on DCC or Analogue control Cab and saloon interior lighting, switchable on/off via the under-chassis switches Authentic light colours and temperatures selected for each model based on era and application   DCC: Next18 DCC decoder interface – one decoder required per unit Easy-access DCC decoder socket located behind removable panel on underside of DMS (B)   Sound: - Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions SOUND FITTED models operate on DCC and Analogue control as supplied   Livery Application: - Authentic liveries applied to both vehicles including interior decoration - Multiple paint applications employed using BR and corporate specification colours - Logos, numerals and text added as appropriate using multi-stage tampo printing using authentic typefaces, logos and colours  

Graham Farish Class 90/0 90017 'Rail Express Systems Quality Assured' RES

Class 90/0 90017 'Rail Express Systems Quality Assured' Rail Express Systems The award winning Class 90 returns to the Graham Farish range twelve months after its grand unveiling. A pinnacle of British N scale Electric Locomotives, this example depicts No. 90017 ‘Rail Express Systems Quality Assured’ in Rail Express Systems livery. Combining a highly accurate and detailed body shell with an authentic chassis and bogies, plus a fine reproduction of the Brecknell Willis high-speed Pantograph – the Graham Farish Class 90 captures the distinctive shape and character of the real locomotives to a tee. Add to this the impressive technical specification which includes a coreless motor with twin flywheels, all wheel drive and all wheel pickup, plus directional lights and, when used on DCC, cab lights too, and it’s easy to see why this model is the complete package. FEATURES: Pristine Rail Express Systems livery Named ‘Rail Express Systems Quality Assured’ Running No. 90017 Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B Length 126mm   DETAIL VARIATIONS SPECIFIC TO THIS MODEL: Original ‘Clipped’ Buffers (Pantograph end) / Round (Non-Pantograph end) Rubbing Plates Buckeye Couplings TDM Cables fitted to the Buffer Sides Small Battery Charger Battery Boxes and Switch with Smooth Sides and Sliding Access - Era 9 - N Scale

Graham Farish Class 90/0 90048 Freightliner G&W

Class 90/0 90048 Freightliner G&W The award winning Class 90 returns to the Graham Farish range twelve months after its grand unveiling. A pinnacle of British N scale Electric Locomotives, this example is decorated in the orange, yellow and black scheme of Freightliner Genesee & Wyoming, depicting No. 90048. Combining a highly accurate and detailed body shell with an authentic chassis and bogies, plus a fine reproduction of the Brecknell Willis high-speed Pantograph – the Graham Farish Class 90 captures the distinctive shape and character of the real locomotives to a tee. Add to this the impressive technical specification which includes a coreless motor with twin flywheels, all wheel drive and all wheel pickup, plus directional lights and, when used on DCC, cab lights too, and it’s easy to see why this model is the complete package. FEATURES: Pristine Freightliner G&W livery Running No. 90048 Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B Length 126mm   DETAIL VARIATIONS SPECIFIC TO THIS MODEL: Rectangular Freight Buffers Screw link Couplings TDM Cables fitted to the Buffer Sides Large Battery Charger Battery Boxes and Switch with Hinged Access Panels which are Ribbed - Era 9 - N Scale

Graham Farish Class 90/1 90139 BR Railfreight Distribution Sector

Class 90/1 90139 BR Railfreight Distribution Sector The award winning Class 90 returns to the Graham Farish range twelve months after its grand unveiling. A pinnacle of British N scale Electric Locomotives, this model is finished as No. 90139 in BR Railfreight Distribution Sector livery. Combining a highly accurate and detailed body shell with an authentic chassis and bogies, plus a fine reproduction of the Brecknell Willis high-speed Pantograph – the Graham Farish Class 90 captures the distinctive shape and character of the real locomotives to a tee. Add to this the impressive technical specification which includes a coreless motor with twin flywheels, all wheel drive and all wheel pickup, plus directional lights and, when used on DCC, cab lights too, and it’s easy to see why this model is the complete package. FEATURES: Pristine BR Railfreight Distribution Sector livery Running No. 90139 Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B Length 126mm   DETAIL VARIATIONS SPECIFIC TO THIS MODEL: Original ‘Clipped’ Buffers Rubbing Plates Screw Link Couplings TDM Cables fitted to the Buffer Sides Small Battery Charger Battery Boxes and Switch with Hinged Access Panels which are Ribbed - Era 8 - N Scale

Graham Farish Class 90/0 90002 'Mission: Impossible' Virgin Trains (Original)

