Dapol NER Class E1 (LNER J72) '2173' NER Lined Black (N)

NER Class E1 (LNER J72) '2173' NER Lined Black First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '2183' LNER Pre-War Black (N)

LNER J72 '2183' LNER Pre-War Black First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '68723' BR Black (Early) (Newcastle Station Pilot) (N)

LNER J72 '68723' BR Black (Early) (Newcastle Station Pilot) First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '68736' BR Lined Apple Green (York Station Pilot) (N)

LNER J72 '68736' BR Lined Apple Green (York Station Pilot) First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '68745' BR Black (Early) (N)

LNER J72 '68745' BR Black (Early) First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '69007' BR Black (Late) (N)

LNER J72 '69007' BR Black (Late) First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '69023' BR Lined Apple Green (Preserved) (N)

LNER J72 '69023' BR Lined Apple Green (Preserved)  First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '8680' LNER Lined Green (N)

LNER J72 '8680' LNER Lined Green First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol Class 142 142038 Regional Railways GMPTE (N)

Class 142 142038 Regional Railways GMPTE The British Rail Class 142 is a type of diesel railbus multiple unit designed to run in pairs for use on branch lines in Northern and South Western England and North Wales. Ninety six of the sets were built by BREL at Derby between 1985 and 1987 and followed on from the design of the Class 141. Initially, the Class 142 exhibited many operational problems including the inability to negotiate tight curves, a lack of power with poor braking and a rough uncomfortable ride. The class was extensively modified in subsequent years to overcome some of these shortcomings with the adoption of a more powerful diesel engine, uprated brakes and a plethora of internal and external detail improvements. Even with these changes the Class 142 was deemed unsuitable for working the tighter curves of the South Western rail system and the fleet was transferred post privatisation between NW Trains and Northern Spirit, where they are still used primarily on commuter routes between the major cities of the region.  Features: A Powered and a dummy car in each set  NEXT-18 DCC Decoder Socket Detailed bodies with flush glazing  Close coupling mechanism with corridor connectorScharfenberg coupling mechanism fitted as standard  All wheel drive and pick up on power unit  Directional lights on both carsIndependently controllable internal (where fitted) and external lighting  Accessory bag with optional fitted components  - N Scale

Dapol Class 142 142058 BR Provincial Network Northwest (N)

Class 142 142058 BR Provincial Network Northwest The British Rail Class 142 is a type of diesel railbus multiple unit designed to run in pairs for use on branch lines in Northern and South Western England and North Wales. Ninety six of the sets were built by BREL at Derby between 1985 and 1987 and followed on from the design of the Class 141. Initially, the Class 142 exhibited many operational problems including the inability to negotiate tight curves, a lack of power with poor braking and a rough uncomfortable ride. The class was extensively modified in subsequent years to overcome some of these shortcomings with the adoption of a more powerful diesel engine, uprated brakes and a plethora of internal and external detail improvements. Even with these changes the Class 142 was deemed unsuitable for working the tighter curves of the South Western rail system and the fleet was transferred post privatisation between NW Trains and Northern Spirit, where they are still used primarily on commuter routes between the major cities of the region.  Features: A Powered and a dummy car in each set  NEXT-18 DCC Decoder Socket Detailed bodies with flush glazing  Close coupling mechanism with corridor connectorScharfenberg coupling mechanism fitted as standard  All wheel drive and pick up on power unit  Directional lights on both carsIndependently controllable internal (where fitted) and external lighting  Accessory bag with optional fitted components  - N Scale

Dapol Class 142 142070 First Great Western (exFirst NW Gold Star) (N)

Class 142 142070 First Great Western (exFirst NW Gold Star) The British Rail Class 142 is a type of diesel railbus multiple unit designed to run in pairs for use on branch lines in Northern and South Western England and North Wales. Ninety six of the sets were built by BREL at Derby between 1985 and 1987 and followed on from the design of the Class 141. Initially, the Class 142 exhibited many operational problems including the inability to negotiate tight curves, a lack of power with poor braking and a rough uncomfortable ride. The class was extensively modified in subsequent years to overcome some of these shortcomings with the adoption of a more powerful diesel engine, uprated brakes and a plethora of internal and external detail improvements. Even with these changes the Class 142 was deemed unsuitable for working the tighter curves of the South Western rail system and the fleet was transferred post privatisation between NW Trains and Northern Spirit, where they are still used primarily on commuter routes between the major cities of the region.  Features: A Powered and a dummy car in each set  NEXT-18 DCC Decoder Socket Detailed bodies with flush glazing  Close coupling mechanism with corridor connectorScharfenberg coupling mechanism fitted as standard  All wheel drive and pick up on power unit  Directional lights on both carsIndependently controllable internal (where fitted) and external lighting  Accessory bag with optional fitted components  - N Scale

Hornby BR Class 37 37704 EWS (TT)

EWS Class 37 No.37704 - DCC Ready NEXT-18 Decoder Socket - TT:120 Scale

Graham Farish LMS 10000 BR Green (Late Crest)

LMS 10000 BR Green (Late Crest) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and now, this pioneering pair is available in N scale as part of the Graham Farish range. Features: Pristine BR Green (Late Crest) livery Running No. 10000 Six Headcode Lights & Brackets at each end Bodyside Steps Water Scoops Fitted Modified Exhaust Panels (with vent grilles) Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 127mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail, including separately fitted metal sand pipes Separately applied underframe and roof detail components Separate lamp irons fitted to each nose Detailed cab interior Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Passenger/Freight mode, switchable on Analogue control and with additional configurations available when used on DCC Cab lighting, switchable on/off (leading end, when used on DCC only) Authentic light colours and temperatures selected for each model based on era and application Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LMS 10000/10001 using recordings from real locomotives - Era 5 - N Scale

Graham Farish LMS 10001 BR Green (Late Crest)

LMS 10001 BR Green (Late Crest) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and now, this pioneering pair is available in N scale as part of the Graham Farish range. Features: Pristine BR Green (Late Crest) livery Running No. 10001 Six Headcode Lights & Brackets at each end Smooth Bodysides (No Steps) Water Scoops Fitted Modified Exhaust Panels (with vent grilles) Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 127mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail, including separately fitted metal sand pipes Separately applied underframe and roof detail components Separate lamp irons fitted to each nose Detailed cab interior Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Passenger/Freight mode, switchable on Analogue control and with additional configurations available when used on DCC Cab lighting, switchable on/off (leading end, when used on DCC only) Authentic light colours and temperatures selected for each model based on era and application Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LMS 10000/10001 using recordings from real locomotives - Era 5 - N Scale

Hornby Inter-City 125 High Speed Train Set (TT)

Inter-City 125 High Speed Train Set This train set includes: Class 43 HST power car numbered E43063 Class 43 HST dummy car numbered E43062 two Mk3 TS coaches numbered E42064 and E42065 a transformer a train controller a buffer stop a full curve a power straight a standard straight a 3rd full curve a left-hand point a re-railer. No.E43062 No. E43062 was built by British Rail Engineering Limited at Crewe in September 1977 and was outshopped in a BR blue and grey livery. The locomotive was first allocated to the Bounds Green (BN) depot and 43062 was initially part of the 254004 set. It was repainted in an InterCity Swallow livery after a few years in service. As British Railways prepared to be privatised, it sold its HSTs to Virgin in 1997, including 43062. The Class 43 locomotive was repainted in a Virgin red and black livery for use on CrossCountry services. Virgin handed over ten HST power cars in 2002. 43062 was given to Network Rail for use as part of the New Measurement Train (NMT). The locomotive was outshopped in a bright Network Rail yellow livery and because of this, the train was often referred to as the ‘Flying Banana’. The NMT travels at 125mph to monitor and record any faults on the track. 43062 was named ‘John Armitt’ after the chairman of the UK’s National Infrastructure Commission and had a red nameplate fitted. Loram UK won a Network Rail £8-million five-year contract to maintain the NMT in 2020. 43062 was recently overhauled at Loram Derby and returned to traffic in January 2024 with No. 43257 at the rear. No. E43063 No. E43063 was built by British Rail Engineering Limited at Crewe in September 1977 and outshopped in a BR blue and grey livery. The locomotive was first allocated to the Bounds Green (BN) depot and 43063 was initially part of the 254004 set. On 18th May 1991, 43063 could be seen at the Laira depot in a repainted InterCity Swallow livery and continued in service with this livery until 1997. As British Railways prepared to be privatised, it sold its HSTs to Virgin in 1997. 43063 was the first locomotive to be repainted in a Virgin CrossCountry red and black livery. Hon. Lord James Douglas-Hamilton QC & MP named the locomotive ‘Maiden Voyager’ to mark the launch of Virgin CrossCountry services, the same name given to Virgin’s first jumbo jet. Nameplates were fitted at Edinburgh station on 6th January 1997. 43063 ran in service with this name until the nameplates were removed in October 1999. In 2002, Virgin handed over 43063 to FGW who repainted it in a FGW blue and purple livery. Between 2006 and 2007, the locomotive faced an overhaul at Brush Traction and was fitted with an MTU 16V4000 R41 engine. FGW was renamed Great Western Railway in September 2015 and 43063 continued in service under the new name. Six GWR Class 43 HST power cars were stored at the Laira depot in 2020 and 43063 was among them, becoming a spares donor. - TT:120 Scale