Class 90/0 90002 'Mission: Impossible' Virgin Trains (Original) The award winning Class 90 returns to the Graham Farish range twelve months after its grand unveiling. A pinnacle of British N scale Electric Locomotives, this example depicts No. 90002 ‘Mission: Impossible’ in original Virgin Trains livery. Combining a highly accurate and detailed body shell with an authentic chassis and bogies, plus a fine reproduction of the Brecknell Willis high-speed Pantograph – the Graham Farish Class 90 captures the distinctive shape and character of the real locomotives to a tee. Add to this the impressive technical specification which includes a coreless motor with twin flywheels, all wheel drive and all wheel pickup, plus directional lights and, when used on DCC, cab lights too, and it’s easy to see why this model is the complete package.  FEATURES: Pristine Virgin Trains (Original) livery Named ‘Mission: Impossible’ Running No. 90002 Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B Length 126mm   DETAIL VARIATIONS SPECIFIC TO THIS MODEL: Original ‘Clipped’ Buffers Rubbing Plates Buckeye Couplings TDM Cables fitted to the Buffer Sides Large Battery Charger Battery Boxes and Switch with Smooth Sides and Sliding Access - Era 9 - N Scale

Graham Farish Class 90/0 90042 Freightliner 'PowerHaul'

Class 90/0 90042 Freightliner 'PowerHaul' Includes: - Pristine Freightliner ‘Powerhaul’ livery - Running No. 90042 - Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A - Rectangular Freight Buffers - Screw link Couplings - TDM Cables fitted to the Buffer Sides - Large Battery Charger - Battery Boxes and Switch with Hinged Access Panels which are Ribbed - Coreless, twin shaft motor with two flywheels providing drive to both bogies - All axle drive - Electrical pickup from all wheels - Separate metal bearings fitted to each axle - Accessory Bag - N scale Locomotive information and history: Fifty Class 90 locomotives were ordered by British Rail in 1986 to replace the ageing Class 85 fleet on West Coast Main Line duties, whilst also allowing BR to cascade a number of Class 86s to East Anglia. Constructed at British Rail Engineering Limited, Crewe, the new locomotives were initially classified as 87/2s however this was soon changed to Class 90 as the design featured a completely new body-shell – although much of the technology within was shared with the Class 87s.   Construction of the 110mph rated locomotives was completed in 1990 and the fleet was split between different sectors of British Rail – 15 were allocated to InterCity services, five for Rail Express Systems (mail and parcels traffic) and the remaining 30 for Railfreight Distribution. Most of those allocated to Railfreight Distribution would later be downgraded to 75mph and reclassified as 90/1s numbered in the 901xx series following work to isolate the Electric Train Heating and push-pull equipment making them dedicated freight locos. Upon privatisation the Class 90 fleet was split between Virgin Trains, EWS and Freightliner. By 1999 all of the Class 90/1s acquired by EWS had been converted back to 90/0s due to an increased requirement for passenger locomotives to work contracted ScotRail sleeper trains and for hire to GNER for East Coast Main Line services. Further renumbering by EWS occurred when nine locos were fitted with different brake blocks and these became Class 90/2s numbered in the 902xx series. The Freightliner locos were also converted back to their original specification in the early 2000s. The Class 90s have carried numerous liveries including three decorated in European liveries for the Freightconnection event in 1992 which coincided with the opening of the Channel Tunnel to freight services. No. 90128 was decorated in SNCB turquoise (Belgium), No. 90129 in DB red (Germany) and No. 90130 in SNCF orange and grey (France) and each carried the name Freightconnection in their respective languages, alongside No. 90022 which was named ‘Freightconnection’ and carried Railfreight Distribution livery.   The majority of the Class have carried names whilst in service and the 90s have appeared a variety of other post-Privatisation liveries such as GNER, DB Schenker, First ScotRail, One (Anglia), Greater Anglia, National Express, DRS and Malcolm Logistics. Today, Class 90s remain in operation with Freightliner, DB Cargo UK (ex-EWS/DB Schenker) and most recently Locomotive Services which has acquired Nos. 90001 and 90002 and repainted them into InterCity Swallow livery for use on charters and excursions.

Thomas the Tank Range Thomas The Tank Engine™ w/Moving Eyes DCC Ready

Thomas The Tank Engine Thomas is a blue six-wheeled (0-6-0 Tank) steam engine with the number 1 painted on his side tanks.  Thomas first appeared in 1946 in the 2nd book in Reverend Wilbert Awdry's The Railway Series, entitled 'Thomas the Tank Engine,' and he is the principal character in the 4 stories contained in the book. Thomas's best friends are Percy and Toby.  He works on a branch line with his coaches Annie and Clarabel. All of the locomotives in The Railway Series are based on real historical engines; Thomas has a resemblance to the London, Brighton & South Coast Railway's E2 class of 0-6-0 tank designed by Lawson Billinton in 1913. Includes - moving eyes - realistic resemblance to the character in the series - compatible with OO/HO gauge track and model railways - DCC ready - 3+ compliant  - suitable for young Thomas & Friends(TM) fans - OO Scale