Graham Farish LMS Ivatt 2MT 6409 LMS Black

LMS Ivatt 2MT 6409 LMS Black This Award Winning model certainly packs a punch when it comes to the detail, with separate metal handrails found throughout the locomotive and tender, lubricators and sand boxes along the running plate and separate pipework running from below the cab to the top feed on the boiler. The turned brass safety valves and whistle contrast beautifully with the firebox on which they are mounted, whilst inside the cab, the moulded back head detail has been decorated to pick out the individual gauges and controls. A hinged tender fall-plate provides the finishing touch to the highly impressive cab of this model. When it comes to performance it’s hard not to marvel as you watch the Walschaerts valve gear in motion. The powerful coreless motor provides drive to the centre pair of driving wheels, whilst all six driving wheels are fitted with separate metal bearings and a pair of traction tyres are fitted to the rear driving wheels to aid traction. Electrical pick-up comes via all six driving wheels and all six tender wheels, with a semi-permanent loco-tender coupling system to ensure the two stay firmly coupled at all times.  MODEL FEATURES: - Pristine LMS Black livery - Running No. 6409 - Accessory Pack - NEM Coupling Pockets - Powerful Coreless Motor - Loco-drive Mechanism - Tender Pick-ups - Speaker Fitted - Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A - Length 112mm - Era 3 - N Scale IVATT 2MT HISTORY: Designed by H. G. Ivatt for the London, Midland & Scottish Railway (LMS), 128 of these Class 2 Moguls were built for light freight and passenger duties. With construction commencing in 1946, just twenty examples were built by the LMS and the remaining 108 were outshopped by British Railways following Nationalisation in 1948. The construction programme was completed in 1952 and these Mixed Traffic locomotives would go on to operate on all the BR regions, with the exception of the Southern. Light axle loadings allowed the Ivatt 2MTs to be used on most routes including branch lines, where their almost enclosed cabs made them ideal for working tender first when no turning facilities existed. The design provided the basis for the BR Standard Class 2MT 2-6-0, and the two are very similar in appearance, with the Standard version having only a modified cab and tender profile to allow unrestricted route availability across the British network. With BR progressively closing more and more branch lines, and rationalising others – often employing new diesel multiple units to provide a more economical passenger service – duties for small locomotives like the Ivatt 2MTs began to disappear and the decline of the class began in 1961 when the first example was withdrawn. The Mogul’s versatility and its relatively modern design however ensured that many examples were still in traffic until the mid-1960s, but by 1967 all had been withdrawn. Thankfully, seven Ivatt 2MT have been preserved and the type is an ideal source of motive power for many of the trains running on heritage railways today.

Graham Farish LMS Ivatt 2MT 6418 LMS Black

LMS Ivatt 2MT 6418 LMS Black The popular LMS Ivatt 2MT returns to the Graham Farish N scale range following upgrades to allow SOUND FITTED models to be offered for the first time. With every model now featuring a Next18 DCC decoder interface and pre-fitted speaker. This Award Winning model certainly packs a punch when it comes to the detail, with separate metal handrails found throughout the locomotive and tender, lubricators and sand boxes along the running plate and separate pipework running from below the cab to the top feed on the boiler. The turned brass safety valves and whistle contrast beautifully with the firebox on which they are mounted, whilst inside the cab, the moulded back head detail has been decorated to pick out the individual gauges and controls. A hinged tender fall-plate provides the finishing touch to the highly impressive cab of this model. When it comes to performance it’s hard not to marvel as you watch the Walschaerts valve gear in motion. The powerful coreless motor provides drive to the centre pair of driving wheels, whilst all six driving wheels are fitted with separate metal bearings and a pair of traction tyres are fitted to the rear driving wheels to aid traction. Electrical pick-up comes via all six driving wheels and all six tender wheels, with a semi-permanent loco-tender coupling system to ensure the two stay firmly coupled at all times.  MODEL FEATURES: - Pristine LMS Black livery - Running No. 6418 - Accessory Pack - NEM Coupling Pockets - Powerful Coreless Motor - Loco-drive Mechanism - Tender Pick-ups - Speaker Fitted - Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A - Length 112mm - Era 3 - N Scale

Graham Farish LMS Ivatt 2MT 46447 BR Lined Black (Late Crest)

LMS Ivatt 2MT 46447 BR Lined Black (Late Crest) The popular LMS Ivatt 2MT returns to the Graham Farish N scale range following upgrades to allow SOUND FITTED models to be offered for the first time. With every model now featuring a Next18 DCC decoder interface and pre-fitted speaker. This Award Winning model certainly packs a punch when it comes to the detail, with separate metal handrails found throughout the locomotive and tender, lubricators and sand boxes along the running plate and separate pipework running from below the cab to the top feed on the boiler. The turned brass safety valves and whistle contrast beautifully with the firebox on which they are mounted, whilst inside the cab, the moulded back head detail has been decorated to pick out the individual gauges and controls. A hinged tender fall-plate provides the finishing touch to the highly impressive cab of this model. When it comes to performance it’s hard not to marvel as you watch the Walschaerts valve gear in motion. The powerful coreless motor provides drive to the centre pair of driving wheels, whilst all six driving wheels are fitted with separate metal bearings and a pair of traction tyres are fitted to the rear driving wheels to aid traction. Electrical pick-up comes via all six driving wheels and all six tender wheels, with a semi-permanent loco-tender coupling system to ensure the two stay firmly coupled at all times.  MODEL FEATURES: - Locomotive is now Preserved - Pristine BR Lined Black (Late Crest) livery - Running No. 46447 - Accessory Pack - NEM Coupling Pockets - Powerful Coreless Motor - Loco-drive Mechanism - Tender Pick-ups - Speaker Fitted - Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A - Length 112mm - Era 5 - N Scale

Graham Farish BR Standard 5MT with BR1 Tender 73006 BR Lined Black (Late Crest

BR Standard 5MT with BR1 Tender 73006 BR Lined Black (Late Crest) The Graham Farish model brings all the power and presence of the prototype to N scale and this masterpiece in miniature certainly packs a punch when it comes to the detail, with separate metal handrails found throughout the locomotive and tender, brass chimney and safety valves and separate pipework running from below the cab to the injectors on the boiler. Inside the cab, the moulded back head detail has been decorated to pick out the individual gauges and controls, whilst below the running plate, the Walschaerts valve gear is something to behold, especially when the locomotive is in motion. A powerful coreless motor provides drive to the centre driving wheels and each driving wheel is fitted with separate metal bearings whilst a pair of traction tyres are fitted to the rear driving wheels to aid traction. Electrical pick-up comes via all six driving wheels and all six tender wheels, with a semi-permanent loco-tender coupling system to ensure the two stay firmly coupled at all times. FEATURES: Pristine BR Lined Black (Late Crest) livery Running No. 73006 Coupled to a BR1 Tender Accessory Pack NEM Coupling Pockets Powerful Coreless Motor Loco-drive Mechanism Tender Pick-ups Speaker Fitted Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 136mm   - Era 5 - N Scale

Thomas the Tank Range Thomas The Tank Engine™ w/Moving Eyes DCC Ready

Thomas The Tank Engine Thomas is a blue six-wheeled (0-6-0 Tank) steam engine with the number 1 painted on his side tanks.  Thomas first appeared in 1946 in the 2nd book in Reverend Wilbert Awdry's The Railway Series, entitled 'Thomas the Tank Engine,' and he is the principal character in the 4 stories contained in the book. Thomas's best friends are Percy and Toby.  He works on a branch line with his coaches Annie and Clarabel. All of the locomotives in The Railway Series are based on real historical engines; Thomas has a resemblance to the London, Brighton & South Coast Railway's E2 class of 0-6-0 tank designed by Lawson Billinton in 1913. Includes - moving eyes - realistic resemblance to the character in the series - compatible with OO/HO gauge track and model railways - DCC ready - 3+ compliant  - suitable for young Thomas & Friends(TM) fans - OO Scale